Top 28 How Long Is 48 Feet Quick Answer

You are looking for information, articles, knowledge about the topic nail salons open on sunday near me how long is 48 feet on Google, you do not find the information you need! Here are the best content compiled and compiled by the https://chewathai27.com team, along with other related topics such as: how long is 48 feet how long is 50 feet visually, 48 feet in yards, 48 feet to meters, how long is 16 yards, what is 48 inches in feet, 14 feet in inches, how tall is 50 feet compared to a building, 48 feet to cm

How many length make a feet?

In both customary and imperial units, one foot comprises 12 inches and one yard comprises three feet.

How many inches can go in 5 feet?

Answer: 5 feet is equal to 60 inches.

Is 60 inches longer than 4 feet?

4 feet equals 48 inches because 4×12=48. 5 feet equals 60 inches because 5×12=60. *You can also use a yardstick to measure length. *A yardstick is 3 feet long and has 36 inches.

What object is a foot long?

If you measure a 2-liter soda bottle, you will find that it is 12 inches long, or the equivalent of one foot.

What things are 15 feet long?

Even measuring something that’s only 15 feet long, which is the same as 5 yards or 4.572 meters, can be a challenge.
…
Here, I’m going to show you 10 everyday items you can use to measure 15 feet or close to it.

1.5 Kayaks. …
17 Comic Books. …
1 Canoe. …
6 Mini Fridges. …
2 Treadmills. …
1 Small SUV or Full-Sized Sedan. …
6 or 7 Footsteps.

How many feet are in the Mile?

Why a Mile Is 5,280 Feet | Reader’s Digest.

Is it 12 inches or feet?

One foot is equal to 12 inches. A foot (abbreviation ”ft”) is a unit of length in the United States customary and imperial measurement systems. The international agreement defined both units as equivalent to 12 inches, and in both systems, a foot is equal to 12 inches, and a yard is made up of 3ft.

How tall is 71 inches in height?

Height Comparison Charts

Feet, inches	Inches	Centimeters
5 feet 10 in	70 in	177.8 cm
5 feet 11 in	71 in	180.34 cm
6 feet	72 in	182.88 cm
6 feet 1 in	73 in	185.42 cm

How long is 60minutes?

There are 60 minutes in 1 hour.

Is a yard bigger than a foot?

Since a yard is longer than a foot, there will be fewer yards. So your answer will be less than 7. Find the conversion factor that compares feet and yards, with yards in the numerator.

How big is a yard?

The yard (symbol: yd) is an English unit of length in both the British imperial and US customary systems of measurement equalling 3 feet or 36 inches. Since 1959 it has been by international agreement standardized as exactly 0.9144 meter. A distance of 1,760 yards is equal to 1 mile.

How do you write 5 feet?

There are two popular ways of writing feet: the abbreviation “ft.” or the single apostrophe (′). Inches can be represented using “in.” or with a double apostrophe (″). As an example, five feet, ten inches could be written as 5 ft.

How do you measure feet size?

Place the piece of paper and your heel against a wall. Using your pen, trace your foot as closely as possible. …
With the outline, measure a straight line from your heel to the longest toe. This gives you the length of your foot in centimeters.
Lastly, add 1-1.5 centimeters to the length.

48 cm to inches?

Foot (unit) – Wikipedia

Article author: en.wikipedia.org
Reviews from users: 46600 Ratings
Top rated: 4.5
Lowest rated: 1
Summary of article content: Articles about Foot (unit) – Wikipedia Updating …
Most searched keywords: Whether you are looking for Foot (unit) – Wikipedia Updating
Table of Contents:

Contents

Historical origin[edit]

Definition[edit]

Historical use[edit]

Present day uses[edit]

Dimension[edit]

Foot (unit)

Customary unit of length

This article is about the unit of measure. For sizing of the human foot, see Shoe size . For other uses, see Foot (disambiguation)

foot Unit system Imperial/US units Unit of Length Symbol ft or ′ Conversions 1 ft in … … is equal to … Imperial/US units 1 / 3 yd

12 in Metric (SI) units 0.3048 m

30.48 cm

304.8 mm

The foot ( pl. feet), standard symbol: ft,[1][2] is a unit of length in the British imperial and United States customary systems of measurement. The prime symbol, ′, is a customarily used alternative symbol.[3] Since the International Yard and Pound Agreement of 1959, one foot is defined as 0.3048 meters exactly. In both customary and imperial units, one foot comprises 12 inches and one yard comprises three feet.

