Granite Cut To Size? The 165 New Answer

The Home Depot offers a range of services that customers can use to facilitate their construction and renovation projects. One of the most popular services is countertop cutting. Getting experts at the hardware store to cut countertops can save you time and money. So let’s take a close look at how you can get a countertop at the Home Depot.

Read on to learn everything you need to know about cutting countertops at Home Depot in 2022.

Will Home Depot cut countertops for customers in 2022?

Yes, Home Depot can cut and install countertops if customers purchase them from Home Depot. The Home Depot uses circular saws to cut laminate and granite countertops to size. Customers need to provide the specific dimensions they need to cut out space for sinks or stovetops. Plus, the Home Depot can cut countertops to fit any kitchen design. Ideally customers should have specific dimensions of the cut required. The cutting experts then use circular saws to cut worktops to the specified dimensions.

Please note that the Home Depot does not recommend cutting countertops without accurate measurements.

In addition, customers can buy or rent equipment for cutting countertops. Customers can use circular saws to cut out any shape, space, and size they need for specific spaces and designs.

Can you get pre-cut countertops at Home Depot?

Yes, the Home Depot sells a variety of uncut and precut countertops. Precut countertops are partially cut and can be pre-cut with holes for sink, faucet and hob. Precut countertops are much easier to install. However, they come in standard sizes, so they may not fit custom kitchen designs. Customers can browse Home Depot’s range of kitchen countertops here.

How to use the Home Depot countertop estimator for pre-cuts

Customers can use Home Depot’s pre-cut countertop estimator to find the right size for their specific home and kitchen design. The Countertop Calculator allows customers to choose every aspect of their new countertop.

Here is what customers can expect when choosing a pre-cut worktop using the worktop calculator:

Choose surface material. The first step is choosing a surface material such as granite, laminate, butcher block or stone. finalize design. Customers can place an order online once they have completed their kitchen design. Customers can also visit their local Home Depot location to speak with a design professional and then place their order online. Make sure you get the right fit. Home Depot professionals visit customers’ homes to ensure the correct fit. The design professionals can make changes to ensure the right fit as per the kitchen design. delivery and installation. The Home Depot offers free delivery and easy installation from a locally licensed and insured service provider.

Alternatively, customers can personally visit their local Home Depot location to purchase a pre-cut countertop. The Home Depot offers free delivery and easy installation for in-store purchases.

What Types of Countertops Does Home Depot Cut?

The Home Depot cuts countertops purchased through their kitchen design services. The Home Depot cuts laminate countertops purchased from a separate retailer. The Home Depot uses a third party to cut granite and marble countertops. Please note that the Home Depot does not cut butcher block countertops. The Home Depot does not install butcher block countertops through its kitchen design service.

Does Home Depot cut laminate countertops?

Yes, the Home Depot cuts laminate countertops purchased directly from its kitchen design service. A specialized installer cuts laminate worktops to the customer’s specifications. The Home Depot then supplies the cut laminate countertop as part of the kitchen installation service.

Does Home Depot cut granite countertops for you?

Yes, the Home Depot cuts granite countertops as part of its kitchen design service. However, the Home Depot doesn’t cut granite countertops in the shop. It uses a third-party service that specializes in cutting granite countertops. Please note that Home Depot will not cut granite countertops purchased from third party suppliers.

Does Home Depot cut wood countertops?

No, the Home Depot doesn’t cut wood countertops (like butcher blocks) because it doesn’t install wood countertops as part of its kitchen design service. While Home Depot sells wood countertops, it doesn’t install them. Customers need to consult a kitchen specialist or craftsman to cut the countertop to specific dimensions of the kitchen design.

Will Home Depot cut butcher block countertops?

No, the Home Depot does not cut butcher block countertops as they do not offer a wood countertop installation service. Customers must hire a kitchen installation service to cut butcher block countertops.

Does Home Depot cut quartz/marble countertops?

Yes, the Home Depot cuts quartz and marble countertops as part of its kitchen design services. Customers must provide the specific dimensions and measurements to ensure the correct cut. Please note that the Home Depot will not cut countertops purchased from third party suppliers.

How much does Home Depot charge for cutting countertops?

The Home Depot charges countertop cutting fees based on the complexity of the cut. Overall, customers can expect the following costs:

$20 for a single faucet cutout (about 1 3/8 inch diameter holes).

$25 per socket (standard size) on a backsplash.

Just over $100 for a cooktop. The final price depends on the size of the hob.

What other countertop services do you get at Home Depot?

The Home Depot offers full countertop services through its kitchen design center. Customers can visit their local Home Depot store to speak with a kitchen design specialist. Customers can view worktop surfaces, provide measurements and pay in store or online.

Here’s a breakdown of the countertop services customers can expect from Home Depot:

Consultation . Customers can speak to a kitchen design expert at their local Home Depot store for free.

material selection . Customers can choose granite, laminate, marble, quartz, or laminate finishes for their countertops.

Cut . The Home Depot cuts countertops to specific dimensions and kitchen designs. In addition, the cuts include faucet, stovetop, and socket holes. Customers can expect to pay just over $100 for a stovetop cutout, $20 for a single faucet, and $25 for outlets.

