How To Change Belt On White Knight Tumble Dryer? The 189 Top Answers

White Knight has issued a safety alert to warn customers that 1,800 of its condenser dryers manufactured in October 2010 could potentially catch fire. White Knight has announced that it will replace affected dryers free of charge.

The device manufacturer has said that the problem stems from a connector component that is not up to specification. According to White Knight, using this connector can potentially lead to overheating and, if left unchecked, a potential fire hazard.

White Knight is currently writing to customers to inform them of the error. The company has also released a list of affected dryer models and serial numbers, which we have included below. Read on to find out if your dryer needs replacing.

The? has tested the 77AW – one of the affected tumble dryers. The review has been updated to include White Knight’s safety advisory and you can learn more about this machine by reading our.

Which White Knight dryers are affected?

To find out if your White Knight condenser dryer needs to be replaced, you need to check if it fits one of the following models and matches a range of serial numbers:

Affected models:

0312 76A 15002 (77AW)

0312 767 15009 (767C)

0312 76A 15010 (77AW)

0312 76A 15330 (77AS)

0312 76A 31000 (CL76AWH)

Affected serial numbers:

1041 107080 to 1041 107598

1042 117759 to 1042 118046

1042 118761 to 1042 119460

1042 122230 to 1042 122329

1043 132621 to 1043 133490

1044 136464 to 1044 136613

1044 142276 to 1044 142775

1044 145676 to 1044 145975

070800, 070954, 070865, 072013, 070864 and 070738

How to check if your dryer needs replacing

To find the model and serial number of your dryer, open the door and locate the identification plate just below the main opening on the outside of the dryer as shown in the image to the right.

Both the model number and serial number are on this tag, compare to the above models.

If you discover that you have one of the affected dryers, you must stop using your dryer and unplug it immediately. Then contact White Knight using the details below.

If you have any questions or own one of the affected dryers you must contact White Knight on 0800 952 1102 if calling from the UK or 1800 844 165 if calling from Ireland.

Visit www.whiteknightrecall.co.uk for more information

Read moreu2026

If your dryer is suddenly noisier than usual, or your clothes aren’t drying, your first thought might be that it’s time to get a new one. However, the components of a dryer often do not last as long as the dryer itself.

Replacing a defective part is usually more cost-effective than opting for a completely new machine. This applies in particular to a worn dryer belt. If you choose to have it installed by a professional, your final cost will depend on labor costs. But if you want to replace it yourself, you can usually buy the strap for $25-30.

How do I know if my dryer belt is defective?

Your dryer belt is part of the mechanism that keeps your clothes in constant motion while drying in the dryer. When that belt wears and tears, there are warning signs in the way your dryer sounds and how well it performs. You may want to troubleshoot the dryer if:

Your dryer starts to make noise

A belt is used to rotate your dryer drum on both electric and gas models. This thin, long belt wraps around the drum and pulley and drives the dryer motor. The idler pulley gives tautness to the drum belt to prevent slippage when your dryer has a load inside.

However, when the idler pulley starts to wear out due to high-speed rotation, increased friction can cause your dryer to make squeaky or squeaky noises. As it dries out, frays, and continues to wear out with age, the noise resembles a throbbing or grating noise.

The drum stops turning

After years of continuous use, your dryer belt can gradually weaken until it reaches its breaking point. When this happens, the belt breaks and the drum can no longer twirl your clothes in the hot air of the dryer.

Even if your dryer’s electric motor and heater keep working, chances are your clothes won’t get dry.

Home appliance repair service near me

253-486-9072

What would cause a dryer belt to break?

Most dryer belts break for the same reason: from being subjected to excessive friction or stress. The drum acts as a pulley on most tumble dryers. The belt that spins the drum is wrapped around it and then around a small pulley connected to the electric motor.

Excessive friction can occur when the dryer motor spins but the drum stays in place. When this occurs, the belt is prevented from moving, causing the engine’s pulley to burn it from friction.

Overloading your dryer can cause this. Being subjected to a heavy load causes the motor to attempt to continuously rotate the pulley and belt during the drying cycle.

Friction burns through the belt as it tries to turn the drum, which could break it and increase the risk of a dryer fire.

When should I replace my dryer belt?