Historically the “foot” was a part of many local systems of units, including the Greek, Roman, Chinese, French, and English systems. It varied in length from country to country, from city to city, and sometimes from trade to trade. Its length was usually between 250 mm and 335 mm and was generally, but not always, subdivided into 12 inches or 16 digits.

The United States is the only industrialized nation that uses the international foot and the survey foot (a customary unit of length) in preference to the meter in its commercial, engineering, and standards activities.[4] The foot is legally recognized in the United Kingdom; road signs must use imperial units (however, distances on road signs are always marked in miles or yards, not feet), while its usage is widespread among the British public as a measurement of height.[5][6] The foot is recognized as an alternative expression of length in Canada[7] officially defined as a unit derived from the meter[8] although both the U.K. and Canada have partially metricated their units of measurement. The measurement of altitude in international aviation is one of the few areas where the foot is used outside the English-speaking world.

The length of the international foot corresponds to a human foot with shoe size of 13 (UK), 14 (US male), 15.5 (US female) or 48 (EU sizing).

Historical origin [ edit ]
Geometrei by Determination of the rod, using the length of the left foot of 16 randomly chosen people coming from church service. Woodcut published in the bookby Jakob Köbel (Frankfurt, c. 1535).

Historically, the human body has been used to provide the basis for units of length.[9] The foot of an adult Caucasian male is typically about 15.3% of his height,[10] giving a person of 175 cm (5 ft 9 in) a foot-length of about 268 mm (10.6 in), on average.

Archaeologists believe that, in the past, the people of Egypt, India, and Mesopotamia preferred the cubit, while the people of Rome, Greece, and China preferred the foot. Under the Harappan linear measures, Indus cities during the Bronze Age used a foot of 333.5 mm (13.2 in) and a cubit of 528.3 mm (20.8 in).[11] The Egyptian equivalent of the foot—a measure of four palms or 16 digits—was known as the djeser and has been reconstructed as about 30 cm (11.8 in).

The Greek foot (πούς, pous) had a length of 1/600 of a stadion,[12] one stadion being about 181.2 m (594 ft);[13] therefore a foot was, at the time, about 302 mm (11.9 in). Its exact size varied from city to city and could range between 270 mm (10.6 in) and 350 mm (13.8 in), but lengths used for temple construction appear to have been about 295 mm (11.6 in) to 325 mm (12.8 in); the former was close to the size of the Roman foot.

The standard Roman foot (pes) was normally about 295.7 mm (11.6 in) (97% of today’s measurement),[14] but, in the provinces, the so-called pes Drusianus (foot of Nero Claudius Drusus) was used, with a length of about 334 mm (13.1 in). (In reality, this foot predated Drusus.)[15]
Originally both the Greeks and the Romans subdivided the foot into 16 digits, but in later years, the Romans also subdivided the foot into 12 unciae (from which both the English words “inch” and “ounce” are derived).

After the fall of the Roman Empire, some Roman traditions were continued but others fell into disuse. In AD 790 Charlemagne attempted to reform the units of measure in his domains. His units of length were based on the toise and in particular the toise de l’Écritoire, the distance between the fingertips of the outstretched arms of a man.[16] The toise has 6 pieds (feet) each of 326.6 mm (12.9 in).

