Top 19 How To Cock A Crossbow The 67 Detailed Answer

You are looking for information, articles, knowledge about the topic nail salons open on sunday near me how to cock a crossbow on Google, you do not find the information you need! Here are the best content compiled and compiled by the Chewathai27.com team, along with other related topics such as: how to cock a crossbow pulling crossbow back by hand, how to load a crossbow, best crossbow cocking device, barnett crossbow crank, how to draw a crossbow easy, crossbow cocking rope amazon, cocking a crossbow with one hand, crossbow rope cocker

Contents

Can u cock a crossbow by hand?

It’s important to cock your crossbow the same way each time. If you do choose to cock your crossbow by hand it’s important to develop a repeatable method, and develop a method with proper posture so as not to cause injury to yourself. This will encourage a correct string position, and will also help with back strain.

How much strength does it take to cock a crossbow?

The main thing is that the greatest strength (80 lbs) is required at the beginning of cocking, when cocking is easiest (comfortable).

Should the safety be on when cocking a crossbow?

Do not take the safety off unless an arrow is mounted in the crossbow in the shooting position and you are ready to shoot.

Is a 150 lb crossbow good for hunting?

With little exception, any crossbow in that range should be adequate to kill a whitetail deer at moderate ranges. That said, most of the better hunting crossbows are in the 150 to 175 pounds range, with a few topping out over 200 pounds. In general, bigger is better—or in this case, faster.

How powerful is a 175 lb crossbow?

175 LBS CROSSBOWS

Your shots can reach up to 400 km/h (360 FPS). The 175 lbs camo compound crossbow is a high quality weapon with excellent power. It is ideal for hunting game or wild boar, and can be used with a bandolier so that it can be armed more easily.

Is 330 fps good for a crossbow?

A crossbow that shoots a bolt at 330 fps can reach 33 yards in 0.3 seconds. So, to answer your question, you can gain around 7 yards of what many xbow hobbyists consider maximum shooting distance by using a 400 fps xbow vs a 330 fps xbow.

Can you dry-fire a crossbow?

In general, it is not a safe practice to dry-fire your crossbow. Your crossbow is equipped with a DFI (Dry-Fire-Inhibitor) mechanism. In the event you forget to load an arrow into the crossbow but attempt to take a shot, the string will be caught by the DFI, which helps to prevent damage to the bow assembly.

What is the riser on a crossbow?

Riser. The flat smoot portion of the crossbow where the arrow sits when cocked, and where the string glides along as the arrow is fired.

What is a latch on a crossbow?

latch. Designed to capture the string when the crossbow is cocked (drawn), the latch holds the string in place until it’s released by the trigger. limbs. Can be compound or recurve.

Should you leave a crossbow string?

You don’t have to unstring your crossbow every time you use it, but it will appreciate having its limbs relaxed at least between seasons when you aren’t using it. The #1 concern is that you NEVER leave the string on if your bow is exposed to high heat, such as in the trunk of a car in the summer sun!”

Do crossbows lose power?

We could talk about specifics and comparisons all day long, but the bottom line is: Compared to heavier and longer arrows from vertical bows, crossbow arrows drop like a rock and lose energy quickly after leaving the rail.

Why do many hunters choose a recurve crossbow instead of a compound crossbow?

Many hunters choose the recurve crossbow because of its simplicity. It is easier to replace the string on a recurve crossbow than on a compound crossbow. Recurve crossbows are easier to work on, allowing the shooter to do more maintenance.

Which of the following describes the latch on a crossbow?

Which of the following describes the latch on a crossbow? It captures the string when the crossbow is cocked and holds the string in place until it’s released by the trigger.

Which part of the crossbow is designed to prevent the arrow from releasing accidentally?

Trigger mechanisms utilize two basic designs. It is either located directly underneath the latch that holds the string in a cocked position or the latch mounted behind the trigger. A safety prevents accidental release of a bolt and may engage manually or automatically once a crossbow is cocked.

What are the two most common types of crossbows?

The most common types of crossbows are compound and recurve.

