Top 11 How To Get Your Downstem Out 16213 People Liked This Answer

You are looking for information, articles, knowledge about the topic nail salons open on sunday near me how to get your downstem out on Google, you do not find the information you need! Here are the best content compiled and compiled by the Chewathai27.com team, along with other related topics such as: how to get your downstem out how to get a water locked downstem out, how to remove grommet from bong, how to prevent downstem from getting stuck, how to remove stuck downstem reddit, broken downstem replacement, downstem suctioned in bong, bottom of downstem broke, how to clean a bong

Pour rubbing alcohol where the downstem’s stuck. Then, use a toothpick to slowly loosen the space between the downstem and the glass. Some people even try using WD-40 instead of alcohol. But you’ll need thorough and proper cleaning after freeing the downstem to remove any remaining chemicals and residue.If your hand can stand the temperature of the water momentarily, reach in and firmly (but cautiously) pinch the sides of the exposed portion of the downstem and gently try to twist and pull. With any luck, that combination of heat and water lubrication will do the trick.Most bongs usually have a fixed or removable downstem. But removable downstems are a much better choice because they can be completely disconnected from the bong to be repaired or removed. It also makes it easier to clean them. One of the most important elements you need to keep in mind with downstems is their length.

Contents

How do you get your Downstem out when its stuck?

If your hand can stand the temperature of the water momentarily, reach in and firmly (but cautiously) pinch the sides of the exposed portion of the downstem and gently try to twist and pull. With any luck, that combination of heat and water lubrication will do the trick.

Do all bongs have a removable Downstem?

Most bongs usually have a fixed or removable downstem. But removable downstems are a much better choice because they can be completely disconnected from the bong to be repaired or removed. It also makes it easier to clean them. One of the most important elements you need to keep in mind with downstems is their length.

How do you clean a Downstem without alcohol?

Add gel to your dirty water pipe.

Let the gel sit in the water pipe for about 20-30 seconds while you shake and swirl. Make sure the gel hits every part inside your dirty piece. Place the downstem and bowl piece into the pouch directly and let sit for 30 seconds as well. You can swirl the pouch but not much is needed.

Are stemless bongs better?

In fact, many stemless pieces have two percolators in the base itself, let alone anything that uses a middle perc which sits on top of the base and can add even more. Stemless bongs have better air flow than stemmed versions and overall are easier to clean.

Are bongs with Downstems better?

Your downstem is essential for transferring smoke from your bowl into your bong. Without a downstem, your bong will be effectively useless! Because your bowl and downstem need to connect with an air-tight seal, it’s important to get a downstem which is compatible with your bong and bowl piece.

What is a stemless bong?

A stemless bong has a fixed downstem. The stem can be very long, some reaching ⅓ of the way up the bong. You can find stems of varying lengths at our Northglenn smoke shop. Most stemless bongs have a perc right at the end to help you get a smoother hit.

What happens if your bong doesn’t have a Downstem?

A downstem is what makes a bong a bong. Without it, a bong is a big fancy dry herb pipe with disconnected water at the bottom. The downstem does the work of pulling the smoke through the water.

What is a fixed Downstem?

A downstem is the piece of a water pipe that connects the bowl to the main chamber, and in this case it is fixed to the pipe, but others can be removable. The downstem helps provide suction, pulling smoke or vapor into the water before getting inhaled.

What is a diffused Downstem?

A diffused downstem is a simple glass tube that pushes the smoke down through the water. Smoke diffuses into the water through the downstems holes or slits, spreading it throughout the liquid and cooling it down. No more harsh inhales with a diffused downstem on your favorite bong or water pipe!

How To Unstick Your Downstem

Is Your Bong’s Downstem Stuck? Here’s 3 Ways to Fix It — Toker Supply

Article author: www.tokersupply.com
Reviews from users: 27032 Ratings
Top rated: 4.3
Lowest rated: 1
Summary of article content: Articles about Is Your Bong’s Downstem Stuck? Here’s 3 Ways to Fix It — Toker Supply Updating …
Most searched keywords: Whether you are looking for Is Your Bong’s Downstem Stuck? Here’s 3 Ways to Fix It — Toker Supply Updating The urgency of fixing the issue and starting your next smoke session can make it seem even more imperative. If rushed, forcibly removing the downstem could lead to a disaster, like a broken downstem. You can prevent this by removing and cleaning the downstem, even when it’s in perfect condition.
Table of Contents:

1 Removing Your Stuck Downstem The Proper Way

2 Using Only Household Items

3 The Hot Water Method

4 Using Glue to Remove the Downstem

Customer Service

Shopping With Us

Company

Get Special Deals & Offers!

