Compton Garage Door Springs? The 78 New Answer

Garage door springs carry a lot of tension as they are responsible for relieving the load on the door. As the heavy door lowers to the ground through gravity, it also pushes on huge load-bearing springs that create tension. The tension in these garage door springs makes it a lot easier for your operator to raise the door back up when the time comes.

Even if you don’t see or hear a spring break, if your door won’t lift with the opener or even by hand, you’ll know it’s broken. With the lack of force provided by the springs, it weighs about twice as much. You can definitely replace garage door springs yourself, but it can be a bit tricky and dangerous, and the skill required depends a lot on the type of springs you have. If the process doesn’t look like something you’d like to adopt, don’t hesitate to get in touch and we can get the new springs fitted in no time.

Identifying the type of springs on your garage door

There are different types of springs on different garage doors and there is a big difference in how easy these springs are to replace. There are tension springs and torsion springs. You can easily tell what type of springs you have by looking at your garage door. If you have a gate system with long springs that run parallel to the rails on either side of the gate, they are extension springs. They are long and thin, in the air. Torsion springs are thicker springs that sit on a metal bar near the door opening.

If you have a really old door, a single piece that swings in the air, then you may have vertical springs on either side of the door. These are side springs that usually complement additional extension springs in the air.

Now both extension and torsion springs work in a similar way. You use the weight and gravity of the door to tense and strain as the door closes, giving you a reserve of energy to move the door back up when you open it. The difference is that extension springs stretch to be loaded so the energy is stored outwards and wants to get back to the center, while torsion springs are twisted as the door lowers and they release energy by moving in turn back the other direction.

How to replace torsion springs

Torsion springs, as you might guess from the name, are considered to be the more dangerous model to work with. While it’s possible to work with torsion springs, it can be really dangerous if you don’t know what you’re doing and don’t follow the process closely. Those torsion springs store a lot of energy, and you want that to be bottled up and not deflect in your general direction. You are under tension and you need to remember that with every step. We definitely recommend that you call a professional unless you’re 100% comfortable – it’s just safer and easier that way.

If you are replacing torsion springs, you will need a winding bar that allows you to easily twist and untwist the springs to adjust the amount of torsion. There is a winding cone at the end of each torsion spring. Here the winding rod fits and can twist the whole spring. You need to rotate the bar slowly while pushing the spring against the door to slowly release it.

When replacing torsion springs, you must have the door closed. There are usually only two torsion springs on a door, and if one spring is completely broken, half is done! Once the springs are unwound and removed from the door, all that remains is to wind up the new springs and attach them to the door. For more instructions, it’s much easier to look up a video tutorial that shows how to precisely screw and unscrew the springs on the door.

How to replace tension springs

Tension springs are generally considered to be much easier to replace. You can completely remove and replace the springs on your door without dealing with dangerous tension. Once you open the door the springs lose most of their tension and should be safe to handle. When you open the door and start work, be sure to secure it with clamps so it doesn’t slide down on you. Simply disconnect the springs from the brackets, pulley and cable and install the new spring by attaching it to the pulley and safety cable. That’s it!

Should I replace the springs myself or not?

It depends on how confident you feel whether you are looking for a project or not and what kind of springs you have on your door. If you’re fairly proficient with DIY stuff, you’ve got a full day to take your time and you’ve got tension springs – you’re in luck! You may be able to handle things on your own. But for many of us, replacing our own springs on a garage door just isn’t a problem.

There’s always a chance you won’t get everything in place and the door won’t be usable. Also, if the springs are not properly installed, over time this can pose a safety hazard to using your garage door. It can cause stress on the door, leading to breakage or significantly reducing the life of the opener. Either way, repairing your own springs is a great way to save a few bucks, but make sure you really know what you’re doing, otherwise it could be a great way to spend a few extra bucks to fix everything repair.

If you’re not quite sure, give us a call at (813) 885-3667! We will be happy to help you to have your springs repaired in the shortest possible time so that your gate is functional again.

“Should I replace both garage door springs?”

Yes. You might be tempted to save money on parts and labor by only replacing one spring, but you’ll probably have to replace both if one spring breaks.

Garage doors have two springs, one on each side of the door. The springs exert the force that makes the door easy enough to lift. When a garage door spring breaks, many homeowners wonder if they need to replace both springs or if they can just replace the failed spring. Read below why you should always replace both garage door springs when one breaks.

Why is a balanced garage door important?

Springs keep your garage door balanced and ensure both sides of the door move up and down at the same time. If a spring breaks, this will affect the function of the door. The two sides rise and fall at different speeds.

You will hear more noise when you use the garage door and the other spring will wear out faster with the heavier workload trying to compensate for the problems on the other side of the door.

The average life expectancy of a garage door spring is around 10,000 open and close cycles. For most workshops that means around seven to nine years, but some springs break within four or five years with frequent use.

How can you tell if your garage door is unbalanced? Not only can you hear more noise, but you can look for several telltale signs. A sloping or crooked door is a sign of imbalance, as is a garage door that slams shut when you close it instead of slowly coming down. If you notice increasing gaps between the coils in your springs, take this as an indication that the springs are failing and may need to be replaced.

What is the danger of an unbalanced garage door?

When a spring breaks, several things can happen:

The door can suddenly close.

Loose springs can break or fall out of the brackets.

The gate can speed up or slow down, become unpredictable and put you and your family at risk when trying to enter or exit the garage.

A defective spring can cause the chains to warp due to wear on the wheels. The motor can also be subjected to greater stress when the garage door is pushed open and must therefore be replaced earlier.

An unbalanced garage door can also cause injury or damage to your property. If your garage door falls on your car, you may need to take it to the shop for repairs. It could also fall on something standing near your garage door entrance, e.g. B. a bicycle or a scooter.

Learn more about our garage door spring repair service

Should I replace both garage door springs?

If you’re thinking of replacing a garage door spring, it’s probably better to replace both. Your garage door will work better if you get two new springs to make up for the wear and tear and you will have the peace of mind of protecting your family from the consequences of a broken spring.

Can a garage door be spring operated?

no Both springs must work together to pull the garage door up and gently bring it down. When operations rely on a spring, not only can it create safety concerns, it can also cause wear and tear on the door.

You should not attempt to balance a garage door yourself. Although replacing both springs is vital to getting your door working again, only a professional can make the repairs needed. Garage door repair technicians know how to perform door balance tests.

Garage doors are heavy, often weighing hundreds of pounds, and you don’t want to put yourself in danger. It is safest to get help replacing both springs.

Why do garage door springs break?

