You are looking for information, articles, knowledge about the topic nail salons open on sunday near me how to re lacquer a saxophone on Google, you do not find the information you need! Here are the best content compiled and compiled by the Chewathai27.com team, along with other related topics such as: how to re lacquer a saxophone how much does it cost to ‘re lacquer a saxophone, how to clean a tarnished saxophone, saxophone refurbishment near me, lacquered vs unlacquered saxophone
Contents
Can saxophones be re lacquered?
Relacquering requires buffing, which can affect the posts, hinge tubes, and the evenness of the tone holes. Uneven tone holes will need to be leveled by an experienced repairman and will add an additional out of pocket expense if you decide to purchase a relacquered sax.
Can a saxophone be refinished?
Finally, there is a restoration procedure that truly restores! By integrating plating prep and mechanical restoration, the Sax ProShop has developed a new technique for restoring and refinishing saxophones.
Does lacquer affect tone saxophone?
Lacquer is a liquid material that dries into a hard outer shell on a saxophone, offering protection and reducing maintenance costs, but it unfortunately doesn’t change the tone. There is a difference however between a lacquered instrument and an un-lacquered one.
How do you tell if a sax has been re lacquered?
Most horns darken with age so if the lacquer is really light in color it may indicate that it was relacquered. Engraving can sometimes be deceptive as some horns get the engraving redone after relacquer. Also look for orange peel or ripples in the lacquer.
How much does it cost to refinish a saxophone?
| SAXOPHONES | Average for Playing Condition | *Repad |
|---|---|---|
| Student B Flat Soprano | $80.00 | $490.00 |
| E Flat Alto | $80.00 | $490.00 |
| B Flat Tenor/ C Melody | $90.00 | $500.00 |
| E Flat Baritone** | $125.00 | $630.00 |
Can I spray paint my saxophone?
spray painting your alto sax won’t alter the tone just like a sax with nooks and scratches. What’s the most important is that the mouth piece is the tone pitcher of the sax any alto sax mouth piece can make the tone to the sax not the color, the color you may paint it to won’t affect the tone quality.
Can you Replate a saxophone?
Reassembling the Saxophone
Now the technician must reassemble the saxophone. Inevitably, keys are not going to fit perfectly as they did before going to the plater. Some are bent and they bind once the rod is inserted through. Silver now covers the key ends, so some keys no longer fit between the posts.
How do you polish an old saxophone?
- If you have an unlacquered, silver sax, apply a thin coat of metal polish to the affected area and buff with a soft cloth.
- If you have a lacquered saxophone, use a cotton swab to rub an equal parts water-alcohol solution over the area. Wipe dry and buff with a lacquer polishing cloth.
Do silver plated saxophones tarnish?
Silver plate tarnishes and rubber tends to speed up the tarnishing so if you have a hard rubber(ebonite) mouthpiece then that can speed up the tarnishing process.
Can I use Brasso on my saxophone?
Brasso is fine to use on brass.
There is a corrosion scenario which we should be aware of. Brass will form oxides which protect the copper and zinc from further corrosion. If brass is in a humid atmosphere with acid and ammonia present, that mixture will dissolve the surface corrosion on the brass.
What can I use to polish my saxophone?
Just use a soft cloth and any non-abrasive polish. The bottom line here though is that you need to avoid using any abrasive cleaning products so as to not damage the lacquer. So, stick to non-abrasive cleaning products and soft cloths.
Can you buff scratches out of a saxophone?
Distinguished Technician & SOTW Columnist. RIP, Yo. If the scratch is in the metal (rather than just in any lacquer) then you must thin the metal (and the surrounding metal) down to the thickness of the deepest part of the scratch, then re-finish the surface, whether it be plating or lacquer.
How do you Unlacque a saxophone?
To unlacquer do the thermal shock thing than weakens the lacquer (see previous step) in a big pot. you can submerge half saxophone and then turn and submerge the other half. After this lacquer peels even with the bare fingers. if you don’t have that big pot, you can use heat gun.
What is the difference between lacquered and unlacquered saxophone?
The obvious differences can be heard between lacquered and unlacquered saxophones. The unlacquered horns do have a more spread tone, which can be felt nearer the bottom register whilst the lacquered saxophones feel more focused and direct. However, this difference isn’t night and day.
Can you use Brasso on a saxophone?
