You are looking for information, articles, knowledge about the topic nail salons open on sunday near me how to fix a cd player that won t spin on Google, you do not find the information you need! Here are the best content compiled and compiled by the Chewathai27.com team, along with other related topics such as: how to fix a cd player that won t spin how to fix a dvd player that won’t spin, cd player won t read cd, bose wave cd won t spin, sony cd player won’t spin disc, marantz cd player not spinning, how to fix a portable cd player, cd player spins then stops, denon cd player won t read disc
Contents
How do you fix a DVD player that will not spin?
The DVD spinning motor may lack proper lubrication. You may need to open the case of the DVD player and apply WD-40 or similar lubricant into the motor and drive shaft. Before you do this, make sure it will not void the warranty.
What causes a CD player to stop working?
If a CD player skips, check to be sure the CD itself is not scratched or dirty. If a CD player tray won’t open or close properly, check the belt for dirt or wear and check the tray for misalignment (remove, clean, lubricate, and reinstall). If the sound from a CD player is distorted, check and clean dirty output jacks.
What spins the disc in a CD player?
Inside a CD player
A drive motor spins the disc. This drive motor is precisely controlled to rotate between 200 and 500 rpm depending on which track is being read. A laser and a lens system focus in on and read the bumps.
Can DVD players be repaired?
You can clean the machine, replace cords, and replace faulty motors, belts, and trays. More often, problems with DVD players are caused by faulty DVD discs, either damaged or dirty. A good investment is a CD/DVD repair kit for polishing out surface scratches, available at larger stores where CDs and DVDs are sold.
How long do CD players last?
Hi-fi systems–or at least the speakers, turntable, and amplifier parts of those systems–should last a good deal longer, figure 10 to 20 years. CD players aren’t as long-lived, though they can deliver 5 to 10 years of service.
How do you reset a CD player?
- Unplug the power cord of the CD player from the AC wall outlet.
- Allow the CD player to set without power for 30 seconds.
- Plug the power cord of the CD player back into the AC wall outlet.
Can a broken CD be read?
Broken CDs and DVDs are usually beyond salvage. If you’re desperate enough to try to recover a cracked disc’s data, use an old CD or DVD drive you no longer need. If you’re trying to copy the CD to another disc, set your software to read the cracked CD at the slowest possible speed.
How do you fix a portable DVD player that won’t load?
- Make sure you hear the spindle motor spinning the disk to an even speed. …
- Try with different DVD/ CD to isolate. …
- Look for signs of lubricant/dirt on/under the player tray or on disk. …
- Clean the pick up unit. …
- Re-seat all the connections inside. …
- Swap the drive with a known good one.
How does a DVD lens cleaner work?
Cleaning discs are designed like regular DVDs, but with a tiny brush on one side. As the DVD spins, the brush knocks off dirt and dust particles from the lens. It’s great when it works, but use with caution.
Why is my portable DVD player not reading the disc?
Why Your DVD Player Won’t Read Disc? The most likely and common causes include: The DVD disc isn’t placed properly. The disc is dirty, damaged or burned in player-incompatible format.
How do I fix my RCA portable DVD player?
…
- Make sure the audio jacks are securely connected.
- Make sure the audio connector is not damaged.
- Make sure the volume is turned up.
- Make sure you have set the player’s audio settings correctly.
- Make sure you have entered the correct AV input for your TV.
