Top 44 How Many Feet Are In A Chain 12159 Good Rating This Answer

You are looking for information, articles, knowledge about the topic nail salons open on sunday near me how many feet are in a chain on Google, you do not find the information you need! Here are the best content compiled and compiled by the https://chewathai27.com team, along with other related topics such as: how many feet are in a chain how many feet are in a link, convert chains and rods to feet, how many links in a chain, 1 chain link, links to chains, 1 chain to inch, survey chain conversion, how many feet in a furlong

Contents

What length is a chain in feet?

The chain is a unit of length equal to 66 feet (22 yards). It is subdivided into 100 links or 4 rods. There are 10 chains in a furlong, and 80 chains in one statute mile. In metric terms, it is 20.1168 m long.

How many feet is a surveyor’s chain?

In 1620 an English mathematician and astronomer named Edmund Gunter described a surveyor’s chain with 100 links, measuring 66 feet (22 yards or 4 poles) overall. By this design, one square chain equals 484 square yards, ten square chains equal an acre, and eighty chains equal a mile.

How many chain links are in a foot?

Link to Foot Conversion Table

Link [li]	Foot [ft]
1 li	0.66 ft
2 li	1.32 ft
3 li	1.98 ft
5 li	3.3 ft

Why is 22 yards called a chain?

The ‘Chain’ comes from the ‘Surveyors’ Chain’, invented by Edmund Gunter, a mathematician who lived from 1581-1626, hence it is also known as ‘Gunter’s Chain’. As we all know, a chain is 22 yards, or the length of a cricket pitch.

What distance is a chain?

A chain is equal to 66 feet and is the basic unit for measuring distances in fire-control work.

What measurement is a chain?

A chain is a unit of length; it measures 66 feet or 22 yards or 4 rods or 100 links (20.1168m). There are 10 chains in a furlong, and 80 chains in one statute mile. An acre is the area of 10 square chains (that is, an area of one chain by one furlong).

Why is a chain 66?

The chain was originally called an “acre’s breadth”, because it was the width of a acre, while a furlong was the length. Edmund Gunter, a clergyman and mathematician, invented a measuring device called a chain. The chain was 66 ft (20 m) long. It was divided by 100 in small metal links.

How long is a Gunter’s chain link?

The chain was used by American surveyors from the colonial period through the early 20th century. A Gunter’s chain is 66′ (4 poles) long and is made up of one hundred links, connected by two rings. A brass tally or tag marks every ten links. A link in measurement includes a ring at each end and is 7.92” long.

How do you measure chain length?

If you want to measure the chain, you will need to open it up and make it as straight as possible. Lay it out on a table or flat surface so that it will be easy to measure. Measure the length with a ruler or tape measure. Extend the tape measure from one end of the chain to the other.

How long is a link in a chain?

In many measurement systems based on former English units, the link has remained fixed at 0.66 feet, therefore 0.22 yards or 7.92 inches; it is the absolute length of the yard that has varied.

How long is a 72 link chainsaw chain?

Saw Chain Drive Link / Footage Chart

Drive	3/8 & 3/8 Lo Pro	.325 Pitch
69	4.228	3.734
70	4.289	3.788
71	4.350	3.842
72	4.412	3.896

How many feet is a pitch?

Cricket Pitch Length in Feet

S. No	Dimension Measured	Size (in mtr)
1	Length of a cricket pitch from wicket to wicket	20.12 (66 feet)
2	Length of a cricket pitch from crease to crease	17.68 (58 feet)
3	Length of a cricket pitch from edge to edge	22.56 (74 feet)
4	Width of the cricket pitch used during the game	3.05 (10 feet)

How long is a pole?

Distance (length, height or width)

Measure	Equivalent
5½ yards	1 perch, pole or rod
40 poles	1 furlong
8 furlongs	1 mile
3 miles	1 league

Why is it called a furlong?

The name furlong derives from the Old English words furh (furrow) and lang (long). Dating back at least to early Anglo-Saxon times, it originally referred to the length of the furrow in one acre of a ploughed open field (a medieval communal field which was divided into strips).

Why is 3 feet called a yard?

