Top 37 How To Cut Down A Steel Basketball Pole 130 Most Correct Answers

You are looking for information, articles, knowledge about the topic nail salons open on sunday near me how to cut down a steel basketball pole on Google, you do not find the information you need! Here are the best content compiled and compiled by the Chewathai27.com team, along with other related topics such as: how to cut down a steel basketball pole how to cut down a basketball pole, how to cut a steel pole, how to cut a metal basketball pole, how to cut down a basketball goal, how to cut a thick metal pole, how to cut hardened steel, how to cut a large metal pole, what to do with old basketball pole

How do you cut a basketball pole?

Can you cut a metal pole with a hacksaw?

Hacksaws work by simply moving the blade through the metal backwards and forwards in a regular ‘sawing’ action. The C shaped handles are relatively cheap to buy and the wide range of blades available enables a wide range of profile thickness and metal grades to be cut easily.

What saw is best for cutting metal?

Can angle grinder cut steel?

You can use angle grinder to cut metal and all types of it, including bolts, angle iron, rebar, and even sheet metal, when it’s equipped with an abrasive metal-cutting disc. However, as you use the discs, they wear down fast, cut slowly, and reduce in diameter.

How do you cut metal without a cutter?

Can a hand saw cut through metal?

There are different reasons for needing a hand saw. With each varying use, one saw may be a better fit compared to another. For example, there are hand saws for cutting wood, metal, drywall and plastic. You can even work with specialty projects like furniture making.

Which hand tool is used solely for cutting metals?

Snips or shears

Snips and shears are used for cutting metal.

How do you break concrete from a basketball pole?

The better long-term option is to dig the pole out from the ground. This is a labor-intensive task that involves digging 2.5 to 3 feet under the surface to pull the pole from the ground without leaving behind anything. Next, they’ll remove the concrete surrounding the pole with either a sledgehammer or jackhammer.

What do you do with old basketball poles?

If you’re unsure about what to do with your old basketball goal, let us take it off your hands. If your unwanted hoop is still in good shape, we will donate it to a local charity. If it’s no longer in good condition, scrap metal recycling is better than dumping it in a landfill.

How do you take sleeves off a basketball pole?

Simply slip the pole into the ground sleeve, and a locking tab will secure it into place. To remove pole, just removed locking tab and slide the pole out. The ground sleeve allows the rigidity of an in-ground pole while being removable for storage.

---

Reciprocating Saw Cutting 2 Inch Pole

Reciprocating Saw Cutting 2 Inch Pole

---

How to Cut a Steel Pole | Hunker

• Article author: www.hunker.com
• Reviews from users: 48342 Ratings
• Top rated: 3.9
• Lowest rated: 1
• Summary of article content: Articles about How to Cut a Steel Pole | Hunker Updating …
• Most searched keywords: Whether you are looking for How to Cut a Steel Pole | Hunker Updating Steel poles are a common sight as flagpoles, railings and fences or supporting scaffolding or basketball nets. To fit and install any of these things, it may be necessary to cut a steel pole down to size.
• Table of Contents:

Cutting a Steel Pole With a Saw

Step 1

Step 2

Step 3

Step 4

Step 5

Cutting a Steel Pole With a Torch

Step 1

Step 2

Step 3

Step 4

Step 5

Step 6

Step 7

Step 8

Step 9

Step 10

Step 11

Step 12

Step 13

Read More

How to Remove a Basketball Pole in 7 Steps (Guide)

• Article author: dunkorthree.com
• Reviews from users: 28978 Ratings
• Top rated: 3.1
• Lowest rated: 1
• Summary of article content: Articles about How to Remove a Basketball Pole in 7 Steps (Guide) Updating …
• Most searched keywords: Whether you are looking for How to Remove a Basketball Pole in 7 Steps (Guide) Updating
• Table of Contents:

My Personal Experience

Resources You’ll Need

How to Remove a Basketball Pole A Step by Step Guide

Additional Resources

Final Words

6 comments

Read More

How To Cut Metal – Ace Hardware – YouTube

• Article author: www.youtube.com
• Reviews from users: 35931 Ratings
• Top rated: 4.4
• Lowest rated: 1
• Summary of article content: Articles about How To Cut Metal – Ace Hardware – YouTube Updating …
• Most searched keywords: Whether you are looking for How To Cut Metal – Ace Hardware – YouTube Updating Whether you’re in need of cutting metal piping or framing, the process is easier then you’d think! Watch as Ace’s Home Expert, Lou Manfredini, shows you an e…Ace, Ace Hardware, lou manfredini, pipe, cutting, cut, how to cut metal, metal, piping, framing, steel, iron, tutorial, how to, beginner, instructions, sawing, saw, rod, tool, sheet, easy, diy, cheap, shear, circular, carving, chisel, file, gouges, reciproacting, cable, scissors, dremel, sparks, plate, pole, manual, grip, dewalt, fabrication, compound
• Table of Contents:

Read More

How To Cut a Ski Poles – YouTube

• Article author: www.youtube.com
• Reviews from users: 21703 Ratings
• Top rated: 4.7
• Lowest rated: 1
• Summary of article content: Articles about How To Cut a Ski Poles – YouTube Updating …
• Most searched keywords: Whether you are looking for How To Cut a Ski Poles – YouTube Updating If you have any questions please leave in the comments section belowPlease subscribe and LIKE our video!Helm-sport.comHelm of Sun Valley333 N Amphlett Blvd.S…Mateo, pole, San, cut, HelmSports, shorten, helm-sport.com, how to, CA, how-to, san mateo, helm of sun valley, ski
• Table of Contents:

Read More

How to Cut Metal Without Traditional Metal Cutting Tools – Kevin Caron – YouTube

• Article author: www.youtube.com
• Reviews from users: 35583 Ratings
• Top rated: 4.2
• Lowest rated: 1
• Summary of article content: Articles about How to Cut Metal Without Traditional Metal Cutting Tools – Kevin Caron – YouTube Updating …
• Most searched keywords: Whether you are looking for How to Cut Metal Without Traditional Metal Cutting Tools – Kevin Caron – YouTube Updating From http://www.kevincaron.com – In response to a viewer from Kuwait, artist Kevin Caron gives several “work arounds” for cutting metal as thick as 1/8″ with…cut metal, cutting wheel, skilsaw, table saw, Sawzall, cut off blades, cut-off blades, cutoff blades, cutting guide, how-to videos, how to videos, artist Kevin Caron, sculptor Kevin Caron, Kevin Carron
• Table of Contents:

Read More

How to cut metal pole – PolyTech Forum

• Article author: www.polytechforum.com
• Reviews from users: 29274 Ratings
• Top rated: 3.3
• Lowest rated: 1
• Summary of article content: Articles about How to cut metal pole – PolyTech Forum I need to cut a steel pole. It is the pole of an inground basketball … Maybe take a chisel and cut down an inch or so under the level of the street. …
• Most searched keywords: Whether you are looking for How to cut metal pole – PolyTech Forum I need to cut a steel pole. It is the pole of an inground basketball … Maybe take a chisel and cut down an inch or so under the level of the street. ^^^^^^^^^^ Oxy-acetylene cutting torch. The cheapest and fastest method for you will probably be to get a 41/2″ grinder ( Dewalt or Makita style ) and along ext…
• Table of Contents:

Read More

How To Cut Down A Steel Basketball Pole? 🏅 14 Responses For (2022), «Sport-Topics FAQ»

• Article author: sport-topics.com
• Reviews from users: 16706 Ratings
• Top rated: 4.9
• Lowest rated: 1
• Summary of article content: Articles about How To Cut Down A Steel Basketball Pole? 🏅 14 Responses For (2022), «Sport-Topics FAQ» How to Install a Basketball Hoop In-Ground · 1) A reciprocating saw. · 2) A torch. · 3) Cut off wheel on a grinder. · 4) A hack saw. · 5) If you have a tractor, … …
• Most searched keywords: Whether you are looking for How To Cut Down A Steel Basketball Pole? 🏅 14 Responses For (2022), «Sport-Topics FAQ» How to Install a Basketball Hoop In-Ground · 1) A reciprocating saw. · 2) A torch. · 3) Cut off wheel on a grinder. · 4) A hack saw. · 5) If you have a tractor, … ТОP answer 🏅 How to Remove a Basketball Pole: A Step by Step Guide Step 1: Check for … … MORE
• Table of Contents:

Read More

How to Remove a Basketball Pole in 7 Steps (Guide)

• Article author: dunkorthree.com
• Reviews from users: 7380 Ratings
• Top rated: 3.4
• Lowest rated: 1
• Summary of article content: Articles about How to Remove a Basketball Pole in 7 Steps (Guide) If you are not going to reuse the pole, another option that can make the job a little easier is to use a reciprocating saw with a metal cutting … …
• Most searched keywords: Whether you are looking for How to Remove a Basketball Pole in 7 Steps (Guide) If you are not going to reuse the pole, another option that can make the job a little easier is to use a reciprocating saw with a metal cutting …
• Table of Contents:

My Personal Experience

Resources You’ll Need

How to Remove a Basketball Pole A Step by Step Guide

Additional Resources

Final Words

6 comments

Read More

Pole in Cement – HomeOwnersHub

• Article author: www.homeownershub.com
• Reviews from users: 4049 Ratings
• Top rated: 3.3
• Lowest rated: 1
• Summary of article content: Articles about Pole in Cement – HomeOwnersHub cutting down a basketball hoop pole. The backboard broke off years ago so I got a nine foot steel pole in three feet of cement. The main problem is the …
• Most searched keywords: Whether you are looking for Pole in Cement – HomeOwnersHub cutting down a basketball hoop pole. The backboard broke off years ago so I got a nine foot steel pole in three feet of cement. The main problem is the Chisel the concrete around where it meets the steel down at a 45 degree angle, but not too deep. The abrasive wheel is quite up to grinding down both steel and …
• Table of Contents:

Read More

How to Remove the Basketball Metal Pole – SportsRec

• Article author: www.sportsrec.com
• Reviews from users: 42840 Ratings
• Top rated: 3.3
• Lowest rated: 1
• Summary of article content: Articles about How to Remove the Basketball Metal Pole – SportsRec Using the power saw, cut the metal pole in half to decrease the weight of the portion stuck in the ground. After this is complete, cut the pole … …
• Most searched keywords: Whether you are looking for How to Remove the Basketball Metal Pole – SportsRec Using the power saw, cut the metal pole in half to decrease the weight of the portion stuck in the ground. After this is complete, cut the pole … When it’s time to say goodbye to the old in-ground basketball hoop, it is important to completely remove it from the ground, so that no injuries occur from leftover pieces. Removing the pole is challenging and takes a lot of effort, possibly from two people, but is doable with the right technique. Be sure to have …
• Table of Contents:

More Articles

Instructions

Read More

Stuck with an unwanted basketball pole

• Article author: misc.consumers.house.narkive.com
• Reviews from users: 20239 Ratings
• Top rated: 4.7
• Lowest rated: 1
• Summary of article content: Articles about Stuck with an unwanted basketball pole During a bad windstorm six months ago, the wind actually snapped off a pole by my driveway, onto which was mounted a basketball hoop and backboard. …
• Most searched keywords: Whether you are looking for Stuck with an unwanted basketball pole During a bad windstorm six months ago, the wind actually snapped off a pole by my driveway, onto which was mounted a basketball hoop and backboard.
• Table of Contents:

Read More

---

See more articles in the same category here: https://chewathai27.com/toplist.

How to Cut a Steel Pole

Step 4

Cut the pole. If using a circular saw, squeeze the trigger hard and push the saw firmly, evenly and slowly into the pole until it has cut all the way through. With a hacksaw, this will take much longer, as you will be relying on the power of your arms and hands. Start the cut with a few tentative strokes to build a groove along your cut line, then pull the saw back and forth hard to cut the pole. If the pole is small enough to fit in a bandsaw, set it across the bandsaw deck, start the saw, then get a good grip on the pole on either side of the blade and push it through firmly and slowly.

How to Remove a Basketball Pole in 7 Steps (Guide)

Do you have an old in-ground basketball pole on your court that needs to be replaced or removed? Maybe its an eye-sore, or it’s in a bad spot. Or do you have a great in-ground basketball hoop and you are moving to a new house and want to take the hoop with you?

Either way, if you have an in-ground (mounted in concrete) basketball pole, it may seem like an almost impossible task to remove it, but don’t worry. It is possible with some simple engineering and a little elbow grease, to remove an inground basketball pole.