DVD Player Not Spinning Discs Error Fixed
- Article author: www.winxdvd.com
- Reviews from users: 32139
Ratings - Top rated: 4.0
- Lowest rated: 1
- Summary of article content: Articles about DVD Player Not Spinning Discs Error Fixed Updating …
- Most searched keywords: Whether you are looking for DVD Player Not Spinning Discs Error Fixed Updating Why is DVD player not spinning discs or spinning but won’t play? Hardware issues in most cases. Before you buy a new disc drive, check the tips here.DVD player not spinning, DVD player spins then stops, DVD player spins but won’t play, DVD player won’t spin
- Table of Contents:
Why and How to FIX DVD Player not Spinning Errors
Convert DVD into digital – WinX DVD Ripper Platinum
How to Troubleshoot a CD Player – YouTube
- Article author: www.youtube.com
- Reviews from users: 15404 Ratings
- Top rated: 4.3
- Lowest rated: 1
- Summary of article content: Articles about How to Troubleshoot a CD Player – YouTube Updating …
- Most searched keywords: Whether you are looking for How to Troubleshoot a CD Player – YouTube Updating Full Playlist: https://www.youtube.com/playlist?list=PLLALQuK1NDri8wmmLlkpySSzMjcQmcQnk–Watch more Digital Music & Music Downloads videos: http://www.howcas…technology, cd, player, discman, troubleshoot, fix, problem, solve, disc, music, electronic, stereo
- Table of Contents:
How to fix a CD player that won’t spin properly – Quora
- Article author: www.quora.com
- Reviews from users: 11558 Ratings
- Top rated: 4.4
- Lowest rated: 1
- Summary of article content: Articles about How to fix a CD player that won’t spin properly – Quora The easy answer is to buy an aftermarket stereo with a CD player and replace the current radio. Another option if it has a tape deck is to get an adapter . …
- Most searched keywords: Whether you are looking for How to fix a CD player that won’t spin properly – Quora The easy answer is to buy an aftermarket stereo with a CD player and replace the current radio. Another option if it has a tape deck is to get an adapter . Mostly, you don’t. You can take a look inside for hair or gunk obstructing it, or try one drop of light oil on the spindle bearing (last resort) but if the motor’s going bad it’s time for a tech, or a new player. Some are hard/impossible to get pa…
- Table of Contents:
CD Player Motor Not Spinning
- Article author: www.petervis.com
- Reviews from users: 9169 Ratings
- Top rated: 4.5
- Lowest rated: 1
- Summary of article content: Articles about CD Player Motor Not Spinning If your CD player motor is not spinning, then chances are that it has quit working and your prized high-end CD player has the option of either being … …
- Most searched keywords: Whether you are looking for CD Player Motor Not Spinning If your CD player motor is not spinning, then chances are that it has quit working and your prized high-end CD player has the option of either being …
- Table of Contents:
Nothing is forever
Replacement Motors
The RF-300CA Series
The RF-300FA Series
The Yellow Wire
A look inside a worn out motor
Replacing a worn out motor
How To Fix A Cd Player That Won’t Spin
- Article author: logisticpublic-home-blogs.s3.amazonaws.com
- Reviews from users: 27992 Ratings
- Top rated: 3.4
- Lowest rated: 1
- Summary of article content: Articles about
How To Fix A Cd Player That Won’t Spin
Follow this procedure to troubleshoot if the cd player will not play a disc. Likely the motor does not start spinning until the cd tray is completely closed. To … … - Most searched keywords: Whether you are looking for
How To Fix A Cd Player That Won’t Spin
Follow this procedure to troubleshoot if the cd player will not play a disc. Likely the motor does not start spinning until the cd tray is completely closed. To … - Table of Contents:
CD Drive Won’t Spin Up Disc – How to Repair? \
VOGONS
- Article author: www.vogons.org
- Reviews from users: 20339 Ratings
- Top rated: 3.7
- Lowest rated: 1
- Summary of article content: Articles about CD Drive Won’t Spin Up Disc – How to Repair? \
VOGONS Open the cdrom and Follow SirNickity advice and just attach power. Power it up and open the tray. Check the top CD holder, it has to be very … … - Most searched keywords: Whether you are looking for CD Drive Won’t Spin Up Disc – How to Repair? \
VOGONS Open the cdrom and Follow SirNickity advice and just attach power. Power it up and open the tray. Check the top CD holder, it has to be very … - Table of Contents:
Main menu
Login
Breadcrumbs
Common searches
CD Drive Won’t Spin Up Disc – How to Repair
VOGONS
How to fix a dvd player that won t spin
- Article author: bonusmaximum.mystrikingly.com
- Reviews from users: 15022 Ratings
- Top rated: 3.7
- Lowest rated: 1
- Summary of article content: Articles about How to fix a dvd player that won t spin How to Fix CD or DVD Player No Disc Error – won#x27;t play cd.CD Player Motor Not Spinning – Peter Vis.How To Fix A Portable Dvd Player? …
- Most searched keywords: Whether you are looking for How to fix a dvd player that won t spin How to Fix CD or DVD Player No Disc Error – won#x27;t play cd.CD Player Motor Not Spinning – Peter Vis.How To Fix A Portable Dvd Player? How to Fix CD or DVD Player No Disc Error – won#x27;t play cd.CD Player Motor Not Spinning – Peter Vis.How To Fix A Portable Dvd Player? CountOn Math Games.DVD Drive spins up but
- Table of Contents:
How to Fix CD or DVD Player No Disc Error – won#x27;t play cd
CD Player Motor Not Spinning – Peter Vis
How To Fix A Portable Dvd Player CountOn Math Games
DVD Drive spins up but doesn#x27;t read disc then ejects disc
How to repair dvd player
Disc playback issues on a DVD player Sony USA
CDDVD drives won#39;t spin-up – Dell Community
How to fix a CD player that won#39;t spin properly – Quora
My dvd-rom does not spin – Microsoft Community
How to Troubleshoot CD DVD or Blu-Ray Drive Problems – Dell
How To Fix A Dvd Player That Won T Close – CountOn Math Games
DVD Won#39;t Play Here Are Remedies to Repair Such Issues
DVD Player Not Spinning Discs Error Fixed – WinXDVD
How to Troubleshoot a DVD That Is Not Spinning | Techwalla
- Article author: www.techwalla.com
- Reviews from users: 4780 Ratings
- Top rated: 4.4
- Lowest rated: 1
- Summary of article content: Articles about How to Troubleshoot a DVD That Is Not Spinning | Techwalla Spray three short bursts of WD-40 (or similar lubricant) under the plastic disc that grabs the DVD and pulls it into the motor and drive shaft (it will be a … …
- Most searched keywords: Whether you are looking for How to Troubleshoot a DVD That Is Not Spinning | Techwalla Spray three short bursts of WD-40 (or similar lubricant) under the plastic disc that grabs the DVD and pulls it into the motor and drive shaft (it will be a … All DVD transports, like any moving motor, eventually lock up or seize due to lack of lubrication. With a DVD motor, this is problematic, as the electronics inside the unit expect the disc to ramp up within an allotted amount of time to read the contents. But it is a problem you can solve.
- Table of Contents:
Step 1
Step 2
Step 3
Step 4
Step 5
Step 6
CD not spinning when inserted | AVForums
- Article author: www.avforums.com
- Reviews from users: 44327 Ratings
- Top rated: 3.1
- Lowest rated: 1
- Summary of article content: Articles about CD not spinning when inserted | AVForums Likely the motor does not start spinning until the CD Tray is completely closed. Also likely that there is a micro-switch that signals the … …
- Most searched keywords: Whether you are looking for CD not spinning when inserted | AVForums Likely the motor does not start spinning until the CD Tray is completely closed. Also likely that there is a micro-switch that signals the … but when I give it the slightest of nudges the inserted cd starts to spin when put into my Technics SL-P777 the same when I hit the play button.
I have…
- Table of Contents:
Sections
Advertising
Organisation
Forum Information
Socialising
The HUBS
See more articles in the same category here: https://chewathai27.com/toplist.
DVD Player Not Spinning Discs Error Fixed
If you are searching for an easy solution, click here: The solution most recommended by us [85%]
There are users reporting that the DVD player spins then stops, or DVD player spins but won’t play. For example, “When I put a DVD in, the DVD player is not spinning. The light blinks when it attempts to start the reading but I can’t hear any spinning sound.” This problem is quite a common error with DVD players and is most likely a hardware issue. But before you buy and replace the disc drive, try the solutions below.
Why and How to FIX DVD Player not Spinning Errors?
1. Faulty DVD lens/head. You may need to open the DVD player and inspect the drive unit. Clean any dirt from the DVD drive. Remember don’t insert a disc with a sticker on it, or the sticker may stick on the spinning part and cause the DVD player not spinning disc errors.