Origin. The origin of the yard measure is uncertain. Both the Romans and the Welsh used multiples of a shorter foot, but 2+1⁄2 Roman feet was a “step” (Latin: gradus) and 3 Welsh feet was a “pace” (Welsh: cam).

How do you measure chain length?

How long should a chain be?

After a measurement is obtained, its a good idea to opt for a necklace size that is at least the second size up from your neck size. For example, if you have an 18 inch neck, you should probably choose a chain length of 20 inches or more. An 18 inch chain would feel too tight.

Why is the length of a Gunter’s chain 66 feet?

This i’s natural, because a 25-metre chain upsets the decimal theory, and a 50-metre chain is too clumsy. The length of a 20-metre chain in feet and decimals is 65.618. Gunter’s Chain is exactly 66 feet long, just all the difference for convenience of 0.382 foot.

What is the length of chain used for measuring distance?

Explanation: When the length of the chain used in measuring distance is longer than the standard length, the error in measured distance will be negative error because the chain will measure a larger distance than the original distance.

How many feet are in a kilometer? What is 0 degrees C in Fahrenheit? | 看哥到底有多重？

Chain (unit) – Wikipedia

Article author: en.wikipedia.org
Reviews from users: 7015 Ratings
Top rated: 3.1
Lowest rated: 1
Summary of article content: Articles about Chain (unit) – Wikipedia Updating …
Most searched keywords: Whether you are looking for Chain (unit) – Wikipedia Updating
Table of Contents:

Contents

Definition[edit]

Origin[edit]

Modern use and historic cultural references[edit]

Measuring instruments[edit]

Use in popular culture[edit]

References[edit]

External links[edit]

Navigation menu

Chain (unit) – Wikipedia

Article author: americanhistory.si.edu
Reviews from users: 12498 Ratings
Top rated: 3.5
Lowest rated: 1
Summary of article content: Articles about Surveyor’s Chain | National Museum of American History Updating …
Most searched keywords: Whether you are looking for Surveyor’s Chain | National Museum of American History Updating In 1620 an English mathematician and astronomer named Edmund Gunter described a surveyor’s chain with 100 links, measuring 66 feet (22 yards or 4 poles) overall. By this design, one square chain equals 484 square yards, ten square chains equal an acre, and eighty chains equal a mile. Gunther’s design proved extremely popular, especially in English lands. This example belonged to John Johnson (1771-1841), the Surveyor General of Vermont. It is made of steel, with round handles at either end, brass tallies every 10 links, and swivels every 25 links. Each link is joined to the next by three rings, and each unit (link and three rings) is 7.92 inches long.
Table of Contents:

Search Google Appliance

Donate Button

Collections

Collections Search

Search Google Appliance

Surveyor's Chain | National Museum of American History — Surveyor’s Chain | National Museum of American History

Article author: www.unitconverters.net
Reviews from users: 49350 Ratings
Top rated: 3.4
Lowest rated: 1
Summary of article content: Articles about Convert Link to Foot Updating …
Most searched keywords: Whether you are looking for Convert Link to Foot Updating Instant free online tool for link to foot conversion or vice versa. The link [li] to foot [ft] conversion table and conversion steps are also listed. Also, explore tools to convert link or foot to other length units or learn more about length conversions.
Table of Contents:

Convert Link to Foot

Article author: communityrail.org.uk
Reviews from users: 39090 Ratings
Top rated: 4.0
Lowest rated: 1
Summary of article content: Articles about Whats in a chain – Community Rail Network Updating …
Most searched keywords: Whether you are looking for Whats in a chain – Community Rail Network Updating
Table of Contents:

Whats in a chain - Community Rail Network — Whats in a chain – Community Rail Network

Article author: www.asknumbers.com
Reviews from users: 10481 Ratings
Top rated: 4.9
Lowest rated: 1
Summary of article content: Articles about Chains to Feet Conversion – How Many Feet in A Chain? Chain is an imperial length unit. 1 chain = 66 feet. Please visit all length units conversion to convert all length units. …
Most searched keywords: Whether you are looking for Chains to Feet Conversion – How Many Feet in A Chain? Chain is an imperial length unit. 1 chain = 66 feet. Please visit all length units conversion to convert all length units. Chains to feet converter, formulas and conversion table to find out how many feet in chains.ft, feet, chain, chains, feet to chains, how many chains in a foot
Table of Contents:

How many feet in a chain

How to convert feet to chains

Chains to Feet Conversion – How Many Feet in A Chain?