Added to your cart

Is Your Bong's Downstem Stuck? Here's 3 Ways to Fix It — Toker Supply — Is Your Bong’s Downstem Stuck? Here’s 3 Ways to Fix It — Toker Supply

Article author: www.thedablab.com
Reviews from users: 25646 Ratings
Top rated: 4.7
Lowest rated: 1
Summary of article content: Articles about How to get a Stuck Downstem out of a Glass Bong – The Dab Lab Start by trying to run the hottest tap water from your sink directly over the area where the downstem enters the bong or bubbler. If your hand … …
Most searched keywords: Whether you are looking for How to get a Stuck Downstem out of a Glass Bong – The Dab Lab Start by trying to run the hottest tap water from your sink directly over the area where the downstem enters the bong or bubbler. If your hand … Check out our latest guide on what causes a downstem to get stuck, how to get that stuck downstem unstuck, and how to prevent it from ever getting stuck again. Not every situation has a solution, so when it’s time to shop for a new glass bong, bubbler, dab rig, or downstem your buds at The Dab lab have got you covered.
Table of Contents:

How to get a Stuck Downstem out of a Glass Bong - The Dab Lab — How to get a Stuck Downstem out of a Glass Bong – The Dab Lab

Article author: www.thedablab.com
Reviews from users: 2158 Ratings
Top rated: 3.6
Lowest rated: 1
Summary of article content: Articles about How to get a Stuck Downstem out of a Glass Bong – The Dab Lab Updating …
Most searched keywords: Whether you are looking for How to get a Stuck Downstem out of a Glass Bong – The Dab Lab Updating Check out our latest guide on what causes a downstem to get stuck, how to get that stuck downstem unstuck, and how to prevent it from ever getting stuck again. Not every situation has a solution, so when it’s time to shop for a new glass bong, bubbler, dab rig, or downstem your buds at The Dab lab have got you covered.
Table of Contents:

Article author: ace-labz.com
Reviews from users: 33025 Ratings
Top rated: 3.8
Lowest rated: 1
Summary of article content: Articles about Thinking About Buying a Downstem? Read This First! – Ace-Labz Updating …
Most searched keywords: Whether you are looking for Thinking About Buying a Downstem? Read This First! – Ace-Labz Updating downstem, bong, smoking rig, water pipe, wax glass, cannabis,bowl, rolling paper, titan-stem, ace-labz, , adjustable downstream, water pipe, dabbers, dab, smoking accessories, glass diffuser, wax dabs, replacement down stems, down stems for bongs, roor, glass downstem, roor glass
Smoking from a bong or sometimes even from a dab rig is impossible without a downstem. A downstem is an essential and basic necessity, without which a bong is pretty useless. It is a long tube made of glass that acts as the connection between your bowl and the water chamber. It works to direct and carry the flow of smoke from the bowl through the water chamber and neck. Some downstems have a little perforation at the end, which provides extra diffusion and cools down the smoke before it reaches your lips. They come in a range of patterns or ‘perc’ styles. At Ace-Labz, we carry a variety of perc and diffused designs, with each providing a unique blend of a cool hit and smooth diffusion.

Most bongs usually have a fixed or removable downstem. But removable downstems are a much better choice because they can be completely disconnected from the bong to be repaired or removed. It also makes it easier to clean them.

Finding The Right Downstem Length

One of the most important elements you need to keep in mind with downstems is their length. You need to determine the required length by measuring from the top of the grounded joint of the downstem to its end. If you do not have downstem for measurement, you can always find out the right length by placing your measuring tape down through the downstem joint till the bottom of the bong. Downstems are usually available in 14mm and 18mm, but you can also find pieces that come in a combination size of 14mm and 18mm, allowing you to place the stem in a joint fitting that measures 18 mm while you enjoy your smoke through a Titan-bowl piece that is 14mm.

Materials used for downstems
While the most common material used for making downstems is glass, today there is a wide variety available in the market. We offer downstems in metal as well, such as the Titan-Stem adjustable and interchangeable downstems.

