String Of Pearls Vancouver? The 80 Top Answers

Succulent Box Senecio Rowleyanus Variegata ‘Variegated String Of Pearls’ Senecio Rowleyanus Variegata is a trailing beauty that is rare and sought after. This is a succulent strain like no other with its long and slender green stems topped by a cascade of green and white pearly leaves. It is often referred to as a colorful “pearl necklace” or even “pearl necklace”.

Quick Guide Location Part sun, part shade Watering Thoroughly but infrequently Size 2″ tall, 60″ long Trailing succulent Climate Not hardy, Zone 10 (28°F / -2°C) Propagation Seeds or cuttings Seasonality Evergreen, summer Dormant toxicity Toxic to humans and animals when eating. Flowers Cream colored flowers scented with cinnamon

With proper care, this hanging succulent grows quickly. It makes a great houseplant and is a real eye-catcher with the interest and texture of the downwardly drooping leaves. Just make sure you place it on a high shelf so the stems can hang down. Planted in pots and containers, she will add a wonderful accent to an outdoor arrangement or display.

In warmer climates, it can even be planted in the ground and does well when snaking among other plants to fill in gaps, but remember that “pearl necklace” succulents are poisonous to humans and animals if eaten will.

Colorful pearl necklace care

position

When grown indoors, ‘Variegated String of Pearls’ does well in a bright room with plenty of natural light. Position in a sunny spot for outdoor cultivation, but move to partial shade when it’s really hot. They can tolerate temperatures as low as -2°C for short periods, but only if the soil is dry. When the weather gets cooler, it’s best to bring them indoors.

Spread

A colorful ‘String of Peals’ plant can grow up to 10 cm high and 90 cm long. Make sure you leave plenty of room at the bottom for the trailing stems.

irrigation

As with most succulents, Senecio Rowleyanus Variegata is at risk of overwatering, and you’ll know if this is happening because the “pearls” of the leaves will swell and even burst. As with most succulents, planting in well-drained soil helps to keep the roots dry to prevent this.

The key is to water them well when needed and then also subject them to a dry spell to allow the roots to grow and get the oxygen they need to thrive and the best way to ensure this is to use the ‘soak and dry’ watering method . .

The soak and dry method simply means waiting until the soil is almost completely dry before thoroughly soaking the plant. One top tip: be bold and prepared to hold your nerve when it comes to holding off to water, and when in doubt, err on the side of caution rather than full throttle with the watering can.

To test the dryness of the soil, press your finger at least half an inch into the soil or poke the soil around the drainage holes in the bottom of the pot. When the soil feels dry, it’s time to water your plant.

Most succulent growers prefer to use a long-stemmed succulent, or bonsai watering can soak the soil around the “pearl necklace” plant. A watering can allows you to reach trailing succulents instead of removing them from their hanging position to water them and wait for them to drain.

When watering, remember that ‘String of Pearls’ is in summer dormancy. This means you may need to reduce the amount and frequency of watering during the summer months while your plant is dormant. Your plants will also grow during the dormant period, but they tend to grow much more slowly and therefore require less water than during the main growing season.

Another word of caution about watering: don’t be tempted to use a spray bottle or atomizer when watering your succulents. First, the roots of the succulent are not receiving the required amount of water they need to hydrate. Second, any water that settles and remains on the leaves can lead to leaf blight, disease, or potential pests.

floor

The roots of your Senecio Rowleyanus Variegata need to be free of excess moisture to receive the oxygen they need for healthy growth and to prevent root rot and disease. To achieve this, use a well-drained soil consisting of either peat-free soil or coco coir, then mixed in with minerals like gravel, sand, or perlite. Planting in the right type of soil promotes healthy growth and helps prevent root rot and disease.

It’s easy to make your own well-drained soil. Simply mix in two-thirds minerals, such as gravel, sand, and perlite, and one-third organic matter, such as good quality peat-free compost or coir.

You can of course buy a ready mixed version and there is plenty of good cactus and succulent soil you can buy online or from any reputable garden supply store.

Flower

In summer, expect cream-colored blooms that look almost brush-like with long red stamens. They are lightly scented with the scent of cinnamon and stand proud on the ‘String of Pearls’ stalks on the stems. Flowering lasts about 1 month, but remove any yellow, brown, or dead flowers immediately.

In order to get your “pearl spring” to bloom, you should take appropriate measures in late autumn and winter by lowering the temperature to a maximum of 20 °C | 16°C and allow the soil to dry completely before watering sparingly.

feeding

To encourage a good, strong root system and healthy growth, use a ready-mixed succulent or cactus fertilizer every 2-4 weeks during spring and summer. There is no need to fertilize over the winter.

clipping

Prune only as needed to remove yellowed, damaged, or dead vines. Always use sharp and sterile scissors or a knife.

repot

‘String of Pearls’ will be quite happy not to be repotted too often. In fact, succulents generally do well when their roots are slightly restricted.

If your plant outgrows its container, it is best to repot it in spring or early summer. Choose a sufficiently large succulent pot and very carefully transplant it with fresh soil. To avoid root rot, make sure the crown of the plant is no more than 1 inch (2.5 cm) below the soil.

When repotting, always check the condition of the roots for signs of rot. If you notice wet and slimy, dark brown or black areas on the roots, carefully trim them off with a sharp, sterile knife or scissors. Allow the cuttings to dry before repotting.

How to multiply colorful pearl necklaces

‘String of Pearls’ can be propagated from seeds and cuttings at a propagation station or by rooting in the ground. Below is a step-by-step guide to propagation from cuttings.

stem cuttings

Always use a sharp, sterile knife or scissors for cutting and follow these

Cut a stalk as neatly as possible and at least 4″ long.

Place some paper towels in a container or tray and place the cut on top. There is no need to plant the cutting in the ground at this point.

Keep the cutting dry for the next 5 days or so to allow it to form a protective barrier or become “calloused.”

Once the callus has developed, you can place the cutting on a thin layer of succulent or cactus soil and wait for the roots to start growing. This will take a few weeks. Only water the soil when it is completely dry.

When roots appear, plant them in a pot or container of succulent or cactus soil. It’s best to mound the soil around the newly rooted cutting so that it stands slightly above the pot. Press down to fix and cover with a layer of sand. Do not water at this time.

The next day, water very lightly and press the soil down again. Place in full sun mornings and afternoons and move to a shady spot during the hottest part of the day.

Common problems with Variegated String Of Pearls

root rot

Many succulents, including the variegated ‘String of Peals’, can be prone to root rot. This happens when the roots are left in wet soil for too long. To mitigate the likely root rot, make sure you are using well-draining soil and prevent overwatering by only watering your plants when the soil is almost completely dry.

An early indicator of root rot is yellowed or rotting leaves and stunted growth. If you notice any of these signs, act immediately!

You can do this by carefully removing your plant from its pot. Gently brush off any soil left on the roots and check the condition of the roots. Healthy roots are white or off-white and firm to the touch. Using sharp, sterile scissors or a knife, trim off any roots that are brown or black, soft, and even mushy.

It’s a good idea to let the cutting dry briefly after removing the root rot. Once the ends are dry, repot with fresh soil and a clean pot. Monitor your watering schedule to make sure you’re watering thoroughly but less frequently.

Mealybug

Mealybugs are wingless insects that love warm and humid environments. They feed on the sap of succulents (and other plants) and can be found in plant crevices, particularly around leaf nodes and stem junctions.

There are a number of things you can do to rid your succulent of mealybugs. Begin by cutting out areas of the stems and leaves that mealybugs have ingested. If trimming can be avoided, you can dab the mealybugs with a cotton swab soaked in rubbing alcohol (such as surgical spirit).

You can then use store-bought bug spray, household cleaners, or even soapy water to hose off the rest. You must repeat this process periodically until all signs of the infestation are gone.

You should also use a neem oil solution every 10-14 days to spray over the leaves regularly. Neem oil is non-toxic and helps prevent future mealybug infestations.

aphids

These slow-moving, troublesome little insects are usually green, white, or black and reproduce in large numbers, especially near new growth. They feed on the sap of plants and live in much the same places as mealybugs in the cracks and crevices of stem junctions and leaf nodes.

Similar to mealybugs, they can be successfully treated by blotting large groups of the pests with a cotton bug dipped in rubbing alcohol and then spraying periodically with detergent or household horticultural bug spray and using a cotton swab.

Other trailing succulents

A pearl’s value can vary widely depending on many factors such as pearl type, size, color, finish quality and more. A wild pearl is worth more than a cultured pearl. So how much are pearls worth? Long story short, the average pearl is between $300 and $1500.

How much are pearls worth? Natural Pearls VS Cultured Pearls

Black lipped oyster shell with black pearl. studio shot isolated on white background.photo by rafael ben-ari /chameleons eye

The value of a genuine pearl is determined based on a number of factors. The decisive factor is whether it is a natural pearl or a cultured pearl:

Natural Pearls – Gemstones found in the sea. Oyster divers go to the sea surface to find the natural gems.

– Gems found in the sea. Oyster divers go to the sea surface to find the natural gems. Cultured Pearls – Made using a pearl culture technique. They are still 100% real pearls but less rare than their natural counterparts.

After many, many years of pearl diving, divers have made natural pearls so rare; some say they are on the verge of extinction. Therefore, nowadays they are difficult to find on the sea surface. Due to this rarity, natural pearls are usually significantly more expensive than cultured pearls.

How to determine the value of pearls? There are 6 important factors that determine the overall value of a natural or cultured pearl: shape, size, colour, surface, nacre quality and luster. Which colored pearl is the most valuable? The most valuable and expensive pearls on the market today are the South Sea pearls, which naturally occur in shades of white and gold. How much does a pearl necklace cost? A classic strand of white pearls can range from $100 (mainly freshwater pearls) to over $10,000 (Akoya and South Sea pearls). Both the shape and size of the pearls are very important to the price of a necklace, which is why a very large South Sea pearl necklace could be worth over $100,000.