Article author: www.metric-conversions.org
Reviews from users: 4989 Ratings
Top rated: 4.0
Lowest rated: 1
Summary of article content: Articles about Chains to Feet conversion Unit of length equal to 66 feet, used especially in the U.S. public land surveys. The original measuring instrument (Gunter’s chain) was literally a chain … …
Most searched keywords: Whether you are looking for Chains to Feet conversion Unit of length equal to 66 feet, used especially in the U.S. public land surveys. The original measuring instrument (Gunter’s chain) was literally a chain … Chains to Feet (ch to ft) conversion calculator for Length conversions with additional tables and formulas.
Table of Contents:

Chains to Feet formula

Chains

Chains to Feet formula

Feet

Chains to Feet table

Chains to Feet conversion

Article author: en.wikipedia.org
Reviews from users: 37513 Ratings
Top rated: 4.2
Lowest rated: 1
Summary of article content: Articles about Chain (unit) – Wikipedia The chain is a unit of length equal to 66 feet (22 yards). It is subdived into 100 links or 4 rods. There are 10 chains in a furlong, and 80 chains in one … …
Most searched keywords: Whether you are looking for Chain (unit) – Wikipedia The chain is a unit of length equal to 66 feet (22 yards). It is subdived into 100 links or 4 rods. There are 10 chains in a furlong, and 80 chains in one …
Table of Contents:

Contents

Definition[edit]

Origin[edit]

Modern use and historic cultural references[edit]

Measuring instruments[edit]

Use in popular culture[edit]

References[edit]

External links[edit]

Navigation menu

Chain (unit) – Wikipedia

Article author: www.unitconverters.net
Reviews from users: 29661 Ratings
Top rated: 4.4
Lowest rated: 1
Summary of article content: Articles about Convert Chain to Foot Instant free online tool for chain to foot conversion or vice versa. The chain [ch] to foot [ft] conversion table and conversion steps are also listed. …
Most searched keywords: Whether you are looking for Convert Chain to Foot Instant free online tool for chain to foot conversion or vice versa. The chain [ch] to foot [ft] conversion table and conversion steps are also listed. Instant free online tool for chain to foot conversion or vice versa. The chain [ch] to foot [ft] conversion table and conversion steps are also listed. Also, explore tools to convert chain or foot to other length units or learn more about length conversions.
Table of Contents:

Convert Chain to Foot

Article author: www.kylesconverter.com
Reviews from users: 32202 Ratings
Top rated: 3.9
Lowest rated: 1
Summary of article content: Articles about Chains to Feet | Kyle’s Converter 1 Chain (Gunter’s Surveyor’s):: A survey Chain from Edmund Gunter’s system having 100 metal links and being 66 feet, or 4 rods, in length. Used in land … …
Most searched keywords: Whether you are looking for Chains to Feet | Kyle’s Converter 1 Chain (Gunter’s Surveyor’s):: A survey Chain from Edmund Gunter’s system having 100 metal links and being 66 feet, or 4 rods, in length. Used in land … Chains to Feet, Chains to Feet conversion factor, Chains to Feet consersion chart, online conversion calculatorInstantly Convert Chains (ch) to Feet (ft) and Many More Length Conversions Online. Chains Conversion Charts. Many Other Conversions.
Table of Contents:

Measurement Categories

Chain (unit)

Unit of length

chain Unit system imperial/US units Unit of length Conversions 1 chain in … … is equal to … imperial/US units 22 yd metric (SI) units 20.1168 m

The chain is a unit of length equal to 66 feet (22 yards). It is subdivided into 100 links[1][2] or 4 rods. There are 10 chains in a furlong, and 80 chains in one statute mile.[2] In metric terms, it is 20.1168 m long.[2] By extension, chainage (running distance) is the distance along a curved or straight survey line from a fixed commencing point, as given by an odometer.

