당신은 주제를 찾고 있습니까 “금속 3d 프린팅 – 금속 3D 프린터 방식과 사용 산업 시장 – Cubicon SLM Metal 3D printer“? 다음 카테고리의 웹사이트 Chewathai27.com/you 에서 귀하의 모든 질문에 답변해 드립니다: Chewathai27.com/you/blog. 바로 아래에서 답을 찾을 수 있습니다. 작성자 메이커 다은쌤 이(가) 작성한 기사에는 조회수 5,252회 및 934191 Like 개의 좋아요가 있습니다.
금속 3d 프린팅 주제에 대한 동영상 보기
여기에서 이 주제에 대한 비디오를 시청하십시오. 주의 깊게 살펴보고 읽고 있는 내용에 대한 피드백을 제공하세요!
d여기에서 금속 3D 프린터 방식과 사용 산업 시장 – Cubicon SLM Metal 3D printer – 금속 3d 프린팅 주제에 대한 세부정보를 참조하세요
*** 아래 질문의 댓글달고 필라멘트 받아가세요~ 고정 댓글의 이벤트 확인하기!! ***
질문1) 내가 생각하는 미래에 필요한 or 나올법한 3D프린팅 분야는 어디인가요?
큐비콘이 개발중인 SLM 금속 3D 프린터를 살짝 공개합니다. SLM (Selective Laser Melting)은 금속 가루를 레이저로 녹여 붙이는 방식의 프린터로, 다른 금속 프린터의 DED (Directed Energy Deposition) 방식 보다는 작고 정밀한 모델을 출력합니다. 특히 큐비콘이 개발중인 SLM은 난삭재인 티타늄을 가공할 수 있습니다.
금속 프린터는 기계 부품 산업 (자동차), 우주 산업 (다품종 소량 부품 사용 산업), 의료 (인공 뼈, 수술 도구) 등의 분야에서 연구 활용되고 있습니다.
큐비콘 홈페이지 : http://www.3dcubicon.com/
큐비콘 유튜브 : https://url.kr/8huoap
문의 : [email protected]
#금속3D프린터 #SLM #큐비콘
—————
참고 영상 \u0026 사이트
DED 방식 프린터: https://youtu.be/oL7bMhPTtDI
출력물 표면 연마: https://youtu.be/2ku-jvlsQY4
기어 사이트: https://www.cgtrader.com/free-3d-models/gear
자동차 3D모델 사이트: https://www.turbosquid.com/3d-model/car
금속 3d 프린팅 주제에 대한 자세한 내용은 여기를 참조하세요.
금속 3D 프린팅의 원리
DMP는 강력한 3D 프린팅 기술로 금속 파우더를 레이어 단위로 녹여 원하는 모든 형태의 금속 부품 지오메트리를 형성합니다. 이 기술은 여러 단계를 통해 재료를 제거 …
Source: ko.3dsystems.com
Date Published: 5/18/2021
View: 717
더 빠르고 저렴한 금속3D프린팅 기술이 개발됐다 – Sciencetimes
한국생산기술연구원(이하 생기원)이 금속 3D프린팅 분야에 최신 용접기술을 접목하여 중대형 부품 또는 다이캐스팅(Die-casting)* 금형을 보다 신속하고 …
Source: www.sciencetimes.co.kr
Date Published: 6/27/2021
View: 9470
금속 3D 프린팅의 소개
메탈 3D프린팅은 기존의 금속 가공 방식을 탈피하여 시도해 보지 못했던 금속 부품들을 3D 소프트웨어들을 활용하여 경량화, 다품종 소량 생산, 생산 및 연구가 가능합니다 …
Source: hdcinfo.co.kr
Date Published: 8/16/2021
View: 7810
금속 3D 프린터 – 씨이피테크
DMP는 금속 분말을 층별로 녹여 원하는 금속 부품 형상을 형성하는 강력한 3D 프린팅 기술입니다. 이 기술은 재료를 여러 단계에서 제거하는 대신 레이어로 쌓는 데 …
Source: www.ceptech.co.kr
Date Published: 10/16/2022
View: 6723
금속 3D 프린팅 – 프로메테우스
DMLS 3D프린팅 기술을 사용하여 마운팅, 패스너 및 단면 부품과 같은 여러 구성 부품들을 하나의 파트로 통합하여 단일의 견고한 금속 부품을 제작할 수 있습니다. 이러한 …
Source: promet.co.kr
Date Published: 7/7/2022
View: 3212
금속 3D프린팅 기술 및 국내 산업 활성화 방안
3D프린팅 기술은 layer-by-layer 방식으로 소재를 결합해 3차원의 형상을 만들 수 있는 장점을 지니고 있다.
Source: www.materialssquare.com
Date Published: 10/17/2022
View: 7940
금속 3D 프린팅 솔루션 | 프로토텍
프로토텍은 세계 시장점유율 1위 Stratasys 3D 프린터 및 3D 스캐너 판매, 시제품 제작 및 역설계 서비스를 통한 3D 프린팅 토탈 솔루션을 제공합니다.
