Are you looking for an answer to the topic “how to add flash to a photo already taken“? We answer all your questions at the website Chewathai27.com/ppa in category: Aodaithanhmai.com.vn/ppa/blog. You will find the answer right below.
Table of Contents
Can I add flash to a photo already taken?
The Isolite Lets You Add Flash On or Off After the Picture Has Been Taken.
How do you make a picture look like it was taken at night with flash?
Try using a hard light source to complete the illusion. You can also try it to enhance the images you actually make at night. Add a small pool of light to really highlight your subject. In this case, you could try using an appropriate white balance for the situation, and then add a blue gel to your flash.
Where is the Retouch tool on iPhone?
- Launch the Photo Editor app.
- Select the location of your image or take a new picture with the Camera icon.
- Next, tap on the photo filter icon located at the bottom-right of your screen.
- After that, choose the many retouching tools offered to you.
Making Photos That Look Like They Were Shot at Night
How to retouch photos on iPhone with third-party apps
You can find a variety of apps that offer photo retouching tools in the App Store. This is because it is one of the most preferred features for all photo editing apps. We have discussed two photo editing apps in this guide that you can use to touch up any photos on your iPhone. These are Photo Editor app and Blur Photo Editor app. Both apps are compatible with both iPhone and iPad.
Photo Editor app is considered to be one of the best photo editing apps for iPhone and iPad. In comparison, Blur Photo Editor is a photo editing app that specializes in blurring parts of an image or your photo background. Want to find out how to blur background on iPhone to get the stunning bokeh effect for your picture? Blur Photo Editor app is your answer. This app also has a collection of photo retouching tools.
How do I enhance Photos on my iPhone?
- In Photos, tap a photo or video thumbnail to view it in full screen.
- Tap Edit, then swipe left under the photo to view the effects you can edit such as Exposure, Brilliance, Highlights, and Shadows.
- Tap the effect you want to edit, then drag the slider to make precise adjustments.
Making Photos That Look Like They Were Shot at Night
After you take a photo or video, use the tools in the Photos app to edit it on your iPhone. You can adjust light and color, crop, rotate, add a filter and more. If you don’t like how your changes look, tap Cancel to revert to the original.
When you use iCloud Photos, any changes you make to your photos and videos are saved across all of your devices.
Adjust light and color In Photos, tap a photo or video thumbnail to view it in full screen. Tap Edit, then swipe left under the photo to see the effects you can edit, such as B. exposure, brilliance, highlights and shadows. Tap the effect you want to edit, then drag the slider to make precise adjustments. The amount of adjustment you make to each effect is indicated by the outline around the button, so you can see at a glance which effects have been increased or decreased. Tap the effect button to toggle between the edited effect and the original. Tap Done to save your changes, or tap Cancel if you don’t like your changes, then tap Discard Changes. Tip: Tap to automatically add effects to your photos or videos.
Crop, rotate, or flip a photo or video In Photos, tap a photo or video thumbnail to view it in full screen. Tap Edit, tap , and then do any of the following: Manual crop: Drag the corners of the rectangle to include the area you want to keep in the photo, or pinch the photo open or closed.
Crop to a preset standard ratio: Tap , then choose an option like Square, 16:9, or 5:4.
Rotate: Tap to rotate the photo 90 degrees.
Flip: Tap to flip the image horizontally. Tap Done to save your changes, or tap Cancel if you don’t like your changes, then tap Discard Changes.
Straighten and adjust perspective In Photos, tap a photo or video thumbnail to view it in full screen. Tap Edit and then tap . Swipe left under the photo to see the effects you can edit: Straighten, Vertical, or Horizontal. Tap the effect you want to edit, then drag the slider to make precise adjustments. The level of adjustment you make for each effect is indicated by the button’s border, so you can see at a glance which effects have been increased or decreased. Tap the button to toggle between the edited effect and the original. Tap Done to save your changes, or tap Cancel if you don’t like your changes, then tap Discard Changes.