A dryer belt wears out over time due to the tension and heat it must endure. There may be subtle signs initially as wear is minimal. For example, the belt can be slightly stretched; however, it remains on the pulley and rotates the drum.

At this point, you may not notice the unusual noise your dryer is making, and you probably don’t need to replace it just yet. Because the drum rotates, it can still dry your clothes.

As the belt continues to stretch, it loses its ability to turn the drum. Even if it doesn’t break completely, it can stretch to the point where it falls off the pulleys and can’t be moved by the engine. When a worn belt is affecting your dryer’s function, it’s time to replace the belt.

Get a 90-day parts and labor warranty from Top Shelf

The cost of replacing a dryer belt is often significantly less than the cost of a replacement dryer. It’s a relatively simple fix that will get your squeaky, dysfunctional dryer working like new again! And if you don’t want to fix it yourself, call Top Shelf Services!

We have the tools and know-how to get the job done quickly—and get it right the first time. We also offer low prices, a 100% satisfaction guarantee and a 90-day warranty on all parts and repairs. Contact Top Shelf Services now by calling or filling out our online service request form.

Click here to contact Top Shelf Appliance Repair Services today

As an Amazon Associate, we earn from qualifying purchases at no additional cost to you.

If you’ve heard your dryer make a series of thumping and slapping noises, you most likely didn’t realize that the belt went bad to begin with. Worn dryer belts are fairly common, however, especially on older dryers.

Before you buy a brand new dryer or dryer belt, you should consider whether the belt is actually broken. Surprisingly, it’s not a very difficult task and well worth the few extra minutes, even if a replacement is required at the end.

Dryer belts usually last the life of the dryer. This is usually 8 to 14 years. Frequent use and heavy loads increase the rate of wear and reduce the life of the dryer. Sometimes belts need to be replaced even if they are not broken and are just loose. In other cases, loose straps can be tightened.

Average life of the dryer belt

On average, a dryer lasts around 8 to 14 years. As with every appliance in your house, the more you use your dryer, the quicker it will break down with wear and tear.

The belt is a key component for a properly functioning dryer. The belt wraps around the dryer’s drum, rotating your laundry load as it dries. Again, more laundry loads shorten the life of your belt and dryer.

As your dryer ages, the belt becomes more and more likely to break. Booming noises during operation are a good indication that the belt is stretching from tight to loose.

Likewise, a broken belt can also produce throbbing noises. However, it may seem like the rest of your dryer is working fine if the dryer boots up normally. You can be sure the belt is the problem if the drum won’t spin or stops prematurely at the end of the cycle.

Reasons why dryer belts break prematurely

The dryer pulley, also called an idler pulley, keeps the dryer belt under tension as it rotates the drum. This tension allows the system to function properly and can cause the belt to break prematurely if it is too tight or too loose.

The dryer strap should be taut, but give slightly when pulled. Typically, the idler pulley can be pushed toward the motor in the dryer to relieve belt tension.

One of the most common reasons a dryer belt wears out prematurely is that the idler pulley is not moving freely. If this is the case, the tension in the belt is too high, causing it to heat up and stretch.

Dryer straps can also break because the strap is too loose. If the belt is loose, it can slip off the rotating drum, causing a thumping noise. A similar result to a belt that is too tight occurs when the temperature and strain are too high, damaging the belt.

Besides the tape, there are a variety of reasons why the dryer isn’t working properly and it can help you to know some of them. Here is a troubleshooting video:

Not all belts break when they need to be replaced

Dryer straps don’t have to break completely for your dryer to not function properly. As the belt is looped around the drum when many garments are being tumbled around, it is natural that it will eventually stretch.

As the dryer belt stretches and increases in size, your dryer will start making throbbing noises. Those thumping sounds are the dryer belt changing from tight to loose. It’s not always possible to tighten the belt, especially when he’s getting too old.

Knocking noises can also be caused by the idler pulley, which tensions the dryer belt in the first place. Luckily, once the dryer is open, it’s pretty easy to check and pinpoint the problem. If the belt has been stretched unusably, you can most likely see signs of wear on the belt itself.

Although it may not completely break, the belt will need to be replaced in these cases. Using a stretched belt not only creates annoying knocking and banging noises, but could further damage other connections in the dryer.