Unless you own or rent a backhoe or a bulldozer to knock the poll over, this can be a little labor-intensive so if your not up for the challenge and hard work you may want to hire someone to do this for you, but if you have basic DIY skills and don’t mind a little digging, then you can definitely do this job.

My Personal Experience

When I was a young kid, we had a great basketball hoop on our driveway that we used all the time. My father got a job transfer and we had to move, but we wanted to take the great hoop with us to our new house. I can still remember my father using a method similar to the one I will describe here to remove that basketball post. We took that basketball pole and installed it in our new house and used it for many years after that.

I have also had some experience in removing old fence posts. The method I will describe below is very similar and can really work for any type of post or pole that is cemented into the ground.

Resources You’ll Need

Below is a list of things you may need to remove the basketball pole:

Phone number of the local utility company (if you have inground utilities).

One or more helpers – the more helpers the better. You will be digging and you will also need lots of hands and strength to bring the pole gently to the ground.

A shovel.

Safety goggles.

Sledgehammer – if you are going to relocate the pole, you will need this to break the old concrete off of the pole.

How to Remove a Basketball Pole: A Step by Step Guide

The following are some general steps on how to remove an in-ground basketball pole. Keep in mind that this is a labor-intensive process and that basketball poles can be extremely heavy. Please use caution and make sure that the area surrounding the pole is clear. Use your helpers to try and gently bring the pole down.

While there are many ways to remove a pole set in concrete, the following method, in my opinion, is the one that requires the least amount of tools and resources. While it may take a little longer, you will not need tools like a jackhammer, bulldozer or other heavy equipment.

One last note before we start. If you would like you can remove the backboard and rim before you start. This will lighten the pole and make it easier to lower down once it is loosened and possibly prevent damage to the backboard and rim. Keep in mind that if you do remove the backboard you will need helpers to unfasten it and lower it down to the ground.

Step 1: Check for buried utilities.

If you have any buried utilities in your area such as gas, phone, electric, internet or cable, it is very important to ensure that you do not hit any of them when digging. Most cities provide free service to check for buried utilities before you dig. If you have any doubt call your local utility companies and ask them if they can mark all the buried services near your work area before you start digging.

Step 2: Clear the area.

Ensure that the area around the basketball pole is clear. Make sure people are out of the way and move any vehicles or other things that can be damaged.

Step 3: Begin digging.

Begin digging on each side of the pole next to the playing surface. See the diagram below.

Step 4: Dig to the bottom of the pole.

Continue digging the holes until you reach the bottom of the pole and concrete. It will probably be at least 2 to 2.5 feet below the surface.

Step 5: Rock the pole back and forth.

Once the holes are dug. Get your helpers and begin pushing the pole back and forth in the direction of the holes that you have dug to try to loosen it. Be careful, because once it loosens, it is possible that it will fall to one side or the other.

Step 6: Walk the pole down to the ground.

Once it is loose enough to fall over, you and your helpers can slowly walk the pole down to the ground.

Step 7: (Optional) Remove the concrete.

If you are going to relocate the pole, take your sledgehammer and hammer the concrete on the bottom of the pole to crack and remove it from the pole. Be sure to wear your safety goggles for this part as there will be lots of debris flying around.

Additional Resources

There is a method in which you can use a truck and a tow rope to pull the pole down. This video shows how that can be done. This method may be faster but keep in mind that this method can be dangerous and you could risk damage to your truck if the pole falls on it.

If you are not going to reuse the pole, another option that can make the job a little easier is to use a reciprocating saw with a metal cutting blade and cut the pole off four or five feet from the ground. This requires some intense metal cutting and the use of a power tool, so this method may not be for everyone.

Final Words

If you do choose to cut the pole first, please take all safety precautions. Make sure that you know how to use the tool and that you wear proper safety equipment at all times. Remember when you cut the pole it is going to fall like a tree, so make sure the area is clear and that it won’t hit anyone or anything.

Removing a basketball pole can be difficult, but it is something that can be done with a little hard work and some help from friends and family. Remember to use caution, ensure the space is clear and make sure you use helpers, this is not a one-person job. Once you have that basketball pole removed you can relocate it or put in a brand new top of the line hoop if you want.