Apply filter effects In Photos, tap a photo or video thumbnail to view it in full screen. Tap Edit, then tap to apply filter effects like Vivid, Dramatic, or Silver Tone. Tap a filter, then drag the slider to adjust the effect. To compare the edited photo to the original, tap the photo. Tap Done to save your changes, or tap Cancel if you don’t like your changes, then tap Discard Changes.
Restore an edited photo After you edit a photo and save your changes, you can revert to the original image. Open the edited image, tap Edit, then tap Revert. Tap Restore Original.
How do I change my Iphone photo with so much flash?
- Upload your overexposed photo.
- Head over to Photo Edit and find Tools.
- In the tools section, click Adjust and select Exposure.
- Bring the adjustment bar to the left to reduce your photo’s exposure.
- Share your new photo!
Making Photos That Look Like They Were Shot at Night
Shared materials from Strapi
* ONLY resize the images. Please go to Strapi to edit the material information.
What is Exposure: Overexposure vs. Underexposure
In photography, exposure is the amount of light that reaches your camera’s sensor. This determines how light or dark a photo will be. Exposure can drastically change how your images look when you’re taking pictures with your phone or a professional camera. Here’s a closer look at the concept of exposure:
Very exposed
When your photos look lighter than they should, or lighter than what you see in real life, that’s a classic example of overexposure. You’ll notice that colors like black look grainy and pixelated, while colors like white seem to glow.
Correct exposure
Getting the exposure right means you have the perfect match between shutter speed and ISO sensitivity. You may not know how to adjust these settings on your phone, but you basically have a balanced photo if nothing is overexposed or lost in the shadows in your images.
underexposure
When your photos appear darker than they should. This is the result of not enough light hitting your camera sensor. Underexposed photos look too dark and lack detail in the shadows, sometimes making the photo look hazy.
How to fix overexposed photos on iPhone and Android
There’s nothing worse than taking a picture and knowing it would be perfect if it weren’t so bright. Luckily, there’s a quick way to fix your flash in photos! Learn how to quickly fix an overexposed photo on iPhone or Android in three easy steps with YouCam Perfect.
1. Download the YouCam Perfect app
Shared materials from Strapi
* ONLY resize the images. Please go to Strapi to edit the material information.
The first step is pretty simple: download the YouCam Perfect app. Available for iOS and Android, you can fix your overexposed photos with just a few taps.
2. Correct overexposed photos automatically
If your photo looks a little brighter than it should, you can quickly fix it with YouCam Perfect’s automatic adjustment tool. The app analyzes your photo flash and makes the necessary adjustments to give you the right exposure with a tap of your finger. That’s how it’s done:
Upload your overexposed photo
Go to Photo Edit and find Tools
and find in the tools panel, click on Adjust and select Automatic
and select Show changes immediately
If necessary, play with the adjustment rod
Save your changes and share them!
3. Correct overexposed photos manually
The automatic adjustment tool does not give you the desired photo quality? Don’t worry! You can still make manual adjustments to turn your overexposed pic into an Insta-worthy pic. To use the manual adjustments:
Upload your overexposed photo
Go to Photo Edit and find Tools
and in the tools panel click on Adjust and select Exposure
and select Bring the adjustment bar to the left to decrease the exposure of your photo
Share your new photo!
👉 Read: How to Enhance a Photo Like a Pro
How to fix underexposed photos on iPhone and Android
On the other hand, an underexposed photo will be dark and cloudy. There are no details and you cannot see what is happening. Trying to fix an underexposed photo can be difficult because most of the time it doesn’t look balanced. Compensating for an underexposed photo is easier than ever with the YouCam Perfect app. Follow the steps below for two easy ways to do this.
1. Automatically adjust dark photos
If you prefer the do-it-for-me method, the automatic adjustment tool in the YouCam Perfect app is for you. When you use this tool, the app will analyze your photo to examine areas of enhanced exposure and give all those shadows some much-needed light. Here’s how you can try this tool for yourself:
Upload your underexposed photo
Go to Photo Edit and look for Tools
and look for In the tool panel, tap Adjust and select Auto
and select Let the app work its magic and fix exposure and other adjustments
Save your changes and share them!
