You are looking for information, articles, knowledge about the topic nail salons open on sunday near me how much oil does an ls1 take on Google, you do not find the information you need! Here are the best content compiled and compiled by the https://chewathai27.com team, along with other related topics such as: how much oil does an ls1 take ls1 oil type, ls1 oil weight, best oil for built ls1, 6.0 ls oil capacity, ls1 corvette oil capacity, ls1 10w30, 2002 pontiac trans am ws6 oil type, 2000 camaro ss oil type
Contents
How many liters of oil does an LS1 take?
5l +0.5l should see you right. Holden and the latest workshop I am using which specialise in a lot of LS1’s have always put 6 litres in mine from new. If left to settle overnight it shows a slight overfill, if checked after stopping for a minute or so it shows pretty much on the full line.
How many quarts does a LS1 hold?
Both my 2001 and 2004 manuals say 6.5 qts with filter and 6.0 qts without filter.
How much oil does a 5.7 LS take?
These engines leave Indmar filled with 5W30 Mobil 1 and that is the oil that should be used in these engines at the normal 50 hour oil change intervals. The oil capacity of these engines is approximately 6 quarts (5.7 Liters).
What oil does a LS1 take?
LS1 is different. It requires 10w-40 from factory. All LS engines after the LS1 (LS2 onwards, Commodore’s require 5w-30 from factory).
How much oil does a 2004 Chevy Corvette take?
With filter 6.4 quarts After refill check oil level.
How much oil does a v8 Camaro take?
Your Camaro SS really does need 10 quarts of oil. There are a few reasons why your oil change might have been more expensive, including: More expensive vehicles require a few more steps for basic services like oil changes, which means labor might cost more.
How much oil does a 2010 Camaro SS take?
8 quarts is correct, it tells you the same in the owners manual. It is not a dry sump but it does have an oil cooler which adds to its overall volume.
How many quarts of oil does a 2000 Camaro take?
With filter 4.5 quarts After refill check oil level.
How much oil does a 1990 5.7 Chevy take?
4 Answers. A 5.7L engine takes 5 quarts with the oil filter.
How much oil does a 5.7 Chevy Silverado take?
What is this? Some Chevy models have an engine capacity of 4.3 liters which holds 4.54 quarts of oil. Other models with engines of 5.7 liters holding 6.02 quarts of oil. Chevy Silverado models with larger engines of 8 liters and 9.5 liters hold 8.45 quarts and 10.04 quarts, respectively.
What is engine oil 10w40?
10W-40 10W-40 is the engine oil which offers a 10 weight performance in the cold starting temperature. On the other hand, it provides a 40 weight performance at the normal operating temperature of the engine.
What oil does a VE SS take?
CASTROL MAGNATEC FUEL SAVER DX 5W-30.
How much oil does a VE v8 take?
Replace filter and plug ensuring hand tight filter and spanner tight plug. Fill with 8.3 litres of your favourite oil then replace cap. Start engine and allow to idle for 5 minutes, then take for steady cruise unitl normal operating temp is reached.
How much oil does a VY Commodore take?
The actual oil capacity for a V6 Commodore of that vintage is 5.3 litres, so if you buy a six-litre pack, you’ll have enough for tops-ups between oil changes.
How much oil does a 2001 Corvette take?
2001 Coupe, manual states 6.5/Qts with Filter Change.
How many quarts of oil does a c5 Corvette take?
What Makes an Oil Change on a C-5 Special? The oil pan on the C-5 is a large, aluminum casting, with a pair of side wings. The oil pan holds 6 quarts (6 ½ with filter). The “old” way to make a high capacity oil pan was to weld a deeper sump onto the bottom of the pan.
How much oil does a 1999 Corvette take?
| Product Name | Capacities | Product |
|---|---|---|
| XL 5W-30 Synthetic Motor Oil | With filter 6.4 quarts After refill check oil level. | XLFQT-EA Add To Cart Add To Cart |
| OE 5W-30 Synthetic Motor Oil | With filter 6.4 quarts After refill check oil level. | OEFQT-EA Add To Cart Add To Cart |
How many oil quarts does an ls1 take?