How To Cock a Crossbow With a Rope Cocking Device

How To Cock And Load A Crossbow – YouTube

Article author: www.youtube.com
Reviews from users: 40883 Ratings
Top rated: 3.6
Lowest rated: 1
Summary of article content: Articles about How To Cock And Load A Crossbow – YouTube Updating …
Most searched keywords: Whether you are looking for How To Cock And Load A Crossbow – YouTube Updating How to cock a crossbow with a cocking rope and how to load a crossbow safely.crossbow, cocking a crossbow, loading a crossbow, parker, mission crossbow, parker croassbow, 10 point crossbow, barnett crossbow, loading a bolt, crossbow safety, cocking rope, crossbow cocking rope, cocking rope for a crossbow, crossbow cocking device, crossbow cocking with a rope, loading a crossbow bolt
Table of Contents:

Article author: www.bowhunter-ed.com
Reviews from users: 7172 Ratings
Top rated: 3.3
Lowest rated: 1
Summary of article content: Articles about Cocking the Crossbow Updating …
Most searched keywords: Whether you are looking for Cocking the Crossbow Updating
Table of Contents:

Course Outline

Send Us an E-mail

Cocking the Crossbow

Article author: www.hunting-bow.com
Reviews from users: 26852 Ratings
Top rated: 4.8
Lowest rated: 1
Summary of article content: Articles about Archery Lesson: How to Cock a Crossbow | Hunting-Bow There are three main ways to cock a crossbow; bare hands, rope cocking devices or integrated rope cocking devices which take off more or less 50 … …
Most searched keywords: Whether you are looking for Archery Lesson: How to Cock a Crossbow | Hunting-Bow There are three main ways to cock a crossbow; bare hands, rope cocking devices or integrated rope cocking devices which take off more or less 50 … How to cock a crossbow isn’t only a technique to load your crossbow before firing, it can also help you to determine which crossbow you are looking for.
Table of Contents:

Cocking Your Crossbow by Hand

Many shooters prefer to cock their crossbow by hand. It is the most economical method as no extra gadgets are required. It is also the quickest method possible, which may come in handy if you are given the opportunity for a follow-up shot.

Cocking by hand does have its downside though, and there are two serious issues to look at if you choose this method. The first negative in cocking by hand is the tremendous strain it will put on your back. Cocking the crossbow by hand offers no mechanical advantage to the shooter.

If you are target shooting and not hunting, the continuous repetition of bending over and pulling against poundage ranges of 150- to 200 pounds will eventually fatigue you. This may discourage you from continuing or worse yet, it could cause an injury to your back! Also, many of today’s compound crossbows have very narrow axle-to-axle widths. As the string is being pulled back, the fingers can be pinched between the string and the barrel making for a very uncomfortable experience.

Another issue to consider is that it’s very common, and very easy, to pull the string with an uneven force, which will pull the string off-center and will throw your shot off by several inches.

If you do choose to cock your crossbow by hand it’s important to develop a repeatable method, and develop a method with proper posture so as not to cause injury to yourself. This will encourage a correct string position, and will also help with back strain.

With your foot placed well into the cocking stirrup, slowly bend down, bending both legs at the knees as much as possible as you bend your back. Extend your arms, keeping them straight, and grip the string with three or four fingers. It should be noted that the fewer fingers you use the better, as they will be pinched at the peak of the draw stroke.

Hopefully, repetition will encourage a repeatable procedure. Pay very close attention to your finger movement during this part of the process. It will be difficult to do, because your head should be looking forward, not down toward the ground. Your spinal posture is the most important thing to consider; therefore, as you re-assume the standing position during the cocking of your crossbow, your eyes should look straight ahead or slightly upward.

The consistent accuracy of your shots will ultimately tell the tale of your ability to correctly hand-cock your crossbow, and your ability to perform the identical routine each time. Remember, just as in shooting, cocking practice makes perfect.

Many folks that hand cock their crossbows will mark the string with a permanent marker to ensure that the bow is cocked uniformly. With the bow relaxed, mark the top of the string directly over each side of the barrel. When the bow is fully cocked, these reference points can be used to assess whether the cocking stroke was uniform.

Cocking your crossbow by hand is difficult at best, but very doable if performed properly.

Shop Sportsman’s Guide now for a great selection of Crossbows and Accessories, including cocking aids!

(Article courtesy of Crossbow Magazine, http://www.crossbowmagazine.com/)

Click here to subscribe to Crossbow Magazine!

Cocking a Crossbow, the Right (and Wrong) Way • Advanced Hunter

As an affiliate, I may earn a commission from purchases made through the links on this page.

