당신은 주제를 찾고 있습니까 “albi clad 800 – ALBI Clad 800 – (1-3 hrs Intumescent Fireproofing material)“? 다음 카테고리의 웹사이트 Chewathai27.com/you 에서 귀하의 모든 질문에 답변해 드립니다: https://chewathai27.com/you/blog. 바로 아래에서 답을 찾을 수 있습니다. 작성자 Stars Management DMCC 이(가) 작성한 기사에는 조회수 14,950회 및 좋아요 42개 개의 좋아요가 있습니다.
Table of Contents
albi clad 800 주제에 대한 동영상 보기
여기에서 이 주제에 대한 비디오를 시청하십시오. 주의 깊게 살펴보고 읽고 있는 내용에 대한 피드백을 제공하세요!
d여기에서 ALBI Clad 800 – (1-3 hrs Intumescent Fireproofing material) – albi clad 800 주제에 대한 세부정보를 참조하세요
STARS MANAGEMENT DMCC
HDS Tower, Suite 305
Jumeirah Lake Towers, Dubai,U.A.E
Tel: +971 (04) 457 2383
P.O.BOX : 25867, DUBAI,UAE
Information: [email protected]
Visit us at: www.starsmanagementdmcc.com
We are the exclusive agent of ALBI Manufacturing in Middle East, Africa, Afghanistan and CIS region for the different fireproofing materials.
Albi Clad 800 is UL Classified for one to three hours (1-3 hrs) protection under ASTM E -119 and UL 1709 High Rise, Hydrocarbon fire test criteria. Albi Clad 800 intumescent coating is being applied to protect both internal and external structural steel, concrete and other construction materials from fire. Below are the following advantages of Albi Clad 800:
Advantages of Albi Clad 800
UL Classified for one to three hour Under ASTM E-119 \u0026 UL 1709 High Rise, Hydrocarbon fire test.
Single Component
Solvent Base
Easy for Application
Low Labor Cost
Wastage only 3-5 percent
Small Equipment is required to spray Albi Clad 800
Light Weight, hammer- hard, thin-film application
withstand severe weathering and Abuse
Aesthetic, and Architectural finish
Usable for interior and Exterior.
For more details please visit our website at
www.starsmanagementdmcc.com or send email to [email protected]
albi clad 800 주제에 대한 자세한 내용은 여기를 참조하세요.
Albi Clad 800 – Albi Protective Coatings
Albi Clad 800 is for Exterior or for rugged interior use. It is a heavy-bodied, solvent-based mastic designed to withstand exterior weathering and challenging …
Source: albi.com
Date Published: 1/24/2021
View: 268
Albi Clad 800 | US Coatings
Albi Clad 800 is an intumescent mastic coating applied to structural steel, concrete and other construction materials for the purposes of fire protection.
Source: www.uscoatings.com
Date Published: 2/1/2021
View: 905
Albi Clad 800 – Hood Finishing Products – Abrasion Resistant
Albi Clad 800 is an intumescent mastic coating applied to structural steel, concrete and other construction materials for the purposes of fire protection.
Source: www.knowde.com
Date Published: 7/27/2021
View: 8354
Albi Clad 800 ADVANTAGES
Albi Clad 800 intumescent coating is applied to protect both internal and external structural steel, concrete and other construction materials from fire.
Source: www.preformed.co.nz
Date Published: 1/30/2022
View: 5506
ALBI CLAD 800 (TROWEL GRADE) – Industrial Paint Store
ALBI CLAD 800 (TROWEL GRADE). ALBI CLAD 800 (TROWEL GRADE) · Larger Photo. Our Price: $1,123.45. Product Code: AC-800TG-05 …
Source: www.industrialpaintstore.com
Date Published: 7/19/2022
View: 8722
Albi Clad TF: Fire Rated Intumescent Paint – Techmat Supply
Albi Clad TF is listed by Underwriters Laboratories for up to 3-1/2 hours of fire protection. · Albi Clad TF is applied like paint using an airless spray pump …
Source: fireproofing.us
Date Published: 5/4/2021
View: 8376
Albi Clad 800
Albi Clad 800 intumescent coating is applied to protect both internal and external structural steel, concrete and.
Source: pds27.egloos.com
Date Published: 10/2/2021
View: 634
Albi Intumescent Coatings – Pacific Southwest Coatings
Albi Clad TF fireproofing is a water-based, thin-film, intumescent coating that represents an aesthetic breakthrough in fire protection for exposed …
Source: pacificsouthwest.net
Date Published: 8/20/2021
View: 9172
주제와 관련된 이미지 albi clad 800
주제와 관련된 더 많은 사진을 참조하십시오 ALBI Clad 800 – (1-3 hrs Intumescent Fireproofing material). 댓글에서 더 많은 관련 이미지를 보거나 필요한 경우 더 많은 관련 기사를 볼 수 있습니다.