Source: www.prototech.co.kr:40007
Date Published: 8/7/2022
View: 9224
[보고서]금속3D 프린팅용 분말소재 기반기술 개발 – ScienceON
합금설계 및 3D 프린팅용 금속분말 제조 기술 개발- Fe계 및 Ni계 신합금 제조 기술 및 후처리를 통한 유동성 향상 기술 확보(평균입도 30 μm, Hall flow 26 sec/50 g …
Source: scienceon.kisti.re.kr
Date Published: 8/6/2022
View: 4768
주제와 관련된 이미지 금속 3d 프린팅
주제와 관련된 더 많은 사진을 참조하십시오 금속 3D 프린터 방식과 사용 산업 시장 – Cubicon SLM Metal 3D printer. 댓글에서 더 많은 관련 이미지를 보거나 필요한 경우 더 많은 관련 기사를 볼 수 있습니다.
주제에 대한 기사 평가 금속 3d 프린팅
- Author: 메이커 다은쌤
- Views: 조회수 5,252회
- Likes: 934191 Like
- Date Published: 2022. 6. 14.
- Video Url link: https://www.youtube.com/watch?v=uMKH1xrd-As
금속 3D 프린팅(DMLS) 개요
DMP는 강력한 3D 프린팅 기술로 금속 파우더를 레이어 단위로 녹여 원하는 모든 형태의 금속 부품 지오메트리를 형성합니다. 이 기술은 여러 단계를 통해 재료를 제거하는 대신 재료를 여러 층으로 쌓아야 할 때 적용됩니다. 레이저를 이용해 금속 파우더 입자를 빠르고 정확하게 배치하고 완전히 녹이기 때문에, 접착제나 액체 접착제를 쓰지 않고도 새 재료를 이전 레이어에 올바르게 부착할 수 있습니다. 고강도 에너지를 이용하는 강력한 광섬유 레이저가 장비 내부의 불활성 영역에서 작동합니다. 따라서 구축되는 금속 부품은 밀도 높고 균일한 재료 구조를 보이게 됩니다. 부품을 CAD로 설계하면 프로그래밍, 클램핑이나 공구 세공을 사용하지 않고 바로 DMP 생산 장치를 구동할 수 있습니다.
DMP는 항공우주 및 방위 분야에 이상적인 기술입니다. 이 기술을 이용하면 공구 세공 없이도 작고 대단히 복잡한 형상을 생산할 수 있고, 기계 가공과 스탬핑 또는 다이 주조 같은 일반적인 공정과는 완전히 다른 부품을 설계할 수 있습니다.
금속 3D 프린팅｜프로메테우스
정밀도
원재료는 정밀 주조 부품에 필적하는 표면 처리가 되어 있지만, 최종 마무리 부품을 성공적으로 생산하려면 전문가 마무리 작업이 중요합니다.
이것은 많은 기업들이 사내에 3D 출력 작업을 실행할 수 없는 이유 중 일부입니다. 하지만 프로메테우스는 필요한 리소스와 경험을 갖추고 있습니다. 우리는 미디어 블라스팅, 전기 도금, 연마 및 CNC 가공과 같은 다양한 전문 후처리 옵션을 제공합니다. 부품은 기계적 특성을 최대화하기 위해 열처리될 수 있습니다.
금속 3D프린팅 기술 및 국내 산업 활성화 방안
Materials Square Customer Agreement
This Materials Square Customer Agreement (this “Agreement”) contains the terms and conditions that govern your access to and use of the “Materials Square” Service Offerings (as defined below) and is an agreement between Virtual Lab, Inc. (“Virtual Lab,” “we,” “us,” or “our”) and you or the entity you represent (“you” or “your”). This Agreement takes effect when you click an “Sign In” button or, if earlier, when you use any of the Service Offerings (the “Effective Date”). You represent to us that you are lawfully able to enter into contracts (e.g., you are not a minor). If you are entering into this Agreement for an entity, such as the company you work for, you represent to us that you have legal authority to bind that entity.
1. Use of the Service Offerings.
1.1 Generally.You may access and use the Service Offerings in accordance with this Agreement. Service Terms apply to certain Service Offerings. You will comply with the terms of this Agreement and all laws, rules and regulations applicable to your use of the Service Offerings.
1.2 Your Account.To access the Services, you must have an “Materials Square” account associated with a valid email address and a valid form of payment. Unless explicitly permitted by the Service Terms, you will only create one account per email address.
1.3 Third-Party Content.Third-Party Content may be used by you at your election. Third-Party Content is governed by this Agreement and, if applicable, separate terms and conditions accompanying such Third-Party Content, which terms and conditions may include separate fees and charges.
2. Changes.
2.1 To the Service Offerings. We may change or discontinue any or all of the Service Offerings or change or remove functionality of any or all of the Service Offerings from time to time. We will notify you of any material change to or discontinuation of the Service Offerings.
3. Security and Data Privacy.
3.1 Security. Without limiting Section 10 or your obligations under Section 4.2, we will implement reasonable and appropriate measures designed to help you secure Your Content against accidental or unlawful loss, access or disclosure.
3.2 Data Privacy. You consent to the storage of Your Content in, and transfer of Your Content into, the “Amazon Web Services” Server in which we have an account(“Materials Square Storage”). We will not access or use Your Content except as necessary to maintain or provide the Service Offerings, or as necessary to comply with the law or a binding order of a governmental body. We will not (a) disclose Your Content to any government or third party or (b) subject to Section 3.3, move Your Content from the “Materials Square Storage”; except in each case as necessary to comply with the law or a binding order of a governmental body. Unless it would violate the law or a binding order of a governmental body, we will give you notice of any legal requirement or order referred to in this Section 3.2. We will only use your Account Information in accordance with the Privacy Policy, and you consent to such usage. The Privacy Policy does not apply to Your Content.
