You are looking for information, articles, knowledge about the topic nail salons open on sunday near me how to dry green stuff faster on Google, you do not find the information you need! Here are the best content compiled and compiled by the Chewathai27.com team, along with other related topics such as: how to dry green stuff faster green stuff hair dryer, curing green stuff, how to use green stuff, green stuff not hardening, liquid green stuff, when can you paint green stuff, milliput cure time, milliput vs green stuff
The speed that green stuff cures at is affected by temperature. The warmer it is the faster it will cure. Cooling it down will slow curing time but the putty becomes stiffer the colder it gets, so it doesn’t balance out. However, speeding up drying time might be exactly what you need.The original Kneadatite (best known as Green Stuff) is used by model makers and hobbyists for conversions, filling mold lines and sculpting miniatures. Hardens fast with a 20-30 minutes worktime for molding & only 8 hours to fully dry.The working life of Green Stuff varies depending on how you store it, mix it, and work it, but the manufacturer PSI suggest a mixed ‘work life’ of between 1 1/2 to 2 hrs, with a cure time of around 4 to 5 hours reaching ‘ultimate hardness’ from 20 to 24 hours after mixing.
Contents
How long till Green Stuff take to dry?
The original Kneadatite (best known as Green Stuff) is used by model makers and hobbyists for conversions, filling mold lines and sculpting miniatures. Hardens fast with a 20-30 minutes worktime for molding & only 8 hours to fully dry.
How long does Army Painter Green Stuff take to dry?
The working life of Green Stuff varies depending on how you store it, mix it, and work it, but the manufacturer PSI suggest a mixed ‘work life’ of between 1 1/2 to 2 hrs, with a cure time of around 4 to 5 hours reaching ‘ultimate hardness’ from 20 to 24 hours after mixing.
How do you make Green Stuff harder?
First, mix a batch of green stuff. Then a batch of milliput of roughly equal volume. Then mix the two together. The resulting compound will squish into your mold easier and be very stiff after cure.
Can you sand Green Stuff?
Green Stuff is one of the sculpting compounds made by Kneadatite. I have used brown and green and like em both. And it can indeed be sanded once cured. Go ahead, click the pic.
How do you dry Green Stuff?
At 150 degrees Fahrenheit you can get green stuff to set in 10 minutes. I only recommend the toaster oven on all metal models, or if you are making your green stuff piece separate of the plastic model.
Is MIlliput better than Green Stuff?
Re: MIlliput fs Green stuff
I find it too granular and not easy enough to push and pull around. Green Stuff does that really nicely, but is more flexible and can be really sticky so I like to mix it with a bit of ProCreate which holds detail better and reduces the stickiness (but by itself isn’t sticky enough).
Is Army Painter Green Stuff toxic?
Greenstuff contains epoxy constituents so it is harmful if swallowed.
Do you need to glue green stuff?
If fresh, then glue is rarely required – just press on the model and shape then leave to cure. The only exception to this would be when you are joining two metal or resin pieces together and they do not fit correctly – there is a gap.
Is green stuff carcinogenic?
“The Kneadatite Blue/Yellow (green stuff) is NOT “carcinogenic”. That was a rumor started by a competitor back in 1992-3.
Is MIlliput better than Green Stuff?
Re: MIlliput fs Green stuff
I find it too granular and not easy enough to push and pull around. Green Stuff does that really nicely, but is more flexible and can be really sticky so I like to mix it with a bit of ProCreate which holds detail better and reduces the stickiness (but by itself isn’t sticky enough).
How does Green Stuff work?
Green Stuff is a two-part epoxy putty used by hobbyists and modellers to sculpt with. The blue part is a hardener and the yellow part is the filler. Mixing both together creates a green putty that hardens at room temperature.
how to dry green stuff faster
- Article author: shop.thearmypainter.com
- Reviews from users: 40387
Ratings - Top rated: 4.6
- Lowest rated: 1
- Summary of article content: Articles about how to dry green stuff faster Updating …
- Most searched keywords: Whether you are looking for how to dry green stuff faster Updating
- Table of Contents:
The Home of Halflings.
