How To Boot Someone Offline Using Their Ip? The 127 Detailed Answer

Okay, we’ve all been to this place. You’re using your neighbor’s WiFi, but the signal isn’t reliable. Either you use the guest network without their permission, or you use their main network with their permission.

In any case, it is common for people to share their internet with others, especially when they live in a modern apartment society. After all, the internet is getting more and more expensive and nobody wants to pay

In this article, we’re going to explore how you can get a better WiFi signal with or without your neighbor’s permission.

Before we begin, let’s learn about the reasons why you’re getting weaker WiFi signals.

Reasons why you are getting weaker WiFi signals

One of the most common reasons for a weaker signal is obstructions like walls between the access points and your router. The distance also contributes to the weaker signals. The router can also be to blame. Not all routers are designed to receive signals from distant signals and are therefore unable to maintain a fast and consistent connection.

The best way to get a better WiFi signal – with an extender

The repeater is one of the most commonly used devices to extend the radio signal. If you want to make sure that you can get the WiFi signal that you are getting from your neighbor, then you can use the extender.

In order for the extender to work effectively, you must ensure that line of sight is working with both the extender and the router. So if the neighbor has a window, you can ask him to mount the repeater on the window itself. This way there is line of sight and you get the best possible signal strength.

To improve your wireless connection or receiver, you can get a wireless receiver like BrosTrend 1200Mbps. It’s a popular wireless adapter that can be used to access the neighbor’s router’s WiFi connection. This improves the internet connection.

You can also use the booster antenna, e.g. B. a WLAN outdoor antenna. It’s affordable and allows you to upgrade your laptop or desktop wireless receiver. It’s easy to install and activate. Plus, it’s beneficial for those who don’t have direct access to the neighbor’s router. The booster antenna allows you to pick up signals from within range and amplify them to your computer. In this way you can not only improve the signal strength, but also receive other WiFi signals. In short, you will find more wifi network and even wifi signal strength.

What if you and your neighbor live in a single building?

When the ground separates you and your neighbor, it can be a bit difficult to boost the WiFi signal. This is because you don’t have direct access to the WiFi router. This means you need to create new access points to boost the WiFi signal.

Let’s look at the following options.

WiFi Router: If you want to ensure that others can access the internet by sharing the internet bill, you need the WiFi AC router. These routers are able to transmit over several floors. This way you don’t have to give your email address or other important access data to your neighbor. All you have to do is create a wireless network with a strong password. When finished, share it with your neighbor and enjoy your entertainment devices like TV, game console and so on! Mesh network: Another solution is to create a mesh network. Measurement networks are very efficient when it comes to amplifying the signal. Also, mesh networks are designed for large homes that can range from 2,000 square feet to 4,000 square feet. Wireless Range Extenders: The final option is to use a cheap wireless range extender. It amplifies the signal from the WLAN device set up in the neighboring house. The wireless range extender is always hit and miss as it is not as powerful as the other options including mesh network or wireless device.

What if you access the neighbor’s WiFi with your cell phone?

If you are using a mobile phone, you can also optimize the connection strength as follows:

Choose the right access point to connect your phone to. You can find out which access point you find with the WiFi analyzer app. Phone cases can block the signal. So try to test the WiFi signal with or without the case. Try using your phone from a room closer to the neighbor’s room. You can also select the 5GHz WiFi signals if you want a band with less traffic.

Other Things You Can Do to Improve Wi-Fi Signal

1) Location

The first thing to fix is ​​the location of your devices. Try to minimize obstacles to get a better Wi-Fi signal. If you use a large house, you might try to place the connecting device close to the neighbor’s access point and also central to your house. That way, you don’t have to jeopardize your internet connection or that of your neighbor.

2) Update WiFi device

You should update the WiFi device to ensure it works optimally and provides an uninterrupted and strong WiFi signal. To update the device, you must either go to the manufacturer’s website or simply access the device settings and update from there.

3) Improve internet connection

Sometimes it’s your internet connection that’s to blame. If you don’t have a stable connection or a connection that can handle the load, you’re bound to have bad experiences sharing your internet with other people.

If you’re curious, you should test your connection and see if it meets your expectations. If not, then you should call your ISP and ask them about better plans.

4) Use an Ethernet cable

Nothing beats an Ethernet cable when it comes to connecting devices to the internet. The same goes for those who want to share the internet with their neighbors. If nothing seems to work, consider extending the connection with an outdoor CAT 6 cable and connecting to a router near you. This way you are sure to get a good signal and reception.

This brings us to the end of our article. Comment below and let us know what you think about using the neighbors’ wifi with or without their permission! We are listening.

Use our free tool to create unique and secure passphrases.

Download our free e-book and learn how to keep your social media presence private.

Roblox is a gaming platform that does not disclose its users’ IP addresses. However, you can still find out someone’s IP address if you follow the right process.

In this article, you will learn how to find out a user’s IP address on Roblox.

Roblox has become very popular since last year during the coronavirus pandemic. It is a gaming platform where users create their own games and play games developed by others.

This platform was created to have fun and share with other players.

However, some rogues do not use Roblox for its intended purpose. You might come across such people if you use this platform.

In such a case, you want to keep them as far away from you as possible. Even if you blocked them, they can still harass you by creating a new account.

What you can do is block their IP address. However, Roblox does not share the IP addresses of its users with you. You would have to discover it yourself.

Nobody will intentionally give you their IP address. In fact, some people don’t know what it is.

Therefore, you need to find out the IP address yourself without letting the other person know about it.

IP address also allows you to know the real location of someone you met on Roblox website.

All you have to do is provide the IP address to a website that will check the IP to determine the real location of the user.

How to Find Someone’s IP Address on Roblox

You can use several methods to find out someone’s IP address on Roblox. It depends on your skills and how far you are willing to go to find out.

If you are using a server where games are played by other users, you can usually add IP grabbers to the game’s source.

This allows you to know the user’s IP address without them knowing. However, for this you need to have some programming knowledge.

In case you don’t know, you can also use a pre-built IP grabber like Grabify.

Below are some of the methods to find a user’s IP address on Roblox.

Use an IP grabber

This is one of the easiest techniques to find a user’s IP address as it doesn’t require much effort on your part.

This method requires the user to visit the URL you created via the IP grabber. If the user doesn’t do this, you won’t be able to get their IP address.

This is because this technique works outside of the Roblox service.

There are several IP loggers or grabbers out there. Among these, one of the best is Grabify IP Logger.

It’s free and you can use it online without creating an account.

In order to use Grabify, you need to follow the steps mentioned below:

First you need to get a URL of some web content that the user wants. This URL will trick the user into clicking on it so you can get their IP address.

Now go to Grabify’s homepage and enter the selected URL in the form.

Then you need to click on the “Create URL” option to allow Grabify to create a trackcode with a shortened URL. This trackcode will help you find the user’s IP address, and the compressed URL will direct the player to the web content you selected in the first step.

Now go back to Roblox site and paste this shortened url made by Grabify for user to click on it. Don’t use the actual URL.

When the user clicks on the URL, the Grabify site can get their IP address. Then the user will be directed to the link you selected for them to view.

To know their IP address, you need to revisit Grabify and enter the track code you received earlier. Then the compressed URL requirements will be displayed. For each request, you can see the location, IP address, operating system, user agent, etc.

Include an IP grabber in your code

As a Roblox game developer, you can provide your game’s coding in such a way that you know the IP address of the user accessing your game server and playing your game.

To do this, you need to know how to code, especially JavaScript. Make sure you do this very smartly so Roblox doesn’t catch you.

Roblox shouldn’t know you’re trying to get someone’s IP address; otherwise, you will be prevented from using its services.