Success on a hunt often comes down to the little things. A small variance like how you cock a crossbow can make the difference between bagging game and going home empty-handed.

Learning to cock a crossbow the correct way is important. An improperly cocked crossbow can cause significant accuracy problems when you fire a bolt. Developing a proper cocking technique will help you achieve consistent and accurate bolt flight. If a bolt is released with uneven energy, it will end up off-target downrange.

In this guide, you will learn the correct way to cock a crossbow, what mistakes to avoid while cocking, and how to use common cocking devices to make it easier to get the job done.

Basic Steps of Cocking a Crossbow

It takes practice and repetition to master any skill. Learning how to cock a crossbow is no exception to this rule. The same basic process applies to recurve, compound, and reverse compound crossbows alike. Cocking devices can make it easier to ready your crossbow and improve accuracy, but similar basic steps must be followed whether you do it manually or use a cocking device.

Step 1: Move the safety to the “fire” position

The safety is usually located on the side of your crossbow or can be found on the rear of the sight bridge.

Step 2: Place the ball of either foot in the cocking stirrup

When you’re manually cocking a crossbow, putting the ball of your foot in the stirrup will help prevent slippage while cocking.

Step 3: Pull the string back

Bend over the stock and manually draw the string back. Using a cocking device is also an option. Draw the string evenly along both sides of the barrel to the latching and safety mechanism until it is cocked in place.

Step 4: Engage the safety again

Once your crossbow is cocked, switch the safety off the fire position. Some models will engage the safety automatically. It’s very important to check your crossbow manual to see if you need to engage it manually before cocking your crossbow.

Crossbow Cocking Tips

Here are a few points to be aware of while cocking your crossbow:

Manually pulling back the string requires putting your hands, arms, legs and lower back into the pull. If you cock a longer recurve crossbow, however, you can’t simply bend over the stock to do it. You will need to lean to the side because the stock is too long for you reach the string.

If you cock manually or use a cocking device, you must take care to maintain the string in the same evenly centered trigger-latch position each time you cock. Mark the string with a marker on each side of the rail for a visual cue of a centered string.

This will foster consistent accuracy downrange. Using a cocking device rather than doing it by hand will make it easier to ensure consistent string placement.

Always keep the crossbow’s front end pointed in a safe direction downrange while cocking. You should follow this safety measure even if you do not have an arrow loaded, in case of an accidental dry fire.

Never switch off the safety unless an arrow is mounted in a shooting position on the crossbow and you are ready to shoot.

DON’T Do This While Cocking a Crossbow

Shooting straight every time requires you to cock the crossbow straight every time. When a crossbow is cocked and loaded, the serving must be centered so that equal lengths are on either side of the rail. Having it off center even by a fraction of an inch can mean that the impact point for your bolts will end up being off by several inches in one direction or another. Longer downrange shots will take your bolt more off-target.

Relying too much on your dominant arm can cause your serving to become off-center while cocking. Most people have a dominant arm, with more strength than the other, which can lead to that arm pulling the string faster, disrupting the balance. One solution to this problem is to mark the serving with a pen or marker on each side of the rail while the string is at rest. These marks will act as a visual guide as you pull back the string and help keep it equal on each side.

Never dry fire your crossbow just to practice cocking. If you’re going to cock the crossbow, plan on taking a practice shot. Dry firing nearly always causes severe damage to the crossbow. If you don’t want to fire a bolt, you need to learn to how to uncock the crossbow without damaging your bow. A rope cocking aid can help you uncock a crossbow without shooting it. It will absorb the force of the string when it is released, instead of having that energy redirected into the crossbow itself.

Cocking a Crossbow with Cocking Aids

Cocking a crossbow by hand can be tough if you deal with disabilities or other strength and mobility issues. Modern crossbows can feature draw weights exceeding 150 lbs., and it’s easy to misalign the bow while trying to pull back the string by hand.

Using cocking devices can make it easier to get your crossbow primed and ready for action. It centers the string better and requires less strain on your arms, legs, and back. Two popular cocking aids include rope cockers and cranking devices.

Rope Cockers

Rope Cockers operate like pulleys. Once you get the cocker into position and place your foot inside the stirrup, you pull the rope cocker pull handles upward until the string is cocked in place.

