You are looking for information, articles, knowledge about the topic nail salons open on sunday near me how to clean a remington 1100 shotgun on Google, you do not find the information you need! Here are the best content compiled and compiled by the Chewathai27.com team, along with other related topics such as: how to clean a remington 1100 shotgun
Contents
What year did they stop making Remington 1100?
By 1995 most field-grade Model 1100s had been discontinued although others would continue to be occasionally offered on a limited basis. As I write this, Remington is offering six standard-production variants.
How good is the Remington 1100?
A used Remington 1100 is an excellent choice for clay pigeon practice or competition for the budget. Recoil is somewhat lower due to the gas system and lower recoil really helps when you’re firing many boxes of shotshells in a day.
Do they still make 1100 Remington shotgun?
A 50th Anniversary highly decorated version was introduced in 2013. Over four million Model 1100 shotguns have been produced. Several variations of the series—in 12, 20, and 28 gauges, and . 410 bore—remain in contemporary production.
How old is Remington 1100?
The 1100 was first produced in 1963. According to Remington history it was designed by Wayne Leak and R Kelley. It was the first auto loading shotgun to utilize a gas cycling operation.
What model replaced the Remington 1100?
In 1987 the new Remington Model 11-87 seemed to replace the Model 1100 as a 12-gauge autoloader.
Is Remington making the 1100 again?
What about the semiauto shotguns? After the 870 and 700, our next priorities are to bring back our revered model 1100 and the revolutionary V3 and VersaMax shotguns. We continue to evaluate the many other products and will make timely decisions on the direction to take as core products are up to top capacity.
Why is the Remington 1100 so popular?
It’s value as a skeet and trap gun is also what makes it so appealing to duck hunters: The 1100 is a tank that weighs over 8 pounds, hardly produces recoil, runs clean courtesy of its gas-operated system, and is affordable, though you will have to find one on the used market since the gun is not in production at this …
How many shells does Remington 1100 hold?
The shotgun is manufactured to hold four 2 3/4-inch shells in the magazine and one in the chamber; however, a plug must be installed in the magazine for hunting as it is illegal to hunt with more than three shells in the gun.
How many bullets does a Remington 1100 hold?
Remington 1100 Sporting, Semi-Automatic, 12 Gauge, 28″ Barrel, 4+1 Rounds.
What size shells does a Remington 1100 take?
in non-magnum guns is being produced by Remington. shoot three-inch magnum lead loads with a non-magnum gun.
How does a Remington 1100 work?
The 1100 is a gas-operated shotgun. Upon ignition of the primer, the powder is converted into a gas. This gas expands at an incredibly fast rate and pushes the wad and shot out of the shell and down the barrel.
What year is my Remington serial number?
A two or three letter code on the left side of the barrel identifies the month and year of manufacture. The first letter identifes the month, the other letter(s) identify the year.
Can you shoot steel shot through a Remington 1100?
Your 1100 Full Choke Barrel is perfectly safe for STEEL SHOT. Up to #2 steel.
Can Remington 1100 shoot 3 inch shells?
in non-magnum guns is being produced by Remington. shoot three-inch magnum lead loads with a non-magnum gun.