2. Brighten dark photos manually
Sometimes you prefer to do things your way. Maybe you don’t want a perfectly balanced image, but still want to correct some of that underexposure. You can use manual adjustments to control how much exposure you give your image for those underexposed photos. That’s how it’s done:
Upload your underexposed photo
Go to Photo Edit and find Tools
and click Adjust in the Tools panel and then click Exposure
and then play with the adjustment bar to slightly increase the exposure
Share your new balanced photo!
👉 Read: How to Enhance a Photo Like a Pro
Try other adjustments to manage your exposure
Sometimes you may need to play with other adjustments to get the results you want. It’s possible with the YouCam Perfect app! In the tools area you have various customizations including:
contrast
brightness
highlights
The shade
light
Dark
saturation
temperature
hue
Sharpen
HSL
Download YouCam Perfect: the best free app to fix underexposed or overexposed photos
Ready to get perfectly exposed images every time? Download YouCam Perfect now to get started!
Shared materials from Strapi
* ONLY resize the images. Please go to Strapi to edit the material information.
related posts
Want more photo editing tips and tricks? Subscribe to the YouCam Perfect YouTube channel and follow us on Instagram for creative editing ideas and awesome selfie tips!
How do I add light to my face in Photoshop?
- Step 1: Add A Curves Adjustment Layer. …
- Step 2: Drag The White Point Down To Darken The Image. …
- Step 3: Select The Lasso Tool. …
- Step 4: Draw A Selection Around The Area You Want To Highlight. …
- Step 5: Fill The Selection With Black. …
- Step 6: Apply The Gaussian Blur Filter.
Making Photos That Look Like They Were Shot at Night
Written by Steve Patterson.
In this Photoshop tutorial, we’ll look at how to use a simple and easy-to-create lighting effect to draw focus and attention to a specific part of an image. This technique is also a great way to add interest to a photo that could use a little more visual snap.
Here’s the image I’ll be working with in this tutorial:
The original photo.
Obviously the woman in the photo is attractive, but the picture itself could be more interesting. Let’s draw more attention to her face by making a simple and subtle adjustment to the lighting in the image. This is what it will look like when we’re done:
Photoshop light effect: The end result.
This tutorial is from our photo effects series. Let’s start!
Step 1: Add a Curves Adjustment Layer
Let’s start by darkening the overall image with a Curves adjustment layer. First we need to add the adjustment layer, so click the New Adjustment Layer icon at the bottom of the Layers palette:
Click the New Adjustment Layer icon.
Then select Curves from the list of adjustment layers that appears:
Select a Curves adjustment layer.
Step 2: Drag the white point down to darken the image
When the Curves dialog box appears, you see a large square grid with a diagonal line running through it from lower left to upper right. We can control the tonal range of the image by reshaping this line. If you look to either end of the line you will see a small square dot. The dot in the lower left represents areas of pure black in the image, and the dot in the upper right represents areas of pure white.
We can move these points to control how light or dark the image appears. In our case we want to darken the image, so click on the dot in the top right corner of the grid that controls how light the image is and drag it straight down. As you drag down, your image in the document window becomes progressively darker. Keep dragging the point down until the output option at the bottom left of the dialog box shows a value of around 70:
Drag the white dot in the upper-right corner of the grid straight down to darken the image.
You can drag the white point even further down if you want to darken the image even more, and in fact at this point it’s better to make the image too dark because we can lighten it up slightly later, as we’ll see. I usually set my output level to around 70 to start. Finally, click OK to exit the dialog box. The photo now appears much darker than it originally was:
The image after darkening with Curves.
Step 3: Choose the Lasso tool
After darkening our image, we need to select the area where we want the light to appear. We don’t have to worry about precise, surgical selections, so Photoshop’s lasso tool works flawlessly. Grab the Lasso tool from the tool palette or press the letter L on your keyboard to select it with the keyboard shortcut:
Select the Lasso Tool.