The most common reason for spring breakage in garage doors is wear and tear. Nothing lasts forever, and having your garage door go up and down at least twice a day is putting a lot of tension on the spring. You can buy extended life torsion springs to get more use out of your garage springs, but you will still need to replace them at some point.

Another contributing factor to broken garage door springs is rust. It shortens the life of a spring and introduces more friction as the coils move. You can apply a silicone-based lubricant to your feathers each season to reduce rusting.

Poor maintenance can also cause springs to break. You should check the garage door balance sheet every year to catch any potential problems early. Use the emergency release cord to put the door in manual mode, then lift and release the door. Well-maintained springs keep the door in place.

What kind of garage spring do I need?

In order to properly replace the spring, you need to know what type you have. The two main types of springs are extension and torsion.

Torsion springs are the long, thin springs along the horizontal track of the gate that expand as you move the gate. They include three types of feathers:

Open loop tension springs

Double coiled tension springs

Extension springs with clipped ends

Torsion springs sit on the metal shaft above the door opening. They are wound to a specific twist that helps with assembly. The four types are:

Torsion springs set early.

Standard torsion springs.

Torque-Master torsion springs.

Torsion springs for steel roller doors.

Is it dangerous to replace a garage door spring?

Yes, it can be dangerous for a homeowner to replace a broken garage door spring. Garage doors are heavy and their components are under a lot of pressure. It is best to leave the work to a professional. The dangers of attempting a repair or replacement on your own include:

Springs will kick back when you try to replace them: The tension in the springs can cause quite a stab or even serious injury.

The tension in the springs can cause quite a stab or even serious injury. The door falls on you while you work: A broken spring can cause a garage door to suddenly close, injuring you or damaging objects in the door’s path.

A broken spring can snap a garage door shut, injuring you or damaging objects in the door’s path. Guessing the wrong spring tension: If you guess wrong, the garage door may fall down during later use.

plan maintenance

What do I need to replace a cracked garage door spring?

To replace a tension spring, you need the replacement part and C-clamps. Open the garage door and secure it with the clamps. Remove the spring from the rail mount and pulley and remove one end of the safety cable. Install the new spring along with the idler pulley and reconnect the safety cable.

Torsion springs are more difficult to manage. Close the door and relax both springs. Detach them from the center bar mount and unhook the cables from the pulleys. Slide the loosened pulleys off the bar. Install the new springs, then reinstall the pulleys and cables. Wind up both springs with a wind-up bar and test the door balance.

Now you understand why a balanced garage door is so important. It protects you and your family. Repairing or replacing your springs yourself can create safety issues, and the job can be challenging if you’re not familiar with all the moving parts. It’s best to leave repairs and replacements to the professionals, especially if you live in Tualatin, Wilsonville, Tigard, Portland, Happy Valley, Canby or other areas of Portland where we regularly provide expert garage door services.

If you need help replacing your garage door springs, call Oregon City Garage Door at 503-632-3070 or contact us online to schedule a service appointment. We can get the job done quickly and correctly the first time.

Call us today!

3 reasons why garage torsion spring length matters

If you come across a broken garage door opener or find that the wires on a garage door seem to be worn out for their age, the problem may not be a mechanical problem. Instead, there could be an issue with the springs used in the door.

Incorrectly dimensioned torsion springs can lead to safety problems. The garage door is not working as it should and this could cause it to malfunction and possibly put users at risk. Here are three reasons garage door torsion springs are important and why you should make sure they fit properly.

1. Springs that are too large can damage the garage door opener

When garage door springs are too big, they provide more force than the door needs. It opens with too much force, rolls up very quickly and endangers his safety. Children or even unprepared adults could be knocked over by the sudden force trying to open it. The door also bounces up and down after opening, which is another safety issue.

2. Springs that are too small can make the opener less effective

If the spring for the door is small, it can make the door too heavy. If someone tries to lift the door, it will fall back instead of continuing to rise. A user who is unaware of the garage door problem could be injured by the door slamming shut. Children could also become entangled when trying to push the door up and walk under it.

3. Right garage door torsion spring specifications protect the door

Replacing an oversized or undersized torsion spring with the correct size will balance the door and make it safe again. The door lifts with less effort and stays securely in place. The garage door opener may also need to be replaced if it has been damaged by springs that are too large or too small.

Note that only a trained garage door technician should attempt to replace garage torsion springs. Attempting this operation alone could result in serious injury.

How do I know what torsion spring size I need?

This is a question we often hear from our customers, and luckily it’s easy to find an answer to. You can use a correct existing spring to determine torsion spring size in four easy steps:

Find out which way spring is blowing, right or left. If it rotates counterclockwise, it winds to the left, and if it rotates clockwise, it winds to the right. Measure either 10 or 20 turns and find the correct length according to that number in our chart. Measure the inside diameter of the spring. Measure the total length of the spring.

This will help you determine the correct torsion spring size and order a replacement. Have all three dimensions and wind direction ready when ordering your torsion springs. Or to make the process even easier, you can use our handy IDC spring calculator app!

If the existing spring is the wrong size and you need further assistance, IDC Spring can help. We have the right size torsion springs for all types of garage doors. Trusted by the top manufacturers in the industry, we can help you find the right solution for your project. Contact us to learn more about our products or to request a quote.

Understand the garage door spring color code and make sure you select the correct size

If you own a garage door, you probably know that springs are an important part of the door mechanism. Even doors that are manually opened and closed use springs. Because garage doors typically weigh hundreds of pounds, opening them without the aid of springs would be a practical impossibility for most people and would also be beyond the capabilities of the automatic garage door opener. So how do you do it? By “charging” when the door closes, then releasing the stored energy to raise the door when you want to open it.

Everything you want to know about garage door springs in Northglenn and Broomfield

Before we get into the color coding of garage door springs, let’s take a closer look at the springs themselves. There are 2 types of springs used for garage doors. torsion springs and tension springs. Here’s the difference:

Torsion springs store energy by curling up tightly when the door closes. When the door is closed and at rest, the torsion spring stores tremendous amounts of energy, and when you want the door to open, the spring helps by unwinding and releasing that energy. Torsion springs sit on the wall above the garage door. You should never attempt to install or repair a torsion spring yourself as people have died trying. Instead you should call the best garage door service in Broomfield and Northglenn: A Better Garage Door.

Conserve energy by curling up tight as the door closes. When the door is closed and at rest, the torsion spring stores tremendous amounts of energy, and when you want the door to open, the spring helps by unwinding and releasing that energy. Torsion springs sit on the wall above the garage door. You should never attempt to install or repair a torsion spring yourself as people have died trying. Instead you should call the best garage door service in Broomfield and Northglenn: A Better Garage Door. Tension springs run parallel to the rails of the door and are typically located between the rails and the garage ceiling. Extension springs store energy by expanding when the door closes and then releasing the stored energy when the door opens. When mainsprings snap, they can fly off in all directions, and woe betide you if you get in the way.