Diagnosing a loose belt versus a broken belt

Depending on the severity, a loose belt can be fixed relatively easily. If the slack is due to tension, the belt may not need to be replaced. Adjusting the idler pulley by moving it closer to the dryer motor would solve this problem.

If the belt is loose because it has been stretched, the belt will need to be replaced. A loose belt due to the belt itself can be identified by the noise your dryer makes during a cycle. Knocks and pops can be heard when your clothes get tangled and the strap needs to be replaced.

A broken belt also requires a replacement. However, unlike a loose belt, a broken belt doesn’t always make the same loud noises as a loose one.

When you turn on your dryer to start a cycle, the drum doesn’t spin at all. All you hear is the sound of the engine and you know the belt has completely snapped.

Sources

https://removeandreplace.com/2020/09/15/dryer-repair-does-your-dryer-belt-need-to-be-replaced/#:~:text=Dryer%20Belt%20Sounds&text=Over%20time% 2C%20the%20belt%20in,with%20a%20load%20in%20it.

https://www.millionacres.com/real-estate-market/articles/how-long-do-dryers-last-and-how-can-yours-last-longer/

https://homeguides.sfgate.com/how-to-troubleshoot-a-charcoal-grill-13768632.html

4 Signs You Need to Replace Your Dryer Belt

https://www.sidmartinbio.org/what-passes-if-dryer-belt-is-too-tight/

https://www.partselect.com/Dryer+inspect-pulley+repair.htm

Fix Clinic VIP Email

Join the Repair Clinic VIP email list to receive updates and special offers!

As an Amazon Associate, we earn from qualifying purchases at no additional cost to you.

A broken belt doesn’t mean you have to say goodbye to your dryer. Each tutorial promises that replacing your old belt is a quick and easy task. Apparently this can only go wrong if you choose the wrong belt size. But how do you know what size you need?

Look no further! From different methods of finding the perfect fit for your dryer to a list of actual dryers and their belt sizes, this guide covers everything you need to know about belt sizes.

Dryer belt sizes can vary depending on drum size, make and model, and dryer type. Common sizes are 92 1/4″ and 93 1/2″ long and 1/2″ or 1/4″ wide. Finding the right size is important to ensure dryer function. The size may be marked on the old belt, but a phone call to the manufacturer will also give you the correct size.

Are all dryer belts the same size?

Not all dryer belts are the same size. Dryer belts vary in diameter and length depending on the size, make and model of dryer in which they are installed.

The dryer belt is a key component of any dryer. It allows the dryer drum to rotate when the engine is running by wrapping around the dryer’s drum and pulley system.

Therefore, the size of the dryer belt is directly related not only to the size of the dryer drum, but also to the weight that the drum can handle. You should know this weight so that you do not overload the drum with clothes. Also avoid tumble drying soaking wet clothes as they are always heavier.

The width and length of the belt also vary to perfectly match the specific pulley system used in a particular dryer.

Dryer belts aren’t really interchangeable. If you want your dryer to work properly, you need to find a belt that fits it perfectly. Otherwise the belt will cause problems.

How do I know what belt size my dryer uses?

There are several techniques to help you figure out what size belt your dryer needs. However, some of these methods are more reliable than others.

For example, some people recommend removing your old belt from the drum and measuring it. Unfortunately, this method can be very deceptive as dryer belts stretch over time.

At best, if you install a new belt that is as long as your old stretched belt, you risk the belt slipping over and over again and you will have to repair it periodically. In the worst case, the drum can no longer rotate properly due to a lack of tension, or the belt melts and tears.

Either way, you will eventually need to buy a new belt.

Luckily for dryer owners, there are two much easier, and more importantly, more reliable, ways to figure out which belt size you should buy.

First, you can examine your old belt and look for its product number. The length of most belts is even noted directly so that you can easily read it and order the right size.

However, it is best to contact your manufacturer or visit their website.

Instead of the Products window, open the Parts window and find the exact belt that was used in your dryer by typing the dryer product number into the search window and looking at the dryer belt product number.

This should allow you to order the part directly from the manufacturer. Alternatively you can look up the part on Amazon, eBay or other sites like this one.

Or just keep reading and check out the chart we’ve put together for you!