How to Disassemble, Clean, Lubricate, and Reassemble a Remington 1100/1187 Model Autoloading Shotgun : 19 Steps (with Pictures) – Instructables
- Article author: www.instructables.com
- Reviews from users: 19540
Ratings - Top rated: 3.1
- Lowest rated: 1
- Summary of article content: Articles about How to Disassemble, Clean, Lubricate, and Reassemble a Remington 1100/1187 Model Autoloading Shotgun : 19 Steps (with Pictures) – Instructables Remington suggests not disassembling the trigger assembly, and rightfully so as it is not necessary. Simply spray or manually apply gun cleaner (or Rem Oil) to … …
- Most searched keywords: Whether you are looking for How to Disassemble, Clean, Lubricate, and Reassemble a Remington 1100/1187 Model Autoloading Shotgun : 19 Steps (with Pictures) – Instructables Remington suggests not disassembling the trigger assembly, and rightfully so as it is not necessary. Simply spray or manually apply gun cleaner (or Rem Oil) to … How to Disassemble, Clean, Lubricate, and Reassemble a Remington 1100/1187 Model Autoloading Shotgun: This series is to demonstrate how to properly and fully dismantle, clean, lubricate, and reassemble an automatic gas-operated shotgun. For this example, I will be using a Remington 1100 model, which is basically just the older version of the Remingt…
- Table of Contents:
Introduction How to Disassemble Clean Lubricate and Reassemble a Remington 11001187 Model Autoloading Shotgun
Step 1 Collect Your Materials
Step 2 Make Sure Your Gun Is Safe
Step 3 Take Off the Magazine Cover
Step 4 Remove the Barrel
Step 5 Remove the Piston Piston Seal and Barrel Seal
Step 6 Remove the Bolt and Action Bar Assembly
Step 7 Detach the Trigger Assembly
Step 8 Remove the Spring Link
Step 9 Cleaning the Barrel
Step 10 Clean the Barrel Seal Piston and Piston Seal
Step 11 Clean the Trigger Assembly
Step 12 Clean the Action Assembly Bolt and Inside of the Receiver
Step 13 Lubricate
Step 14 Reassembly Link
Step 15 Reassembly Trigger Assembly
Step 16 Reassembly Bolt and Action Assembly
Step 17 Reassembly Piston Piston Seal Barrel Seal Barrel and Forearm
Step 18 Final Wipe Down
Step 19 Finished!
Be the First to Share
Recommendations
8 Comments
1100 History
- Article author: ccskeet.com
- Reviews from users: 41473 Ratings
- Top rated: 3.2
- Lowest rated: 1
- Summary of article content: Articles about 1100 History Updating …
- Most searched keywords: Whether you are looking for 1100 History Updating
- Table of Contents:
Remington Model 1100 – Wikipedia
- Article author: en.wikipedia.org
- Reviews from users: 46160 Ratings
- Top rated: 3.3
- Lowest rated: 1
- Summary of article content: Articles about Remington Model 1100 – Wikipedia Updating …
- Most searched keywords: Whether you are looking for Remington Model 1100 – Wikipedia Updating
- Table of Contents:
Contents
History[edit]
Design[edit]
Use[edit]
Users[edit]
References[edit]
Further reading[edit]
External links[edit]
Navigation menu
All hail the Remington 1100 – WV MetroNews
- Article author: wvmetronews.com
- Reviews from users: 12094 Ratings
- Top rated: 3.9
- Lowest rated: 1
- Summary of article content: Articles about All hail the Remington 1100 – WV MetroNews Updating …
- Most searched keywords: Whether you are looking for All hail the Remington 1100 – WV MetroNews Updating
- Table of Contents:
Remington 1100 deep clean
- Article author: smith-wessonforum.com
- Reviews from users: 17314 Ratings
- Top rated: 3.2
- Lowest rated: 1
- Summary of article content: Articles about Remington 1100 deep clean YEP. The 1100 has been my favorite shotgun for years ( I own 4). I’ve found the best way to clean the trigger assembly is liberally spray … …
- Most searched keywords: Whether you are looking for Remington 1100 deep clean YEP. The 1100 has been my favorite shotgun for years ( I own 4). I’ve found the best way to clean the trigger assembly is liberally spray … Remington 1100 deep clean, Smith and Wesson,Smith & Wesson, S & W, S&W, smith and wesson forums, Registered Magnum, 357 Magnum,44 Magnum,revolver,gunsmithing,reloading,Hello all. I inherited my Father’s Remington 1100 12 gauge that he purchased around 1967. He duck hunted with it and kept it clean but I doubt it ever had a deep cleaning of the trigger assembly. I pl
- Table of Contents:
Remington Model 1100 Cleaning –
Field and Stream Questions and Answers
- Article author: answers.fieldandstream.com
- Reviews from users: 36049 Ratings
- Top rated: 3.8
- Lowest rated: 1
- Summary of article content: Articles about
Remington Model 1100 Cleaning –
Field and Stream Questions and Answers
What to do? Clean the mag tube with a proper gun cleaner………or just use Remoil on a paper towel. Rub til the … … - Most searched keywords: Whether you are looking for
Remington Model 1100 Cleaning –
Field and Stream Questions and Answers
What to do? Clean the mag tube with a proper gun cleaner………or just use Remoil on a paper towel. Rub til the … - Table of Contents:
Remington Model 1100 Cleaning
Comment
Comment
Comment
Comment
Comment
Comment
Comment
Comment
Comment
Comment
Comment
Comment
Comment
Comment
Remington Model 1100 Cleaning –
Field and Stream Questions and Answers
See more articles in the same category here: Chewathai27.com/toplist.