Delivery . The Home Depot offers free delivery on countertops.

installation . The Home Depot offers countertop installation services. Average costs range from $24 to $27 per square foot.

estimator . Customers can use the Countertop Estimator to find the estimated cost of their overall project.

Please note that the Home Depot will not cut or install countertops purchased from third party suppliers.

Home Depot customers can purchase countertop cutting tools. Here is a list of tools that customers can use to complete a countertop cutting and installing project:

Alternatively, customers can visit their local Home Depot location to speak with a specialized representative and choose the best tool for their needs and budget.

Where else but Home Depot can you have countertops cut to size?

There are several countertop cutting alternatives in the United States. Here is a list of the most popular places to cut countertops:

lowes Lowe’s offers a kitchen design service similar to that of Home Depot’s.

IKEA. Ikea offers a variety of worktops. Custom worktops can only be ordered online.

Alternatively, local contractors or craftsmen can offer kitchen design services for worktop cutting and installation.

Conclusion

If you are looking for kitchen countertop services, the Home Depot is the place to be. The Home Depot offers countertop cutting services when countertops are purchased direct from them. Alternatively, Lowe’s offers similar kitchen services. Ikea can cut wooden countertops like butcher blocks. Finally, a do-it-yourself project is a possibility when purchasing tools like a circular saw.

If you’re looking to remodel your kitchen with new countertops – either to enhance the beauty of the space or increase the resale value of your home – granite and quartz are probably high on your list of possible materials. Sleek and premium, both are favored by homeowners for their timeless elegance and rugged durability, but their differences are more than skin deep. Read on to see how these two popular countertop materials compete, granite vs. quartz. The key comparisons below can help you choose the model that best suits your style, budget and needs.

Granite is 100 percent natural.

Granite is a natural rock composed of quartz, feldspar and mica, formed deep beneath the earth’s surface over millions of years. It is extracted from quarries as large stones which are then cut into slabs for home design applications. The quartz used for countertops, on the other hand, is an engineered stone composed of 90 to 94 percent naturally occurring ground quartz and an additional 6 to 10 percent polymer resins and pigments. Although the ground quartz component is quarried directly from the earth, it must be bound with artificial resins to form quartz slabs. Because these resins contain chemicals that can emit pollutants known as volatile organic compounds (VOCs), people who want optimal indoor air quality will be more comfortable with granite that does not emit VOCs.

Connect with a countertop expert Find licensed kitchen and bath specialists in your home and get free, no-obligation estimates for your project. Find Local Pros +

Granite offers more visual variety.

Both granite and quartz countertops are available in a variety of hues and patterns to suit your kitchen’s unique color palette. However, the interlocking minerals of white feldspar, gray quartz and black mica in granite give granite countertops natural streaks and whorls that vary in shape and size from one point on the slab to another, resulting in a visually varied look. Quartz does not naturally contain these variations; it looks mottled rather than veined and maintains a consistent pattern across the slab without much variation – a plus if you want a uniform looking countertop. Quartz’s lighter patina also hides seams (gaps between adjacent slabs on the countertop) more effectively than granite, whose darker patina (due to its mica component) makes seams more noticeable. What you choose will depend on what else is going on in your kitchen. For example, if you have a simple backsplash and color, you might want a granite countertop as the focal point. However, if you’re inclined towards other patterns and textures, a more minimalist quartz might be the perfect complement.

Granite has an earthy texture.

The mineral crystals in granite, which often bear microscopic fissures (small raised lines of distinct color), give it a slightly coarser, earthier texture than quartz. If you are looking for a kitchen with a “back to nature” quality, granite is a good choice. Because quartz is bound with resin, it doesn’t have the crystalline structure or natural cracking of granite, giving it a smoother texture. The finer the quartz is ground, the shinier and more polished the overall look.

advertisement

Quartz is generally less expensive.

The cost of a granite or quartz countertop depends on the thickness of the slab, the color, the edge profile (e.g. square, rounded or bevelled) and whether or not the countertop can accommodate a sink. But with the exception of the cheapest granite, quartz is generally cheaper – $70 to $100 per installed square foot compared to granite’s price range of $60 to $270 per installed square foot. For an average sized kitchen with 30 square feet of countertop space, a quartz countertop would cost $2,100 to $3,000 versus $1,800 to $8,100 for a granite countertop. This cost differential is due to the months or even years it can take to locate and quarry granite, as well as the higher costs associated with transporting granite from Brazil, Russia and India, where most of the world’s offer is located. Quartz is more common and often mined in the United States (mainly in Arkansas) – and the savings are passed on to you.

Quartz is more resistant to moisture and stains.

Both quartz and granite are resistant to heat, scratches and moderate impact, not to mention they are truly rock hard – at an impressive 7 out of 10 on the Mohs mineral hardness scale. However, because quartz is non-porous and water-resistant, it doesn’t require a sealant to be virtually stain-resistant. Granite has a porous surface that will absorb spilled food and will stain easily unless treated with a water and oil repellent finish. It is recommended that granite be sealed at the time of installation and once a year thereafter. This DIY-friendly job consists of spraying the entire countertop with a no- or low-VOC granite sealer (available for $7 to $15 at home improvement centers), letting the sealer sit for 20 minutes, and buffing any wet spots with a soft cloth , wipe with a dry cloth , and then allow the countertop to dry for 48 hours.

advertisement

RELATED: 10 ways you accidentally ruin your countertops

Note: Both materials are not suitable for outdoor kitchens as direct UV rays from the sun can discolour them.

