Top 5 How To Burn A Brush Pile In The Rain The 178 Top Answers

You are looking for information, articles, knowledge about the topic nail salons open on sunday near me how to burn a brush pile in the rain on Google, you do not find the information you need! Here are the best content compiled and compiled by the Chewathai27.com team, along with other related topics such as: how to burn a brush pile in the rain how long to wait to burn a brush pile, how to burn a brush pile in winter, how to get green brush to burn, how to burn a slash pile, how to burn brush pile with diesel, best fuel to burn brush pile, burn pile rules, burning brush piles in texas

Unless the pile has grown too large, Fowler waits until rain is predicted then spreads a large tarp on top of each pile so that when the rain stops the area around the brush pile will be safe and the brush will be dry enough to burn.There are several ways to ignite a pile, but it is important to make sure that the brush pile is ignited safely. A drip torch, fusee (road flare), propane torch, or placing flammable fine fuel, such as hay or paper in the brush pile and lighting it are all safe methods.In land clearing, wait 21 days for a good burn. If not able to do so, do it when you lay it down.

Contents

How do you burn a brush pile fast?

There are several ways to ignite a pile, but it is important to make sure that the brush pile is ignited safely. A drip torch, fusee (road flare), propane torch, or placing flammable fine fuel, such as hay or paper in the brush pile and lighting it are all safe methods.

How long should a brush pile sit before burning?

In land clearing, wait 21 days for a good burn. If not able to do so, do it when you lay it down.

Will a brush pile burn in the rain?

They have to be piled up in an uncultivated area, away from buildings and woods, then left to dry out so that later, when the time is right, they can be burned. Deciding when to burn the brush is a delicate proposition, entirely dependent upon the weather. You can’t burn effectively in the rain.

Can you mix gas and diesel to burn brush?

Mixing Drip Torch Fuel

Gasoline helps carry the flame from the drip torch to the ground, diesel fuel provides a longer, residual burn time. When mixing fuel in drip torches, use 50% diesel fuel to 50% gasoline, in average (mild) temperatures.

How do you start a fire after it rains?

If it’s raining, work under a tarp so that all the materials stay dry. Carry a candle and chemical fire-starters. Cotton balls dipped in Vaseline, a flattened wax milk carton and cigar-size newspaper logs that have been dipped into melted paraffin make good fire-starters.

How do you ignite wet wood?

Start With Extra Tinder and Kindling

Examples include crumpled paper, cotton balls, dryer lint and dry grass. Pack the tinder in the center of your fire, and surround it with kindling, working vertically. The kindling, very small and thin pieces of wood, will slowly catch from the tinder fire.

How do you burn wet wood outside?

If the wood is still really wet on the outside, stand it up along the sides of the fire pit as the branches. Face the wet bark at the fire. After a few minutes, your wood may not be completely dry, but suitable for the fire. Placing the exposed inner core on the flame first will allow more time for the wet bark to dry.

How long will a large brush pile burn?

Due to the potential time to burn down 100-hour or 1,000-hour fuel types and soil in the brush pile, piles can potentially burn and smolder for several days or even weeks. In order to mitigate any fire spotting or escape, weather conditions must be appropriate for safe conditions while the piles burn.

Can you burn freshly cut branches?

When a living tree is cut down, the timber needs to age or “season” for a minimum of six to nine months before burning. Freshly cut wood, called green wood, is loaded with sap (mostly water) and needs to dry out first. It’s hard to light and once you get it going, it burns very efficiently and smokes horribly.

What can I do with a large brush pile?

Dealing with a large brush pile may seem like an overwhelming prospect, but there are actually a few easy ways to do so.

Burn the pile. If you simply do not have a lot of time and need the brush pile gone ASAP, then burning it is an option. …
Compost and use the brush yourself. …
Have an organic recycling center pick it up.

What is the best fuel to burn brush pile?

Ignite a burn pile with diesel fuel. Diesel fuel burns hotter and longer than other ignition sources. Wood piles made up of tree limbs, lumber and other organic debris ignite quickly with the use of diesel fuel. The fuel burns steadily through wet leaves and green branches.

How do you start a large burn pile?

Light the newspaper on fire to begin your burn pile. Ideally, it will light the bottom of the pile on the first try, which will then ignite the top of the pile, causing one large burn pile. You may, however, have to execute this process several times before you get an efficient burn pile going.

What can I do with a large brush pile?

Dealing with a large brush pile may seem like an overwhelming prospect, but there are actually a few easy ways to do so.

Burn the pile. If you simply do not have a lot of time and need the brush pile gone ASAP, then burning it is an option. …
Compost and use the brush yourself. …
Have an organic recycling center pick it up.