Brasso is designed to remove tarnish from a variety of different metals but with all the intricate contours and metalwork with a saxophone, it would be much more work than you signed up for.
What to Consider When Buying a Relacquered Saxophone | Reverb News
- Article author: reverb.com
- Reviews from users: 19637
Ratings - Top rated: 4.0
- Lowest rated: 1
- Summary of article content: Articles about What to Consider When Buying a Relacquered Saxophone | Reverb News Updating …
- Most searched keywords: Whether you are looking for What to Consider When Buying a Relacquered Saxophone | Reverb News Updating To gain a better understanding of what to take into account when reviewing relacquered saxophones, we’ll take a look at how to spot and avoid a bad relacquer, the impact a relacquer has on the resale value of the saxophone, and whether you should consider purchasing a relacquered saxophone.
- Table of Contents:
What to Look for in a Relacquered Saxophone
A Relacquer Job’s Impact on Resale Value
At What Price Point is it Worth Considering a Relacquered Sax
Time to Buy
Restoration & Plating – Sax ProShop
- Article author: saxproshop.com
- Reviews from users: 45213 Ratings
- Top rated: 3.2
- Lowest rated: 1
- Summary of article content: Articles about Restoration & Plating – Sax ProShop Updating …
- Most searched keywords: Whether you are looking for Restoration & Plating – Sax ProShop Updating
- Table of Contents:
Does the Instrument Finish Impact Your Saxophone Sound? | Woodwind & Brasswind : The Music Room
- Article author: www.wwbw.com
- Reviews from users: 20113 Ratings
- Top rated: 3.7
- Lowest rated: 1
- Summary of article content: Articles about Does the Instrument Finish Impact Your Saxophone Sound? | Woodwind & Brasswind : The Music Room Updating …
- Most searched keywords: Whether you are looking for Does the Instrument Finish Impact Your Saxophone Sound? | Woodwind & Brasswind : The Music Room Updating Read an article about how finish affects the sound of your saxophone at WWBW.com. Woodwind & Brasswind’s Music Room has lots of helpful articles like this for musicians.
- Table of Contents:
Types of Saxophone Finishes
Lacquered vs Unlacquered Saxophones
How to Clean & Polish Brasswind Lacquer Finish Instruments – YouTube
- Article author: www.youtube.com
- Reviews from users: 20262 Ratings
- Top rated: 4.7
- Lowest rated: 1
- Summary of article content: Articles about How to Clean & Polish Brasswind Lacquer Finish Instruments – YouTube Updating …
- Most searched keywords: Whether you are looking for How to Clean & Polish Brasswind Lacquer Finish Instruments – YouTube Updating Clean & protect your lacquer finish on trumpets, saxophones, trombones & other brass and woodwind instruments with the easiest to use spray & wipe product. U…trumpet polish, tube polish, how to clean a trumpet, how to clean a saxophone, how to clean a trombone, brasswind instrument care, trumpet care, sax polish, musicnomad, brasswind lacquer care
- Table of Contents:
Re-lacquer – yes or no? | CafeSaxophone Forum
- Article author: cafesaxophone.com
- Reviews from users: 24859 Ratings
- Top rated: 3.6
- Lowest rated: 1
- Summary of article content: Articles about Re-lacquer – yes or no? | CafeSaxophone Forum I now have three vintage martin saxophones and am consering should I re-lacquer or not. Are there ant benefits or are there any downfalls? …
- Most searched keywords: Whether you are looking for Re-lacquer – yes or no? | CafeSaxophone Forum I now have three vintage martin saxophones and am consering should I re-lacquer or not. Are there ant benefits or are there any downfalls? I now have three vintage martin saxophones and am considering should I re-lacquer or not. Are there ant benefits or are there any downfalls? Should we…
- Table of Contents:
Restoration & Plating – Sax ProShop
- Article author: saxproshop.com
- Reviews from users: 48801 Ratings
- Top rated: 4.1
- Lowest rated: 1
- Summary of article content: Articles about Restoration & Plating – Sax ProShop In the band instrument repair industry, it is normal to repair saxophones mechanically, and then they are buffed until shiny. Buffing can be a damaging … …
- Most searched keywords: Whether you are looking for Restoration & Plating – Sax ProShop In the band instrument repair industry, it is normal to repair saxophones mechanically, and then they are buffed until shiny. Buffing can be a damaging …
- Table of Contents:
Plating A Saxophone
- Article author: musicmedic.com
- Reviews from users: 21353 Ratings
- Top rated: 4.6
- Lowest rated: 1
- Summary of article content: Articles about Plating A Saxophone Historically, players are fearful of re-plated and re-lacquered horns. … many saxophones were originally offered in both bare brass or lacquer as the more … …
- Most searched keywords: Whether you are looking for Plating A Saxophone Historically, players are fearful of re-plated and re-lacquered horns. … many saxophones were originally offered in both bare brass or lacquer as the more …
- Table of Contents:
Spot re-lacquer | Forums | Saxophone.org
- Article author: www.saxophone.org
- Reviews from users: 11692 Ratings
- Top rated: 4.0
- Lowest rated: 1
- Summary of article content: Articles about Spot re-lacquer | Forums | Saxophone.org Forum » Vintage Saxophones » Spot re-lacquer … This is clear lacquer, not gold dyed, so a color match isn’t going to take place( they do … …
- Most searched keywords: Whether you are looking for Spot re-lacquer | Forums | Saxophone.org Forum » Vintage Saxophones » Spot re-lacquer … This is clear lacquer, not gold dyed, so a color match isn’t going to take place( they do … Saxophone.org – created by saxophone players for saxophone players. Features an active saxophone forum, buy sell trade your sax, saxophone museum, sax teachers and more.
