Top 15 How To Hang Led Lights Without Adhesive 8168 Good Rating This Answer

You are looking for information, articles, knowledge about the topic nail salons open on sunday near me how to hang led lights without adhesive on Google, you do not find the information you need! Here are the best content compiled and compiled by the Chewathai27.com team, along with other related topics such as: how to hang led lights without adhesive ways to hang led strip lights, attaching led strip lights to concrete, mounting putty for led lights, how to hang led strip lights without damaging wall reddit, mounting clips for led lights, how to hang led lights in bedroom, led strip lights non adhesive, how to paint around led strip lights

Contents

What can I use to stick LED lights to the wall?

Use your hands to mold a strip of putty to the desired shape and then push it onto the back of your LEDs. The strip can then be adhered to the designated surface. Alternatively, you could use cable ties to affix your LED strips to an object.

How do you stick LED lights without damaging walls?

Apply 3M adhesive to your home’s inconspicuous area, such as behind a cupboard or in a small nook. Leave it for a day or two, and then pull it off to see if it causes any damage to your paint or wallpaper. Have you tried removing LED strip lights in the past?

Can I put tape on my LED lights?

Clear packing tape can be used to secure LED strip lights. Packing tape will not cause a fire. Every other cause of fire can be prevented by adding a fuse before the LEDs.

Can you use double sided tape on LED lights?

The best double sided tape for an LED light strip is 3M VHB (Very High Bond) tape. This tape can be used in addition to the original adhesive backing on an LED strip light roll.

Why do my LED strip lights keep falling off?

Make sure to firstly clean the surface that the LED strips will be mounted onto from all dust, water, moisture, grease or otherwise. A cleaning agent such as Methylated Spirits or Rubbing Alcohol may be useful, but allow time to dry. You will need to use a dry and lint-free cloth to properly clean the surface.

Can you hot glue LED light strips?

Begin by putting an amount of hot glue on the cut end of the LED tape or at the cut point which needs waterproofing, and then slide the heatshrink over this. You can then heat up the heatshrink with a heat gun to tighten/contract the glue. This will reseal your LED tape back to its original IP67 rating.

Can you use glue on LED strips?

Silicon glue , it including the all advantages of PU glue and epoxcy glue ,which with good heat resistance , good low temperature resistance , good yellow degeneration resistance and low toxicity . The glue will not change yellow for use a long time and also good smell .

Do LED lights attract bugs?

LED bulbs are less attractive to bugs because they produce low heat and long wavelengths of light. Moreover, they produce little or no ultraviolet radiation. It makes them perfect for outdoor lights for events and around the home.

How long do LED strip lights last?

Most LED light strips can last anywhere between 20,000 hours and 50,000 hours. This depends on your specific installation, products used, how often you have them on and the manufacturer of the diodes. 50,000 hours equals 17 years of light output for 8 hours a day.

How do you hang LED lights without nails?

How to hang lights in a room without nails

Use adhesive clips. With damage-free adhesive hooks or clips, you can deck the halls without nails or stress. …
Drape on furniture. …
Wrap around banisters. …
Use brick and brick clips. …
From a curtain rod. …
Transparent tape. …
Wrap around household objects. …
Staples.

Can I use tape to hang string lights?

Tape the strands to the walls with a wall-safe transparent tape if the walls aren’t white. You might only need a piece of tape every five or six lights, or you might need pieces between each light or every two lights, depending on how heavy the strands are and how complex your hanging design is.

Can you put tape on rope lights?

Using Adhesive Tape:

Adhesive tape is one way of hanging rope lights on a wall. It has several benefits such as it is easy to buy and comes in many different forms, it’s strong and doesn’t require any tools or extra pieces, is cost-effective and can be used for up to 2 years.

How do you get LED tape off the wall?

To remove and restick LED light strips, unplug the light strip and then use a hairdryer to heat the adhesive backing. Then, you can carefully remove it from the wall without damaging the paint. After that, using an inexpensive double-sided sticky backing will allow you to mount the light strip somewhere else.

Can you put LED lights on drywall?