Step 4: Draw a selection around the area you want to highlight
With the Lasso Tool selected, draw a rough selection around the area you want to highlight. In my case, I want the light to hit the woman’s face and maybe her shoulder as well, so I draw a selection like this:
Draw a rough selection around the area where you want the light to appear.
Notice how rough and jagged my selection looks, but that’s okay. We’re going to soften the edges of the selection in a moment.
Step 5: Fill the selection with black
If we look in our layers palette we can see that we now have two layers. The background layer that contains our photo is on the bottom, and our curves adjustment layer that we used to darken the image is on top. One of the great things about Photoshop’s adjustment layers is that each comes with its own built-in layer mask, and if we look closely we can see a white highlight border around the layer mask thumbnail:
The Layers palette with a white highlight border around the adjustment layer layer mask thumbnail.
This highlight border tells us that we currently have the layer mask selected and will be using the mask to hide the effects of the “Curves” adjustment layer in the area we just selected. To do this, we need to fill our selection with black. Go to the Edit menu at the top of the screen and choose Fill to bring up Photoshop’s Fill dialog box. When the dialog box appears, select Black from the drop-down box to the right of the word “Use”:
Choose Black in the Fill dialog box.
Click OK to exit the dialog and Photoshop will fill our selection with black. Looking again at our layer mask thumbnail in the Layers palette, we can see that it now shows a black area. This is the range that was in our selection:
The layer mask thumbnail now shows the area that we filled with black.
And if we look at our image in the document window, we can see that the darkening effect of the “Curves” adjustment layer has been hidden in our selection, revealing the original photo underneath:
The effects of the Curves adjustment layer are now hidden in our selection.
Press Ctrl+D (Win) / Cmd+D (Mac) to remove the selection border from the image.
Step 6: Apply Gaussian Blur Filter
To make the effect look more like light shining on the woman, we need to soften the edges of our selected area, which means we need to blur them, and for that we can use Photoshop’s Gaussian Blur filter. Go to the “Filter” menu at the top of the screen, select “Blur” and then “Gaussian Blur”. When the dialog box appears, drag the slider below to the right to increase the radius value. The higher the Radius value, the more blur is applied to the image. Keep an eye on your photo in the document window as you drag the slider to assess how much blur you need to create a realistic-looking, smooth transition between the light and dark areas. I’m going to set my Radius value to about 40 pixels. Depending on the image, you can set your value higher or lower. The best way to work is not to memorize numbers, but to judge for yourself which value suits your image best:
Blur the edges of the selected area by adjusting the Radius value in the Gaussian Blur dialog box.
Here is my image after applying the Gaussian blur filter:
The edges of the selected area now blend seamlessly into the surrounding darker area.
Step 7: Lower the Opacity of the Curves Adjustment Layer (Optional)
If you find that the curves adjustment layer’s darkening effect is too strong and makes the rest of the photo too dark around the highlighted area, simply lower the adjustment layer’s opacity to fine-tune the effect. The opacity option is in the top right corner of the layers palette. I’m going to lower my opacity to around 60%:
Decrease the opacity of the Curves adjustment layer.
And with that you are done! Here is my original image for comparison:
The original image.
And here, after lowering the opacity of my adjustment layer to create a much more subtle lighting effect, is my final result:
The final light effect result.
And there we have it! Visit our Photo Effects section for more Photoshop Effects tutorials!
How do I change the glare of light in a photo?
- Open Camera RAW Filter.
- Dehaze the Photo.
- Specify the Area.
- Start Removing the Flares.
- Change the Blend Mode.
- Eliminate the Color Cast.
- Darken Areas with the Curves Tool.
Making Photos That Look Like They Were Shot at Night
Have you taken a photo spoiled by a harsh light? Accidental glare can ruin even the best photos. Whether it’s sun glare, glare from glasses, or glare on the skin, we’ll show you how to remove glare from photos in minutes.