How To Burn A Brush Pile – Even If The Wood Is Green and Wet

how to burn a brush pile in the rain

Article author: www.yourpickenscounty.com
Reviews from users: 15765 Ratings
Top rated: 4.5
Lowest rated: 1
Summary of article content: Articles about how to burn a brush pile in the rain Updating …
Most searched keywords: Whether you are looking for how to burn a brush pile in the rain Updating
Table of Contents:

how to burn a brush pile in the rain

Article author: www.youtube.com
Reviews from users: 8855 Ratings
Top rated: 3.3
Lowest rated: 1
Summary of article content: Articles about How To Start A Wet Burn Pile! – YouTube Updating …
Most searched keywords: Whether you are looking for How To Start A Wet Burn Pile! – YouTube Updating Wow! This works really well! Burning out a huge pile of stumps from clearing around the property.Burn pile, Wet burn pile, How do you start a wet burn pile, How do you burn a stump, Burn, Burning, Burn out, Wet stumps
Table of Contents:

How To Start A Wet Burn Pile! - YouTube — How To Start A Wet Burn Pile! – YouTube

Article author: www.youtube.com
Reviews from users: 10226 Ratings
Top rated: 3.4
Lowest rated: 1
Summary of article content: Articles about Starting A Burn Pile – YouTube Updating …
Most searched keywords: Whether you are looking for Starting A Burn Pile – YouTube Updating getting the fire started on a lot clearingburning, burn, brush, pile, flame, fire, bomb, gas, land, clearing, starting, permit, explosion
Table of Contents:

Starting A Burn Pile - YouTube — Starting A Burn Pile – YouTube

Article author: extension.okstate.edu
Reviews from users: 13110 Ratings
Top rated: 4.5
Lowest rated: 1
Summary of article content: Articles about Managing Brush Piles | Oklahoma State University Updating …
Most searched keywords: Whether you are looking for Managing Brush Piles | Oklahoma State University Updating The appropriate time of year, weather conditions, pile size and ignition practices that should be used when burning brush.
Table of Contents:

Burn Law

Highlights

Time of Year

Weather Conditions

Size of Brush Pile

Ignition

Other Considerations

Alternatives

OSU Extension

Managing Brush Piles | Oklahoma State University

Article author: talk.newagtalk.com
Reviews from users: 19331 Ratings
Top rated: 3.4
Lowest rated: 1
Summary of article content: Articles about Viewing a thread – How long to wait, to burn tree piles, built using excavator Updating …
Most searched keywords: Whether you are looking for Viewing a thread – How long to wait, to burn tree piles, built using excavator Updating
Table of Contents:

Viewing a thread – How long to wait, to burn tree piles, built using excavator

Article author: backyardanswer.com
Reviews from users: 16177 Ratings
Top rated: 3.1
Lowest rated: 1
Summary of article content: Articles about How To Burn A Wet Brush Pile – Backyardanswer.com Decing when to burn the brush is a delicate proposition, … You can’t burn effectively in the rain. via. …
Most searched keywords: Whether you are looking for How To Burn A Wet Brush Pile – Backyardanswer.com Decing when to burn the brush is a delicate proposition, … You can’t burn effectively in the rain. via. Round bale of straw in a depression in the ground or dig a hole for it, cut it open and shake it out some. Pile the brush on top of it so it will fall inward
Table of Contents:

Can you burn a brush pile in the rain

How do you get wet branches to burn

How long should a brush pile sit before burning

How do you light a wet wood pile

How do I make a safe burn pile (video)

What can I do with a large brush pile

How do you get rid of burn pile ash

How do you start a large burn pile (video)

Does wet wood burn faster

How long do branches need to dry before burning

How soon can you burn freshly cut wood

How do you light a large brush pile (video)

Can you light a fire with wet wood

Can you burn wet leaves

Are brush piles a fire hazard

How big should a burn pile be

Managing Brush Piles

Managing Brush Piles

Burn Law

In Oklahoma, it is legal to burn brush piles as long as it is done properly. Brush pile burning should be conducted with the same considerations and planning as a prescribed burn, which includes:

Adequate firelines or firebreaks, Adequate manpower, Adequate fire fighting equipment and Follow notification requirements.

If the brush piles to be burned are located within city limits, check local laws and permit requirements before burning. For more information about burning within the law consult the publication Notification requirements and considerations for safe and lawful prescribed burning in Oklahoma.

Debris burning, which includes brush pile burning is one of the main causes of wildfires in Oklahoma. Brush piles within burn units are also one of the main causes of escaped fires for people conducting prescribed burns. Burning of brush piles can be difficult and a major problem for landowners if not done correctly.

Highlights

Best time to burn piles is May through June.

Have adequate suppression equipment available.

Make sure extended weather forecast calls for winds less than 15 mph and relative humidity greater than 40 percent.

Notify local fire department and neighbors.

Use other methods, such as grinding or scattering if fire is not a viable option for removing brush piles.

Time of Year

From a safety standpoint, time of year—or season—is the most important consideration when burning brush piles. May and June are generally the best times of the year to burn brush piles to minimize risk of escape. This time of year is best because the surrounding vegetation is usually actively growing with high moisture content. Burning brush piles during May and June reduces the probability of escaped fires. If a fire does escape, the fire behavior typically is slower moving and with shorter flames, making it easier to extinguish. Remember even though the vegetation is green, if there is enough old growth from previous years, a fire will still burn in the green vegetation. So make sure to monitor the pile while it is burning and have adequate suppression equipment available.