These drywall aluminum channels have an anodized finish that makes them resistant to the elements, rust, and corrosion, providing maximum protection to your LED strip lights. The winged designs of the channels make installation in drywalls both strong and secure.
…
Products.

QTY	Price per unit
3-4	$1.92
5+	$1.80

Light Strips Falling Down? Best Solution

Error 403 (Forbidden)

Article author: www.quora.com
Reviews from users: 27621 Ratings
Top rated: 3.5
Lowest rated: 1
Summary of article content: Articles about Error 403 (Forbidden) Updating …
Most searched keywords: Whether you are looking for Error 403 (Forbidden) Updating
Table of Contents:

Error 403 (Forbidden)

Article author: www.youtube.com
Reviews from users: 48443 Ratings
Top rated: 4.9
Lowest rated: 1
Summary of article content: Articles about Light Strips Falling Down? Best Solution – YouTube Updating …
Most searched keywords: Whether you are looking for Light Strips Falling Down? Best Solution – YouTube Updating Keep your light strips from falling down! The 3M tape on the back of light strips isn’t very strong, but I have some installation tips to help it last longer…how to install light strips, hanging light strips, install light strips, led strips falling off, led strips installation, how to install led strip lights, light strip hooks, light strips falling, light strips, led strips
Table of Contents:

Light Strips Falling Down? Best Solution - YouTube — Light Strips Falling Down? Best Solution – YouTube

Article author: ledlightinginfo.com
Reviews from users: 36456 Ratings
Top rated: 5.0
Lowest rated: 1
Summary of article content: Articles about How to Stick LED Strip Lights On The Wall: Step By Step Guide – LED & Lighting Info Updating …
Most searched keywords: Whether you are looking for How to Stick LED Strip Lights On The Wall: Step By Step Guide – LED & Lighting Info Updating Are you looking for color changing, low profile lights for your bedroom? There are LED strip lights for that. What about ambient task lighting to put around your kitchen cupboards? There are LED strip lights for that too. Whatever your requirements, the chances are that LED strip lights will provide a cost-effective, versatile, easy to
Table of Contents:

How To Stick LED Strip Lights On Wall

How to Stop LED Strip Lights From Falling Off The Wall

How To Restick LED Strip Lights

How To Stick LED Strips Without Adhesives

Frequently Asked Questions

Conclusion

About Me

Disclosure

How to Stick LED Strip Lights On The Wall: Step By Step Guide - LED & Lighting Info — How to Stick LED Strip Lights On The Wall: Step By Step Guide – LED & Lighting Info

Article author: ledlightinginfo.com
Reviews from users: 24434 Ratings
Top rated: 5.0
Lowest rated: 1
Summary of article content: Articles about Do LED Light Strips Damage Walls? – LED & Lighting Info Updating …
Most searched keywords: Whether you are looking for Do LED Light Strips Damage Walls? – LED & Lighting Info Updating When you’re living in rented accommodation, it can be challenging to put your mark on a place without permanent damage to fixtures and fittings. Modern leasehold law empowers landlords to deduct money from a tenants’ deposit if they create holes, cracks, or chips. Of course, nobody wants to lose money, so renters often feel restricted
Table of Contents:

What Adhesive Material Is Used On LED Strip Lights

What Type Of Wall Can Strip Lights Damage

Do LED Strip Lights Come Off Easily Without Peeling Paint

How to Remove LED Strip Lights From The Wall Safely

Final Words

About Me

Disclosure

Do LED Light Strips Damage Walls? - LED & Lighting Info — Do LED Light Strips Damage Walls? – LED & Lighting Info

Article author: www.youtube.com
Reviews from users: 42398 Ratings
Top rated: 3.1
Lowest rated: 1
Summary of article content: Articles about How to Hang String Lights or Rope Lights on Brick Without Drilling – Thrift Diving – YouTube Updating …
Most searched keywords: Whether you are looking for How to Hang String Lights or Rope Lights on Brick Without Drilling – Thrift Diving – YouTube Updating #ad – For more project ideas sign up to the Sugru newsletter here and get a 10% discount:https://sugru.com/newsletter?utm_source=Serena_Appiah&utm_medium=inf…DIY, Thrift Diving, thrift stores, home improvement, crafting, thriftdiving
Table of Contents:

How to Hang String Lights or Rope Lights on Brick Without Drilling - Thrift Diving - YouTube — How to Hang String Lights or Rope Lights on Brick Without Drilling – Thrift Diving – YouTube

Article author: lightovo.com
Reviews from users: 44593 Ratings
Top rated: 3.5
Lowest rated: 1
Summary of article content: Articles about How to stick led strip lights on wall without damaging paint? Apply a thin layer of silicone sealant to the back of your LED strip light(s) before sticking them onto the prepared surface–this will act as … …
Most searched keywords: Whether you are looking for How to stick led strip lights on wall without damaging paint? Apply a thin layer of silicone sealant to the back of your LED strip light(s) before sticking them onto the prepared surface–this will act as … How to stick led strip lights on wall without damaging paint?How to stick led strip lights on wall without damaging paint?
Table of Contents:

How to choose the best place for LED strip light

Prepare your led strip light for installation

Installation process

How to stick LED strip lights on walls without damaging paint

What if by sticking LED strip lights your paint was damaged

How do LED strip lights come off

Final words

How to stick led strip lights on wall without damaging paint?

Article author: www.wikihow.com
Reviews from users: 48382 Ratings
Top rated: 3.4
Lowest rated: 1
Summary of article content: Articles about 4 Ways to Install LED Strip Lighting – wikiHow Updating …
Most searched keywords: Whether you are looking for 4 Ways to Install LED Strip Lighting – wikiHow Updating If you’re looking to add colors or subtlety to a room, LEDs are a great choice. LEDs come in big rolls that you can easily set up even if you don’t have any electrical experience. A successful installation just takes a little bit of…
Table of Contents:

Steps

Community Q&A

Video
By using this service some information may be shared with YouTube

Tips

Warnings

Things You’ll Need

How to Stick LED Strip Lights On The Wall: Step By Step Guide

Are you looking for color changing, low profile lights for your bedroom? There are LED strip lights for that.

What about ambient task lighting to put around your kitchen cupboards? There are LED strip lights for that too.

Whatever your requirements, the chances are that LED strip lights will provide a cost-effective, versatile, easy to use solution. What’s not to love?

Most LED strips feature 3M adhesive backing. Once the surface is prepared and the strips cut to the correct size, the adhesive backing can be peeled off. Press the strip onto the designated surface using gentle pressure.

With LED strips, it couldn’t be easier to create the lighting effect you desire in your home or property. But it’s not always plain sailing.

LED strips often fall short when it comes to their adhesive backing – it’s not strong enough, doesn’t stick well, degrades over time, etc.

So I want to show you how to maximize the chance that your LED strips make a good bond with the surface they’re applied too.

Keep reading for my simple guide on how to stick LED strip lights to a wall, and what to do if you notice them drooping or peeling.

How To Stick LED Strip Lights On Wall

So you’ve just bought a 5-meter roll of LED strip lights, now what?

Let’s jump right in.

If you didn’t buy strip lights just yet, make sure you read my guide to LED strips lighting.

Step #1: Measure

The first thing you need to do is measure the area that you want to adhere the lights to. Use a ruler or tape measure to do this. No guesstimates.

Step #2: Cut to Size

If necessary, cut your LED strip down to the correct size. Use a sharp knife or pair of scissors for this.

Only cut at the designated cutting lines. Severing your strip in the wrong place can damage the circuitry and prevent some of the LEDs from working.

Remember, if you cut your LED strips you’ll probably need to solder a new connector cable.

Step #3: Prepare your Surface

The adhesive backing on LED strips performs best on smooth, clean surfaces. If grease or dust gets in the way, the connection between the adhesive and the surface is limited, and they are not able to form a strong bond.

To minimize this happening, dampen a cloth with warm water or rubbing alcohol and rub back and forth vigorously on the surface. Once you’re satisfied, dry the area with a lint-free rag or paper towel.

Step #4: Peel off the Adhesive Backing

Starting at one end of the strip, peel off the plastic sticker to reveal the adhesive backing. To prevent dust or debris in the air from sticking to the adhesive, only peel a little at a time.