It is better if you delete the code immediately after getting the IP address of the user you want.

To do this, you can check out the steps mentioned below. These steps may vary based on your skills and requirements.

First you need to download and install “Roblox Studio”. Sign in to your Roblox account and click on the “Workspace” option from the list on the right.

Then find the folder named “Script” and click on it to go to a script interface. In this file you have to enter the coding for an IP grabber. This will log the IP addresses of other players on Roblox who join your game server. To do this, you need to copy the encoding given below, paste it into the folder and then save it.

game.Child Added: connect(function(child) {

if (child: IsA(“NetworkServer”)) {

.then (child.IncommingConnection: connect(function(IP, replicator) {

Instance.new(“StringValue”, workspace).Name = IP print( end) end

}

})

After saving this script, all you have to do is host the game on your server and get the user to play your game on your server.

When this user enters your game server, you can see their IP address on your screen. This protects you from malicious players.

How to stop someone from tracking your IP address on Roblox

By now you know that anyone can track your own IP address on Roblox. Experienced hackers can use it with other media to attack your network or remotely break into an unsecured computer.

So you also have to protect yourself so that no other Roblox user can access your own IP address. You must hide your IP address from other players. This is pretty easy as you only need to use a VPN or proxy server.

You can use NordVPN, SurfShark, or ExpressVPN software for this task.

, SurfShark or ExpressVPN software for this task. You can buy proxies from Highproxies, MyPrivateProxy and Blazing Proxies.

frequently asked Questions

Some frequently asked questions about Roblox IP Finder are listed below.

Is it illegal to find or track someone’s IP address? No, it is not illegal to look up someone’s IP address. These addresses are actually public data. Each web request from a device sends its respective IP address to the internet. However, Roblox doesn’t allow this and can block you if you get caught. What is your IP address useful for? With a user’s IP address, you can know their real location and block them. By blocking their IP address you can prevent them from creating a new account, which they usually do if you just block them from your game server.

Final Thoughts

Now you know how to get a user’s IP address on Roblox.

Although the Roblox website doesn’t disclose this, you can do this by using an already built IP grabber or by adding an IP grabber’s script to your server.

You can also protect yourself from IP address tracking on Roblox by using a quality VPN or proxy service from reputable VPN or proxy providers.

What is BOOTP (Bootstrap Protocol)?

BOOTP (Bootstrap Protocol) is an Internet protocol that allows a network user to be automatically configured to obtain an IP address and boot an operating system without user intervention.

Managed by a network administrator, the BOOTP server automatically assigns the IP address from a pool of addresses for a specified period of time.

BOOTP was originally defined for Request for Comments 951 in 1985 to replace the Reverse Address Resolution Protocol, which required servers to be present on every server IP address. With BOOTP, a central BOOTP server could exist for numerous subnets.

Today, BOOTP runs with the User Datagram Protocol (UDP) and is the basis for the Dynamic Host Configuration Protocol (DHCP). DHCP servers are used to receive client requests.

The basis for DHCP, today BOOTP, runs with UDP.

Organizations have also implemented the BOOTP protocol in diskless Unix workstations to determine the location for a boot image filename and IP addressing when configuring and booting Microsoft Windows installations.

The Internet has improved our lives by increasing social interactions and creating new ways of doing business. However, not everyone on the internet is a model citizen and on some occasions they will hit you with a DDoS attack. A DDoS attack is a cyberattack in which the attacker attempts to make a service unavailable to intended users by temporarily disrupting a host’s services.

So how do you know if you’ve been DDoSed? The key to knowing that you have been DDoSed is the length of time the service has been down. Sometimes online services and websites can go down due to legitimate traffic, but this is usually resolved within hours. If the service is down for a day or two, it could be a DDoS attack. Online gaming services used by Xbox and PlayStation players when DDoSed becomes unresponsive making gaming difficult and intermittent.

Another sign of a DDoS attack is the time it takes you to access a website. A website usually takes a few seconds to load, depending on the speed of your internet. However, if you try to access a website and it takes minutes or hours before you can load a single page, you may be experiencing a DDoS attack.

It’s not easy to distinguish between legitimate traffic and a DDoS attack. A DDoS attack can be devastating, and some people offer DDoS attacks as a service to anyone who wants to attack a specific website. Read on to find out what happens when you get DDoSed, whether you can get DDoS on PlayStation 4 or PlayStation 5, and how long DDoS attacks on Xbox last.

What happens when you get DDoSed?

DDoS attacks are very easy to perform, and the most successful websites are more likely to be subject to regular DDoS attacks. Depending on the type of DDoS attack, several things can happen; Therefore, it is important to prepare yourself on how to deal with them.

One of the most common effects of a DDoS attack is that websites and online services become unavailable to many users. A DDoS attack can also lead to server and hosting problems. If you continue to face regular DDoS attacks, your website becomes vulnerable to other attacks like hacking. You lose time and money repairing damage caused by a DDoS attack.

Perpetrators of a DDoS attack typically target websites to make them unavailable to intended users. They will not transact business through your website, and consumers of your service will refrain from doing so until you get the website up and running again. If you don’t fix your website within a short period of time, it will affect your SEO. If users browse your websites and keep seeing the 502 Bad Gateway error, you may be losing your search rankings.

Sometimes a website can be the target of numerous DDoS attacks from competitors or political activists. If your website has been subject to regular DDoS attacks, you could be experiencing issues with your server or host. Some hosting providers provide you with tools to prevent DDoS attacks. If you don’t have tools to prevent a DDoS attack and you have shared hosting, the attacks on your websites can also affect other websites on the same server. Your hosting provider may refuse to offer you hosting services if you keep receiving DDoS attacks to save other websites on their servers.

When you face a DDoS attack, use all your systems to get your website back online. Sometimes a DDoS attack can cripple your security systems and hackers can take advantage of this situation and access your website through the back door. When you bring your website back online, you can choose to fight the hackers who have taken control of it, completely crippling your website in the process.

Sometimes a hacker stays connected to your website and gets personal information from all your users. If you face a DDoS attack, make sure you back up your website before attempting to recover it.

Many websites make money through advertising, sponsorships, and the sale of services or products. In order for you to keep making money from your website, users should be able to visit it. If the website is unavailable for days, no user can see the websites or buy your products or services. Therefore, you lose money as long as the site is down. You will also lose money trying to fix or restore the site, especially if you didn’t have backups.

DDoS attacks are evolving; Therefore, you must be on high alert to protect your website from common attacks. Technology is getting better, and attackers won’t be using the same tactics they used five or ten years ago. Companies like Kaspersky are developing new ways to protect their websites and servers from DDoS. It is also important to ensure that your business partners have good security systems in place. If the attackers cannot flood your website, they may find the weakest link connected to you.

Can you DDoS on PlayStation 5 (PS5) or PS4?

The PlayStation 4 and PlayStation 5 are video game consoles developed by Sony Interactive Entertainment that can play various video games online and offline. If you have a PlayStation 4 or PlayStation 5, you can connect them to online services like PlayStation Network and PlayStation Now to play online video games.

You can perform DDoS on PlayStation 4 and PlayStation 5 via online gaming services such as PlayStation Network and PlayStation Now. Players using an internet-connected PlayStation 4 or PlayStation 5 will have trouble logging into their accounts.

Individuals or groups perform DDoS attacks on online gaming platforms with different motivations e.g. B. to gain an unfair advantage in ranked matches. The PlayStation Network is a frequent target of DDoS attacks, particularly by criminal hackers and political activists.

In a DDoS attack, someone can attack your device if you can connect it to the internet. You can connect your PlayStation 4 or PlayStation 5 using an Ethernet cable. You can then log into your PlayStation Network account and perform various activities such as B. Playing online video games, purchasing video games through PlayStation Store, and watching movies or TV shows.