Other factors that determine the value of pearls

For both cultured pearls and natural pearls, there are other factors that determine the value of a gemstone. To figure out how much pearls are worth, jewelers use various combinations of these factors:

Pearl Type – South Sea pearls are the most valuable

– South Sea pearls are the most valuable pearl size – Larger pearls are more valuable than smaller ones

– Larger pearls are more valuable than smaller pearl color – These gems come in different colors

– These gems come in different colors. Pearl Shape – The rounder the pearl, the more valuable it is

– The rounder the pearl, the more valuable it is. Pearlescent – It must have a lustrous sheen to have value

– It must have a lustrous luster to have value. Surface Quality of the Pearl – The more surface defects a pearl has, the lower its value

So how much are pearls worth? Well, no single factor can determine that. It takes a combination of several factors to determine the value of a pearl.

JEWELRY FOCUS: Hanadama pearls are among the most lustrous marine jewels in the world. Ideal for special occasions or as an anniversary gift, these absolutely radiant pearls command the look of glamorous yet sophisticated elegance.

How much are pearls worth? Value by Types of Pearls

Value of South Sea Pearls

South Sea pearls are considered the most valuable. They are also the largest pearl variety on the market. A strand of South Sea pearls can cost anywhere from $1,000 to over $100,000. Cultured White South Sea Pearls AND Gold South Sea Pearls are the largest gemstones on the cultured market, making them both rare and highly valuable.

Value of Tahitian Pearl

Tahitian pearls are exotic, with dark colors. Depending on size and quality, a strand of Tahitian pearls can range in price from $500 to over $25,000. These gorgeous beauties come in a variety of qualities and pearl sizes, as well as some of the most beautiful pearl colors.

Akoya pearl value

Akoya pearls are the classic round white pearls. They were the very first cultured pearls and are a bit smaller. A strand of Akoya pearls can range in price from $300 to more than $10,000. In general, these are the smallest types of cultured pearls on the market. They were the very first to be grown on a pearl farm.

freshwater pearl value

Freshwater pearls come in a huge range of shapes, sizes and colors. Round freshwater pearls look almost identical to Akoya pearls but are less expensive, ranging from $50 to $2,000 per strand. They are versatile gemstones that are cultivated in fresh water as opposed to sea or salt water.

While some types of pearls are certainly more valuable than others, the value of pearl jewelry also depends on the type of pearl jewelry. Pearl earrings usually only have two pearls and are therefore less expensive. Pearl necklaces, on the other hand, feature many more pearls, but the number of pearls can vary depending on the length of the necklace. For example, if your heart truly desires premium Handama beads but your budget doesn’t allow for long rope, consider other Handama pieces like earrings, chokers, and bracelets that use fewer beads and are still extremely dazzling.

Pearls tend to hold their value fairly well. The highest quality pearls are quite durable, which is why vintage pearl jewelry is still worth a lot of money today. Investing in pearl jewelry allows you to pass it on to future generations in your family and it can be a beautiful and valuable heirloom.

The Pearl Source set of gray pearl necklace and ring

While pearl prices can sometimes seem overwhelming, you don’t have to spend tens of thousands of dollars to have a piece that you will cherish for decades. The Pearl Source offers pearls at many different price points. Shorter strands of pearls cost less than longer strands – even with the same quality.

This means that even if a beaded rope is way out of your budget, you may be able to afford a beautiful, high-quality beaded choker. You will find that your pearls are a great investment, no matter how much you spend on them.

The Value of Pearls: Are Pearls a Smart Investment?

With proper care, pearls retain their value for a lifetime. The higher the quality, the more durable the gemstone. This means when you buy pearls you are investing in jewelry that can become family heirlooms that you can pass on to younger generations.

Start with simple pieces and then work your way up to more expensive pearl jewelry, like pearl statement pieces, pearl cocktail rings, and bold pearl necklaces. It’s a lifetime investment you won’t regret.

JEWELRY GUIDE:

FRESHWATER PEARLS

Freshwater pearls are characterized by exceptional quality at consumer-friendly prices. Whether you’re looking for an elegant piece of jewelry to wear every day around town OR need something for a special occasion where you want to look good, freshwater pearl jewelry is a great choice that won’t burn a deep hole in your wallet.

Common Name String of pearls, string of pearls, string of peas, rosary vine Botanical name Curio rowleyanus (formerly Senecio rowleyanus) Family Asteraceae Plant type Succulent Plant Adult Size 1-2 feet tall, 1-2 feet long Sun Exposure Full, partial Soil Type Sandy, well-drained soil pH Neutral to Acid Bloom Summer Flower Color White Hardiness Zones 9-12 (USDA) Native Range Africa Toxicity Toxic to humans, toxic to pets

Care of the pearl necklace

The string of pearls plant is not particular about its conditions. Given enough light and fertilizer, she will grow quite vigorously in one season. A single plant will survive about five years with proper care, but propagating new plants from cuttings can effectively keep them alive indefinitely.

To help this plant shine, consider growing strings of pearls with multiple stems in a hanging basket. Its branches can also be intertwined, and you can also grow it in a tray, allowing it to form a soil mat just like in the wild. Pearl necklaces don’t have any significant disease problems and don’t require much maintenance. However, it needs a lot of light all year round.

The Spruce / Kara Riley

The Spruce / Kara Riley

The Spruce / Kara Riley

light

Pearl necklace plants thrive in a combination of direct and indirect sunlight for a total of between six and eight hours a day. They do best when placed in direct sunlight in the milder morning hours, and then moved to a spot that receives diffused, indirect light or partial shade in the harsher afternoon hours.

floor

Any regular succulent soil is acceptable for your string of pearl plants, but sandy soil is best. A good choice for this plant is a cactus soil. Alternatively, you can use a 3 to 1 mix of potting soil and sharp sand. These plants are prone to root rot, so make sure their soil is well-drained. Plant them in a container that has ample drainage holes in the bottom. Terra-cotta or clay pots can also help wick excess moisture from the soil.

water

Keep the plant’s soil slightly moist during the spring and summer growing season, and then reduce the amount of water during the winter months. If you notice the succulent’s spherical leaves flattening out, it’s a good indicator that the plant needs more watering. You will likely need to water your plant once every 7 to 14 days. Plants in hotter climates, outdoors in summer, or in porous terracotta pots may need water about every seven days, depending on rainfall frequency and temperatures. If the soil feels dry except for the first 1/2 inch of soil, that’s a good sign your plant is thirsty.

water thoroughly; You’re done watering when the water runs out of the bottom of the pot. Succulents need good drainage and be careful not to overwater your string of pearl plants. Succulents are drought tolerant but cannot survive with wet, damp roots.

temperature and humidity

Pearl necklace plants thrive in warm temperatures above 70 degrees Fahrenheit from spring through fall and grow best in winter temperatures of 50 to 60 degrees Fahrenheit. This plant prefers low humidity, so avoid placing it in already humid areas of your home, like a kitchen or bathroom.

fertilizer

Fertilize your pearl necklace plants every two weeks during the growing season with a balanced liquid or water-soluble fertilizer, diluted to about half the strength. Only fertilize the plant every six weeks during the winter dormancy.

Types of Pearl Necklace Plants

Strings of pearls have closely related plants with differently shaped leaves that look more like bananas, teardrops, or striped watermelons. These close cousins ​​in the same family of daisies are:

‘Curio radicans’: Fuller and not as drooping as a string of pearls, this variety has tendrils with banana-shaped leaves; commonly referred to as banana chain or fishhook chain

Fuller and not as droopy as a string of pearls, this strain has tendrils with banana-shaped leaves; commonly referred to as banana or fishhook string ‘Curio herreanus’: Commonly referred to as watermelon or string of pearls, this hanging plant has tiny melon-shaped leaves with purple stripes.

Commonly referred to as a watermelon necklace or string of pearls, this hanging plant has tiny melon-shaped leaves with purple stripes. ‘Curio citriformus’: This cultivar has both erect and trailing stems filled with thick, teardrop-shaped leaves and small white flowers that bloom between late summer and winter.

The Spruce / Kara Riley

clipping

Using sterilized scissors or pruners, trim off dead stems and pearls, as well as any stems that have lost a lot of leaves. If your plant becomes leggy or too long, you can trim these branches and propagate new plants from the cuttings. Pruning encourages fuller, bushier plants.

Multiplication of pearl necklace

Pearl necklace plants are easily propagated from cuttings. To keep your plant alive for years, you should take cuttings and grow new plants. Spring, summer, or early fall (in warmer climates) are good times to propagate pearl necklace plants. It can take three to four weeks for the plant to take root. You can also plant seeds, although this is often less successful. How to grow plants from cuttings:

To propagate the string of pearls, you will need sterilized pruning shears or shears, a 4- or 6-inch pot, and cactus or succulent soil. Cut several 4- or 5-inch stems just below a leaf node. Remove the last two leaves. Lay out the stems about a day or two before planting. The cut ends and areas where the leaves have been removed must become calloused and dry. Fill a pot with soil. Make a hole in the center where you will plant the stems. Place the cut ends in the hole that is at least an inch deep. All leaves should be above the ground. Pack the dirt around the stems. Wait a few days before watering thoroughly. If it’s indoors, put it in a bright place. Outdoors, the plant does better in partial sun. Water the soil when it dries up.

How to grow a pearl necklace from seeds

One of the reasons it is difficult to grow strings of pearls from seeds is that the flower heads need to be pollinated to produce seeds that will germinate. A big unknown is whether the seeds are viable, which you won’t know until you plant them.

Plant the seeds in a fast-draining succulent or cactus potting mix. Make sure the soil never dries out. If you don’t think you can maintain soil moisture, place a clear plastic bag around the nursery pot. The seed germination rate can be from a few weeks to two to three months, and in spring or summer, the seeds will germinate faster.