- Article author: www.thebattleforge.co.uk
- Reviews from users: 18736 Ratings
- Top rated: 4.0
- Lowest rated: 1
- Summary of article content: Articles about The Home of Halflings. Updating …
- Most searched keywords: Whether you are looking for The Home of Halflings. Updating The home of Halflings, Giants and more Wargaming Figures, halfling, giant, chaos dwarf, hobbit, 28mm,
- Table of Contents:
Your cart contains…
Welcome to TheBattleforge Miniatures
Recently Added Products
Stronger Green Stuff? – + GENERAL PCA QUESTIONS + – The Bolter and Chainsword
- Article author: bolterandchainsword.com
- Reviews from users: 15868 Ratings
- Top rated: 4.5
- Lowest rated: 1
- Summary of article content: Articles about Stronger Green Stuff? – + GENERAL PCA QUESTIONS + – The Bolter and Chainsword Updating …
- Most searched keywords: Whether you are looking for Stronger Green Stuff? – + GENERAL PCA QUESTIONS + – The Bolter and Chainsword Updating So I made a copy of a GK halberd using green stuff but it’s increadibly flexible did I not mix up the GS right or should I be using something else?
- Table of Contents:
Recommended Posts
Important Information
Can you sand green stuff once itâs dried? – HissTank.com
- Article author: www.hisstank.com
- Reviews from users: 20569 Ratings
- Top rated: 4.8
- Lowest rated: 1
- Summary of article content: Articles about Can you sand green stuff once itâs dried? – HissTank.com Updating …
- Most searched keywords: Whether you are looking for Can you sand green stuff once itâs dried? – HissTank.com Updating Questions Can you sand green stuff once itâs dried?, G.I. Joe, GI Joe, Cobra, G.I. Joe Movie, GI Joe Movie, Hiss Tank, Cobra Hiss, Destro, Snake Eyes, Cobra Commander, Duke, Storm Shadow, Baroness, Images, Discussion, Forum, NewsCan you sand green stuff once itâs dried? I’m assuming you can but want to make sure before trying it. Thanks
- Table of Contents:
How can I make GreenStuff harden faster? – Forum – DakkaDakka
- Article author: www.dakkadakka.com
- Reviews from users: 37550 Ratings
- Top rated: 3.6
- Lowest rated: 1
- Summary of article content: Articles about How can I make GreenStuff harden faster? – Forum – DakkaDakka As you may know, green stuff hardening is a chemical reaction, so really the only way to speed it up is to get the molecules moving and … …
- Most searched keywords: Whether you are looking for How can I make GreenStuff harden faster? – Forum – DakkaDakka As you may know, green stuff hardening is a chemical reaction, so really the only way to speed it up is to get the molecules moving and …
- Table of Contents:
Green Stuff: Increase Curing Speed
- Article author: www.coolminiornot.com
- Reviews from users: 9830 Ratings
- Top rated: 3.9
- Lowest rated: 1
- Summary of article content: Articles about Green Stuff: Increase Curing Speed 3.5 – How do I get Kneadatite\\epoxy putty to cure faster/slower? Two-part epoxy putties harden by a chemical reaction of the two components. …
- Most searched keywords: Whether you are looking for Green Stuff: Increase Curing Speed 3.5 – How do I get Kneadatite\\epoxy putty to cure faster/slower? Two-part epoxy putties harden by a chemical reaction of the two components. Hey guys
I really enjoy sculpting, and have been doing so for a while. One thing that is starting to annoy me is waiting…Im not very patient when I really get into something and realise I cant touch it for two hours.
Now I was wondering what methods can be used to speed up the curing process of green stuff.
Ive heard of using different %\’s of the two parts of the expoxy putty, but Ive found a consistency that I find comfortable to work with and dont really want to change it.