In 2014, a DDoS attack took down the PlayStation network, leaving online games unavailable for hours. The hacking group known as “Anonymous” appropriated the attack and claimed it exposed vulnerabilities in Sony’s systems.

Perpetrators of DDoS attacks on PlayStation Network have provided several reasons to support their actions. The hacker group known as the Lizard Squad conducted a DDoS attack on numerous online gaming platforms, including the PlayStation Network, during the Christmas holidays in order to force people to spend time with their families. The hacking group believes many people spend a lot of time playing video games online with strangers and ignoring their family members.

Some hackers claim that gambling corporations make billions of dollars in profits but fail to improve or help society. The DDoS attacks on the PlayStation Network are disrupting business because users cannot purchase various services and productions from the PlayStation Store. Companies like Sony lose a lot of money spending time fixing their website and updating their security system. Sometimes even competitors can be behind a DDoS attack, allowing users who fail to log into a successful website to switch to their website.

Hackers don’t necessarily initiate a DDoS attack for any reason, they do it because they can. In 2016, a New Hampshire teenager pleaded guilty to causing massive disruption to PlayStation, Amazon, Netflix and other major websites with a DDoS attack.

The teenager and several others created a botnet that targeted devices such as video cameras, turning them into bots and using them to launch DDoS attacks on various websites. They carried out the DDoS attacks for no particular reason, causing Sony to lose nearly $3 million in massive revenue.

The main reason online gaming platforms are still vulnerable to DDoS attacks is that many players using online gaming services are doing everything they can to win. Some people even offer online gamers DDoS services for rent.

The hackers disrupt the games by preventing numerous players from registering and only those who can register can participate and win the games. Many online gaming platforms are improving their security systems to ensure online gamers participate in fair and competitive games.

Can someone DDoSen me on Xbox?

Someone can easily DDoS attack you on your Xbox if they know your real IP address. They can send more data to your IP address, making it harder for you to connect to the internet from your Xbox.

Your real IP address, provided by your internet service provider (ISP), which is used to connect your Xbox to the internet, is vulnerable to DDoS attacks. This is because that IP address is public, which means that any website or internet service you connect to knows your IP address details.

When you connect to multiplayer online games on the internet, your IP address is exposed to everyone you connect to. This could allow them to run DDoS tools to flood your internet connection, i.e. H. Targeting your IP address with large amounts of trivial data. This makes it extremely difficult for you to connect to the internet as your internet connection does not have free bandwidth to connect as it is bombarded with DDoS traffic.

A VPN is the easiest way to protect against DDoS (I use NordVPN). Since the location of the VPN server through which your connection is routed could have anti-DDoS measures in its perimeter network to protect against DDoS attacks. Please ensure that the VPN you are using protects against leaks, especially DNS leaks where the VPN does not use its own DNS server and instead uses the one provided by the ISP.

Also some apps like social messaging apps especially real-time chat apps, VoIP used for voice calls over internet to multiplayer games will expose your real IP address even if you are using poor quality VPN.

Again, NordVPN protects against all these types of leaks, including DNS leaks to WebRTC leaks, and I tested this with the ipleak website, which shows what potential leaks your VPN could have. Luckily, NordVPN has no leaks when tested on the ipleaks website, so it offers comprehensive protection against leaks.

How long do DDoS attacks on Xbox last?

Gamers using the Xbox console can connect it to the internet and sign in or sign in to the Xbox Network and the Xbox Games Store community. A DDoS attack on Xbox makes online gaming and the purchase of video games and other products unavailable to users. If your Xbox console was the target of a DDoS attack, you might be wondering how long it will be before you can use your device.

A DDoS attack on an Xbox console can last up to 24 hours. A DDoS attack on Xbox targets the Xbox network. The attacker selects a specific device and floods its IP address with communication requests from multiple devices. These multiple requests create a congestion that blocks network connections on the target devices.

When you play online games with an Xbox console, other players may get angry and threaten to “flood” your IP address. If a player floods your IP address, you will not be able to access online services from the Xbox network. There are certain things you can do to prevent a DDoS attack and stop an ongoing attack.

Online gaming can be very competitive, especially when many players from all over the world are involved in the games. Some players might want to win the game, while others just want to disrupt other players’ progress. When a gamer doesn’t like what happened in the games, some usually look for DDoS attacks that individuals or groups can hire. If they get your IP address, they can easily target your Xbox console and block you from accessing the Xbox network for hours.

If you think your Xbox was the target of a DDoS attack, the first thing to do is turn off your Xbox or reset your internet router. Turning off the power for almost ten minutes will stop the attack and you may get a different IP address that the attacker doesn’t have access to. You should also contact your internet service provider and report the incident. If the attacker is someone you know in the online gaming community, avoid participating in multiplayer games that they will participate in.

Preventing DDoS attacks is difficult, but there are things you can do to reduce the likelihood of a DDoS attack. The first is to avoid using applications that might reveal your network’s IP address. Some social apps and online multiplayer games may reveal your IP address to anyone in your session. You should also avoid using Wi-Fi hotspots when signing in to your Xbox network accounts. Some hackers use WiFi hotspots to get information about all devices connected to these WiFi hotspots.

You can also use a VPN (Virtual Private Network) to prevent other players or hackers from gaining access to your IP address. A VPN encrypts your internet traffic and protects your online identity from malicious individuals. Make sure you get the best VPN that protects and hides your IP address and encrypts all data you send or receive through your Xbox console. You should also make sure to scan and protect your computer from malware.

Wrap up

Some of the things that make most websites vulnerable to DDoS attacks are cheap hosting, lack of preparation, and insecure or outdated code. Many companies offer hosting services and not all offer quality services. Get hosting services from a reputable company with few clients. Some people think that a DDoS attack will never happen and don’t take the necessary precautions to prevent it. Website developers use up-to-date code and will always update it if they discover certain vulnerabilities. You should make it a habit to update your website security systems to keep attackers out.

Companies providing online gaming services, such as Sony and Microsoft, have been the target of multiple DDoS attacks by individuals and hacker groups such as the Lizard team. Some people were arrested and found guilty of carrying out DDoS attacks, while others were ordered to pay fines to affected companies. It can prevent future attacks, but to be on the safe side, companies are constantly improving their security system to ensure their users can enjoy video games without interruptions.

You communicate with the Internet via your IP address. Without her this would not be possible.

Since it’s so important, you must be asking yourself – is IP grabbing illegal? Is it illegal to track an IP address?

We’ll answer these questions (and more) in this short five-minute article.

Is IP grabbing illegal – yes or no?

First, what is IP grabbing?

Well, it’s when someone uses a third-party service to “grab” your IP address. For example, they could use Grabify. This allows them to create a link that they can send to you. When you access them, they can see your IP address (among other information) on their page, as follows:

If they click “More Info” on the right, they can even see your local IP address – the one your device is using on your network.

So is IP grabbing illegal?

nope There is no specific law preventing someone from attacking you with an IP grabbing tool. Your IP address is pretty public information at this point — just like your address or phone number.

However, what someone does with your IP address can become illegal.

Here’s when IP grabbing is against the law

When the person grabbing it decides to DDoS you (basically force you to go offline with cyber attacks). They can attack your network with a DDoS attack because they know your IP address. In most places this is illegal. However, DoS attacks may not always be illegal as they are weaker than DDoS attacks. However, if someone keeps attacking you, you can contact the police.

When the person who stole your IP address tries to use it to hack your computer remotely. Usually an IP address is not enough for this, but some skilled hackers might misuse Shared Resources to perform such cyber attack. They could also use it to scan for open ports which they then try to exploit to take over your device.