3.3 Service Attributes. To provide billing and administration services, we may process Service Attributes in the Virtual Lab. To provide you with support services initiated by you and investigate fraud, abuse or violations of this Agreement, we may process Service Attributes where we maintain our support and investigation personnel.
4. Your Responsibilities.
4.1 Your Accounts.Except to the extent caused by our breach of this Agreement, (a) you are responsible for all activities that occur under your account, regardless of whether the activities are authorized by you or undertaken by you, your employees or a third party (including your contractors, agents or End Users), and (b) we and our affiliates are not responsible for unauthorized access to your account.
4.2 Your Content. You will ensure that Your Content, Your Submissions and Your and End Users’ use of Your Content, Your Submissions or the Service Offerings will not violate any of the Policies or any applicable law. You are solely responsible for the development, content, operation, maintenance, and use of Your Content and Your Submissions.
4.3 Your Security and Backup. You are responsible for properly configuring and using the Service Offerings and otherwise taking appropriate action to secure, protect and backup your accounts and Your Content in a manner that will provide appropriate security and protection, which might include use of encryption to protect Your Content from unauthorized access and routinely archiving Your Content.
4.4 Log-In Credentials and Account Keys. “Materials Square” log-in credentials and private keys generated by the Services are for your internal use only and you will not sell, transfer or sublicense them to any other entity or person, except that you may disclose your private key to your agents and subcontractors performing work on your behalf.
5. Fees and Payment.
5.1 Service Fees. We calculate and bill fees and charges hourly. We may bill you more frequently for fees accrued if we suspect that your account is fraudulent or at risk of non-payment. You will pay us the applicable fees and charges for use of the Service Offerings as using one of the payment methods we support. All amounts payable by you under this Agreement will be paid to us without setoff or counterclaim, and without any deduction or withholding. Fees and charges for any new Service or new feature of a Service will be effective when we post updated fees and charges on the “Materials Square” Site, unless we expressly state otherwise in a notice. We may increase or add new fees and charges for any existing Services you are using by giving you at least 15 days’ prior notice. We may elect to charge you interest at the rate of 1.5% per month (or the highest rate permitted by law, if less) on all late payments.
5.2 Taxes. Each party will be responsible, as required under applicable law, for identifying and paying all taxes and other governmental fees and charges (and any penalties, interest, and other additions thereto) that are imposed on that party upon or with respect to the transactions and payments under this Agreement. All fees payable by you are exclusive of Indirect Taxes. We may charge and you will pay applicable Indirect Taxes that we are legally obligated or authorized to collect from you. You will provide such information to us as reasonably required to determine whether we are obligated to collect Indirect Taxes from you. We will not collect, and you will not pay, any Indirect Tax for which you furnish us a properly completed exemption certificate or a direct payment permit certificate for which we may claim an available exemption from such Indirect Tax. All payments made by you to us under this Agreement will be made free and clear of any deduction or withholding, as may be required by law. If any such deduction or withholding (including but not limited to cross-border withholding taxes) is required on any payment, you will pay such additional amounts as are necessary so that the net amount received by us is equal to the amount then due and payable under this Agreement. We will provide you with such tax forms as are reasonably requested in order to reduce or eliminate the amount of any withholding or deduction for taxes in respect of payments made under this Agreement.
6. Temporary Suspension.
6.1 Generally. We may suspend your or any End User’s right to access or use any portion or all of the Service Offerings immediately upon notice to you if we determine:
(a) your or an End User’s use of the Service Offerings (i) poses a security risk to the Service Offerings or any third party, (ii) could adversely impact our systems, the Service Offerings or the systems or Content of any other “Materials Square” customer, (iii) could subject us, our affiliates, or any third party to liability, or (iv) could be fraudulent;
(b) you are, or any End User is, in breach of this Agreement;
(c) you are in breach of your payment obligations under Section 5; or
(d) you have ceased to operate in the ordinary course, made an assignment for the benefit of creditors or similar disposition of your assets, or become the subject of any bankruptcy, reorganization, liquidation, dissolution or similar proceeding.
6.2 Effect of Suspension. If we suspend your right to access or use any portion or all of the Service Offerings. You remain responsible for all fees and charges you incur during the period of suspension.
7. Term; Termination.
7.1 Term. The term of this Agreement will commence on the Effective Date and will remain in effect until terminated under this Section 7. Any notice of termination of this Agreement by either party to the other must include a Termination Date that complies with the notice periods in Section 7.2.
7.2 Termination.
(a) Termination for Convenience. You may terminate this Agreement for any reason by providing us notice and closing your account for all Services for which we provide an account closing mechanism. We may terminate this Agreement for any reason by providing you at least 15 days’ advance notice.
(b) Termination for Cause.
(i) By Either Party. Either party may terminate this Agreement for cause if the other party is in material breach of this Agreement and the material breach remains uncured for a period of 15 days from receipt of notice by the other party. No later than the Termination Date, you will close your account.
(ii) By Us. We may also terminate this Agreement immediately upon notice to you (A) for cause if we have the right to suspend under Section 6, (B) if our relationship with a third-party partner who provides software or other technology we use to provide the Service Offerings expires, terminates or requires us to change the way we provide the software or other technology as part of the Services, or (C) in order to comply with the law or requests of governmental entities.