Using a rope cocker requires much less physical effort than cocking a crossbow by hand. It removes as much as 50 percent of the draw weight, which limits the strain on your muscles and joints. You get great cocking consistency with rope cockers and they also render dry fires virtually impossible.

One drawback with some rope cockers is that the rope is long. You may need to adjust the rope’s length to match your cocking stroke so that you don’t cock the bow crooked or risk a shoulder injury trying to pull the string back. Placing a guideline in the center of the rope will also help prevent crooked cocking.

Cranking Devices

A cranking device is essentially a winch. Some crossbow models integrate a cranking device into the bow itself. You can also get it as a separate device. To cock a crossbow using a crank, simply wind the handle until the string latches in place.

Much like a rope cocker does, a cranking device reduces the draw weight and physical strain that comes with manually cocking a crossbow. This lets you pull the string more evenly and ensure the serving is centered.

One drawback to using a cranking device is that it takes longer to set it up and pull the string back. If you are pressed for time, cocking a crossbow with a cranking device will slow you down enough to where you may want to consider a different option.

Conclusion – Why I Love Rope Cockers

Cocking a crossbow the right way comes down to learning correct habits and using the right cocking aids when necessary. This is why I love the simplicity and repeatability you get with a rope cocking aid. When you master cocking a crossbow with rope, you can count on enjoying optimal downrange performance and accuracy every time you fire your bolt.

How to Cock a Crossbow

How to cock a crossbow isn’t only a technique to load your crossbow before firing, it can also help you to determine which crossbow you are looking for. In other words, selecting how much weight you are willing to cock, should lead you to a specific purchase.

For instance, if you want the minimum cocking weight because of a back injury, you have to eliminate all crossbows without cranking devices compatibilities. This article will overview how to cock main brands and how to uncock a crossbow meanwhile giving good tips about how to choose your next crossbow.

There are three main ways to cock a crossbow; bare hands, rope cocking devices or integrated rope cocking devices which take off more or less 50% of the cocking weight and finally cranking devices that take off up to 90% of the cocking weight.

There is also another way, not really recommended, if you have to go there you might have the wrong crossbow for you. You can sit on your butt, put your feet on the riser and cock it the same way as using a rope cocker. The difference is you can lean on your back when you get to the difficult point of reaching the latch.

These techniques apply to all types of crossbows. Either you choose a recurve crossbow, a compound crossbow or reverse limb crossbow, knowing what you are cocking can help you to select a perfect match for you.

For instance, you can choose the reliability of a recurve but you must know that they are the toughest to cock on the market. In the middle, you have the compound crossbows which vary a lot toward their quality and their cocking weights.

Finally, if you want the best of two worlds, not that I’m saying that reverse limb crossbows are better than two previous one, but simply because they combine low cocking weight with impressive velocities.

Two things are universal with crossbows. You must be certain that your foot is perfectly seated in the foot stirrup before any action concerning cocking the string. This simple detail void many injuries or damage to the crossbow. Secondly, you must disengage safety before cocking your crossbow. Those two actions are necessary for any kind of crossbows.

Let’s have a look at the different technique with their advantages and disadvantages.

Cocking Bare Hands

Pros

Fast operating technique

Cons

Can be hard on fingers

A chance to cock uneven

Chance to dry-fire

The acidity of fingers might damage the string

No doubt, the fastest technique, however, the most susceptible to generate mistakes of using. Consistency is key for precision and reliability. Cocking unevenly the string into the latch could lead to dry-firing and cause major damage to the limbs. The energy stored in the limbs must be transferred to the bolt. In dry-firing situations, the energy comes back to the limbs creating undesired vibrations causing possible little cracks that could lead to breaking the limbs. A good advice if you want to cock bare hands your crossbow is to mark the string with two lines along the flight track so when you are pulling the string you know exactly when the string is centered into the latch. You can release only when you hear a click into the trigger box. The purpose of cocking evenly the string is to make sure that you have the same amount of pressure in both limbs. The result of that consistency will lead to more consistent accuracy.

Tip: Eliminate Reverse Draw Limbs Crossbows from cocking bare hands. Their specific design isn’t meant to be draw bare hands. The risk of injuring (pinching) your fingers is too high considering the tight angle to reach the trigger box.

