You are looking for information, articles, knowledge about the topic nail salons open on sunday near me how to remove copper from ballast on Google, you do not find the information you need! Here are the best content compiled and compiled by the Chewathai27.com team, along with other related topics such as: how to remove copper from ballast ballast recycling, fluorescent ballast recycling near me, how to remove copper from transformer, how to remove copper from stator, home depot ballast recycling, how much copper is in a ballast, pcb ballast, how to remove copper from armature
Contents
Are old ballasts worth money?
Depending on their age, and their casing, even if they have to be scrapped, ballasts can be worth a couple of dollars. According to current listings, if you can resell one that’s in fantastic condition, you can often get $13 to $20 for the average ballast! These are ones in great condition.
What can I do with an old ballast?
They aren’t hazardous when used as intended, as long as they don’t leak. You may be able to dispose of a few intact ballasts containing PCBs the same as ordinary trash or at a household hazardous waste collection event or drop-off location sponsored by your county, city, or waste disposal district or company.
Is it worth taking copper out of electric motor?
…
| Scrap Metal | Scrap Price | Updated Price Date |
|---|---|---|
| Copper National Average | $2.85/lb | Updated 07/08/2022 |
| Steel National Average | $130.00/ton | Updated 07/08/2022 |
How many pounds of copper is in a transformer?
Typically it will weigh anywhere from 500-1,200 pounds depending on the size. Weigh Your Coils – Aluminum coils will weigh much less compared to copper, but you can expect anywhere from 100-250 pounds of Aluminum and 150-350 pounds of Copper depending on the size of the unit.
What percentage of a transformer is copper?
Rahangdale says, In a typical large transformer, 50% of the cost is in materials. Of that, about 15% to 20% is for copper and an equal percentage is for steel structural members and core laminations with the remainder in oil, insulation and the rest.
Does my ballast contain PCBs?
Do My Fluorescent Light Ballasts Contain PCBs? Ballasts manufactured through 1979 may contain PCBs. Ballasts manufactured between 1979 and 1998 that do not contain PCBs are labeled “No PCBs” If a ballast is not labeled “No PCBs”, it is best to assume it contains PCBs.
How much copper is in a transformer?
Typically it will weigh anywhere from 500-1,200 pounds depending on the size. Weigh Your Coils – Aluminum coils will weigh much less compared to copper, but you can expect anywhere from 100-250 pounds of Aluminum and 150-350 pounds of Copper depending on the size of the unit.
How do you recycle transformers?
- Remove the transformer from the device or appliance. …
- Grab a magnet and see which parts are steel on the outside.
- Now use a metal file to figure out the type of wire on the inside. …
- Once you have the separated you can scrap the transformers as a whole unit with most scrap yards.
What is a ballast in a boat?
Ballast, other than cargo, may be placed in a vehicle, often a ship or the gondola of a balloon or airship, to provide stability. A compartment within a boat, ship, submarine, or other floating structure that holds water is called a ballast tank. Water should move in and out from the ballast tank to balance the ship.