7.3 Effect of Termination.
(a) Generally. Upon the Termination Date:
(i) except as provided in Section 7.3(b), all your rights under this Agreement immediately terminate;
(ii) you remain responsible for all fees and charges you have incurred through the Termination Date and are responsible for any fees and charges you incur during the post-termination period described in Section 7.3(b);
(iii) you will immediately return or, if instructed by us, destroy all “Materials Square” Content in your possession; and
(iv) Sections 4.1, 5, 7.3, 8 (except the license granted to you in Section 8.4), 9, 10, 11, 13 and 14 will continue to apply in accordance with their terms.
(b) Post-Termination. Unless we terminate your use of the Service Offerings pursuant to Section 7.2(b), during the 15 days following the Termination Date:
(i) we will not take action to remove from the “Materials Square” systems any of Your Content as a result of the termination; and
(ii) we will allow you to retrieve Your Content from the Services only if you have paid all amounts due under this Agreement.
For any use of the Services after the Termination Date, the terms of this Agreement will apply and you will pay the applicable fees at the rates under Section 5.
8. Proprietary Rights.
8.1 Your Content. Except as provided in this Section 8, we obtain no rights under this Agreement from you (or your licensors) to Your Content. You consent to our use of Your Content to provide the Service Offerings to you and any End Users.
8.2 Your Submissions. Your Submissions will be governed by the terms of the Apache License, Version 2.0, unless you request and we consent in writing to another license supported by us.
8.3 Adequate Rights.You represent and warrant to us that: (a) you or your licensors own all right, title, and interest in and to Your Content, Your Submissions and Suggestions; (b) you have all rights in Your Content, Your Submissions and Suggestions necessary to grant the rights contemplated by this Agreement; and (c) none of Your Content, Your Submissions or End Users’ use of Your Content, Your Submissions or the Service Offerings will violate the Acceptable Use Policy.
8.4 Service Offerings License. We or our licensors own all right, title, and interest in and to the Service Offerings, and all related technology and intellectual property rights. Subject to the terms of this Agreement, we grant you a limited, revocable, non-exclusive, non-sublicensable, non-transferrable license to do the following: (a) access and use the Services solely in accordance with this Agreement; and (b) copy and use the “Materials Square” Content solely in connection with your permitted use of the Services. Except as provided in this Section 8.4, you obtain no rights under this Agreement from us, our affiliates or our licensors to the Service Offerings, including any related intellectual property rights. Some “Materials Square” Content and Third-Party Content may be provided to you under a separate license, such as the Apache License, Version 2.0, or other open source license. In the event of a conflict between this Agreement and any separate license, the separate license will prevail with respect to the “Materials Square” Content or Third-Party Content that is the subject of such separate license.
8.5 License Restrictions. Neither you nor any End User will use the Service Offerings in any manner or for any purpose other than as expressly permitted by this Agreement. Neither you nor any End User will, or will attempt to (a) modify, distribute, alter, tamper with, repair, or otherwise create derivative works of any Content included in the Service Offerings (except to the extent Content included in the Service Offerings is provided to you under a separate license that expressly permits the creation of derivative works), (b) reverse engineer, disassemble, or decompile the Service Offerings or apply any other process or procedure to derive the source code of any software included in the Service Offerings (except to the extent applicable law doesn’t allow this restriction), (c) access or use the Service Offerings in a way intended to avoid incurring fees or exceeding usage limits or quotas, or (d) resell or sublicense the Service Offerings. During and after the Term, you will not assert, nor will you authorize, assist, or encourage any third party to assert, any intellectual property infringement claim regarding any Service Offerings you have used. You may only use the “Materials Square” Marks in accordance with the Trademark Use Guidelines. You will not misrepresent or embellish the relationship between us and you (including by expressing or implying that we support, sponsor, endorse, or contribute to you or your business endeavors). You will not imply any relationship or affiliation between us and you except as expressly permitted by this Agreement.
8.6 Suggestions. If you provide any Suggestions to us or our affiliates, we and our affiliates will be entitled to use the Suggestions without restriction. You hereby irrevocably assign to us all right, title, and interest in and to the Suggestions and agree to provide us any assistance we require to document, perfect, and maintain our rights in the Suggestions.
9. Indemnification.
9.1 General.You will defend, indemnify, and hold harmless us, our affiliates and licensors, and each of their respective employees, officers, directors, and representatives from and against any Losses arising out of or relating to any third-party claim concerning: (a) your or any End Users’ use of the Service Offerings (including any activities under your “Materials Square” account and use by your employees and personnel); (b) breach of this Agreement or violation of applicable law by you, End Users, Your Content or Your Submissions; (c) Your Content or Your Submissions or the combination of Your Content or Your Submissions with other applications, content or processes, including any claim involving alleged infringement or misappropriation of third-party rights by Your Content or Your Submissions, or by the use, development, design, production, advertising or marketing of Your Content or Your Submissions; or (d) a dispute between you and any End User. You will reimburse us for reasonable attorneys’ fees, as well as our employees’ and contractors’ time and materials spent responding to any third party subpoena or other compulsory legal order or process associated with third party claims described in (a) through (d) above at our then-current hourly rates.