When someone uses IP grabbing to target you with phishing attacks. For example, they use it to find out who your ISP is and then target them with phishing and vishing attacks.

Is IP tracking illegal?

Sounds like it should be, but usually it isn’t. This is how websites track their users and display ads across the web. Businesses also use it for all sorts of B2B purposes (marketing, service delivery, analytics, etc.).

As long as they comply with legal data processing requirements (like GDPR), there is no conflict with the law.

Is it illegal for a person to track your IP address?

Again not really. You can freely use services like IP Logger or IP Tracker to keep track of your IP address. There is no specific law against this.

But if they track your IP address for illegal purposes (harassment, stalking, DDoS-ing, cyber-attacks, etc.), it’s obviously against the law.

Should You Hide Your IP Address?

That’s up to you.

If you want to enjoy more privacy and not have websites and random people track it, then by all means, you should. The same goes if you don’t want hackers to abuse it or use it for DDoS.

You’ll also enjoy other benefits by hiding your IP address:

The ability to prevent someone from finding out what country and city you are from, who your ISP is, and what your zip code is.

You can bypass geo-restrictions and unblock various websites and online services – like Netflix or Pandora Radio.

You can also bypass firewalls at work and school. Also, you can bypass government censorship as it also relies on firewalls to block websites.

By hiding your IP address, you make it much harder for advertisers to track your online movements and spam you with personalized ads.

You may be able to bypass geographic price discrimination. In this case, websites show different prices depending on the location. Hiding your IP address means websites can no longer see your location.

Torrenting becomes safer because wannabe hackers, lawyers, and copyright trolls can no longer see your IP address in the swarm.

No risk of a cybercriminal logging them and selling them on the dark web.

IP bans do not prevent you from playing online or posting on forums.

How can you hide your IP address?

These are the most convenient ways to do this:

1. Use a VPN

This is an online service that masks your IP address and encrypts your traffic. Here’s how the process works:

You download a VPN app and install it on your device. You use the app to connect to a VPN server. The app and the server establish a secure connection between them. All data passing through this connection is end-to-end encrypted (only the client and the server can encrypt/decrypt it). When you visit a website, your connection requests go there through the VPN server. The website receives the requests from the VPN server, so it only sees the IP address of the server. Anyone else trying to look up your IP address will only see the server’s address as well.

Overall, a VPN is a great way to protect your privacy. Also, by encrypting your traffic, it ensures:

Hackers cannot abuse vulnerable WiFi networks to monitor your traffic.

ISPs and surveillance agencies cannot spy on your web surfing.

ISPs can no longer throttle your bandwidth.

Looking for a reliable VPN service? Here at SmartyDNS, we offer high-speed VPN servers with military-grade 256-bit AES encryption and highly secure VPN protocols (OpenVPN, SoftEther, and IKEv2), and we adhere to a strict no-logs policy. Our VPN servers act as proxy servers and we also offer a Smart DNS service that allows you to unblock over 300 geo-restricted websites around the world. We offer handy VPN apps for Windows, Mac, iPhone/iPad, Android, and Fire TV/Stick, as well as extensions for Chrome and Firefox browsers. Special offer! Get SmartyDNS for $3.7 per month! Yes, and we keep your 30-day money-back guarantee too. Сэкономьте 53% сейчас

2. Use a proxy

A proxy server works in a similar way to a VPN – it intercepts your connection requests to the Internet and forwards them on your behalf. Therefore, every website you visit only sees the IP address of the proxy server.

However, unlike a VPN, proxies do not offer powerful encryption. Sometimes they don’t offer any at all.

So you get some privacy by hiding your IP address, but your traffic may not be secure. Furthermore, if you use a free proxy operated by a malicious actor, they could be logging your data.

In general, you should only use a proxy if you need to unblock a website. If you also need security, use a VPN. Instead of getting separate services, consider using a VPN whose servers double as proxies. It’s a lot cheaper.

3. Use mobile data or switch Wi-Fi networks

If you’re on your phone and want to change your IP address quickly, try switching from WiFi data to mobile data.

You’re using your carrier’s network instead of your WiFi network’s ISP, so you get a different IP address.

What if you have a limited mobile data plan and usually use WiFi?

In this case, you can switch Wi-Fi networks to change your IP address.

4. Ask your ISP to change it

They gave you your current IP address, so you can ask them to change it. Maybe see if they can also offer a dynamic IP address (one that changes at regular intervals).

If you already have a dynamic IP address, you can usually change it by restarting your router.

Can you hide your IP address with Tor?

yes you can do that Just like with a VPN, your connections go to the internet through a server. So everyone can see the IP address of the Tor server you are using.

But we must warn you – Tor has had and continues to have problems with IP leaks:

In 2017, the TorMoil issue leaked users’ IP addresses.

Tor can leak your IP address when trying to open Windows DRM files.

Torrent clients can sometimes reveal your IP address.

Certain file types (like PDFs) can bypass proxy settings, causing Tor to reveal your IP address.

Plus, you also get pretty slow speeds since there are only about 6,000 servers for over two million users.

Is IP grabbing illegal? The final result

Unless the person hijacking your IP address wants to use it for something illegal — like DDoSing you or hacking into your computer.

For normal purposes, IP grabbing (and tracking) is generally legal. If you’re worried about your privacy being violated, use a VPN to hide your IP address. It’s the easiest and most convenient way to do it. If you know any other methods to mask your IP address (besides the ones already mentioned), let us know in the comments.

Technology vector created by freepik – www.freepik.com

You are woken up by your phone being flooded with notifications. You reach for it sleepily and find a barrage of messages from frustrated customers complaining about your site.

You try to load your website but get the horrible message “service unavailable”.

You could be a victim of a DDoS attack.

What is a DDoS attack?

In a distributed denial of service (DDoS) attack, an overwhelming amount of data requests are sent to a web server to degrade its performance. This disruption can cause the web server to slow down or crash completely.

Is DDoSing illegal?

Whether you want to get revenge for poor customer service or just want to prank a friend, launching a DDoS attack against another person or company is illegal.

Is DDoSing illegal in the US?

DDoSing is an illegal cybercrime in the United States. A DDoS attack could be a federal crime under the Computer Fraud and Abuse Act (CFAA).

Using booter services and stressers is also against this law.

If you are found guilty of intentionally damaging a computer or server in a DDoS attack, you can be charged with up to 10 years in prison.

If you think you have been the victim of a DDoS attack, you should seek legal advice as soon as possible.

How does a DDoS attack work?

A DDoS attack is a coordinated attack between multiple computers and Internet of Things (IoT) devices. These devices are infected with malware so that cyber criminals can control them.

The more infected devices (bots) an attacker recruits, the stronger the attack. When these bots are connected to each other, the malicious network is called a botnet.

A botnet consists of multiple compromised devices

When a DDoS attack is initiated, each bot sends consistent traffic requests to the host IP address. This flood of requests overwhelms the web server, forcing it to deny access (or service) to legitimate website visitors.

Here’s an intriguing visualization of a DDoS attack in action:

‍

‍

DDoS attacks are not always launched for extortion purposes, such as B. ransomware. They are usually only meant to cause disruption and send a message of hatred. They can be started by either an individual or a group of people.

The motivation behind a DDoS attack ranges from personal revenge to political activism. Some attacks are launched by hacktivist groups like the ubiquitous group Anonymous.

Common Types of DDoS Attacks

There are many variations of DDoS attacks. Some are simple and relatively easy to defuse, others are extremely complex. To maximize damage and frustration, attackers sometimes use a variation of DDoS attacks in a single event.

Here are three common types of DDoS attacks.