MBMMLLC.com: Scrapping/recycling light ballasts for copper, transformers, and circuit boards – YouTube
- Article author: www.youtube.com
- Reviews from users: 6464
Ratings - Top rated: 4.6
- Lowest rated: 1
- Summary of article content: Articles about MBMMLLC.com: Scrapping/recycling light ballasts for copper, transformers, and circuit boards – YouTube Updating …
- Most searched keywords: Whether you are looking for MBMMLLC.com: Scrapping/recycling light ballasts for copper, transformers, and circuit boards – YouTube Updating This video is for Moose Scrapper. He suggested some light ballasts would be good to run through the hammer mill. The hammer mill beat them up in a hurry an…Printed Circuit Board, Copper (Chemical Element), Scrap, Recycling (Industry), Transformer (Invention), Transformers, Copper wire, copper transformers, scrapping ballasts, scrap metal, recycling transformers, light ballasts, Hammermill, hammer mill, how to, make money, scrap copper, how to scrap, recycling business, scrap copper prices, how to scrap metal, PCB, pcb recycling, urban mining, urban mining for copper, scrapping copper, copper recycling, scrapping circuit boards
- Table of Contents:
How Much Copper in a 400W HID Ballast? – YouTube
- Article author: www.youtube.com
- Reviews from users: 6958 Ratings
- Top rated: 4.2
- Lowest rated: 1
- Summary of article content: Articles about How Much Copper in a 400W HID Ballast? – YouTube Updating …
- Most searched keywords: Whether you are looking for How Much Copper in a 400W HID Ballast? – YouTube Updating I always say there should be about 3 pounds of copper in a 400W HID transformer if both windings are copper! Well here is some proof !video, chia sẻ, điện thoại có máy ảnh, điện thoại quay video, miễn phí, tải lên
- Table of Contents:
Removing copper from electric motors the easy way. – YouTube
- Article author: www.youtube.com
- Reviews from users: 39926 Ratings
- Top rated: 4.0
- Lowest rated: 1
- Summary of article content: Articles about Removing copper from electric motors the easy way. – YouTube Updating …
- Most searched keywords: Whether you are looking for Removing copper from electric motors the easy way. – YouTube Updating via YouTube CaptureYouTube Capture, Electric Motor (Engine Category), Copper (Chemical Element), Way, Always, Gotta, Easy, scrap, metal, copper, money, extra, Out, Own, Easy (The Easybeats Album), Money (The Office)
- Table of Contents:
How to scrap transformers for copper – YouTube
- Article author: www.youtube.com
- Reviews from users: 41941 Ratings
- Top rated: 3.8
- Lowest rated: 1
- Summary of article content: Articles about How to scrap transformers for copper – YouTube Updating …
- Most searched keywords: Whether you are looking for How to scrap transformers for copper – YouTube Updating This is in my opinion the fastest way to remove copper out of different types of transformersHow to scrap a transformer for copper, how to recycle a transformer, how to recycle a transformer for copper, how to scrap a transformer, how to remove copper from a transformer, scrapping copper, recycling, transformer, making money scrapping copper, scrapping, cash for copper, how to get copper out of a transformer
- Table of Contents:
Fluorescent fixture ballasts. Safe to disassemble?
- Article author: www.scrapmetalforum.com
- Reviews from users: 18308 Ratings
- Top rated: 4.1
- Lowest rated: 1
- Summary of article content: Articles about Fluorescent fixture ballasts. Safe to disassemble? I want to see what’s in them, and how long it takes to extract whatever IS … Remove the ballast from the fixture, get all the copper wire, … …
- Most searched keywords: Whether you are looking for Fluorescent fixture ballasts. Safe to disassemble? I want to see what’s in them, and how long it takes to extract whatever IS … Remove the ballast from the fixture, get all the copper wire, … Notice I did not ask if it was worth it to disassemble them… I just want to know if it’s SAFE to do so. I read a bit on wikipedia, and it appears there used to be PCBs in them (poly-chlorinated biphenyls… not printed circuit boards!) until about 1979. This fixture appears to be more recent than that, but I can’t be absolutely certain. My yard pays .20# for ballasts as is. I want to see what’s in them, and how long it takes to extract whatever IS in them, and how much THAT’S worth, then do
- Table of Contents:
Fluorescent fixture ballasts Safe to disassemble
The Following User Says Thank You to Mick for This Post
The Following 2 Users say Thank You for This Post by ryanw
The Following 2 Users say Thank You for This Post by Mechanic688
The Following 2 Users say Thank You for This Post by unitsngold
The Following User Says Thank You to eesakiwi for This Post
The Following User Says Thank You to Greybeard for This Post
The Following 2 Users say Thank You for This Post by eAlchemist
The Following User Says Thank You to 77bronco87 for This Post
The Following 2 Users say Thank You for This Post by ozzy214
Copper from ancient fluorescent ballasts. | Gold Refining & Metal Extraction Forum
- Article author: goldrefiningforum.com
- Reviews from users: 17493 Ratings
- Top rated: 3.4
- Lowest rated: 1
- Summary of article content: Articles about Copper from ancient fluorescent ballasts. | Gold Refining & Metal Extraction Forum Copper from ancient fluorescent ballasts. … A lot of the transformer type fluorescent lighting ballast has a coated layer of tar, … …
- Most searched keywords: Whether you are looking for Copper from ancient fluorescent ballasts. | Gold Refining & Metal Extraction Forum Copper from ancient fluorescent ballasts. … A lot of the transformer type fluorescent lighting ballast has a coated layer of tar, … Hope everyone is having a good fall! Personally I just had a ton of work done out at my grandparents’ estate. Replaced (or bypassed) every single…
- Table of Contents:
Join the conversation!