9.2 Process. We will promptly notify you of any claim subject to Section 9.1, but our failure to promptly notify you will only affect your obligations under Section 9.1 to the extent that our failure prejudices your ability to defend the claim. You may: (a) use counsel of your own choosing (subject to our written consent) to defend against any claim; and (b) settle the claim as you deem appropriate, provided that you obtain our prior written consent before entering into any settlement. We may also assume control of the defense and settlement of the claim at any time.
10. Disclaimers.
THE SERVICE OFFERINGS ARE PROVIDED “AS IS.” EXCEPT TO THE EXTENT PROHIBITED BY LAW, OR TO THE EXTENT ANY STATUTORY RIGHTS APPLY THAT CANNOT BE EXCLUDED, LIMITED OR WAIVED, WE AND OUR AFFILIATES AND LICENSORS (A) MAKE NO REPRESENTATIONS OR WARRANTIES OF ANY KIND, WHETHER EXPRESS, IMPLIED, STATUTORY OR OTHERWISE REGARDING THE SERVICE OFFERINGS OR THE THIRD-PARTY CONTENT, AND (B) DISCLAIM ALL WARRANTIES, INCLUDING ANY IMPLIED OR EXPRESS WARRANTIES (I) OF MERCHANTABILITY, SATISFACTORY QUALITY, FITNESS FOR A PARTICULAR PURPOSE, NON-INFRINGEMENT, OR QUIET ENJOYMENT, (II) ARISING OUT OF ANY COURSE OF DEALING OR USAGE OF TRADE, (III) THAT THE SERVICE OFFERINGS OR THIRD-PARTY CONTENT WILL BE UNINTERRUPTED, ERROR FREE OR FREE OF HARMFUL COMPONENTS, AND (IV) THAT ANY CONTENT WILL BE SECURE OR NOT OTHERWISE LOST OR ALTERED.
11. Limitations of Liability.
WE AND OUR AFFILIATES AND LICENSORS WILL NOT BE LIABLE TO YOU FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, CONSEQUENTIAL OR EXEMPLARY DAMAGES (INCLUDING DAMAGES FOR LOSS OF PROFITS, REVENUES, CUSTOMERS, OPPORTUNITIES, GOODWILL, USE, OR DATA), EVEN IF A PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. FURTHER, NEITHER WE NOR ANY OF OUR AFFILIATES OR LICENSORS WILL BE RESPONSIBLE FOR ANY COMPENSATION, REIMBURSEMENT, OR DAMAGES ARISING IN CONNECTION WITH: (A) YOUR INABILITY TO USE THE SERVICES, INCLUDING AS A RESULT OF ANY (I) TERMINATION OR SUSPENSION OF THIS AGREEMENT OR YOUR USE OF OR ACCESS TO THE SERVICE OFFERINGS, (II) OUR DISCONTINUATION OF ANY OR ALL OF THE SERVICE OFFERINGS, OR, (III) ANY UNANTICIPATED OR UNSCHEDULED DOWNTIME OF ALL OR A PORTION OF THE SERVICES FOR ANY REASON; (B) THE COST OF PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; (C) ANY INVESTMENTS, EXPENDITURES, OR COMMITMENTS BY YOU IN CONNECTION WITH THIS AGREEMENT OR YOUR USE OF OR ACCESS TO THE SERVICE OFFERINGS; OR (D) ANY UNAUTHORIZED ACCESS TO, ALTERATION OF, OR THE DELETION, DESTRUCTION, DAMAGE, LOSS OR FAILURE TO STORE ANY OF YOUR CONTENT OR OTHER DATA. IN ANY CASE, OUR AND OUR AFFILIATES’ AND LICENSORS’ AGGREGATE LIABILITY UNDER THIS AGREEMENT WILL NOT EXCEED THE AMOUNT YOU ACTUALLY PAY US UNDER THIS AGREEMENT FOR THE SERVICE THAT GAVE RISE TO THE CLAIM DURING THE 12 MONTHS BEFORE THE LIABILITY AROSE.
12. Modifications to the Agreement.
We may modify this Agreement (including any Policies) at any time by posting a revised version on the “Materials Square” Site or by otherwise notifying you in accordance with Section 13.10; provided. By continuing to use the Service Offerings after the effective date of any modifications to this Agreement, you agree to be bound by the modified terms. It is your responsibility to check the “Materials Square” Site regularly for modifications to this Agreement. We last modified this Agreement on the date listed at the end of this Agreement.
13. Miscellaneous.
13.1 Assignment. You will not assign or otherwise transfer this Agreement or any of your rights and obligations under this Agreement, without our prior written consent. Any assignment or transfer in violation of this Section 13.1 will be void. Subject to the foregoing, this Agreement will be binding upon, and inure to the benefit of the parties and their respective permitted successors and assigns.
13.2 Entire Agreement.This Agreement incorporates the Policies by reference and is the entire agreement between you and us regarding the subject matter of this Agreement. This Agreement supersedes all prior or contemporaneous representations, understandings, agreements, or communications between you and us, whether written or verbal, regarding the subject matter of this. We will not be bound by, and specifically object to, any term, condition or other provision that is different from or in addition to the provisions of this Agreement (whether or not it would materially alter this Agreement) including for example, any term, condition or other provision (a) submitted by you in any order, receipt, acceptance, confirmation, correspondence or other document, (b) related to any online registration, response to any Request for Bid, Request for Proposal, Request for Information, or other questionnaire, or (c) related to any invoicing process that you submit or require us to complete. If the terms of this document are inconsistent with the terms contained in any Policy, the terms contained in this document will control, except that the Service Terms will control over this document.