- Table of Contents:
About Relacquers | WWS
- Article author: worldwidesax.com
- Reviews from users: 47532 Ratings
- Top rated: 4.7
- Lowest rated: 1
- Summary of article content: Articles about About Relacquers | WWS About Relacquers | Fine Vintage Saxophones. … Sometimes when you see an ad, it will say Factory Relacquer…the reason this is desirable, is the factory … …
- Most searched keywords: Whether you are looking for About Relacquers | WWS About Relacquers | Fine Vintage Saxophones. … Sometimes when you see an ad, it will say Factory Relacquer…the reason this is desirable, is the factory … » About Relacquers | Fine Vintage Saxophones
- Table of Contents:
About Relacquers
More Relacquer Info
When in doubt it is probably a Relacquer
Here’s some of that Cut Look
1934 Conn Transitional Tenor
Bueschers in the 1930s
1930 Buescher True Tone Series IV Alto
Vintage Finishing Overhaul Saxophone With No Chemicals : 4 Steps (with Pictures) – Instructables
- Article author: www.instructables.com
- Reviews from users: 46930 Ratings
- Top rated: 4.8
- Lowest rated: 1
- Summary of article content: Articles about Vintage Finishing Overhaul Saxophone With No Chemicals : 4 Steps (with Pictures) – Instructables I wanted to restore the look of my old yamaha tenor saxophone because it was really ugly, for the lacquer being worn out. It also needed some pads to be … …
- Most searched keywords: Whether you are looking for Vintage Finishing Overhaul Saxophone With No Chemicals : 4 Steps (with Pictures) – Instructables I wanted to restore the look of my old yamaha tenor saxophone because it was really ugly, for the lacquer being worn out. It also needed some pads to be … Vintage Finishing Overhaul Saxophone With No Chemicals: I wanted to restore the look of my old yamaha tenor saxophone because it was really ugly, for the lacquer being worn out. It also needed some pads to be replaced. For this one I wanted a vintage look instead of just unlacquering and leaving the bare…
- Table of Contents:
Introduction Vintage Finishing Overhaul Saxophone With No Chemicals
Step 1 Test in the Neck
Step 2 Now Unlacquer Body
Step 3 Applying Vintage Finishing to Body
Step 4 Reassemble Repad Test
Be the First to Share
Recommendations
8 Comments
See more articles in the same category here: https://chewathai27.com/toplist.
What to Consider When Buying a Relacquered Saxophone
In all likelihood, you eventually won’t be playing the saxophone you started on as a young player. As you progress in skill, there will come a time where you will be in the market for a professional saxophone, whether new or vintage. One thing to look out for when shopping for an older horn is whether or not it’s been relacquered, which can save a rather significant amount of money up front, but may have initially hidden consequences.
To gain a better understanding of what to take into account when reviewing relacquered saxophones, we’ll take a look at how to spot and avoid a bad relacquer, the impact a relacquer has on the resale value of the saxophone, and whether you should consider purchasing a relacquered saxophone.