Shop online at Ace-Labz to buy glass or metal downstems and other accessories such as American made water pipes from a selection of the top brands!
Table of Contents:

Thinking About Buying a Downstem? Read This First! – Ace-Labz

Article author: thebongcleaners.ca
Reviews from users: 10047 Ratings
Top rated: 4.4
Lowest rated: 1
Summary of article content: Articles about
6 Ways to Get A Stuck Downstem Out of a Bong – The Bong Cleaners
The plan is to destroy all the caked-up gunk to make an easy way out for your stem. Pour a reasonable amount of alcohol directly where the … …
Most searched keywords: Whether you are looking for
6 Ways to Get A Stuck Downstem Out of a Bong – The Bong Cleaners
The plan is to destroy all the caked-up gunk to make an easy way out for your stem. Pour a reasonable amount of alcohol directly where the … If you own a bong, you probably guard it with your life. You also know that one rule of thumb to enjoying high-quality hits is to clean each piece regularly. Of course, you were going to clean your bong. But somehow, you got high and ended up couch-locked. Not once, not twice, so many times you missed to clean your bon
Table of Contents:

comment
2 comments

Is Your Bong’s Downstem Stuck? Here’s How to Fix It

Removing a stuck downstem should be in a manual that comes with every bong. Unfortunately, there’s usually no manual and people are find themselves struggling to fix their downstem.

The urgency of fixing the issue and starting your next smoke session can make it seem even more imperative. If rushed, forcibly removing the downstem could lead to a disaster, like a broken downstem. You can prevent this by removing and cleaning the downstem, even when it’s in perfect condition. The downstem is the tube that connects the bowl to the inside of the glass bong.

A long cylindrical tube effectively seals the bong, allowing the smoke to flow into the chamber without dispersing. Resin build-up or incomplete drying (after cleaning) can result in a stuck downstem. In this post, we’ll explore how to properly remove your stuck downstem.

1. Removing Your Stuck Downstem The “Proper” Way

The most effective way to prevent your downstem from getting stuck and keep your bong safe would probably be cleaning your bong every single day. If you have the time to wait for two days, and aren’t in dire need of a good rip, then a glass cleaning item for bongs may be the right thing for you. These methods involve applying the cleaner to the downstem and joint. Then, simply wait for everything to absorb into the build-up on the glass pieces long enough to be easily removed.

If you have a graphite stick for bongs and bowls, you can easily push this into the downstem opening. From here, add a little twist of the wrist and gently wriggle. Then, you’ll be able to pull your downstem out safely.

2. Using Only Household Items

You can use simple household items, such as things that vibrate like an electric toothbrush or razor. For safety, wrap the item in a cloth or napkin and gently press it along the joint. You may be tipping the bong at an angle downward to help remove it. Therefore, it’s a good idea to have someone ready to catch the glass stem as it loosens.

Another option is trying rubbing alcohol which is cheap and widely available. Pour rubbing alcohol where the downstem’s stuck. Then, use a toothpick to slowly loosen the space between the downstem and the glass. Some people even try using WD-40 instead of alcohol. But you’ll need thorough and proper cleaning after freeing the downstem to remove any remaining chemicals and residue.

You can turn the pliers around and use the handle by squeezing it tightly around the top of the downstem and turning in a clockwise or counterclockwise motion. Also, by using a pair of pliers right at the top of the downstem where it slides into the opening and lever it with pressure to release it. However, this method can be dangerous due to having the metal on glass potentially causing a break. A more dangerous method can also include using a larger-sized screwdriver. Forcefully pushing the screwdriver in and using wiggling rotations allows the downstem to become dislodged.

3. The Hot Water Method

Another method or two that you could try is hot water and boiling water. Running hot tap water or pouring boiling water into the stem and bong may help loosen the thick built-up resin allowing you to pull or twist the downstem out safely. However, being safe and not burning yourself is of utmost importance, so you need to use safety gloves or oven mitts when handling hot glass or boiling water.

If that does not work, you can even try the reverse and use the cold water approach! Running the bong and downstem under cold water and using your fingers to relieve the stuck piece from its trap slowly is said to work quickly and efficiently.

Honorable mentions for removing a stuck or broken downstem with convenient household items include; using a wire metal coat hanger by reshaping and hooking the end so that it fits down into the hole at the bottom and can be hooked on the end and pulled out. Placing the whole bong by itself in the dishwasher and giving it a complete wash and taking it out while it is still warm at the end, and removing the downstem that way. A final mention by putting a small ice cube into the opening of the downstem and tapping all around the joint with a wooden spoon or kitchen utensil while lightly pulling is said to release the hold.