He was unsuccessful in introducing a standard unit of length throughout his realm: an analysis of the measurements of Charlieu Abbey shows that during the 9th century the Roman foot of 296.1 mm (11.66 in) was used; when it was rebuilt in the 10th century, a foot of about 320 mm (12.6 in)[Note 1] was used. At the same time, monastic buildings used the Carolingian foot of 340 mm (13.4 in).[Note 1][17]
The procedure for verification of the foot as described in the 16th century posthumously published work by Jacob Köbel in his book Geometrei. Von künstlichem Feldmessen und absehen is:[18][19]
Stand at the door of a church on a Sunday and bid 16 men to stop, tall ones and small ones, as they happen to pass out when the service is finished; then make them put their left feet one behind the other, and the length thus obtained shall be a right and lawful rood to measure and survey the land with, and the 16th part of it shall be the right and lawful foot.

England [ edit ]
The Neolithic long foot, first proposed by archeologists Mike Parker Pearson and Andrew Chamberlain, is based upon calculations from surveys of Phase 1 elements at Stonehenge. They found that the underlying diameters of the stone circles had been consistently laid out using multiples of a base unit amounting to 30 long feet, which they calculated to be 1.056 of a modern international foot (thus 12.672 inches or 0.3219 m). Furthermore, this unit is identifiable in the dimensions of some stone lintels at the site and in the diameter of the “southern circle” at nearby Durrington Walls. Evidence that this unit was in widespread use across southern Britain is available from the Folkton Drums from Yorkshire (neolithic artifacts, made from chalk, with circumferences that exactly divide as integers into ten long feet) and a similar object, the Lavant drum, excavated at Lavant, Sussex, again with a circumference divisible as a whole number into ten long feet.[20]
The measures of Iron Age Britain are uncertain and proposed reconstructions such as the Megalithic Yard are controversial. Later Welsh legend credited Dyfnwal Moelmud with the establishment of their units, including a foot of 9 inches. The Belgic or North German foot of 335 mm (13.2 in) was introduced to England either by the Belgic Celts during their invasions prior to the Romans or by the Anglo-Saxons in the 5th and 6th century.

Roman units were introduced following their invasion in AD 43. Following the Roman withdrawal and Saxon invasions, the Roman foot continued to be used in the construction crafts while the Belgic foot was used for land measurement. Both the Welsh and Belgic feet seem to have been based on multiples of the barleycorn, but by as early as 950 the English kings seem to have (ineffectually) ordered measures to be based upon an iron yardstick at Winchester and then London. Henry I was said to have ordered a new standard to be based upon the length of his own arm and, by the c. 1300 Act concerning the Composition of Yards and Perches[21] traditionally credited to Edward I or II, the statute foot was a different measure, exactly 10/11 of the old (Belgic) foot. The barleycorn, inch, ell, and yard were likewise shrunk, while rods and furlongs remained the same.[22] The ambiguity over the state of the mile was resolved by the 1593 Act against Converting of Great Houses into Several Tenements and for Restraint of Inmates and Inclosures in and near about the City of London and Westminster, which codified the statute mile as comprising 5,280 feet. The differences among the various physical standard yards around the world, revealed by increasingly powerful microscopes, eventually led to the 1959 adoption of the international foot defined in terms of the meter.

Definition [ edit ]
The international yard and pound agreement of July 1959 defined the length of the international yard in the United States and countries of the Commonwealth of Nations as exactly 0.9144 meters. Consequently, the international foot is defined to be equal to exactly 0.3048 meters. This was 2 ppm shorter than the previous U.S. definition and 1.7 ppm longer than the previous British definition.[23]
The 1959 agreement concluded a series of step-by-step events, set off in particular by the British Standards Institution’s adoption of a scientific standard inch of 25.4 millimetres in 1930.

Symbol [ edit ]
The IEEE standard symbol for a foot is “ft”.[1] In some cases, the foot is denoted by a prime, often approximated by an apostrophe, and the inch by a double prime; for example, 2 feet 4 inches is sometimes denoted as 2′ 4″.[3]
Imperial units [ edit ]
In Imperial units, the foot was defined as 1/3 yard, with the yard being realized as a physical standard (separate from the standard meter). The yard standards of the different Commonwealth countries were periodically compared with one another.[24] The value of the United Kingdom primary standard of the yard was determined in terms of the meter by the National Physical Laboratory in 1964 to be 0.9143969 m,[25] implying a pre-1959 UK foot of 0.3047990 m.