- Article author: www.ls1.com
- Reviews from users: 16570
Ratings - Top rated: 4.5
- Lowest rated: 1
- Summary of article content: Articles about How many oil quarts does an ls1 take? The manual says at oil change time with a filter change put in 5.5 quarts of oil. If you read a wear test on different motor oils, you WOULD NOT use Mobil oil. …
- Most searched keywords: Whether you are looking for How many oil quarts does an ls1 take? The manual says at oil change time with a filter change put in 5.5 quarts of oil. If you read a wear test on different motor oils, you WOULD NOT use Mobil oil. How,many,oil,quarts,does,ls1,take,quartsHow many oil quarts does an ls1 take?
- Table of Contents:
Oil change how much to use. [Archive] – Australian LS1 and Holden Forums
- Article author: www.ls1.com.au
- Reviews from users: 17594 Ratings
- Top rated: 3.4
- Lowest rated: 1
- Summary of article content: Articles about Oil change how much to use. [Archive] – Australian LS1 and Holden Forums Updating …
- Most searched keywords: Whether you are looking for Oil change how much to use. [Archive] – Australian LS1 and Holden Forums Updating oil, change, 150,000km, grade, z-grip, ect, cheers, exhaust.headers,otr, mods, bolt, clock, filter, question, bit, dumb, vyss, presume, 5.7litresOk a bit of a dumb question im doing a oil change and filter on my VYSS
and dont know how much oil to use i presume it would be more than 5.7litres?
Can anyone tell me what grade to use it has 150,000km on the clock and have some bolt on mods exhaust.headers,OTR Z-grip ect..
cheers - Table of Contents:
Official LS1 oil capacity? – CorvetteForum – Chevrolet Corvette Forum Discussion
- Article author: www.corvetteforum.com
- Reviews from users: 41236 Ratings
- Top rated: 3.3
- Lowest rated: 1
- Summary of article content: Articles about Official LS1 oil capacity? – CorvetteForum – Chevrolet Corvette Forum Discussion Updating …
- Most searched keywords: Whether you are looking for Official LS1 oil capacity? – CorvetteForum – Chevrolet Corvette Forum Discussion Updating 2004, 2011, c5, capacities, capacity, change, cherverolet, chevrolet, corvette, engine, fluid, ls1, oil, quarts, specs, Official LS1 oil capacity?, Corvette, C7 Corvette, c6 corvette,C7,C6,C5,C4,C3,C2,C1, reviews,guides, parts, exhaust,performance, sale, forum, corvette forumC5 Tech – Official LS1 oil capacity? – Hey guys, I searched around and have read that guys put 5.5 – 6.5 quarts in for an oil change. I think the owners manual says 5.5 quarts but someone had mentioned its a mistake? Just a little confused, and was wondering what the official correct number is. Thanks!