Have you ever removed a pole or post set in concrete? Do you have any other tips or advice? We’d love to hear from you, so please leave your comments if you would like.

How to cut metal pole

A Andy Contact options for registered users

posted 19 years ago Wed, Jul 16, 2003 3:27 PM I need to cut a steel pole. It is the pole of an inground basketball

goal. It is currently standing up and anchored with concrete to the

ground. I am totally clueless about metal cutting.

Is it possible to “saw off” the pole near its base ? If yes, what

type of saw or cutting tool do I need to use ? Any advice on how to

go about it ?

For background, this is an old and broken goal installed by the

previous owner of the house. It is just outside our fence, on the

back alley. This morning a city inspector knocked on our door and

asked that it be removed immediately, since some big trucks are having

problems going through the alley.

Another option would be to break the concrete base where it is

anchored. But that seems to me like even a bigger and more complex

job.

Please help.

Thanks,

Andy

Reply to

Andy Notify me about replies to my post Reply

Loading thread data …

L Leo Lichtman Contact options for registered users

posted 19 years ago Wed, Jul 16, 2003 3:52 PM Andy wrote: (clip)Any advice on how to go about it ? ^^^^^^^^^^ Oxy-acetylene cutting torch. Drill a hole just where it comes out of the concrete imbedment, to make it easy to start the cut. Afterwards, grind it off smooth and fill with concrete. The cutting part should take, maybe, two minutes. Maybe someone in your area with a torch will offer to help. Where are you?

Reply to

Leo Lichtman Notify me about replies to my post Reply

W Wayne Harris Contact options for registered users

posted 19 years ago Wed, Jul 16, 2003 4:05 PM

Andy wrote:

Show Quoted Text The cheapest and fastest method for you will probably be to get a 41/2″ grinder ( Dewalt or Makita style ) and along extension cord at Home Depot or other tool store like that and grind through and around the pipe at the ground level about 90 percent of the out side. Then bend the pipe and it will probably break the rest or the way off. You can then grind the pipe flush with the ground. Be sure to wear your safety glasses.Andy wrote: Reply to

Wayne Harris Notify me about replies to my post Reply

D Desert Traveler Contact options for registered users

posted 19 years ago Wed, Jul 16, 2003 4:43 PM Show Quoted Text A few ways:

Ideally, with a cutting torch. Blow a starter hole, and jump back in case it has water in it. Cut as low as you can. Maybe take a chisel and cut down an inch or so under the level of the street. Backfill with concrete.

Hand grinder. Hack saw. Sawzall. Circle saw with metal cutting blade.

Cutting with the means that will leave metal above ground, cut the stump vertically several times so that you can fold pieces inward and downward. Use large hammer to bend them over. Imagine banana peels, but going inward into the hole.

Whatever you do, have one or two people with ropes to pull the thing the way you want it to fall.

Good luck. Not a big project, but an interesting one where you have to be paying attention.

Steve

A few ways:Ideally, with a cutting torch. Blow a starter hole, and jump back in case it has water in it. Cut as low as you can. Maybe take a chisel and cut down an inch or so under the level of the street. Backfill with concrete.Hand grinder. Hack saw. Sawzall. Circle saw with metal cutting blade.Cutting with the means that will leave metal above ground, cut the stump vertically several times so that you can fold pieces inward and downward. Use large hammer to bend them over. Imagine banana peels, but going inward into the hole.Whatever you do, have one or two people with ropes to pull the thing the way you want it to fall.Good luck. Not a big project, but an interesting one where you have to be paying attention.Steve Reply to

Desert Traveler Notify me about replies to my post Reply

V Vaughn Simon Contact options for registered users

posted 19 years ago Wed, Jul 16, 2003 5:09 PM

Vaughn

Show Quoted Text 1) Rent a pipe cutter. Cut as low to the ground as possible. Smash the remaining stub down with a sledge. Or… 2) Get a shovel and dig around and below the concrete, it probably has no more than one bag of concrete. Use the pole as a big lever to drag the thing out of the ground, it won’t be as hard as you think. Call the city to haul the thing away.Vaughn Reply to

Vaughn Simon Notify me about replies to my post Reply

G Gunner Contact options for registered users

posted 19 years ago Wed, Jul 16, 2003 5:34 PM Show Quoted Text My personal preference is 3 wraps of 200gr primacord, but you could use a cutting torch, or at worst, tie a rope to the top of it, after wetting the ground around it for a day or two, then seeing if it will simply pull out of the ground, by pulling it over.