The chain has been used for several centuries in England and in some other countries influenced by English practice. In the United Kingdom, there were 80 chains to the mile, but until the early nineteenth century the Scottish and Irish customary miles were longer than the statute mile; consequently a Scots chain was about 74 (imperial) feet,[3] an Irish chain 84 feet. These longer chains became obsolete following the adoption of the imperial system of units in 1824.[4]
Definition [ edit ]
The UK statute chain is 22 yards, which is 66 feet (20.117 m). This unit is a statute measure in the United Kingdom, defined in the Weights and Measures Act 1985.[5] One link is a hundredth part of a chain, which is 7.92 inches (20.1 cm).[6]
Origin [ edit ]
The surveyor’s chain was first mentioned 1579[7] and appears in an illustration in 1607.[8] In 1593 the English mile was redefined by a statute of Queen Elizabeth I as 5,280 feet, to tie in with agricultural practice. In 1620, the polymath Edmund Gunter developed a method of accurately surveying land using a surveyor’s chain 66 feet long with 100 links.[9] The 66 feet unit, which was four perches or rods,[10] took on the name the chain. By 1675 it was accepted, and Ogilby wrote:

…a Word or two of Dimensurators or Measuring Instruments, whereof the mosts usual has been the Chain, and the common length for English Measures 4 Poles, as answering indifferently to the Englishs Mile and Acre, 10 such Chains in length making a Furlong, and 10 single square Chains an Acre, so that a square Mile contains 640 square Acres…'[7] John Ogilby, Britannia, 1675

From Gunter’s system, the chain and the link became standard surveyors’ units of length and crossed to the colonies. The thirteen states of America were expanding westward and the public land had to be surveyed for a cadastral. In 1784 Thomas Jefferson wrote a report for the Continental Congress proposing the rectangular survey system; it was adopted with some changes as the Land Ordinance of 1785 on 20 May the following year. In the report, the use of the chain as a unit of measurement was mandated, and the chain was defined.[11]
The chain is the unit of linear measurement for the survey of the public lands as prescribed by law. All returns of measurement in the rectangular system are made in the true horizontal distance in links, chains, and miles. The only exceptions to this rule are special requirements for measurement in feet in mineral surveys and townsite surveys.[11] Linear Measurement 1 Chain = 100 links or 66 feet 1 Mile = 80 chains or 5,280 feet Area Measurement 1 Acre = 10 square chains or 43,560 square feet 1 square mile = 640 acres — Lola Cazier (1976), Surveys and Surveyors of the Public Domain 1785-1975, page 15

Modern use and historic cultural references [ edit ]
Britain [ edit ]
Location designator painted on a British railway bridge, showing 112 miles and 63 chains; photograph taken August 2007

In Britain, the chain is no longer used for practical survey work.[12] However, it survives on the railways of the United Kingdom as a location identifier. When railways were designed, the location of features such as bridges and stations was indicated by a cumulative longitudinal “mileage”, using miles and chains, from a zero point at the origin or headquarters of the railway, or the originating junction of a new branch line. Since railways are entirely linear in topology, the “mileage” or “chainage” is sufficient to identify a place uniquely on any given route. Thus a certain bridge location may be indicated as 112 miles and 63 chains (181.51 km) from the origin. In the case of the photograph the bridge is near Keynsham, that distance from London Paddington station. The indication “MLN” after the mileage is the engineers’ line reference describing the route as the Great Western Main Line, so that visiting engineers can uniquely describe the bridge they are inspecting, as there may be bridges at 112 miles 63 chains on other routes.

On new railway lines built in the United Kingdom such as High Speed 1, the position along the alignment is still called “chainage” although the value is now defined in metres.[13]
North America [ edit ]
The use of the chain was mandatory in laying out US townships.[11] A federal law was passed in 1785 (the Public Land Survey Ordinance) that all official government surveys must be done with a Gunter’s (surveyor’s) chain. Chains and links are commonly encountered in older metes and bounds legal descriptions. Distances on township plat maps made by the US General Land Office are shown in chains.