주제에 대한 기사 평가 albi clad 800
- Author: Stars Management DMCC
- Views: 조회수 14,950회
- Likes: 좋아요 42개
- Date Published: 2014. 7. 24.
- Video Url link: https://www.youtube.com/watch?v=GfeiApeRyJU
Albi Clad 800
FINISHED APPEARANCE
Can you paint or topcoat Albi Clad 800?
Yes, Albi Clad 800 can be covered with a compatible topcoat. As long as you use a compatible product, a topcoat will not affect the fire rating or performance. You might choose to use a topcoat to achieve a certain color.
Is a topcoat required?
No. Albi Clad 800 is complete without any topcoat. It is NOT necessary in most cases to coat it for additional protection. (In unusually severe exposure areas such as the Gulf Coast, Great Lakes or all coastal applications, we recommend the use of our Albi Polyurethane Topcoat, to add an extra layer of protection.)
Does Albi Clad 800 come in colors? Can you tint it?
No, Albi Clad 800 comes only in off-white. You cannot tint it, as adding sufficient quantities of pigments could affect the fire performance. If you want a colored finish you may cover the Albi product with a compatible topcoat.
What does the surface texture of Albi Clad 800 look like?
Albi Clad 800 is a uniform off-white. It is hammer-hard, with a fairly smooth surface.
SUITABLE LOCATIONS
Can Albi Clad 800 be used in both interior and exterior locations?
Yes, Albi Clad 800 is UL classified for up to 3 hours protection of both interior and exterior steel. It is extremely rugged and resistant to weathering, as well as challenging industrial interiors. For interior applications that are less demanding, specify Albi Clad TF, our water based interior product.
Can Albi Clad 800 withstand high humidity? Repeated washing? Weathering? Impact? Vibration?
Albi Clad 800 is extremely durable. It is highly resistant to abrasion, impact, humidity, ultraviolet exposure, extreme temperatures, washing, and chemical fumes. It maintains excellent fire protective properties even when exposed to years of extreme abuse and vibration.
It is has performed very well on offshore drilling platforms, power plants, and petrochemical plants, which demonstrates its ability to withstand severe environments.
FIRE RATINGS, CODES AND APPROVALS
Why do you stress UL, Inc?
Underwriters Laboratories Inc is the undisputed leader in the evaluation of fire resistive construction materials. UL conducts extensive fire tests of the rated assemblies. In addition, UL subjects the coating to accelerated aging, elevated humidity, industrial atmosphere, salt spray, ultraviolet light, freezing and simulated rain, and then exposes those samples to the fire tests. UL makes follow-up visits to the manufacturer to assure that the product sold continues to match the product tested.
UL’s facilities, fire test experience, environmental assessments, rigorous impartiality, and wide acceptance by code officials and other authorities, are unmatched by other testing bodies.
What is the maximum hourly rating you can achieve?
Albi Clad 800 is rated by UL for up to 3 hours.
Does Albi Clad 800 comply with BOCA, SBCCA, and ICBO and IBC requirements?
Yes, Albi Clad 800 meets all relevant local, state, and regional building codes.
Do you have city code approvals such as MEA, LARR, and SF?
Albi Clad 800 has been reviewed and is accepted by all individual state and city building codes, including New York, Los Angeles, and San Francisco.
STEEL CONFIGURATIONS
We need fireproofing for steel columns embedded in block walls with column face exposed on both sides. Would Albi Clad 800 work there?
Yes. While no exact tests exist, you could use the standard column listing. The block would act as an additional heat sink.
How do you best fireproof a steel truss?
It depends on the size of the elements that make up the truss. If the steel components are small, then an intumescent is not the most suitable product. Albi DriClad would be better.
If the truss is larger, the elements are similar to steel sizes that have UL listings and you can work from those listings.
How can I fireproof ductwork, such as grease ducts or air handling?
Ductwork is best protected by Albi DriClad. Intumescents are not designed for use on sheet metal.
How do you fireproof steel rods holding up a suspended walkway?
Unless you have a recoverable spray booth, the only way to economically fireproof steel rods is by gloving the material onto the rods.
I have a roof joist that I wish to leave exposed. What do you suggest?
Typically roof joists are quite small and are not good candidates for intumescent fireproofing. Consider using Albi DriClad instead.
How do I fireproof lintels to conform to Building Code?
Here too, no exact UL listing exists for any manufacturer. For the most part you should use the most restrictive fire test, i.e. a column listing. However because the lintels are horizontal, most code officials prefer a beam listing.
UL beam designs call for flutes of metal deck to be filled. How is that accomplished?
As with most UL designs of this order, the accepted method is to fill the flutes with safeing material (4 lb/cu. ft.)
Can clips for hangers be attached over the material?