Quartz is less of a bacteria magnet.

If left unsealed, a porous granite countertop can quickly become infected with bacteria, mold and mildew – the last things you want in your kitchen! – if you are very conscientious when cleaning. A sealed granite countertop prevents germs from entering the surface, but as the seal gradually degrades over time, germs will re-enter. The non-porous surface of quartz prevents germs from entering the surface without a seal. However, you can keep both types of countertops hygienic by cleaning them daily with either a commercial stone cleaner or a homemade cleaner suitable for granite or quartz. Spray the entire countertop then wipe down with a microfiber cloth or soft sponge (preferably while any spills are still damp) then wipe off any remaining cleaner before it dries to avoid white streaks.

Quartz plates cover more surface.

The average granite slab, measuring 105 x 54 inches, is narrower and shorter than a standard 120 x 55 inch quartz slab or a 129 x 65 inch jumbo quartz slab. While this might make handling granite slabs a bit easier for plumbers, you need more slabs to cover the same area, and more slabs equals unsightly seams. Wider and taller quartz slabs allow you to cover small and large work surfaces with fewer slabs. Both granite and quartz slabs are available in widths from 0.75 to 1.25 inches.

None of the materials are DIY friendly.

Due to the heavy weight of the slabs, do-it-yourself installation is not recommended for either granite or quartz. Both weigh about 19 pounds per square foot, or 570 pounds for a 30 square foot countertop – the weight of two refrigerators!

Thermal shock occurs when a material is subjected to a drastic change in temperature over a short period of time. If you’ve ever broken a hot coffee pot by holding it under cold water, you’ve experienced thermal shock.

Thermal shock is extremely rare with granite countertops. The typical home cook/cook would not subject their countertops to temperatures that would crack granite.

A thermal shock can be exacerbated when the temperature variation is uneven throughout the material. If a material cools or heats up too quickly, tensile stresses develop between the surface and the inner layers. Depending on the chemical composition and bonds of a particular material, the tension between the layers forces the chemical bonds to break.

Granite countertops can be cut in place if the professional uses the right tools and follows the right procedures

Receive offers from up to 3 professionals! Enter a zip code below and get matched with top professionals in your area. find pros

Granite is a fabulous addition to your kitchen that adds value and luxury, but it’s not the easiest material to work with. If you need to change your kitchen layout or upgrade your appliances, you may find that granite countertops are no longer the right fit. Perhaps you are installing a larger sink, for example, or the newly ordered appliances are larger than the old ones. Rather than having new granite countertops installed or the old ones removed to resize, hiring a local countertop installer allows you to cut the granite countertops in place.

Can you cut granite countertops yourself?

Theoretically you could cut granite countertops yourself if you have the right tools, knowledge and skills. However, it is best to leave it to professional countertop installers. If you are planning to trim your granite countertops to avoid the expense of a complete kitchen remodel, you are already saving quite a bit, so the additional savings you would get from doing the work isn’t that significant.

Then, of course, there is the time and energy required and the cost of renting tools.

And if you get it wrong, the mistake becomes extraordinarily costly because if you break the granite, cut away too much, or otherwise damage the countertop beyond repair, you’ll have to pay for a replacement plus the cost of installation.

Then there is a significant risk that you or your family will inhale silica dust from the cutting process if you don’t take all the right precautions or clean up properly afterwards.

All in all, it is wiser to leave granite countertop modification to the professionals.

The Risks of Cutting Granite Countertops in Place

Grace Cary / Moment via Getty Images

The risks of cutting granite countertops fall into two categories: financial concerns and health risks.

Monetary Concerns

If you cut away too much granite you will have to find bigger appliances to fill in the gaps or it will ruin the look of your kitchen. If you cut away so much of the countertop that only a thin or narrow piece remains between the edge of the cut and the wall or edge of the countertop, the granite can crack easily and not support the weight of a sink or the appliance, that you install in the room.

Cracks and breaks can also occur if you leave the inside corners square rather than curved. Instead, to avoid breakage and costly replacements, all inside corners should be rounded to relieve the stone. Also, all edges should be beveled (or rounded) to ensure there are no sharp spots. In any of these situations, you’ll likely need to purchase a replacement. The cost of a granite countertop ranges from $40 to $100 per square foot for materials and $35 to $85 per hour for labor.

Related Article Marble or Granite? How to choose the right stone for your home Granite and marble are both natural stones and are popular choices for beautiful, durable countertops that buyers love to see in a kitchen or bathroom

health concerns

One of the biggest risks when cutting granite and other stones is inhaling silica dust. Respirable crystalline silica particles are produced when stone such as granite is cut, polished. And if inhaled, it can have long-term and often fatal consequences. Silica dust is most notorious for causing silicosis, a disease that can quickly become debilitating and lead to long-term disability and even death.

Silicosis is incurable and can cause the lungs to stiffen and scar tissue to form, making breathing painful and difficult, which can affect lung function. OSHA also advises that silicosis weakens the immune system and can put the patient at risk of lung infection.