About the Spring Color Coding System: Tension Springs

Now that we know a little more about garage door springs found in Parker homes, let’s take a look at the often confusing color code that comes with them. For extension springs, the color coding system is designed to help the company performing your garage door service determine the lifting capacity of the springs. This is important as different garage doors weigh different amounts and you will need springs with the appropriate lifting capacity for your particular door. The correlations between color and buoyancy are as follows:

Tan = 100 pounds

White = 110 pounds

Green = 120 pounds

Yellow = 130 pounds

Blue = 140 pounds

Red = 150 pounds

Brown = 160 pounds

Orange = 170 pounds

gold = 180 pounds

Light blue = 190 pounds

At this point, the color sequence repeats itself so that 200 is denoted by tan, 210 is denoted by white, 220 is denoted by green, and so on. Garage door springs, which you get in the big box, are often made from cheap, low-quality foreign steel and tend to break before their time. To make sure you’re getting the best springs available, speak to the professionals at A Better Garage Door.

About the spring color coding system: torsion springs

For torsion springs, the color coding works a little differently. The color code on a torsion spring indicates whether it is a “right wind” or “left wind” spring, with black for right wind and red for left wind. Additionally, the torsion spring is color-coded so technicians can determine the thickness or gauge of the wire. This allows the technician repairing or replacing the spring to quickly determine the gauge without having to measure it. (The number of different gauges is too extensive to list here.) Torsion springs also have a straight line running across the spring that helps technicians determine the condition of the spring. This line will distort geometrically as the spring “charges”. This geometric distortion can be read by the technician and can help determine how tight the spring is stretched at any given time.

The final word on color coding

The purpose of the color coding system, then, is to assist in properly identifying the spring for repair or replacement purposes. It doesn’t affect how you experience the garage door, and it’s not an important message you need to know about. The purpose is purely technical and is to help the company doing your garage door service in Northglenn when it comes time to do their job. Developed by the Door and Access Systems Manufacturers Association (DASMA), the system serves an important purpose, despite its cryptic nature.

How to determine which garage door springs you need

The springs are the unsung heroes of your overhead garage door. You do the heavy lifting, while the “opener” essentially acts as a regulator – it gets the door going and then makes sure the up or down movement is nice and smooth. Garage door springs are incredibly strong and durable, but even the toughest will wear out and need replacing after years of regular use. If you need garage door springs in Northglenn, or need to replace one or more springs, your best bet is to call A Better Garage Door. However, if you want to buy the new spring yourself and then call us to have it installed, that’s fine too. Below we provide some pointers to help you choose the right spring or springs.

Choosing the right garage door springs for homes in Broomfield or Commerce City

Garage doors use one of two different types of springs, and buying the right one for your door is crucial. Luckily, determining what type of spring your door uses is easy. If the springs are attached to the wall just above the door, you have torsion springs. Some doors use one such spring, while most newer doors use two. If the springs are above the rails and run away from the gate towards the opener, you have extension springs. Now let’s look at how to choose the right torsion or extension spring.

Torsion Spring Winding Direction – Before you can order the correct torsion spring, you need to know how it is wound. Look at the springs from the garage. On most new garage doors, there are two torsion springs separated by a divider located in the center of the door. The spring on your right is a “left-hand spring” and the spring on your left is a “right-hand spring.” So if the spring on your left is broken, you will want to order a “right-hand spring.” If you get the wrong nib, you just can’t use it. So make sure you do this correctly.

– Before you can order the right torsion spring, you need to know how it is wound. Look at the springs from the garage. On most new garage doors, there are two torsion springs separated by a divider located in the center of the door. The spring on your right is a “left-hand spring” and the spring on your left is a “right-hand spring.” So if the spring on your left is broken, you will want to order a “right-hand spring.” If you get the wrong nib, you just can’t use it. So make sure you do this correctly. Torsion Spring Wire Size – Determining wire size is also a straightforward process. Just measure how far there is between 10 turns of the spring to within 1/16 of an inch. There are a number of wire size charts on the internet that you can use to find the actual wire size based on your measurement. If the spring is broken you should still be able to find 10 turns that are properly spaced and give an accurate measurement.

– Determining wire size is also a straightforward process. Just measure how far there is between 10 turns of the spring to within 1/16 of an inch. There are a number of wire size charts on the internet that you can use to find the actual wire size based on your measurement. If the spring is broken you should still be able to find 10 turns that are properly spaced and give an accurate measurement. Torsion Spring Inner Diameter and Overall Length – In many cases, the inner diameter of the torsion spring is marked on the stationary cone between the two springs in the middle of the door. “1.75” means the inside diameter is 1 ¾ inch. “2” means the inside diameter is two inches, etc. If you can’t find the sizing, simply measure the inside diameter yourself. To determine the overall length, simply break out the tape measure and measure from the beginning of the spring to the End. If the spring is broken, simply measure its companion spring, which is the same length.

– In many cases the inner diameter of the torsion spring is marked on the stationary cone between the two springs in the middle of the door. “1.75” means the inside diameter is 1 ¾ inch. “2” means the inside diameter is two inches, etc. If you can’t find the sizing, simply measure the inside diameter yourself. To determine the overall length, simply break out the tape measure and measure from the beginning of the spring to the End. If the spring is broken, simply measure its companion spring, which is the same length. Choosing the Right Extension Spring – While measuring torsion springs to make sure you’re getting the right one is fairly easy, finding the right extension spring is even easier. That’s because garage door extension springs have a colored stripe that indicates their size. All you have to do is find this color indicator and forward the color found (red, yellow, blue, orange, etc.) to the mainspring supplier. This will tell them what they need to know. In some cases, the supplier may want to know the dimensions of the door itself, as well as the material from which it is made. This will help them determine the likely weight. So while you’re in the garage looking for the color indicator on the spring, measure the door itself from side to side and bottom to top.

Call garage door service in the Reunion or Broomfield area

There is nothing wrong with selecting and buying garage door springs yourself. But when it comes to actually installing them, you should always call A Better Garage Door service in the Reunion or Broomfield area by default. This is because the garage door springs are the most dangerous part of your garage’s entire overhead door mechanism. Because they do the actual heavy lifting, they have to store vast amounts of energy. If you are working on any of these sources and accidentally trigger a release of this energy, you could be seriously injured or even killed. Don’t take the risk. Leave the handling and installation of garage door springs to those trained to work with and around them.