What to Look for in a Relacquered Saxophone
When looking at various relacquered saxophones online, it can sometimes be difficult to determine if the relacquer job was done well or not solely by looking at the pictures. Some items to take a closer look at are the finish, the engraving, and the tone holes.
Finish: Take a close look at the finish. Although this is not always the case, the finish on many relacquers can be much lighter (see picture 3) than an original finish (see picture 4). The finish on a poorly done relacquer will be more obvious, presenting as spotty in some areas.
Relacquered Finish Original Finish
From a playability perspective, the finish will not affect the overall sound, but from an investment standpoint, a bad relacquer job will make the saxophone much less desirable and should be reflected in the asking price.
Engraving: The engraving on a relacquered saxophone will appear faded and will feel very smooth to the touch. Much of this is due to buffing as well as the new coat of lacquer applied to the saxophone.
A saxophone that was relacquered well will still maintain much of the engraving (see picture 1), but the engraving on an instrument that was more heavily buffed will appear faded (see picture 2). As with the finish, the overall appearance and whether the engraving is visible or not will not affect the playability but it will affect the resale value.
A well relacquered saxophone with a clear engraving A heavily buffed relacquer with a faded engraving
Tone Holes: This may be the most important aspect to consider when reviewing a relacquered saxophone: the tone holes. Relacquering requires buffing, which can affect the posts, hinge tubes, and the evenness of the tone holes. Uneven tone holes will need to be leveled by an experienced repairman and will add an additional out of pocket expense if you decide to purchase a relacquered sax. If the buffing was not done well and the tone holes look very uneven, looking for another saxophone is the best move.
A Relacquer Job’s Impact on Resale Value
When a saxophone has been relacquered, there are fewer dealers who will consider purchasing the horn outright and will instead recommend selling it through consignment. The lower resale value is due to the common perception that a relacquered saxophone will not play as well as if it had maintained its original lacquer — which may be true to some extent. If a saxophone was relacquered improperly, a potential buyer will need to pour in a significant amount of time and money to get the horn into proper playing condition.
RELATED ARTICLE
At What Price Point is it Worth Considering a Relacquered Sax?
A relacquered saxophone should mainly be considered from a playing perspective. If you are in the market of buying and selling, consider purchasing a relacquered vintage saxophone only if you have the expertise to put the time into overhauling the instrument, effectively fixing any issues that occurred during the relacquering process.
You can expect a relacquered job to depreciate the value of a sax by 40-50% on average, with a couple factors at play that could swing that number in either direction; when and by whom the relacquering was done, the manufacturer, serial number, mechanical wear, and most importantly, how the saxophone sounds. All of these factors should be taken into consideration when checking out relacquered saxophones because once you are paying more $4,000, there are many other professional instruments on the market that can be bought new and would prove worthwhile purchases.
Time to Buy
If the relacquered saxophone needs some serious repair work, it may take up to $1,000 or more in addition to the purchase price of the saxophone to get it up to snuff. Although many players view relacquered saxophones as inferior and not worth considering, there are vintage saxophones that were properly relacquered and have resulted in truly spectacular instruments that play just as well as new or untouched horns.
The hesitation many feel when considering a relacquered saxophone is understandable, but I have tried various relacquered vintage altos and tenors that played incredibly well, despite my initial instinct to push them aside. Whether you choose to purchase a relacquered saxophone to play or as an investment, this information should provide you with the tools to make an educated decision.
Saxophones
Restoration & Plating – Sax ProShop
Finally, there is a restoration procedure that truly restores! By integrating plating prep and mechanical restoration, the Sax ProShop has developed a new technique for restoring and refinishing saxophones.
The Silver Uberhaul: The replating is done in conjunction with your Uberhaul. It includes all of the same goodness of the Uberhaul, and it will look better than ever with a satin silver finish and gold wash in the bell.
Who would benefit from silver plating?
The original silver plate has worn away, with many patches of bare brass showing
You believe the lacquer on your saxophone muffles its resonance
The current lacquer is flaking away or gone
The saxophone was poorly re-lacquered at some point in the past
You’re a star, and your horn needs to dazzle as much as your playing
Why Are Our Re-plates So Good?
In the band instrument repair industry, it is normal to repair saxophones mechanically, and then they are buffed until shiny. Buffing can be a damaging process, and it can undo some of the work that the technician just did. In these cases, it will look fantastic once plated, but is mechanically out-of-whack. Technicians in high-volume shops don’t always have much choice in the manner, as many need to do the process quickly in order to keep up with work load and keep prices lower.