1. Volumetric attacks

This is the most common type of DDoS attack. The attacker floods a web server with data packets to fully utilize its bandwidth. This prevents real visitors from loading a victim’s website.

DNS amplification is a type of volumetric attack in which increased data requests are made to open DNS servers and the resulting response traffic is directed to victims.

2. Application Attacks

An application attack attacks the top layer of the Open Systems Interconnection (OSI) model, layer 7. Because application attacks only focus on the top layer, they require less bandwidth saturation to execute a successful DDoS attack.

Because application attacks target the path of common Internet requests such as HTTP, these attacks can require millions of downloads per second or millions of page refreshes per second. The effect is rapid consumption of server resources.

3. Protocol Attacks

This particular cyber attack targets levels 3 and 4 of the OSI model. It aims to exhaust server resources for firewalls and load balancers.

An example of a protocol attack is a SYN flood attack. A SYN flood attack exploits the standard 3-way handshake of a TCP/IP transaction. The three phases of this transaction are as follows:

SYN – the host receives a message to initiate the transaction

SYN/ACK – confirms the information request

ACK – Server closes the connection.

In a SYN flood attack, the server sends an ACK message to a spoofed IP address that does not respond, preventing the handshake loop from closing. Because the server is forced to wait for multiple ACK responses that never arrive, its resources are exhausted.

What is the difference between a DoS attack and a DDoS attack?

A DoS attack is performed by a single computer, while a DDoS attack is performed by a network of compromised devices. The cumulative effect of DDoS attacks makes them far more destructive to web servers.

Difference between a DoS and a DDoS attack

DDoS attacks are very damaging to an online business as they completely stop the flow of traffic or slow down a website to the point of being unusable. In both scenarios, a website’s income generation machine grinds to a halt.

Business owners must therefore learn to recognize when a DDoS attack is occurring and understand the proper remediation process.

How to recognize when a DDoS attack is taking place

There are some signs that a DDoS attack is taking place. These signs alone are not enough to indicate an attack, but they should prompt further investigation.

1. Your website loads very slowly

Because DDoS attacks drain web servers’ resources, an attacked website processes information very slowly if it can still be loaded.

You can test your website speed for free using Google’s Page Speed ​​Insights tool. You should have a website speed benchmark against which to measure yourself.

To make sure there is no problem with your internet connection, you should try loading other websites as well.

2. You get a 503 error Service unavailable

If you get a 503 Service Unavailable error when you try to load one of your web pages, but other websites load just fine, there is a high chance that you have fallen victim to a DDoS attack. The 503 Service Unavailable error means that a web server cannot process a load request.

Keep in mind that this error can also mean that a server is temporarily down for maintenance.

A 503 error should definitely warrant further investigation. If you don’t have access to your server logs, you should contact your ISP to check the status of your server.

If you have access to your web server, you can use access logs to identify a DDoS attack.

Identifying a DDoS Attack Using the Command Line Interface (CLI)

You can use your web server’s command line interface (CLI) to create a log of all active connections to your server.

You can generate a list of IP addresses associated with your server ports with the following command prompt:

netstat -on

Here is an example output:

Example of an error-free web server log – Source: loggly.com

During a DDoS attack, you will find that multiple instances of the same IP address are connected to a server port, causing the connection to time out.

Here is an example of such an instance:

Sample web server log during a DDoS attack – Source: loggly.com

You can narrow your filter to only list HTTP requests for your website on port 80. This helps you identify multiple connections from a single IP address. To do this, use the following command:

netstat -a | grep :80 | sort by

Use the following command to list the number of connections by IP address to port 80 (HTTP traffic):

netstat -plan|grep :80|awk {‘print $5’}|cut -d: -f 1|sort|uniq -c|sort -nk 1

You should also analyze IP address connections on the port on which all encrypted traffic (HTTPS) runs, port 443.

netstat -a | grep :443 | sort by

And list the number of connections by IP address to this encryption port as follows:

netstat -plan|grep :443|awk {‘Print $5’}|cut -d: -f 1|sort|uniq -c|sort -nk 1

Use the following command line to see how many times each IP address connects to your server:

netstat -ntu | awk ‘{print $5}’ | cut -d: -f1 | sort | uniq -c | sort -n

During a DDoS attack, your server can receive thousands of connection requests from a single IP address, so watch out for unusually high server requests.

In 2014, malware-infected CCTV cameras were used to launch a DDoS attack that peaked at 20,000 requests per second (RPS).

Similarly, in 2016, a devastating Mirai-based DDoS attack was launched against Dyn, a DNS service company. The attackers used Wi-Fi cameras in their botnet to carry out the attack. The attack caused internet outages across most of the east coast.

To most effectively identify a DDoS attack from your server logs, you need a baseline of server connection activity to measure against. This helps you detect and remediate an attack as quickly as possible, rather than waiting to see how the data unfolds.

What to do during a DDoS attack?

If you do not have immediate access to your web server, you should contact your internet service provider as soon as possible. Once the attack is fixed, you may get a new IP address.

To save you time (and stress) during a DDoS attack, preemptively call your ISP to make note of the extension number to call if one occurs. As with all cybersecurity threats, rapid response is paramount.

If you have access to your server, you should clear your logs as soon as possible. Since the goal of a DDoS attack is to drain as many of your web resources as possible, your web server could fail catastrophically under the immense data load. Make sure you only delete log data that you don’t need.

If you are able to identify suspicious IP addresses during a DDoS attack, you should blacklist them and monitor the course of the attack. If the severity decreases or the IP addresses try to connect again, they are probably from innocent visitors. DDoS attackers tend to change the IP addresses of their botnets when blacklisted.

How to prevent DDoS attacks

DDoS attackers are constantly evolving their strategies to bypass mitigation solutions. Their methods are becoming increasingly complex and rigorous. To give your organization the best chance of mitigating a DDoS attack, you need to implement multiple layers of cybersecurity defenses.

1. Increase the bandwidth of your web server

With greater resource bandwidth, your server could potentially bear the burden of a DDoS attack while your website remains functional.

Internal server hardware doesn’t give you the ability to efficiently expand your bandwidth to meet increased demand. This limitation makes local hardware vulnerable to failure during a DDoS attack.

You might want to consider moving to a secure cloud-based web server. With advanced cloud-based web servers, you can expand your bandwidth very efficiently. They also provide bandwidth tolerance to absorb DDoS attacks before your resources are penetrated.

Some cloud-based servers have a dedicated security team that continuously monitors your website for DDoS attacks.

2. Blacklist suspicious IP addresses

If you identify suspicious IP addresses accessing your website, consider blacklisting them. This would require you to continually monitor your access logs for unusual activity. Just make sure you’re not too lucky, you don’t want to blacklist innocent potential customers.

3. Implement multiple firewalls with packet filters

Multiple firewall layers are a very effective DDoS protection solution. In a double firewall configuration, traffic must traverse two screening routers and a bastion host before entering your internal network.

The first filter identifies and removes spoofed source IP packets. Spoofed packets are identified when their hop counts differ from the original source IP address.

The second filter has more stringent entry requirements. It uses a Router Path Analysis (R-PA) technique to analyze the path names of incoming data packets. Fake IP packets can be easily identified and blacklisted by their pathname values.

Dual firewall DDoS mitigation

Can a VPN stop DDoS attacks?

A VPN cannot protect you from a DDoS attack if the attacker knows your real IP address. If you think a potential attacker knows your IP address, you should change it to get the cybersecurity benefits of your VPN.

If your ISP offers you a dynamic IP address, resetting your router will change your IP address. Otherwise, you’ll need to contact your ISP to have it changed manually.

Is your business at risk of a data breach?

At UpGuard, we can protect your business from data breaches, identify all your data leaks, and help you continuously monitor the security posture of all your vendors.