Don’t like ads
Ballasts Scrap Prices
- Article author: rockawayrecycling.com
- Reviews from users: 46909 Ratings
- Top rated: 3.4
- Lowest rated: 1
- Summary of article content: Articles about Ballasts Scrap Prices Electronic and copper-based ballasts. … Make sure to remove them from the lighting fixture and cut wires off as well. We will never take the entire unit … …
- Most searched keywords: Whether you are looking for Ballasts Scrap Prices Electronic and copper-based ballasts. … Make sure to remove them from the lighting fixture and cut wires off as well. We will never take the entire unit … Ballasts come from inside of lighting fixtures and there generally are two types. Electronic and copper-based ballasts.
- Table of Contents:
Scrap Prices
CURRENT PRICE
$003lb
30 DAY AVG PRICE $009lb
Historical Prices for Ballasts
Recycling Scrap Ballasts In New Jersey
Make Money Scrapping Fluorescent Light Ballasts: Recycle Ballast Guide
- Article author: www.trendsandtactics.com
- Reviews from users: 35395 Ratings
- Top rated: 5.0
- Lowest rated: 1
- Summary of article content: Articles about Make Money Scrapping Fluorescent Light Ballasts: Recycle Ballast Guide Most good ballasts have a couple of dollars of copper and iron within them. You can extract these safely, but be completely sure that they … …
- Most searched keywords: Whether you are looking for Make Money Scrapping Fluorescent Light Ballasts: Recycle Ballast Guide Most good ballasts have a couple of dollars of copper and iron within them. You can extract these safely, but be completely sure that they … Recycling ballasts for cash is a great to earn extra money. If the fluorescent light ballast is in good condition they could even sell online.
- Table of Contents:
Can You Recycle a Ballast
Do Ballasts Have Scrap Value
Who Buys Ballasts
Where to Scrap Ballasts
Make More Money Scrapping Ballasts
A Guide for ship scrappers : tips for regulatory compliance – Google Sách
- Article author: books.google.com.vn
- Reviews from users: 40242 Ratings
- Top rated: 4.4
- Lowest rated: 1
- Summary of article content: Articles about A Guide for ship scrappers : tips for regulatory compliance – Google Sách Updating …
- Most searched keywords: Whether you are looking for A Guide for ship scrappers : tips for regulatory compliance – Google Sách Updating
- Table of Contents:
Lighting Waste Disposal – Google Sách
- Article author: books.google.com.vn
- Reviews from users: 25535 Ratings
- Top rated: 4.8
- Lowest rated: 1
- Summary of article content: Articles about Lighting Waste Disposal – Google Sách Updating …
- Most searched keywords: Whether you are looking for Lighting Waste Disposal – Google Sách Updating
- Table of Contents:
See more articles in the same category here: https://chewathai27.com/toplist.
Fluorescent fixture ballasts. Safe to disassemble?