The UK adopted the international yard for all purposes through the Weights and Measures Act 1963, effective 1 January 1964.[26]
When the international foot was defined in 1959, a great deal of survey data was already available based on the former definitions, especially in the United States and in India. The small difference between the survey foot and the international foot would not be detectable on a survey of a small parcel, but becomes significant for mapping, or when the state plane coordinate system (SPCS) is used in the US, because the origin of the system may be hundreds of thousands of feet (hundreds of miles) from the point of interest. Hence the previous definitions continued to be used for surveying in the United States and India for many years, and are denoted survey feet to distinguish them from the international foot. The United Kingdom was unaffected by this problem, as the retriangulation of Great Britain (1936–62) had been done in meters.

In the United States, the foot was defined as 12 inches, with the inch being defined by the Mendenhall Order of 1893 as 39.37 inches = 1 m (making a US foot exactly 1200/3937 meters, approximately 0.30480061 m).[27][28] Out of 50 states and six other jurisdictions, 40 have legislated that surveying measures should be based on the U.S. survey foot, six have legislated that they be made on the basis of the international foot, and ten have not specified.[29]
State legislation is also important for determining the conversion factor to be used for everyday land surveying and real estate transactions, although the difference (two parts per million) is of no practical significance given the precision of normal surveying measurements over short distances (usually much less than a mile).

The National Institute of Standards and Technology, National Geodetic Survey, and the United States Department of Commerce are phasing out the US survey foot beginning in 2023.[30][31][27] However, its relevance may persist, as the Federal Register Notice says:[32]
“The date of December 31, 2022, was selected to accompany the modernization of the National Spatial Reference System (NSRS) by NOAA’s National Geodetic Survey (NGS). The reason for associating the deprecation of the U.S. survey foot with the modernization of the NSRS is that the biggest impact of the uniform adoption of the international foot will be for users of the NSRS, due to very large coordinate values currently given in U.S. survey feet in many areas of the U.S. Impacts related to the change to international feet will be minimized if a transition occurs concurrently with others changes in the NSRS.”

“The difference will have no effect on users of the existing NSRS (National Spatial Reference System), because NGS (NOAA’s National Geodetic Survey) will continue to support the U.S. survey foot for components of the NSRS where it is used now and in the past. In other words, to minimize disruption in the use of U.S. survey foot for existing NSRS coordinate systems, the change will apply only to the modernized NSRS.”

The Indian survey foot is defined as exactly 0.3047996 m,[33] presumably derived from a measurement of the previous Indian standard of the yard. The current National Topographic Database of the Survey of India is based on the metric WGS-84 datum,[34] which is also used by the Global Positioning System.

Historical use [ edit ]
Lehrbuch des gesammten Rechnens für die vierte Classe der Hauptschulen in den k.k. Staaten – 1848[35] (Combined mathematics textbook for the fourth form of senior schools in the Imperial & Royal states.) Page from Austrian– 1848(Combined mathematics textbook for the fourth form of senior schools in the Imperial & Royal states.)

An ISO 2848 measure of 3 basic modules (30 cm) is called a “metric foot”, but there were earlier distinct definitions of a metric foot during metrication in France and Germany.

France [ edit ]
In 1799 the meter became the official unit of length in France. This was not fully enforced, and in 1812 Napoleon introduced the system of mesures usuelles which restored the traditional French measurements in the retail trade, but redefined them in terms of metric units. The foot, or pied métrique, was defined as one third of a meter. This unit continued in use until 1837.[36]
Germany [ edit ]
In southwestern Germany in 1806, the Confederation of the Rhine was founded and three different reformed feet were defined, all of which were based on the metric system:[37]
In Hesse, the Fuß (foot) was redefined as 25 cm.

(foot) was redefined as 25 cm. In Baden, the Fuß was redefined as 30 cm.

was redefined as 30 cm. In the Palatinate, the Fuß was redefined as being 33 + 1 / 3 cm (as in France).