- Table of Contents:
how much oil does an ls1 take
- Article author: www.deepcreekmarina.com
- Reviews from users: 34344 Ratings
- Top rated: 4.2
- Lowest rated: 1
- Summary of article content: Articles about how much oil does an ls1 take Updating …
- Most searched keywords: Whether you are looking for how much oil does an ls1 take Updating
- Table of Contents:
What oil should you run in… – Holden commodore SS Fan club. | Facebook
- Article author: www.facebook.com
- Reviews from users: 4072 Ratings
- Top rated: 4.3
- Lowest rated: 1
- Summary of article content: Articles about What oil should you run in… – Holden commodore SS Fan club. | Facebook Updating …
- Most searched keywords: Whether you are looking for What oil should you run in… – Holden commodore SS Fan club. | Facebook Updating What oil should you run in your LS Commodore? 🤔
No more guessing, Holden Commodore SS Fan Club has a guide to what oil you should use!… - Table of Contents:
How much oil do you run in ls1 and how much is too much? – LS1TECH – Camaro and Firebird Forum Discussion
- Article author: ls1tech.com
- Reviews from users: 23009 Ratings
- Top rated: 3.3
- Lowest rated: 1
- Summary of article content: Articles about How much oil do you run in ls1 and how much is too much? – LS1TECH – Camaro and Firebird Forum Discussion My ls2 calls for 6.5 quarts with filter, I just dump in a full 7 quarts. Half a quart more is not enough to cause problems, and it’s always good … …
- Most searched keywords: Whether you are looking for How much oil do you run in ls1 and how much is too much? – LS1TECH – Camaro and Firebird Forum Discussion My ls2 calls for 6.5 quarts with filter, I just dump in a full 7 quarts. Half a quart more is not enough to cause problems, and it’s always good … How,much,oil,do,you,run,ls1,how,much,too,much,2002, 99, amount, bit, camaro, change, dipstick, formula, higher, ls1, oil, people, pontiac, put, run, How much oil do you run in ls1 and how much is too much?, LS1Tech – Forum and Community for GM Performance Vehicles – LS1New LS1 Owners – Newbie Tech – How much oil do you run in ls1 and how much is too much? – Just did my oil change with 6 quarts and on the dipstick it reads a little bit higher then the full mark but not by much… should i drain a little out? Reading the forum i read of some people using 5.5 quarts all the way to 7 qts
- Table of Contents:
how much oil for 5,7L ? | Just Commodores
- Article author: forums.justcommodores.com.au
- Reviews from users: 5386 Ratings
- Top rated: 3.6
- Lowest rated: 1
- Summary of article content: Articles about how much oil for 5,7L ? | Just Commodores Around 6.2L, it should say it in your manual. …
- Most searched keywords: Whether you are looking for how much oil for 5,7L ? | Just Commodores Around 6.2L, it should say it in your manual. how much oil does a 5.7 in a vx take… replacing filter ??
- Table of Contents:
How much oil and what weight for my 98 LS1? – CamaroZ28.Com Message Board
- Article author: www.camaroz28.com
- Reviews from users: 46096 Ratings
- Top rated: 3.2
- Lowest rated: 1
- Summary of article content: Articles about How much oil and what weight for my 98 LS1? – CamaroZ28.Com Message Board Most go with 5.5 quarts. After doing a little research when I had my engine out, you can run almost 6.5 quarts without the oil level coming into … …
- Most searched keywords: Whether you are looking for How much oil and what weight for my 98 LS1? – CamaroZ28.Com Message Board Most go with 5.5 quarts. After doing a little research when I had my engine out, you can run almost 6.5 quarts without the oil level coming into … How,much,oil,what,weight,my,98,LS1, How much oil and what weight for my 98 LS1?, Camaro,forum,camaro forum,camaroz28,camaro z ,z, z28,ss,rs,v6,v8,ls,lt,ls3,lsa,parts,sale,reviews,chevy,chevrolet forum,chevrolet,f-body,5th genLS1 Based Engine Tech – How much oil and what weight for my 98 LS1? – I know its probably been discussed before, and its a very basic question, but was not able to come up with good search results. How much oil will I need for an oil change in my 98 LS1. I plan on going with the standard AC Delco filter, not one of…
- Table of Contents:
Official LS1 oil capacity? – CorvetteForum – Chevrolet Corvette Forum Discussion
- Article author: www.corvetteforum.com
- Reviews from users: 16341 Ratings
- Top rated: 3.7
- Lowest rated: 1
- Summary of article content: Articles about Official LS1 oil capacity? – CorvetteForum – Chevrolet Corvette Forum Discussion Oil capacity is 6.5 gt and if racing 7 qts is perfectly acceptable.. Oil Life algorithms are based on 6.5 qts. Baselines where changed in 2000 … …
- Most searched keywords: Whether you are looking for Official LS1 oil capacity? – CorvetteForum – Chevrolet Corvette Forum Discussion Oil capacity is 6.5 gt and if racing 7 qts is perfectly acceptable.. Oil Life algorithms are based on 6.5 qts. Baselines where changed in 2000 … 2004, 2011, c5, capacities, capacity, change, cherverolet, chevrolet, corvette, engine, fluid, ls1, oil, quarts, specs, Official LS1 oil capacity?, Corvette, C7 Corvette, c6 corvette,C7,C6,C5,C4,C3,C2,C1, reviews,guides, parts, exhaust,performance, sale, forum, corvette forumC5 Tech – Official LS1 oil capacity? – Hey guys, I searched around and have read that guys put 5.5 – 6.5 quarts in for an oil change. I think the owners manual says 5.5 quarts but someone had mentioned its a mistake? Just a little confused, and was wondering what the official correct number is. Thanks!