Assess your risk of suffering a data breach, CLICK HERE to get your FREE security assessment now!

If you suspect someone is stealing your WiFi, you can check for router network activity.

There are third-party mobile apps that can help track down unauthorized Wi-Fi users.

Your router’s web-based admin panel can help you see what devices are using your network.

For more stories, visit Business Insider’s Tech Reference Library.

No doubt you’ve heard the warning for years: it’s extremely important to secure your home network with strong Wi-Fi security and a password.

Without proper security, not only can neighbors and other strangers steal your Wi-Fi—a service you’ll undoubtedly pay for—but the free riders could gain access to shared folders and other resources on your network.

How to tell if someone is stealing your WiFi

If you’re concerned that someone is stealing your WiFi, there are a few tools at your disposal to help you find out.

Check the status lights on your wireless router

The easiest way to tell if someone isn’t using your WiFi is to take a look at your router — but that only works if you can take all of your wireless devices completely offline. If you have a lot of devices (like smart home gadgets) that use Wi-Fi, don’t bother with this approach and go straight to the next one.

But if you can count all the devices on your Wi-Fi network on one hand, take them offline — either turn them off or put them on airplane mode. Then watch the status lights on your wireless router. If no devices are using Wi-Fi, the lights should not flicker or blink. If so, then someone else is probably connecting to your network.

Use a Wi-Fi detective app

There are many apps available in the app store for your mobile device that promise to scan your network and provide a list of all connected devices. You can search the App Store for options, but a reliable app is called WiFi Guard, which is available for both iOS and Android. This app gives you a list of all connected devices that you can scan to see if there are any devices that you don’t recognize.

WiFi Guard is one of many apps that can show you a list of all devices using your network. Dave Johnson/Business Insider

Many devices are identified with easy-to-understand names, like your laptop, phone, and some smart home devices. However, some may be reported as “unknown device,” which is relatively unhelpful when you’re trying to determine which ones are yours and which ones are interfering with each other.

Use your router’s app

If you have a relatively modern Wi-Fi router, it probably works with a mobile app – you may have originally configured the router with the app. If so, you can launch the app on your phone and look for a network map, protocol, or customer list.

Every router is different and there is no standardization of router software, so do your research. But if you can find that list, it’s essentially an “official” version of the device list from a third-party Wi-Fi Detective app. If you have a multi-band router, the app will probably even show which radio (e.g. 2.4GHz or 5GHz) each device is connected to.

Use your router’s mobile app to look for a list of connected devices. Dave Johnson/Business Insider

Login to your admin control panel

If none of these other options work, your last (and often most complicated) option is to log into your router’s admin panel in a web browser. To do this, you need to know the following:

Your admin username: By default, this is almost always “admin”, although you may have changed it to something else when you first set up your router if you have practiced good security hygiene.

: By default, this is almost always “admin”, but if you’ve practiced good security hygiene you might have changed it to something else when you first set up your router. Your admin password: If you have an older router and have never changed the password, this could be hack bait like “default” or “password”. Hope you changed it.

: If you have an older router and have never changed the password, this could be hack bait like “default” or “password”. Hope you changed it. Your IP address: Most often, your network’s IP address is http://192.168.0.1/ – enter this address in a web browser and log in if given the opportunity. If that’s not correct, you need to find the IP address for your network: In the Start search box, type “ipconfig” and press Enter. Your IP address should be the “Default Gateway”.

You can find out your IP address using the Windows tool ipconfig. Dave Johnson/Business Insider

After logging into your administrator control panel, look for a network card, user log, or customer list. As we mentioned, every router is different and there is no standardization of router software, so you’ll have to do some research to find it.

Here’s how to kick someone out of your network

If you find an unauthorized device on your home network, there are two easy ways to get rid of it:

If you see an unauthorized client in the mobile app or in your router admin panel, select the entry for that device. You should see the option to block, lock, or eject the device.

You may be able to block devices from your router’s app or admin control panel. Dave Johnson/Business Insider

Instead of blocking devices one by one, you can kick each device off the network at once (including your own devices) by changing the WiFi password. If you don’t already use a password, be sure to turn on network security and add a password right away. Even if you already have a password, if someone is using your network and you don’t know how they got access, you should change your password and make it stronger. If your network offers multiple types of security, switch to a more secure system, such as B. from WPA or WPA2-TKIP to WPA2-AES.

Watch the distance

network frequency

Place your router in an open area

If you’re not happy with the performance of your home or office WiFi, or simply want a faster connection, you’ve come to the right place. This article explains some helpful tips and tricks to boost WiFi signal. Without further ado, let’s take a look at some of the best ways to improve your Wi-Fi signal. One of the most common issues that poor Wi-Fi signal/performance can cause is the distance between the computing device and the router. A wireless signal can only travel so far before its quality degrades. Position your router close to your computing device and enjoy a significantly faster web browsing experience. Also, try to place the router in a position that allows for a clear path to your computing device. Walls, corners, and other objects between the router and your computer reduce the performance of your wireless network. Even phone systems can interfere with wireless signals. Next time you buy a phone system, make sure to buy one with DECT 6.0 to avoid interfering with your home or office WiFi. Every WiFi network has a frequency. Examine the network admin interface to ensure it is properly configured for optimal performance. Those who have a dual-band router will likely get better throughput using the 5GHz band than the commonly used 2.4GHz band. While moving from 2.4GHz to 5GHz won’t improve performance, it will likely reduce interference from surrounding wireless networks and wireless devices. This reduction in interference occurs because most people do not use 5 GHz. Your Wi-Fi router should be placed in an open space, away from walls, room corners, electronic devices, and household appliances. Even something as simple as a lamp plugged into the wall can be enough to affect the quality of your home or office WiFi. So, move all those cables and electronic devices as far away from the router as possible.

Buy Wifi products

Interference from other wireless networks

Be on the lookout for WiFi leeches

Use the external antennas of your router

If you live or work in a densely populated area, you should be aware that interference from other WiFi networks can affect the quality and speed of your wireless connection. Unfortunately, there is no easy way to fix this problem other than moving your computing device closer to the router or moving your home/office to a less populated area. Take a look at your Wi-Fi router’s admin interface to see the number of connected devices. You can also use a network analysis tool to find out if unknown computer devices are hacking into your Wi-Fi network. Never leave the network open. Aside from closing the network, you should also create security to prevent piggybacking. Make sure you set up WPA2 protection with a password that nobody can guess. Some routers come with external antennas that you can flip up for better coverage. Unfortunately, too many people leave these antennas in the down-facing position, either because they forget about them or don’t understand that their positioning can improve Wi-Fi performance. Set it in a vertical position and raise the router as high as possible. Some choose to mount the router at a high point on the wall. Others choose to place the router on a shelf or high table to improve the signal. Also take advantage of the many tools available to visualize the actual coverage of your Wi-Fi network. Examples are Heatmapper and inSSIDer for Office. Each shows the strongest and weakest areas of the Wi-Fi network. Alternatively, you can tap a mobile app like Netgear’s Wi-Fi Analyzer to determine the quality of your network’s coverage.

It’s not uncommon to use your neighbor’s internet service. The widespread use of WiFi makes it easy to get on any nearby network. It can come in handy if you’re having trouble with your service, can’t afford it, haven’t connected yours yet, or just don’t want to take the time to get your own.

While you should never use your neighbor’s WiFi without permission, some don’t set a password on their router, making it easy to use remotely. I don’t recommend this because it may be considered stealing by some.

There is a proper and polite way to use your neighbor’s internet. If you stick to proper etiquette, it will work out best for everyone in the end.

Proper etiquette

Your neighbor pays for his internet service. You might think it makes no difference when you use it. In some cases this will probably not be the case.