Way 1. Remove Sun Glare from Photo
Many amateur photographers try to take portraits with an attractive solar flare but fail. As a result, the harsh lighting creates an ugly glow that completely ruins the image. Follow the steps below to save your pictures and remove sun glare from photo.
We also recommend following the sun photography tips to prevent this situation in the future, or download the free Sun Glare PNG collection to add warm and natural solar flares in post-production.
1. Open the camera RAW filter
Duplicate the layer first using the Ctrl + J/Cmd + J keyboard shortcut to ensure your changes are non-destructive. Next, open the filter menu and select “Camera Raw Filter” or use the keyboard shortcut Shift+Ctrl+A/Shift+Cmd+A for faster access.
2. Decloud the photo
Drag the Remove Haze slider to the right to remove the haze caused by the glare.
3. Specify the area
Next we need to add a layer mask. Locate the New Mask button at the bottom of the Layers panel. It’s the third from the left. Once you click on it, a white thumbnail will appear next to your layer. Paint the non-glare areas with a brush so that the de-hazing does not affect the overall image.
4. Start removing the flares
Start removing glares with the Healing Brush tool. Depending on the photo, change the size and hardness of the brush.
5. Change the blending mode
Press Shift + Ctrl + N / Shift + Cmd + N to create an empty layer. Then change the Blending Mode to Color.
6. Eliminate the color cast
Remove the unwanted color cast from the glare with the brush tool. Just choose the color you want and start painting
7. Darken areas with the curve tool
Finally, use the Curves tool to darken the desired areas and completely remove sun glare from the photo.
Way 2. Remove Glare from Glasses
Flare and reflections are a common problem when taking photos with glasses. If we look at the photos with this accessory, the glare immediately catches our eye. It also distracts us from the topic as we can’t see her eyes very well.
1. Remove minor reflections
First duplicate the layer by using the shortcut Ctrl + J/Cmd + J. Next, use the Spot Healing Brush Tool and the Healing Brush Tool to remove small reflections and flares.
2. Create a Hue/Saturation adjustment layer
Click the New Adjustment Layer icon. It’s at the bottom of the Layers panel. Then press Hue/Saturation.
3. Match color to skin tone
Check the box next to Colorize. Then start dragging the sliders at the top to adjust the color to match the skin tone.
4. Invert the plane
Invert the adjustment layer with Ctrl+I/Cmd+I shortcut and use the brush tool to paint the glare away from the glasses.
5. Smooth the contour of the glare
The next step in learning how to remove glare from a photo is to create an empty layer. Use the keyboard shortcut Shift+Ctrl+N/Shift+Cmd+N. Next, use the Mixer Brush Tool to smooth out the contour of the glare.
6. Fill in the dark areas
Use the curve tool to fill in the dark areas. Now you know how to use these accessories to completely remove glare from the photo.
Way 3. Remove Glare from Faces
Have you ever had a model whose skin was too shiny? This problem is one of the biggest challenges in portrait retouching. We’ll show you how to quickly fix this error and remove glare from photos without spending hours editing portrait photos.
1. Eliminate glares with Healing Brush tool
Start removing glares with the Healing Brush tool.
2. Soften the rough edges
If you created rough edges, use the clone stamp tool to soften them.
3. Even out skin tone
In the nest, use the curves to balance the light and dark areas on the skin. This will fix uneven skin tone.
4. Smooth out the imperfections with the Mixer Brush Tool
Create an empty layer using the shortcut Shift + Ctrl + N / Shift + Cmd + N. To smooth out the remaining irregularities, use the Mixer Brush Tool with settings as shown in the image above.
5. Proceed to retouch the photo
In this way, you have successfully learned how to remove glare from a photo and laid the foundation for further retouching.
We have suggested several ways to remove glare in Photoshop, but there are many other cheaper programs that can also deal with this problem. For example, you can use GIMP, Luminar, PhotoWorks, or even mobile apps. If you want to learn more about alternatives, read this guide: https://photo-works.net/how-to-remove-glare-from-photo.php
How do I make it look like I took a picture?