2. Check if the disc is placed in the DVD player in the right way (the label is not upside down). There are users who need to manually press the disc down in the DVD player to make the DVD player spin.
3. The DVD spinning motor may lack proper lubrication. You may need to open the case of the DVD player and apply WD-40 or similar lubricant into the motor and drive shaft. Before you do this, make sure it will not void the warranty.
4. If the disc is scratched or damaged in any way, the DVD player spins then stops, or the DVD player spins but won’t play. Also check the DVD player manual to see if it supports the DVD format, like DVD4, HDVD, HDVD-9, etc.
Also see: DVD player not reading discs >>
If Disc is Not Spinning in PS4 or Other PlayStation…
1. As soon as the disc is inserted into the PS4, tap semi-hard on the top the PlayStation around the area where the disc is.
2. There are two door sensors in the PlayStation like PS2 and the disc won’t spin in the drive if the door is open. Make sure the little black nub above the power switch and the white/brown plastic box at the back of the laser assembly are both pushed down.
3. It’s strange that sometimes the DVD player won’t spin discs unless the PlayStation is placed vertically.
CD Player Repair
The compact disc player, or CD player, was the first major entertainment appliance to used digital technology. This Fix-It Guide on CD player repair tells how a CD player works, what often goes wrong, how to identify a CD player problem, and what parts and tools you will need to fix it. It then gives instructions for how to clean a CD, how to clean the CD player lens, how to service the disc tray and belt of a single-play unit, and how to service the CD player tray motor. Some of these repairs also apply to CD burner repair.
How Does a CD Player Work?
A CD player is an electronic device powered by a universal motor that rotates a flat plastic disc that has been stamped with a digital code representing specific sounds. As the player rotates the CD at high speed the sound track–less than the width of a human hair–is read by a laser beam used to produce an electric stereo sound signal. This signal goes to an amplifier and speakers or earphones to reproduce the music represented on the CD.
What Can Go Wrong with a CD Player?
CD players either work or they don’t. The third option is that they work, but the sound skips–which typically is caused by a dirty or damaged disc rather than the player. CD players have few moving parts and are mostly trouble free. In fact, there is little you can do besides clean the CDs, clean the machine, or replace cords. Just about everything else should be turned over to an electronics technician.
Fix-It Tip You can use a CD repair kit, available where CDs are sold, to polish out scratches on the underside of the disc.
How Can I Identify a CD Player Problem?
CD player problems are usually obvious, though the solutions may not be.
If a CD player does not work at all, make sure the power supply is on at the outlet. Check the electrical cord and replace it if necessary; remove the housing and test the fuse; test the on-off switch and replace it if needed.
If a CD player works but produces no sound, check the connections to the stereo system and clean the clear plastic reading lens.
If a CD player skips, check to be sure the CD itself is not scratched or dirty.
If a CD player tray won’t open or close properly, check the belt for dirt or wear and check the tray for misalignment (remove, clean, lubricate, and reinstall).
If the sound from a CD player is distorted, check and clean dirty output jacks.
Fix-It Tip CD players and other electronic devices are dust magnets. Every month, carefully clean the interior of these devices with canned air or a vacuum.
What Do I Need for CD Player Repair?
You can find CD cleaners, canned air, and other tools and parts at electronic stores, or even at larger discount stores. Replacement parts need to come from the manufacturer or aftermarket supplier. Here are some of the tools and materials you may need:
Screwdrivers
Multimeter
Canned air or soft brush
Foam swab or camera-lens tissue
Lens cleaner fluid
Clean, dust-free cloth
White lithium grease
Tweezers
Cotton gloves
CD cleaning fluid or denatured alcohol
What Are the Steps to CD Player Repair?
The four primary fixes you can do to a CD player include cleaning a CD, cleaning the lens, cleaning the tray, and replacing the tray motor. Let’s take a look at each:
Clean a CD:
Hold the disc by its hub and outside edges. (The music data is located on the back or bottom side of the disc.) Blow dust from the bottom surface with a can of compressed air. Clean dirt and fingerprints with a lint-free cloth dampened with CD-cleaning fluid or denatured alcohol, all available at electronic stores. Wipe from the center outward (not a circular motion).