Call A Better Garage Door for the highest quality garage door installation and repair services in the Broomfield, Northglenn area. We offer a full range of garage door services, including 24/7 emergency service, so give us a call. We are available when you need us.

When we refer to a garage door spring, we are talking about a torsion spring or extension spring that is responsible for actually raising and closing your garage door. A garage door spring break is one of the main causes of a broken garage door and it should be easy to spot.

Fix my garage door

The best way to prevent your garage door springs from breaking is to have regular inspection and maintenance throughout the expected life of the torsion springs, and replacing them when they near the end of their life cycle. It is much better to replace your springs with new ones a few weeks early than to have them break when they finally give out, which can damage the door and cause a dangerous situation.

Not sure how long you want your garage door springs to last, or maybe it’s time for a replacement? We’ve put together a handy guide to garage door spring life expectancy below, but a general rule of thumb is 10,000 cycles or 3-5 years. This will depend on the quality of your garage door springs and other factors, but should help you determine if it’s time to replace your garage door springs or not.

Why garage door springs break:

Age

The most common reason for a broken garage door spring is simply that it’s worn out. The life expectancy of a garage door spring is not unlimited and sooner or later, like any part, it will simply fail. How long do garage springs typically last? The average garage door spring should last about 10,000 open and close cycles when properly installed.

If you only come in and out of your garage once a day, you can expect a broken garage door spring about 14 years after you first installed the spring. If you’re in and out twice a day, you’ve shrunk to 7 years. If you have children who use the garage door as an alternate entry, a spouse who runs errands several times a day going in and out of the garage every time, or regularly bring storage items in and out of the garage, that number goes down quickly.

One way to prevent your garage door spring from breaking prematurely is to purchase extended life torsion springs. They are more expansive but can last about four times as long.

rust

Of course, there are other reasons why your garage door springs may break prematurely. A big one is rust. Rust is disastrous for torsion springs, increasing friction on the hairspring and corroding the spring itself. Inspecting the springs each season and spraying them with WD-40 can keep them lubricated, healthy, and rust-free.

Too much pressure on the spring

Some garage doors may only have one long torsion spring instead of one on each side. We recommend the dual spring model as individual torsion springs have a shorter lifespan and when they fail there is no other spring intact to reduce the impact.

Get an estimate

For quality inspection, maintenance and replacement of garage door springs in the Tampa area, contact Banko Overhead Doors today.

Have you caught yourself asking, “Can I open my garage door if the spring is broken?” Good! Well, not well, because it’s probably not a pre-emptive question. Well, if one or more springs on your garage door are broken, you should avoid opening the door. It is usually possible to open the door manually, but do not use the automatic opener. In this post we will talk more about why it is not a good idea to open the garage door when a spring is broken and what you should do instead.

Get help replacing garage door springs in Dallas-Fort Worth

If there is someone nearby who can help you, you can try opening the garage door with a partner. But if you are alone and can be patient, contact us online or call us at 817-500-5988 to arrange an emergency service visit.

What happens when a garage door spring breaks?

Opening a garage door with a broken spring is dangerous. Garage doors are heavy. All automatic garage door openers have some type of spring system that acts as a counterbalance to the weight of the door. The springs provide extra support for the cables and trolley when the strike is working to open and close the door. The strike is not designed to support the weight of the door, the springs do. If the springs are damaged or broken, operating the door is risky.

Even if the gate opens and closes, every time the gate is operated, there is a possibility that it will fall despite safety sensors. You don’t want yourself, another person, a pet, or a vehicle to be under the door if it falls.

Operating the automatic opener can also damage other parts of the gate system, it can cause:

Broken or burnt gears

Broken chains or straps

Bend the rails

Can I open my garage door if the spring is broken?

The definitive answer? Yes. Is it recommended? no Do not try to open the door, especially with the automatic opener.

How do I know the spring is really broken?

There are a few ways to tell if your garage door springs are broken.

You see a break in the spring. You heard a loud cracking noise from the garage. The garage door cannot be opened

The first is obvious, you can see a visible break in the spring. There are two main types of garage door springs, torsion springs and extension springs. Torsion springs are located above the garage door opening and tension springs are located near the rails on either side of the door. If you don’t see either of these, you probably have a Wayne Dalton TorqueMaster system, it’s still a torsion spring but it’s hidden in a metal tube above the door opening.

The closest way to tell you probably have a broken spring is if you heard a loud crack like a firecracker. That’s the sound of spring breaking. If you hear the interrupt and can enter the garage through an interior door, you can go inside to confirm the interrupt. The spring can break during operation, but this is not always the case.

The last way to tell if the spring is broken is if the door won’t open. You can hear the door opener motor working and you may see movement, but the door is unlikely to open without the assistance of the spring(s).

Can my garage door springs be repaired?

no Garage door springs cannot be repaired. Springs wear out the first time they are used and can therefore never return to their original state, especially after a break.

If your springs are broken they will need to be replaced and if the door system has multiple springs it is best to replace them all even if only one is broken.

LEARN MORE: Can I just replace a garage door spring?

How to open a garage door with a broken spring

Manually raising the door is not recommended, but is possible. If you decide to open the gate manually, be extremely careful. Garage doors are heavy and feel heavier without working springs. If possible, have another person help lift the door. We do not recommend opening the door alone unless absolutely necessary.

First, unplug the garage door opener and pull the emergency release cord (ERC). Lift the garage door straight up from the bottom center of the door. You’re out of springs to support yourself, you need to secure the gate with something. This is where a partner comes in. Have your partner attach clamps to each rail under the door, the clamps should prevent the door from falling. You can also try putting ladders or 4x4s under the door.

Always be aware of your surroundings, watch your fingers, and make sure children, pets, and anyone not helping are out of the garage.

Do you have to open the door from the outside?

To unlock the garage door, you must detach the door from the cart by pulling the emergency release cord inside the garage. The easiest option is to get in through a front door, if you are locked out of the house this can be a problem. Check the closed garage door, some garage doors have an emergency release button at the top center of the door. You can release the unlocking with a key.

If you cannot access the garage through the gate or emergency release, try a window or contact a professional immediately.

Contact a professional for help replacing your springs

Arrange an inspection or replacement service with a trusted garage door company.

Turn to our team at Doorvana for service from the friendliest garage door professionals in Texas. We build, service and install garage doors in the Dallas-Fort Worth area. We invite you to learn more about our company, services and products by exploring our website. When you’re ready to talk shop, give us a call at 817-500-5988 or send us a message.