First, take your screenshot. You probably already have this, but if not, just press the print screen key in Windows or cmd + shift + 3 on an OSX before pasting your chosen image into Photoshop. Hint: You can get a fuller screenshot by putting your browser into full-screen mode (F11 on most browsers).
Making Photos That Look Like They Were Shot at Night
A while back I was working in a design studio on a catalog that required screenshots of a website. The client wanted screenshots to look like photographs so that they matched the style of the existing images. We achieved this by actually photographing the site with a camera, but I couldn’t help but think there must be a better way!
After lots of experimentation I finally found the perfect way to make screenshots look like photos in Adobe Photoshop using techniques like perspective, pattern, blur and gradient overlays.
Let’s start! First take your screenshot. You probably already have this, but if you don’t, just press Print Screen on Windows or cmd + shift + 3 on an OSX before pasting the selected image into Photoshop.
Note: You can get a more complete screenshot by putting your browser in full screen mode (F11 in most browsers).
Let’s start by giving the image the screen feel. Remember that all of these steps are optional and you can mix and match them to get the effect you want
Create a new 2 x 2 pixel Photoshop document with a transparent background.
Use any tool to color either the top two or the bottom two pixels black. To do this, you have to zoom in directly. you could too
Click on Edit > Define pattern and name your pattern, for example “My great pattern”.
Return to your screenshot and create a new layer.
Select all by clicking Edit > Select All. Click on one of the selection tools and then right click (cmd + click on OSX) and choose Fill.
From the fill menu, select Pattern from the drop down menu and select your newly created pattern.
You can adjust the opacity of the layer to get the effect you want, or even try adjusting the angle of the pattern. When you are satisfied, merge both layers.
How do you take a picture with flash on Iphone?
When you open the Camera app, you see the default photo mode. Tap the Shutter button to take a photo. Then tap the arrow to adjust options, like flash, Live Photos, timer, and more. If you want to capture a QuickTake video, just press and hold the Shutter button .
Making Photos That Look Like They Were Shot at Night
Macro capture in Photo and Video modes is automatic – just move your iPhone close to the subject and the camera will automatically switch to the ultra-wide camera when it’s not selected, while maintaining your framing. To record macro slow-motion or time-lapse videos, select the ultra wide-angle camera (0.5x) and get close to the subject.
You may see the Camera app switch to the ultra-wide camera when you move your iPhone close to or away from a subject. You can control automatic macro switching by going to Settings > Camera and then turning on Macro Control. With macro control enabled, your camera app will display a macro button when your iPhone is within macro distance of a subject. Tap the macro button to turn off auto macro switching and tap it again to turn auto macro switching back on.
If you turn on macro control, automatic macro switching will be activated the next time you use the camera within macro distance. If you want to retain your macro control setting between camera sessions, go to Settings > Camera > Preserve Settings and enable macro control.
How to \”Add Flash\” Using Lightroom’s AI Masking | Master Your Craft
See some more details on the topic how to add flash to a photo already taken here:
How to make a photo look like it was taken with flash – Quora
First thing is by adjusting the exposure to make it brighter. Then adjust the highlight as well but not too much. You can now scale down the shadows to add …
Source: www.quora.com
Date Published: 12/28/2022
View: 9754
Best Photo Editor with Flash & Awesome FX Effects 4+
Add digital flash to your photos for free! Flash for Free is an application that allows you to brighten your photos to make up for your iPhone’s lack of camera …
Source: apps.apple.com
Date Published: 9/13/2021
View: 294
The Isolite Lets You Add Flash On or Off After the Picture Has …
With selective masking of each light source, difficult or impossible lighting control can be done with ease. Light can be animated after capture …
Source: www.thephoblographer.com
Date Published: 1/18/2021
View: 2736
Adding an Off-Camera Flash to Create a Winning Image
This image, titled “Star Gazers”, won Grand Prizes at the 2015 Shoot the Hills photo competition. Held in the Hocking Hi.