- Table of Contents:
See more articles in the same category here: https://chewathai27.com/toplist.
Oil change how much to use. [Archive]
View Full Version : Oil change how much to use.
MickmeMate Ok a bit of a dumb question im doing a oil change and filter on my VYSS
and dont know how much oil to use i presume it would be more than 5.7litres?
Can anyone tell me what grade to use it has 150,000km on the clock and have some bolt on mods exhaust.headers,OTR Z-grip ect..
cheers
MJR-57T From memory 6L it good. More is apparently better in the LS1
Do a search on the grade of oil but the books say 10w/30 or 10w/40
2 cylinders shy before everyone comes in telling you to do a search. The consensus is.
Castrol Edge Sport 10W-60
about $60.00 for 5L
overfill by .5l if you are doing any circuit work.
Mohit I believe the oil refill capacity is about 6.3L including oil filter
macca33 I think that 6.3l is going a bit steep. 5l +0.5l should see you right.
cheers
Mohit I think that 6.3l is going a bit steep. 5l +0.5l should see you right.
cheers
Castrol Lube Guide states: Service Refill Capacity: 5.0-6.2L including oil filter
I’ve been putting in about 6.3L with oil filter in my VYII SS since i’ve owned it every 5000km without any issues
Drewie Holden and the latest workshop I am using which specialise in a lot of LS1’s have always put 6 litres in mine from new. If left to settle overnight it shows a slight overfill, if checked after stopping for a minute or so it shows pretty much on the full line.
macca_779 Sump capacity changed over the years. Not entirely sure about VY+. But I know VT VX is almost bang on 5L. I don’t even look when doing my own. Throw a whole bottle of 10w60 in and walk away.
MickmeMate Thanks for all the input guys i was think about 10w 40w but its quite hard to find in the full synthetics. Castrol edge 10w 60w i have been told is good but in the winter months a lower viscosity should be used .Is this correct??
MickmeMate Would 5w 30 be pushing it considering the kms i have because its quite cheap in the Castrol edge at the moment.
Peter B – CV8 What oil type has been used in the car to date ???? Not always a good idea to change.
5/30 is a little on the light side (unless you live in the Arctic Circle). I’ve used Mobil Semi/Syn 10/40 and found it quite good – but you need to change it every 5,000 k’s. A full synthetic oil would enable you push the change interval out to 10,000 k’s.
A lot of guys use & recommend the Castrol Edge 10/60. I would use it if I was running a forced motor (supercharged/turbo) as you need the additional film strength it provides. In my opinion, it’s a bit of overkill on an (internally) unmodded engine.
There are plenty of oil threads to read if you have a day or two to spare…..
Holden Nut My VY Series II is 6 litres. Whatever happens, 5L is more than likely not going to be enough. Just pour 5L in and then check the dipstick…simple.
feistl Well mine uses around 9.7L, but has an external cooler.
Keep an eye out for specials… I picked up 35L of Castrol Sport Edge 10W60 for $50/5L recently. They also had 15w40 for the same price…
Its also probably worth looking at a decent filter, it amazes me how many people run stock filters on modified/high performance engines.