Aside from silicosis, inhaling silica dust can cause end-stage lung cancer, chronic obstructive pulmonary disease, and kidney disease.

What to expect from your granite countertop technician

Once the big day arrives, the pro marks the cuts — whether they’re cutting granite to mount a larger sink or new appliances — and erects a dust control tent around the area, sealing the top and bottom to the floor and ceiling to prevent this from escaping and penetrating your home. You will wear PPE including a filtered mask for respiratory protection. Then they use an angle grinder or circular saw to cut off the excess granite.

Once the cutting is complete, the contractor rounds the inside corners and almost all exposed edges for strength and security. They will then clear away all the dust and clean the area.

Depending on the scope of the order, the contractor can also position any devices in their new positions.

Avoid spending a lot of money on the wrong blade.

What you should know before buying diamond blades

If you work in construction, you most likely own a diamond blade or two. Cutting through hard materials like concrete, asphalt, tile, brick, and stone can be a challenge, especially if you’re not using the right blade. It can be a bit overwhelming trying to figure out which diamond blade to choose with all the options available.

There are four basic questions you should always ask yourself before choosing a diamond blade for your next project:

what are you cutting

The type of material you want to cut will determine what type of binding you need to look for. Bonds are the mix of metals that hold the diamonds together and secure them to the blade. Different bonds have different wear rates depending on the density. Most bindings are labeled soft, medium, or hard. If you are cutting very dense concrete, a softer bond is best. It seems counterintuitive, but you want the bindings to wear out faster when cutting hard materials. This is because more diamonds are buried in the compound material beneath the surface of a new blade, and as the blade wears, more fresh diamonds are exposed. The diamonds on a blade will either wear out, break, or be ripped off the blade. It depends on the right clothes. If you’re cutting brick or asphalt, you’ll need a blade with a harder bond. The diamonds stay cooler when cutting softer materials, which helps them maintain their integrity.

When choosing a blade and determining the hardness of the bindings used, remember that it is not always indicated on the packaging. Typically, the packaging of a blade makes it clear what the blade is intended for. When a blade is made for cutting concrete, the box says concrete and shows a picture of concrete. It’s also important to remember that bond strengths are listed differently by manufacturer.

Bond strengths can be specified in numbers of 10, 20, 30, 40, 50 or 1000, 2000, 3000, 4000, 5000 – it just depends on who is making them. Some companies even label bond hardness by color. Remember, the lower the number, the softer the bond, and the higher the number, the harder the bond.

What kind of saw are you using?

Every saw spins at a different RPM, and most saw blades are designed to spin at a specific RPM. Installing a mismatched blade on your grinder or saw will result in inefficient cutting and can even result in serious injury. The blade packaging should indicate the proper RPM range of the blade.

Is it a wet or dry saw?

Years ago most diamond cutting discs required a continuous supply of water to keep them cool. That’s because the diamonds were silver mounted and couldn’t withstand the heat. The diamonds of modern blades are laser welded and can handle the heat better. But just because a blade is sold as a “dry blade” doesn’t mean it won’t cut faster and last longer if you cool it with water.

Which saw blade diameter is required?

Diamond cutting discs come in many different sizes. The most common sizes are between 4 and 16 inches. Always use the size recommended by the tool manufacturer.

Types of Diamond Blades

Segmented Blades

These are the most popular blades for general use and typically have a medium to hard bond. Segmented blades are perfect for dry cutting as the segmentation helps keep them cool. Segmented blades are commonly used to cut paving stones, concrete and asphalt.

Serrated (Turbo)

The serrated edges of these blades push debris out of the way, allowing them to make fast, smooth cuts. Serrated turbo blades can be used in wet and dry applications. With the soft to medium bonds, this blade works well for cutting tile, natural stone, marble and granite.

Continuous blades

These are the cleanest cutting blades, making them ideal for trimming finished edges. These blades cut the slowest and require water to keep them cool. With their softer bond, they are best suited for cutting hard material such as ceramic tile and porcelain.

WHY MOST OF THE CASES YOUR GRANITE OR QUARTZ COUNTERTOPS HAVE STEAMING

Many customers ask us if there will be seams in their countertops, usually after a clerk at one of the major retailers has told them there will be no seams or they won’t see them. Unfortunately, in most cases this is wrong when installing for larger kitchen or bar countertops. One reason is that natural stone is quarried and cut into 10-foot blocks. Another reason is that when cut for sinks or stoves, the stone becomes fragile and can break apart. In this blog you will learn more about why there are or must be seams and how there are just no seams.

WHAT IS A SUIT?

A seam is a transition between two stone countertops.

The reasons you may need one or more sutures are:

A section of countertop may be longer than the slab of stone from which the slab is cut.

If you have a change of direction in your countertops, “L” or “U” shaped kitchens are good

examples

If you have a long or large countertop that cannot be brought into your kitchen in one piece due to access issues.

If you have a fragile granite with a cut out for a sink or hob. Some natural stone countertops are inherently weak due to veining. Transport loads may have to be taken into account.

SEAMS ARE NEVER INVISIBLE

It is important to understand that seams in granite or quartz countertops are never invisible. Unfortunately, some of the big box and warehouse houses make false promises and tell the customer

The seam will be invisible. That only raises impossible expectations.