Contrary to popular belief, burning piles during the winter with snow on the ground is not advisable, because snow normally melts within a day or two in Oklahoma. Dormant vegetation will dry out very quickly during the winter after the snow melts. Grass fuels are considered 1-hour time lag fuels, which means it takes about one hour for those fuels to be as dry as the surrounding atmosphere. A brush pile burned one day with snow on the ground may be smoldering the next, when warmer temperatures melt the snow and strong winds dry out the adjacent fine fuels, blowing embers from the pile, igniting a wildfire. Remember, brush piles can smolder for several days, even weeks, and are an extreme fire risk when ignited in the dry, dormant conditions of winter.

May and June are the best times of the year to burn brush piles because the surrounding vegetation is usually green and actively growing. Burning brush piles during May and June reduces the otherwise high probability of escaped fire, and if a fire does escape, fire behavior is typically slower moving with shorter flames, making it easier to extinguish. Always have adequate suppression equipment available when burning piles.

Weather Conditions

Current weather conditions are another major concern when burning brush piles. Wind speed should be the first weather condition checked prior to burning. High winds are the major contributor to wildfires here in Oklahoma. Brush piles should be burned when wind speeds are less than 15 mph and not gusty for an extended period of time. Also, wind direction should be considered to keep embers and smoke from becoming a problem downwind. Relative humidity is the second most important weather variable to consider before burning piles. Burning brush piles when relative humidity remains greater than 40 percent can reduce the chances of embers igniting spotfires downwind.

Most of the fuel in a brush pile is comprised of tree limbs and trunks, which are considered 100-hour or 1,000-hour time lag fuels. Therefore, brush piles can often be burned on a day when relative humidity is high or even when it’s raining if the larger fuels have been dry for an extended period of time. Understanding this relationship between relative humidity and fuel moisture is important in order to minimize the risk of escape when burning a brush pile. Consult the OK-Fire website at:

OK-Fire Mesonet for current weather conditions, forecasts and 100- and 1,000-hour fuel moisture readings in your area.

When a suitable day is selected for burning a brush pile, check the weather forecast for at least the next three days. Remember, most brush piles do not completely combust in one day. Some may smolder for days or even weeks, especially when those brush piles contain large amounts of 1,000-hour time lag fuel (e.g., tree trunks), or if large amounts of soil were pushed in the pile. To reduce problems and to minimize the risk of escape, be sure the weather is going to be suitable for several days following the initial burn of the brush pile. If the weather is not going to be favorable, delay the burn or monitor with adequate fire fighting equipment until the weather is no longer a problem, which may be several days.

Brush piles should be burned when wind speeds are less than 15 mph and not gusty. Also, wind direction should be considered to keep embers and smoke from becoming a problem downwind. Burning brush piles when relative humidity remains greater than 40 percent can reduce the chances of embers igniting spitfires downwind.

Size of Brush Pile

Controlling brush pile size can reduce the risk of the fire escaping. Making brush piles small and compact will reduce the overall intensity and flame size of the pile. Smaller brush piles will also reduce the amount of smoke produced. Making smaller brush piles creates more piles to burn, but often this minimizes the risk of escape, and smoke management are more important concerns than the number of piles. Another way to minimize the risk of escape when burning brush piles is to wait until the fuel in the pile has higher moisture content; this will reduce fire intensity, but there may be problems with smoke, along with keeping the brush pile burning or completely combusting all the fuel in the pile.

Ignition

Care should be exercised when igniting brush piles. There are several ways to ignite a pile, but it is important to make sure that the brush pile is ignited safely. A drip torch, fusee (road flare), propane torch, or placing flammable fine fuel, such as hay or paper in the brush pile and lighting it are all safe methods. Igniting piles by pouring flammable liquids on the brush pile, followed by a lit match should be limited to less flammable fluids such as kerosene, charcoal lighter fluid, or an equal mixture of diesel and gasoline. Only pour flammable liquids on a small portion of the brush pile before igniting. If the brush pile does not ignite, be absolutely certain that all flames are extinguished before adding more flammable fuel and re-igniting. Do not try to ignite brush piles with gasoline due to its low flash point, highly flammable properties, and vapor, which is heavier than air. Using gasoline is very dangerous and can lead to serious injury and an escaped fire.

There are also ways to ignite a brush pile to reduce fire intensity and flame length, thus reducing the risk of escape. Igniting a brush pile on the downwind side will create a backfire (a fire moving or burning into the wind), causing the pile to burn slower, with lower heat intensity and shorter flame lengths. The brush pile will take longer to burn, but this is a good method to use when containment outweighs the amount of time needed to burn the brush pile.

Other Considerations

When monitoring burning piles, continue to consolidate the partially combusted fuel next to the brush pile to make sure all fuel is consumed and prevent it from being a pathway for fire to escape. Care should be used to prevent injury or equipment damage when working around the burning brush pile. It is best to perform this task with a front-end loader (or similar equipment) or by hand with a heavy-duty rake after most of the brush pile has burned.