Your garage door springs do pretty much all the hard work when it comes to opening and closing your door. Breaking garage door springs is a confusing problem for many homeowners who don’t know exactly how garage door springs work, how to fix them, or why they break – all of which is valuable knowledge before you’re late for work because you can’t get your car out of the garage.

First, what kind of pen do I have and why are they important?

Tension spring systems are mounted on both sides of the garage door rail. They stretch and contract using cables and pulleys as the gate moves.

Systems mount on either side of the garage door track. They stretch and contract using cables and pulleys as the gate moves. Torsion spring systems typically use one or two (depending on door size) tightly coiled springs. The springs sit horizontally on a steel shaft and have cable drums at both ends. The torsion spring is mounted on the end wall above the garage door. Most commonly, it has a three-pronged support system with a middle and two end bearing plates at each end.

Systems typically use one or two (depending on door size) tightly coiled springs. The springs sit horizontally on a steel shaft and have cable drums at both ends. The torsion spring is mounted on the end wall above the garage door. Most commonly, it has a three-pronged support system with a middle and two end bearing plates at each end. Regardless of the type, your garage springs are responsible for helping the door raise and lower. When the garage door is lowered, the springs gain tension. When the garage door is raised, the tension is released and the spring assists in lifting. It is important to note that your garage door springs have the most tension when the garage door is in the closed position. As a result, most garage door springs break when the door is down. In the occasional event that the spring breaks while the door is in the open position, the door may collapse. Therefore, it is important never to go under a service door.

The top reasons why garage door springs break

wear and tear

By far the most common reason for garage door spring failure is simple wear and tear. Most springs are rated and rated for about 10,000 cycles – one cycle consists of the garage door raising and then lowering to close. That might seem like a lot, but consider that you’re going through at least two cycles a day just to get the car out of the garage and back into the garage. When you’re running errands, a spouse is walking to work through the same garage, or kids are opening and closing the door for whatever reason, these daily cycles can add up much faster than you might think. If your garage door has become your “front door” and is being subjected to undue stress, it may be wise to consider extended life torsion springs rated for 20,000 or more cycles.

rust

If for any reason rust develops on the spring, its life will be dramatically reduced. Rust increases friction on the spools as they move back and forth. In addition, corrosion on the spring itself weakens the coils and leads to faster failure. Spraying the spring with a silicone based lubricant three or four times a year can go a long way in keeping it well lubricated and extending its life expectancy.

Improper maintenance

All garage door springs will eventually fail, but proper maintenance can not only prolong the life of the springs but also alert you when they are about to fail. This can help avoid potentially destructive spring blasting as well as headaches associated with attaching as quickly as possible. In addition to lubricating the spring with white lithium grease a few times a year, check the garage door balance at least once a season, especially during the winter when most springs fail. To check the balance:

Pull the emergency release cord (it has a red handle) to put the gate into manual mode.

Lift the door halfway and let go. Springs in good condition should keep it completely still; If the door sags a little and falls off, the springs are starting to show signs of wear and may need adjustment or replacement.

We strongly recommend having repairs to broken garage door springs performed by professional technicians who have the proper training and tools to ensure job safety.

5 (1)

Springs play a very important role in the opening and closing mechanism of a garage door. While the garage door opener is responsible for initiating and controlling a garage door’s movements, it is the springs that open and close the door.

Springs are used to overcome the weight of the garage door as it moves. How long do garage door springs last? Springs have a lifespan of around 7-8 years depending on how often you open the door, so you can expect the springs to wear out. The good news is that you can replace them.

You have two options, either call a professional or buy new springs. Should you choose the latter option, you may be wondering, “How do I know which garage door spring to buy?”. Read on to learn everything you need to know about choosing a garage door spring. This garage door spring selector guide has all the details you need to make the right choice.

Types of garage door springs

Before we discuss how to know which garage door spring to buy, it’s better to understand the types. There are two types of garage door springs: torsion and extension.

torsion springs

Torsion springs are sturdy coil springs mounted on a metal rod. This metal bar is parallel to the garage door. Due to their tight winding, torsion springs store a lot of energy that is generated when the garage door moves and is transferred to the springs. Torsion springs make opening and closing the garage door easier. When the door opens, the springs unfurl and release energy that opens the garage door. There are two types of torsion springs:

Default. This type is usually mounted on the garage door. It is cheaper and mainly used for garage doors in residential buildings.

torque master. Because these springs stay in place, they are considered the safest.

tension springs

Unlike torsion springs, which are heavy and stiff, extension springs are much lighter. They are almost the opposite of torsion springs. These are perpendicular to the garage door. Tension springs are attached to the door rails. You can find these springs between the ceiling and the garage door rails. The main function of extension springs is to store energy when the door closes. The energy is released when the door is opened.

Although these two types of nibs are different, it’s unlikely you can go wrong when making your purchase. Tension springs can be further divided into:

open loop. This type is easy to replace and does not need to be dismantled.

Double looped. These are harder than open loop springs; They have two coils at each end.

clip ends. This option includes the strongest tension springs; Clip end springs have a longer service life.

All you need to know is what kind of spring is damaged and you can buy accordingly. However, if you cannot trace which spring has suffered damage, you can always seek advice from an expert.

What you should know about the spring color-coding system

Garage door springs usually come with color codes that can help you understand the size. This coding system can be confusing, so let’s discuss the tension and torsion spring color coding system. The color codes are different depending on the spring type.

Torsion springs use a color coding system based on wind direction. Black represents right wind and red represents left wind. The color code system is also used to determine wire size. This makes it easier for professionals to understand the type of spring to buy. Technicians typically look at the shape of the gauge to determine the condition of a spring.

The tension spring color coding system is designed to help technicians figure out the lifting capacity. Lifting capacity varies with different garage doors. The main factor causing these differences is garage door weight. Only certain springs can raise the garage door. The color correlates with the lifting power. Here are some examples:

Tan: 100, 200 pounds

White: 110, 210 pounds

Green: 120, 220 pounds

Yellow: 130, 230 pounds

Blue: 140, 240 pounds

Red: 150, 250 pounds

Brown: 160, 260 pounds

Orange: 170, 270 pounds

Gold: 180, 280 pounds

Light Blue: 190, 290 pounds

How to choose the torsion spring for a garage door

Our torsion spring selection guide for garage doors is designed to get you started. How to choose the right torsion spring for garage doors.

1. Determine the wire size

This is one of the most important things to consider when choosing the right torsion spring for a garage door. This will help you determine the exact size of the feather to get. Measure the entire length of the feather. There should be at least 10 to 20 turns. Measurements should be in inches.