13.3 Force Majeure.We and our affiliates will not be liable for any delay or failure to perform any obligation under this Agreement where the delay or failure results from any cause beyond our reasonable control, including acts of God, labor disputes or other industrial disturbances, electrical or power outages, utilities or other telecommunications failures, earthquake, storms or other elements of nature, blockages, embargoes, riots, acts or orders of government, acts of terrorism, or war.
13.4 Governing Law. The laws of Rebublic of Korea, without reference to conflict of law rules, govern this Agreement and any dispute of any sort that might arise between you and us. The United Nations Convention for the International Sale of Goods does not apply to this Agreement.
13.5 Disputes. Any dispute or claim relating in any way to your use of the Service Offerings, or to any products or services sold or distributed by Virtual Lab will be resolved in Seoul Central District court of Rebublic of Korea. We and you agree that any dispute resolution proceedings will be conducted only on an individual basis and not in a class, consolidated or representative action. Subject to Section 8.5, we and you both agree that you or we may bring suit in court to enjoin infringement or other misuse of intellectual property rights.
13.6 Trade Compliance.In connection with this Agreement, each party will comply with all applicable import, re-import, sanctions, anti-boycott, export, and re-export control laws and regulations, including all such laws and regulations that apply to a company of Rebulic of Korea.
13.7 Independent Contractors; Non-Exclusive Rights. We and you are independent contractors, and this Agreement will not be construed to create a partnership, joint venture, agency, or employment relationship. Neither party, nor any of their respective affiliates, is an agent of the other for any purpose or has the authority to bind the other. Both parties reserve the right (a) to develop or have developed for it products, services, concepts, systems, or techniques that are similar to or compete with the products, services, concepts, systems, or techniques developed or contemplated by the other party, and (b) to assist third party developers or systems integrators who may offer products or services which compete with the other party’s products or services.
13.8 Language.All communications and notices made or given pursuant to this Agreement must be in the English language. If we provide a translation of the English language version of this Agreement, the English language version of the Agreement will control if there is any conflict.
13.9 Confidentiality and Publicity. You may use “Materials Square” Confidential Information only in connection with your use of the Service Offerings as permitted under this Agreement. You will not disclose “Materials Square” Confidential Information during the Term or at any time during the 5-year period following the end of the Term. You will take all reasonable measures to avoid disclosure, dissemination or unauthorized use of “Materials Square” Confidential Information, including, at a minimum, those measures you take to protect your own confidential information of a similar nature. You will not issue any press release or make any other public communication with respect to this Agreement or your use of the Service Offerings.
13.10 Notice.
(a) To You. We may provide any notice to you under this Agreement by: (i) posting a notice on the “Materials Square” Site; or (ii) sending a message to the email address then associated with your account. Notices we provide by posting on the “Materials Square” Site will be effective upon posting and notices we provide by email will be effective when we send the email. It is your responsibility to keep your email address current. You will be deemed to have received any email sent to the email address then associated with your account when we send the email, whether or not you actually receive the email.
(b) To Us. To give us notice under this Agreement, you must contact Virtual Lab as follows: (i) by telephone to +82-2-3293-0204 ; or (ii) by personal delivery, overnight courier or registered or certified mail to Virtual Lap, Inc., (02792) 961c H-1, Hwarang-ro 14-gil, Seongbuk-gu, Seoul, Rebulic of Korea. We may update the telephone number or address for notices to us by posting a notice on the “Materials Square” Site. Notices provided by personal delivery will be effective immediately. Notices provided by facsimile transmission or overnight courier will be effective one business day after they are sent. Notices provided registered or certified mail will be effective three business days after they are sent.
13.11 No Third-Party Beneficiaries. Except as set forth in Section 9.1, this Agreement does not create any third-party beneficiary rights in any individual or entity that is not a party to this Agreement.
13.12 Government of Republic of Korea Rights. The Service Offerings are provided to the Government of Republic of Korea as “commercial items,” “commercial computer software,” “commercial computer software documentation,” and “technical data” with the same rights and restrictions generally applicable to the Service Offerings. If you are using the Service Offerings on behalf of the Government of Republic of Korea and these terms fail to meet the needs of the Government of Republic of Korea or are inconsistent in any respect with the law of Republic of Korea, you will immediately discontinue your use of the Service Offerings.
13.13 No Waivers. The failure by us to enforce any provision of this Agreement will not constitute a present or future waiver of such provision nor limit our right to enforce such provision at a later time. All waivers by us must be in writing to be effective.
13.14 Severability. If any portion of this Agreement is held to be invalid or unenforceable, the remaining portions of this Agreement will remain in full force and effect. Any invalid or unenforceable portions will be interpreted to effect and intent of the original portion. If such construction is not possible, the invalid or unenforceable portion will be severed from this Agreement but the rest of the Agreement will remain in full force and effect.
14. Definitions.
“Account Information” includes names, usernames, phone numbers, email addresses and billing information associated with your “Materials Square” account.
“API” means an application program interface.