Ive
- Table of Contents:
Green Stuff Increase Curing Speed
A new way to cure greenstuff… – Tips and Advice: Sculpting – Reaper Message Board
- Article author: forum.reapermini.com
- Reviews from users: 34293 Ratings
- Top rated: 4.5
- Lowest rated: 1
- Summary of article content: Articles about A new way to cure greenstuff… – Tips and Advice: Sculpting – Reaper Message Board Epoxy pieces should cure faster. I had one concern. Some curing epoxy clays are soluble in water, they form a slurry when rubbed with water. I … …
- Most searched keywords: Whether you are looking for A new way to cure greenstuff… – Tips and Advice: Sculpting – Reaper Message Board Epoxy pieces should cure faster. I had one concern. Some curing epoxy clays are soluble in water, they form a slurry when rubbed with water. I … Okay, I’ve been wanting to sculpt. I like Premo polymer clay, but it doesn’t take mold-making well, nor adhere to metal well. I like the epoxy clays, but whenever I’ve tried to cure them quickly ( The coffee can + lamp, heatgun ), they always get too hot and balloon/bubble up. Temperature control…
- Table of Contents:
Recommended Posts
Join the conversation
Greenstuff Hardening [Archive] – Privateer Press Forums
- Article author: privateerpressforums.com
- Reviews from users: 24915 Ratings
- Top rated: 4.4
- Lowest rated: 1
- Summary of article content: Articles about Greenstuff Hardening [Archive] – Privateer Press Forums Use some heat. Place it under a lamp for instance. Also, using a little more of the blue stuff when you mix, will make it cure a bit faster. But … …
- Most searched keywords: Whether you are looking for Greenstuff Hardening [Archive] – Privateer Press Forums Use some heat. Place it under a lamp for instance. Also, using a little more of the blue stuff when you mix, will make it cure a bit faster. But … cheers, article, handcannon, http://handcannononline.com/blog/2011/11/03/bodged-together-the-easybake-oven-for-sculpting-3, hardening, geist, greenstuffDoes anyone have a good advice for accelerating the hardening process of greenstuff? I’ve just modelled some bases and don’t really want to wait so long to get to use them :p
- Table of Contents:
How to use Green Stuff Modelling Putty | Kneadatite
- Article author: kneadatite.com
- Reviews from users: 44061 Ratings
- Top rated: 3.2
- Lowest rated: 1
- Summary of article content: Articles about How to use Green Stuff Modelling Putty | Kneadatite Increasing the amount of blue hardener in the ratio will lead to a harder, faster-curing putty. It will be a darker green in colour and less sticky. …
- Most searched keywords: Whether you are looking for How to use Green Stuff Modelling Putty | Kneadatite Increasing the amount of blue hardener in the ratio will lead to a harder, faster-curing putty. It will be a darker green in colour and less sticky. Green Stuff modelling putty is straightforward to use – here are some recommendations from leading model makers as to how to work with the putty
- Table of Contents:
See more articles in the same category here: https://chewathai27.com/toplist.
Can you sand green stuff once itâs dried?
Desert Cat 1st Lieutenant Join Date: Mar 2010 Location: The Midlands of South Carolina Posts: 596
Quote: Vegas Originally Posted by That’s right desert cat, that other stuff is not good for sculpting. But green stuff is. It cures in , hmm, hours. It slowly gets harder so you can work with it for a long time. It also doesn’t really shrink as it dries. It holds intricate detail extremely well. It sticks to plastic really well – good for modding existing pieces. It sands like hard plastic. It paints like plastic.
Green stuff is good stuff. I have only used greenstuff by GamesWorkshop. But there are others, graystuff (?). But know little about them except that they have different hardness, curetime, etc – might be better some some apps. Quote: Asphalt Originally Posted by Green Stuff is one of the sculpting compounds made by Kneadatite. I have used brown and green and like em both. And it can indeed be sanded once cured.
Thanks guys. The stuff I use doesn’t shrink and dries white, but very limited working time. The stuff I use sands great and is perfect for painting. Plus it also works to help hold stuff together. It is designed to patch holes in boats. You can even use it under water and it still cures in minutes. I will have to check Hobby-town USA and Hobby Lobby to see if I can find some “Green Stuff”.
By the way, how much does it usually cost and how is it packaged? Thanks guys. The stuff I use doesn’t shrink and dries white, but very limited working time. The stuff I use sands great and is perfect for painting. Plus it also works to help hold stuff together. It is designed to patch holes in boats. You can even use it under water and it still cures in minutes. I will have to check Hobby-town USA and Hobby Lobby to see if I can find some “Green Stuff”.By the way, how much does it usually cost and how is it packaged?