Because of the amount of coarse fuel piled in a small area, heat effects on the soil can be extreme. In severe situations, the soil can become temporarily sterile and remain void of plants for an extended period of time. This can be somewhat avoided by burning brush piles with high fuel moisture content or when relative humidity is high, but be aware that this will increase the amount of time required for the brush pile to completely combust. The areas of bare soil are temporary and may create an opportunity for different plants to become established. In native plant communities, an ecological process called plant succession will reverse this situation over time.

Another concern about burning brush piles is the impact of heat on overstory trees. If brush piles are created in a forested or timbered setting, heat generated from burning can top kill many of the surrounding trees. Therefore, select appropriate areas to locate brush piles or consider scattering the debris and following up with a prescribed burn to reduce the impact of heat on the overstory.

Because of the amount of coarse fuel piled in a small area, heat effects on the soil can be extreme. In severe situations, the soil can become temporarily sterile and remain void of plants for an extended period of time. The areas of bare soil are temporary and may create an opportunity for different plants to become established. In native plant communities, an ecological process called plant succession will reverse this situation over time.

Alternatives

Brush piles are most often removed for aesthetic reasons or because they are simply in the way of other land use activities. However, they are not inherently bad. Brush piles can be left alone and allowed to decompose over time or to provide different habitat structure for wildlife. Species of wildlife using a brush pile depends on its composition. Brush piles comprised of a lot of small branches and limbs may attract a certain group of birds, mammals, reptiles and amphibians, whereas brush piles comprised mainly of large tree trunks may attract an entirely different group of wildlife. Brush piles usually provide the best cover for wildlife during the first two or three years or before they become too decomposed and more tightly packed.

If leaving piles to decompose is not aesthetically acceptable and burning or mulching is not possible, consider scattering the debris. This disperses the fuels and reduces problems, especially if prescribed burning will be used in follow-up management. Grinding or mulching the brush pile is another alternative to burning. It is much more expensive, but may be the only alternative when concerns about escaped fire is a major consideration or if the brush piles are located within city limits or other areas where burning is not practical or allowed.

Grinding or mulching the brush pile is another alternative to burning. It is much more expensive, but may be the only alternative when minimizing the risk of escape is a concern or if the brush piles are located within city limits or other areas where burning is not allowed.

In forested or timbered areas, the heat generated from burning brush piles can top kill many of the surrounding trees. Therefore, select appropriate areas to locate brush piles or consider scattering the debris and following up with a prescribed burn to reduce the impact of heat on the overstory.

John R. Weir

Research Associate, Natural Resource Ecology and Management

Russell L. Stevens

Wildlife and Range Specialist

The Samuel Roberts Noble Foundation

How long to wait, to burn tree piles, built using excavator

You are logged in as a guest. ( logon

How long to wait, to burn tree piles, built using excavator

4WD

Posted 11/28/2013 20:44 (#3477702)

Subject: How long to wait, to burn tree piles, built using excavator

NE part of SW Iowa Got 5 piles to burn, 2 small, 2 meduim and one huge one.

The trees were just removed almost 3 weeks ago, stumps cut off before making large piles(separate piles for stumps=will let them set, not even trying them)

Excavator guy says wait 3 weeks, at least; I’m not so sure; but they are nice tight piles.

What your experience/opinion?

Probably use old, used oil and gas/diesel to get them started, on a calm day.

Wabd Farmer

Posted 11/28/2013 20:47 (#3477709 – in reply to #3477702)

Subject: Re: How long to wait, to burn tree piles, built using excavator

I tend to try and wait as long as possible, then we still have to stay on them with the dozer and keep them rounded up to get them to burn completely up.

ruzijobeans

Posted 11/28/2013 20:47 (#3477711 – in reply to #3477702)

Subject: Re: How long to wait, to burn tree piles, built using excavator

central wi I’d wait a month minimum and make sure they freeze good and hard. Use hay or straw bales and dump a 3:1 diesel to gas mixture on the bales to start them. DNR approved in WISC. Don’t ask me how I know!

wade4545

Posted 11/28/2013 20:48 (#3477714 – in reply to #3477702)

Subject: Re: How long to wait, to burn tree piles, built using excavator

I’d say leave them for a year but I think some guys say within two weeks or wait a year.

ndebt

Posted 11/28/2013 20:51 (#3477724 – in reply to #3477702)

Subject: RE: How long to wait, to burn tree piles, built using excavator

Southeast Alabama I was told by a forester to wait 28 days from piling. He said it creates gasses that help incinerate the wood. We did it last year on land that we cleared and they seemed to burn up really well. He told me if you wait to long the “fermentation” quits then you need to wait until the wood is seasoned or dry to get it to burn up.