Potting and repotting of the pearl necklace

The ideal time to repot your string of pearl plants is early spring. Use a fast-draining succulent or cactus soil mix. Get a well-drained pot with ample drainage holes. Terracotta and unglazed ceramic pots are ideal for succulents. The pot should be the next larger size than the pot you currently have, usually 2 to 3 inches larger and deeper. Add the soil to the bottom of the pot, carefully remove the root ball from the old pot and center it on the bed of fresh soil. Fill in the soil around the root ball to within 1 inch (2.5 cm) below the rim of the pot.

You can repot these plants annually, but only a few times before they eventually die. After a few years, propagating a plant from new cuttings is better than trying to keep and replant an older plant.

wintering

If you live in Zone 8 or below, bring your pearl necklace indoors in the winter; it will not survive a freezing cold winter outdoors. If you want your plant to eventually flower, you should give it a cool down period with temperatures just above freezing between 35 and 44 F. Keep the plant in an unheated room that gets at least 6 hours of light to give it the cool time it needs. Water very infrequently – about once a month during the dormant season.

Common Pests

Aphids, mites, whiteflies, mosquitoes, mealybugs, and ants are common bugs that are attracted to strings of pearls. Insects often raid a plant when a plant is unhealthy. Poor drainage, high humidity, overcrowding, and insufficient light can weaken a pearl plant’s defenses. Avoid overwatering, spray the plant with neem oil solution, place the plant in a well-ventilated area, and regularly inspect your plants for pests. Neem oil and insecticidal soap are two biological pest control methods for insects on your plant. Try these methods before going down the synthetic pesticide route.

How to make a string of pearls bloom

Overwintering is essential if you want to see your succulents bloom. Strings of pearls bloom in summer and produce 1/2-inch daisy-like white flowers with long red stamens and bright yellow anthers. The small flowers are not showy but are fragrant with a sweet and spicy cinnamon-like scent. Give the plant a cool down period and keep it relatively dry during the winter months. Once the growing season begins in spring, fertilize twice a week. Although it rarely blooms indoors, it can bloom if fed regularly and given adequate water and light. A bright window sill with several hours of direct sun is sufficient. When it blooms, its bloom lasts a month or so.

Common pearl necklace problems

Pearl necklace plants rarely have problems with pests and diseases, making them great to keep. The biggest problem this plant has is usually related to too much or too little water.

Shrinking Leaves

If your plant’s leaves are wilting or wilting, it can be a sign of underwatering or overwatering. If you’ve been watering frequently and the soil feels damp, you’re watering too much or the plant needs better drainage. Water once every 7 to 14 days; The top inches of soil should feel dry before watering again. When the rounded leaves flatten out, it’s a sign that you should increase the water frequency.

Yellowing or graying leaves

Yellowed or graying leaves are often caused by insect activity. Regularly treating the plant with neem oil should keep bugs at bay.

Mushy stems and leaves turn purple

Overwatering is another reason for mushy stems and leaves; it causes the root to rot, which makes it easy for soil fungi to take root. Root rot can kill the plant. Prevent this condition by watering regularly. To save the plant, you can let the plant dry out and see if it recovers. If the plant is too far away, you can cut off any remaining healthy stems and propagate them in a small pot of clean soil. Discard the infected soil and root. Sterilize the pot before using it again.

The string of pearls plant can be difficult to understand. Some people seem to be able to grow them like grapevines, while others can barely keep them alive. I’ve been on both sides of the equation and can add my two cents in how to keep these plants alive and thriving.

Below is a picture of my pearl necklace collection. But it wasn’t always like that. I started with a pot or two of these plants and had problems with them almost immediately. I couldn’t tell if they needed more or less water and why they shrank and eventually died.

But through it all, I managed to save and keep alive the plants I had, which eventually grew into this little collection of mine. Here’s what I learned after my initial problems with these plants.

Tip #1: No direct sunlight

Pearl necklace needs adequate sunlight to grow and thrive. But how much direct sunlight does it really need? I learned early on that these plants tend to shrivel and wither when exposed to too much sun.

String of Pearls will not do well in direct sunlight. They really don’t do well under intense heat or full sun. These plants are not among the plants that can get used to full sun. Outdoors, they prefer a light location that is protected from direct sunlight. Penumbra is much better. They will shrink and dry out if left unprotected in direct sunlight for too long.

If you leave your string of pearls outside like I did, make sure you give your plant adequate shade. Find a spot where the plant can be protected from direct sunlight, especially the afternoon sun when the sun’s rays are most intense. Mines get plenty of morning sun and some indirect afternoon sun.

I protect them from direct sunlight by hanging them in a shady spot outside or under a taller plant, making sure they aren’t in full sun. Here are some parasol recommendations if you need them for your plants.

Tip #2: Get the right lighting indoors

Because the sun’s rays are naturally less intense indoors than outdoors, you don’t have to worry about String of Pearls getting too much sun indoors. However, you must ensure that they receive adequate lighting indoors.

If kept indoors, String of Pearls needs to be placed in a spot with plenty of light. Find a bright spot in the house with lots of light and sunshine. Let the sun shine or shine on the crown of the plant and not just on the leaves or pearls. If you notice that the plant is getting too much sun, e.g. For example, if it turns yellow and shrivels, you can move the plant a few inches from the window to reduce the intensity of the sun.

Too little sunlight leads to poor growth and fallen leaves. If the plant doesn’t get enough sunlight indoors, move it to a lighter spot or closer to the window. Consider using a grow light if you suspect your plant is not getting enough sunlight indoors. You may need to supplement your plant’s lighting needs with a grow light for a few hours to keep them happy. When using a grow light, keep the light at least 15cm away from the plant to avoid burning the plant. Here are some of my grow light recommendations.

Tip #3: Know your plant’s watering needs

Casting is probably the biggest mystery people have when it comes to pearl necklace care. How do I know when to water my pearl necklace? The easiest way to tell if your plant needs water is by looking at the beads. When water is needed, the pearls begin to shrink and wrinkle, much like raisins. This tells you that the plant is very dry and needs to be watered immediately. However, you don’t have to wait for the pearls to start shrinking before watering.

The key is finding the right balance of when to water and when to hold back watering. String of Pearls doesn’t need frequent watering, but when you do, water thoroughly and give the plant a good drink. Only water again when the soil is dry. From my experience, smaller and younger plants need more watering than larger, mature plants, as mature plants have larger beads and more water holding capacity.

Out of habit, I tend to keep my succulents, including my string of pearls, submerged. I generally don’t water my String of Pearls more than once a week. For reference, I live in Northern California and keep my plants outdoors year-round. It is usually dry here, except for rainy days in the colder months.

irrigation in summer

During the warmest part of the year or during a heat wave, I definitely look after my string of pearls, protect them from the scorching sun and water them at least once a week. Don’t just mist the plant, give it a good drink to make sure it’s fully hydrated. During the warmer months, especially summer, I water at least every 7-10 days.

As the weather gets cooler in the fall and spring I cut down on watering and watering about every two weeks, sometimes less just because I honestly have too many plants and can’t get around to watering them as often as I’d like.

watering in winter

My area gets a lot of rain during the winter months, so I skip watering my plants and rely on rainwater, which succulents love. When we have a dry spell in the winter months, I water about once a month.

The rest of the time I just leave them alone and let them do their own thing. The image below was taken in early spring this year, right after the winter season when I mostly ignored these plants for months, relying only on rainwater. When I looked at them again, they had all grown nicely and survived the winter frost.

watering during propagation

The only time I deal more with these plants is when I propagate them. This can be done with stem cuttings. The only time I spray my string of pearls is during propagation. I spray or spritz them because it seems gentler on the cuttings and doesn’t disturb them while you wait for them to take root.

The cuttings need to be watered or sprayed when the soil feels dry. For me it’s usually once a week, no matter what time of year. I don’t leave the cuttings without water for too long or they will dry up and not survive. I have a number of articles and useful information on the spread of pearl necklaces and have included the links at the end of this article below so please check them out.

Tip #4: Choose the right floor

Using the right type of soil for String of Pearls goes hand-in-hand with proper watering techniques. Knowing when to water and using the right soil is vital to your plant’s survival.

Pearl necklaces love water, but don’t stay in wet soil for too long. Drainage is key for these plants. These plants have thin stems and long, thin roots, so providing a well-drained potting mix is ​​important to prevent root rot. Constantly wet soil promotes root rot and disease.

Potting soil that drains well has usually been modified to make it more porous. You can modify the potting soil yourself by simply combining Pelite with a universal potting soil (2:1 solution of potting soil to perlite). Another way to do this is to combine cactus compost with perlite (2:1 solution of cactus compost to perlite). You can also use a combination of the three materials mentioned: all-purpose soil, cactus mix, and perlite (1:1:1 solution). It doesn’t have to be exact measurements. What you are basically doing is making the soil more porous by combining it with perlite.

If you prefer not to mix materials you can use something like Bonsai Jack which is a pre-mixed cactus/succulent soil that is already very porous. To find these materials online, visit my resource page for soil and soil improvement recommendations.

Tip #5: Find the right pot size

Does it matter what type of pot you put your String of Pearls plant in? I learned this the hard way and so I almost killed my plant early on by putting my plant in the wrong container.

Make sure your pot isn’t too big for your String of Pearl plant. Choose pots that are just the right size for the plant you have, not too wide in diameter and not too deep. Pearl necklace plants have thin stems and even thinner roots. A pot that is too big or too deep gives the plant more room for rot and disease.

keep it simple Make sure the pot is just the right size and depth for your plant and that the plant gets adequate ventilation. Make sure the plant is not planted too deep in the pot, more than 1 inch from the edge of the pot. If the plant is planted too deep in the pot, it will not get enough ventilation, which can encourage fungal growth and rot.

Drainage holes are also a good idea to allow excess water to drain out of the pot. You can drill drainage holes in the bottom of the pot if needed, or find pots with drainage holes.