A hacksaw and some GOOD blades might be a good thing, depending on how much concrete flowed up into the pipe w hen it was installed.

Show Quoted Text Another question..is it on or off your property line? If its off your property line, and not yours..seems to be the city’s problem..they can cut if down in very short order. If its inside your property line..why are the trucks driving on your property? Show Quoted Text A shovel and a sledge hammer works fine, but takes a while. If you cannot come up with the tools such as a hacksaw or cutting torch, try as I said, wetting the soil well, with a hose trickling on it for a few days, then pulling it over with a rope tied to the top. Most posts of this nature are not generally in very deep. If the ground is wet, they generally topple over like a wind blown tree, roots and all. Show Quoted Text Gunner

My personal preference is 3 wraps of 200gr primacord, but you could use a cutting torch, or at worst, tie a rope to the top of it, after wetting the ground around it for a day or two, then seeing if it will simply pull out of the ground, by pulling it over.A hacksaw and some GOOD blades might be a good thing, depending on how much concrete flowed up into the pipe w hen it was installed.Another question..is it on or off your property line? If its off your property line, and not yours..seems to be the city’s problem..they can cut if down in very short order. If its inside your property line..why are the trucks driving on your property?A shovel and a sledge hammer works fine, but takes a while. If you cannot come up with the tools such as a hacksaw or cutting torch, try as I said, wetting the soil well, with a hose trickling on it for a few days, then pulling it over with a rope tied to the top. Most posts of this nature are not generally in very deep. If the ground is wet, they generally topple over like a wind blown tree, roots and all.Gunner Reply to

Gunner Notify me about replies to my post Reply

C clare Contact options for registered users

posted 19 years ago Wed, Jul 16, 2003 6:08 PM Show Quoted Text Tell the city it’s on their property, bring in a backhoe or Hiab and yank it out. Tell the city it’s on their property, bring in a backhoe or Hiab and yank it out. Reply to

clare Notify me about replies to my post Reply

I Ian Stirling Contact options for registered users

posted 19 years ago Wed, Jul 16, 2003 6:37 PM Show Quoted Text A pressure washer, or even a hosepipe with a tightly focussed spray nozzle may be of great use in freeing the concrete base from the ground. A pressure washer, or even a hosepipe with a tightly focussed spray nozzle may be of great use in freeing the concrete base from the ground. Reply to

Ian Stirling Notify me about replies to my post Reply

J jim rozen Contact options for registered users

posted 19 years ago Wed, Jul 16, 2003 7:52 PM Show Quoted Text LOL. Good point. Missed that one!

Jim

================================================== please reply to: JRR(zero) at yktvmv (dot) vnet (dot) ibm (dot) com ==================================================

LOL. Good point. Missed that one!Jim================================================== please reply to: JRR(zero) at yktvmv (dot) vnet (dot) ibm (dot) com ================================================== Reply to

jim rozen Notify me about replies to my post Reply

J John T. McCracken Contact options for registered users

posted 19 years ago Wed, Jul 16, 2003 9:29 PM Show Quoted Text Man oh man that’s extreme. I’ve cut hundreds of steel objects off that were imbedded in concrete and lived to cut another day. Mostly anchors, some pipe, wide flanges ect. An inexperienced type could direct enough heat into the concrete to pop a few pieces out, but that is how we learn not to do it!

JTMcC.

Show Quoted Text Man oh man that’s extreme. I’ve cut hundreds of steel objects off that were imbedded in concrete and lived to cut another day. Mostly anchors, some pipe, wide flanges ect. An inexperienced type could direct enough heat into the concrete to pop a few pieces out, but that is how we learn not to do it!JTMcC. Reply to

John T. McCracken Notify me about replies to my post Reply

D Desert Traveler Contact options for registered users

posted 19 years ago Wed, Jul 16, 2003 10:32 PM Show Quoted Text Make sure you have enough beer, too.