Detroit

Posted 11/28/2013 20:52 (#3477732 – in reply to #3477702)

Subject: Re: How long to wait, to burn tree piles, built using excavator

Crawfordsville, Arkansas 7 days. Works every time.

collegeboy

Posted 11/28/2013 20:54 (#3477734 – in reply to #3477702)

Subject: RE: How long to wait, to burn tree piles, built using excavator

Slicker than a Yes album. Slicker than a Yes album. Neighbor had this pile, was going to wait, burned it pretty well green. Once you get them hot, doesn’t matter how fresh or old they are, they will burn completely.

(TreePile.jpg)

Attachments

—————-

TreePile.jpg (67KB – 559 downloads)

tater1086

Posted 11/28/2013 21:01 (#3477757 – in reply to #3477702)

Subject: Re: How long to wait, to burn tree piles, built using excavator

Snipesville, GA I agree with collegeboy, get it good and hot and it will burn. Green wood tends to make better coals that help keep the fire going.

KMech

Posted 11/28/2013 21:05 (#3477765 – in reply to #3477702)

Subject: Re: How long to wait, to burn tree piles, built using excavator

Missouri If you can keep the rootballs in them from getting too large, they’ll burn on the first day, if you have enough dry wood to get it started, and keep pushing the pile together. It’s got to be packed tight to keep burning when green.

poor loser

Posted 11/28/2013 21:05 (#3477771 – in reply to #3477702)

Subject: Re: How long to wait, to burn tree piles, built using excavator

north central ky north central ky Start burning as soon as you get the pile built. I used to think you needed to wait but now we burn them green and they will burn hotter and slower. The piles will burn up to nothing as long as you periodically tighten the pile up. Here, the fence rows we have been taking out have a lot of honey suckle vines and have figured out if you wad up a big ball of them and put them up under the edge of your pile you can light the pile with a hand held propane torch in less than a minute. No fuel needed. It also is nice that you won’t have to bring your machine back out just get it all done at once.

verdenjen

Posted 11/28/2013 21:10 (#3477779 – in reply to #3477765)

Subject: Re: How long to wait, to burn tree piles, built using excavator

I HAD A NEIGHBOR WHO TOOK OUT ONE WHOLE TREE GROVE ONE MILE LONG..

I JUST THINK IT IS A SHAME TO DESTROY SOMETHING THAT TOOK 40 YEARS TO ESTABLISH JUST TO RAISE MORE $4.00 CORN.. PEOPLE DON’T SEEM TO REMEMBER THE DUST BOWL..OUR WORLD IS A CHANGING

greasegun

Posted 11/28/2013 21:12 (#3477783 – in reply to #3477702)

Subject: Re: How long to wait, to burn tree piles, built using excavator

W.C. Mo. A 10 -15 mph breeze helps. Burnt several piles this fall from clearing in late summer. Keep pushing together and even the stumps burnt to nothing-only a big pile of ash. To the Op , I would attempt to burn the stumps in the brush fire. If they do not burn completely- push them to next pile and burn again. A few buckets of hot embers and glowing stumps are good fire starters for the next pile..

farmer3315

Posted 11/28/2013 21:12 (#3477784 – in reply to #3477702)

Subject: Re: How long to wait, to burn tree piles, built using excavator

SE Mo Dig a hole push some in it, start the fire and keep shoving them in. They will burn as fast as you can get them in the hole. If you are allowed to this, not a problem here

johnnycash

Posted 11/28/2013 21:15 (#3477790 – in reply to #3477784)

Subject: Re: How long to wait, to burn tree piles, built using excavator

Gods Country (That we took from the Indians) WC IA farmer3315 – 11/28/2013 20:12

Dig a hole push some in it, start the fire and keep shoving them in. They will burn as fast as you can get them in the hole. If you are allowed to this, not a problem here

Agreed. Get them going in a hole. It makes a hot fire.

Luke Skywalker

Posted 11/28/2013 21:22 (#3477810 – in reply to #3477702)

Subject: Good Fire Starter…

Arva, Ontario Inner Tubes.

No cables, belts etc like tires have. They burn clean and give off a lot of heat to get you going.

Go to your nearest tire shop. They usually have a pile of tubes and flaps from old tube type truck tires, and if you can find a good genuine rubber tube out of a radial tractor tire, they are exceptionally good.

My trackloader guy that does all of my work starts a central pile as he is clearing and keeps adding to it. Keeps the fire tight around the outside so that the heat chimneys up the middle. By the time he is done clearing, the fire is pretty well done too.

Ken

young buck1

Posted 11/28/2013 21:25 (#3477819 – in reply to #3477810)

Subject: Re: How long to wait, to burn tree piles, built using excavator

Sibley county Minesota Before the snow packs in or after the snow melts otherwise it sucks trying to burn them.

boog

Posted 11/28/2013 21:26 (#3477822 – in reply to #3477702)

Subject: Re: How long to wait, to burn tree piles, built using excavator

We don’t wait. Cut, pile & burn the same day. Once you get the fire going it will stay good & hot, just keep piling the trees on as you go. I like to start the pile with a hedge limbs & other smaller limbs then put the bigger logs on top to smash the limbs down. Makes the fire easier to start & hedge burns hot.