Tip #6: Repot newly purchased plants

Repotting newly purchased pearl necklaces can often be overlooked. But from my experience, repotting your plant early is very important and can ensure your plant’s survival.

When buying new String of Pearl plants, they often come with unsuitable potting soil, leaving the plant either too wet or too dry. Remove the string of beads from their original soil mix and transplant into a fresh one. If necessary, find a pot that is the right size for the plant, not too deep and preferably with drainage holes.

Tip No. 7: Protect from frost

Another way to kill your string of pearls is to expose them to extreme cold. How low can the temperature drop before you have to protect your plant?

The string of pearls is not a frost tolerant plant at all. It can tolerate temperatures of around 20°F or -6.67°C. With fewer or longer frosts, you will need to bring your plant indoors or protect it from the freezing temperatures.

If you’re having harsh winters, be prepared to let your plants overwinter or protect them from freezing temperatures. Here are some antifreeze recommendations.

My pearl necklace survived the entire winter outdoors here in Northern California this past winter. We get freezing and freezing temperatures here, but that’s nothing compared to other parts of the country where winters can be very harsh. We also get plenty of sunshine during the day to keep the plants warm and happy.

Bonus tip: How to make pearl necklaces fuller

You may see pictures of String of Pearls looking really full and wonder how to make yours look like this. Pearl necklaces tend to get very long and quite heavy. The long trails can weigh down the plant and as a result the top can start to look sparse. How can you make your pearl necklace look fuller?

To make your string of pearls look fuller, cut the plant down and add the cuttings at the top of the plant. The stem cuttings will root in a few weeks and begin to grow like normal plants. You can do this whenever your plant is growing really long. And eventually you will have a fuller and healthier looking string of pearls.

This is the same method I use to propagate strings of pearls by using cuttings. To learn more about how to propagate strings of beads, I have written a great article here: “Three ways to propagate strings of beads and bananas”.

You may also find these other posts I have on String of Pearls helpful:

Why is my pearl necklace dying and how can I save it?

Why is my pearl necklace shrinking?

Cultivation and Propagation of the String of Pearls Plant Senecio Rowleyanus

I hope you found this post that will help you keep your pearl necklace alive and thriving. Thank you for visiting and happy gardening as always!

Pin this to save for later or share now!

The most common reason a pearl necklace plant dies is because it is being watered too often or the soil is retaining too much moisture, causing the pearls to turn brown or yellow and mushy. Strings of pearls require the soil to dry out between waterings to prevent it from dying of root rot.

However, strings of pearls often shrink with a dying appearance due to drought stress, under-watering, not watering often, or because the soil has baked and repels water from the surface, preventing water from getting properly to the roots.

Too much heat, too much sun or too little light can also be the cause of the death of a pearly plant.

To revitalize a string of pearls plant, it is important to mimic the conditions of the plants natural environment with bright, indirect light, soak well and allow the soil to dry before watering again, and plant strings of pearls in succulent and cactus soil that is porous and well-draining, to avoid root rot.

Read on why your heart plant is dying and how to revive it…

String of pearls shrinks and dries up

Symptoms : Pearl necklace leaves look shriveled or dry up.

: Pearl necklace leaves look shriveled or dry up. Causes: Drought stress due to too little, too little or high humidity. Dry potting soil can repel moisture, leading to drought stress. Excessive heat and too much sunlight can also contribute to drying out the leaves.

String of Pearls is a succulent native to southern Africa where it grows in gritty, well-draining soil on rocky slopes in bright, indirect light with infrequent rainfall.

The pearls retain moisture as a strategy to cope with drought. So when they’re under stress and don’t have access to water, the leaves shrink as they use their moisture resources to survive.

If you place your string of pearls in full sun or in the afternoon sun, the intense heat and light can cause the plant to lose too much water through the leaves, which is a common cause of string of pearl plants drying out.

While string of pearls is adapted to drought and doesn’t need to be watered as often as most houseplants, in its natural environment, when it does rain, it takes a deluge rather than a light downpour.

To grow strings of pearls it is important to water the soil with each watering and not just water lightly as this only wets the surface of the soil and the water does not penetrate the potting soil and reach the roots causing the drought that foliage leads to shrinkage.

While strings of pearls will tolerate drought, they will need a good soak every 2 or 3 weeks.

When some potting soils dry out completely, they can repel water, causing it to bead up at the soil’s surface and escape through the drainage hole in the root base, not reaching the roots where it’s needed.

How to revive shriveled pearl necklace plants

Place your pearl necklace plant in a spot with bright, indirect sunlight rather than full sun so it doesn’t have to deal with high temperatures while it’s drought stressed.

Make sure your string of pearls isn’t too close to a heat source like a radiator in the path of an air conditioner, which can dry out the leaves.

Allow the soil to soak liberally so that excess water trickles out of the bottom of the pot. This will ensure that the water has penetrated the soil, allowing the roots to absorb the moisture they need to keep the leaves from drying out.

Typically, a good schedule is to water your string of pearls about every 2 weeks during active growth (spring and summer) and then every 3 or 4 weeks during the winter to achieve the proper moisture balance to keep foliage healthy and roots closed avoid rotting, but that depends on your climate and conditions.

If you find that the soil is not absorbing the water properly, place the pot in a basin of water for 10 minutes to allow the water to properly wet the soil.

To prevent the soil from repelling water and causing drought stress again, remove the string of pearls from the pot and after soaking, fluff the soil in a basin so it can be removed easily without damaging the plant’s roots. Replace the soil with specially formulated succulent and cactus soil that retains an open-pored texture even when dry and effectively mimics soil conditions in the pearl necklace’s natural environment.

Strings of pearls should be soaked well, then the soil should dry out completely before watering again.

The way to determine how often pearl necklace plants need to be watered in your climate and conditions is to water the soil with a good soak and then monitor the soil’s moisture content to see when it dries up.

To do this, feel the potting soil at the bottom of the pot through the drainage hole in the bottom of the pot. If the soil is damp, delay watering until it is slightly dry.

When the soil feels dry, this is the perfect time to water your string of pearls.

With 2 or 3 watering cycles, the pearl necklace leaves should recover from the shriveled and dry appearance.

(For all watering best practices read my article on how to water a string of pearls).

Pearl necklace leaves turn brown or yellow with dying appearance

Symptoms: The leaves of the string of pearls turn brown or yellow with a mushy texture.

: The leaves of the string of pearls turn brown or yellow with a mushy texture. Causes: Stress from watering the plant too often or from soil storing too much moisture.

The string of pearls grows in gravelly soils, often on hills in its native region of southern Africa.

Therefore, she has specially adapted to growing in soils that are very porous and drain very quickly.

Planting the string of pearls in ordinary potting soil can trap moisture around the roots, causing the leaves to turn brown or yellow and feel mushy rather than firm and healthy.

This can also be the case if pearl necklace plants are watered too often.

Pearl necklaces are adapted to survive drought. So if they are watered frequently, they will show signs of stress such as: B. the leaves turn brown or yellow and feel mushy.

This can also cause root rot, which can lead to the death of the plant.

Other causes of soil that is too moist for pearl necklace plants include pots without drainage holes in the bottom and the use of saucers and trays that prevent water from seeping out of the bottom of the pot.

How to revive pearl necklace plants with leaves turning brown or yellow

Reduce watering. Supplementally allow the soil to dry out between waterings to reproduce the moisture cycle to which the string of pearls is adapted in its natural range.

. Supplementally allow the soil to dry out between waterings to reproduce the moisture cycle to which the string of pearls is adapted in its natural range. If the stress from overwatering is low and the leaves are only turning a little brown or yellow, allowing the soil to dry out between waterings can often help the plant recover.

is low and the leaves only turn a little brown or yellow, allowing the soil to dry out between waterings can often allow the plant to recover. When planting string of pearls plant in potting soil that stays moist for a long time, it is important to replace the potting soil with specially formulated succulent and cactus soil that mimics the well-draining, porous soil that string of pearls is adapted to prevent root rot .

for a long time, it is important to replace potting soil with a specially formulated succulent and cactus soil that mimics the well-draining, porous soil that string of pearls is adapted to prevent root rot. Succulent and cactus soil effectively drains the soil after watering, so your string of pearls stays a healthy green and doesn’t suffer from root rot.

after watering to keep your string of pearls a healthy green and not suffer from root rot. Always plant pearl necklace plants in a pot that has drainage holes in the bottom to allow excess water to escape, preventing excess water from pooling around the roots and causing the plant to die.

to escape so excess water doesn’t pool around the roots and kill the plant. Empty any saucers and trays used to prevent water spills as regularly as possible to allow the soil at the bottom of the pot to dry out properly.

String of hearts is also in hibernation, so growth may slow in response to fewer hours of light and reduced intensity of sunlight.

During hibernation, string of pearls has a higher risk of root rot as water requirements are reduced due to lack of growth.

Therefore, it is best to only water every 3 or 4 weeks during the winter to prevent your string of pearls from turning brown or yellow and mushy.

If your string of pearls shows no signs of recovery, it may be due to root rot. At this point, you should propagate any healthy-looking parts of the plant so it can survive.

Strings of pearls are very easy to propagate by cutting off the stems, and you can grow plants as long as you take a cutting from healthy growth.

Watch this YouTube video to learn how to propagate strings of beads from cuttings:

Pearl necklace turns brown from sunburn or lack of light

Pearl necklace plants grow in bright, indirect light. When placed in intense full sun, the leaves will discolor, which can cause them to turn brown.

Sunburn often occurs because of the contrast when the string of pearls is moved from a shaded area to an area with more sun, causing the leaves to turn brown and possibly shrivel.

However, if the string of pearls is in the shade with no bright indirect light, it can become leggy with longer stems and the leaves or pearls closer to the base of the plant will turn brown and die.

This is because the string of pearls diverts energy to the newer leaves, causing the older leaves to die.

Plant stems tend to grow longer in search of brighter light, which can give a leggy appearance.