Steve 😉

Make sure you have enough beer, too.Steve 😉 Reply to

Desert Traveler Notify me about replies to my post Reply

L Leo Lichtman Contact options for registered users

posted 19 years ago Wed, Jul 16, 2003 11:18 PM clare wrote: Do NOT use a torch!!!!!!!!!!!!!!!!. The concrete will blast away something awfull. ^^^^^^^^^^^ I think NOT!!!!!!!!!!!!! If you turn the torch directly onto the concrete, you will surely get some flaking and popping, but if you direct the flame to the inside of the pole, through a hole, as I suggested, you will not have this problem at all. The trick is to get someone with a torch to come help you. If you have to hire a professional, with a truck full of equipment, then it could be fairly expensive. In that case I would resort to a Sawzall, or just follow the legal counsel of several others in this thread, and let the city take care of it.

If the concrete contains that special expanding re-bar that is evidently used in Texas freeways, this could be a whole nother story. 🙂

Reply to

Leo Lichtman Notify me about replies to my post Reply

V Vince Iorio Contact options for registered users

posted 19 years ago Wed, Jul 16, 2003 11:47 PM

Of course this assumes there are no “laws” that are interfering with common sense.

Vince

P.S. I also agree with the cutting torch.

jim rozen wrote:

Show Quoted Text I agree with Jim, If it is not on your property then, and you did not put it in, then it is not your problem. If it is on your property, then it is still not your problem because it’s on your property.Of course this assumes there are no “laws” that are interfering with common sense.VinceP.S. I also agree with the cutting torch.jim rozen wrote: Reply to

Vince Iorio Notify me about replies to my post Reply

P Paul Hiers Contact options for registered users

posted 19 years ago Thu, Jul 17, 2003 12:23 AM

Show Quoted Text Andy, A cutting torch might work but you might want to check to make sure the pole is not concrete filled. When I installed on of these years ago I filled the pole with concrete, made a real solid instalation but hard to remove. 🙂 Paul Reply to

Paul Hiers Notify me about replies to my post Reply

G Gary Coffman Contact options for registered users

posted 19 years ago Thu, Jul 17, 2003 2:54 AM Show Quoted Text Destructo Saw. Great tool.

Gary

Destructo Saw. Great tool.Gary Reply to

Gary Coffman Notify me about replies to my post Reply

T Thomas Kendrick Contact options for registered users

posted 19 years ago Thu, Jul 17, 2003 3:21 AM

Show Quoted Text I had one of these. The installation instructions called for 9 bags of concrete mix in the hole. Then fill the first section of post with concrete up to the joint. The metal tubing of the pole is fairly thin if it was a purchased unit. If it was made from drill stem, that’s a completely different matter. Several easy and quick cutting methods have been suggested. Leave the concrete base in the ground if possible. Reply to

Thomas Kendrick Notify me about replies to my post Reply

R Ron Thompson Contact options for registered users

posted 19 years ago Thu, Jul 17, 2003 3:47 AM Hell, tell the local scrap guy he can have it if he cuts it down. I’d use a torch. Reply to

Ron Thompson Notify me about replies to my post Reply

M Michael Contact options for registered users

posted 19 years ago Thu, Jul 17, 2003 3:51 AM

Show Quoted Text ahhh, Joel ur absolutely right, i’m slipping. 🙂 Reply to

Michael Notify me about replies to my post Reply

E Eastburn Contact options for registered users

posted 19 years ago Thu, Jul 17, 2003 4:37 AM I like the drilling of holes myself – more people have drills.

Start with a smaller size drill – center of the drill doesn’t drill well. Then work up.

Be at the bottom – or close – and then use a “Cold” chisel and a 2 pound hammer to cut from one hole through the pipe to the other. From inside of the hole to the next inside that is.

The metal chisel is a prime instrument for this – saws are fine if one is handy.

Alternate – call a welding company – explain the task Set the specs!!! – get a bid.

Martin Reply to

Eastburn Notify me about replies to my post Reply

So you have finished reading the how to cut down a steel basketball pole topic article, if you find this article useful, please share it. Thank you very much. See more: how to cut down a basketball pole, how to cut a steel pole, how to cut a metal basketball pole, how to cut down a basketball goal, how to cut a thick metal pole, how to cut hardened steel, how to cut a large metal pole, what to do with old basketball pole