I use pureone oil filters… Basically they are a heap better than stock (catch a LOT smaller fragments) and not “THAT” expensive. IIRC they are about $13-15 each, compared to $5-7. Still, considering most members here spend a shit load on their car, its hardly going to break the bank.
I ordered in 10 last time, so ive got them in stock for a few changes (Im running dual filters, so should get me 5 changes).
On top of that, it might be worth looking at a filtermag. Basically its a magnet that attaches to your filter, and helps catch metal fragments.
Cheers
redvxr8clubby My VY Series II is 6 litres. Whatever happens, 5L is more than likely not going to be enough. Just pour 5L in and then check the dipstick…simple.
They must have changed the spec for VY, the Holden VX owners book says 5.0 inc oil filter for a VX LS1. I recently changed mine and 5 litres seemed right. Did the sump change from VX to VY or did Holden just up the recommendation.
gavlotic from what i heard they never changed the sump but the dip stick was changed from VX to VY.
cheers,
Gav
VTR8Clubby from what i heard they never changed the sump but the dip stick was changed from VX to VY.
cheers,
Gav
This is correct. My manual says 5L(VT) but holden revised the dipsticks in the later models to read full at 5.5L. I always put the extra .5L in mine.
kane_tools From an ex- 10W60 edge user in my last car an LS1.
You were trying to find a 10W40 full synthetic??
I’m going to toss this snake oil seller into the mix
Nulon 10W40 Synthetic (gold bottle) around 50-60 clams for 6 ltr
I did run edge in the taxi but tried the snake oil brand on advice of the main XR6T forum after royal purple etc, and in the ford anyway the turbo spin-down is dramatically quieter and longer on the Nulon than the castrol, it stays cleaner longer and is recommended weight for our cars
I have had no issue with it or it’s quality.
***VX*R8*** Can anyone tell me if 5.0L is correct for the VX LS1 and would 10w-60 be good for an ls1 that has done almost 200,000kms?
Thankyou.
XUV I use pureone oil filters… Basically they are a heap better than stock (catch a LOT smaller fragments) and not “THAT” expensive. IIRC they are about $13-15 each, compared to $5-7. Still, considering most members here spend a shit load on their car, its hardly going to break the bank.
Cheers
Where you buying them from ? got an buy online address ?
jamit Don’t forget if you are changing your oil filter that you will need more oil.
Just had a quick look at the VT –> VY workshop manual that I found online and it says.
Oil Capacity: Gen III -5.7 V8
w/o Oil Filter 4.7Lt
w/ Oil Filter 5.0Lt
Also if you are changing the Filter
a)Pour some clean engine oil into the filter, until level is approximately 2 cms below top of filter.
b) Smear some engine oil over the filter seal
c) Screw the filter into place until the seal contacts mating surface of adaptor. then tighten through a futher 2/3 of a turn.
Hope this helps.
Blown 540 Maybe just fill it to the correct level on the dipstick , crazy idea I know but I did read somewhere that’s what there for.
Or as i have seen a couple of people do , fill it through the dipstick tube till it overflows and then drive it.
It’s amazing how much extra oil you can put in and they still run ok.
Holden Nut Can anyone tell me if 5.0L is correct for the VX LS1 and would 10w-60 be good for an ls1 that has done almost 200,000kms?
Thankyou.I used to own a VX before my VY and 5L wasn’t enough.
I can’t remember exactly to be perfectly honest but it was either 5.5 or 6L that I needed. 10w60 (I presume castrol edge or mainlube) is widely used by people on here so I’m sure it would work in yours.
Drewie I used to own a VX before my VY and 5L wasn’t enough.
I can’t remember exactly to be perfectly honest but it was either 5.5 or 6L that I needed. 10w60 (I presume castrol edge or mainlube) is widely used by people on here so I’m sure it would work in yours.