Yes, clips are usually best installed after the fireproofing has been applied.
ABOUT THE MATERIAL
Does Albi Clad 800 contain asbestos?
No. All Albi products are free of asbestos.
What is Albi Clad 800 made of?
Albi Clad 800 is a proprietary formulation consisting of heavy-bodied vinyl based resins, binders, intumescent agents and reinforcing inorganic fibers.
What are the major differences between Albi Clad 800 and your interior thin film fireproofing, Albi Clad TF?
Albi Clad 800 is for Exterior or for rugged interior use. It is a heavy-bodied, solvent-based mastic designed to withstand exterior weathering and challenging industrial uses. Albi Clad 800 requires a slightly thicker application than TF and the texture is considerably rougher.
Albi Clad TF is for Interior use. Fire ratings can be achieved with a very thin coating with a smooth aesthetic finish. Albi Clad TF is water-based.
APPLICATION OF THE PRODUCT
Do you have to be an approved contractor to apply Albi Clad 800?
Definitely. Applicators must be trained to apply Albi Clad 800 according to our instructions. Our sales representative or our headquarters office can provide a list of approved, experienced contactors who have been trained at Albi Manufacturing.
Does Albi Clad 800 require specialized spray equipment?
Albi Clad 800 is a heavy-bodied mastic that is sprayed on with a standard, heavy-duty pneumatic operated, positive action pump.
Can Albi Clad 800 be applied by roller, by brush, by trowel?
For locations that are too difficult to reach by spray application, or for small patches, Albi Clad 800 can be applied by trowel, or palmed in with a gloved hand. For such situations, order the material in our trowel grade. (Rollers and brushes are not good tools for applying Albi Clad 800.)
Can you apply Albi Clad 800 to bare steel?
No, we recommend all steel be primed before applying the Albi Clad. Since our fireproofing is not formulated to function as a surface sealer or moisture barrier, a compatible primer is required to protect against corrosion. UL fire tests are made on primed steel.
What is your recommendation regarding a primer?
A compatible primer is required to protect against corrosion of steel substrates. We recommend Albi 487S, a phenolic modified alkyd primer, for use with Albi Clad 800. This is the primer used when Albi Clad 800 was tested by UL.
If you elect to use any other primer, the applicator must determine compatibility before applying the Albi Clad 800. Albi Clad 800 contains powerful solvents, of the fireproofing to adhere.
Does Albi Clad 800 protect against corrosion?
No. Albi Clad 800 is not a moisture barrier or sealant. A compatible primer must be applied first.
Is mechanical reinforcement required?
For some UL listings, reinforcement with wire mesh or fiberglass ribbon is required.
Can Albi Clad 800 be applied at the steel yard and then shipped to the jobsite?
Yes, Albi Clad 800 is often applied at the steel yard and then shipped to the job site. Care must be taken to insure proper cure before shipping, and supervision during the loading and unloading of the steel.
Do any weather conditions such as high humidity or low temperatures restrict application of Albi Clad 800?
Albi Clad 800 can be applied in most weather conditions provided certain precautions are taken. The steel must be kept free of ice, frost, moisture, etc. As a solvent-based product, Albi Clad 800 is not prone to freezing, however to maintain a good viscosity for spraying it should be warmed to 50 degrees. During hot weather it should be kept in shaded areas. Our approved applicators are trained in how to apply Albi Clad under various weather conditions.
Since Albi Clad 800 is solvent-based, is it VOC compliant?
Yes it is.
How do we dispose of excess product at job completion?
Assuming there is insufficient material to keep for the next project, allow the material to dry within the drums then hammer the sides of the drums. The material should be safe to landfill at that point, however it is imperative that the applicator check with the local waste disposal authority, and comply with local, state and federal regulations.
CONSIDERING SPECIFYING ALBI CLAD 800
Is there a project nearby where we can see an actual application?
Very likely. Over the years we have covered many millions of square feet of steel with Albi Clad 800. In the first section of this binder there is a list of hundreds of representative projects around the country where Albi products have been used. In addition, your regional sales manager will know of others.
We are in the process of doing a feasibility study. How can we estimate budget costs for Albi Clad 800?
Albi produces a chart of installed budget costs. You can download a copy from our website, request one from your regional sales manager, or find one in the Albi binder for specifiers.
Where can I get further information about specific questions I have regarding Albi Clad 800?
Contact one of our sales representatives (listed on the next two pages) for answers to your specific questions. Quite a bit of printed information is available on our website www.albi.com including brochures, product data sheets, estimating and budget information, application guides, and long form specifications which you can download in PDF format.