How to revive sunburned pearl necklace plants

The key to reviving a sunburned or leggy pear string is to find an area of ​​bright indirect light in your home to replicate the shaded but light areas where the pearl string grows in its natural environment.

Scorched brown leaves often don’t recover in appearance, so it’s necessary to trim the section of plant back to healthy growth.

If most of the plant is burnt brown, you may need to propagate all healthy growth sections to save the plant.

If the leaves have shriveled due to excessive heat from full sun, then soak the soil well.

For strings of pearls in too much shade, cut back leggy growth when you think it’s looking messy and the plant should recover.

Make sure your string of pearls is in bright indirect light and it should come alive.

(To learn more, read my article Why is my pearl necklace turning brown to learn how to save it).

The central theses:

Many indoor gardeners struggle with growing a string of beads plant. Here are 10 reasons why you might be having trouble with this hanging succulent and what you can do to fix the problems.

String Of Pearls, they grow fabulously both as a houseplant and in a container in the garden. I’ve grown her indoors and outdoors in a variety of climates and find her easy to grow when the conditions/care are to her liking.

I want to share with you why growing a string of pearls indoors can be a bit tricky. Hopefully this will help you make yours look as beautiful as those strands around Audrey Hepburn’s neck in Breakfast at Tiffany’s.

I learned the botanical name as Senecio Rowleyanus, but you may see it as Curio Rowleyanus. Besides String Of Pearls, another common name is String Of Beads.

Commons pearl necklace plant care issues

The most common signs that a string of pearls is not doing well are: the stems and pearls are thinning, pearls are shrinking, pearls are yellowing, and the stems are dying.

One of our most popular blog posts (it’s an old one!) is on String Of Pearls, so I get a lot of questions regarding this plant dying or not thriving. This hanging succulent can be hard to find and expensive in some areas, so I want to dig a little deeper.

String Of Pearls Issues Indoors Video Guide

1. The floor is too heavy

Succulents need their soil mix to have excellent drainage and be well aerated. Some growers use the same soil mix for all of the plants they grow, and that may be the mix yours came from. Or maybe you used potting soil when you transplanted yours. Both could be too heavy and stay wet for too long or a string of pearl plants.

When I repot my string of pearls I use this succulent soil and cactus mix recipe. It’s good and chunky so water drains easily. All my indoor and outdoor succulents love it.

It is important that the pot has drainage holes so that excess water can drain away easily. Failure to do this can lead to overwatering and eventual root rot.

If you’re using a store-bought succulent and cactus mix like this, consider adding some pumice or perlite to further increase the aeration and lightness factor. Here’s a good option I’ve used in the past that’s a gritty, quick-draining mix. Nothing needs to be added.

I give most of my houseplants and succulents a light application of vermicompost every spring, topping with a light layer of compost on top. Very simple – a 1/4″ layer of each for a 6″ strand of beads is sufficient. Read more about my vermicompost/compost feeding here.

RELATED: I’ve created this general guide to transplanting plants, aimed at beginner gardeners that you’ll find helpful.

this guide These sweetly scented white flowers are produced by String Of Pearls plants.

2. Too much fertilizer (too often; too strong in proportion) or wrong fertilizer

This can lead to fertilizer burns which lead to root damage. I’ve found that succulents don’t need much fertilizing – just once in spring and maybe a repeat application, if needed, in mid-summer.

I feed mine the usual indoors: a 1/2 inch layer of vermicompost topped with a 1/4 inch layer of compost in early spring.

I’ll mention vermicompost again because it’s my favorite addition. I use it sparingly as it’s quite rich. I’m currently using one from a local company here in Tucson, but I’ve also used Worm Gold Plus and Wiggle Worm.

The compost I use is also local and organic. Try Dr. Earth’s out when you can’t find anywhere to live. Both vermicompost and compost enrich the soil naturally and slowly to keep roots healthy and plants grow stronger. Happy roots, happy string of pearls!

If you have liquid seaweed or fish emulsion, those work well too. I now use Max Sea, alternating with Eleanor’s VF-11 a few times during the season on all my house plants. There are fertilizers for succulents and cacti, but I’ve never tried these. So the choice is yours!

I live in the sunny Arizona desert, so I now feed my succulents 3 times a year (besides the compost). Living on the California coast it was 1-2 times a year.

Whatever you use, it’s easy since succulents don’t need much or frequent feeding. For succulents like a string of pearls, consider using the fertilizer or fertilizer at half the recommended strength like I do.

RELATED: Here’s my updated routine for fertilizing houseplants.

3. Frequent fogging

Save mist for the air plants – they need it when growing in our arid living environments. Your string of pearls will not do this as it is native to the drier parts of South West Africa and can handle lower humidity. Frequent misting of this plant, especially on the crown, is likely to cause rot.

A string of pearls hangs in an east window where it receives bright light but does not touch the glass.

4. Your plant is in hot, direct sun

Keep your plant away from south or west facing windows. Especially in the summer months, the glass heats up, causing a string of pearls to get sunburned. It can be in a room with high light exposure, but make sure it’s 5-10 feet from the window (how far depends on your climate). Very bright, indirect light is their sweet spot.

As an example, here in the Arizona desert with lots of strong sun, a String Of Pearls plant would need to be 7-10 feet from south or west windows (even an east window in the hotter months). Mine is hanging in a large north-facing window with lots of light but no direct sunlight.

5. No adjustment for the darker, cooler months

This applies to all houseplants, because at this time they get a little rest. In winter, you may need to move your string of pearls to a brighter spot in your home.

Also, be sure to back off the watering frequency at this point.

If you water your plant every 7 to 14 days in the summer, then every 14 to 21 days during the winter months is probably best. How warm you keep your house is also a factor.

WARNING: Here is a winter houseplant care guide that you may find useful.

6. It is planted in a pot that is too large

The pot size is important. A string of pearls does not have a large root system. 1 transplanting into a small pot is better than a large pot. For this reason, I repot mine about every 5-7 years, sometimes just to freshen up the potting soil.

Planting one in a pot that is too large can result in the soil remaining moist, leading to root rot. The majority of the slender stems at the crown resting on the wet mix will cause both them and the pearly leaves to be “pumped out”.

4″ bead pots in the nursery. You can see how the crowns of the plants sit almost level with the pots.

These last 4 reasons are the most important in my opinion:

7. Not enough light

When grown outdoors, they need filtered light or light shade. An indoor String Of Pearls plant needs strong natural light. Medium to high light exposure with no direct, hot sun is what they need to grow successfully.

Too little light + too much water = goodbye cute hanging succulents.

By the way, I’ve found that a beaded houseplant is not a low-light plant. It grows best in bright light.

HEAD UP: This guide to how much sun succulents need will help you.

8. Planted too deep in the pot

I’ve seen this many times where the crown of the plant has sunken 1″ or more. This can cause the crown and stems to rot because they remain too wet when aeration is reduced. Those thin stalks will rot in no time.

It is best when the crown of the plant is only 1/2 – 1″ below the top of the pot. If planted too deep, along with too much water, also = bye.

9. Too much water

This happens much more often than under watering. What I mean by that is watering too often. The roots of a plant also need oxygen and keeping the mixture evenly moist deprives them of it.

Simply put, reduce watering frequency if yours is looking sad and mushy. You want the plant to be almost or completely dry before you water it again.

It’s hard for me to tell you that you should water your String Of Pearls plant indoors often, as there are many variables at play. Here are some: the pot size, the type of soil it’s planted in, where it’s growing, and the area around your home.

I’ll tell you how often I water my 6″ String Of Pearls here in Tucson. Once a week in summer and every 2 weeks in winter. Keep in mind that I am in a sunny climate with warm or hot temperatures for much of the year. Adapt to your climate.

You don’t want to keep the plant wet, but then again, you don’t want the soil mix to be dry for days. These slender stems don’t hold as much water as other succulents.

Here are a few common signs that you’re over or under watering. Too much water: The pearls are brown and/or mushy. In addition, the beads could shrink. Not enough water: The beads and stems are dry. In addition, the pearls shrink. The shrunken beads can be confusing because this happens in both cases.

HEAD’S UP: These posts on watering houseplants and how often to water succulents will shed some light on the subject.

Me & my pearl necklace. I’ll be repotting it into a decorative hanging pottery soon, so stay tuned for the post and video.

10. The system was discontinued at the time of purchase

If your String Of Pearls plant was soggy when you bought it (many large department stores and nurseries water their plants every day) it may never have had a chance to dry out. My friend lost a pothos as a result.

Most pots have at least 1 drainage hole. Make sure yours does, otherwise the water won’t flow out. I plant my succulents in pots with multiple drainage holes to keep water from pooling.

Every once in a while a drain hole gets clogged. You can open it again with a chopstick, toothpick, knitting needle, etc.

If the soil isn’t drying out, you may need to repot your String Of Pearls plant into a more suitable succulent cactus mix.

Want to learn more about caring for succulents indoors? Check out these guides!

A young, healthy string of pearls. The upper beads are plentiful and plump, and the plant begins to drag.

String Of Pearls definitely has character and seems to be loved here, there and everywhere. If you’re looking to grow a string of pearls indoors, I hope this helps keep yours healthy, happy, and looking great!

happy gardening,

Note: This post was originally published on March 13, 2018. It was updated in July 2020 and again in January 2022.

Looking for more about succulent houseplants?

Read more about succulents.

This post may contain Amazon affiliate links. You can read our policies here. Your cost of the products will not be higher, but Joy Us Garden will receive a small commission. Thank you for helping us spread the word and make the world a more beautiful place!

