Top 42 How To Remove Pool Pump Lid 16869 Votes This Answer

You are looking for information, articles, knowledge about the topic nail salons open on sunday near me how to remove pool pump lid on Google, you do not find the information you need! Here are the best content compiled and compiled by the Chewathai27.com team, along with other related topics such as: how to remove pool pump lid pool pump basket lid, how to open pool pump lid, pool pump lid hard to close, pool pump lid removal tool, how to put pool pump lid on, pentair pool pump lid removal tool, pool skimmer lid stuck, how to remove pool filter lid

Try holding firming to the handles or the plastic parts of the lid, and give the lid a good twist clockwise. If that doesn’t work, try holding on the handle that is on the left with your left hand and with the palm of your right hand, try tapping or thumping the other side of the lid to crack the seal (no break it).

How do you open a pool skimmer lid?

How do you get a stuck lid off a pool filter?

Try holding firming to the handles or the plastic parts of the lid, and give the lid a good twist clockwise. If that doesn’t work, try holding on the handle that is on the left with your left hand and with the palm of your right hand, try tapping or thumping the other side of the lid to crack the seal (no break it).

How do you take apart a skimmer for a pool?

How do you remove a pump basket lid?

Try holding firming to the handles or the plastic parts of the lid, and give the lid a good twist clockwise. If that doesn’t work, try holding on the handle that is on the left with your left hand and with the palm of your right hand, try tapping or thumping the other side of the lid to crack the seal (no break it).

---

Pool Pump Lid Opener

Pool Pump Lid Opener

---

How to Undo a Stuck Pool Pump Lid Without Breaking It

• Article author: www.myperfectpool.com.au
• Reviews from users: 20739 Ratings
• Top rated: 4.3
• Lowest rated: 1
• Summary of article content: Articles about How to Undo a Stuck Pool Pump Lid Without Breaking It Updating …
• Most searched keywords: Whether you are looking for How to Undo a Stuck Pool Pump Lid Without Breaking It Updating Having trouble undoing the pool pump’s strainer lid? We’ll show you how to undo a stuck lid without breaking it.
• Table of Contents:

Your Pool Pump Lid Is Stuck (Here Is How To Undo It Safely)

4 Ways to Open a Stuck Pool Pump Lid

Why Did My Pump Lid Get Stuck

How to Prevent a Pool Pump Lid Getting Stuck

Final Thoughts

Legal Information

Read More

Pool Pump Lid Opener – YouTube

• Article author: www.youtube.com
• Reviews from users: 49434 Ratings
• Top rated: 3.2
• Lowest rated: 1
• Summary of article content: Articles about Pool Pump Lid Opener – YouTube Updating …
• Most searched keywords: Whether you are looking for Pool Pump Lid Opener – YouTube Updating In this video I show you a tool I have used for years that has helped me get off stubborn pool pump lids. Usually if the pool pump lid hasn’t been opened in …pool pump lid, pool lid opener, swimming pool pump lid, pool tool, swimming pool tool, pump lid
• Table of Contents:

Read More

Pool Tips: Pentair Pump – How to Change the Pump Lid #Shorts – YouTube

• Article author: www.youtube.com
• Reviews from users: 33920 Ratings
• Top rated: 4.2
• Lowest rated: 1
• Summary of article content: Articles about Pool Tips: Pentair Pump – How to Change the Pump Lid #Shorts – YouTube Updating …
• Most searched keywords: Whether you are looking for Pool Tips: Pentair Pump – How to Change the Pump Lid #Shorts – YouTube Updating In this short video, we walk you through how to remove or replace the pump lid on a @Pentair pool pump. Make sure to check out the whole video to get some go…Pentair, pumps, pools, pool equipment, parts, variable speed, swimming pools, automation, pump lid, lids, infloor parts, infloor cleaning, epoolsupply, pool pump, pool school, superflo, intelliflo
• Table of Contents:

Read More

How to fit a Hayward Lint pot lid, common Problems and leak seal. non prime helps and where to buy. – YouTube

• Article author: www.youtube.com
• Reviews from users: 15878 Ratings
• Top rated: 3.4
• Lowest rated: 1
• Summary of article content: Articles about How to fit a Hayward Lint pot lid, common Problems and leak seal. non prime helps and where to buy. – YouTube Updating …
• Most searched keywords: Whether you are looking for How to fit a Hayward Lint pot lid, common Problems and leak seal. non prime helps and where to buy. – YouTube Updating To buy Quality Hayward pumps and Filters at great Prices delivered Australia wide contact Nillumbik Pool & Spa Servicehttps://nillumbik-pool-and-spa-service….video, chia sẻ, điện thoại có máy ảnh, điện thoại quay video, miễn phí, tải lên
• Table of Contents:

Read More

How to Open & Close a Pool Skimmer | eHow

• Article author: www.ehow.com
• Reviews from users: 9591 Ratings
• Top rated: 3.3
• Lowest rated: 1
• Summary of article content: Articles about How to Open & Close a Pool Skimmer | eHow Updating …
• Most searched keywords: Whether you are looking for How to Open & Close a Pool Skimmer | eHow Updating A pool skimmer is located next to a pool, above ground or inground. It helps filter out dirt and particles, including leaves, from entering a pool’s water filtration system. This unwanted material collects in the basket in the skimmer and periodically needs to be emptied.
• Table of Contents:

Close a Pool Skimmer

Step 1

Step 2

Step 3

Step 4

Step 5

Open a Pool Skimmer

Step 1

Step 2

Step 3

Step 4

Read More

Stuck Pump Lid – Swimming Pool Help

• Article author: www.poolhelpforum.com
• Reviews from users: 38313 Ratings
• Top rated: 3.7
• Lowest rated: 1
• Summary of article content: Articles about Stuck Pump Lid – Swimming Pool Help HEAT! Get your self a blow dryer or hot water. Either or will work, I d both, Dryer around the l, underneath it. Poured hot water … …
• Most searched keywords: Whether you are looking for Stuck Pump Lid – Swimming Pool Help HEAT! Get your self a blow dryer or hot water. Either or will work, I d both, Dryer around the l, underneath it. Poured hot water …
• Table of Contents:

Read More

Can’t remove pool pump lid | Trouble Free Pool

• Article author: www.troublefreepool.com
• Reviews from users: 3886 Ratings
• Top rated: 4.3
• Lowest rated: 1
• Summary of article content: Articles about Can’t remove pool pump lid | Trouble Free Pool If you have a couple of 2×4’s (roughly 2-3′ each)and some clamps, clamp them snugly on each se of the rges on the l and unscrew the l. …
• Most searched keywords: Whether you are looking for Can’t remove pool pump lid | Trouble Free Pool If you have a couple of 2×4’s (roughly 2-3′ each)and some clamps, clamp them snugly on each se of the rges on the l and unscrew the l. Hi Guys. I was wondering if you can give me any advice on how to remove my pool pump lid. I never had a problem before until I replaced the filters in my…
• Table of Contents:

Read More

Can’t get pump lid open

• Article author: www.poolforum.com
• Reviews from users: 12928 Ratings
• Top rated: 3.6
• Lowest rated: 1
• Summary of article content: Articles about Can’t get pump lid open Your l might not be designed the same as mine in order to accommodate the 2×4. … It might be time to replace the gasket there as well. When … …
• Most searched keywords: Whether you are looking for Can’t get pump lid open Your l might not be designed the same as mine in order to accommodate the 2×4. … It might be time to replace the gasket there as well. When … thread, http://www.poolforum.com/pf2/showthread.php?15551-cleaning-pump-basket, read, open, pump, moved, thing, prettyI’m trying to open up my pump lid to clean out the filter. I thought I read somewhere a way to release pressure but can’t find it. I had my father in law try too and he’s twice my size. Thing is stuck! How often do these things need to be cleaned out? I’ve only had pool for 2 weeks and it looks pretty dirty in there already. Also, there’s some goop I need to put around it every time I open and close it? I know there’s a thread that explains this somewhere, but I couldn’t find it.
• Table of Contents:

Can’t get pump lid open

Re Can’t get pump lid open

Re Can’t get pump lid open

Re Can’t get pump lid open

Re Can’t get pump lid open

Re Can’t get pump lid open

Re Can’t get pump lid open

Re Can’t get pump lid open

Re Can’t get pump lid open

Re Can’t get pump lid open

Read More

How to Remove a Hayward Pool Filter Lid | eHow

• Article author: www.ehow.com
• Reviews from users: 26582 Ratings
• Top rated: 3.3
• Lowest rated: 1
• Summary of article content: Articles about How to Remove a Hayward Pool Filter Lid | eHow For a cartrge filter, simply depress the latches on the top of the filter tank. For DE and sand filters, use a wrench to loosen and remove the bolts securing … …
• Most searched keywords: Whether you are looking for How to Remove a Hayward Pool Filter Lid | eHow For a cartrge filter, simply depress the latches on the top of the filter tank. For DE and sand filters, use a wrench to loosen and remove the bolts securing … Hayward pool products are very popular with consumers for their ease of use and maintenance. Hayward offers three basic types of pool filters, DE (diatomaceous earth), sand and cartridge. All three Hayward filters have similar lids attached to the filter tank where the water is filtered and stored.
• Table of Contents:

Step 1

Step 2

Step 3

Step 4

Step 5

Read More

---

See more articles in the same category here: Top 122 tips update new.