But they can also be a heavy data user — for example, a gamer or someone working from home. If so, you’re consuming their bandwidth and possibly slowing down their service. This is one reason to make sure you have a password-protected network.

Since most WiFi networks are password protected, you won’t be able to connect unless you’re an excellent hacker and bypass their security. Let’s assume you’re not. If you need to connect to your neighbor’s WiFi for any reason, it’s best to just ask. Explain your situation and let them know why, how much and how long you want to use their system.

You could offer to pay them, do some tasks for them, or give them something in return for using their service. If you approach the situation this way, you’ll get much better results – you won’t be seen as a bandwidth thief. You’ll know what you’re doing, which is way better than stealing WiFi under a blanket of deception.

Problems using your neighbor’s WiFi

So you’ve finally found that friendly neighbor who’s willing to let you use their WiFi. This is excellent news!

If you’re sharing WiFi, there’s a good chance you’ll encounter some problems. Your router may be far away from your computer. If not, concrete walls, appliances, metal ducts, or other obstructions could be affecting the signal. Here are some problems you are likely to encounter:

Weak signal

A weak signal will be the most common problem, especially if your houses are far from each other. WiFi can only travel a limited distance. Manufacturers must design wireless routers with these limitations; it is an FCC requirement. They are enforced to limit bandwidth usage and prevent signals from interfering with each other.

You can still use a weak signal, but it will be unreliable. You’ll also notice slower data speeds, making it difficult to stream or transfer large data files.

dead spots

Since the signal from your neighbor’s router has to pass through several obstacles, you’re likely to have some dead spots – areas where the signal is completely blocked. If you’re already online and hit a deadlock, your WiFi will drop.

Unless you have tiny houses that are close together or live in an apartment, you are bound to see dead spots in some areas of your home.

overcrowding

If your neighbor has a WiFi service to share, they use it themselves. If their family uses it, and possibly yours too, the band and even the service itself can get crowded.

A WiFi band has a limited bandwidth. Once too many devices use it, it will slow down. The router must take turns to ensure that all requests from the devices are processed. Once it’s crowded, you’re basically waiting in line to use those resources. The result? Sluggish speeds and dropped connections.

This not only affects your service, but that of your neighbors as well – and they won’t be happy about it. It’s a sure-fire way to quickly get your neighbor to change their mind about sharing their high-speed data.

Here’s how to improve your neighbor’s WiFi signal

Fortunately, there are a few things you can do to help alleviate these problems. While it’s not the same as having your own internet, it could work well to meet your needs.

Improvements can be made in two areas: First, on your side or on the receiving side. Second, your neighbor’s side or the transmission side.

things you can do

Let’s start with techniques that improve the receiving side. Remember, you’re using your neighbor’s service, not yours. Here’s what you can do on your end to improve reception.

1. Install the latest adapter drivers on your device.

Look at the WiFi adapter on your device and make sure it has the latest drivers installed. Up-to-date software for your device ensures that you have the latest version that will allow your wireless hardware to work at optimal performance.

2. Use a suitable WLAN adapter.

Look at your laptop’s wireless adapter. If it’s an older or built-in adapter, it may not have the range that many newer devices have. Some new high-end wireless hardware can capture weaker signals more effectively.

3. Remove obstacles.

There may be obstacles between you and your neighbor’s router. If so, you may want to move them or drag them to a different location when using their WiFi. If your car is parked between you and the router, it can interfere with the signal or even turn it off altogether.

4. Choose the best band.

No, I’m not talking about your favorite music group. I am referring to the best wifi band. WiFi signals use either the 2.4 GHz or 5 GHz band.

While 5GHz has higher data transfer speeds, it is not as powerful as the 2.4GHz band. 2.4 GHz is stronger due to its lower frequency and most importantly it can travel longer distances. It is also better to traverse obstacles such as walls or trees.

Since the 5GHz band is faster, your neighbor will most likely be using that one, which means it can get crowded too. You may find more space and better speed in the 2.4GHz band.

5. Install a repeater or extender.

If all else fails, you can always install a repeater or WiFi extender. A repeater picks up the signal, amplifies it, and then rebroadcasts it, giving you full-strength WiFi throughout your location. These devices are readily available and very inexpensive.

Just find a spot in your house where you can get a decent signal from your neighbor’s WiFi, then install the extender. They are usually just plugged into an outlet. Connect the extender to the wireless network according to the instructions and you’re good to go. With a properly installed repeater, you should be able to access the signal throughout the home.

Things Your Neighbor Can Do

Whatever your agreement with your neighbor, it’s awkward to ask him to do too much. After all, they’re doing you a favor; You definitely don’t want to wear down your reception. If you pay them or are trusted friends with them, you can convince them to try some of the tips below. Remember that the relationship is more important than your internet!

1. Move the router closer to your home.

If it’s not too difficult and doesn’t cause problems for your neighbor’s reception, you can ask them to put their router on the side of the house closest to yours. You don’t want to make them avoid each other – but if it’s an easy move for them, it might be worth considering.

2. Install the latest firmware on your router.

It’s always a good idea to update to the latest software. It will help improve your neighbor’s connections and ensure their network continues to function smoothly. Updates can sometimes even provide better range and reliability for everyone using the network.

3. Remove obstacles.

If they have large obstacles between you and their router, it can affect your signal. If it’s not too much trouble, have them remove what’s blocking the wifi. Again, however, you don’t want to ask them to do something that causes a lot of inconvenience.

4. Get a high-end router.

This can be a stretch. If you have an outdated router with old technology, it will be difficult to establish a solid connection. You could try splitting the cost for a top-of-the-line router that offers faster speeds and consistent WiFi for everyone. Read our round-up of the best home WiFi routers to learn more.

5. Install a repeater.

The options listed above may not be practical. In this case, it may make sense to install a repeater or extender closer to or on your property. That in turn costs money. You can buy the extender yourself and then help him install it in a place where you both get the best possible signal.

More: Simple Wi-Fi tips to improve your internet speed during lockdown

last words

Using your neighbor’s internet – with their permission, of course – can be a huge advantage. It can also be a plus for them if you compensate them in some way.

Due to the distance between living rooms, you may need to take a few steps to improve your neighbor’s WiFi signal. Just remember not to be intrusive and think of your neighbor as you work with them to improve or expand their network.

We hope these tips can help you. We’d love to hear some of your stories about internet sharing and things you may have done to improve WiFi signals.

Even when you’re not connected to the internet, you can still do many things with your Chromebook.

Important:

Some offline apps and services don’t work in Incognito or Guest mode.

If you use Gmail with your work or school account, you can ask your admin to help you change your offline Gmail settings.

Check your inbox

You can read, reply to, and search your Gmail messages even when you’re not connected to the internet by visiting mail.google.com. How to set it up:

Open Chrome. Important: Gmail offline does not work in Incognito mode. Go to Gmail offline settings. Check “Enable offline email”. Choose your settings, e.g. B. How many days of messages you want to sync. Select Save Changes. To use Gmail when you’re not connected to the internet, go to mail.google.com.

Important: If you send email offline, your email will be moved to a new Outbox folder and sent when you come back online. Learn more about using Gmail offline.

Play movies, music or games

First, buy a movie or TV show from Google Play Movies. Download a show Next, download your movie or TV show to your Chromebook: Select the launcher in the corner of your screen. Select the Google Play Movies app. Select My Movies or My TV Shows. Select Download next to the movie or TV episode you want to download. The download icon will fill in red to show your download progress. You can watch your video offline once the download icon turns into a check mark. If downloading doesn’t work, learn how to troubleshoot video download problems. Watch offline To watch a movie or TV show when you’re not connected to the internet, open the Google Play Movies app . To remove a video, select Downloaded .