Most common dryer belt size according to…

drum size

As previously mentioned, the size and capacity of the drum are probably the most important determinants of dryer belt size. Let’s look at some of the most common capacities that dryers come with to see what belt size is most commonly used for these.

Dryer Drum Capacity Belt Size 7.8 Cubic Feet Drums with one of the largest dryer capacities available require a belt that is approximately 97.9″ long. 7.4 Cubic Feet These drums typically require a belt that is 93 1/2 inches long and 1/4 inch wide. The second most popular size for these belts is 92 1/4″ long and 1/4″ wide. 7.2 Cubic Feet Many drums with this capacity work perfectly with 89 1/2″ long and either 1/2 or 1/4″ wide belts. However, other brands require 92″ long and 5/16″ wide straps. 7 Cubic Feet Most brands that sell dryers of this size use either 92 1/4″ or 92 1/2″ long belts with a 1/4″ width. 5.9 Cubic Feet Surprisingly, most of these smaller dryers require their belt to be between 93 and 93 1/2″ long and only 1/4″ wide. 4.2 Cubic Feet These compact dryers typically use 76 1/10″ belts. 4 cu ft dryer with a capacity of four cb. ft. are often condensers, and they require a belt that is at least 76 inches, but more often 77 1/3 inches long.

Make

GE Dryers A typical strap for some of the most popular GE dryers is 89.5 inches long with 4 ribs on the inside for a good grip.

For their larger capacity dryers they use the WE03X29704 belt. The GE website doesn’t list dimensions for this belt, but based on our research, it should be approximately 97.9 inches long (but don’t quote me on that!). Whirlpool Dryers By far the most common belt size for some of the most popular whirlpool dryers is 92-1/4″ long and 1/4″ wide. The second most popular length of hot tub strap is 93 1/2″ while both sizes have 4 ribs and 3 grooves. Maytag Dryers Although owned by Whirlpool, Maytag still manufactures its own products and is technically independent in product design.

However, the equipment parts are often sold by Whirlpool. As such, they use the same drive belts for dryers, with the most common size being 92 1/4″ long and 1/4″ wide. LG Dryers Most of the most popular LG dryers have belts that are 92¼ inches long and 1/2 inch wide. Samsung Dryers Compared to other manufacturers we’ve covered so far, Samsung dryer belts are the most unique in terms of size.

A common length of a Samsung belt is 92″ while the width is 5/16″. The strap also has 5 ribs and 4 grooves instead of the typical 4 and 3 we see from the other brands.

Does it matter if the size is the same?

From comparing different sizes and manufacturers of dryer belts, we can see that the make and model of the dryer is almost as important as the actual capacity of the dryer drum.

This could be because the barrels have slightly different girths or are built for slightly different amounts of weight. Or there could be differences in the engine’s pulley system.

In any case, belt size can differ from brand to brand, as can the material of the belt. Using a belt from another manufacturer and something going wrong with the dryer could void your warranty.

dryer type

Gas The majority of the gas dryer belts I compared were 92 ¼ inches long. They usually have 4 ribs and 3 grooves. The second most popular length was 93 ½”, also with 4 ribs and 3 grooves. Occasionally, if the dryer has a smaller drum, you’ll find a gas dryer with a belt about 89 ½ inches long.

These dryer belts are typically either 1/2″ or 1/4″ wide. Electric The most common belt size for electric dryers is 93 1/2″ long by 1/4″ wide, followed directly by the size of 92 1/4″ long by 1/4″ wide.

Similar to gas dryer belts, these belts typically have 4 ribs and 3 grooves. Additionally, the smaller capacity electric dryers typically have belts that are 89.5 inches long. Condenser dryers are typically more compact and therefore have a smaller drum that requires a shorter belt. These belts can range in length from 76″ to 89.5″, with the most common lengths being 77 1/3″ and 77 ½”.

They are often flat with 4 ribs. A common width for condenser dryer belts is 1/4″. Washer/Dryer Combo These belts are typically 92 1/4″ long and 1/4″ wide and typically have 4 ribs and 3 grooves.

However, another common occurrence is a belt that is flat, has 4 ribs, and is 79 1/8″ long and 1/4″ wide. Steam dryer belts for steam dryers are often 92 1/4″ long and either 1/4″ or 1/2″ wide. Generally they have 4 ribs and 3 grooves. Heat Pump Dryers Normal size heat pump dryers usually have belts that are 93 1/2″ long and either 1/4″ or 1/2″ wide with 4 ribs and 3 grooves.