How to Undo a Stuck Pool Pump Lid Without Breaking It

Share this…

Pinterest

Linkedin

Is the strainer lid of your pool pump stuck? Have you tried draining off the pressure and even attempted brutal methods but the little guy is staying put? It must be frustrating, but we have a solution for you.

In this article, we will give you a step-by-step guide on how to undo your tight or stuck pool pump lid without breaking it.

The best and safest way to undo a tight pool pump lid is to use a pool pump lid wrench. Fasten the wrench securely on the pump’s lid, and twist it anti-clockwise. It offers a firm grip making it easier to undo tight lids. Another unsanctioned method is to apply a lubricant around the lid; WD40 spray does magically unfasten tight seams.

There are actually four different ways you could use to loosen your tight pool pump lids. Keep reading to find out what they are and check out our tips to prevent your lid getting stuck again.

pool pump lid

Your Pool Pump Lid Is Stuck? (Here Is How To Undo It Safely)

The lid to a pool pump is also called a strainer lid, and it is essential as it is the secret behind the general performance of the pump when in action.

It acts as the only access point to the inside of the pump. It’s also an important feature to be able to observe if the water is being properly pumped and the pump is in good condition. For the pump to work properly, the lid must provide an airtight seal.

The lid comes second among the parts that pool owners and pool technicians replace on a pool’s pump. That means there’s a lot of pool owner’s struggling to undo their lid.

After cleaning out the strainer basket or any other repair inside the pump, you may overdo things and over tighten the lid. Or the threads may be old and damaged or dirty. Which means the next time you want to access the inner parts of the pump, you find that the lid won’t budge.

The mistake many people make trying to open a stuck pump lid is to brutally force the lid open, which might break it.

4 Ways to Open a Stuck Pool Pump Lid

You should first try opening it like you normally would before you engage more forceful methods. Your goal is to avoid damaging the lid, or damaging the connected pipes.

There are four ways of opening a strainer lid;

1. The normal way

2. Use a pool strainer lid wrench

3. Spray WD40 on the seams

4. Use a rubber mallet

The Normal Way

Pool pump lids vary in design. Sometimes you’ll find two handles on either side of the lid. And other times there is indents or protruding plastic on the lid that is meant for holding with both hands when you are opening or closing the pump.

Before you start, you want to make sure you’re turning it the correct way to loosen it. On the top surface of the lid, there are often four curved arrows indicating which direction the lid is supposed to be rotated when opening. Usually, it’s pointing anti-clockwise.

You’ve likely already tried this but give it one more go before moving on. Try holding firming to the handles or the plastic parts of the lid, and give the lid a good twist clockwise.

If that doesn’t work, try holding on the handle that is on the left with your left hand and with the palm of your right hand, try tapping or thumping the other side of the lid to crack the seal (no break it).

If it moves, keep tapping as the lid softly comes off until the threads on the lid are fully unsealed.

The Pool Strainer Lid Wrench

The next thing you should try is a pool pump lid wrench. A pool pump lid wrench is a lid opener that is fastened on the pump’s lid to provide extra grip and leverage to open the lid. It’s very safe to use and will often open a tight lid.

You’ll also find that there are wrenches suitable for all lids and there are lid removal wrenches that suit certain brands of pumps.

Here’s some common pool pump wrenches:

Multipurpose Lid Removal Tool / Wrench

This tool is a multipurpose tool to remove lids of all kinds. It’s great for undoing stuck pool pump lids and also for undoing car oil filters, pipe connections, jars and many other things.

Simply fit it around the lid. The yellow loop tightens around the light providing grip whilst the handle will give you the extra leverage you need to undo that stuck lid.

Boeray Multi-Purpose Lid Removal Tool (works for stuck pool pump lids)

Click here to check price >>

Hayward Pump Lid Removal Tool

This tool here is suitable for undoing the lids on several Hayward Super series pumps such as:

SP3007 SP3010 SP3015 SP3020 SP3025 SP3030 SP3005X7 SP3007X10 SP3010X15 SP3015X20 SP3020X25 SP3025X30

Hayward SP3100T Pump Lid Removal Tool

Click here to check price >>

Sta-Rite Lid Removal Tool

These filter lids are notoriously difficult to undo. Using this tool will make your life much easier. For an extra tight lid, you can also gently tap the handle with a mallet to loosen the lid.

Lid Removal Tool

Click here to check price >>

Every pool owner who values cleaning the strainer basket should have a pool pump lid wrench in their store in anticipation of such situations.

Spraying WD40 On The Seams/grooves

On pool pump strainer lids, the magic is with the WD40 spray.

The spray is sprayed around the joint where the lid comes into contact with the pump.

It’s best to apply the lubricant beforehand and allow it to penetrate for a few hours. During this time, the spray will lubricate the seams, traveling up the seams or the threads and making them slippery.

After you’ve waited a few hours, give this a go. And if it doesn’t work, try combining this with a lid opening wrench or a rubber mallet.