The YouTube Music Android app.

A YouTube Premium subscription.

Learn how to download music for offline listening. YouTube Music for Chromebook does not support offline playback. To listen to music offline you need:

First find and install games that can be played offline: Go to the Chrome Web Store. Select Games on the left. Select the Runs offline check box. Many games work offline, such as Cut the Rope and Cube Slam. If your Chromebook works with Android apps, you can also search for offline games in the Google Play Store app. To find an installed game: Select the launcher in the corner of your screen. Open the game.

take notes

Google Keep lets you take notes offline. If you’ve already made notes, you’ll need to save them first so you can read and edit them offline:

Make sure your Chromebook is connected to the internet. Select the launcher in the corner of your screen. Open the Google Keep app. Wait a few minutes. Your Chromebook automatically saves your notes so you can see them offline.

After your Chromebook saves your notes, you can edit them or write new notes offline. Any changes you make will show up in Google Keep the next time you’re online.

Other tasks you can do offline

It is unlikely that someone will actually take your IP address and use it as their own. However, some people have access to your IP address and may collect data associated with it. For example, your ISP can see which websites you have visited on the Internet at any time. In the meantime, the websites you visit can track your location and actions in order to tailor their offerings. When you search for flights, the website can recognize that you are surfing from a wealthy European country, for example, and therefore automatically increase the prices.

If you have an older PC, at some point you may want to upgrade your operating system. An updated operating system can make your computing experience smoother, enabling you to complete your daily tasks faster.

So let’s say you’re currently stuck with a Windows 7 operating system on your PC, but you want to load and run Windows 10 using a USB device. How you do that?

Fortunately, the days of using discs to boot software are long gone. Today you have a much more convenient option: you can boot directly from a USB drive. USB booting Windows 10 is not as complicated as you might think.

We’ve broken down the steps in this easy-to-use guide so you can be enjoying your new software in no time.

Before you start

As you may already know, an operating system is crucial to keep your computer systems running.

It helps to process and manage your PC’s memory, as well as its software and hardware. It also allows you to communicate with the computer, allowing you to perform behind-the-scenes tasks. [1]

An older operating system doesn’t mean the end of the road for your computer, but at some point you will no longer receive security updates and no longer receive support. So in most cases it is in your best interest to upgrade.

USB drive

Before booting from your USB drive, like any other DIY project, you need to prepare yourself with the right knowledge and materials.

First, you should invest in a USB flash drive with at least 16GB of storage space, which should give you some breathing room in terms of storage. However, if you can invest in a 32GB USB drive, that’s an even more optimal amount of storage space for this project.

license

Next, you want to purchase a license to run the Windows 10 operating system. You can either purchase a Windows license directly or simply use one you already have under your account. After that, use a Windows USB utility to configure the USB drive with Windows 10.

One disadvantage of booting Windows 10 from a USB device is that the operating system will be slower than running from your regular hard drive. Despite that, it’s still a good option if you want a new operating system.

Not sure how to configure your USB drive? Microsoft conveniently offers Windows to Go, which allows you to easily create a bootable Windows USB drive.

Unfortunately, Windows To Go is only compatible with the Education and Enterprise versions of Windows 10 and requires an official Windows To Go drive to work [2]. There is also another option called WinToUSB that can create a bootable drive from any USB and any operating system.

Now you can proceed to actually boot your Windows 10 operating system from your USB flash drive.

How to boot from USB Windows 10

1. Change the BIOS order on your PC so that your USB device comes first

In most cases, the BIOS is not usually automatically set for your device. If you skip this step, your computer will periodically boot from your hard drive instead of getting boot information from your USB device.

Pro tip: The BIOS on many computers will have the USB boot option as USB or Removable Disk, but some may list it as a hard drive choice as well. So if you’re having trouble finding your device, you might need to do a little research. The BIOS on many computers will have the USB boot option as USB or removable disk, but some may also list it as a hard drive choice. So if you’re having trouble finding your device, you might need to do a little research.

One more note: Are you trying to figure out how to boot from USB from BIOS? After you change the boot information in your BIOS order priority list, your PC will look for new boot information every time it boots.

You can leave your computer configured with the new settings, which shouldn’t cause any problems unless you plan to leave the bootable USB device in your computer permanently.

2. Install the USB device to any USB port on your PC

While it may seem like you should just copy files to the drive and be done with it, that’s not quite the case. You must first burn an ISO file to a USB drive.

An ISO file or ISO image is basically a way of consolidating many files and folders into a single file [3]. They always end with the file extension: .ISO. ISO files are a convenient way to copy entire programs and software.

Note: Creating a bootable flash drive or learning how to configure an external hard drive for bootability is another DIY task that may take you some time to solve.

3. Restart your PC

At this point in the process, you are not changing anything within the operating system. So that means the reboot process is a bit different. Instead of the regular reboot buttons, the BIOS should tell you which button to press.

It may be F10 for example, but follow your BIOS instructions so you can safely save your boot order changes and then restart the PC.

4. Look for the message “Press any key to boot from an external device” on your display

Sometimes USB drives provide a message that a key needs to be pressed before the PC will boot from your USB device. If this occurs and you do nothing, your PC will look for the next boot option in the BIOS order. In most cases, the next option would be your hard drive.

Note: If you boot from a USB drive, you may not see a key press message. It is usually a self-starting process.

5. Your PC should boot from your USB drive

The next steps depend on what you are using the bootable USB device for. If you try to start Windows 10 from your USB device and you have taken all the necessary steps, the operating system will simply start and you can use your device.

From start to finish, this process is expected to take around 10 minutes. [4]

Troubleshoot booting from USB drive

If the above steps to boot Windows 10 from a USB flash drive didn’t work, see the guide below to troubleshoot issues. [5]

1. If your new operating system did not load from your USB device, the first step is to recheck the boot order in BIOS. This is the most common problem you will come across. Before anything else, verify that the BIOS is properly configured.

2. If you cannot find the “USB device” in the BIOS sequence, it may have a different name. One issue to note is that if your computer was made around 2001 or earlier, it may not be able to handle the USB drive boot process.

However, if your computer is on the newer side, the USB device is probably labeled differently in the BIOS list, e.g. B. as removable media.

3. Take out your other USB storage devices. If you have other ports on your computer that are occupied by USB devices such as external displays or wireless mouse receivers, they could affect your computer’s ability to handle your USB device and boot your new operating system. Uninstall the other USB devices and try again.

Power User Tip: If you are using multiple bootable devices connected at the same time, your PC may have started the wrong drive. In this case, uninstall all USB devices unless you need one for your computer.

4. Copy the files again to your USB device. If you created a bootable flash drive, repeat the steps you used to create it originally. You may have accidentally skipped a step or did something wrong that made the flash drive incompatible.

5. Use a different port on your PC. Sometimes the BIOS on one motherboard only checks certain USB ports, so try a different one and restart your PC if you have problems.

Installing a new operating system doesn’t have to be difficult

With the right equipment and information, you’re well on your way to enjoying a Windows 10 operating system that boots from the comfort of your USB drive.

In some cases, you can also install an operating system from a disc, but this is generally considered an outdated installation method. USB drives offer a convenient option for installing software due to their larger storage capacity.

However, note that the USB device you decide to use should be free of important files, as any existing files will disappear once you burn an ISO file to it. Be sure to save or backup any important files to the cloud or external hard drive before using it.

If you’re nostalgic for an old operating system, you’re in luck. The iconic Windows 95 operating system is actually available as an app. [6]

Whether you are trying to upgrade your system or enjoying a throwback operating system, a great operating system can make all the difference in your computer.