Other obsolete feet [ edit ]
Prior to the introduction of the metric system, many European cities and countries used the foot, but it varied considerably in length: the voet in Ypres, Belgium, was 273.8 millimeters (10.78 in) while the piede in Venice was 347.73 millimeters (13.690 in). Lists of conversion factors between the various units of measure were given in many European reference works including:

Many of these standards were peculiar to a particular city, especially in Germany (which, before German Unification in 1871, consisted of many kingdoms, principalities, free cities and so on). In many cases the length of the unit was not uniquely fixed: for example, the English foot was stated as 11 pouces 2.6 lignes (French inches and lines) by Picard, 11 pouces 3.11 lignes by Maskelyne and 11 pouces 3 lignes by D’Alembert.[45]
Most of the various feet in this list ceased to be used when the countries adopted the metric system. The Netherlands and modern Belgium adopted the metric system in 1817, having used the mesures usuelles under Napoleon[46] and the newly formed German Empire adopted the metric system in 1871.[47]
The palm (typically 200 mm to 280 mm) was used in many Mediterranean cities instead of the foot. Horace Doursther, whose reference was published[clarification needed] in Belgium which had the smallest foot measurements, grouped both units together, while J.F.G. Palaiseau devoted three chapters to units of length: one for linear measures (palms and feet), one for cloth measures (ells) and one for distances traveled (miles and leagues). In the table below, arbitrary cut-off points of 270 mm and 350 mm have been chosen.

(In Belgium, the words pied (French) and voet (Dutch) would have been used interchangeably.)

Notes [ edit ]
a b c d The source document used pre-metric French units (pied, pouce and lignes) ^ The original meter was computed using pre-metric French Units ^ The Norwegian fot was defined in 1824 as the length of a (theoretical) pendulum that would have a period of 12 / 38 seconds at 45° from the equator ^ Prior to 1835, the pé or foot was not used in Portugal – instead a palm was used. In 1835 the size of the palm was increased from 217.37 mm (according to Palaiseau) to 220 mm ^ The Scots foot ceased to be legal after the Act of Union in 1707

Present day uses [ edit ]
International ISO-standard and other intermodal shipping containers [ edit ]
International Standards Organisation (ISO)-defined intermodal containers for efficient global freight/cargo shipping, were defined using feet rather than meters for their leading outside (corner) dimensions. All ISO-standard containers to this day are eight feet wide, and their outer heights and lengths are also primarily defined in, or derived from feet.

Quantities of global shipping containers are still primarily counted in Twenty-foot Equivalent Units, or TEUs.

Aviation [ edit ]
Everyday global (civilian) air traffic / aviation continues to be controlled in flight levels (flying altitudes) separated by thousands of feet (although typically read out in hundreds – e.g. flight level 330 actually means 33,000 feet, or about 10 kilometres in altitude).

Dimension [ edit ]
In measurement, the term “linear foot” (sometimes incorrectly referred to as “lineal foot”) refers to the number of feet in a length of material (such as lumber or fabric) without regard to the width; it is used to distinguish from surface area in square foot.[57]
See also [ edit ]
Notes [ edit ]
a b The original reference was given in a round number of centimeters

How Many Feet Is 48 Inches?

48 inches equals 4 feet.

There are 12 inches in a single foot. This means that, in order to find out how many feet are in 48 inches, we would need to divide 48 by 12. The result is 4, which tells us that you can make 4 feet out of 48 inches.

Dividing the number of inches by 12 can always help you find the number of feet.

For example, if you want to know how many feet are in 200 inches, you would divide 200 by 12.

The answer, which is about 16.6, tells us that there are about 16.6 feet in 200 inches.

If you want to find out how many inches there are in a particular amount of feet, you can reverse the equation.

In this case, you would multiply the number of feet by 12.

Using the same initial example, you can multiply 4 feet by 12 to find that 4 feet equal 48 inches.

If you have 3 feet, you can multiply that number by 12 to find that there are 36 inches in 3 feet.