Step #5: Position and Press

Position the LED strip in the correct place and use your hand to press it onto the surface. Continue to peel, position, and press until the entire length is stuck down. Take your time with this.

Step #6: Light Them Up!

Plug the connector cable into your power supply and turn your LED strip lights on!

How to Stop LED Strip Lights From Falling Off The Wall

Although 3M tape is considered the gold standard of adhesives, it is not invincible. LED strip lights are known for falling, drooping, and peeling off walls. So what can be done about it?

The secret is to play towards the strip lights’ strengths.

As I mentioned earlier, adhesives don’t bond well with rough, bumpy, or unclean surfaces.

So play to their strengths, only apply LED strips to smooth, flat surfaces that have been thoroughly cleaned.

If your surface is uneven, you might want to consider doubling up on adhesives or opting for a different LED light type.

Similarly, adhesives typically don’t perform well in humid and/or moist environments. Excess heat will alter the consistency of the adhesive, making it less durable.

Therefore, if you live in a hot country, it may be beneficial to install your LEDs near a window or AC vent.

The impact of gravity also means that LED strips fall down more often when placed on their sides or face downwards. If it’s not possible to install your strip lights facing upwards, you could try mounting clips or a mounting channel to add stability to your setup.

How To Restick LED Strip Lights.

If your preventative measures fail and your LED strips become unstuck, don’t worry! Thankfully, there are a few ways to rescue them.

It is up to you to decide whether to pull down the entire strip or just focus on the patch that’s lost its stickiness. Either way, the first thing you need to do is get rid of the old adhesive.

Unfortunately, the adhesive is not reusable – once it has formed a bond with one surface, it will be difficult to form another strong bond with a different surface.

To remove old adhesive, soak an old rag with acetone, Goof Off, WD-40, (Amazon) or a citrus-based cleaner and rub the adhesive vigorously. Be careful not to oversaturate and water damage your LEDs.

From here, you can select a new adhesive. This could be more W3 tape, extra-strong double-sided tape, Command strips, glue dots, or adhesive clips. The possibilities are endless.

How To Stick LED Strips Without Adhesives?

But what if you’re worried about the adhesive damaging your walls or furniture? Is there an alternative?

One solution is Loctite Fun Tak mounting putty. This is described as a moveable, versatile alternative to nails, glue, or staples.

Use your hands to mold a strip of putty to the desired shape and then push it onto the back of your LEDs. The strip can then be adhered to the designated surface.

Alternatively, you could use cable ties to affix your LED strips to an object.

Use clear ties to avoid disrupting the LED’s light output, the example of how not to do it is in the featured image of this post.

Lesson learned.

Understandably, this doesn’t apply to all scenarios – cable ties can’t be wrapped around your kitchen cupboards. Still, they can be fixed to your stairway banister.

Can You Staple LED Strip Lights?

As for stapling your LED strips, the answer depends on your staples’ width compared to the width of your lights.

If your staples are wide enough to fit over the LEDs like an archway, there should be no problems.

But if your staples are narrower and have to pierce through the LED strip, there’s a chance you could damage the inside circuitry and stop some of the lights from working.

Instead, you can use specially designed mounting brackets for light strips, just like this one from Amazon.

The only downside is that you need to drill the hole. So brackets will work well, if you plan to have your light strips mounted permanently.

Frequently Asked Questions

I’ve mentioned many different adhesives and tactics in this article, but some of you probably still have questions. So let’s dive in.

Can You Use Super Glue On LED Strip Lights?

If you want your strip lights to be stuck to a surface forever, you may be tempted to reach for super glue…

DON’T!

A little known fact is that super glue is unsuitable for use on materials such as plastic, polystyrene, and silk.

This is because the glue hardens through a chemical reaction that causes it to rapidly heat and cool. But this reaction causes certain materials to degrade over time.

Essentially, if your LED strips contain plastic, super glue has the potential to cause irreversible damage.

Can You Use Hot Glue?

With this in mind, is hot glue any better? Surprisingly, yes.