How to Disassemble, Clean, Lubricate, and Reassemble a Remington 1100/1187 Model Autoloading Shotgun
The first part I usually clean is the barrel. To do this, soak a cleaning pad in your solvent, squeeze it so that it is not dripping, and push it through the barrel using your cleaning rod. Let the solvent sit for about 10 minutes.
WARNING: This solvent, and many others, are extremely flammable. Do not allow it near any sources of electricity or fire, and try not to let it drip on anything. It may ruin or damage anything it sits on for very long, including skin. I used a board and old towel to keep the solvent from dripping on my table.
After letting it soak, push the rod with the metal brush attached back and forth within the length of the barrel to loosen any built up grime. Then, use either a mop-tip or a dry cleaning pad at the end of the rod to wipe out the loosened crud. The last step should be repeated until the inside of the barrel shows no dirt clumps or specks, as shown.
Also, you should use a few drops of solvent and a cleaning pad or Q-Tip to clean the open base end of the barrel. You may want to use a nylon brush to get the larger clumps off, but be careful not to scrub too hard, or you’ll wear away the metal.
Make sure to check the gas cylinder (the ring attached to the barrel that goes around the magazine and action) for any grime build-up as well. Use solvent and a cleaning pad or nylon brush to clean it out. Check the gas holes (two small holes inside the gas cylinder) to make sure they are not clogged, and use a thin wire or tooth pick to unclog them, if they are.
1100 History
by Layne Simpson – Tuesday, July 23, 2013
Remington introduced its first semi-automatic shotgun in 1906. Called the Remington Autoloading Shotgun and then the Model 11, it was basically an American version of the Belgian-made Browning Auto-5 with a few differences, such as no magazine cut-off and a slightly different barrel design. Both were designed by John Browning. Just more than 850,000 Model 11s were built before it was replaced by the Model 11-48 in 1948. The streamlined receiver of the new shotgun was a sign of more modern things to come at Remington, but it still utilized Browning’s long-recoil design in which both the bolt and barrel traveled to the rear during firing.
It was no secret that a gas-operated shotgun had been under development at several American firearm companies, and it was commonly assumed that either Remington or Winchester would be first to introduce one. Instead, in 1956 Sears, Roebuck & Co. beat everyone to the punch with its new J.C. Higgins Model 60 in 12 gauge. Capable of handling all 2 ¾-inch loads, it was designed and built for Sears by the High Standard Mfg. Corp.
During the 1930s Remington had produced its Model 500 series of bolt-action and semi-automatic rifles in .22, of interest because of their interchangeable parts. That “firearm family” proved to be successful, and during the late 1940s management decided to expand on the concept by developing a series of shotguns and center-fire rifles with similar receivers and some parts commonality.
First to be introduced in 1950 was the Model 870 pump shotgun. It was followed two years later by the Model 760 center-fire rifle on the same type of action. The Model 740, a gas-operated rifle in .30-’06 Sprg., came along in 1955. The next member to join the family was Remington’s first gas-powered shotgun, the Sportsman 58. It was introduced in 1956, shortly after J.C. Higgins guns began to appear on the shelves of Sears stores across the country. Unlike the Model 60, which handled both light and heavy 2¾-inch loads, the Sportsman 58 was equipped with a “Dial-A-Matic” magazine cap with gas vents of different sizes. When a light target load was to be used, the cap was twisted to “L”; twisting it to “H” readied the gun for heavy field loads.