If you don’t feel like doing the math, use our online conversion calculator to convert different units of measurements and quickly give you the answer.

You can also use the following table to convert inches into feet.

Inches into feet conversion table

Inches Feet Inches Feet 10 0.833 200 16.667 20 1.667 300 25.000 30 2.500 400 33.333 40 3.333 500 41.667 50 4.167 600 50.000 60 5.000 700 58.333 70 5.833 800 66.667 80 6.667 900 75.000 90 7.500 1000 83.333 100 8.333 15000 125.000

You can also convert 48 inches into other units of measurement such as meters, centimeters, millimeters, yards, and miles.

48 inches= 1.212 meters

48 inches = 121.9 centimeters

48 inches = 1219 millimeters

48 inches = 1.333 yards

48 inches = 0.00075 miles

Feet measurement

A foot is a unit of length measurement that is equal to 12 inches or 0.305 meters.

Inches Measurement

An inch is a unit of linear measure equal to one-twelfth of a foot (2.54 cm).

Inch or inches is a length unit of measurement. It is used in the USA as a customary and Imperial unit of length.

More conversions

Sharing is caring!

How Many Yards Is 48 Feet?

Conversion formula

The conversion factor from feet to yards is 0.33333333333333, which means that 1 foot is equal to 0.33333333333333 yards:

1 ft = 0.33333333333333 yd

To convert 48 feet into yards we have to multiply 48 by the conversion factor in order to get the length amount from feet to yards. We can also form a simple proportion to calculate the result:

1 ft → 0.33333333333333 yd

48 ft → L (yd)

Solve the above proportion to obtain the length L in yards:

L (yd) = 48 ft × 0.33333333333333 yd

L (yd) = 16 yd

The final result is:

48 ft → 16 yd

We conclude that 48 feet is equivalent to 16 yards:

48 feet = 16 yards

So you have finished reading the how long is 48 feet topic article, if you find this article useful, please share it. Thank you very much. See more: how long is 50 feet visually, 48 feet in yards, 48 feet to meters, how long is 16 yards, what is 48 inches in feet, 14 feet in inches, how tall is 50 feet compared to a building, 48 feet to cm

Top 28 How Long Is 48 Feet Quick Answer

How many length make a feet?

How many inches can go in 5 feet?

Is 60 inches longer than 4 feet?

What object is a foot long?

What things are 15 feet long?

How many feet are in the Mile?

Is it 12 inches or feet?

How tall is 71 inches in height?

How long is 60minutes?

Is a yard bigger than a foot?

How big is a yard?

How do you write 5 feet?

How do you measure feet size?

Foot (unit) – Wikipedia

How Many Inches Are in 5 Feet? [solved]

how long is 48 feet

48 ft to in – How long is 48 feet in inches? [CONVERT] â

48 feet | The Measure of Things

Convert 48 Feet to Inches

403 Forbidden

48 Feet In Yards – How Many Yards Is 48 Feet?

How many feet are 48 inches

Foot (unit)

How Many Feet Is 48 Inches?

How Many Yards Is 48 Feet?

Leave a Comment Cancel reply

How many length make a feet?

How many inches can go in 5 feet?

Is 60 inches longer than 4 feet?

What object is a foot long?

What things are 15 feet long?

How many feet are in the Mile?

Is it 12 inches or feet?

How tall is 71 inches in height?

How long is 60minutes?

Is a yard bigger than a foot?

How big is a yard?

How do you write 5 feet?

How do you measure feet size?

Foot (unit) – Wikipedia

How Many Inches Are in 5 Feet? [solved]

how long is 48 feet

48 ft to in – How long is 48 feet in inches? [CONVERT] â

48 feet | The Measure of Things

Convert 48 Feet to Inches

403 Forbidden

48 Feet In Yards – How Many Yards Is 48 Feet?

How many feet are 48 inches

Foot (unit)

How Many Feet Is 48 Inches?

How Many Yards Is 48 Feet?

Leave a Comment Cancel reply

48 ft to in – How long is 48 feet in inches? [CONVERT] â