Cocking with Rope cocking devices

Pros

Less expensive than cranking device

Easy to use and quiet

Take more than 50% off the weight

Helps greatly to keep consistent accuracy

Chances to dry-fire are minimal

Cons

Rope cocker if wrongly adjusted might be hard to cock

Replacement would be necessary if the retractable system fails

As you saw in the first video, the rope cocking aids are the second and most popular system to cock a crossbow at an affordable price. There are many different rope cocking devices branded and patented by manufacturers.

Rope cocking

The first on the list is the rope cocking device. Every Brand offers their own rope cocker. Luckily, they all fit other brands, in general, no matter which crossbow you have. These rope cocking aids come in standard length which must be adjusted to your height to avoid you having both arms at maximum height and not be able to cock the crossbow. Using a system of a pulley, the rope takes off more than 50% of the cocking weight. This means a cocking weight of 165 pounds would be lower and under 82.5 pounds to cock it. The fact that you are leaning over the crossbow and pulling up allows you to use stronger muscles like abdominals, back muscles and leg muscles. These combined with your arm muscles create a lever to pull up the string. Make sure that the hooks are nicely next to the flight track by pushing them with your fingers and try to apply the same amount of force in both hands to bring evenly the string into the trigger box.

Probably the most reliable even if something breaks, the parts are more easy to change than other rope cockers.

ACUrope

The portable and retractable rope cocker. Like other rope cockers, it reduces by 50% the cocking weight of the crossbow. An easy to carry cocking device with an integrated retractable cord that allows you to quickly use it and put it back in its case. You can slide the two handles into one and other making a more compact setup to carry while hunting.

A setback for the ACUrope would be the lack of adjustments when you are pulling up. Standard rope cocking length is adjustable to be more efficient when you want to cock it as we saw above. The ACUrope is more complicated to adjust if the standard length doesn’t suit you. In case it breaks, look for the warranty otherwise, you will need a new one.

Dedd Sled 50, Sled or the Dedd Sled

No matter which one, this rope cocking aid is built to increase consistency while cocking the string. The fact that the hooks are attached to each other by a bridge increase your consistency to pull evenly the string. This cocking device is more simple to use because you don’t have to manipulate too many parts.

The Sled is an excellent rope cocker for reverse draw limbs crossbows.

The following video shows exactly how to use the Dedd Sled 50. It can be used on other models than in the video and other brands produce their own. The way it works, you have to put the string into the grooves of the sled and pull until you reached the trigger box and hear the click sound or the safety is back on.

The TenPoint Dedd Sled 50 has a slight difference in which it works with a pulley to ease a bit more the pulling of the string and you also have to put the cord in the back of the stock

The structure is strong but in case it breaks, the Dedd Sled will need a replacement.

ACUdraw 50 or 52

This rope cocking device is a fully integrated cocking system that comes with some models or you can install on some of them. For the matter, I will show you a Tenpoint video showing perfectly how the system works. The system decreases the cocking weight by 50% for the ACUdraw 50 and 52% for the ACUdraw 52.

No need to search for it, it’s an easy to use cocking system with a retractable cord. The magnets inside allow you to put the hooks and handles out of the way when you prepare yourself for firing.

However, a warning is really important to know. The magnets inside may interfere with the safe operation of pacemakers or other medical implants.

Cocking with Cranking Devices

Pros

Almost effortless by lowering cocking weight

Cocking consistency for more accuracy

Dry-firing virtually impossible

Fully integrated and easy to use

Made for any hunters but excellent for disabled or back injured people.

Cons

For some, not fast enough

Clicking sounds can be noisy for some

More expensive

Cranking devices are usually integrated with a removable handle. That handle works with a cranking mechanism lowering the weight up to 5 pounds in some cases. The handle in most models is removable from the shooter sight for firing. Each brand introduces their crank cocking mechanism for each of their models. Here are some models to let you know what is on the market.

ACUdraw

A fully integrated cocking system without the annoyance of adjusting the length of your cords. Remove the claw from its storage position (the claw is based on the Dedd Sled rope cocker for maximum consistency) and bring it to the string in a string slide position. Install the handle, engage the safety claw and start to crank clockwise until you reached the trigger box and hear a clicking sound telling you that the safety is now engaged.

Don’t forget to replace adequately the claw into its storage position as the video shows you.

The mechanism inside the ACUdraw is pretty simple increasing its durability which is an important factor considering its price.