Check the label to see if it’s marked with any of “no PCB’s” or “PCB free” or anything similar. If its not marked, and thus contains PCBs; I was told the PCBs are only contained in the capacitor inside the ballast, same big aluminum can style as you find inside a microwave . The tar encasing everything is apparently PCB-free. This is according to a couple of old-timer electricians who were working during the years they switched over. Myself, if they’re not clearly marked PCB-free, I’m health conscious enough and lazy enough to just ship them out as-is.Edit to add; there seems to be 2 common sizes I run across, the smaller are approx. 2″H x 3″W x 10″L, larger are about 2 1/2″H x 4″W x 12″L, both sizes are a guess as I’m going off memory. The larger ones 1 break down as you get about 1.5 lbs of #2 copper. The smaller ones I’ll set aside until I have nothing to do, or sometimes I’ll hire a friend who needs a few $$ to do some. Smaller ones average just over a 1/2 lb of copper. Like Mick said, sometimes you can get alum windings instead of copper. If you check one set of windings and it’s alum, check the 2nd set as well. Having one copper and one aluminum isn’t uncommon.Having a bench vise to work on these makes it many times quicker and easier. I do them like an assembly line. Take a bunch out of the housings, then de-tar that batch, and then finally beat/slide/cut the windings off the steel. This is what I’ve found works easiest for me. I can get about 12-15 an hour doing it this way. Good luck!
Copper from ancient fluorescent ballasts.
The lighting transformers we are talking about do not contain PCBs, as you can find in other types of oil-filled type transformers.
As with gold, every tiny bit adds up, Ohh how many days have I spent in freezing cold river water to pan a few tiny flakes of gold, that was not worth all of the time or trouble spent.
Over the years that little bit adds up, maybe not to be that much in total, but now, when I look at it and with all of that work is already done.
I have something today, to show for that wasted time spent, no I cannot say it is profitable, or really worth the time and effort spent.
Not everything I do is for profit, and many things may not be worth the effort or time spent, I do consider it worth it, besides look how much fun I had, spending my spare time on something not worth it, like stocking up a scrap metal pile, and a few metals which hold enough value to buy bread someday in possible hard times ahead, instead of spending my spare time sitting at a computer screen, or in front of a tv screen…
Ballasts Scrap Prices
Rockaway Recycling accepts ballasts for scrap metal. Coming from light fixtures it is important to know what you can do with them when you are looking to scrap them. Ballasts come from inside of lighting fixtures and there generally are two types. Electronic and copper-based ballasts. At Rockaway Recycling we are interested in buying the copper-based ballasts and we want to make sure that they are ones that do not contain PCBs. Make sure to remove them from the lighting fixture and cut wires off as well. We will never take the entire unit as-is nor do we want any of the glass. Be sure to remove all glass before coming to our facility, otherwise, we may not be able to get the full price for them.
Recycling Scrap Ballasts In New Jersey
If you are an electrician or a contractor with a bulk load of ballasts for scrap, Rockaway Recycling can help you scrap the large quantity you have with our container and pick up services. We can provide you with barrels, boxes, or a steel dumpster for your scrap ballasts and any other scrap you may have. If you want to schedule services with us, you are more than welcome to contact us and ask about our pick up services in New Jersey and the Tri-State area. Remember we also offer special scrap pricing for electricians on our website for other metals like copper wire, cable, and more.
Ballasts Historical Scrap Prices
Our customers are always asking about our current prices and we have been able to provide them for years on our website. Whenever our prices are updated at our scales, it’s immediately reflected on our website. So every day when we open we update our prices on our site and if prices change throughout the day, you can be sure to know that they have also been changed on our website. We recently started keeping track of our average scrap prices, including the average price for scrap ballasts. You can check out our website to view the 30-day average so it can help you determine when it’s a good time to bring in your ballasts for recycling. Also, you can view the price history for ballasts over the last 30 days so you can see any fluctuation in the prices and market.
So you have finished reading the how to remove copper from ballast topic article, if you find this article useful, please share it. Thank you very much. See more: ballast recycling, fluorescent ballast recycling near me, how to remove copper from transformer, how to remove copper from stator, home depot ballast recycling, how much copper is in a ballast, pcb ballast, how to remove copper from armature