Shelley Ferguson rounds up some expert advice from The Botanist’s Eden Hessell on which houseplants will love living in this moisture-rich space

loading player…

10 houseplants that are perfect for your bathroom

Plants add interest, texture and color to your bathroom – they even purify the air. But not all houseplants like living in a humid environment. Superstar florist Eden Hessell helps us sort out our options by compiling 10 plants that are sure to thrive in your bathroom.

tail of the donkey

This easy-care succulent native to Mexico has long, drooping stems of thick, blue-green leaves that overlap like the hairs on a donkey’s tail. The cascading stems ensure this plant looks gorgeous in a hanging basket in any bathroom. This plant needs light, little water and thrives in basic humidity.

string of beads

Another low-maintenance succulent, String Of Pearls’ unique seaweed-like pearls drape over hanging baskets and create an interesting focal point in a bathroom. This drought tolerant plant likes bright, indirect light and well-drained soil—like any succulent, it will not survive overwatering.

baby’s tear

This light green, delicate, creeping herb stretches prettily over wall mounted planters or hanging baskets. It prefers shade and humidity, making it ideal for bathrooms with little natural light.

moth orchid

One of the easiest orchids to grow, moth orchids like low light, enjoy the same temperatures as us and like a bit of humidity. If you take good care of them, they will reward you with beautiful blooms for several months and add exotic elegance to your bathroom.

peace lily

Peace Lilies look beautiful in the bathroom, are easy to care for and also act as effective air purifiers. They like low to medium light and dislike being overwatered. So if you forget about them for a week, they will still reward you with great looks. Their lush green leaves and white flowers look lush in bathrooms with eclectic designs and rich wood.

Fiddle Leaf Fig

This lush, large-leaved beauty is a coveted statement plant indoors. It likes bright indirect light (i.e. lots of light but no sun exposure) and needs watering once a week. Because of its size, this plant can add grandeur and interest to large bathrooms, turning dead space into an unused corner.

staghorn fern

The Staghorn’s unique foliage resembles deer antlers and can be wired to wood and used as a wall feature to add texture and form to a modern or masculine bathroom. It is difficult to kill, likes low to medium indirect light and only needs watering every few weeks if potted, or soaking the root ball if wall mounted.

language of mother-in-law

The marbled green leaves of this popular houseplant are bold and textured, perfect for a bathroom with mid-century design influences. Also known as the snake plant, it only needs watering every 2-3 weeks, likes low to bright indirect light and thrives in steamy bathroom conditions.

asparagus

These plants are among the fastest growing, undemanding and easy-care indoor plants. They appreciate higher humidity and grow best in bright, indirect light, making them a great choice for well-lit bathrooms. They can even be trained to fall off a hanging planter or grow on a pole like a vine.

mistletoe cactus

This tropical succulent is native to the rainforests of Florida, Mexico and Brazil. While most cacti are found in hot, sunny, dry zones, the mistletoe cactus enjoys humidity and subdued lighting, making it perfectly happy in a bathroom mounted on a piece of bark like an orchid, or potted in good cactus mix is.

Words from: Shelley Ferguson

introduction

We now tell you everything you need to know about how fast strings of pearls (aka Curio Rowleyanus, also known as Senecio Rowleyanus) grow and reach maturity.

How fast does a string of pearls grow?

Pearl necklaces can grow up to an inch per month during the warmer months with proper care. They will grow quickly considering they are succulents, especially during the growing months of spring and summer and given the right care conditions.

See also: String of Pearls Propagation, String of Pearls Care, How Often – Water Succulents, Propagating Succulents in Water.

How long does it take for the pearl necklace to bloom?

Strings of pearls can bloom with small white flowers for a month. They can flower once the plant is fully grown after about a year.

Why is my string of pearls growing so slowly?

Pearl necklaces grow slowly for several reasons:

it’s cold and plant growth has slowed down, which is perfectly normal in the winter months.

the plant is root bound – if so, pot it up a size.

The plant does not get enough sunlight – put it closer to the window.

General Care: The plant needs to grow healthily, make sure you meet all the care needs. Check out our String Of Pearls care guide to learn more about how to get the most out of it.

How to make pearl necklaces thicker?

You can make a string of pearls thicker by cutting off the leggy stems, propagating them, and reinserting them into the main plant. This will remove the leggy stems and replace them with much smaller growths from above, making the plant bushier. For more information on pearl necklace propagation, see our guide: Pearl Necklace Propagation.

For more information on which cactus and succulent compost to buy or how to make your own, check out our guide: Succulent Soil.

Other Articles You May Like

I hope you found this guide useful, you may also enjoy our other articles: Pearl Necklace Propagation, Pearl Necklace Care, How Often – Water Succulents, Propagating Succulents In Water, Scindapsus Treubii Moonlight, Jessenia Pothos, Hoya Linearis, Philodendron Camposportoanum Care .

Please follow us on Instagram and Pinterest for regular plant updates and the occasional plant giveaway.

Did you know that propagating strings of pearls (scientifically known as Senecio Rowleyanus) is super easy? This popular succulent is a favorite for hanging planters and you can create as many as you like by propagating them with very little effort.

Read on for everything you need to know about pearl necklace propagation and caring for your new baby succulents!

Tip: The string of pearls isn’t the only succulent that’s easy to propagate at home. Propagating succulents in general is a breeze!

Multiply pearl necklace: Take a cutting

As with any plant, to propagate pearl necklaces, you must first take a cutting. Since it is a pendulous species with long tendrils, this is not too much of a challenge!

That’s how it’s done:

Find a nice, healthy vine on your plant. The longer the better, and it should have plump, green leaves (pearls).

Cut the vine to get a piece that contains at least a good pair of pearls. Ideally, you do this with a knife or scissors sanitized with alcohol.

Cut the cord into pieces about 10cm long if it is long. The more of these cuttings you get, the fuller your new plant will look!

Let the cord dry for a day or two. Don’t worry, it has stored enough water in the beads and that will prevent rot on the road.

That’s it! You now have one or more pearl necklace cuttings ready for the propagation process.

Did you know? Like many other succulents, a string of pearls plant can actually be propagated from a single leaf. Yes, you only need one of these peas! However, this technique has a lower success rate and can take a long time. If you can get a longer string, that’s definitely a better option.

Multiply a string of pearls in water or in the ground?

As with other indoor plants, the propagation of strings of pearls is possible both in water and in the ground. Both methods have their pros and cons, but in most cases each should work just fine.

Let’s dive into how to propagate strings of pearls in water and soil to find out which method you prefer.

water

You can place your pearl necklace in a beautiful vase or glass of water. It often takes root quite quickly this way, and the look of a bunch of cuttings in a propagation station is really quite pretty.

All you have to do is fill the container and put the vine in there so that it’s about 1/3 of the way down and can’t fall out. Place the container in a nice, well-lit and warm spot (but no direct sun!) and you should see the first roots in 2-4 weeks. Just change the water once a week, no further maintenance required.

How quick your cutting roots will depend on the time of year. In summer it can be a very quick process while in winter it can take a few weeks. Once the roots are an inch or two long, you can pot the plant or leave it in water indefinitely.

© Luoxi on Adobe Stock

floor

If you plan on potting your cuttings at some point, it’s best to root them in soil right away. By nature, string of pearls is a creeping plant that has evolved to root anywhere it touches the ground, meaning it will have no problem pulling roots from a cutting in a good soil mix.

This is how the propagation of strings of pearls in the ground works:

Find a gritty soil mix suitable for succulents that need excellent drainage. You can read more about how to mix one yourself in the article on planting succulents, or opt for a pre-mixed succulent soil.

You need a planter with a hole in the bottom to encourage drainage and prevent standing water from causing root rot.

Fill the planter and carefully insert the vine cuttings. Just make sure they touch the ground and can’t fall out.

Put the container in a well-lit place out of direct sun and wait. It will take anywhere from a few weeks to a month or two for a good root system to develop.

You can spray regularly at first so as not to disturb the cuttings too much. Once they are well established, you can switch to a regular succulent watering schedule.

How to care for pearl necklaces

The string of pearls is unfortunately not the easiest succulent plant out there. Many houseplant lovers are lured by the lush vines, only to encounter problems with rot, sparse vines, and sad pearls.

So is this just a species for advanced houseplant lovers? Not necessarily. You just have to figure out what it takes!

Indoors, you need to give a pearl necklace the brightest light you can offer. It will love being outside in the summer, but if you do bring it out be sure to protect it from the harshest rays.

As far as watering goes, this is a typical succulent. He really doesn’t like wet feet, but he needs more water than some think. The trick is to let the soil dry out completely and then drench it. How long this takes depends entirely on the environment and time of year.

Tip: Would you like to find out more? Everything you need to know about this succulent can be found in the complete pearl necklace care guide.

If you have any other questions about pearl necklace propagation or would like to share your own experience with this popular succulent houseplant, don’t hesitate to leave a comment below! 🌱

The container for your pearl necklace is also important. It needs to provide good drainage – terracotta is great for this – but the pot also needs to be the right size so the vines can naturally overflow the rim. Your plant should be almost level with the top of the pot (and definitely no more than an inch below the rim of the pot) so the tendrils don’t have to reach up before they flow down. You want to make it easy for them!

You might be concerned that the crown of your pearl necklace is sparse or going bald. But don’t worry because this is an easy fix. I’m going to give you some key tips on how to turn things around and make your pearl necklace fuller and more vibrant.

To make your string of pearls fuller, cut a few pendants and place them on the ground on bare spots. Use a few pins to pin them down and add more soil to encourage aerial root growth. Give the right water, light and fertilizer for a nice and full pot.

Your string of pearls is known to be slower growing and more difficult to care for than other Senecio plants. You need to make sure your plant is getting enough nutrients, light, and moisture year-round for it to thrive.

Why is my pearl necklace thin?

sunburn

If the tip of your string of pearls is crispy and thin, your plant is more likely to get sunburned. You may expose your succulent to intense direct sunlight.

This is especially the case if you park your plant where it will get scorching afternoon sun. East and south windows can cause sunburn on your pearl necklace, especially in summer afternoons.

Too much direct sunlight will not only burn the pearls, but will also damage the trailing stems. This means that pearls on the sunburned stalks are deprived of nutrients and water.