Hot glue doesn’t contain the same harsh chemicals as super glue, which means it is much safer and will not damage your LED strips.

The only thing to be wary of is the temperature of the hot glue. If it is too hot, you could melt through your LED strips. But this is unlikely to happen.

Conclusion

It’s easy to see why LED strip lights have revolutionized the way we light our homes. They’re immensely versatile, which means they can cater to any and all of your lighting needs.

While I agree that the W3 adhesive tape that is commonly used on LED strips could use some improvement, it could be a lot worse in honesty.

Which LED strip adhesives have you tried? Which did you have the most success with?

Drop a comment down below.

Do LED Light Strips Damage Walls?

When you’re living in rented accommodation, it can be challenging to put your mark on a place without permanent damage to fixtures and fittings.

Modern leasehold law empowers landlords to deduct money from a tenants’ deposit if they create holes, cracks, or chips.

Of course, nobody wants to lose money, so renters often feel restricted as to the customizations they can implement in their homes.

LED strip lights appear to offer a viable solution to this conundrum. They’re powerful enough to transform a room, making it feel homelier. Their adhesive, semi-permanent nature means they can easily be removed when it’s time to move out.

Are LED strip lights too good to be true?

LED strip lights are unlikely to damage walls, but this depends on various factors. The strength of their adhesive, the durability of paint or wallpaper, how long they’ve been applied for, and the climate can also impact how well LED strips bond to a surface.

If you’re thinking about purchasing LED strip lights, but you’re worried about damaging your walls, then listen up!

In this blog post, I’ll be talking about the type of adhesive used on LED strips, when LED strips are most likely to damage paint, and my fuss-free method for removing LED strips.

What Adhesive Material Is Used On LED Strip Lights?

Whether your LED strips are single-color, multi-color, 1 meter, or 10 meters, they probably all have one thing in common: they’re backed with 3M adhesive.

3M is the gold standard for adhesives – it’s known as the most durable tape on the market. This is because it’s made from high-performance acrylic.

Put simply, this acrylic is multi-faceted. It behaves like both a very viscous liquid and an elastic solid. This property is known as viscoelasticity.

Viscoelasticity allows the 3M adhesive to glide into irregularities and unevenness on the surface. It is applied to and form a very strong bond.

The result?

Durable LED strip lights can be fixed to a whole range of surfaces.

But, of course, 3M adhesive isn’t completely faultless.

Over time it loses stickiness, it doesn’t adhere well to glossy or oily surfaces. It doesn’t respond well to humidity and moisture. So 3M has its fair share of problems.

These flaws encourage people to take matters into their own hands. That is, by applying their own adhesives to LED strip lights.

I’ve seen people adopt all sorts of methods – foam tape, double-sided, glue dots, hot glue, and Gorilla tape, to name just a few.

Also read: Everything You Need To Know About LED Strip Lights

What Type Of Wall Can Strip Lights Damage?

Let’s face it, interior design is ever-changing. Your style and choices today are not the same as those of 1, 5, or even 10 years ago.

Does anyone else remember begging their parents to let them paint their bedroom a flamboyant color? How would you feel about that decision today?

You’re probably not going to want the same LED strip lights in the same position forever. So how easy is it to remove them once they have been stuck down?

The answer depends on the type of surface you adhere to.

If your wall is tiled, wooden, or plastic, you should have no problems. The strips will be relatively easy to peel off and will cause no damage to the wall.

If anything, there may be some leftover adhesive residue that needs to be wiped clean.

However, problems may arise if your surface is bare drywall, coated in paint, or wallpapered. These surfaces are made up of several fragile layers, so they are more prone to damage.

Ultimately, wallpaper is just paper. If you apply strong adhesive to any kind of paper, it will form a good bond. That’s why we use sellotape when wrapping presents!

But when it comes time to remove your LED strips, you’ll struggle to separate the two components. Your wallpaper will likely tear, rip, or ripple.

This will be particularly frustrating if your wallpaper is patterned because any gaps will become extremely noticeable. Similarly, because the wallpaper is patterned you can’t just cover it with paint to disguise the damage.

Ever wondered if your strip lights affect your pets? Find out in my article about dogs and strip lights.

Do LED Strip Lights Come Off Easily Without Peeling Paint?

On that note, you may be wondering how LED strips affect painted walls. Is paint more durable than wallpaper?

Again, it depends on the type of paint and the strength of the LED’s adhesive backing. Lots of different factors are at play here.

In simple terms, you need to work out how delicate your paint is.

Paint is not invincible, it ages and becomes more fragile over time. So paint that has been on the wall for several years is more likely to peel off with your LED strips.

Frustratingly, new paint isn’t the best option either. Although fresh paint may feel touch dry in around 24 hours, it usually takes between 2 and 4 weeks to fully cure.

If you apply LED strips to a newly painted wall, they will become part of the curing process.

Essentially, the bond between the LEDs and the paint will become stronger than the bond between the paint and the wall.

Unfortunately, that’s not all. The quality of your paint job will also have an impact. If you applied to paint on dusty, rusty, unprimed, or dirty walls, your paint would be compromised.

Your paint job will be much weaker and more susceptible to damage from LED strip lights. The wall itself will be perfectly fine, but a chunk of paint will be missing.

Related: Are LED Strip Lights Allowed In Dorms?

How to Remove LED Strip Lights From The Wall Safely?

I’m sure you can see that there are no hard and fast rules. Your LED strip lights are unlikely to damage if you apply them to a durable surface and rely on the 3M adhesive that they come with. But of course, nobody can be 100% sure.

Follow this easy step-by-step tutorial if you want to remove your LED strips while minimizing the risk of damage.

Unplug your LEDs from their power supply. Unless you know what you’re doing, you should never play with live electricity. You can use a hairdryer to heat the adhesive layer on the LEDs. This will make it softer and easier to pull off. Remember, LEDs excess heat can speed up lumen degradation. So with that in mind, use the hairdryer for a maximum of two minutes. Starting at a corner or edge piece, insert a flat, dull object (such as a butter knife or a credit card) under the LED strip. Wiggle the flat object to gently pry the LED strip from the wall. At the same time, use your other hand to slowly pull the LED strip off the surface. Continue until the LED strip is fully released. Remember to take your time. If there is a leftover tacky adhesive residue on the wall, gently rub your thumb over it in small circles. Most of the time, gentle pressure is enough to collect the residue. If this doesn’t work, apply a citrus-based hand cleaner or WD-40 to a rag and rub back and forth until the adhesive is gone.

Final Words

It’s true, LED strip lights are a dream come true for renters and people who enjoy frequently changing their interior design choices.

If you’re still unsure, you can always perform a patch test.

Apply 3M adhesive to your home’s inconspicuous area, such as behind a cupboard or in a small nook.

Leave it for a day or two, and then pull it off to see if it causes any damage to your paint or wallpaper.

Have you tried removing LED strip lights in the past? What products did you use? Let me know if you were successful or not in the comments section below.

How to stick led strip lights on wall without damaging paint?

The benefits of using LED lights in your room are well documented. However, some people are still not sure whether to use it or not. One of the main reasons is they are worried about whether LED lights will leave any marks on their walls or not but if you follow these steps rigorously, there should be no problem at all.

In this article, I’ll use a common example that could solve most LED light problems: How to stick led strip lights on walls without damaging the paint?

How to choose the best place for LED strip light?

First of all, you need to find a place where the LED light strip can be stuck without damaging the paint. Usually, this would be on the top of the wardrobe or on a shelf but if you’re not sure, use masking tape to test out different places. Make sure the place is dry and clean before hanging up the LED strip lights.

It’s not a good idea to put it directly onto wallpaper. If you want, tape up one end of the cable with tape and turn on the light to test if there’s any heating problem or flickering after placing/taping your LED strip lights.

How long do you want your strips to be?

This will decide the length and quantity of surface you need for sticking them. Here I have covered a common requirement of 35 cm * 3 meters which are perfect for a small bedroom.

Prepare your led strip light for installation

Cutting: Before cutting your led light strip, make sure that you’ve disconnected all things (i.e an extension cord)to avoid an accident; 1-meter shrink tube: cut shrink tube 1-2mm longer than led strip; sandpaper: sand both ends of tubes and 5mm long at each side of RGB joints; 4pcs 22uf capacitor:s solder it in series with the led strip.

The strip of wood or metal: Cut a strip of wood 35 cm long and 3 cm wide. You can also use a metal strip but make sure that it is not covered in paint or it will be difficult to stick the LED strip lights on the wall without damaging the paint.

Paint scraper: This is used to scrape off any paint that is on the surface where you will be sticking the LED strip lights on the wall without damaging the paint. If there is any old adhesive leftover from a previous light, this will also need to be removed.

Pencil: Draw a line where you want your LED strip light to be positioned on the wall.

Ruler or tape measure: Use this to measure and mark the height and width of your LED strip light.

Level: Make sure that your LED strip light is straight by using a level.

Screwdriver: If you are using screws to attach the LED strip light to the wood or metal, then you will need a screwdriver.

Drill (optional): If you are using screws to attach the LED strip light, then you will need to drill pilot holes first.

Jigsaw (optional): If you are cutting your own piece of wood or metal, then a jigsaw can be used.

Cordless drill/driver with screwdriver bit: This can be used as an alternative to a screwdriver.

Circular saw (optional): If you are cutting your own piece of wood or metal, then a circular saw can be used instead.

Installation process

Decide where you want to put your LED lights on the wall. It is best to use a level to make sure that the LED lights are straight. If you are not comfortable drilling holes in your wall then you can also screw them to the ceiling. You can see I have done that in my example below. Now it is time to measure the length of the LED light strip needed for your project. Make sure you make a note of the beginning and endpoint of your measurement so you know where to shut off the power when you are finished wiring them up. If using more than one LED strip, remember their total combined length has to be equal to or less than 3 meters (you can’t join multiple strips together). Once all measurements are complete–and if possible, with help from another person–start marking out holes on your wall in pencil with each measuring mark being 20cm apart in line with where you want your LED light strip to be placed. Please note that you will have to drill, cut or screw your chosen material in line with the pencil marks you just made. We would strongly recommend drilling a pilot hole first if possible before using a jigsaw or circular saw for cutting holes into your wall as large as the LED strip fitting–this should help minimize fraying and cracking of drywall/plasterboard surfaces around the edges of each hole you make. One may use a jigsaw because it’s easier and faster compared to using a circular saw which was my original plan but these tools can be substituted depending on what works best for you! Make sure you wear safety goggles while working with power tools. Line up your strip of wood or metal with the marks you’ve just made and using a paint scraper, scrape away any paint from the surface until it is completely clean and free from any debris. If your LED strip light has adhesive on the back, then also make sure that this side is facing the wall and not the wood/metal. Apply a thin layer of silicone sealant to the back of your LED strip light(s) before sticking them onto the prepared surface–this will act as an extra waterproofing barrier. Wait at least 2 hours for the silicone sealant to dry completely before plugging in your LED lights. Turn off all power to your circuit at the breaker box before connecting your LED light strip(s)–you can now plug them in and turn everything back on. You can use an extension cord or power strip to make this job easier for you. If you find that the LED lights are not straight after turning them on, then carefully remove them from the wall before rotating each strip of LED lights until they are perfectly straight (use a level if possible).

There you have it! How easy was that? A nice clean finish with no marks left behind on your walls despite having drilled fairly large holes into them earlier–this is thanks to our old friend, the silicone sealant!

How to stick LED strip lights on walls without damaging paint?

Paint can be damaged when adhering led strip lights to it. However, there are ways around this problem and you can install LED lights without taking the paint off.

There are 2 main problems with sticking standard led strip lights on paint or wallpaper. The first is that the adhesive used to stick them onto the wall will not adhere properly to the paint or coating of the wall and coverings such as wallpaper. The second is that most led strip light laminates use glue which emits volatile organic compounds (VOCs). These VOCs can damage some paints and coverings such as vinyl wallpaper. Avoid using superglue at all costs, it will surely damage the surface.

So how to put up led lights without ruining the paint? Let’s see what we can do:

The first issue is very easily solved by using an alternative adhesive for sticking your provided tape onto the surface you want to stick it onto. Silicone adhesives are perfect for this type of application.

The second issue is not quite as easy to solve but there are two main solutions: Don’t use the adhesive (this makes removing the led strip lights very difficult) or substitute your led strip light adhesive with a PVC-free version.

Both alternatives need more mechanical strength than normal so make sure that the alternative you choose actually works for you if you go down these routes. Always read instructions before applying silicone adhesive and ensure it is compatible with the LED strip light adhesive you intend on using! And don’t forget about health & safety when installing these kinds of products!

What if by sticking LED strip lights your paint was damaged?

If your paint was damaged when sticking the led strip lights on, don’t worry! You can just touch up any damage with some paint after the LED strip has been removed. Just remember to use acrylic-based paint since oil-based paints may cause problems for your new adhesive.

You can hide the damaged part with a poster, painting, or mirror. If the LED strip light is not going to be seen, then you don’t have to worry about this step!

How do LED strip lights come off?

If you decide that you want to take your LED strip lights off the wall, then it is very easy to do so. What you will need: a utility knife or a Stanley knife, a straight edge (a level is perfect for this), some patience, and a steady hand.

First, cut the adhesive tape on the back of the LED strip light using your knife. Take your time and make sure that you get as close to the LED strip light as possible.

Next, pull off the LED strip light from the wall–this can be a little tricky but if you have patience and a steady hand, then you will be able to do it. If the adhesive has been removed completely, then it should come off quite easily. If not, then use your straight edge to help pry it off gently.

Finally, clean any residue left behind on the wall with some hot water and a sponge. If there is any residue leftover, then you can touch up the paint with some acrylic-based paint or just get a new roll of wallpaper!

And that’s it! It’s pretty straightforward and hopefully, this guide has been useful. Remember to have patience and always avoid using oil-based paints when sticking LED strip lights on painted or papered walls–to be safe, use acrylic-based paint instead!

Final words

Sticking LED strip lights on walls without damaging paint can be a little tricky but with the right adhesive and a little bit of patience, it can be done! Make sure to read instructions carefully and always use acrylic-based paint if you’re not sure about the type of paint or wallpaper you have. Have fun with your new LED strip lights!

So you have finished reading the how to hang led lights without adhesive topic article, if you find this article useful, please share it. Thank you very much. See more: ways to hang led strip lights, attaching led strip lights to concrete, mounting putty for led lights, how to hang led strip lights without damaging wall reddit, mounting clips for led lights, how to hang led lights in bedroom, led strip lights non adhesive, how to paint around led strip lights

Top 15 How To Hang Led Lights Without Adhesive 8168 Good Rating This Answer

What can I use to stick LED lights to the wall?

How do you stick LED lights without damaging walls?

Can I put tape on my LED lights?

Can you use double sided tape on LED lights?

Why do my LED strip lights keep falling off?

Can you hot glue LED light strips?

Can you use glue on LED strips?

Do LED lights attract bugs?

How long do LED strip lights last?

How do you hang LED lights without nails?

Can I use tape to hang string lights?

Can you put tape on rope lights?

How do you get LED tape off the wall?

Can you put LED lights on drywall?

Error 403 (Forbidden)

Light Strips Falling Down? Best Solution – YouTube

How to Stick LED Strip Lights On The Wall: Step By Step Guide – LED & Lighting Info

Do LED Light Strips Damage Walls? – LED & Lighting Info

How to Hang String Lights or Rope Lights on Brick Without Drilling – Thrift Diving – YouTube

How to stick led strip lights on wall without damaging paint?

4 Ways to Install LED Strip Lighting – wikiHow

How to Mount LED Lights without Damage

How to Stick LED Strip Lights On The Wall: Step By Step Guide – LED & Lighting Info

3 Ways To Fix LED Strip Adhesive Not Sticking – DIY Smart Home Hub

Installing LED Flex Strips: Mounting Techniques – LEDSupply Blog

How to Stick LED Strip Lights On The Wall: Step By Step Guide

Do LED Light Strips Damage Walls?

How to stick led strip lights on wall without damaging paint?

Leave a Comment Cancel reply