HOW BIG OR SMALL A TYPICAL SEAM SHOULD BE

A proper seam is no wider than 1/16 inch and is flat and even for the entire length of the seam. You will feel a small change in surface texture over the seam. You shouldn’t feel any difference in the height of the stone from one side of the seam to the other. There should be no seam over a dishwasher or other unsupported part of the countertop.

Sample of the worst seam we’ve come across courtesy of one of our competitors. Replaced and repaired old stone countertops.

BEST POSITION TO COVER SEAMS

Hobs are actually good spots for seams as the seam length is quite small and less noticeable. The seams are bonded with color matched epoxy, the technician will match the color on site to achieve the best possible match. For countertop stones with many color variations, the technician selects the best average color.

COUNTERTOPS WITH VEINS

Countertop materials with large, bold or contrasting veins can present more of a challenge at seams. It is seldom possible to perfectly align the veins in your stone with the seam and should be considered when selecting the stone. If a kitchen is going to have a few veins where the countertop changes direction, then a less directional pattern should be considered. Overall, don’t worry too much about the seams, but don’t expect them to be completely invisible either. If you choose a stone with an eye-catching stone pattern, we’ll consider your stitching and make recommendations that we think are helpful.

ONLY WAY TO HAVE NO SEAMS IN STONE COUNTERTOPS

As you have read on this blog, it is not typical for your granite or quartz countertops to have no seams. Exceptions are smaller slabs for desks, smaller bars or possibly sinks. If the cut can be done in a smaller than 10 foot slab, you can have stone countertops without seams. If you need to install a sink or stove or have more kitchen space; There is nothing you can do to prevent seams. However, you can hire the best contractor to ensure seams are minimized and blended as best as possible. Below is another example of a seam that blends well and is only really noticeable up close.

Should I choose granite or quartz?

It really depends on your home and market as we have written here before. However, quartz is becoming increasingly popular because it can be customized to match your color scheme. For the best US-made quartz, check out Cabria. Granite is a little less expensive and has amazing colors and patterns due to its shape. The disadvantage of granite for larger countertops is that there is enough stone to fit in your kitchen or living area. You should make your decision based on your budget, but also on how you want the space to flow together.

Granite is an elegant material that is a valuable addition to any kitchen. Crafted from volcanic material found beneath the earth’s surface, the magic of time has gifted granite with intricate patterns and designs, and sometimes sparkles. This makes them a preferred choice for high quality kitchen and bathroom worktops.

Granite slabs are cut to size and the right size is crucial. Here are a few steps you can take to ensure you’re measuring your countertops correctly.

What you need before measuring

Measuring can be intimidating for a non-mathematician. However, it is extremely important as granite countertops are usually one-off pieces cut to size. The right measurement also gives you a very good idea of ​​the costs, especially if you are working on a tight budget.

A simple tape measure and the right measuring strategy along with some attention to detail is all you need to properly measure your countertops that are to be covered in granite slabs. It involves a bit of math. But all the calculations are easy enough to do with a basic calculator so you don’t have to worry.

How to measure for granite countertops

The main goal of measuring is to find out the total area of ​​your countertops, islands and backsplashes. Knowing the total area in square meters will tell you how much stone to order and give you an estimate of the cost. Here are the simple steps to get started:

Step 1:

Using your tape measure, measure the length and width of the entire surface you wish to cover with granite in inches.

Step 2:

Multiply the length by the width. This will give you the total area in inches.

Step 3:

Divide the total area in inches by 144 to get the area in square feet. This conversion is important because most contractors and suppliers communicate in square feet.

For example, the length of your countertop is 100 inches. Multiply it by the width, which is usually around 26 inches (most closet boxes measure 24 inches). The extra inches allow for countertop overhang). 100 x 26 = 2,600 in square inches. 2,600 / 144 = 18,056 square feet.

Step 4:

Measure for the backsplash. This is done by multiplying the length of the countertop by 4 inches, which is the standard backsplash height. Divide the product again by 144 to get the area in square feet.

Step 5:

Repeat steps 1 through 3 for all countertops, islands, and other surfaces you wish to cover with granite.

We measure as accurately as possible, like on this Black Galaxy and Giallo Rio granite kitchen. Just look

Measuring other shapes of countertops

While there are many countertops that are rectangular in shape, there is a plethora of other shapes and styles. These could be intimidating to measure. But don’t look for your old geometry textbooks just yet. There is actually a way to measure shapes that aren’t simply rectangular without having to do too much math.

A simple rule of thumb when measuring non-rectangular countertops is to divide them into boxes. Take an L-shaped countertop, for example. You can divide into two rectangular fields. Once you’re done, all you have to do is measure the length and width of each box and then add them up. The result is the total square area of ​​the L-shaped surface. Remember that to convert the area from inches to square feet, all you have to do is divide by 144.

Countertops with curved edges can also be measured using this method. Simply measure the length starting from the flat end to the extreme point of the curve or apex. Multiply that number by the width, then divide by 144 to get the estimated total squares.

Important considerations when measuring for granite countertops

Choosing granite as a surface for your countertops is an investment. More often than not, you pay a premium price for this material. In the long run, however, it pays off, because granite upgrades your kitchen and the property as a whole. There are a few things to consider when taking measurements on your granite countertops.