Source: digital-photography-school.com
Date Published: 4/4/2022
View: 6226
What post-processing tricks can be used to improve the quality …
Edited to add: Note that I’m asking about photos that I’ve already taken, so any preprocessing tips are not helpful to me. Additionally, I do …
Source: photo.stackexchange.com
Date Published: 8/27/2022
View: 6397
Flash photography on iPhone: When and how to use the flash
Most modern iPhone models use Night mode to shoot well-lit photos taken at night without using the flash, and we actually prefer night shots …
Source: backlightblog.com
Date Published: 10/19/2022
View: 1226
I tested apps that make your pics look like they’re taken on film …
The effect is subtle but convincing, adding a nostalgic hue that definitely would look good on the gram. 8/10 would use again. Prequel. Another …
Source: thetab.com
Date Published: 9/3/2022
View: 612
How to Turn On the Flash for Your iPhone Camera – MakeUseOf
Want to force your iPhone to use the flash while you’re taking a photo? All you need to do is hit the right toggle in the Camera app.
Source: www.makeuseof.com
Date Published: 7/19/2022
View: 3421
How to make a photo look like it was taken with flash
Something went wrong. Wait a moment and try again.
Try again
The Isolite Lets You Add Flash On or Off After the Picture Has Been Taken
The new Isolite promises to change the way flash photography has been done for years
“Whoa, whoa, whoa, whoa, whoa, whoa, whoa…” That’s essentially what I said when I first heard about Isolite, as I didn’t quite understand how it worked. But the new kickstarter, known as Isolite, is essentially an on-camera flash modifier that lets you fire off flashes in a photo and then decide whether or not to add them later. how do you ask How can you add a flash or its output after a picture is taken? And how does that really change the game for photo creation?
According to the company’s Kickstarter page, here’s how to use it:
Turn real lights on and off after the shot is taken.
Push, pull, paint light after the shot is taken.
Hard and soft light in one shot.
Adjust the exposure and ratio of each light source after the shot is taken.
By selectively masking each light source, difficult or impossible light control can be performed with ease.
Light can be animated after capture, turning still footage into full-motion video.
With our proprietary tools, online images can be brought to life with light
Pretty crazy, right? I’m not exactly sure how I feel about this as I personally use flash as a creative tool for lighting and usually have a creative vision that involves the use of that light. But this can do the same thing, sort of. It also makes it easier for you to work with.
Here is Isolite’s press release.
Making Photos That Look Like They Were Shot at Night
It can be difficult to create a photo that looks like it was taken at night. In this tutorial we’ll take a look at creating some images that look like they were taken at night but were actually taken outside during the day. The principles you will learn here can be applied in the studio or even outdoors at night to create a more convincing yet well-lit image.
“Shooting Day for Night” in the cinema
There is a technique that comes up again and again in the movies of the mid-20th century. It’s called “Shooting Day for Night”. When a film called for a night scene, the crew faced several challenges. Films of the time weren’t very fast, and early lenses didn’t have large apertures either. That meant night shots were out of the question.
To simulate the effect, the filmmakers shot during the day, but on tungsten-balanced film. This film had a built-in “white balance” adjusted for the orange tungsten indoor lighting. When used outdoors during the day, it produced a cool blue color on the images. You would also underexpose the scene.
We’re going to use some of these old school techniques during our photo shoot today. We shoot outside during the day, but we also use artificial light.
Shooting in the park
I met my model at a park for my shoot which meant I didn’t have easy access to power monlights. So I packed my Vivitar 285 flash and a light stand. You don’t actually need light modifiers for this shoot.
My model for the day was C.A. MacConnell, a local writer and former yoga teacher. I thought it might be fun to photograph some yoga poses and I might take some pictures that she could use for her author portrait.
When I checked the weather beforehand, it was supposed to be cloudy. That would have helped a lot. However, there was not a cloud in the sky all day. Someone really needs to speak to those meteorologists!
Overcome bright sunlight
The immediate challenge was to overcome the intense sunlight. It was early afternoon, so shooting outdoors was out of the question. If I had had a neutral density filter to drop the light down four or five stops it might have been possible. I chose to shoot in the shade.