When ever I have had my VX SS serviced by Holden or lately the local LS1 workshop, they have always put 6 litres in the VX, been doing that for the past 9 years. A quick check on the dipstick after a minute or so shows full, but a sit overnight in the garage the level is above full and just into the first bump or ripple on the dipstick. I was interested to see what the local workshop who do heaps of LS1’s would put in it when they did my first service with them, on checking the next morning it was exactly to the point Holden had been filling to, just into the first bump on the dipstick and the invoice had charged for 6 litres of oil.
keith reed From the HSV -vt 11 handbook. For optimum fuel economy, use 10/30 SJ GF2 engine oil.If this oil is unavailable use SG,SH or SJ grade engine oil. with viscosity of 20W/50 or 15W/40. (HSV) recommends Mobil 1 for the LS1 v8 engine). Service capacity. 5 litres approx (incl. filter)
VTR8Clubby From the HSV -vt 11 handbook. For optimum fuel economy, use 10/30 SJ GF2 engine oil.If this oil is unavailable use SG,SH or SJ grade engine oil. with viscosity of 20W/50 or 15W/40. (HSV) recommends Mobil 1 for the LS1 v8 engine). Service capacity. 5 litres approx (incl. filter)
That was written over 10 years ago. As said above, the dipstick was revised from VX so it took 5.5l+ to reach full. There are also SM grade oils out now(Edge for one) with much better qualities than the old grades.
Just because it’s in the service manual it doesn’t necessarily mean it’s the best for the engine.
Powered by vBulletin® Version 4.2.2 Copyright © 2022 vBulletin Solutions, Inc. All rights reserved.
Official LS1 oil capacity?
Quote: ssrodder Originally Posted by Never put too much oil in your system. As a matter of fact, less is better than more. You never want your crank coming in contact with excess oil. It slows the engine down and can cause faoming in your oil. Put in 5 quarts and some into your filter before you install the filter. Start the car and check for leaks and add oil as needed. I repeat, do not over fill.
Less is not better than more, when it comes to your engine. Oil capacity is 6.5 gt and if racing 7 qts is perfectly acceptable.. Oil Life algorithms are based on 6.5 qts. Baselines where changed in 2000 from 10,000 miles to 15000 miles. Baselines are the starting point for oil life percentage at 100 %. At 5 qts. you are 1.5 qts low…. not a good cold start suggestion… true that over filling is a no no… most people who change their own oil know how to remove the oil. Filling the filter is also common knowledge for most oil changers. I would never suggest anyone put 5 qts in their LS1. For me.. I put 6.5 qts and 1/2 pint in the filter. Its what I do with that extra .5 qt, of the 7 qts I use in a oil change.. you can’t get a whole pint in the filter but if you did it would be fine.
how much oil for 5,7L ?
Good question, they revised the capacity during VX production, the VX handbook says 5 litres including filter, when my VX SS had the new VYII pistons fitted back in 2003 they replaced the oil filler tube and dipstick with the revised set up, and changed the capacity to 5.5 litres, I have the part numbers of the revised set up if you need them and a Holden bulletin about the revision. Going back to your original question when my VX SS has been serviced by Holden and an independent shop I have had various quantities for oil used on the receipts varying from 5 litres to 6 litres, I guess it may depend on how well they let it drain before refilling. When they have supposedly put in 5.5 litres if you check it hot after stopping for a few minutes ie during a refuelling it is usually at the full mark or just a tiny bit over, if however you let it sit overnight and check it the next morning the level is usually above the full and just into the first ripple on the dip stick. If I was doing it myself I would let it drain very well and pop in about 5.5 litres, but I don’t think 6 litres would do any harm if it was drained well before refilling. I think the later Ls1’s were increased slightly again so maybe VY handbooks say 6.2 litres.
So you have finished reading the how much oil does an ls1 take topic article, if you find this article useful, please share it. Thank you very much. See more: ls1 oil type, ls1 oil weight, best oil for built ls1, 6.0 ls oil capacity, ls1 corvette oil capacity, ls1 10w30, 2002 pontiac trans am ws6 oil type, 2000 camaro ss oil type