First, granite is made of natural stone. A very hard and dense material. Once cut, there is no turning back. Every decision about Granite is final.

Next overhang. An overhang is a portion of the countertop edge that extends beyond the base. This allows for a wider countertop range without having to modify the base. It also adds aesthetic value. Too much overhang creates larger areas of stone hanging unsupported. These areas cannot support too much weight and are prone to chipping and breaking.

Finally, when measuring countertop surfaces, you should always keep the overall floor plan in mind. Where you place your refrigerator or gas range, counter space may be limited.

Conclusion

There’s a reason a cliché is a cliché. Because it works. And in the building world, “measure twice and cut once” has been proven time and time again by professionals and DIYers alike. It is extremely important for granite because the material is hard and dense that once cut there is no turning back.

Proper measurement also gives you a very clear view of the cost. This is very important when the project is on a tight budget.

For any professional help in advice, supplies and services, Granite Selection is an expert in the field of natural stones. From measurement to design to service and delivery, we are the top provider in the Chicagoland area. Call us at (888) 906-3317 and we’ll be happy to help. We are located in Elk Grove Village, Illinois and will serve the surrounding 70 mile area.

The short answer to how thin marble and granite can be cut is 0.3mm thickness. Many people in the natural stone industry may insist that 1cm tiles are the thinnest. And they’re right about the intended application for the construction industry. Even the machines commonly used to process natural stone can only cut them into 1 cm thick tiles.

0.3mm thick marble dial cutouts

When we think of natural stones, most people think of furniture or construction industry companies as stone experts. We often forget that jewelry manufacturers are even more precise and specialized in natural stones than the construction industry. Take David Yurman, for example, who has been making luxury jewelry since the 80’s and has a beautiful collection of designs that incorporate natural stones into his products.

We have personally met many “experts” who immediately dismiss that 1mm thick stone is not possible or that it is not natural stone. The technology in question isn’t actually new, it’s just new to certain industries. We live in a world that has the technology of robotics, machine automation and artificial intelligence. Is it really that hard to believe that natural stones can be cut as thin as 0.3mm?

Then there is the next hurdle of thin marble formation. When people finally believe that it’s really natural stone, they think it must be very fragile.

We always use the example of glass and how fragile it is. It’s even more fragile than marble, but most people can accept that the technology to make bulletproof glass is possible.

It is possible to process natural stones very thinly and reinforce their strength so that their application can become a reality. What would be the purpose of cutting the stone so thin if you can’t use it? 😊

So let’s dive in and show you the applications of thin marble stone products.

We hope that a designer or someone with a beautiful imagination and creativity can take this thin stone technology to new heights and applications after reading this blog post.

watch

Nero Marquina marble is an essential part of a classic collection, which is why we decided to use it for our first minimalist watch. The slim timepiece is perfect for any occasion. With an immaculately round and simple marble dial paired with a luxurious leather strap and elegant rose gold case, you have a watch that demonstrates this perfection in engineering. When you make a dream come true! The stone dial used in this minimalist watch was only 0.3mm thick.

CASE SIZE 38mm

CASE THICKNESS 6.75mm

BAND WIDTH 18 mm

MOVEMENT Battery powered 2 hand Miyota quartz

GLASS Hardened mineral glass

WATER RESISTANCE

Stainless steel

Dog Tag Necklace

The dog tag chain has a beautiful stainless steel border with a laser cut marble insert 0.5mm thick. Necklaces with dog tags have become a popular accessory. And adding a stone that is unique to that person gives it even more character. Since it is natural stone, each piece will always be different. And there is also the option to personalize a name or design on the marble.

Signature iPhone case and wireless charging pad

Although our company has been making stone for 50 years, the retail brand has only been around since 2015. The only reason we chose a marble iPhone case is because we can show that it’s possible to make marble so thin and durable for someone to wear and use every day.

The marble wireless charger was the perfect complement to the marble iPhone case. The round, flat marble design functioned as the perfect home accessory that also functioned as a tech accessory.

Marble business cards, poker cards and notebooks

It was not enough to make products from real marble, as many people still had doubts about whether it is real marble or whether the stone is so thin. We wanted to prove our processing capability even further. We introduced the world’s first real marble business cards, poker cards and notebooks. These lifestyle products are made entirely of 1mm thick marble stone.

Although notebooks seem to be a thing of the past, you’d be surprised how many people still enjoy jotting down their notes in a notebook. In addition, there are a significant amount of mental health benefits of writing. Finally, there is some correlation between marble and weight. But cutting natural stones that thin reduces the weight significantly. Metal is also a heavy object, and yes, metal credit cards do have some weight. However, you don’t really hear people complain about how heavy a metal credit card is? On the contrary, the little extra weight compared to plastic credit cards gives it a “luxury touch”, don’t you think?

When we created these marble lifestyle products we knew there would be many questions and doubts surrounding fragility. So we really wanted people to test the marble and see for themselves. In this case, seeing is believing.