4WD

Posted 11/28/2013 21:26 (#3477823 – in reply to #3477779)

Subject: Re: How long to wait, to burn tree piles, built using excavator

NE part of SW Iowa Not really gaining any farm ground, this is in preparation for more tile lines, and their outlets (just trying to get that field’s “wet spots” under control, using tile) All sidehill wet spots.

Tree roots already have one, old tile line plugged and water is spurting up/bubbling, vertically(coming up about 4 feet, from underground), about 35 feet away from the correct old tile outlet; which is dry.

We just didn’t want extra problems, with roots, on any of the new tile outlets/lines, in the other drainage areas. (New tile not in yet, may have to wait till Spring, even though we’ve been on their list for 9 months)

Seems like we lose 5 acres, to sidehill wet spots, in that field. Only on a dry Spring, can we ever get thru them.

SteigerSt320

Posted 11/28/2013 21:28 (#3477830 – in reply to #3477702)

Subject: Re: How long to wait, to burn tree piles, built using excavator

Northeast Louisiana In land clearing, wait 21 days for a good burn. If not able to do so, do it when you lay it down.

4WD

Posted 11/28/2013 21:36 (#3477845 – in reply to #3477702)

Subject: RE: How long to wait, to burn tree piles, built using excavator

NE part of SW Iowa Excavator is long gone.(hired done, he did a great job)

Farm 11 miles away, only loader tractor is open tractor and small loader = Cold ride, up Hwy 71.

Looks like we might have a couple “warmer days” ; so It just might work out.

farmboy99

Posted 11/28/2013 21:42 (#3477856 – in reply to #3477702)

Subject: RE: How long to wait, to burn tree piles, built using excavator

SE South Dakota Have a little bit of dead wood to get the fire started underneath the trees cut that day and fire it up. Then keep it piled close with a loader and the green wood will burn right up. I did this exact thing two days ago and it worked perfectly. Green, green ash and all.

Jim J

Essman

Posted 11/28/2013 21:45 (#3477869 – in reply to #3477856)

Subject: Re: How long to wait, to burn tree piles, built using excavator

NE AR Always heard burn in 5 days or wait 5 weeks.

greenfarmer

Posted 11/28/2013 22:21 (#3477943 – in reply to #3477757)

Subject: Re: How long to wait, to burn tree piles, built using excavator

Central Minnesota Last fall we were cleaning out tree lines and drainage ditches… Dug a hole with the excavator, and as fast as they could cut them down, and trim up enough that I could carry with the bobcat and grapple I was dumping them in the hole and burning. When we were done there was nothing but ashes left. Yeah, waiting would be nice, and might be the “right” way to do it. But it was nice and warm, and I didn’t feel like going back out there later to do what we could do now. Burnt them asap.. Didn’t hurt a bit. Used a little diesel to get it going, and once it was burning, it got hot…

semosandfarmer

Posted 11/28/2013 22:30 (#3477961 – in reply to #3477702)

Subject: Re: How long to wait, to burn tree piles, built using excavator

East Prairie, MO East Prairie, MO ASAP always works for me.

Bamcustoms

Posted 11/28/2013 22:43 (#3477982 – in reply to #3477702)

Subject: Re: How long to wait, to burn tree piles, built using excavator

Lakeville, MN Deep hole and get ready to try and keep it full. A good fire pit will burn anything. Ps build a stoker/extension for your excavator to push the wood down in the hole and keep the boom out of the fire.

Edited by Bamcustoms 11/29/2013 07:43

kritzy

Posted 11/28/2013 23:21 (#3478027 – in reply to #3477702)

Subject: Re: How long to wait, to burn tree piles, built using excavator

red river valley se of fargo Old timers here say 3 days, 3 weeks, or three years. Always thought that was odd but seems to sorta fit what everyone is saying.

150 farmer

Posted 11/28/2013 23:26 (#3478030 – in reply to #3478027)

Subject: Re: How long to wait, to burn tree piles, built using excavator

Pontiac, IL. Someone did mention: Burn before the pile is full of snow. Can’t believe no one mentioned; Don’t try to burn when temperature is below zero. Speaking from experience, about 15 years ago, I tried burning several big piles, that had been piled with an excavator, when the temperature was -15 degrees. Used 60 gallon of diesel fuel, but they just would not “take off”. (burned a small hole in each pile where I was dumping the fuel out of the excavator bucket.) Came back a week later, when the temperature was +30 degrees, and with only a few gallon of diesel fuel, I had EVERYTHING burning. Wouldn’t have believed it if I had not seen it myself. 45 degrees difference in temperature, made a WORLD of difference.

Edited by 150 farmer 11/28/2013 23:27

postoak

Posted 11/28/2013 23:33 (#3478038 – in reply to #3477702)

Subject: Re: How long to wait, to burn tree piles, built using excavator

s.c. Illinois s.c. Illinois Within 4 days or wait 40 days. If you want to burn them without tires, stuff some straw on the upwind side, light it and fire up the leaf blower and blow on the straw. You will have a hot fire in a damn hurry.