In 1959, Remington introduced its second gas-operated shotgun called the Model 878 Automaster. It was much like the Sportsman 58 except its self-compensating gas piston allowed the use of both light and heavy loads without making any mechanical adjustment.
The Sportsman 58 and Model 878 were designed by a team headed by L.R. Crittendon and, while many hunters and clay target shooters loved the two guns, Remington management acknowledged the fact that both fell short of perfection. For close to three years a young engineer by the name of Wayne Leek and his team consisting of Clark Workman, James Martin, R.P. Kelly and Charles Morse devoted a big part of their time to making improvements to the Model 878. They eventually came up with a shotgun that would go on to become second only in popularity to the Model 870 pump. When introducing it to members of Remington’s advertising agency in December 1962, Leek proudly stated “Gentlemen, this is the new Model 1100, and it’s going to revolutionize shotgun shooting.” And indeed it did.
Every person involved in the design of the Model 1100 was either a hunter or an avid clay target shooter, and some were both. One of their goals was to produce a shotgun that was easy to keep clean when subjected to high-volume shooting. The gas pistons of other shotguns were located inside the magazine tubes. Locating it on the outside of the tube of the Model 1100 made everything easily accessible for cleaning. And yet the compactness of the piston and its associated parts resulted in a trimmer fore-end than on other gas-operated guns. Moving the gas port of the barrel closer to the chamber where pressure was higher resulted in less buildup of propellant fouling in the system.
In those days a computer filled a good-sized room, and one of those along with an oscilloscope revealed that the new gas-handling design prolonged the recoil curve, thereby reducing perceived recoil compared not only to recoil-operated shotguns but to other gas guns as well. Guns that were function-tested after being frozen at 32 degrees below zero overnight never missed a lick. Oil-coated guns were dropped into sand pits, others were submerged in water. All came out shooting. The barrels of test guns subjected to sustained-firing became so hot their fore-ends began to smoke. More than half-a-million shells were fired.
To make sure the balance and feel of the new gun would satisfy as many shooters as possible, dozens of Remington employees were asked to shoot guns with varying stock dimensions. Their opinions and suggestions had a lot of influence on final stock design and shape. Pointing and swinging qualities of the gun were further improved by positioning its balance point a bit closer to the shooter’s forward hand than the rear. That was accomplished in part by making the receiver as trim as possible. Years ago, the late Don Zutz wrote that the Model 1100 receiver is actually shallower than some over-under shotguns. He was right. I have a Remington Model 3200 in 12 gauge, and its receiver at the standing breech is 0.280 inches deeper than the 12-gauge Model 1100. In fact, the Model 1100 receiver is both shallower and thinner than the receiver of my 1960s-vintage Winchester 101 in 20 gauge.
The stock and fore-end of early guns had impressed checkering and were given an extremely durable polyurethane finish originally developed by DuPont for use on bowling pins. To illustrate its toughness, Remington produced a promotional film starring employees Earl Larson, Jack Heath and Dick Baldwin in which stocks set up in a bowling alley were repeatedly knocked asunder. It also had a special rack installed on the roof of the factory in order to expose dozens of stocks to the elements for several weeks.
The Model 1100 was announced in January 1963 in 12 gauge only at $149.95 for a plain barrel and $174.95 for a barrel with ventilated rib. At the time, the plain-barrel Browning Auto-5 was selling for $154.95 and Winchester’s lightweight Model 59 with its fiberglass-reinforced barrel was going for $149.95. Model 1100s in Field, Skeet and Trap configurations were chambered for the 2 ¾-inch shell but a Magnum Duck Gun with 3-inch chamber was also offered. During the next year, 16 and 20 gauges were added to the Field and the Skeet guns. The 12-gauge Deer Gun with adjustable sights and 22-inch smoothbore barrel made its debut in 1966. Three years later a 20-gauge Deer Gun was introduced.
In 1969 the first 1100s in 28 gauge and .410 bore were built, both on a smaller receiver. Field guns had stocks of mahogany, while Skeet guns wore walnut. The smallbore Skeet guns were later offered individually but, during the first year of production, they were available only as a sequentially serial numbered pair in a hard case. Production of the Matched Pairs ceased in 1970 with 5,067 built, although the remaining stock lasted until 1972.