Here’s a video from Wuwulives showing these business cards can be dropped or thrown around without worrying about damaging the cards. Now if you take a hammer or force it to bend, that’s a different story. Like everything in this world, there is a breaking point with most products. Paper business cards can be torn, but you see people testing the quality of paper business cards by tearing them up. Our point is that it’s durable enough to carry around and use on a daily basis without worrying about damaging the product unintentionally.

cigar bag

The marble cigar case was the passion of the founder. It started out as something he wanted for himself. As a cigar lover, he wanted a bag that was different than what is available on the market. The design has been designed to be functional and versatile, with the inside pockets being able to be moved using magnets. You can overload the bag with cigars and accessories, or remove some of the bags if you find them too bulky. The zipper has an odor proof seal to protect your cigars from contamination.

For the exterior of the bag, a signature handpicked piece of marble will definitely be the only cigar organizer on the market. The purpose was also to demonstrate the ability to fuse leather and marble together, combining two amazing materials in one bag. Something never done before!

Construction & Furniture

With 1cm or 1.2cm large format tiles are very impressive in the natural stone industry. Many companies promote 1cm as ultra thin compared to 2cm thick board for easier handling, cost saving, green building material, etc.

But we decided it was still too heavy and thick to work with. Although we can produce ultra-thin sheets. The perfect thickness is 2mm thick marble and granite slabs to work with. And we use MIKOLITE marble slabs in several areas:

yachts

cruises

airplane

mobile homes

elevators

consumer electronics

cars

office supplies

wedding gifts

Any application where weight capacity is an issue

applications

wall panels

Countertops & Vanities

save signage

shower walls / ceilings

Fast processing of projects

Column finish/wall paneling (veneer)

balcony panels

corridors

furniture

Much more

The beauty of natural stones like granite, marble, limestone, travertine and onyx in lightweight construction applications is that you can turn any of these natural stones into MIKOLITE thin slabs. We have even made ultra-thin terrazzo slabs and engineered marble. There are many finishes to choose from as you would with traditional stone slabs. There are polished, flamed, ground, sandblasted surfaces, mosaic designs or laser engravings. Lighter and thinner means easier to work with and quicker to install. No new tools are required for processing MIKOLITE thin boards either. Thin marble slab technology is here to make your life easier and less stressful. Trust us, if you’ve ever worked with natural stone or undertaken a renovation project, you know how tiring it can be.

I hope this answers your question about how thin marble can be cut and laid safely. And who knows how much more technology may bring us. Even in a traditional industry such as the natural stone and construction industry. We’d appreciate comments, suggestions, and shares to let more people know this is available. Mikolite ultra thin marble slabs will be the natural stone Zillow or Opendoor as these companies have done in the real estate market.

Leave a comment

Comments are approved before they are displayed.

Highlights Yes, it is technically possible to re-cut granite to make room for a larger sink.

Some contractors will enlarge the sink cutout with your granite.

Others insist on transporting your granite to a shop where a milling machine can do the job.

The lack of support under installed granite countertops increases the risk of the stone breaking during the cut.

Receive offers from up to 3 professionals! Enter a zip code below and get matched with top professionals in your area. find pros

Do you get a sinking sense of regret because you chose too small a sink style for your kitchen? It is possible to enlarge the cut-out in an existing granite worktop for a slightly larger undermount sink. However, cutting a granite countertop comes with risks. Before you pull the lever for an increased sink area, make sure you know what you need from a contractor.

Know the risks of cutting granite after installation

While enlarging your sink cutout is technically possible, it’s important to decide if your dislike of your current sink is worth the risk that comes with this project. There is always a risk of damaging or degrading your granite if you modify it after installation.

No contractor can guarantee that your slab won’t crack when they cut into your granite. That’s because a natural material like granite is prone to cracks, which can crack under stress, even if they aren’t visible.

There are two methods for enlarging the sink opening in a granite countertop

Not all contractors will approach this job in the same way. While some are confident in cutting your sink area right where it is, others recommend temporarily removing your granite to make the adjustment. So be prepared to hear that your granite may need to be taken elsewhere to get this job done.

Cutting granite for a larger sink in your home

Photo: Bill Oxford/E+/Getty Images

If you hire a professional to cut granite on site, they will likely use either diamond wheels or laser cutters to slowly cut a new template for your larger sink. Be warned that the process can create a lot of dust in your home.

Modifications that don’t require moving the granite are often cheaper than workshop modifications simply because you’re not paying for the time and labor to remove, transport, and reinstall your countertop. A local countertop repair professional can advise you on whether or not it is possible to cut your granite on site.

Related Article When Hiring for Granite Countertop Modifications Igneous rock calls for an ingenious contractor

Cutting granite for a larger sink in the shop

Some contractors insist on modifying your granite at their shop rather than at your home. Giving a granite slab the right support while cutting reduces the chances of the granite cracking. Many contractors believe the best way to cut granite is to remove it from your kitchen and take it to a shop where it can be fully secured and supported for the cleanest cut possible.

The other benefit of having granite brought into a shop is that a contractor can use a powerful and precise shop milling machine, while cutting installed granite requires hand tools.

Yes, it is possible to remove granite slabs once laid. Professionals must carefully remove them whole to avoid damage. It’s understandable if you, the homeowner, hold your breath at this very painstaking process, especially since granite countertops cost an average of $2,000 to $4,500.