4. Using Glue to Remove the Downstem

An easy way to get out a broken downstem would involve using a powerful glue like welders glue and a wooden dowel or wooden spoon. Once you coat the glue on the dowel, you place it into the broken downstem and wiggle it lightly with some twisting. Once the glue has taken hold, it should be easy for you to lightly twist and remove the broken downstem out of the bong.

You Should NEVER Try And Remove Your Downstem Using These 2 Methods:

Tapping with items! No tapping, ever. This method can easily mess with the integrity of the glass and cause it to break. This includes banging on or hitting the bong with your hands, onto a surface, or with objects to get the stem out, as it will destroy the make-up of the glass, making a future break even more probable.

Heating with a flame or hot stove element is another way you should not try. It can happen quickly, and your glass gets too hot. Too high temperatures can cause it to shatter and lead to potentially hurting yourself or others. This method is one way that may seem easy but the risk is too high for the reward! Using a lighter or torch to heat the glass is usually only successful if the culprit is built-up resin.

Conclusion

At Toker Supply, we’re a community of smoking and bong enthusiasts. Therefore, we love helping our clients with any and all of their smoking needs. Whether you’re in need of a bong or a little advice with CBD or dab rigs, we’re always ready to help out and assist you.

How to get a Stuck Downstem out of a Glass Bong

CAUSES & SOLUTIONS FOR A STUCK DOWNSTEM IN A BONG OR BUBBLER

Ok, let’s be honest. How many of you really clean your bong after each and every sesh?

Ok, now how many of you remove the downstem completely each time you clean your tube or beaker bong?

If you’ve still got your hand raised, that’s great! But sadly, you are probably one of the few. Most bongs, bubblers, pipes, and heady dab rigs might get thoroughly cleaned once every five, or ten, or fifty seshes.

Even when downstems are removable, they are often ignored as long as they work. But long before the buildup of resin causes a problem with percolation, it may have already created an issue further up the stem.

MY DOWNSTEM IS STUCK – HOW DID THAT HAPPEN

It doesn’t take much sticky residue buildup between the joint on your glass bong and the glass downstem seated inside of it to cause the downstem to become stuck.

During regular use of your bong or bubbler there is a certain degree of heat transfer between your glass bowl or slide and the glass joint and the glass downstem. That heat can activate and re-activate resin buildup in the area creating a dangerously tight seal that can prevent you from being able to remove the downstem without fear of breaking any of the glass parts.

Another common cause for a stuck or jammed glass downstem, ironically, often occurs just after doing the right thing by cleaning your glass bong or bubbler often and removing the downstem to clean it separately.

What can cause a problem is if the glass joint on the bong or bubbler and the outside surface of the glass downstem are not thoroughly dried before reinsertion. Even if they are both perfectly clean, the residual moisture can form a difficult seal making removal a nerve-wracking event.

The third most common cause for a stuck downstem is when it becomes jammed downward by some incidental contact with a table, or elbow, lighter, or anything you can think of really.

DOWNSTEM IS STILL STUCK – NOW WHAT

We asked around on Facebook, Instagram, Reddit, and more on what to do and here are a handful of methods that we came up with for freeing up a stuck downstem on your favorite glass bong or bubbler.

METHOD 1: PIPING HOT WATER

Start by trying to run the hottest tap water from your sink directly over the area where the downstem enters the bong or bubbler. If your hand can stand the temperature of the water momentarily, reach in and firmly (but cautiously) pinch the sides of the exposed portion of the downstem and gently try to twist and pull. With any luck, that combination of heat and water lubrication will do the trick.

METHOD 2: KILL IT WITH FIRE

If that downstem is still stuck due to resin, you can try your dab torch or a triple flame torch. Just quickly apply moving heat to the affected area with the very tip of the flame of your torch. You do not want to hold the flame to the glass for long as you could damage the glass. If there is visible resin or reclaim buildup, you will see it begin to activate from the heat.

Knowing that the glass downstem will be hot from the torch, use a pot holder or heat resistant gloves to try the same technique as above, gently trying to twist and pull the downstem up and out of the bong while the buildup is still boiling a bit.

METHOD 3: SCIENCE!

If the gunk has caked up so bad that those two methods didn’t even make a dent, don’t give up yet! There are some great glass cleaners on the market these days, like Dark Crystal, Grunge Off, or Formula 420. Just fill the water chamber of your bong enough that the downstem and joint are in contact with the cleaning solution and let everything soak.

With any luck the muck will break down and within 24-48 hours you should be able to gently twist and pull your downstem to freedom.