” Any body listening to this backwards for a secret occult message is a real Dweeb ” – Anciant Destro Chant
B/S/T
http://www.hisstank.com/forum/g-i-joe-buy-sell-trade/80386-desert-cats-trade-sell-list-2010-a.html
Feedback
http://www.hisstank.com/forum/g-i-joe-buy-sell-trade/80393-desert-cats-feedback.html __________________
How can I make GreenStuff harden faster?
Author Message
Advert
Forum adverts like this one are shown to any user who is not logged in. Join us by filling out a tiny 3 field form and you will get your own, free, dakka user account which gives a good range of benefits to you: No adverts like this in the forums anymore.
Times and dates in your local timezone.
Full tracking of what you have read so you can skip to your first unread post, easily see what has changed since you last logged in, and easily see what is new at a glance.
Email notifications for threads you want to watch closely.
Being a part of the oldest wargaming community on the net. If you are already a member then feel free to login now.
Subject: How can I make GreenStuff harden faster?
Robed_Chaplain
Giggling Nurgling
California
can I make my greenstuff harden faster so that I don’t spend all day waiting to finish his armor before I move on to sculpting his robe?! Hi, I’m currently working on a very large sculpting project: I’m sculpting Pirimarch Mortarion, of the Death Guard. I’m challenging myself to make 90% percent of him out of greenstuff. I’ve encountered a problem though: as many of you know, greenstuff takes FOREVER to cure to a point where you can carve on it. I’m using the Scibor molding technique to make most of his armor plates, and on his shoulder pads I’m molding them, letting them dry, cutting off excess greenstuff around the edges of the armor trim, and then finally attaching them to the model; but to do this process I need my greenstuff to be hard enough to carve without deforming detail. So basically what I’m asking in this thread is how thecan I make my greenstuff harden faster so that I don’t spend all day waiting to finish his armor before I move on to sculpting his robe?!
“In the embrace of great Nurgle, I am no longer afraid, for with his pestilential favour I have become that which I once most feared: Death.”
around 2000pts
around 1300pts “In the embrace of great Nurgle, I am no longer afraid, for with his pestilential favour I have become that which I once most feared: Death.”around 2000ptsaround 1300pts
Subject: How can I make GreenStuff harden faster?
RatherFatRat
Brandon MB
Brandon MB Poxed Plague Monk
Find some suggestive female figurines in greenstuff and present.
… Nah
I’ve found putting greenstuff beneath a hot light cures it really fast. Not sure of any other alternative though.
!
Check out my artz :
http://www.dakkadakka.com/dakkaforum/posts/list/274459.page
—
Looking for DnD, Warhammer or whatever character art or portraits? I’m open for commissions!
2win-1tie-1loss Check out my artz :http://www.dakkadakka.com/dakkaforum/posts/list/274459.page—Looking for DnD, Warhammer or whatever character art or portraits? I’m open for commissions!2win-1tie-1loss
Subject: Re:How can I make GreenStuff harden faster?
Robed_Chaplain
Giggling Nurgling
California
40k friends that one ! And are you sure that putting it next to a light won’t melt it or cause it to bubble? RatherFatRat@ Thanks for the joke, I gotta tell myfriends that one! And are you sure that putting it next to a light won’t melt it or cause it to bubble?
“In the embrace of great Nurgle, I am no longer afraid, for with his pestilential favour I have become that which I once most feared: Death.”
around 2000pts
around 1300pts “In the embrace of great Nurgle, I am no longer afraid, for with his pestilential favour I have become that which I once most feared: Death.”around 2000ptsaround 1300pts
Subject: How can I make GreenStuff harden faster?
Sgt Deadmeat
Gone
Gone Guard Heavy Weapon Crewman
If my googling is up to scratch, using more blue than yellow will give a faster but harder curing mix.
My GS is so old the join has cured in quite a thick band so when i cut bits off I rarely get 50/50. I will have to try using more blue as it will make life easier for quick jobs.