Once you have the measurement, use wire size charts to determine the correct spring to purchase. Avoid manipulating the springs above the door when measuring.

2. Measure the inside diameter

Most garage doors have the inside diameter between the springs above the door. The inside diameter is measured to the nearest ⅙ inch. However, if you don’t have that, you can measure yourself. To do this, you should remove the spring. This can be a dangerous task, so it’s best left to a professional. Measuring the inside diameter is important so that you buy a spring that is tight and will produce just the right amount of torque.

3. Measure the overall length

If you’re wondering how to choose a torsion spring for a garage door, consider the length. Overall length is measured from end to end of a spring. This length determines the winding capacity of a spring.

Spring length should be measured to the nearest ¼ inch. If the spring is too short, the door may not open. Only measure the length when the garage door is closed.

4. Check the wind direction

Another thing to consider when choosing torsion springs for garage doors is wind direction. To check the wind direction, you need to look inside the garage door. There are two springs, left and right, which can help you figure this out. When opening the garage door, pay attention to the two springs that are in the middle.

Check the ends of the springs. The spring on the left points clockwise, the spring on the right counterclockwise. However, remember that the two springs are reversed when you open the inside of the garage door.

How to choose garage door extension springs

Do you want to know how to choose tension springs for garage doors? You have two options for this: via color codes or the weight of the garage door. Color codes provide an easier and quicker way to select which nib to buy. Always consider weight when choosing the right extension spring for a garage door. The code is at the end of the pen. While this is an accurate method of purchasing extension springs, you can use other methods.

For example, you can compare the spring to the weight of the garage door. Different doors have tension springs depending on the weight and height of the door. To measure the door you will need some clamps and a bathroom scale. Place the clamps under the lower rollers and carefully remove the tension springs. Slowly place the edge of the door on the scale. The weight that the scale shows is the size of the extension springs you should buy.

What are the recommended springs based on garage door type?

Because garage doors are different, the type of spring you buy should depend on your door. The main factors that determine the spring type are the door height and width. Here is a table of recommended springs.

Width Height Recommended Spring 8′ 7′ SK7153, SK7155 9′ 7′ SK7155, SK7157 10′ 7′ SK7159, SK7157 16′ 7′ SK7159 16′ 7′ SK7159, SK7153

How much does a garage door spring cost?

Now that you know a strategy for choosing torsion springs for garage doors, let’s talk about the cost. If a spring is damaged, it should be replaced immediately. A single spring typically costs around $120-300. Some manufacturers have springs that cost less than $20. The downside to buying cheaper ones is that they don’t last long. So, in the long run, you will end up spending more money.

The total cost depends on where you buy the springs and how many are damaged. Another thing to consider is work. Different companies have different prices for replacing springs. Regardless, it shouldn’t cost more than $500 to replace your old springs with new ones.

For example, high-quality torsion springs should not have less than 10,000 cycles. This means that they should last at least 7 years before they break. Tension springs must have about 10,000 to 12,000 cycles. Depending on the frequency of use, the garage door can last up to 10 years.

Consider STI garage doors your trusted partner

Need to replace your garage door springs? Then you’ve come to the right place with STI garage doors. We can help you choose a torsion spring for garage doors. Because we work with all types of doors, we can also help you choose a garage door tension spring. Our experts will help you to buy the right torsion and tension springs. Our services include maintenance, repair and replacement.

Because we’ve been around for years, you can only expect the best work from us. Regular maintenance allows our experts to detect damage to springs at an early stage. Avoid harmful situations by letting our experts do the work for you. Whether you have a commercial or residential garage door, no job is impossible for us. Our main goal is to ensure that all of our customers are satisfied with the services we provide.

Call STI Garage Door now to find out how to buy and respond to torsion and extension springs. Enjoy great services at a great price!

Final Thoughts

Choosing a suitable torsion spring for a garage door is very important. Knowing the type of spring that is damaged is a good way to understand which garage door spring you should buy. Garage doors have two types of springs: torsion and extension. Both facilitate the opening and closing movements of the door. They serve to store energy when the door opens and closes. To choose the right torsion spring, you need to measure the wire size, inside diameter, overall length, and coil direction. You can also use color codes based on spring wind direction. Extension springs also have a color-coding system to help professionals choose the right type. The different colors are placed at the end of a spring depending on the weight or type of garage door.

Replacing a spring can lead to accidents if not done correctly. So give STI Garage Door a call to replace your torsion and extension springs.

5 signs it’s time to replace torsion springs

Does anything else in a home have the training of a garage door opener? The door has to be opened and closed day in and day out, which means the opener has to move a heavy weight up and down multiple times. No wonder the torsion springs, which take most of the heavy lifting of a garage door opener, wear out and need replacing in less than a decade.

We created this torsion spring replacement guide to help you decide when torsion springs need replacing in garages. Here are five signs that a set of feathers is ready to go.

1. You hear the garage door opener load

If you notice the garage door making a choking sound when you open it, it means there may be something wrong with the springs.

2. The door slams without warning

A garage door that closes suddenly may have a broken torsion spring.

3. You will hear a loud popping sound when the door is closed

Sometimes you can even hear the spring break. This potentially dangerous event occurs most frequently when the spring is fully charged.

4. The door feels heavier

The weight of the garage door hasn’t changed, but it can feel heavy and almost impossible to open when the springs have snapped.

5. You can’t keep the door in the middle position

If you try to manually pull the garage door to mid-height and it creeps up or falls, it may mean the torsion springs are worn or damaged.

How often should you replace torsion springs?

Most torsion springs last 10,000 cycles. Depending on how often the door is activated, this could mean almost a decade or just a few years.

What is the lifespan of a garage door torsion spring?

There is no hard and fast rule as to how long torsion springs will last. Let’s say a garage runs an average of four cycles per day. At this rate, the feathers are expected to last seven to nine years. But if you have a very heavy garage door, the springs can wear out after four years. You can check the feathers themselves for signs of weakening. If you notice gaps between the coils of the springs, they may need to be replaced.

Springs can also wear out faster if they are too big or too small for the garage door. Look out for warning signs, e.g. B. that the door feels heavy or flies up too quickly. Replacing the springs with a different size can result in a much longer life if they work properly. Rebalancing the coils sometimes prevents them from having to be replaced, usually when installed in cold weather.

You can’t fix a garage door spring after it’s broken, so your only option is to replace the pair of springs at the same time. You want both to be subjected to equal stress, which will maintain the security of the garage door. When it’s time to remove the old springs and install the replacement springs, we strongly recommend that you contact a trained garage door technician.