More compact sizes may have 76″ or 77 ½″ long belts.

Table of common dryer belt sizes

Sources

https://www.searspartsdirect.com/

https://www.repairclinic.com/

https://www.a-1appliance.com/sections/maytag-appliance-parts

What to do if your dryer won’t spin? Before calling a repair technician, follow these tips to see if there’s an easy DIY solution.

It’s a common problem: you put a load of wet towels in the dryer, only to find your dryer won’t spin. There are a variety of issues that can cause your dryer not to spin. So how can you determine the cause of the problem?

Dryer broken? Do you need a professional now? Book a qualified, local repair professional in just a few clicks with American Home Shield ProConnect. Click here to book now. *Available in most major markets. Services vary by market.

First, check if your dryer is plugged in or not. If this is the case, check your fuse box to make sure the dryer’s two circuit breakers are on. If they don’t, reset them.

If the plug and circuit breakers are OK, check the dryer door switch. When you close the dryer door, a plastic pin should click and activate the switch to start the dryer. If the pin is bent or broken, you need to straighten or replace the pin. If the pin is fine, the switch is probably defective and needs to be replaced.

If your dryer starts but the drum won’t turn, it’s probably due to one of these common reasons.

1. Defective drive belt

A broken drive belt is the most common reason a dryer won’t spin. To fix this problem, rotate the drum by hand. A working belt should offer some resistance. So if the drum turns very easily and loosely, the belt has probably snapped. Unplug your dryer and remove the lid so you can check the belt to make sure it’s broken.

2. Worn drum rollers

Most dryers have two drum support rollers on the back of the drum, and some dryers also have two in front. If the rollers do not spin freely, the motor will overload and the dryer will stop. To determine if the drum rollers are worn, remove the belt from the dryer and rotate the drum by hand. If the drum does not spin freely, check the rollers for wear. If one or more reels aren’t spinning freely, it’s a good idea to swap them all out at once.

3. Worn roller axles

When the drum roller axles are worn, the drum rollers will not rotate freely, causing the dryer to stop. Examine the roller axles while checking the rollers for wear. If the drum rollers spin freely without wobbling, the axles are in good condition. If the roll wobbles, the axles must be replaced.

4. Worn drum glides

The drum glides are small plastic pieces that support the drum. As the drum rotates, it slides on the drum glides. As the drum glides wear, the drum can begin to bind, stressing the motor and causing it to shut down. Inspect the drum sliders for wear and replace if necessary.

5. Worn drum bearing

The drum bearing supports the back of the drum. As it wears out, it puts stress on the engine and causes it to stop. To determine if this is the problem, remove the dryer band and spin the drum by hand. If the drum is difficult to turn and/or squeaks or rubs when turning, the bearing is worn and needs to be replaced.

If these tips don’t help fix your dryer that won’t spin, your home warranty may help. The service technician can diagnose the problem and get your dryer back in service. See your American Home Shield Warranty for details.

Sources:

https://www.repairclinic.com/RepairHelp/How-To-Fix-A-Dryer/2—/Dryer-Stopped-Spinning

https://www.doityourself.com/stry/troubleshooting-a-clothes-dryer-drum-doesnt-tumble

https://homesteady.com/info-8698123-drum-stopped-spinning-whirlpool-dryer.html

http://pretired.org/pretirement-how-to/dryer-heats-up-but-wont-spin-heres-how-to-fix-it-for-5/

Q: Recently I noticed that my dryer squeaked every time I ran it. Should I be concerned or is this just normal wear and tear?

A: Dryer squeaking is definitely not normal wear and tear. It usually indicates that a part has worn out and needs repairing. First, try to identify the location of the squeak: top, back, front, or bottom (and make sure the squeak isn’t coming from the floor). This helps determine which part may be malfunctioning and can give an indication of how small or large a repair may be needed and whether or not it’s a good idea to consult a professional. Here are some possible causes of the problem.

Squeaky dryer? Maybe it’s time to call in a pro. Get free, no-obligation project estimates from appliance repair professionals in your area. Find a Pro+

The roller wheels or bearings may not be properly lubricated.