Clean the CD player lens:
To access the lens in a single-play unit, remove the housing and carefully lift up the hold-down clamp to expose the lens. To remove the lens in a carousel player, remove the player housing and unscrew the bracket secured to the top of carousel, then lift off the bracket. Remove dust with canned air or a soft brush. If needed, use a foam swab or camera-lens tissue (not eyeglass tissue) dampened with lens fluid.
Service the disc tray and belt of a single-play CD unit:
Open the housing by removing the screws on the outside of the housing and remove anything blocking the tray. Press the open-close control to extend tray, and unplug the unit. To remove the clip-on tray front, brace the tray and slide the panel to one side. Unplug any cables connecting the front panel to the interior. Remove the screws securing the front panel and gently tilt it off. If the panel won’t move, check beneath it for clips or additional screws. Lift off the hold-down clamp, screw, or spring on top of the disc tray. Gently pull the tray out of the player. Clean the travel rail and guides with a swab dampened with denatured alcohol. Lubricate the tray sparingly with white lithium grease. Remove the belt to inspect for dirt, water, or damage. Avoid touching the belt with your fingers. Use tweezers or wear cotton gloves. Clean the belt with a lint-free cloth moistened with denatured alcohol. Replace the belt if it is damaged.
Service the CD player tray motor:
Unplug the player and test the motor . A dirty motor plug can make the tray work intermittently. To clean the motor plug, unplug it and spray it with electrical contact cleaner. Then repeatedly plug and unplug the unit to verify contact. To remove the motor, depress the end of each clip or bale with a finger and lift it up. To replace the motor, carefully remove the drive belt with tweezers or gloved hand, then lift the motor out of its mount.
CD Player Motor Not Spinning
CD Player Motor Not Spinning
If your CD player motor is not spinning, then chances are that it has quit working and your prized high-end CD player has the option of either being repaired at a service centre or ending up in landfill. However, the cost of repairs is often the same as the cost of a new blu-ray player, and since everyone likes the latest gadgets, it will very likely end up in landfill.
The motor is an electromechanical component, which tends to wear out first because it is in constant use, and it is the one part, which reaches old age before any other. Interestingly, the laser diode tends to be the second, component to fail after the motor.
Nothing is forever…
Back when I was a whippersnapper, I bought my first CD player, foolishly thinking it was for all time, and I polished all the chrome and displayed it majestically on my hi-fi stack. After a year, it started to skip tracks; however, I ignored it thinking that it might be just a defective CD. Eventually it started skipping tracks on all the CDs that I inserted, and would not play any CD.
As I was “training” 🙂 to be an engineer and was very poor, I decided to open the unit to see if there was anything, I could do. I found that the motor would not spin at all. Pressing the play button resulted in a slight movement of the CD, but there was no rotation. Of course, just like a chimp I scratched my head, and used my gorilla thumb to push the CD to help it along the way, and to my surprise it began spinning!
Replacement Motors
One of the most commonly used motors is the DVD MOTOR D/V 5.9 V RF-300C-11440. Kenwood, JVC, Marantz, Onkyo, and many more, use this motor in their consumer electronics products, because Mabuchi manufacture some of the best ones for such CD players and portable devices. This motor has a very small size, and its body diameter is 24.4 mm, height 12.3 mm, spindle height 6.05 mm, and they are often the most common replacement motors in use today.
The RF-300CA Series
The 300CA-11440 has an operating voltage range of 0.4 V to 5 V. Its maximum speed without load is 2200-rpm drawing a current of 0.018 A. Its output is 0.049 W and its stalling torque is 12 g•cm.
The 300CA-11400 is another very similar model, which has an operating voltage range of 1.2 V to 6 V. Its maximum speed without load is 3700-rpm drawing a current of 0.018 A. However, its stalling torque is 20 g•cm.