I have selected two locations. One was under a shelter with interesting rock faces. The other was under a clump of trees.
A first test shot to determine the exposure of the background.
To overcome bright sunlight, I lowered my ISO to 100. This is the lowest setting my camera has. I set my shutter speed to 1/125 second. I was then able to underexpose the scene with my aperture. I initially set my aperture to f/22 but ended up fine tuning it to f/16. My flash was on full power to beat the ambient light. However, I let in some ambient light and illuminated the background.
Use direct strobe
I chose direct, unmodified flash for three reasons. I wanted hard or hard light to match the moon. I needed strong light to compete with the sun and I wanted my flash to put out as much light as possible.
hard light
First, and this may sound a bit silly, the moon is a very small source of light. The moon is also much lower in intensity than the sun, so it doesn’t reflect nearly as much in the surrounding area. The sun is a fairly small, hard light source, and the moon even more so. Other nighttime light sources are also harsh, such as streetlights. This is also why I chose to use a single light source instead of multiple flashes.
This was a test shot with my single flash. Remember that light doesn’t always have to be soft.
Powerful light
Second, I wanted to get the most performance out of my flash. That’s pretty easy. Any modifiers would have drained power from my little flash.
falling down
After all, I wanted to have as much waste as possible. The falloff occurs because the intensity of the light decreases as the distance from the light source increases. This happens faster when the light source is close to your subject. Light modifiers like umbrellas effectively increase the distance from your flash to the subject.
When we look around at night we are essentially looking at a scene with the shadows clipped. You could say that we see in “high contrast”. Smooth gradients and even color differences disappear, but through increasing falloff and harsh light, we mimic what our eyes see at night.
Create a small pool light
The small cone of light can be clearly seen in this picture. You can adjust the size of the pool by zooming your flash.
The next tactic for getting a scene that looks like it was shot at night is to create a small cone of light for your subject and then let the rest of the scene fall in shadow. This doesn’t happen in real life when viewing a scene at night. So this is more about providing visual cues that it’s dark.
We expect the subject and background of an image to be exposed relatively equally. When we see that the background is dark, almost completely black, we think it’s night.
Use your white balance to cool down your image
The last trick of the trade comes straight out of this old film technique. The last thought you can do to turn day into night is to change your white balance. You can do this in post-production, but I find it helpful to change the white balance on my camera while shooting. It helps me visualize the scene better.
This one features a cool yoga pose. I think this is the most intimidating and somber yoga photo I’ve ever seen.
I changed my white balance to 3300K. Old tungsten balanced film would have balanced closer to 2800K but I find it to be a bit too blue for this technique.
The final result
I didn’t spend too much time on composition and style in this tutorial, but I like the way this image turned out in that regard as well.
Here’s the shot I liked the most. I like the door in the background which seems to suggest hidden possibilities.
The pictures in the shade of the tree were interesting, but the sky looks pretty strange to me. The image would definitely look more convincing if it were cloudy
Here is the best picture under the tree. The sky just seems off but I like the rest of the shot.
Create your own moonlight photos
Now it’s time to create your images that look like they were taken under moonlight. If you’re not interested in fighting the sun, the same techniques apply to other locations as well.
Try it in the studio. Obviously there is no sun to compete with, which makes it easier. Just remember to isolate your subject in a cone of light and let the background go dark. The white balance trick works the same way. Try using a hard light source to complete the illusion.
You can also try it to improve the pictures you actually take at night. Add a small cone of light to really make your subject stand out. In that case you could try using an appropriate white balance for the situation and then add a blue gel to your flash. Finally, don’t forget that these principles were perfected in filmmaking, so they work for video too. The results will look great!
Give it a try and share your results in the comments below!
Related searches to how to add flash to a photo already taken
Information related to the topic how to add flash to a photo already taken
Here are the search results of the thread how to add flash to a photo already taken from Bing. You can read more if you want.
You have just come across an article on the topic how to add flash to a photo already taken. If you found this article useful, please share it. Thank you very much.