Ideally, the squeaky sound of the dryer comes from the wheels or bearings at the bottom of the dryer; This is a relatively easy problem to solve. The rotation of the dryer drum, especially with bulky loads, causes the dryer to move slightly during operation. If the wheels or feet on the bottom of the dryer have become loose or uneven, they may make a squeaking noise. You can try putting a little WD-40 on them to grease them and get rid of the squeaking noise. If your dryer is on screw-in legs, simply tighten them up.

Alternatively, the squeaking noise can be caused by small foreign objects in the drum or in the lint filter of the dryer. Coins, paperclips and other similar objects can easily be found in the drum and removed. To inspect the lint filter, unplug the dryer and then look inside the opening. If you see a stuck object, use work gloves to remove it.

The dryer belt may be worn and need to be replaced.

Because dryers operate at high temperatures, it is not uncommon for a dryer belt to become worn and cracked over time. If the squeak is coming from the top of the dryer, a worn dryer belt may be the culprit. You can inspect the belt for tears or see if it’s loose by first unplugging the dryer and then opening the dryer cabinet.

You can extend the life of the dryer belt by rubbing soap on it or spraying it with belt lube, but if the belt shows signs of wear it may be better to order a replacement part and have it installed to avoid problems later.

Leave the appliance repair to the professionals Get free, no-obligation repair estimates from licensed appliance technicians near you. Find a Pro+

The idler pulley may have lost traction and need to be replaced.

A squeaking sound from the dryer coming from underneath may indicate a problem with the idler pulley. This part is an automatic tensioner on the dryer belt. You can check the condition of the idler pulley: if the pulley is broken or loose, it would result in dryer squeaking. In this case, some dryers will require replacing the entire pulley, while others will only require replacing the wheel.

The sleeve bearings of the drum may be defective and need to be replaced.

Another possible cause of a squeaky dryer is the drum’s failed sleeve bearings, which cause a squeaking or rubbing noise towards the front of the dryer. This part helps the drum slide smoothly as it rotates against the front seal. You can check whether the plain bearings are worn. Minimal signs of wear can be reason enough to replace the part. You may also want to replace the front seal if it has been damaged by the failed drum sleeve bearings.

advertisement

The dryer bearings and motor need to be replaced.

A bad engine is usually identified by squeaking or grinding noises, not by the smell of burning. If the squeaking noise is coming from the back of the dryer, a bad motor or bad bearings could be the problem. This problem should be rectified immediately: Rubbing bearings can damage the motor.

With the dryer unplugged, you can open the unit and see if the bearings need lubricating or replacing. Replacing the motor may require removing cables, clamps or the pulley. So if this seems a little more daunting, it may be worth hiring a professional who can do the job confidently.

Nothing sheds a wet blanket on laundry day like a dryer that doesn’t spin. But there is often a quick and easy fix.

Here at Asurion we don’t just fix appliances, we fix the frustration you feel when yours doesn’t work – whether it’s a dryer that doesn’t get hot or one that won’t start at all. We’ll explain why your dryer won’t spin and how to get it running again.

Why isn’t my dryer spinning?

There are several common reasons – some harder to diagnose than others – why your dryer may have stopped tumbling. They include:

Your dryer is not connected.

Your circuit breaker is off.

Something has blown your thermal fuse.

Your door switch is not working.

Your drive belt broke.

Your drum rollers are defective.

Your roller axles are worn out.

Your drum bearing has deteriorated.

Your engine is defective.

Let’s start with the simplest fixes, then dig into solutions that require a few more steps or require the help of an appliance pro. Please do not attempt to repair anything involving high voltage electricity or flammable gas without proper training.

Your dryer is not connected

The most common reason your dryer – or any other appliance – stops working is that it’s unplugged.

It sounds easy, we know that. However, check if the cable or plug has come loose. If so, reconnect it.

Your circuit breaker is off

If your dryer is plugged in but still won’t spin when you press start, check your fuse box to make sure the dryer’s circuit breakers are on. If they don’t, reset them.

Something has tripped the thermal fuse

If your dryer isn’t spinning, it’s possible the appliance is getting too hot and has tripped the thermal fuse, a safety feature that prevents a fire from starting.