The 11400 version is utilised in DVD players, because DVDs require a greater rpm, and torque, whilst the 11440 version is utilised in CD players.
The RF-300FA Series
Mabuchi also make the RF-300FA, which is for DVD players. These are the torque-up types. The RF-300FA-11420 has an operating voltage range of 1.7 V to 6 V. Its maximum speed without load is 2900-rpm drawing a current of 0.068 A. Its maximum torque is 22 g•cm.
The RF-300FA-12350 has an operating voltage range of 1.5 V to 6.0 V. Its maximum speed without load is 3500-rpm drawing a current of 0.093 A. Its maximum torque is 26 g•cm.
Whenever possible, and if the circuit allows it, I always upgrade to the faster higher torque motors. All of these motors are available on eBay, however I have noticed that some seller from abroad may remove the labels, and since the motors are identical in shape and size, it is difficult to determine exactly what they have sent you. Therefore, this is something to look out.
The Yellow Wire
If your motor has an additional yellow wire, then chances are that it has a hall-sensor type mechanism to provide rpm information. Generally, very few motors like this are in CD transport mechanisms today.
One place to find replacement motors is eBay. There are many sellers, and the price can vary from as little as 2.00 to around the 4.00 mark. Generally, I have not had any problems from sellers. Occasionally, you get a seller sending you a motor without a label.
A look inside a worn out motor
Here is a typical motor found in a DVD player. The same manufacturer in the Far East will likely have made it whether it came from a cheap supermarket brand or a high-end machine.
Majority of the transport mechanisms found today are the same clones of the original Sony / Philips design, mass-produced, and made of plastic. They will have the same type of spindle motor for spinning the CD, and their brushes generally wear out at around the same time.
These motors are getting increasingly smaller and found everywhere. They are in cars, hi-fi, computers, laptops, and they can be a real pain when their brushes wear out.
I took one of my old CD motors apart to see how it was constructed, and to check whether it was really worn out.
As you can see, the carbon contacts have all but worn out and it is now down to the copper terminals. I can still get a few more hours from this motor though. Just clean it with some robot aftershave (WD40), and cross your fingers.
On a conventional motor, it is the coil windings wound on a rotor shaft that spins — If I remember that Science Museum model I saw back when I was 12. Since the coil windings need to be in constant connection with a circuit, brushes are used.
The formers are made of iron, and therefore the slightest amount of moisture can get them to rust. I have seen motors taken out of car CD players full of rust. Had this motor been in storage and not used, it still would have failed, because of the build-up of rust. The distance between the formers and the cylindrical magnet, which surrounds it is very small and flaking rust would prevent the motor from turning freely.
When a tape recorder has been stored for a long time, one sometimes finds a jammed motor. This type of problem occurs more in car CD players though. I can see why cleaning this with some robot aftershave can prevent rust and help to lubricate.
Replacing a worn out motor
This one is a very simple mechanism to repair, as the spindle motor is easily accessible from the top; one simply has to slide the tray back to gain access. Spindle motors tend to drive the CD directly and there are no other mechanisms such as gears required; hence, they are one of the easiest components to replace.
Here is a view showing the spindle motor. The height of the motor, and the height of the shaft, are very critical for proper laser focusing and alignment.
As you can see, the motor secures to a base plate, and that is fixed to the platform by three screws. Undoing these screws will detach the motor from the platform.
These are tiny screws; hence, a nice sharp screwdriver bit is necessary.
The motor I bought came with a base plate; however, that plate did not have the holes in the correct places. Thankfully, the base plate fixes to the motor with two tiny screws, and I was able to remove it and fit the original one instead.
Once the replacement motor is in place, one simply has to solder the wires and tape them. I hope the motor spins, and there will be one more CD player saved from landfill.
So you have finished reading the how to fix a cd player that won t spin topic article, if you find this article useful, please share it. Thank you very much. See more: how to fix a dvd player that won’t spin, cd player won t read cd, bose wave cd won t spin, sony cd player won’t spin disc, marantz cd player not spinning, how to fix a portable cd player, cd player spins then stops, denon cd player won t read disc