Think of a village with only one bridge. If that bridge goes away, the entire village will lack the means to get what they need from out there. The same goes for your sunburned pearl necklace.

The result is stunted growth and some pearls die off, resulting in a sparse or thin appearance.

submersion

As you may have noticed, your string of pearls is not too picky about water requirements. Just keep your plant’s soil slightly moist (but never soggy) during the growing seasons, namely summer and spring.

However, if you allow the soil to dry out completely for an extended period of time, your string of pearls will respond by shedding its leaves. Some leaves will wither, dry up, and eventually fall off.

The first sign of underwatering is usually when the nearly spherical, pea-shaped leaves begin to flatten out. If the dry spell continues, the leaves will shrivel, dry up and turn brown.

If the beads and stems have turned brown or purple, you may have waited too long. The whole plant will eventually wither and die. Soak your submerged pearl necklace slowly and it can recover after a few days.

To be safe, wait for the top two to three inches of soil to dry completely before watering again. You shouldn’t wait until the beads and stems are brown or sunburnt.

overhydration

As a dry climate plant, the string of pearls likes it rather dry when it comes to water. In fact, you’re more likely to kill your string of pearls by giving it too much water than not enough.

Overwatering is the number one reason for a pearl necklace dying. And you don’t want that. It all starts with the leaves thinning, then withering and finally the whole plant dying.

You should wait for the topsoil (2-3 inches) to dry completely. Only then water thoroughly until liquid emerges from the lower drainage holes. Give your plant about 10 minutes to absorb more H2O and then pour out excess water.

If you water too much, the soil will become soggy and waterlogged. Soggy soil inevitably attracts pests, disease, and root rot. Your plant will look weak and mushy at the crown, resulting in stem and leaf loss.

Other symptoms of an overwatered string of pearls include brown pearl tips, yellowing, and leaf drop.

How to make a pearl necklace fuller

Cut the pendants of your pearl necklace correctly

You know, nothing livens up your room like a full, luscious string of pearls. The stems flow gracefully over your hanging basket or pot, making it a feast for the eyes.

This is why it can be discouraging to see bald or thin patches on the crown of your pearl necklace. Your mission is to fill in those gaps on the crown with more stems and beads. As?

Just grab a few trailing stems and place them on the ground. You want the stems to cover or curl up the bare spots on the ground.

Alternatively, you can cut off a few strands of your pearls and place these stem cuttings on the thin crown areas. This is a more effective way as it is very similar to propagation. You will need a well-made set of pruning shears, trowel and pins.

Use a few pins to tack the stems into the ground. You can use wooden pegs or gardening needles. This ensures that the cut or laid strands of beads are touching the ground, allowing new roots to sprout and absorb water and nutrients.

Add more soil to encourage aerial root growth

Once you’ve pinned or laid the strands at the crown, consider adding more soil. This should slightly cover the pendant stem cuttings. Make sure you lift the soil up to the beads.

The added earth does two things. First, the newly placed strands will dig into the soil easily and develop new roots more quickly. Second, having a light ground cover will encourage aerial root growth, allowing them to start watering and nutrient sooner rather than later.

What type of floor is great for the job? You can get away with the best draining and fertile potting soil. However, I’ve found that a mix of potting soil with perlite (in a 2:1 ratio) works better.

You can also use cactus mix. Be sure to add some perlite in the equal ratio of 2 parts cactus mix to 1 part perlite. Also make sure that the soil is slightly moist and not too wet or soggy to avoid unwanted guests in the form of fungal infections.

You can also cut along the trailers to reveal apical dominance. If you cut off the parting region (tips of your strands), your pearl necklace will go into survival mode. This tells the strings to grow more branches and more beads on the stems, creating a fuller look.

Fertilize your string of pearls

Your string of pearls will grow quite vigorously in the spring and summer if you give it enough fertilizer (and the right light). For more robust growth you should increase your fertilization.

Ideally, you should fertilize your plant every two weeks during the rapid growth phase. That’s what you want to make it fuller. For best results, use a commercially available water-soluble or liquid houseplant fertilizer.

Make sure you have a balanced ratio of nitrogen, potassium and phosphorus. Dilute your fertilizer to half strength and apply while watering. Don’t over-fertilize your string of pearls, however – this will scorch the leaves, burn the stems and kill your plant.

During the dormant period (aka winter), you should only fertilize your string of pearls about every 6 weeks.

Make sure there is enough bright, indirect sunlight

Unfortunately, you’d expect your string of pearls to thrive in full sun—it’s a dry-climate species, after all. But that’s not a good idea. Your pearl necklace feels most comfortable in a combination of half sun (in mild morning hours) and half shade.

In practice, however, you should give your plant 6-8 hours of bright, indirect sunlight each day. You should park your string of pearls near an east-facing window during the warmer morning hours for indoor growing.

Later, when the afternoon sun is harsh, make sure it’s an area that gets indirect, diffused light or partial shade. Your string of pearls needs a lot of this bright, indirect light to photosynthesize and grow fuller.

Keep them well watered

Casting is perhaps the biggest dilemma you will face when caring for your pearl necklace. How much does it take to thrive? And what is too much water?

There are two best practices for knowing when to water your pearl necklace:

[i] Water when the bead is just beginning to flatten. Don’t wait for them to wrinkle, shrink, or worse, turn brown.

[ii] Check the top 2-3 inches of soil. When the soil is completely dry, it’s time to water. If it doesn’t, wait a few days and then check again.

As a rule of thumb, you should keep watering your pearl necklace until the liquid runs out of the bottom of the pot. You should leave it like that for about ten minutes and then empty the saucer.

Make sure it’s the right temperature

A pearl necklace works best in warmer temperatures ranging from 21-26°C (70-80°F) from early spring to late summer. During the cooler winter months, make sure the temperature stays between 13-16°C (55-60°F).

They get sunburned if you expose them to too much blazing sunlight or heat. More importantly, a string of pearls is a very cold-sensitive plant, so avoid cold drafts.

In this post, you will learn how to multiply pearl necklaces. Propagating pearl necklace plants is easy—in fact, it’s one of the easiest plants to propagate.

How to propagate pearl necklaces from cuttings

I recently wrote about how to care for a string of pearls – or Senecio rowleyanus, also known as string of pearls or string of peas. It’s a beautiful succulent with long, threadlike stems covered in round pea- or pearl-like leaves. Hence the name pearl necklace or pearl necklace.

How to propagate plants? Check out my post on propagating golden pothos from cuttings, snake plant propagation, and propagating prickly pear pads!

If a string of pearls is happy where it is and you give it the right amount of water, it will grow like weeds. The stems and leaves can grow up to 3 feet long, and you can loop the stems back into the plant to encourage fuller growth.

Clipping or trimming your pearl necklace is a great way to keep it looking healthy and happy. Although frequent pruning isn’t necessary, most plants will enjoy a little extra maintenance in the form of a haircut every now and then. And since the string of pearls is a succulent, propagating and growing new plants from cuttings is extremely easy!

There are two great ways to propagate pearl necklace plants: by rooting cuttings in water and by rooting cuttings in soil. But unlike many other succulents, don’t propagate strings of pearls with leaves; You multiply it with a cutting.

multiplication in water

Propagating strings of pearls in water is very easy. It is a very similar process to propagating pothos cuttings in water. You simply take stems from your existing plant, I would say about 3-5 inches long. Then carefully strip the leaves from the bottom third of the stem. This is the area that will go into water.

I use a mason jar to propagate pothos cuttings, but since pearl necklace cuttings are so much shorter and more fragile, I use a small glass bowl. It’s the perfect size for letting the leafless stems rest in the water. Then I place the bowl in an area that gets good light, right next to our sliding glass door that gets midday, afternoon, and evening sun.

Within a few days you will see thin white (almost translucent looking) roots emerging from the nodes on the stem. The cuttings in this picture started to root in just about 24 hours! But I left them in the water for a total of three days so that the roots could grow nice and long.

Once the roots were ready for soil, I carefully planted the cuttings in a small container to root in soil. I keep a few small containers on hand for rooting such cuttings. You don’t want to just toss them in a giant new pot!

Be careful not to knock off the new roots when planting; they are still fragile. After a few weeks of further rooting, it’s safe to say you have a new thriving plant. You can repot the string of pearls into a slightly larger pot where it will live until it outgrows it.

Propagation of strings of pearls in the soil

Pearl necklace plants can also be propagated in soil, similar to the prickly pear cactus, which can be stuck directly into the ground without the need for water rooting. The steps for propagating bead necklace cuttings in soil are very similar to rooting in water, except I would make the cuttings a hair longer.

Instead of 3-5 inches, I would recommend 5 inches so you can plant them safely. You will still be removing the leaves from the bottom third of the cut to reveal many knots. Then, instead of rooting it in water, carefully plant it in some well-draining potting soil. Don’t pack it too tightly.

Be careful not to overwater and provide adequate drainage. Nothing will kill your new little baby faster than water logs! You can also place the cutting over soil and mist it to help it take root. This is a similar process to propagating succulent leaf cuttings. The new plant should start rooting quickly.

Because pearl necklace plants are so easy to propagate and grow, you can make many, many plants out of just one. They make wonderful gifts as they look so unique and are easy to care for! Put a new plant in a cute pot with a nice note with care instructions – it’s the perfect gift for any plant lover, new or existing!

Rooted and transplanted

Grow out of its pot

Moved outside in June

Until the end of August!

Want to read more about plant care tips? Check out my post on indoor succulent care, pothos plant care, snake plant care and more. Also, don’t miss the roundup of indoor planter DIYs to help you decorate with plants!

Share my tips for spreading pearl necklaces on Pinterest!