You may be able to reset the fuse, but it usually needs to be replaced. Before you do that, you need to figure out why it’s triggered – it could be a warning sign that your dryer is a fire hazard. It’s important that you have it examined by a repair professional to understand and resolve the underlying cause of the problem.

Nobody needs housework anymore Broken appliance? We can fix it quickly. Just schedule a repair appointment and our experienced experts will fix it in days, not weeks. Schedule a repair

Your door switch is not working

If your dryer still doesn’t wobble, check the plastic pin on the door switch. When it works, the pin will click and start the dryer when you close the door. If the pin is bent, try to straighten it. If the pin looks good and the dryer still won’t start when you close the door, you may need to replace the switch.

Your drive belt broke

One of the most common reasons your dryer won’t spin is that the drive belt has snapped. To find out if that’s the problem, open the dryer door, reach inside, and try turning the big round cup — the drum — by hand. If it spins too easily, the belt has probably snapped and needs to be replaced.

Your drum rollers are worn out

If the drum rollers — small wheels that hold the drum in place as it rotates — are stuck or not spinning freely, they may be worn. An easy way to check if these parts are not working properly is to open the dryer door and look at the back panel. If there is a gap between the drum and the wall, you will likely need to install new drum rollers.

To find out for sure, unplug the power cord, unscrew the dryer lid (or the back, depending on the model), remove the belt from the dryer, and spin the drum by hand. If one or more reels are stuck or not spinning freely, you may need to replace them. If they spin freely, they are most likely fine.

Your roller axles are worn out

After removing the top or back of the dryer, check to see if the roller axles—those key components, also known as roller shafts—wobble as you rotate the drum rollers. If so, it’s time for new ones.

Your drum bearing is worn out

The drum bearing is the part that supports the back of the drum. While removing the dryer tape, rotate the drum by hand. If the drum has completely seized up or squeaks or scrapes when turning, the bearing is probably broken or worn and is stressing the motor. It may be time for a replacement.

Your engine is broken

A working engine is critical to the proper functioning of your dryer. If your dryer drum isn’t turning, the motor may be overloaded, strained, or simply worn out. In this case you must replace it.

Still need help with your dryer? Schedule a repair with an Asurion Appliance Repair Expert. We’ll get you up and running quickly.

Aerial view of the Crosslee factory

The tumble dryer manufacturer announced that it would stop production at the factory, citing rising costs, foreign imports and competition from online retailers.

The company says it is no longer viable to continue making tumble dryers and that a period of joint consultations with employees will now begin to explore alternatives to the closure.

Karl Stephenson, Unite Regional Manager, said: “The closure of the Crosslee plant is a serious blow to the workforce, their families and the wider West Yorkshire economy.

Sign up for our daily Halifax Courier Today newsletter. Registration Thank you for registering! Sorry, there seems to be some issues. Please try again later. Send…

Crossle, Hipperholme

“Unite has a handful of members on site and over the coming days and weeks we will provide them with maximum support – and we will be exploring hiring opportunities across the business with management.”

Colin Raistrick, Independent Councilor for Hipperholme and Lightcliffe Parish, said: “I hope they can sell it. It was a major employer in the region. It employed 650 people at one point and two of my neighbors worked there.

“I hope they take care of people who have been working there for a long time.

“I can’t say I’m surprised by the news. I think the main concern for local residents will be what happens to the site in the future. It’s a big site.

Colin Raitrick.

“There was a Hipperholme master plan in the past for the large site across the street with plans for shops and a supermarket.

“It doesn’t want to remain derelict, but it’s only 500 meters from the junction, which has to be taken into account.

“There will be a domino effect for the entire community. The people who work there aren’t going to buy sandwiches and things like that, so it’s bound to have an impact.”

George Robinson, Conservative Councilor for Hipperholme and Lightcliffe Ward, said: “Crosslee has been the manufacturing center of Hipperholme for decades and home to the renowned White Knight brand.

Councilor George Robinson, Conservative, Hipperholme and Lightcliffe

“The company has promoted Hipperholme, while at the same time creating jobs for the local population and supporting local events.

“This announcement is sad for the local community but understandable given the continued pressure that cheap imports from outside the EU have put on UK manufacturing.

“I understand there is a consultation looking at alternative options. I hope to work closely with the company to ensure all outcomes have a positive impact on the Hipperholme region.”