To purchase reliable new torsion springs, contact IDC Spring. We sell quality options that will last for many years. Contact us today to learn more about our springs or to request a quote.

When we refer to a garage door spring, we are talking about a torsion spring or extension spring that is responsible for actually raising and closing your garage door. A garage door spring break is one of the main causes of a broken garage door and it should be easy to spot.

Fix my garage door

The best way to prevent your garage door springs from breaking is to have regular inspection and maintenance throughout the expected life of the torsion springs, and replacing them when they near the end of their life cycle. It is much better to replace your springs with new ones a few weeks early than to have them break when they finally give out, which can damage the door and cause a dangerous situation.

Not sure how long you want your garage door springs to last, or maybe it’s time for a replacement? We’ve put together a handy guide to garage door spring life expectancy below, but a general rule of thumb is 10,000 cycles or 3-5 years. This will depend on the quality of your garage door springs and other factors, but should help you determine if it’s time to replace your garage door springs or not.

Why garage door springs break:

Age

The most common reason for a broken garage door spring is simply that it’s worn out. The life expectancy of a garage door spring is not unlimited and sooner or later, like any part, it will simply fail. How long do garage springs typically last? The average garage door spring should last about 10,000 open and close cycles when properly installed.

If you only come in and out of your garage once a day, you can expect a broken garage door spring about 14 years after you first installed the spring. If you’re in and out twice a day, you’ve shrunk to 7 years. If you have children who use the garage door as an alternate entry, a spouse who runs errands several times a day going in and out of the garage every time, or regularly bring storage items in and out of the garage, that number goes down quickly.

One way to prevent your garage door spring from breaking prematurely is to purchase extended life torsion springs. They are more expansive but can last about four times as long.

rust

Of course, there are other reasons why your garage door springs may break prematurely. A big one is rust. Rust is disastrous for torsion springs, increasing friction on the hairspring and corroding the spring itself. Inspecting the springs each season and spraying them with WD-40 can keep them lubricated, healthy, and rust-free.

Too much pressure on the spring

Some garage doors may only have one long torsion spring instead of one on each side. We recommend the dual spring model as individual torsion springs have a shorter lifespan and when they fail there is no other spring intact to reduce the impact.

Get an estimate

For quality inspection, maintenance and replacement of garage door springs in the Tampa area, contact Banko Overhead Doors today.

Have you caught yourself asking, “Can I open my garage door if the spring is broken?” Good! Well, not well, because it’s probably not a pre-emptive question. Well, if one or more springs on your garage door are broken, you should avoid opening the door. It is usually possible to open the door manually, but do not use the automatic opener. In this post we will talk more about why it is not a good idea to open the garage door when a spring is broken and what you should do instead.

Get help replacing garage door springs in Dallas-Fort Worth

If there is someone nearby who can help you, you can try opening the garage door with a partner. But if you are alone and can be patient, contact us online or call us at 817-500-5988 to arrange an emergency service visit.

What happens when a garage door spring breaks?

Opening a garage door with a broken spring is dangerous. Garage doors are heavy. All automatic garage door openers have some type of spring system that acts as a counterbalance to the weight of the door. The springs provide extra support for the cables and trolley when the strike is working to open and close the door. The strike is not designed to support the weight of the door, the springs do. If the springs are damaged or broken, operating the door is risky.

Even if the gate opens and closes, every time the gate is operated, there is a possibility that it will fall despite safety sensors. You don’t want yourself, another person, a pet, or a vehicle to be under the door if it falls.

Operating the automatic opener can also damage other parts of the gate system, it can cause:

Broken or burnt gears

Broken chains or straps

Bend the rails

Can I open my garage door if the spring is broken?

The definitive answer? Yes. Is it recommended? no Do not try to open the door, especially with the automatic opener.

How do I know the spring is really broken?

There are a few ways to tell if your garage door springs are broken.

You see a break in the spring. You heard a loud cracking noise from the garage. The garage door cannot be opened

The first is obvious, you can see a visible break in the spring. There are two main types of garage door springs, torsion springs and extension springs. Torsion springs are located above the garage door opening and tension springs are located near the rails on either side of the door. If you don’t see either of these, you probably have a Wayne Dalton TorqueMaster system, it’s still a torsion spring but it’s hidden in a metal tube above the door opening.

The closest way to tell you probably have a broken spring is if you heard a loud crack like a firecracker. That’s the sound of spring breaking. If you hear the interrupt and can enter the garage through an interior door, you can go inside to confirm the interrupt. The spring can break during operation, but this is not always the case.

The last way to tell if the spring is broken is if the door won’t open. You can hear the door opener motor working and you may see movement, but the door is unlikely to open without the assistance of the spring(s).

Can my garage door springs be repaired?

no Garage door springs cannot be repaired. Springs wear out the first time they are used and can therefore never return to their original state, especially after a break.

If your springs are broken they will need to be replaced and if the door system has multiple springs it is best to replace them all even if only one is broken.

LEARN MORE: Can I just replace a garage door spring?

How to open a garage door with a broken spring

Manually raising the door is not recommended, but is possible. If you decide to open the gate manually, be extremely careful. Garage doors are heavy and feel heavier without working springs. If possible, have another person help lift the door. We do not recommend opening the door alone unless absolutely necessary.

First, unplug the garage door opener and pull the emergency release cord (ERC). Lift the garage door straight up from the bottom center of the door. You’re out of springs to support yourself, you need to secure the gate with something. This is where a partner comes in. Have your partner attach clamps to each rail under the door, the clamps should prevent the door from falling. You can also try putting ladders or 4x4s under the door.

Always be aware of your surroundings, watch your fingers, and make sure children, pets, and anyone not helping are out of the garage.

Do you have to open the door from the outside?

To unlock the garage door, you must detach the door from the cart by pulling the emergency release cord inside the garage. The easiest option is to get in through a front door, if you are locked out of the house this can be a problem. Check the closed garage door, some garage doors have an emergency release button at the top center of the door. You can release the unlocking with a key.

If you cannot access the garage through the gate or emergency release, try a window or contact a professional immediately.

Contact a professional for help replacing your springs

Arrange an inspection or replacement service with a trusted garage door company.

Turn to our team at Doorvana for service from the friendliest garage door professionals in Texas. We build, service and install garage doors in the Dallas-Fort Worth area. We invite you to learn more about our company, services and products by exploring our website. When you’re ready to talk shop, give us a call at 817-500-5988 or send us a message.

How long does a garage door spring last?