Common Name Turtleneck Botanical Name Peperomia prostrata Family Piperaceae Plant Type Semi-succulent Mature Size 12 inches long, 3-4 inches wide Sun Exposure Bright, indirect light Soil Type Clay, moist Soil pH Neutral to Acid Hardiness Zones 10 through 12, USA Native Range Brazil

String of Turtles care

With proper care, a row of tortoise plants can be the pride of a tropical plant collection, but it takes a little effort and some adaptation to the typical methods used to care for most succulents. But different does not mean complicated. A properly cared for Peperomia prostrata will reward owners with a unique, manicured, trailing succulent.

The Spruce / Krystal Slagle

The Spruce / Krystal Slagle

light

Tortoiseshell plants love bright, indirect sunlight and will thrive in these conditions. Keeping these plants in full sun for too long will damage the foliage, but too little light and they will not produce new growth. Due to the climbing nature of the plant, make sure the light reaches the top of the plant to keep it producing new growth. Vine plants are often placed on high shelves or areas without light, causing the plant to stop producing new growth. Make sure the light reaches all areas of the plant.

floor

Those familiar with growing succulents may be used to using pre-mixed soil specially formulated for succulents and cacti. These premixes should not be used for turtle necklaces.

Instead, a mixture consisting primarily of organic matter should be used. One rich in peat is ideal. This formula is easily found in a commercial seed stock mix. Peat is acidic, which is perfect for this plant, but be careful not to let the pH get too low. It’s a good idea to test the soil from time to time. Make sure the soil drains well.

water

Turtle plants tend to suffer more from overwatering than dry conditions. The plant comes from the Brazilian rainforest and therefore prefers slightly humid conditions. Make sure the pot has drainage holes, water well and allow the soil to dry out between waterings.

Avoid overwatering by soaking the soil until water runs out of the bottom of the pot and the soil is thoroughly moist. Do not water the plant again until the top two inches of soil has dried out.

temperature and humidity

This plant prefers cooler, wetter temperatures than the warmer temperatures most succulent fans expect. Keep your turtle necklace in a consistent temperature environment that ranges from 68 to 75 degrees Fahrenheit. It doesn’t like cold temperatures, so avoid placing it near outside doors or drafty windows, and if you’ve placed it outside in the summer, make sure you bring it inside before temperatures get chilly. During the drier summer months or when a heater is running in winter, you can use an atomizer or humidifier to increase the humidity around the plant, as long as care is taken not to leave the leaves wet.

fertilizer

Feeding turtle strings helps the plant maintain its radiant vigor and ensures that the color and pattern of the leaves are maintained throughout the growing season. Feed them bi-weekly during the growing season with a diluted houseplant fertilizer – fertilizing during the fall or winter months is not recommended.

Cut turtle chain

If turtle chains are not trimmed regularly, they can develop an unkempt, ragged, and leggy appearance. With occasional pruning, you can remove dead and damaged stems and leaves and tame unwanted growth. It also encourages new, more vigorous growth to flourish. Make all cuts with sanitized scissors or very sharp scissors.

Turtle reproductive chain

Propagating tortoise plants from cuttings is an easy, no-fuss way to expand your plant collection or develop plants to give to friends. You can propagate the plant at any time of the year with just a few simple steps. Here’s how:

Using a mature mother plant and clean, sharp scissors, take a few cuttings just below a node. The cut should be at least 3 cm long. Remove any leaves from the lower part of the cutting, near where you removed the stem from the plant. Fill a small pot with regular potting soil that is moist but not soggy. Plant the cut end of the stem into the potting soil, making sure at least one node falls below the soil surface. Dipping the stem in rooting hormone can help speed up the process, but isn’t usually necessary. Place the plant in a spot that gets bright, indirect light. Keep the soil moist but not soggy. After a few weeks, gently tug at the cutting – if you feel resistance, roots have formed and you can now tend your plant as usual.

Common pests and plant diseases

In general, tortoiseshell plants are not overly susceptible to major pests or diseases. Like most houseplants, they can be susceptible to pests like whiteflies, mealybugs, and spider mites. If you spot signs of infection, treat the plant with insecticidal soap or neem oil. Additionally, turtle plants are sensitive to overwatering and will develop root rot if not in well-drained soil or a container with adequate drainage holes.

In this post, you will learn how to multiply pearl necklaces. Propagating pearl necklace plants is easy—in fact, it’s one of the easiest plants to propagate.

How to propagate pearl necklaces from cuttings

I recently wrote about how to care for a string of pearls – or Senecio rowleyanus, also known as string of pearls or string of peas. It’s a beautiful succulent with long, threadlike stems covered in round pea- or pearl-like leaves. Hence the name pearl necklace or pearl necklace.

How to propagate plants? Check out my post on propagating golden pothos from cuttings, snake plant propagation, and propagating prickly pear pads!

If a string of pearls is happy where it is and you give it the right amount of water, it will grow like weeds. The stems and leaves can grow up to 3 feet long, and you can loop the stems back into the plant to encourage fuller growth.

Clipping or trimming your pearl necklace is a great way to keep it looking healthy and happy. Although frequent pruning isn’t necessary, most plants will enjoy a little extra maintenance in the form of a haircut every now and then. And since the string of pearls is a succulent, propagating and growing new plants from cuttings is extremely easy!

There are two great ways to propagate pearl necklace plants: by rooting cuttings in water and by rooting cuttings in soil. But unlike many other succulents, don’t propagate strings of pearls with leaves; You multiply it with a cutting.

multiplication in water

Propagating strings of pearls in water is very easy. It is a very similar process to propagating pothos cuttings in water. You simply take stems from your existing plant, I would say about 3-5 inches long. Then carefully strip the leaves from the bottom third of the stem. This is the area that will go into water.

I use a mason jar to propagate pothos cuttings, but since pearl necklace cuttings are so much shorter and more fragile, I use a small glass bowl. It’s the perfect size for letting the leafless stems rest in the water. Then I place the bowl in an area that gets good light, right next to our sliding glass door that gets midday, afternoon, and evening sun.

Within a few days you will see thin white (almost translucent looking) roots emerging from the nodes on the stem. The cuttings in this picture started to root in just about 24 hours! But I left them in the water for a total of three days so that the roots could grow nice and long.

Once the roots were ready for soil, I carefully planted the cuttings in a small container to root in soil. I keep a few small containers on hand for rooting such cuttings. You don’t want to just toss them in a giant new pot!

Be careful not to knock off the new roots when planting; they are still fragile. After a few weeks of further rooting, it’s safe to say you have a new thriving plant. You can repot the string of pearls into a slightly larger pot where it will live until it outgrows it.

Propagation of strings of pearls in the soil

Pearl necklace plants can also be propagated in soil, similar to the prickly pear cactus, which can be stuck directly into the ground without the need for water rooting. The steps for propagating bead necklace cuttings in soil are very similar to rooting in water, except I would make the cuttings a hair longer.

Instead of 3-5 inches, I would recommend 5 inches so you can plant them safely. You will still be removing the leaves from the bottom third of the cut to reveal many knots. Then, instead of rooting it in water, carefully plant it in some well-draining potting soil. Don’t pack it too tightly.

Be careful not to overwater and provide adequate drainage. Nothing will kill your new little baby faster than water logs! You can also place the cutting over soil and mist it to help it take root. This is a similar process to propagating succulent leaf cuttings. The new plant should start rooting quickly.

Because pearl necklace plants are so easy to propagate and grow, you can make many, many plants out of just one. They make wonderful gifts as they look so unique and are easy to care for! Put a new plant in a cute pot with a nice note with care instructions – it’s the perfect gift for any plant lover, new or existing!

Rooted and transplanted

Grow out of its pot

Moved outside in June

Until the end of August!

Want to read more about plant care tips? Check out my post on indoor succulent care, pothos plant care, snake plant care and more. Also, don’t miss the roundup of indoor planter DIYs to help you decorate with plants!

Share my tips for spreading pearl necklaces on Pinterest!

The string of pearls is originally from South Africa and its stems of round leaves can grow up to a meter long. Additionally, white flowers that look alien grow on the string of pearls, with strange purple stamens that look like antennae sticking out of them, topped by purple and yellow pollen-tipped arms. While these plants are beautiful to look at, they are poisonous to your dog, so it’s best not to have them anywhere your dog could get to. Ingestion can cause symptoms ranging from diarrhea to liver failure. Itchy, sore skin will also cause your pet stress.

The strange, succulent leaves that look like green beads hanging from the plant in long strands give this plant its unique name. Though beautiful, the string of pearls is poisonous to both dogs and humans. In humans, consumption of any part of the plant can cause moderate gastrointestinal symptoms such as nausea and vomiting. However, if your dog is consuming strings of pearls, the toxic compounds in the plant can be devastating. In addition, contact dermatitis, including severe irritation, rash, itching, pain, inflammation, and soreness, is caused by skin contact.

general information

Unique and unusual looking, String of Pearls plants are easy to care for and propagate. They look a lot like a pearl necklace but probably don’t wear it like a 📿

❓ Let me know in the comments if you have any questions about the pearl necklace or any suggestions for plants you want me to talk about in the future

care instructions

🔪How to kill

It’s actually pretty hard to murder the pearl necklace, but like I said, you could just pull that thing out of the ground and wear it like a necklace 📿🔜👻

Drowning is always an option 🌊🌿

🌍ground

Pearl necklace plants, like most succulents, prefer sandy, well-drained soil. If you’re using regular potting soil, mix in some sand, perlite, or vermiculite to improve drainage

💦Water

Pearl necklace plants are quite thirsty for a desert plant, requiring water about every 7 to 10 days during growth and about every 3 to 4 weeks during winter. Just make sure the soil is allowed to dry out completely between waterings to avoid root rot.

Whenever possible, use room temperature filtered or “aged” water (water that has been left in an open container for several days to remove chlorine). After each watering, empty the drip tray under the plant

💩Fertiliser

Fertilize at half strength with a balanced succulent or all-purpose liquid fertilizer every 2 weeks in spring and summer, do not fertilize in fall and winter when the plant is dormant

🌞Environment