Under the US Public Land Survey System, parcels of land are often described in terms of the section (640 acres or 259 hectares), quarter-section (160 acres or 64.7 hectares), and quarter-quarter-section (40 acres or 16.19 hectares). Respectively, these square divisions of land are approximately 80 chains (one mile or 1.6 km), 40 chains (half a mile or 800 m), and 20 chains (a quarter mile or 400 m) on a side.

The chain is still used in agriculture: measuring wheels with a circumference of 0.1 chain (diameter ≈ 2.1 ft or 64 cm) are still readily available in Canada and the United States. For a rectangular tract, multiplying the number of turns of a chain wheel for each of two adjacent sides and dividing by 1,000 gives the area in acres.

In Canada, road allowances were originally 1 chain wide and are now 20 metres.[14]
The unit was also used in mapping the United States along train routes in the 19th century. Railroads in the United States have long since[when?] used decimal fractions of a mile. Some subways such as the New York City Subway and the Washington Metro were designed with and continue with a chaining system using the 100-foot engineer’s chain.[15]
In the United States, the chain is also used as the measure of the rate of spread of wildfires (chains per hour), both in the predictive National Fire Danger Rating System as well as in after-action reports. The term chain is used by wildland firefighters in day-to-day operations as a unit of distance.[16]
Australia and New Zealand [ edit ]
In Australia and New Zealand, most building lots in the past were a quarter of an acre, measuring one chain by two and a half chains, and other lots would be multiples or fractions of a chain.[17] The street frontages of many houses in these countries are one chain wide—roads were almost always 1 chain (20.1 m) wide in urban areas,[17] sometimes 1.5 chains (30.2 m) or 2.5 chains (50.3 m). Laneways would be half a chain (10.1 m). In rural areas the roads were wider, up to 10 chains (201.2 m) where a stock route was required. 5 chains (100.6 m) roads were surveyed as major roads or highways between larger towns, 3 chains (60.4 m) roads between smaller localities,[18] and 2 chains (40.2 m) roads were local roads in farming communities. Roads named Three Chain Road etc. persist today.[19][20]
The “Queen’s Chain” is a concept that has long existed in New Zealand, of a strip of public land, usually 20 metres (or one chain in pre-metric measure) wide from the high water mark, that has been set aside for public use along the coast, around many lakes, and along all or part of many rivers.[21][22] These strips exist in various forms (including road reserves, esplanade reserves, esplanade strips, marginal strips and reserves of various types) but not as extensively and consistently as is often assumed.[23]
Cricket pitches [ edit ]
The chain also survives as the length of a cricket pitch, being the distance between the stumps.[24][25]
Measuring instruments [ edit ]
Civil engineers and surveyors use various instruments (chains) for measuring distance.[26] Other instruments used for measuring distance include tapes and bands. A steel band is also known as a “band chain”.[27]
Surveyors’ chain (Gunter’s chain) [ edit ]
In 1620, the polymath Edmund Gunter developed a method of accurately surveying land using a 100 link chain, 66 feet long called the Gunter’s Chain. Other surveyors chains have been used historically.

Engineer’s chain (Ramsden’s chain) [ edit ]
A longer chain of 100 feet (30.5 m), with a hundred 1 foot (305 mm) links, was devised in the UK in the late 18th century by Jesse Ramsden, though it never supplanted Gunter’s chain.[6] Surveyors also sometimes used such a device, and called it the engineer’s chain.

Vara or Texas chain [ edit ]
In the Southwestern United States, the vara chain also called the Texas chain, of 20 varas (16.9164 m , or 55+1⁄2 ft) was used in surveying Spanish and later Mexican land grants, such as the major Fisher–Miller and Paisano Grants in Texas, several similarly large ones in New Mexico, and over 200 smaller ranchos in California.