It is good practice to treat your garage door with the utmost care. Most people think that once repaired, garage doors will last forever. Garage doors are held by springs. These feathers have different sizes and life cycles. The life cycle is based on usage, i.e. the number of times a door is opened and closed. The more a garage door is used, the more its lifespan decreases and vice versa.

There are two main types of garage door springs, torsion and extension, and each has its own unique installation method and life cycle.

Torsion Spring Life Expectancy: Torsion springs are installed at the top and center of the garage door. They work by lifting the door and holding it in place. They must be replaced by a professional if damaged. Torsion springs typically have 5,000 to 20,000 cycles, which means they can last between 7 and 12 years (and even more).

Tension spring life expectancy: Tension springs are installed on the side of the door and act to stretch rather than contract (like torsion springs do). They have 15,000 and 20,000 cycles, which corresponds to a life expectancy of 7 – 12 years.

How can I determine the lifespan of the garage door spring?

Opening and closing is considered a life cycle. So how can we determine the overall cycle?

To determine the life cycle of a garage door spring, you need to consider the most important factors listed below:

The size of the wire

The diameter of the spring

The length of the feather

The weight of the door

For most residential garage doors, spring life is typically 10,000, 20,000 or even 30,000 cycles.

Choosing springs for your garage doors starts with knowing the weight of the door.

Let’s say your door weighs about 185 pounds, including the weight of the insulation. A combination of 207 x 2 x 20 is required to achieve 10,000 cycles.

Longer life springs have thicker wires. These wires are tougher and can withstand more stretching and bending than thinner wires. The thicker the wire, the more expensive the spring.

An illustration is given below

Let’s say the weight of a door is 165 pounds, you have two few spring system options that you can use.

To achieve 10,000 cycles, the spring dimension to be used should be 207 x 2 x 22. To get 20,000 cycles, the spring dimension to be used should be 218 x 2 x 26

In order to achieve 30,000 cycles, the dimensions of the springs to be used should be 225 x 2 x 33

You get about 7 years every 10,000 cycles before the spring reaches its limit and breaks.

It is much better to use the sturdier springs for your garage door than the smaller ones. You will end up spending more money using the smaller springs and end up replacing them more often.

Some factors are not considered when determining the life cycle of a garage spring. Such factors are extreme corrosion, high humidity climate and chips in the metal. Life may not reach the expected number of cycles when these factors are present. In order to increase the life of the spring, frequent lubrication of the door mechanism and proper maintenance are required. This should be done for all moving parts of the garage door. Get a good quality (lithium based) lube from your local hardware store or call a professional for a fine tune.

You can get a spring replacement for your garage door from a local shop. However, make sure that the replacement is done by a reputable company, that you make sure the door works smoothly right after the replacement, and that you get a guarantee. We do not recommend replacing a garage door spring yourself; Springs can be dangerous due to the high pressure they work with, which can injure you if not done properly. Special tools and skills are required.

Let’s replace your garage door springs

If you are in Madison, Wisconsin or the surrounding area and need to replace your garage door springs or convert from tension to torsion springs, call Madison Local Garage Door Pros at (608) 515-1449 or contact us online to schedule your service today!

7 warning signs of broken garage door springs

Garage door problems can result in immediate and inconvenient changes to your daily routines. In some cases, garage door problems can even pose a safety hazard to you and your family, especially when these problems interfere with the controlled operation of the door when opening and closing manually or automatically.

Garage door springs are among the components most likely to fail, especially if the springs in question are aged, of poor quality, or corroded. These springs are the parts primarily responsible for maintaining the tension required for your garage door to raise and lower at a constant rate.

When garage door springs break, many homeowners worry that they are facing a full door repair. Fortunately, if you have the springs replaced in a timely manner, this drastic measure is usually not necessary.

If you know the signs of a failed spring, you can make sure you’ve fixed the problem without possibly causing other damage by trying to use the door normally. In this blog, we list seven common warning signs of broken garage door springs.

1. Automatic opener does not fully open the door

Garage door springs take most of the door weight off the opening system to allow smooth operation. When newer automatic openers detect that the weight has been removed, a safety measure known as opening force is activated.

The opening force prevents the mechanism from pulling the door higher than about half a foot off the floor. This measure will prevent the broken spring from burning out the drive system or causing the door to crash unexpectedly.

2. Door closes too quickly

If your opener system does not have an open force safety feature built in, or the open force feature does not activate, the opener can continue to operate normally for the most part. However, the excessive weight of the door may prevent the mechanism from lowering it at a controlled rate.

Instead, you may find your garage door slamming down or lowering significantly faster than usual.

3. Door opens askew

Your garage door can have two different types of springs: torsion or extension. The torsion spring runs parallel to the bottom of the door while the two extension springs run perpendicular to the torsion spring on either side of the garage door.

If a tension spring breaks, one side of the door will be pulled up faster than the other. This imbalance can cause your garage door to rise crookedly.

4. Loud cracking noise coming from the garage

Garage door springs can break even when the door is not actively operated. If a spring snaps while the door is closed and not trying to open, homeowners may hear the problem rather than see it.

If the spring breaks, you may hear a thumping or snapping noise in your garage.

5. Operation involves a lot of noise

As springs wear out, normal use stresses the affected springs significantly more than they should. This extra pressure can result in unusual noises, like your garage door complaining every time it opens or closes.

Failing springs can groan, burst, or squeak. Certain garage door noises can have multiple causes, so look for the other symptoms on this list and have the door evaluated by an expert to eliminate other possible explanations for your noisy door.

6. Feathers have gaps

When a torsion garage door spring snaps in the middle, the two sides of the spring separate, leaving a visible gap, sometimes several inches wide. This is because torsion springs have plenty of room to stretch during normal operation, giving them more room to separate if they break.

If you suspect you have a broken torsion spring, close your garage door and locate the spring. If you see any gaps in the spring, it is broken and needs to be replaced.

7. Springs look rusty or stretched

Visible spring problems are not always as obvious as wide gaps. In some cases, failed springs may simply appear rusty or appear as if they have not coiled up as they should after use.

When looking at the torsion spring for gaps, examine all three springs for any visible signs that the springs are not in good condition. If you notice any strange characteristics, have the springs checked by a professional for possible problems, including progressive weakness or complete failure.

If you notice a combination of the telltale signs above, have your garage door evaluated by a garage door professional and the affected spring replaced. This visit may also provide an opportunity to identify and address other potential issues early.

If you suspect a torsion or extension spring has broken, do not attempt to use your garage door normally. Instead, schedule a repair as soon as possible to eliminate the risk of property damage and personal injury associated with this problem.

Trust Plano Overhead Garage Door for full garage door services, including installation of some of the highest quality door springs available.