An excellent device to allow the maximum of shooters enjoying the use of any crossbows. There is nothing worst when you desire to shoot and can’t because the draw weights are too much to cock.

Barnett cranking device

Barnett offers a crank cocking device mounted on the buttstock of their crossbows. This is probably a negative aspect of the system. It means it’s a removable cranking device and not fully integrated into the crossbow. However, the system is really simple and easy to use and install.

They also offer a fully integrated version which, according to me, make more sense in a hunting situation. This version is specific to each model, this means that every model has its own way of installing the fully integrated cranking device.

It goes to personal preferences concerning both cranking devices because both do their job perfectly.

Mission removable silent draw cocking device

Mission from Mathews offers something different toward cranking device. They are the only one offering a soundless mechanism when cranking the string. The sound produced by the crank mechanism in other cranking device is inhibited with the Mission RSD cranking device. This is a small detail but for some hunters, it’s huge to keep their camouflage spotless.

It’s an easily removable cranking device which decreases the annoyance of having it in your way when you prepare to shoot.

Few actions are necessary to use the device properly which could slow you down while using it but the consistency brought by its efficiency and making almost effortless cocking your crossbow worth the time.

Ravin cranking device

Working in conjunction with the Trac-Trigger Firing System, the Versa-Draw cocking device is fully integrated into the sleek stock design. The main advantage is cocking and uncocking becomes really easy. While cocking you will have clicking sounds that could be annoying in hunting situations but you can lift the cocking lever at the rear of the crossbow to cut the clicking but be careful, by doing so, you are transferring draw weight directly into the cocking handle. So be aware of holding the handle with the appropriate strength if you push the cocking lever. Otherwise, the Versa-draw cocking device features about 10 pounds of cocking force needed.

How to Uncock a Crossbow

All manufacturers offer their technique but how to uncock a crossbow is pretty universal except for few models. The principal way to uncock your crossbow is shooting a bolt into the soil in a safe area.

Another method is using discharge bolts. This bolt is specially made for uncocking the crossbow safely. The technique is the same though, you have to shoot in a safe area (target or soil) and finally, some cranking mechanism offer

Finally, the safest method is to uncock the string by reversing the cranking mechanism of the crank cocking device that allows you to do it. For instance, like seen in the video above, the Versa-draw system from Ravin crossbows allow you to uncock the crossbow without shooting any bolts.

Tip: DO NOT dry-fire to uncock a crossbow, this may result in damaging the crossbow or even worst, your own self.

Conclusion

How to cock a crossbow has no more mystery to you. The different techniques are easy to perform and can easily suit any needs.

Draw weights are not anymore a problem when you are looking to purchase a crossbow. It is more your personal preferences and your physical condition that should determine what kind of cocking device you should choose to go with your crossbow. Once done, it should narrow down few models and facilitate the selection.

Thank you for reading me. Do not hesitate to ask questions or leave any comments below. Have a nice Hunt!

So you have finished reading the how to cock a crossbow topic article, if you find this article useful, please share it. Thank you very much. See more: pulling crossbow back by hand, how to load a crossbow, best crossbow cocking device, barnett crossbow crank, how to draw a crossbow easy, crossbow cocking rope amazon, cocking a crossbow with one hand, crossbow rope cocker

Top 19 How To Cock A Crossbow The 67 Detailed Answer

Can u cock a crossbow by hand?

How much strength does it take to cock a crossbow?

Should the safety be on when cocking a crossbow?

Is a 150 lb crossbow good for hunting?

How powerful is a 175 lb crossbow?

Is 330 fps good for a crossbow?

Can you dry-fire a crossbow?

What is the riser on a crossbow?

What is a latch on a crossbow?

Should you leave a crossbow string?

Do crossbows lose power?

Why do many hunters choose a recurve crossbow instead of a compound crossbow?

Which of the following describes the latch on a crossbow?

Which part of the crossbow is designed to prevent the arrow from releasing accidentally?

What are the two most common types of crossbows?

How To Cock And Load A Crossbow – YouTube

Cocking the Crossbow

Archery Lesson: How to Cock a Crossbow | Hunting-Bow

Cocking the Crossbow

How to Cock Crossbow with Rope Cocking Device

Cocking Your Crossbow by Hand

Cocking a Crossbow, the Right (and Wrong) Way • Advanced Hunter

How to Cock a Crossbow

Leave a Comment Cancel reply