METHOD 4: TAP, TAP, TAP

When your stem is stuck from moisture being trapped between two glass pieces, the ideas above (hot water, tip of the torch) may come in handy. But another option gets brought up often enough by those who know such things that we think you ought to know too.

It sounds a bit strange at first but bear with us. You’ll want a large spoon, preferably wooden. Some folks wrap the spoon in a towel, some use it bare, but the idea is to gently tap-tap-tap the head of the spoon all around the joint where the downstem is stuck.

Surprisingly enough, the subtle vibration from the spoon’s impact can be just enough to shake loose a seemingly stuck stem and this simple yet effective technique has saved many heady bongs and daily driver bubblers from being scrapped.

METHOD 5: LAST RESORT

One final trick that cames in particularly handy when a downstem is just jammed a bit is to find a pair of pliers with the rubber coated handles. You do not want to apply metal to glass with any amount of force, but using the soft grip rubber handles you may be able to grip the neck of the downstem just where it meets the glass joint of the bong or bubbler. If so, slowly and carefully tilt the head of the pliers downward creating a lever action to (hopefully) raise the downstem up/outward.

Of course, all of these methods require extreme caution so you do not damage your glass or yourself.

Not every situation has an easy solution, but based on the causes that we discussed above these tips and tricks might just get that downstem unstuck.

If you managed to loosen things up enough to get your downstem out, congratulations, not everyone is so fortunate. If not, hopefully it will continue to function until, well, it doesn’t. Just clean it up the best you can with the stem in and keep on rippin!

Thoroughly cleaning and drying your downstem and your bong, bubbler, or dab rig often can go a long way towards prevention.

At The Dab Lab we carry a great variety of scientific glass bongs and bubblers as well as some really heady and affordable glass pieces as well, many of which have the useful option of the removable downstem.

If you recently had to retire a piece due to a jammed up joint we’re sure you can find a new favorite at TheDabLab.com – your one stop shop for all smoking and toking needs.

How to get a Stuck Downstem out of a Glass Bong

CAUSES & SOLUTIONS FOR A STUCK DOWNSTEM IN A BONG OR BUBBLER

Ok, let’s be honest. How many of you really clean your bong after each and every sesh?

Ok, now how many of you remove the downstem completely each time you clean your tube or beaker bong?

If you’ve still got your hand raised, that’s great! But sadly, you are probably one of the few. Most bongs, bubblers, pipes, and heady dab rigs might get thoroughly cleaned once every five, or ten, or fifty seshes.

Even when downstems are removable, they are often ignored as long as they work. But long before the buildup of resin causes a problem with percolation, it may have already created an issue further up the stem.

MY DOWNSTEM IS STUCK – HOW DID THAT HAPPEN

It doesn’t take much sticky residue buildup between the joint on your glass bong and the glass downstem seated inside of it to cause the downstem to become stuck.

During regular use of your bong or bubbler there is a certain degree of heat transfer between your glass bowl or slide and the glass joint and the glass downstem. That heat can activate and re-activate resin buildup in the area creating a dangerously tight seal that can prevent you from being able to remove the downstem without fear of breaking any of the glass parts.

Another common cause for a stuck or jammed glass downstem, ironically, often occurs just after doing the right thing by cleaning your glass bong or bubbler often and removing the downstem to clean it separately.

What can cause a problem is if the glass joint on the bong or bubbler and the outside surface of the glass downstem are not thoroughly dried before reinsertion. Even if they are both perfectly clean, the residual moisture can form a difficult seal making removal a nerve-wracking event.

The third most common cause for a stuck downstem is when it becomes jammed downward by some incidental contact with a table, or elbow, lighter, or anything you can think of really.

DOWNSTEM IS STILL STUCK – NOW WHAT

We asked around on Facebook, Instagram, Reddit, and more on what to do and here are a handful of methods that we came up with for freeing up a stuck downstem on your favorite glass bong or bubbler.

METHOD 1: PIPING HOT WATER

Start by trying to run the hottest tap water from your sink directly over the area where the downstem enters the bong or bubbler. If your hand can stand the temperature of the water momentarily, reach in and firmly (but cautiously) pinch the sides of the exposed portion of the downstem and gently try to twist and pull. With any luck, that combination of heat and water lubrication will do the trick.

METHOD 2: KILL IT WITH FIRE

If that downstem is still stuck due to resin, you can try your dab torch or a triple flame torch. Just quickly apply moving heat to the affected area with the very tip of the flame of your torch. You do not want to hold the flame to the glass for long as you could damage the glass. If there is visible resin or reclaim buildup, you will see it begin to activate from the heat.