Through 1969, all 20-gauge Model 1100s were built on the 12-gauge receiver. A Lightweight version with a mahogany stock was offered, but it still weighed only a few ounces less than a 12-gauge gun. Skeet shooters absolutely loved the weight for its reduction in recoil, and even today those guns bring a premium on the used gun market, if one can be found.
Trap shooters probably welcomed the new Model 1100 even more. Whereas skeet shooters use light loads and prefer to shoot the lighter-kicking 20, 28 and .410 shells, trap shooters shoot only heavy 12-gauge loads. Even today Model 1100s continue to be used by several of the trap shooters at my gun club.
The standard 12-gauge Model 1100 weighed 7 pounds, 8 ounces, while the magnum version weighed a quarter-pound more. Target shooters and hunters were quite happy with those weights but most hunters considered the 20-gauge gun on the 12-gauge receiver heavier than necessary. And since hunters were buying far more shotguns than were clay target shooters, the Lightweight 20 on the 28/.410 receiver was introduced in 1970. To my knowledge, the Model 1100 and the Model 11-48 are the only two semi-automatic shotguns ever produced in 12, 16, 20, 28 and .410.
Jay Bunting of Remington, who shot skeet with 1100s for many years, recently pointed out to me that the Lightweight 20 was made in two versions. The LW-20 offered from 1970 to 1976 had a short barrel extension much like the Model 870, while the LT-20, which replaced it in 1977, had a standard-length extension with integral ejection stud and an enlarged ejection port. Both versions were originally chambered only for the 2 ¾-inch shell, but in 1971 the LT became available with a 3-inch chamber.
The one-millionth Model 1100 came off the production line in 1972. During that same year, left-hand 12- and 20-gauge Field and Skeet guns with the ejection port on the left side of the receiver and the safety reversed for the southpaw shooter were introduced. Model 1100 production reached the 2,000,000 mark in March 1977. The left-hand gun in 20 gauge was discontinued in 1978 and the 20-gauge Deer Gun on the 12-gauge receiver was replaced by one on the 28/.410 receiver. Also during that year, the mahogany stock of the LT-20 Field was replaced with walnut.
The standard Field gun was designed to function only with the 2 ¾-inch shell while the Magnum was intended exclusively for the 3-inch shell. In those days it was quite common for a shooter to own one Model 1100 and several barrels with different choke constrictions. To add a bit more sales appeal to the Magnum gun, Remington modified it in 1979 so it could be used with an extra barrel chambered for the 2 ¾-inch shell.
Model 1100 production reached 3,000,000 in 1983. That was also the year a left-hand version of the Deer Gun in 12 gauge was introduced, as was the Special Field in 12 and 20 gauges with straight-grip stock and stubby 21-inch, ventilated-rib barrel. The year 1985 saw the introduction of the Special Purpose Magnum, an economy-grade waterfowl and turkey gun with a birch stock and dull blued finish.
Selling extra barrels for its shotguns had long been quite profitable for Remington and the company resisted offering screw-in chokes long after they became available on guns from other manufacturers. The Rem Choke system was introduced in 1986.
The Model 11-87-capable of handling both the 2 ¾- and 3-inch interchangeably and introduced in 1987-did not replace the Model 1100, but the passing of each year brought a reduction in the number of Model 1100 variations offered. Interchangeability matters not to clay target shooters, but when steel shot became a requirement on waterfowl, guns that could not take both 2¾- and 3-inch shells lost market share. By 1988 only the Special Field was offered in 12 gauge although Field guns in 20, 28 and .410 as well as Skeet guns in those chamberings were still cataloged. When the 1991 catalog was published only the “Small Gauge” Field gun in 20, 28 and .410 and the 20-gauge Youth Gun with short length of pull and a 21-inch barrel made the cut. By 1995 most field-grade Model 1100s had been discontinued although others would continue to be occasionally offered on a limited basis.