Mike SE IL

Posted 11/29/2013 00:59 (#3478080 – in reply to #3478038)

Subject: Re: How long to wait, to burn tree piles, built using excavator

West Union, Illinois West Union, Illinois Either light it as soon as possible or look at it for months while it dries out. Build the pile on top of a couple bales of diesel soaked straw. I’ve heard sometimes a tires has been misplaced but wouldn’t know a thing about that. Works better with a track hoe to knock the dirt off the roots and pile and then adjust while burning.

Oh, and while the burning in a hole idea is great, don’t do it in Illinois. You can burn unprocessed wood on the site it was grown and bury the ashes, but burning it in a hole will get an EPA inspector so worked up you will have a bad day.

Dennis SEND

Posted 11/29/2013 01:38 (#3478087 – in reply to #3478080)

Subject: Re: How long to wait, to burn tree piles, built using excavator

I took out a 1/2 mile row this summer, wasn’t planning on burning them right away cause I really didn’t think “green” trees would burn but anyways after I had all the trees down had a neighbor push them up into piles, he made many more piles than needed so I decided to burn some of them and haul the stuff that didn’t burn to others but they burned so good I did them all

I did it on a HOT day was probally 80+ and had a 30 MPH wind (field was green soybeans so didn’t have to worry about fire getting away, however it kill/burn leaves on plants almost 100 feet away ) but anyways lit on a Friday afternoon on Saturday I took the excavator stoked and restacked the stuff that didn’t burn right away and had really nice fires going again, did the same thing on Monday to what was left, didn’t really want to dig holes so I used a sidedump to haul the stuff out that didn’t burn and only ended up with 4 loads on a 1/2 mile of trees was very happy with how they burned, I had the tress down from 6 days to about a month when I burned them most were in the 6-14 day range after I dug them out.

I used about 5 gallons of used oil and old diesel fuel to start 2 piles, the others started with just the big propane torch pile took off so quickly had to almost run away as it got hot almost immediately.

I have almost 20 acres of shelter belts to do this summer, have a pair of bigger excavators ( 330C LC and a 240D LC ) lined up to help, and am looking at either buying or renting a dozer to help also, plan on burning piles about a week after removal again.

ezzard

Posted 11/29/2013 05:15 (#3478112 – in reply to #3477702)

Subject: Re: How long to wait, to burn tree piles, built using excavator

SE IA No need to wait. Keep the pile pushed together and it’ll burn.

Brad SEIN

Posted 11/29/2013 05:43 (#3478125 – in reply to #3478112)

Subject: Re: How long to wait, to burn tree piles, built using excavator

A leaf blower is the best way to get a fire hot. Start a little bit of dry wood (pallets work for us) on the bottom of the pile. Blow on it with the leaf blower until you can’t stand there any more. You will be amazed at the amount of heat you will create and fast.

buenymayor

Posted 11/29/2013 06:04 (#3478134 – in reply to #3478125)

Subject: Re: How long to wait, to burn tree piles, built using excavator

WC Franklin Co., In. WC Franklin Co., In. Brad SEIN – 11/29/2013 05:43

A leaf blower is the best way to get a fire hot.

A leaf blower and a way to keep pushing the fire together, and you will get it to burn down to almost nothing. We typically light them the same day we cut them.

farmermatt

Posted 11/29/2013 07:43 (#3478297 – in reply to #3477702)

Subject: Re: How long to wait, to burn tree piles, built using excavator

West Central Missouri I usually light it when the fifth tree hits the ground

deerecraig

Posted 11/29/2013 07:45 (#3478306 – in reply to #3477702)

Subject: Re: How long to wait, to burn tree piles, built using excavator

Northwest Indiana Burn just as well day they get piled as later on, plus equipment is usually still there..

AVP_Matt

Posted 11/29/2013 09:16 (#3478546 – in reply to #3477734)

Subject: Re: How long to wait, to burn tree piles, built using excavator

Hennepin, IL +1 get er hot and just keep adding to it/stirring it, there wont be anything left

4WD

Posted 11/29/2013 19:24 (#3479723 – in reply to #3477702)

Subject: RE: How long to wait, to burn tree piles, built using excavator

NE part of SW Iowa Burnt one small pile, today = wind was in right direction and no fear of anything else burning.(picked up small sticks and branches, while it burns)

Wind direction, was almost perfect for the huge pile, BUT neighbor still has corn standing in next field(right across the fence) so that’s not going to happen until he gets done combining corn.(surprized it’s not done, because he tends to put stock cows in there)

Install front blade on 4440 w/cab, so I may try 2 other piles tomorrow(1 medium, and 1 small). Winds 5-10, predicted.