“Materials Square Confidential Information” means all nonpublic information disclosed by us, our affiliates, business partners or our or their respective employees, contractors or agents that is designated as confidential or that, given the nature of the information or circumstances surrounding its disclosure, reasonably should be understood to be confidential. “Materials Square” Confidential Information includes: (a) nonpublic information relating to our or our affiliates or business partners’ technology, customers, business plans, promotional and marketing activities, finances and other business affairs; (b) third-party information that we are obligated to keep confidential; and (c) the nature, content and existence of any discussions or negotiations between you and us or our affiliates. “Materials Square” Confidential Information does not include any information that: (i) is or becomes publicly available without breach of this Agreement; (ii) can be shown by documentation to have been known to you at the time of your receipt from us; (iii) is received from a third party who did not acquire or disclose the same by a wrongful or tortious act; or (iv) can be shown by documentation to have been independently developed by you without reference to the “Materials Square” Confidential Information.
“Materials Square Content”means Content we or any of our affiliates make available in connection with the Services or on the “Materials Square” Site to allow access to and use of the Services, including APIs; WSDLs; Documentation; sample code; software libraries; command line tools; proofs of concept; templates; and other related technology (including any of the foregoing that are provided by our personnel). “Materials Square” Content does not include the Services or Third-Party Content.
“Materials Square Marks” means any trademarks, service marks, service or trade names, logos, and other designations of “Materials Square” and its affiliates that we may make available to you in connection with this Agreement.
“Materials Square Site” means https://www.materialssquare.com (and any successor or related site designated by us), as may be updated by us from time to time.
“Content” means software (including machine images), data, text, audio, video or images.
“Documentation” means the user guides and admin guides (in each case exclusive of content referenced via hyperlink) for the Services located at https://docs.materialssquare.com (and any successor or related locations designated by us), as such user guides and admin guides may be updated by Virtual Lab from time to time.
“Indirect Taxes”means applicable taxes and duties, including, without limitation, VAT, Service Tax, GST, excise taxes, sales and transactions taxes, and gross receipts tax.
“Losses” means any claims, damages, losses, liabilities, costs, and expenses (including reasonable attorneys’ fees).
“Policies” means the Acceptable Use Policy, Privacy Policy, the Site Terms, the Service Terms, the Trademark Use Guidelines, all restrictions described in the “Materials Square” Content and on the “Materials Square” Site, and any other policy or terms referenced in or incorporated into this Agreement, but does not include whitepapers or other marketing materials referenced on the “Materials Square” Site.
“Privacy Policy”means the privacy policy located at http://www.materialssquare.com/privacy (and any successor or related locations designated by us), as it may be updated by us from time to time.
“Service” means each of the services made available by us or our affiliates, including those web services described in the Service Terms. Services do not include Third-Party Content.
“Service Attributes” means Service usage data related to your account, such as resource identifiers, metadata tags, security and access roles, rules, usage policies, permissions, usage statistics and analytics.
“Service Offerings”means the Services (including associated APIs), the “Materials Square” Content, the “Materials Square” Marks, and any other product or service provided by us under this Agreement. Service Offerings do not include Third-Party Content.
“Suggestions”means all suggested improvements to the Service Offerings that you provide to us.
“Term” means the term of this Agreement described in Section 7.1.
“Termination Date” means the effective date of termination provided in accordance with Section 7, in a notice from one party to the other.
“Third-Party Content” means Content made available to you by any third party on the “Materials Square” Site or in conjunction with the Services.
“Your Content” means Content that you or any End User transfers to us for processing, storage or hosting by the Services in connection with your “Materials Square” account and any computational results that you or any End User derive from the foregoing through their use of the Services.
“Your Submissions” means Content that you post or otherwise submit to developer forums, sample code repositories, public data repositories, or similar community-focused areas of the “Materials Square” Site, or any other part of the “Materials Square” Site that allows third parties to make available software, products or data.
Enforced May 8, 2017
금속 3D 프린팅 솔루션
1. 사용 및 조작이 용이
최신 머신 샵을 염두에 두고 설계된 샵 시스템은 워크 플로우에 완벽하게 맞도록 제작되었습니다.
적은 비용으로 레이저 기반 시스템에 비해 표면 조도 및 해상도가 우수한 금속 부품을 생산합니다.
1) 합리적인 가격의 솔루션
본 시스템에는 3D프린팅에서 소결에 이르기까지 작업장에서 바인더 분사를 시작하는 데 필요한 모든 장비가 포함됩니다. 또한 다양한 빌드 볼륨 구성 (4L, 8L, 12L 및 16L)을 갖춘 Shop System은 매장의 처리량에 맞게 다양한 솔루션으로 설계되었습니다.
2) 단순화 된 후처리
Shop System에서 제작된 부품은 파우더 베드에서 완전히 지지되며 손으로 제거 가능한 소결 세터가 있습니다. 레이저 기반 시스템에 일반적인 지지 구조물에서 필수적인 후가공 과정을 피하고 대신 퍼니스에서 바로 고객이 원하는 형상의 부품을 얻을 수 있습니다.
3) 최적화 된 파우더 및 파라미터
턴키, 엔드 투 엔드 솔루션으로 빠르게 시작하십시오. Shop System은 탁월한 부품 품질을 제공하고 부품 간 반복성을 보장하도록 최적화 된 데스크탑 금속 가공 분말 및 가공 매개 변수를 갖추고 있습니다.