Albi Clad 800
Installation
Albi Manufacturing recommends that installation be performed with the use of a pneumatic pump designed for application of heavy-duty, viscous materials and a heavy-duty, mastic spray gun. Compressor shall provide at least 80 CFM (2.3 m3/min.) of air at 100 PSI (7 kg/cm2). Material hose must be 3/4” (19.1 mm) I.D. Nylon or other corrosive resistant type suitable for strong solvents. Gun shall have minimum 3/4” (19.1 mm) material inlet and 3/8” (9.5mm) air inlet ports. Final wet film thickness application must conform to manufacturer’s listed design or to recommendations for specified rating. All surfaces shall be rolled prior to drying of surface film in order to remove unsightly drippings or surface irregularity. Small patchwork or damaged areas may be hand-troweled or gloved. When hand troweling, tools must be kept wet with Albi Clad solvent in order to avoid sticking.
Thickness Of Application
Albi Clad 800 shall be applied to the thickness required in accordance with the acceptable test data. Thickness shall be measured on the basis of wet film thickness taken by frequent random probe measurements during application. Although test data measurements are taken on dry film thickness, supervision of application must be undertaken while material is being installed, since final, cured, dry film thickness will reflect shrinkage due to evaporation of occluded solvents.
Sample Application
Before proceeding with the work, the applicator shall apply a section of approximately 100 sq. ft. (9.3 sq. meters) area. This section shall be witnessed by architect’s or owner’s representative and shall be subject to their approval to be used as guide for texture and thickness of the finished work.
Cleanup
Work area shall be maintained in an orderly condition with good housekeeping conditions prevailing. Upon completion of installation, all debris shall be cleared and removed from jobsite.
Albi Clad TF: Fire Rated Intumescent Paint- Techmat Supply
Water Based Thin-Film Intumescent Coating (Paint)
White. 5 Gallon
Can be used as ASTM E-199/UL 263 Fire Resistant Intumescent Coating or ASTM E-84 Class”A” Fire Retardant Fireproofing.
Up to 3 hours Fire Rating. UL Certified. Cost effective solution to help existing and new building construction meet and exceed fire rating code requirements. Decorative aesthetic architectural finish. Compatible with most non-solvent based topcoats.
RELATED PRODUCTS
Albi Intumescent Coatings – Albi produces intumescent fire retardant coatings
Pacific Southwest Coatings and PPG Protective and Marine Coatings have partnered with Albi Clad, the well-respected manufacturer of intumescent coatings for interior and exterior commercial architectural structures as well as chemical process, petrochemical and heavy industrial applications for protection of structures against fire damage. Intumescent coatings from Albi Clad form a protective insulative barrier around steel structures when exposed to heat in order to protect the structural steel from deformation for a prescribed time during exposure to heat and fire.
Albi Clad TF fireproofing is a water-based, thin-film, intumescent coating that represents an aesthetic breakthrough in fire protection for exposed structural steel. It is a unique combination of intumescent fire protection and an attractive, decorative interior finish. Albi Clad TF is used in commercial buildings where architectural designs call for an extremely thin, aesthetic architectural finish with simultaneous fire protection for concrete or steel columns & beams.
Ideal Applications:
HSS columns
Trusses
Structural steel beams
Exposed steel in atriums
Fire escape stairways
Albi Clad 800 is a solvent based intumescent mastic coating applied to structural steel, concrete and other construction materials for exterior applications. It is UL classified for up to three hours of protection. Albi Clad 800 should be specified wherever long-lasting, exterior fireproofing is needed.
Ideal Applications:
Oil refineries
Chemical process facilities
Manufacturing facilities
Heavy industrial applications
Exterior structural steel
Fire Retardant Coatings2
800 UL Listings
800 UL 1709 Listings
800 Product Data Sheet
800 Product Brochure
800 Long Form Spec Data Sheet
800 Application Guide
TF UL Listings
TF Product Data Guide
TF FAQs
TF Application Guide
키워드에 대한 정보 albi clad 800
다음은 Bing에서 albi clad 800 주제에 대한 검색 결과입니다. 필요한 경우 더 읽을 수 있습니다.
이 기사는 인터넷의 다양한 출처에서 편집되었습니다. 이 기사가 유용했기를 바랍니다. 이 기사가 유용하다고 생각되면 공유하십시오. 매우 감사합니다!
사람들이 주제에 대해 자주 검색하는 키워드 ALBI Clad 800 – (1-3 hrs Intumescent Fireproofing material)
- 동영상
- 공유
- 카메라폰
- 동영상폰
- 무료
- 올리기
ALBI #Clad #800 #- #(1-3 #hrs #Intumescent #Fireproofing #material)
YouTube에서 albi clad 800 주제의 다른 동영상 보기
주제에 대한 기사를 시청해 주셔서 감사합니다 ALBI Clad 800 – (1-3 hrs Intumescent Fireproofing material) | albi clad 800, 이 기사가 유용하다고 생각되면 공유하십시오, 매우 감사합니다.