Metric chains [ edit ]
Metric chains, of lengths 5 m, 10 m, 20 m and 30 m, are widely used in India.[26] Tolerances are +/- 3 mm for 5 m and 10 m chains, +/- 5 mm for a 20 m chain, and +/- 8 mm for a 30 m chain.[28]
Revenue chain [ edit ]
In India, a revenue chain with 16 links and of length 10 m (33 ft) is used in cadastral surveys.[29]
Other instruments [ edit ]
Also in North America, a variant of the chain is used in forestry for traverse surveys.[citation needed] This modern chain is a static cord (thin rope) 50 metres long, marked with a small tag at each metre, and also marked in the first metre every decimetre.[citation needed] When working in dense bush, a short axe or hatchet is commonly tied to the end of the chain, and thrown through the bush in the direction of the traverse.[clarification needed]
Another version used extensively in forestry and surveying is the hip-chain: a small box containing a string counter, worn on the hip.[citation needed] The user ties off the spooled string to a stake or tree and the counter tallies distance as the user walks away in a straight line. These instruments are available in both feet and metres.

Use in popular culture [ edit ]
The lyrics of Three Chain Road, by Lee Kernaghan, include the line “He lived out on the three chain road” which is the name of many Australian roads; referring to the width of the road reserve.[30]

Convert Link to Foot

Convert Link to Foot

Please provide values below to convert link [li] to foot [ft], or vice versa.

From: link To: foot

Link to Foot Conversion Table

Link [li] Foot [ft] 0.01 li 0.0066 ft 0.1 li 0.066 ft 1 li 0.66 ft 2 li 1.32 ft 3 li 1.98 ft 5 li 3.3 ft 10 li 6.6 ft 20 li 13.2 ft 50 li 33 ft 100 li 66 ft 1000 li 660 ft

How to Convert Link to Foot

1 li = 0.66 ft

1 ft = 1.5151515152 li

Example: convert 15 li to ft:

15 li = 15 × 0.66 ft = 9.9 ft

Popular Length Unit Conversions

Convert Link to Other Length Units

Whats in a chain

I often wondered where the ‘Chain’ measurement came from so I was pleased to discover this exhibit at the Weald & Downland Open Air Museum.

The ‘Chain’ comes from the ‘Surveyors’ Chain’, invented by Edmund Gunter, a mathematician who lived from 1581-1626, hence it is also known as ‘Gunter’s Chain’.

As we all know, a chain is 22 yards, or the length of a cricket pitch. Gunter’s Chain is divided into 100 links with a brass ‘tally’ every 10 links, which look rather like hands with different numbers of fingers.

The Museum notes that the chain is still in use by the U.S. Bureau of Land Management, and is aware of the connection between chains and the railway. It doesn’t mention, however, that Chains still are alive and well on today’s railway.

It is interesting that, although the Chain is often seen as a vestige of old-fashioned weights and measures, Gunter was an early advocate of decimal measurement, dividing his Chain into 100 and suggesting that both feet and inches should be divided into tenths, although not being so radical as to suggest an entire decimal measurement system – that took another 200 years to arrive.

Mike Franklyn

So you have finished reading the how many feet are in a chain topic article, if you find this article useful, please share it. Thank you very much. See more: how many feet are in a link, convert chains and rods to feet, how many links in a chain, 1 chain link, links to chains, 1 chain to inch, survey chain conversion, how many feet in a furlong

Top 44 How Many Feet Are In A Chain 12159 Good Rating This Answer

What length is a chain in feet?

How many feet is a surveyor’s chain?

How many chain links are in a foot?

Why is 22 yards called a chain?

What distance is a chain?

What measurement is a chain?

Why is a chain 66?

How long is a Gunter’s chain link?

How do you measure chain length?

How long is a link in a chain?

How long is a 72 link chainsaw chain?

How many feet is a pitch?

How long is a pole?

Why is it called a furlong?

Why is 3 feet called a yard?

How do you measure chain length?

How long should a chain be?

Why is the length of a Gunter’s chain 66 feet?

What is the length of chain used for measuring distance?

Chain (unit) – Wikipedia

Surveyor’s Chain | National Museum of American History

Convert Link to Foot

Whats in a chain – Community Rail Network

Chains to Feet Conversion – How Many Feet in A Chain?

Chains to Feet conversion

Chain (unit) – Wikipedia

Convert Chain to Foot

Chains to Feet | Kyle’s Converter

Chains to Feet – convert ch to ft

Convert chain unit to ft | chain to feet

Convert chain to feet – Conversion of Measurement Units

Conversion chain to foot (ft)

Chain (unit)

Convert Link to Foot

Whats in a chain

Leave a Comment Cancel reply