2. 탁월한 생산성
보장된 품질, 표면 조도 및 공차를 사용하여 최종 금속 부품을 손쉽게 제작하십시오.
1) 10배 빠른 속도
고속 단일 패스 프린팅 엔진을 갖춘 Shop System은 레이저 파우더 베드 기술보다 최대 10 배 빠른 고품질 금속 부품을 하루에 70kg 생산합니다.
2) 교대당 빌드 인쇄
6~12 시간의 평균주기 시간으로 교대 할 때마다 새로운 빌드가 가능합니다. 매일 수십에서 수백 개의 니어 넷 모양 부품을 인쇄합니다.
3) 유연한 배치작업
Shop System은 툴링없는 제조 공정입니다. 버튼 하나만 누르면 새 작업으로 전환하고 사용자 지정 설정 없이 여러 복잡한 작업을 처리 할 수 ??있습니다.
3. 우수한 인쇄 품질
매우 정교한 기능으로 준비된 고해상도 부품을 프린팅하십시오. 퍼니스에서 최소 4µm Ra의 표면 조도를 달성하고 마무리로 0.1µm Ra 미만의 표면 조도를 달성하십시오. Shop System은 완전히 조밀하고 단단한 부품을 생산하며, 디 바인드 또는 충전재가 필요하지 않습니다.
1) 고해상도 프린팅
Shop System은 시장에서 가장 높은 해상도의 단일 패스 바인더 분사 시스템을 갖추고 있습니다. Shop System은 1600×1600 DPI 기본 (비교 가능한 시스템보다 33 % 높은 해상도) 및 초당 670M 이상의 드롭을 분사하여 고속의 고해상도 프린팅을 합니다.
2) 뛰어난 미세형상 구현능력
사용자는 프린팅 속도를 위해 미세형상이나 해상도를 포기할 필요 없습니다. Shop System은 최소 1pL(pico liter) 부터 최대 6pL 크기로 바인더 방울 크기를 조정 및 혼합하여 우수한 표면 마감이 가능합니다.
3) 5배 프린팅 중복
총 70,000 개 이상의 노즐로 구성된 Shop System의 프린트 헤드는 다른 시스템보다 25 % 높은 노즐 여분을 제공하여 프린팅 품질과 안정성을 향상시킵니다.
[보고서]금속3D 프린팅용 분말소재 기반기술 개발
초록
▼
■ 합금설계 및 3D 프린팅용 금속분말 제조 기술 개발
– Fe계 및 Ni계 신합금 제조 기술 및 후처리를 통한 유동성 향상 기술 확보
(평균입도 30 μm, Hall flow 26 sec/50 g 이하)
■ 3D 프…
■ 합금설계 및 3D 프린팅용 금속분말 제조 기술 개발
– Fe계 및 Ni계 신합금 제조 기술 및 후처리를 통한 유동성 향상 기술 확보
(평균입도 30 μm, Hall flow 26 sec/50 g 이하)
■ 3D 프린팅용 인프라 구축
– DED장비 발주 완료 및 입고 대기 중
– PBF장비 방폭 개조 및 분말특성 평가장비 구축 완료
■ Fe계 금형강의 3D 프린팅 공정 database 구축 및 고밀도 적층 기술 개발
– 3D 프린팅을 이용한 고밀도 시험편 제작 및 기계적 특성 평가
(경도 57 HRC, 충격인성 3.2 J/cm2)
■ Ni계 초내열 합금의 3D 프린팅 공정 database 구축 및 고밀도 적층 기술 개발
– 3D 프린팅을 이용한 고밀도 시험편 제작 및 고온 인장강도 평가
(1293 MPa at 650 ℃)
■ Ti계 합금의 3D 프린팅 공정 database 구축 및 고밀도 적층 기술 개발
– 3D 프린팅을 이용한 고밀도 시험편 제작 완료 (상대밀도 99.9 % 이상)
■ 레이저를 이용한 세라믹 구조물의 선택적 열처리
– 세라믹 구조물의 레이저 열처리에 의한 결정립 성장 거동 분석 완료 (200 % 이상)
키워드에 대한 정보 금속 3d 프린팅
다음은 Bing에서 금속 3d 프린팅 주제에 대한 검색 결과입니다. 필요한 경우 더 읽을 수 있습니다.
이 기사는 인터넷의 다양한 출처에서 편집되었습니다. 이 기사가 유용했기를 바랍니다. 이 기사가 유용하다고 생각되면 공유하십시오. 매우 감사합니다!
사람들이 주제에 대해 자주 검색하는 키워드 금속 3D 프린터 방식과 사용 산업 시장 – Cubicon SLM Metal 3D printer
- 메이커
- 큐비콘
- 3D
- 프린팅
- 프린터
- SLA
- 메탈
- cubicon
- fdm
- slm
- metal
- 기술
- 미래
- 산업
- ded
- laser
- 레이저
- 기계
- 티타늄
금속 #3D #프린터 #방식과 #사용 #산업 #시장 #- #Cubicon #SLM #Metal #3D #printer
YouTube에서 금속 3d 프린팅 주제의 다른 동영상 보기
주제에 대한 기사를 시청해 주셔서 감사합니다 금속 3D 프린터 방식과 사용 산업 시장 – Cubicon SLM Metal 3D printer | 금속 3d 프린팅, 이 기사가 유용하다고 생각되면 공유하십시오, 매우 감사합니다.