WD-40 Spray

WD-40

Click here to check price >>

Aside from the strainer lid wrench, this is the best and most restraining method ever; the only downside is the window period.

Use Of A Rubber Mallet

If again the lid is still proving too tight to open, it’s time to try with more force. This should be a last result as you may break the lid or something else doing this.

Arm yourself with a mallet, preferably one made of rubber. The lid to the pump is plastic and fragile; a metal tool will definitely maim it or break the knobs altogether.

The mallet is an extra force so hit one of the knobs on the inner backside while being mindful of the directions on top of the lid.

The pipes will vibrate because of the impact of the force on the pump. Try not to use excessive force as you may damage the pipes.

Alternative hitting between the left handle and the right handle.

Why Did My Pump Lid Get Stuck

Some pump lids are known for being difficult to open. My top tip for these type of lids is to invest in a pool pump lid opening wrench. That way you don’t need to struggle every time you try to clean out the strainer basket.

Some other pump lids usually open OK but can get stuck. Reasons your pool pump lid is tight or stuck include:

Overtightened lid

Dirty threads

Cross-threaded lid

Old rubber seal

Sealant used when doing up the lid (you shouldn’t need sealant)

How to Prevent a Pool Pump Lid Getting Stuck

For other pumps that aren’t prone to always getting stuck, there are a few things you can do to make your pump lids easy to open:

Do not overtighten the lid. Tighten it until you can’t go any further using gentle force then give it one last ¼” turn.

Clean the threads. With the lid off, use a toothbrush to clean the threads on the lid and the pump body. Make sure there is no dirt or debris stuck.

Careful not to cross-thread the lid. Cross threading is when you haven’t aligned the threads properly when you do the lid up. When tightening the lid, you shouldn’t need excessive force, if you do, you may have cross-threaded the lid. Undo it and start again.

Renew the rubber seal.

Use a teflon seal lubricant like this.

TacParts Magic LUBE Teflon Lubricant

Final Thoughts

As discussed earlier, the mistake many people make is to brutally force the lid open, which might break it and replace it. You should first try opening it like in typical situations as you gradually seek to engage more forceful methods.

Once in a while, technical problems occur with the lid where the lid is stuck and no ordinary method is working. It is okay, and it is normal. But while at it, you might want to be careful enough not to hit the knobs to the point of breaking them and rendering the pumping unit disabled.

Swimming Pool Help

Postby John L » Thu 04 Jun, 2020 16:04

I know this post is old, but felt it was important to share my solution to release a stuck pool pump lid. I own a Hayward Powerflo Matrix pump that was stuck. I could not release it to remove all the debris in the basket, which made my return pressure weak. So after reading many, many posts on solutions, here’s the simplest thing you can do. HEAT! Get your self a blow dryer or hot water. Either or will work, I did both, Dryer around the lid, underneath it. Poured hot water over the lid getting it into the grooves. With a rubber mallet, tap around the lid in the direction to open it, counterclockwise. If that doesn’t work. We need to release the pressure inside the pump by unfastening the skimmer hose and letting the water within the pump drain out. But before you do this, please add stopper plugs in the skimmer and return jet, this will prevent water everywhere. Now the lid should be able to turn and come off. Remember heat expands plastic, this will help. Hope this works, it did for me. Don’t forget to clean out the basket and prime it, by adding water to the pump basket area. Add lubricant to the grooves of the lid and close. Hope this works.

Can’t remove pool pump lid

Melt In The Sun said: proginov said: I took a 1×4 and cut a groove in it. Keep it behind the filter so it is always handy. Click to expand… That’s a really slick idea! Thanks for posting it. That’s a really slick idea! Thanks for posting it. Click to expand…

That is a great idea! I’m going to have to try that! I have the same kind of pump lid. The first time I took it off, I thought I was going to break it and it would never come off. I think I used some kind of long handled adjustable wrench, like channel locks, pipe wrench or something like that to get it off. I remember use a rag on the lid handle to try and keep the jaws from damaging it.I wouldn’t sweat the silicone pool lube, you should use it to help keep o-ring lubed and help seal the lid against possible leaks. Btw you don’t have wrench it back on with tons of force, you just need it tight enough to seat so air and water don’t leak in/out. Make sure the o-ring is in good shape, lube it and ensure the channels the o-ring sits in are clean. In my case the o-ring was worn and the last person to touch it didn’t lubed it (or so it seemed). So he just wrenched on with a loads of force so it wouldn’t leak.

So you have finished reading the how to remove pool pump lid topic article, if you find this article useful, please share it. Thank you very much. See more: pool pump basket lid, how to open pool pump lid, pool pump lid hard to close, pool pump lid removal tool, how to put pool pump lid on, pentair pool pump lid removal tool, pool skimmer lid stuck, how to remove pool filter lid