Subject: Re:How can I make GreenStuff harden faster?
usernamesareannoying
Evasive Eshin Assassin
like the other person mentioned, you want to heat it.
ive seen some cool little ovens made from soda cans exactly for what you want to do.
if you havent you may want to try and google this topic but heat is the way to go.
Subject: How can I make GreenStuff harden faster?
Bonegrinder
Sure Space Wolves Land Raider Pilot
If you have a desk lamp you could bend the neck so it’s a few centimeters from the lightblub to the models this will harden greenstuff in no time at all.
Subject: Re:How can I make GreenStuff harden faster?
Grabzak Dirtyfighter
Lead-Footed Trukkboy Driver
Youngwood, PA
That’s exactly what I do with my desk lamp.
Subject: Re:How can I make GreenStuff harden faster?
The Power Cosmic
Some backwater sump
Some backwater sump Veteran Inquisitorial Tyranid Xenokiller
As you may know, green stuff hardening is a chemical reaction, so really the only way to speed it up is to get the molecules moving and interacting faster. So, basically, heating. And yes, more blue will make it cure faster too, but will be more brittle. Though if you’re not bending the stuff, it shouldn’t matter.
New Career Time?
Subject: How can I make GreenStuff harden faster?
Green Stuff: Increase Curing Speed
3.5 – How do I get Kneadatite\\epoxy putty to cure faster/slower?Two-part epoxy putties harden by a chemical reaction of the two components. This means that they do not need heat,like some other sculpting materials containing solvents that have to be evaporated. Still, heat can help to make curingaccelerate. This is already the case with normal curing. The chemical reaction will generate heat, which has the sideeffect that thicker areas will cure before thinner areas. There is more material in the thicker areas, which will generatemore heat that will, in turn, speed up the curing reaction.There are a number of ways of applying heat externally. The most common is by using a lamp. Either place the miniclose to a lamp bulb or make a \”putty oven\” using something like a metal coffeecan with both sides open and the bulbsticking through the top. Bulbs from 15-40 Watts have been suggested. Bob Lippman measured the temperature in his\”oven\” and it was about 105-110 degrees F (40-44 degrees C). Jason Wiebe also noted that it\’s possible to use a toasteroven, as is sometimes used for polymer clays. And hot water for a final suspended dip.The putty will first become soft when heated; and will start hardening after that. Don\’t touch the sculpt in that periodand make sure it is not resting on an area of uncured putty! It is also possible to make use of this property, as the putty isa bit stickier when hot. So for better adherence, you can lightly warm the putty before applying it. Just don’t heat it toolong, as that will harden it again. Overheating can cause problems (like creating a spongelike (weaker) structure in thefigure) and care has to be taken to avoid this.Some details by Bob Finkenauer:* Kneadatite has about a 90-minute work-life when tested at 75 degrees F (24 degrees C). As a rule of thumb,every 20-degree F increase in temperature cuts the work life in half — and every 20-degree F reduction intemperature doubles the work life (place some mixed Kneadatite in the freezer and it will freeze, but not cure -warm it up and it will start to cure again. See 3.4.* The 15-watt bulb idea is a good one. Have you ever measured the temperature inside the can? I\’d recommendkeeping the temperature under 120 degrees F (49 degrees C) while curing.* Other variables are the mass and shape of the mixed Kneadatite. A 5-gram piece of mixed epoxy in a thin stripwill cure more slowly than a 100-gram ball of Kneadatite, provided that all other conditions remain constant.* If you want to get the Brown/Aluminum to cure harder, one idea you might want to try is warming the mixedputty to about 95 degrees F for a few minutes after it is cured. The cured putty will actually soften a bit while itis being warmed, but after the heat is removed and the cured putty is allowed to return to room temperature, itmay actually be harder than it was before the warming process. The heat should actually force the molecules ofpart A and B to react to a greater extent and thus increase the hardness.
So you have finished reading the how to dry green stuff faster topic article, if you find this article useful, please share it. Thank you very much. See more: green stuff hair dryer, curing green stuff, how to use green stuff, green stuff not hardening, liquid green stuff, when can you paint green stuff, milliput cure time, milliput vs green stuff
