Fly Screen Door Hinges? Trust The Answer

Do I have to be a DIYer to install these fly screens?

DIY fly screens are designed to be easy to measure and adjust. Simply follow our simple six step guide to get your screen dimensions and we will send you a finished screen. Once it arrives, all you have to do is click the four sides together and glue the fly screen to your existing window or door frame.

Can it be used outdoors?

Homemade fly screens can be fitted inside or outside depending on whether your window/door opens inwards or outwards. If your window/door opens outwards, the fly screen must be installed on the inside. If your window/door opens inwards, the fly screen must be installed on the outside.

Will the frame weather?

DIY fly screens are made from durable plastic that can withstand harsh weather conditions to ensure your fly screens look their best all year round.

Will the mesh weather?

Unlike a folding screen, DIY retractable screens retract into their housing when not in use, protecting the screen from weather damage.

What if I have less than 10mm frame to glue my fly screen to?

Please email our parent company, Phantom Screens. They will be happy to advise you on possible solutions or alternative products.

What if I have enough frames to stick my fly screen on but something is in the way?

If there is an object such as an air vent or baseboard that is preventing you from gluing the screen to the frame, you have two options. The first is to remove the object (e.g. cut back the skirting board to make room). Alternatively, if you have 10mm or more frames on the inside of the obstacle, you can glue the fly screen on top. This means the screen will overlap the opening a bit, but the screen will still work as it should.

What if my window/door is not symmetrical?

Please email our parent company, Phantom Screens. They can advise you on possible solutions or alternative products.

Can fly screens be used with sash displays or protruding window handles?

If the sash stay or the window handle protrudes further than the frame when the window is open, difficulties may arise when installing our do-it-yourself products. Please email our parent company, Phantom Screens. They can advise you on possible solutions or alternative products.

Are the fly screens effective against larger animals (e.g. pets, foxes)?

DIY fly screens work as a great deterrent for larger animals like cats and foxes. However, this is primarily an insect repellent product and as such we cannot guarantee its effectiveness against larger animals.

Are there other fabrics?

Currently, DIY fly screens are only available with our standard fly screen. If you’re looking for a more specific fabric, why not visit our sister site Phantom Screens.

Are there any other colors?

DIY fly screens are currently only available in white to match most PVC windows, doors and conservatories. However, if you require a bespoke colour, our sister company Phantom Screens offer a color match service for professionally installed fly screens.

Can a fly screen be used to cover more than one window?

Yes. Simply measure to the point where you want the edges of the screen to begin and the screen can be fitted over two windows at the same time.

Is there a discount for multiple screens?

Yes. We offer big discounts for customers who buy multiple screens. Visit our screen packs page for more information.

4 minutes | 09.10.2019

Now that we know what these terms are, let’s look at how to use them when choosing the right hinge size for your application.

First, let’s look at the anatomy of a hinge, which all styles share to some extent. This is important to understand when calculating the size of the hinge you need.

Proper sizing of the hinge is critical. For example, undersized concealed hinges can cause premature door failure and create safety issues.

How to size your hinges: hinge size calculator

As previously mentioned, the two hinge dimensions we are concerned with are the sash or hinge height and the overall hinge width (measured with the hinge in the fully open position).

The required hinge height is determined by the door thickness and the door width. The width of the door is important as it affects the weight of the door. A wider door requires more structural support for stability.

For example, if the door is 1-3/8 inches thick and the width is no more than 32 inches, the hinge height is 3-1/2 inches. However, if the door is between 32″ and 36″ tall, the leaf height of the hinges must be increased to 4″ to accommodate the increased weight.

Here’s a simple chart to determine leaf height:

Door Thickness Door Width Approximate Hinge Height 1-3/8″ Up to 32″ 3-1/2″ 1-3/8″ 32″-36″ 4″ 1-3/4″ Up to 36″ 4-1/2″ 1 -3/4″ 36″-48″ 5″ 1-3/4″ Over 48″ 6″ 2″, 2-2/4″, 2-1/2″ Up to 42″ 5″ (commercially required) 2 “, 2-1/4″, 2-1/2″ About 43″ 6″ (commercial duty)

The next step is to determine the total bandwidth, noting that this is measured with the band fully open, also known as the full wingspan.

The minimum width can be determined by a simple calculation using three dimensions:

thickness of the door

backset

release required

To determine the backset, here is a general rule of thumb: For door thicknesses from 1-3/8″ to 2-1/4″, the standard backset is ¼”. For door thicknesses of 2-1/2″, the standard backset is 3/8″.

Determine how much clearance you need to prevent the door from touching the cabinet or panel.

Then calculate the bandwidth using this formula: (door thickness – backset) x 2 + clearance required = total bandwidth

If your calculation result is not a standard hinge size, go to the next larger size.

You can use this next table to determine the hinge width as well. Just check it with your individual application for correctness.

Hinges are important but often overlooked items in your daily life. You encounter them when you come home, when you move around the house, when you drive your car, and even when you prepare meals in the kitchen. For such small objects, they are of enormous importance. If you’re replacing old hinges or building something new that requires a hinge, consider placement, use, and style to ensure you get a hinge that works for you. Hinges come in many varieties, including strap, piston, pivot, butterfly, and spring.

1 Use wooden blocks to stabilize the door. Move the door so that the entire hinge is exposed and place blocks under the door to stabilize it. If you are replacing a door hinge, do not remove the door. Placing blocks underneath will help support the door and prevent it from falling over.

Compare 2 hinges and measure the door. Make sure your new hinges match the old hinges in size and edge shape. Also, use a tape measure to verify that the current hinges are in the correct locations. The hinges should be placed so that one is 7 inches from the top of the door frame and the other 11 inches from the bottom of the door frame. If these are incorrect you will need to follow the above steps of cutting the groove and preparing the door jamb for the new hinge.

3 Remove one of the old hinges. Starting at the top hinge, remove the screws that secure the hinge leaves. Carefully pull them away from the door and jamb and check that the wood under the hinges is in good condition. You may want to plug some of the old holes with a small wooden wedge, especially if some of the holes have been ripped out.

4 Prepare the jamb and door for the new hinge. If the old door hinge has been in place for some time, you may need to do some repair work on the jamb and door. If necessary, sand the wood and apply a new coat of paint or stain to match the existing wood. If the replacement hinges are a different size than the old ones, use wood putty to fill in the mortise holes in both the door and door frame. Use a metal scraper to fill the screw holes or plug them with a small wooden wedge.

Allow the putty to dry and sand it smooth and flush with the surface.

Paint or stain the repair to match the rest of the door and trim. If the old door hinge has been in place for some time, you may need to do some repair work on the jamb and door. If necessary, sand the wood and apply a new coat of paint or stain to match the existing wood.

5 Install the new hinge. Place your new hinge over the position of the old one. Use a drill or screwdriver and the package screws to attach the two sides of the hinge to the jamb and door. Place the hinge pin in the hinge to secure the new hinge.

6 Repeat the process for the second hinge. Go to the nearest hinge and use a drill or screwdriver to remove it. Replace it with the new hinge and screws and hold it in place to make sure the hinge doesn’t wiggle out of place. Insert the new hinge pin when the new hinges are attached. If you have a third center hinge, you should replace it at this point as well. Go to the nearest hinge and use a drill or screwdriver to remove it. Replace it with the new hinge and screws and hold it in place to make sure the hinge doesn’t wiggle out of place. Insert the new hinge pin when the new hinges are attached.

7 Test the new hinges. Remove the blocks under the door and try to open and close it several times. If the door opens smoothly, your job is done!

advertisement