As I write this, Remington is offering six standard-production variants. Twelve-gauge guns include: the Competition, with fancy walnut stock and 30-inch backbored barrel with lengthened forcing cone; the Competition Synthetic, with a stock quick-adjustable for cast, length of pull and comb height; the Classic Trap, with high-comb walnut stock and 30-inch Rem Choke barrel; and the Tactical, with black synthetic stock, 22-inch ventilated-rib barrel and eight-round magazine. The Sporting is offered in 12 and 20 gauges while the Premier Sporting, with its fancy walnut and nickel-plated receiver and gold inlay, is available in 12, 20 and 28 gauges and .410 bore. Available during 2013 is the 12-gauge, 50th Anniversary Limited Edition with B-Grade walnut, 1963 prefix serial number and machine-engraved receiver.
The Model 1100 is more prone to parts breakage than some designs, but that mattered less to hunters than to those who shot many thousands of rounds each year on the trap and skeet fields. Even when a part broke, its replacement was cheap and usually easy to install. Most clay target shooters kept on hand spare parts such as the action spring, barrel seal, link and piston seal. Several of the guys at my gun club competed during the glory days of the Model 1100, and one recently told me that he usually replaced the action spring about every 12,000 rounds, whether it needed it or not.
The Model 1100 was an even bigger hit among hunters. For as long as I can remember, my father hunted quail several days each week of the season and while he was a double man at heart, the gun he used most during his last 25 years in the field was a LT-20 skeet gun. He gave it a good cleaning every couple of months and the only part that ever broke was a barrel seal, an inexpensive rubber O-ring that slips over the magazine tube.
The autoloading shotgun market is much broader today, with some guns better in ways than the Model 1100-including the improved Remington Model 11-87-but few manufacturers have managed to duplicate its handling qualities. The fact that upward of 4,000,000 have been sold since its introduction half a century ago is proof that Wayne Leek and his team got it right.
Remington 1100 Review
The Remington 1100 is an older, gas-operated, semi-automatic shotgun. Even though the design is a bit outdated, it’s still in use today and there are TONS of used ones out there. Produced since 1963, the 1100 is well known for helping to reduce recoil due to its gas-operated action, and for its reliability. . .most of the time. If you need parts for your Rem 1100, check out Brownells.
Video Review
Build Quality
This isn’t a fair comparison to new Remingtons, but I have 2 1100’s: a 63-68 2 3/4″ (not sure, as their lettering code wasn’t in practice during that time period), and a 3″ Magnum from 1974. Both of these shotguns have been hunted very hard, and lost most of their finish wherever parts moved or metal was handled frequently. The stocks on these older versions have OK grain and better checkering than normal bargain-priced shotguns. There’s also engraving on the bolt and receiver classing things up a bit. The materials available back then for buttstocks have completely deteriorated, but that’s hardly Remington’s fault. New buttpads are very easily installed, as the 1100 uses a very common Remington buttpad size.
Reliability
Experiences vary on reliability. The 1100 relies on a rubber o-ring at the front of the gas system and that o-ring can break down with age, use, and abuse. Some people find their 1100’s run like a top and use their O-rings for decades, whereas others have issues unless they keep their o-rings in great shape. Because there is no way to moderate how much gas gets into the system, you can’t setup the system to work well with both low-powered shotshells, and high powered ones, so the lowest power target loads may not cycle your action.
O-Rings for the 1100 are pretty cheap, but they’re also supposed to work with a #21 Viton o-ring if you can’t wait for the Remington version in the mail.
1100’s are offered in 2 3/4 version as well as 3″ magnum options and here’s where a semi-automatic like the 1100 loses a bit of versatility: they’re generally setup to work well with 1 power of shell. While an 870, or any other pump action shotgun will happily blast light and heavy shells alike, semi-automatic shotguns like the 1100 work best with one power factor of shell. These days, the 1100’s sold by Remington are built for 2 3/4, except the G3. You should be looking at the Versa-Max if you want a Remington semi-auto shotgun that can take different lengths of shells. You can gain versatility with the 1100 by swapping barrels, but who wants to buy or have extra barrels hanging around if a single shotgun with a single barrel can do it all?