Related Article 7 Benefits of Granite Countertops for Your Home Granite countertops offer many benefits beyond their natural beauty

Determine if you have room for a larger sink

The position of the outlet pipe from the siphon that goes into the wall plays a big part in determining if you have enough space for a larger undermount kitchen sink. If your new sink is deeper than the drainpipe, the waste water will not drain properly. In this case you need to have a pro-cut and lower the exit pipe to make room.

Is Regrooving Granite for a Larger Sink Expensive?

Drilling a hole in granite is not complicated if you have the right tools. However, drilling a hole in granite is not only time-consuming with the right tools, but also time-consuming. Hence, it is always advisable to outsource it to professionals with the right tools and expertise.

The cost of drilling a hole in granite can range from $200 to over $500. However, the actual cost will depend on the size of the hole you intend to drill. The thickness of the granite can also affect the overall cost. Different professionals would charge different fees for drilling a hole in granite, depending on how demanding the job is.

In this article, I’ll tell you why it’s better to have professional granite drill holes for you. I will also explain various questions you might have on this topic. Read on to find your answers.

Why you should hire professionals to drill a hole in granite

When handling some technical and demanding projects in your home, it is always best to outsource it to the right professional.

Drilling a hole in granite is not that complicated. But that can only be done with the right tools, and the tools for drilling holes in granite are very expensive.

You can spend up to $1,000 or more to purchase the drilling tool and bits for drilling holes in granite.

Once the granite is ready for installation or already installed, holes must be drilled for the sink and plumbing.

The tools you will need to cut the panel are a diamond saw blade, a diamond hole saw and a diamond drill bit.

Diamond-coated bits and blades ensure highly precise and clean cuts.

Using the wrong tools will make the job difficult for the user and potentially damage the granite. So it’s important to use the right tools if you want a precise and clean cut.

A granite countertop in your bathroom or kitchen would greatly improve the aesthetics of your space.

Not only does this material look great, but it doesn’t chip or scratch easily, making it an excellent option for high-traffic areas.

If you are doing a DIY project that uses granite, or you have determined that a hole is needed in your granite, consider hiring a professional to do the drilling for you.

Here are some reasons why you should trust professionals to drill a hole in your granite:

1. You have the right tools

One of the main reasons you need the right professionals for this job is that they always have the right tools.

Depending on the type of hole you want to drill, you may need more than one tool.

For a simple home project, investing in these expensive tools may not be ideal. Therefore, you should always outsource to professionals.

Professionals use tools such as drill bits, filing tools, saws, belt sanders, scouting tools and more to install granite and drill holes.

Using the wrong tools can also leave cracks in your granite, which is not what you want.

2nd experience

Professional granite installers have extensive experience installing granite and drilling holes in it. Drilling a hole in granite takes a lot of work, and expertise makes the job easier.

You must take accurate measurements and know the correct drilling locations to ensure the granite does not fall apart.

They also know the right tools to use at different intervals in the drilling process.

The surface would also need to be sanded and polished properly after drilling, and they need to smooth the edges of the hole to make sure they are secure. Also, they can do it faster and more accurately.

3. Save time and hassle

If you have no experience installing granite, drilling a hole in granite can be a challenging and time-consuming task for you.

You must know how to cut, seal, grind and polish granite to do a clean job.

However, hiring a professional will save you a lot of time and hassle.

Interestingly, they won’t spend a lot of time drilling the hole compared to the time you spend doing it yourself.

They also know how to deal with unforeseen events such as cracks or chips in the granite.

How Difficult Is It To Cut Granite?

Granite is a rigid material and very difficult to cut. You cannot cut this material without the right saw and blade.

Another disadvantage of using an improper tool is that you can damage the granite in the process.

Therefore, you can only use this material with powerful tools, such as B. a diamond-coated blade, easily cut.

With such powerful tools you get a safe, precise and clean cut.

Can I cut granite myself?

Granite is one of the most complex materials to cut. However, you can easily cut this stone if you have the right tools and experience.

Therefore, you can cut granite yourself if you have the right tools and knowledge.

If you are new to cutting and working with granite, it is best to outsource the cutting or drilling task to a professional.

Can I drill holes in granite countertops?

Granite is one of the most common countertop materials.

Therefore, it is necessary to drill holes through them to attach sinks and other plumbing accessories.

So you can drill holes in your granite countertops, but you will need a diamond drill bit and a drill bit to do the job.

You can drill holes of different depths and diameters in granite countertops.

Can a plumber drill a hole in granite?

If the plumber has the right tools and knows how to drill holes in granite, he can drill the hole.

However, many plumbers do not drill holes in granite because they lack the necessary tools and expertise as it is not in their field.

Can I drill or cut an already installed granite?

Yes, you can cut or drill a granite that has already been laid.

Many homeowners often cut or modify their old granite countertops to match their new sinks or appliances.

However, for this task you need an experienced employee.

Conclusion

Many homeowners use granite for their kitchen and bathroom countertops.

This material is very beautiful, but also very expensive. It also allows modifications and adjustments including drilling to match your kitchen or bathroom items.

How much does it cost to drill a hole in granite? It generally costs between $200 and $500 to drill a hole in granite.

Price may vary depending on the contractor, depth and diameter of the hole.

I highly recommend you outsource the drilling process to professionals as they have all the expertise and the right tools for the job.