Thank for all the replies.

shoop

Posted 1/24/2015 23:20 (#4336012 – in reply to #3477702)

Subject: RE: How long to wait, to burn tree piles, built using excavator

M All I had left of a grove . Maybe started 2 burning 2 months after cuting down grove

shoop

Posted 1/24/2015 23:21 (#4336013 – in reply to #3477702)

Subject: RE: How long to wait, to burn tree piles, built using excavator

How To Burn A Wet Brush Pile

Round bale of straw in a depression in the ground or dig a hole for it, cut it open and shake it out some. Pile the brush on top of it so it will fall inward as it burns. Then put another layer of straw over the top to keep the heat in and pour some diesel and/or used oil over the top. via

Can you burn a brush pile in the rain?

They have to be piled up in an uncultivated area, away from buildings and woods, then left to dry out so that later, when the time is right, they can be burned. Deciding when to burn the brush is a delicate proposition, entirely dependent upon the weather. You can’t burn effectively in the rain. via

How do you get wet branches to burn?

Gather some kindling, dead wood that is about as wide as your finger or less.

Use a sharp knife/hatchet to strip away as much bark and wet wood as possible.

If you can use a hatchet to split larger pieces of wood into kindling, this will expose the drier inner layers.

via

How long should a brush pile sit before burning?

In land clearing, wait 21 days for a good burn. If not able to do so, do it when you lay it down. via

How do you light a wet wood pile?

The trick to getting wet wood to light is to generate a lot of heat when you first start your fire – that means using lots of extra kindling. Cut triple or quadruple the amount of fine kindling and build yourself a thick teepee with a good amount of tinder to get it started. via

How do I make a safe burn pile? (video)

What can I do with a large brush pile?

The best way to take care of piled up brush is to make “Biochar.” This garden enhancer has been shown to improve soil quality for decades after first application. And, is cheap and easy to make from your own brush. via

How do you get rid of burn pile ash?

Removing Ashes Safely

Remove the ashes from the fire pit with a scoop, spade or shovel. Deposit the ashes in an empty metal container that has a lid, such as a small metal trash can. Pour a little water over the ashes in the can to ensure there’s no risk of fire. Place the lid on the can. via

How do you start a large burn pile? (video)

Does wet wood burn faster?

Firewood that is too wet to burn will be harder to light and harder to keep burning, and may produce more smoke than usual. Wet firewood can have moisture visible under the bark or feel wet to the touch, and will have a moisture content level higher than 20%. via

How long do branches need to dry before burning?

After cutting green wood, allow it to sit outdoors for six to 12 months to allow it to properly “season,” or dry. Burning the wood after this period will yield the best results. via

How soon can you burn freshly cut wood?

When a living tree is cut down, the timber needs to age or “season” for a minimum of six to nine months before burning. Freshly cut wood, called green wood, is loaded with sap (mostly water) and needs to dry out first. It’s hard to light and once you get it going, it burns very efficiently and smokes horribly. via

How do you light a large brush pile? (video)

Can you light a fire with wet wood?

When wood is wet, you need a lot more tinder and kindling than you do with dry wood. Plan to use up to four times as much to get a good fire going. via

Can you burn wet leaves?

Moist leaves, which tend to burn slowly, give off more smoke than do dry leaves. These moist leaves are more likely to also give off chemicals called hydrocarbons, which irritate the eyes, nose, throat and lungs. via

Are brush piles a fire hazard?

It’s also important to remember that a brush pile can be a fire hazard, and should not be located close to the house for just this reason. The best brush pile is more than just a pile of branches. It will have open space within it, and entry and exit holes all along it. A brush pile provides both food and shelter. via

How big should a burn pile be?

Three to five feet is a pile height for experienced burners. Taller piles can easily generate enough heat to scorch nearby trees. Heat from large piles makes it difficult to get close to control them. via

So you have finished reading the how to burn a brush pile in the rain topic article, if you find this article useful, please share it. Thank you very much. See more: how long to wait to burn a brush pile, how to burn a brush pile in winter, how to get green brush to burn, how to burn a slash pile, how to burn brush pile with diesel, best fuel to burn brush pile, burn pile rules, burning brush piles in texas

Top 5 How To Burn A Brush Pile In The Rain The 178 Top Answers

How do you burn a brush pile fast?

How long should a brush pile sit before burning?

Will a brush pile burn in the rain?

Can you mix gas and diesel to burn brush?

How do you start a fire after it rains?

How do you ignite wet wood?

How do you burn wet wood outside?

How long will a large brush pile burn?

Can you burn freshly cut branches?

What can I do with a large brush pile?

What is the best fuel to burn brush pile?

How do you start a large burn pile?

What can I do with a large brush pile?

how to burn a brush pile in the rain

How To Start A Wet Burn Pile! – YouTube

Starting A Burn Pile – YouTube

Managing Brush Piles | Oklahoma State University

Viewing a thread – How long to wait, to burn tree piles, built using excavator

How To Burn A Wet Brush Pile – Backyardanswer.com

Managing Brush Piles | Oklahoma State University

In the Garden: Before you burn that brush pile

Pile Burning Regulations and Guidance in the Rainy Season | Fire Safe Sonoma

Managing Brush Piles

How long to wait, to burn tree piles, built using excavator

How To Burn A Wet Brush Pile

Leave a Comment Cancel reply