The advantage of the Sax ProShop is that since we complete our work assembly line style, we were able to fully integrate the plating process in with the Uberhaul. The end result after much research and hard work is that every single step along the way has been carefully considered in relation to what happens before and after.
Because the process of buffing is damaging, we have made the decision that we only offer satin finish which doesn’t remove any metal. A select few spots, such as the engraved area, the insides of the bell, and body bands will be polished and then masked off before the satin finish is applied. The satin finish makes the select bright highlights and engraving stand out and shine.
Once all of the body work and key work has been completed in the Uberhaul process, the bright highlights are polished and the bell is re-engraved. Next, the engraving and smooth highlights are masked and the body is given a classic satin finish with our proprietary blend of media. The media does not remove metal from the body: it simply changes the surface of it. At this point, the tone holes are leveled and the instrument is cleaned and ready for plating. With every single bit of work done carefully and meticulously already, the ONLY thing that happens at the plater is the actual application of silver to the keys, neck, and body. Everything comes back fitting exactly as it did when it was sent out, and the Uberhaul process continues as usual.
Our unique and proprietary refinishing service extends the life of an instrument and makes it a work of art, so at the end of your Uberhaul, your saxophone looks just as good as it sounds.
The Process:
Remove Springs
Strip Lacquer
Level Pad Cups
Cut Buff Keys
Straighten Body
Remove Dents
Add Modifications (if desired)
Remove Bell
Cut & Color Buff Bell & Smooth Highlights
Mask Smooth Highlights
Send Bell To Engraver (2 Weeks Turnaround)
Align Posts/Straighten Keys
Reattach Bell
Remove Old Pearls & Fit New Pearls
Key Fitting
Add Materials
Dry Fitting
Color Buff Keys, Degrease, Test Fit
Mask Engraving, Bell, and Smooth Highlights
Sandblast
Final Test Fit
Level Tone Holes
Clean/Degrease
Pack Body & Keys for Plating
Send to Plater (2 Weeks Turnaround)
Unpack and Check
Install New Pearls
Install Springs
Continue with Materials, Padding, Set-Up, and Tuning and Toning for Silver Uberhauls
Re-lacquer – yes or no?
Back in the old days it would’ve been unthinkable for a sax player to turn up for a gig with a grungey looking instrument. Musicians in big bands had to dress smart and look classy, so it wasn’t uncommon for instruments to be relacquered when they were taken in for an overhaul, or sent back to the factory to be refurbished. Factory relacquers often involved getting all the scratches out first…If it was just a matter of stripping the old lacquer and polishing it up ’til it’s nice and shiny, relacqering wouldn’t have gained such a bad reputation, but it’s when people have tried to polish out deep scratches that the problems occur. The over enthusiastic use of buffing wheels and abrasive compounds will inevitably remove metal and this can cause problems.Many years ago a friend of mine had an old Conn alto that had been relacquered and the bell had been heavily buffed on one side, enough to remove half the engraving. When you played it, low B and Bb had a strange warbling quality. His sax tech did his best, but came to the conclusion that the thinning of the metal on one side of the bell was the cause of the problemhere’s a close up of a Martin tenor that’s been nearly ruined by over use of abrasives – http://www.lynsgarden.co.uk/Rosecroft/Saxes/Martin/Buffing_Error.jpg – “Enormous groove buffed out of body metal just under top thumbrest. Metal left paper thin. Excessive buffing on parts of body and bell”THese days I doubt any sax repairer would do this to a sax and would choose to leave the deeper scratches alone, or gently burnish them so they’re less noticeableI suspect a lot of the market for expensive vintage musical instruments lies with collectors rather than pro players – how many working sax players are rich enough to afford 5 grand for a Mk VI or 1000 dollars for a Florida Link, let alone the insurance risk of taking them on gigs…but back to the original point of this thread, I think relacquering is largely a matter of economics – do you really want to spend a few hundred quid on getting a sax relacquered, or would you rather spend the money on something else?I’d love to get my Martin Indiana restored to original condition, but I’ve just had the gas bill…
So you have finished reading the how to re lacquer a saxophone topic article, if you find this article useful, please share it. Thank you very much. See more: how much does it cost to ‘re lacquer a saxophone, how to clean a tarnished saxophone, saxophone refurbishment near me, lacquered vs unlacquered saxophone