Knowing that the glass downstem will be hot from the torch, use a pot holder or heat resistant gloves to try the same technique as above, gently trying to twist and pull the downstem up and out of the bong while the buildup is still boiling a bit.

METHOD 3: SCIENCE!

If the gunk has caked up so bad that those two methods didn’t even make a dent, don’t give up yet! There are some great glass cleaners on the market these days, like Dark Crystal, Grunge Off, or Formula 420. Just fill the water chamber of your bong enough that the downstem and joint are in contact with the cleaning solution and let everything soak.

With any luck the muck will break down and within 24-48 hours you should be able to gently twist and pull your downstem to freedom.

METHOD 4: TAP, TAP, TAP

When your stem is stuck from moisture being trapped between two glass pieces, the ideas above (hot water, tip of the torch) may come in handy. But another option gets brought up often enough by those who know such things that we think you ought to know too.

It sounds a bit strange at first but bear with us. You’ll want a large spoon, preferably wooden. Some folks wrap the spoon in a towel, some use it bare, but the idea is to gently tap-tap-tap the head of the spoon all around the joint where the downstem is stuck.

Surprisingly enough, the subtle vibration from the spoon’s impact can be just enough to shake loose a seemingly stuck stem and this simple yet effective technique has saved many heady bongs and daily driver bubblers from being scrapped.

METHOD 5: LAST RESORT

One final trick that cames in particularly handy when a downstem is just jammed a bit is to find a pair of pliers with the rubber coated handles. You do not want to apply metal to glass with any amount of force, but using the soft grip rubber handles you may be able to grip the neck of the downstem just where it meets the glass joint of the bong or bubbler. If so, slowly and carefully tilt the head of the pliers downward creating a lever action to (hopefully) raise the downstem up/outward.

Of course, all of these methods require extreme caution so you do not damage your glass or yourself.

Not every situation has an easy solution, but based on the causes that we discussed above these tips and tricks might just get that downstem unstuck.

If you managed to loosen things up enough to get your downstem out, congratulations, not everyone is so fortunate. If not, hopefully it will continue to function until, well, it doesn’t. Just clean it up the best you can with the stem in and keep on rippin!

Thoroughly cleaning and drying your downstem and your bong, bubbler, or dab rig often can go a long way towards prevention.

At The Dab Lab we carry a great variety of scientific glass bongs and bubblers as well as some really heady and affordable glass pieces as well, many of which have the useful option of the removable downstem.

If you recently had to retire a piece due to a jammed up joint we’re sure you can find a new favorite at TheDabLab.com – your one stop shop for all smoking and toking needs.

So you have finished reading the how to get your downstem out topic article, if you find this article useful, please share it. Thank you very much. See more: how to get a water locked downstem out, how to remove grommet from bong, how to prevent downstem from getting stuck, how to remove stuck downstem reddit, broken downstem replacement, downstem suctioned in bong, bottom of downstem broke, how to clean a bong

Top 11 How To Get Your Downstem Out 16213 People Liked This Answer

How do you get your Downstem out when its stuck?

Do all bongs have a removable Downstem?

How do you clean a Downstem without alcohol?

Are stemless bongs better?

Are bongs with Downstems better?

What is a stemless bong?

What happens if your bong doesn’t have a Downstem?

What is a fixed Downstem?

What is a diffused Downstem?

Is Your Bong’s Downstem Stuck? Here’s 3 Ways to Fix It — Toker Supply

How to get a Stuck Downstem out of a Glass Bong – The Dab Lab

How to get a Stuck Downstem out of a Glass Bong – The Dab Lab

Thinking About Buying a Downstem? Read This First! – Ace-Labz

6 Ways to Get A Stuck Downstem Out of a Bong – The Bong Cleaners

Ways To Get A Stuck Downstem Out Of A Bong – Ace-Labz

HOW TO GET YOUR DOWNSTEM OR BOWL UNSTUCK – Prism

How to get a Stuck Downstem out of a Glass Bong | VITAE Glass

How to get a Stuck Downstem out of a Glass Bong | Fat Buddha Glass

Our Guide to Getting a Stuck Downstem Out of a Glass Bong – MM-TECH-USA

Top 12 How To Get Broken Downstem Out Of Bong – Thư Viện Hỏi Đáp

Is Your Bong’s Downstem Stuck? Here’s How to Fix It

How to get a Stuck Downstem out of a Glass Bong

How to get a Stuck Downstem out of a Glass Bong

Leave a Comment Cancel reply