Usability
The Remington Model 1100 uses the same crossbolt safety as the 870, and a small side-charging handle.
Loading shells is somewhat slowed because of a little silver tab that unlocks the loading gate. Brownells sells an “Easyloader” that replaces the little silver tab with a big ramp that’s a lot easier to hit. The silver locking tab really does suck compared with a standard loading gate, so I’d replace it if you care at all about reloading quickly and easily.
The advantage to having the bolt hold open on that last shot is that you could potentially throw a shell directly into the side port, hit the release and have a hot round in the chamber really quickly.
Without any tube extensions, the 1100’s I have will hold (4) 2 3/4″ shells in the tube and 1 in the chamber. There are lots of extensions available if you need more.
The 1100 should be cleaned a bit more often compared with more modern shotguns as the gas system collects crud faster. I’ve found that in and around where the gas ports meet the tube collects the most carbon and crud.
Disassembling the 1100 is easy for the first bit: pulling off the barrel and stock only requires that you pull back the bolt and unscrew the magazine cap and have the bolt locked back. This is all you have to do most of the time, as this exposes the gas system, o-ring, and cycling gas parts that will get cruddy after shooting a lot or shooting dirty ammo. The way parts are mounted inside the receiver is decidedly old tech, with circlips, pins, springs, and levers somewhat exposed inside the receiver. It can also be difficult to clean the inside of the receiver, compared with more modern semi automatic firearms. Pipe cleaners really help get into the nooks and crannies in the receiver that can be impossible to reach.
Hunting
Hunting with an 1100 is extremely natural, at least for me. The stock is . . .perfect and will come up naturally for anyone used to hunting with 870’s. I don’t know if that’s because the stock is a great design, or if I’ve just spent so many hours hunting with similar stocks that I’ve got used to it, but it feels as comfortable as a favorite old t-shirt.
The crossbolt safety clicks, which might scare game at close range, so there’s that. The rest of the 1100 is extremely simple, with nothing else to get in the way of a good hunt. I run my shotguns without slings to make for an easier exit from blinds, but you could get a magazine cap sling point and screw another into the buttstock if you prefer. The 1100 is somewhat heavier than some newer shotguns, but the weight also helps make it a softer shooter.
If you want to hunt deer with your 1100, you may want to pick up a rifled barrel with sights(Remington #29570) or a cantilevered scope base (Remington #26595), if you can find one. That way, you can use sabot slugs for more accuracy and better ballistics. You can always use a regular slug and smooth barrel if you’re going to be in closer but the sabot rounds through a rifled barrel can be quite a bit more accurate.
Trap/Skeet/Sporting Clays
A used Remington 1100 is an excellent choice for clay pigeon practice or competition for the budget. Recoil is somewhat lower due to the gas system and lower recoil really helps when you’re firing many boxes of shotshells in a day. Used Remington 1100’s are a reasonable way to get into trap/skeet shooting with a semi-automatic. It’s easy to blow $2k+ on a really nice gun, but a used 1100 can get you started without breaking the bank.
Remington 1100 for 3-Gun Competition
Semi-automatic, tube-fed shotguns can be pretty pricey but used 1100’s are again a very reasonably priced option. With an easy loader and shotshell carrier, it’s not bad for the price. After that, you may want to consider:
Larger bolt handle
Magazine Tube extension (more for American readers, as we’re limited to 5 rounds for semi-auto centerfire rifles in Canada)
Oversized safety
One of my buddies runs an old Remington 1100 in 3-gun and doesn’t give up much by running such an old gun at all. You might also want to check out NicTaylor’s take on using the Rem 1100 for competition.
Overall
Even though the design on this shotgun is ancient, it is no slouch in use and you’re not giving up much to the newer shotguns. If you have a load that works for your 1100 and don’t need the versatility of modern shotgun designs, you’re not missing out on much for newer tech. Keep a few #21 o-rings handy and you’re good to go!
So you have finished reading the how to clean a remington 1100 shotgun topic article, if you find this article useful, please share it. Thank you very much. See more:
