You are looking for information, articles, knowledge about the topic nail salons open on sunday near me how to make my bow quieter on Google, you do not find the information you need! Here are the best content compiled and compiled by the https://chewathai27.com team, along with other related topics such as: how to make my bow quieter bow string silencers, limb dampeners for compound bow, 2022 bow stabilizer, how to silence a recurve bow, best bows of 2022, 2022 bow battle, bow accessories, 2022 compound bow releases
Contents
Why is my bow making noise?
The noise is coming from the arrow’s shaft rubbing against the bow shelf. A layer of bow shelf material (moleskin, bear or calf hair, or silicone) will make this noise go away. A “whistle” could mean that your string got un-twisted and it is too loose. The whistle is the air rushing through the strands.
What is the quietest type of bow?
- Alpine SS Stealth. I knew immediately when I shot this bow that it was the quietest. …
- Mathews Legacy. This new Mathews is not only one of the quietest bows on the market, but at 259 fps, it’s also a very fast one. …
- PSE Enforcer. …
- Hoyt VorTec. …
- McPherson 38 Special.
Why are recurve bows noisy?
Loose parts can cause vibrations that contribute to the loud sounds you’re getting upon release. There are several parts you’ll want to check for to make sure they are screwed on tightly. The two most common, however, are the stabilizer and the sights.
Do string silencers affect accuracy?
Yes, you will lose speed, likely not significant enough to change your 30-yard trajectory..if you regualrly shoot beyond that, you might notice a difference….as 60x mentiond there are a lot of other factors to consider but the fact is you will lose speed when you add “silencers” to your string.
What are the fuzzy things on a bow string?
The Bowjax String Silencers will reduce string noise by as much as 90%. That improves your chances of getting a good first shot at your intended prey. Once they are on you will really notice the difference in the noise level as you shoot. These tiny little silencers will do more than just help silence your bow too.
Do monkey tails slow your bow down?
Yes! They break easily, slow your string, and make $$$ for Mathews.
What happens if you put too much rosin on a bow?
Too much rosin will make the bow feel stickier as it moves across the strings. Excess rosin can generate a cloud of rosin dust as you play, and the sound will be harsh and scratchy. Rosin debris will fall onto the surface of the instrument and, over time, can damage the varnish and the wood.
Why does my compound bow squeak?
Four things usually cause squeaks on a brand new bow; burrs on spacer washers, loose screws on the draw length module, limb pivot fulcrum and limb pocket lock screws. First try to tighten the set screws that hold the module in place.
Are recurve bows quieter?
most modern recurves are quiet, hell most recurves and longbows are quiet compared to compound bows, i have a samick sage, and a hoyt tiburon, both are sound about the same…which is quiet….
How loud are compound bows?
The ambient level was around 43 decibels. The sound of the arrow hitting the wall, 20 yards away, was loud enough to register, but not the bow being shot. The measurement was taken at 1 meter from the bow.
Are longbows quieter than Recurves?
Yep, recurves tend to be louder than longbows. Limbs and ILF fittings rattle around, magnetic rests can be noisy, and tuning has a big effect as Sam and Greysides have already said. Compounds with parallel limbs, string stops, cable and string silencers are really quiet and fast.
What is the brace height on a recurve bow?
The vast majority of recurve bows have a brace height somewhere between 7.5 and 9.75 inches. The brace height of your bow will dictate some of its behaviors, such as how loud it shoots and how much pivoting your arrow will experience mid-air.
Why does my compound bow squeak?
Four things usually cause squeaks on a brand new bow; burrs on spacer washers, loose screws on the draw length module, limb pivot fulcrum and limb pocket lock screws. First try to tighten the set screws that hold the module in place.
Do monkey tails slow your bow down?
Yes! They break easily, slow your string, and make $$$ for Mathews.
How loud is a bow and arrow?
The ambient level was around 43 decibels. The sound of the arrow hitting the wall, 20 yards away, was loud enough to register, but not the bow being shot. The measurement was taken at 1 meter from the bow.
Hunting Tech Tip: How To Silence Your Bow – YouTube
- Article author: www.youtube.com
- Reviews from users: 12138
Ratings - Top rated: 3.2
- Lowest rated: 1
- Summary of article content: Articles about Hunting Tech Tip: How To Silence Your Bow – YouTube Updating …
- Most searched keywords: Whether you are looking for Hunting Tech Tip: How To Silence Your Bow – YouTube Updating This is a video by Lancaster Archery Supply demonstrating various ways to make your compound bow quiet for bowhunting.video, chia sẻ, điện thoại có máy ảnh, điện thoại quay video, miễn phí, tải lên
- Table of Contents:
Noisy Bows? Read me. | The Æthelmearc Gazette
- Article author: aethelmearcgazette.com
- Reviews from users: 30027 Ratings
- Top rated: 3.5
- Lowest rated: 1
- Summary of article content: Articles about Noisy Bows? Read me. | The Æthelmearc Gazette Updating …
- Most searched keywords: Whether you are looking for Noisy Bows? Read me. | The Æthelmearc Gazette Updating From Baron Caleb Reynolds: I would like to take a few minutes of your time to talk about strange noises that could occur while shooting your bow. Most bows make noise when you shoot them, but sometimes they start making strange noises which could mean a problem. I am not saying that every strange noise…
- Table of Contents:
~ Covering the Kingdom of Æthelmearc of the SCA
The World’s Quietest Bow | Outdoor Life
- Article author: www.outdoorlife.com
- Reviews from users: 31621 Ratings
- Top rated: 3.8
- Lowest rated: 1
- Summary of article content: Articles about The World’s Quietest Bow | Outdoor Life Updating …
- Most searched keywords: Whether you are looking for The World’s Quietest Bow | Outdoor Life Updating
- Table of Contents:
Links
Follow us
DISCLAIMER(S)
The World’s Quietest Bow | Outdoor Life
- Article author: archershub.com
- Reviews from users: 43954 Ratings
- Top rated: 4.0
- Lowest rated: 1
- Summary of article content: Articles about The World’s Quietest Bow | Outdoor Life Updating …
- Most searched keywords: Whether you are looking for The World’s Quietest Bow | Outdoor Life Updating
- Table of Contents:
Links
Follow us
DISCLAIMER(S)
7 steps to cut noise for a quieter hunting bow
- Article author: www.gohunt.com
- Reviews from users: 31017 Ratings
- Top rated: 3.7
- Lowest rated: 1
- Summary of article content: Articles about 7 steps to cut noise for a quieter hunting bow Rubber limb dampeners placed on the limb for a sol limb bow or in between the limbs on a split limb bow can reduce or eliminate any resual noise generated … …
- Most searched keywords: Whether you are looking for 7 steps to cut noise for a quieter hunting bow Rubber limb dampeners placed on the limb for a sol limb bow or in between the limbs on a split limb bow can reduce or eliminate any resual noise generated … Skills,tuning,practice,accuracy,technical,arrows,archery,bowhuntingNoise reduction options to make before hunting seasonhunting, hunts, hunt, big game, hunter, bowhunting, archery, tuning, silence, quite, technical, arrows, bows, rest, arrow rest, mole skin
- Table of Contents:
7 steps to cut noise for a quieter hunting bow
1 Start at the foundation
2 Limbs
3 Strings
4 String stop
5 Accessories
6 Arrows
7 Tune
Time to hit the range
Get Hunting Updates
5 Great Tips for a Deadly Silent Deer Hunting Bow
- Article author: www.deeranddeerhunting.com
- Reviews from users: 43135 Ratings
- Top rated: 4.4
- Lowest rated: 1
- Summary of article content: Articles about 5 Great Tips for a Deadly Silent Deer Hunting Bow It’s a great innovation, not only making these bows quieter but also … Owner/inventor Steve Sims quickly changed my mind by inviting me to … …
- Most searched keywords: Whether you are looking for 5 Great Tips for a Deadly Silent Deer Hunting Bow It’s a great innovation, not only making these bows quieter but also … Owner/inventor Steve Sims quickly changed my mind by inviting me to … Use this proven 5-step method for your bow to create a deadly-quiet bowhunting outfit that can help make you a deadlier predator during deer season.
- Table of Contents:
5 Great Tips for a Deadly Silent Deer Hunting Bow
Post navigation
Latest Articles
Best way to quiet bow | Rokslide Forum
- Article author: www.rokslide.com
- Reviews from users: 4688 Ratings
- Top rated: 4.4
- Lowest rated: 1
- Summary of article content: Articles about Best way to quiet bow | Rokslide Forum Will, First of all, a heavier arrow is the best way to make a bow quieter. Try a heavier broadhead and a stiffer spined arrow if you … …
- Most searched keywords: Whether you are looking for Best way to quiet bow | Rokslide Forum Will, First of all, a heavier arrow is the best way to make a bow quieter. Try a heavier broadhead and a stiffer spined arrow if you … Aside from shooting a heavier arrow, what’s everyone’s experience with the effectiveness of different silencing products. On my impulse, since I have a…
- Table of Contents:
See more articles in the same category here: 670+ tips for you.
The Æthelmearc Gazette
From Baron Caleb Reynolds:
I would like to take a few minutes of your time to talk about strange noises that could occur while shooting your bow. Most bows make noise when you shoot them, but sometimes they start making strange noises which could mean a problem. I am not saying that every strange noise means your bow is going to fail and that you should throw it away like a grenade with the pin removed. Some noises can be linked to simple issues that can be fixed easily.
Again, not every noise means that your bow is dying. Some bows are just noisy. If your bow suddenly starts clicking, buzzing, whistling, slapping, creaking, rattling, or making any strange noise that you have never heard coming out of your bow before, stop shooting and look at your bow or have a marshal take a look, for you.
A “thwack” is most likely the string hitting your sleeve. If you are wearing new garb to an event, garb that you’ve never worn on the range before, this can be an issue. If you have floppy sleeves, and don’t have an arm guard to keep the fabric out of the way, take a wide hair scrunchy and wear it on your arm. You might have to borrow one if you don’t have long hair.
A high-pitch “ripping” noise could mean that you loaded your arrow on the string wrong, and that the cock-feather is catching on the edge of the bow’s riser. If you keep doing this, you could have your cock-feathers stripped off of your arrows. I have seen/heard this on arrows that were fletched wrong.
A “scraping” noise can occur on bows without a separate arrow rest. The noise is coming from the arrow’s shaft rubbing against the bow shelf. A layer of bow shelf material (moleskin, bear or calf hair, or silicone) will make this noise go away.
A “whistle” could mean that your string got un-twisted and it is too loose. The whistle is the air rushing through the strands. Un-string the bow, completely, and twist the string back up. Re-string the bow and apply some bow wax to the entire string.
Or it could mean that the nock-point is loose and is spinning on the serving. The nock-point should be crimped firmly to the serving. This is an easy fix, crimp it down either with a pair of nock pliers, or a leatherman tool.
A “slapping” noise could mean that the string isn’t correctly seated. Check both ends of the bow and make sure that the string is not only seated properly around the horns, but that it is sitting in the grooves on both of the limbs. Check down the length of the bow and make sure that the limbs aren’t twisted. Twisted limbs can also cause a slapping noise.
A “bang” could mean a couple of things. If you hear a “bang” and the arrow goes a few feet down range, then it wasn’t nocked fully onto the string. If you hear a “bang” and the arrow goes all the way down range, but ends up higher than what you were expecting, then your string is either twisted way too tight, or you put on a string that it too short for your bow. This can happen if you carry a couple of bows in the same bag.
“Clicking” can be a major issue. One click at the same point of the draw could mean that an air pocket has developed within one of the limbs’s laminates. If it only happens once, at the same point, and never gets any louder, it could just mean an annoyance that might never get worse. It it gets louder, or if you hear multiple clicks, the limb could be slowly de-laminating (pealing apart).
A single “click” on a take-down bow could be either a limb isn’t fully seated in it’s socket. Or, it could mean that you didn’t tighten the thumb screws enough before you strung the bow. Finger tight is fine, but you have to tighten them before you string the bow. Or, it could mean that there is something in the socket, under the limb. Like dirt, or a wadded up sticker. Take the bow apart, check both sockets and limbs, then put it back together, string it, and see if it makes the same noise. Take-down bows can de-laminate just like one-piece bows.
Sudden creaking and groaning, when drawing the bow, could also mean de-lamination. Creaking noise when you draw the bow followed by the bow shaking in your hand, when you release, means that you should un-string the bow, ASAP.
I bring up the issue of noises, because I encountered a strange noise that I could not identify, with my take-down recurve, the other day. The bow started making a loud “click” at the 2 inch mark of the draw, but not when I backed off. It didn’t make the noise the week before. I was unable to figure out where on the bow the “click” came from and it persisted after I took the bow apart and put it back together. The bow was about 35 years old and I didn’t think that it was worth trying to fix. Oh, don’t worry; it’s not dead, I just sent the bow upstate to a farm so that it can run free. As nice as that bow was, I didn’t want to risk a catastrophic de-lamination while at full draw.
A sudden, new noise, accompanied by a radical change to where the arrow is going, could mean a bigger problem than just an annoying noise. It is your bow, and if you shoot it on a regular basis, you should be aware of any changes to how the bow feels in your hand and how it sounds. If you detect any changes, to the sound, feel, or how it shoots, please remember, your archery marshals are here to help.
Share this: Twitter
The World’s Quietest Bow
This test was set up to find the quietest bows currently on the market. We asked each company to send its quietest 70-pound, 30-inch-draw bow. The first round of testing was done with only a New Archery Products QuikTune 3000 rest and a nock set attached. A second test was run on each bow with string silencers installed.
Bow noise testing was conducted using a studio microphone connected through a sound card to a signal analyzer. A relative noise level was determined for each bow based on the test data. The equipment recorded the first 80 milliseconds (.08 seconds) after the string was released. (When a bow is fired an arrow stays on the string an average of .016 seconds.) I shot each bow several times in order to obtain an average reading. All testing was done during a single day without changing the test setup.
The arrow used was a Beman Carbonmetal Matrix shaft. With the point the arrow weighed 487 grains. It was unfletched because I wanted to reduce any noise that could be attributed to fletching contact with the rest. The shaft weighed almost exactly seven grains per pound of draw force, which is a typical arrow weight for most whitetail deer hunters.
I tested the bow right out of the box and with Sims String Leeches installed, because I felt it was valuable to know the noise levels of the bows when string oscillation was reduced. A position indicator assured that every shot was taken the same distance away from the microphone. I personally shot each bow to assure that consistent grip pressure was used throughout the test.
Bow noise results from the maximum amplitude of the initial sound of the bow limbs, the string coming back to its undrawn position and the amount of time it takes for the sound (vibration) to stop. To account for these elements, I used the average amplitude of all shots fired for each bow and the shape of the noise versus time curve to come up with the decay curve. This was done for each bow configuration. The bow that produced the smallest area represented the quietest bow. The data correlated very well with what I heard while doing the test.
There is a lot of variability in bow noise. For example, the same bow on back-to-back shots often had a slightly different noise level. And there is no question that two identical bows off the production line can have different noise levels. Be that as it may, of the bows I tested, none was quieter right out of the box than the Alpine SS Stealth. Here are the details on the top five.
Alpine SS Stealth
I knew immediately when I shot this bow that it was the quietest. When the bow was decked with string silencers to remove string oscillation, the Relative Noise Level dropped from 5.31 to 3.42-only slightly louder than someone clapping his hands from three inches apart. This is a very quiet system. The SS Stealth has a 36-inch axle-to-axle length and weighs 3.5 pounds. It features a 6.75-inch brace height, and at 259 fps it is among the fastest bows in this test.
Mathews Legacy
This new Mathews is not only one of the quietest bows on the market, but at 259 fps, it’s also a very fast one. The Legacy sports two innovations: a Cable Roller system that eliminates the need for a cable guard slide, and String Suppressors, which make the bow very quiet right out of the box. The Legacy possesses a low recoil design for comfortable shooting. It has an axle-to-axle length of 34 inches and a brace height of 7.5 inches.
PSE Enforcer
While PSE’s new Enforcer makes the top five out of the box, it shines even brighter when string silencers are installed. The Enforcer is equipped with PSE’s NV System, which is a vibration and noise-absorbing donut found on each limb bolt. It has an axle-to-axle length of 34 inches and a brace height of 8 inches and weighs 4.1 pounds.
Hoyt VorTec
Unfortunately, the Hoyt bow wee intended to test never arrived. As a result, I had to improvise by using one I found in the shop. It was a VorTec from the 2001 line. The VorTec I tested is very comparable to Hoyt’s 2002 CyberTec, which is purported to be even quieter. With silencers installed, the noise level of the VorTec dropped from 6.47 to 2.10, making it the quietest of all bows tested in that configuration.
McPherson 38 Special
With a speed of 260 fps with our test setup, the 38 Special was the fastest of the top five bows we tested, and at 38 inches, it was also the longest. The bow has a brace height of 7.25 inches and weighs 3.9 pounds. The 38 Special features McPherson’s exclusive VibX system, which is installed between the stabilizer insert and riser to help the bow soak up vibration and noise.
Recurve Bow Too Loud? Here’s How to Silence It
This post may contain affiliate links. If you make a purchase through a link, we could earn a commission – at no additional cost to you. This helps us stay afloat ⛵. It is appreciated.
While recurve bows tend to be louder than longbows due to their structure, archers may be surprised to find that their bow may create too much of a loud boom upon releasing the arrow when it shouldn’t. But how do you silence a recurve bow that’s too loud?
Archers can silence a recurve bow by using several accessories like different types of dampeners. But before doing that, the bow should be checked out and fine-tuned to make sure all the parts are in place and not causing unnecessary vibration.
Having said that, it’s always best to understand the number of possibilities causing the noise so you can find the best solution. In this article, we’ll cover the reasons why your recurve bow may be too loud with use and how to silence it.
What Makes Your Recurve Bow Too Loud?
To fix the issue adequately, you need to know what’s going on with your recurve bow in the first palace. If something is loose, out of place, or broken, it could also cause this unpleasant side-effect.
There are five main reasons why your recurve bow could be too loud:
Loose Parts
Length of String too Short or Long
Incorrect Brace Height
Runaway Strands
Unbalanced Tiller
Any of these five probable causes will make your recurve bow loud, signaling to you that something is off.
Loose Parts
Loose parts can cause vibrations that contribute to the loud sounds you’re getting upon release. There are several parts you’ll want to check for to make sure they are screwed on tightly. The two most common, however, are the stabilizer and the sights.
Stabilizer – Checking to see if the weights on your stabilizer are screwed on tightly is an excellent place to start. A stabilizer provides stability to your bow when shooting, and the weights help balance it. If these are loose and not put on correctly, the stabilizer won’t function properly and add unnecessary vibrations.
– Checking to see if the weights on your stabilizer are screwed on tightly is an excellent place to start. A stabilizer provides stability to your bow when shooting, and the weights help balance it. If these are loose and not put on correctly, the stabilizer won’t function properly and add unnecessary vibrations. Sights – Similar to the effect of the stabilizer, loose sights can also cause vibrations and increase the sound at the snap of the bow. Determining whether or not your sight is secure should be easy to figure out, as wiggling it with your hand will indicate if it is loose or tight.
Incorrect Length of String
The strands of a bow intertwine together so that they sit in the grooves of the limbs perfectly. When the strings are too long or too short, they can cause some different issues that may contribute to the sound your bow is making:
Too Long – If you haven’t twisted the strings together enough times, it can result in the string being too long and clogging too much of the groove up. The groove should allow for ¼ inch on both sides of the limb, indicating it’s a good fit. When you’ve clogged the track, it can lead to a noisy rattling sound when you shoot.
– If you haven’t twisted the strings together enough times, it can result in the string being too long and clogging too much of the groove up. The groove should allow for ¼ inch on both sides of the limb, indicating it’s a good fit. When you’ve clogged the track, it can lead to a noisy rattling sound when you shoot. Too Short – If the strings are too short, they will most likely detach themselves from the groove and limb but will not cause the same rattling noise. It could, however, contribute to other issues that are causing the noise.
Incorrect Brace Height
One of the most significant impacts on a recurve bow’s acoustics and sound is when the brace height is not set up following the manufacturer’s guidance. Having the right brace height can be compared to tuning a guitar; if not “in tune,” the sound is affected.
Runaway Bowstring Strand
This is not a super common issue but is still a problem that causes loud vibrations within the bow. A runaway strand is when the intertwined string has some loose strands and is not spun tight enough. It sort of looks like a braid when one of the hairs is popping out and isn’t tucked in place properly.
Unbalanced Tiller
The tiller is the difference between the upper limb to string distance and the lower limb to string distance. When the tiller is out of balance, it can cause extra vibration and shock, increasing the level of noise you hear with the release.
Positive Tiller – This is when the top limb from the string has a greater distance than the bottom limb from the string. A positive tiller is relatively standard with modern bows.
This is when the top limb from the string has a greater distance than the bottom limb from the string. A positive tiller is relatively standard with modern bows. Neutral Tiller – This is when the difference equals zero. Both sides are completely equal.
This is when the difference equals zero. Both sides are completely equal. Negative Tiller – This is when the top limb from the string has a closer distance than the bottom limb from the string.
If the tiller is out of balance, you can adjust it by either tightening the screws or changing its position according to the recommended manufacturer’s notes.
How to Silence Your Recurve Bow
While recurve bows definitely make noise, there are many ways to dampen or silence the sound. One of the most common ways to fix a bow that’s particularly too loud is by using a dampener. Other options include confirming you have the right arrows for your bow or tuning it.
Use Dampeners
A dampener for a recurve bow works just the same as a dampener for a tennis racquet; it’s placed on the equipment to limit vibrations and shock to the arm as well as reduce the sound. However, the difference between a tennis dampener and a bow dampener is there are many kinds and types to choose from when it comes to a bow.
Limb Dampeners
Limb dampeners are a great place to start because the strings tend to vibrate and hit the ends of a bow the most.
A limb dampener will reduce the noise to a certain degree, but it will also take out a good amount of shock and vibration that your arm bears when shooting. This helps limit fatigue, pain, and injury with recurve bows.
Riser Dampeners
Another place on the bow that can take quite a bit of punch is the riser. The riser is near the middle of the bow, where the grip is. Placing a dampener here can reduce the level of vibrations and noise the riser makes upon releasing the arrow.
String Silencers
The last sort of dampener is string silencers. There are plenty to choose from and many ways to use them; not a single one looks the same, and they all function a little differently but with the same goal in mind.
As you may have guessed, string silencers fit right on the string; one benefit of these silencers is that you have the flexibility to place them anywhere along it to reduce the most noise.
The following are a few recommended string silencer options:
STRING SILENCER DESCRIPTION WHERE TO BUY Bowjax 1036 These dampeners come in a pack of four, so you have the option to use multiple on your bow’s string as you see fit. They have a solid black color, so they blend in well without causing too much distraction. BUY ON AMAZON Mountain Man Beaver Balls Although these fuzzy silencers are on the more noticeable side, they’re just as effective as the last option and come in a pack of two to balance your string during use. BUY ON AMAZON Whisker Bowstring Silencers Made of rubber, these silencers come in a large 12 pack to use as many as you need on your bow’s strings. They are very lightweight and easy to install—just tie them on. No string removal is necessary. BUY ON AMAZON
Groove Silencers
Some groove silencers are explicitly made for recurve bows, making them a popular option for dampening down their sound. They sit right in the grooves on the limbs of your bow and are typically made of leather. Some may say they are similar to and sometimes interchangeable with limb silencers.
Although these silencers help reduce the slapping noise you get from a recurve bow, they will not reduce vibration. Therefore, these silencers are not fit for archers who wish to get a little relief in their arms in addition to eliminating loud noise.
Make Sure You Use the Right Arrows
Many archers automatically blame the bow if there is a large sound or a lot of noise upon releasing the arrow. However, although the bow is often the source of the issue, it’s also worth checking out the arrows you’re using as well.
Using the wrong arrows can produce unwanted noise, usually when they are too light. An arrow that is too light will send excess energy and vibrations down the bow, leading to damage to the bow and your arm later if not corrected.
However, this problem is the easiest to fix with a recurve bow, as you only need to replace the incorrect arrows with the right ones.
All bows from a manufacturer will have a manual or manufacturer guide that lists the recommended arrow weight for that specific bow; this is the easiest way to ensure you’re using the right arrows. If you no longer have the manual or purchased your bow without one from a third-party, you can also try experimenting with heavier arrows.
Tune Your Bow
As mentioned before, tuning the bow is similar to tuning a guitar. Once your recurve bow is in tune, the sound and acoustic may be more pleasant.
To get your bow tuned, you’ll need to adjust the nocking point location and brace height. Additionally, to confirm your bow is tuned correctly, you can perform the paper test. Let’s review these steps in detail:
Tuning the Nocking Point
The nocking point is essential to archery as it is where the arrow shoots from each time you release it. It’s usually about a half-inch above the shelf and provides a consistent place on the bow to place your arrow.
If the nocking point is not in an excellent position for the archer, it will continuously mess with their aim and interrupt the process of tuning other areas of the bow. With that said, when adjusting the nocking point, it’s essential to be precise.
To tune the nocking point, you will need a T-square. This tool will help measure the string distance and confirm the arrow’s resting point. Once the spot is selected, then you can use a copper-buckle to crimp-on the nocking point into place. Ensure that it is secure but do not force the nocking point on, as it might eventually break itself or damage the recurve bow.
Tuning the Brace Height
As mentioned earlier, the brace height is the distance between the grip or riser and the strings, and an incorrect brace height can result in bad shots and loud noises from your recurve bow.
To fine-tune your brace height, look at the length of the strings. If you need to decrease the brace height, then loosen the bowstrings by unwinding them; this will release the tension on the limbs, allowing them to expand and straighten the bow itself.
If you need to increase the distance of your bow’s brace height, do the opposite by winding the strings tighter, therefore making the strings shorter; this will increase the tension on the bow and its limbs, bringing the ends closer together and increasing the actual bow shape it has.
The process of tuning your recurve bow’s brace height will become involve a little bit of trial and error. Because this can quickly become frustrating for novice archers and those unfamiliar with this process, it may be best to seek a professional’s help to fine-tune your bow’s brace height for you.
The Paper Test
The Paper Test is a great way to check to see if all your bow tuning has worked. The process involves shooting your arrow through a single piece of paper, then analyzing the rip you made.
To set up the paper test, you just need to have a piece of paper handy and securely pinned onto a target for you to shoot at. The sheet needs to sit approximately eight feet away from you. Aim and shoot your arrow as you normally would through the paper.
Several types of rips will tell you your recurve bow’s status:
If the rip is above the contact point (where your arrow ultimately lands), your nock point is too high and needs to be moved down.
If the rip is below the contact point, your nock point is too low and needs to be moved up.
If the rip is to the left of the contact point, your rest point needs to be moved to the right; this also means that the bow’s spine is too weak.
If the rip is to the right of the contact point, your rest point needs to be moved to the left; this would mean that your spine of the bow is now too stiff.
Ultimately, the goal is to adjust your nock point and brace height to the point that the rip should be right in line with the arrow’s final contact point when you shoot through the paper.
Here is an excellent video by Clay Hayes that shows the whole bow tuning process:
Why It’s Important to Silence Your Recurve Bow
Sure, the loud snapping noise when shooting your arrows can be painful for the ears and eventually draw a headache. But by silencing your recurve bow, you actually reap a lot more benefits than just keeping things quiet for your own sake.
Avoid Scaring Animals When Bowhunting
If you bowhunt, then keeping things on the quiet side is a must. A loud bow will scare off prey immediately before your arrow can even come close to reaching them.
Reduce Arm Fatigue
The heavier the shock and the vibrations (and resulting loud noise) that shoot from your recurve bow to your arm, the quicker fatigue will set in. Most people think that by using lighter arrows and lightweight balancing, their arm won’t fatigue, but in reality, it is just the opposite.
Heavier arrows and weighted dampeners actually absorb the shock. Although this initial adjustment may feel challenging to wield at first, your arm will not have to brace your bow’s vibrations as much and will become less tired in the long run.
Prevent Injury
The injury that can come out of a loud bow is usually self-inflicted. The constant shock and vibration from a recurve bow can cause things like tennis elbow and golfers’ elbow, which can be quite painful. People will often compensate for whatever the bow is not doing, leading to wrong form and then eventually some sort of arm, shoulder, or elbow injury.
In Summary
Although a recurve bow is generally a lot louder than a longbow and other bow types, too much noise usually indicates that something may be wrong with your bow or the arrows you’re using.
The first step in fixing this issue is figuring out what the problem is in the first place. Several things could be wrong with your bow, from incorrect brace height to loose strands.
To best troubleshoot the issue, it’s usually better to start with the limbs and work your way towards the middle, addressing each component of your bow that could be contributing to the noise. Don’t forget to consider the arrows, too!
To quiet a loud recurve, you can use various dampeners like those mentioned above or try to fine-tune your bow and swap out the arrows you use.
So you have finished reading the how to make my bow quieter topic article, if you find this article useful, please share it. Thank you very much. See more: bow string silencers, limb dampeners for compound bow, 2022 bow stabilizer, how to silence a recurve bow, best bows of 2022, 2022 bow battle, bow accessories, 2022 compound bow releases
