Hair Extension Bond Remover? Top 50 Best Answers

How to remove keratin bonds

Equipment needed:

Tongs

Solution – the one we use in the salon is the Balmain remover (pink gel)

Keratin bonds last 3/4 months and since you don’t usually have the bonds you don’t have to worry as much about where to start. Although cutting the hair makes the process easier and cleaner.

First you want to squeeze the binding with the pliers to crush the binding to break it – if the binding doesn’t break easily you need to use the solution gel remover. Be sure to use the gel remover if the bond is still tight/a thick bond on the hair.

After breaking down the keratin bond, you want to support the natural hair by holding it by the root and gently pushing the bond and extension away.

Once the bonding and extensions have been removed you will need to comb out the old hair that has fallen out and built up over the months you have had extensions – this is perfectly normal when removing extensions

Removing an entire head of bindings takes over an hour on average. Please take your time, remove slowly and gently so as not to damage the hair…

Oh no! Pinterest only works if you enable JavaScript.

Enter the characters you see below

Sorry, we just need to make sure you’re not a robot. For best results please make sure your browser accepts cookies.

When you want to get some hair extensions put in, it can be overwhelming to decide which one to go for. There are many different application methods, each with their own advantages and disadvantages. In this post I’ll look at one of my favorite types of extensions – pre-glued hair extensions – and I’ll explain the pros and cons of using them to help you decide if they’re right for you or not.

What are pre-bonded hair extensions?

Pre-glued hair extensions are attached to your hair by using a heat gun to tie the extension to your hair. The binding is made of keratin, a safe natural binding agent that does not harm your hair. Make sure you buy your extensions from a trusted retailer as inferior quality extensions are made from adhesives that are harder to remove without damaging your hair. Pre-tied hair extensions are one of the most popular types of hair extensions and have survived despite the introduction of newer types like micro loop extensions.

The term prebonding is derived from the keratin bond at the end of the strand of hair. Pre-Glued Extensions are also commonly referred to as Utip or Nail Tip Extensions, this is exactly the same thing. The “u” in utip refers to the “u” shape of keratin, which also looks like a nail. Wand tip hair extensions are also a type of pre-tied extension.

Pros of Pre-tied Hair Extensions:

Strands mean you can easily add a mix of colors to add accents

They last for several months and are therefore good value for money. You can go up to 6 months without an exchange.

Does not require regular maintenance

Available in 100% human hair.

Usually available at a lower price per strand than other types of hair extensions.

If your hair extensions are still in good condition at the time of regrowth, you are approximately ready to use your extensions. Before you can do this, your stands will need to be re-taped by a professional.

Disadvantages of pre-bonded hair extensions.

When hairs are pulled out of the strand, they are permanently removed.

The application required special equipment as the adhesion promoter requires heat to melt.

Removing the extensions requires a special removal solution to break down the bonding agent. It is best to consult a professional hairdresser to remove them and avoid damaging your hair.

Oil products should not be used on the bindings as they may degrade the keratin and loosen the binding.

Where the bond is, your hair is not as soft as natural hair.

Hopefully this gives you all the information you need to decide if this is the right hair extension for your needs. I’ve had good experiences with them in the past and I think they represent excellent value for money. What do you think? Feel free to leave a comment below about your favorite type of hair extensions!

The best guide to tape in hair extensions pricing!

Fee per Panel – “Panel” is classified as “two tape shots installed together”. The average salon charges between $30 and $40 per panel (including the cost of the hair). Each panel takes about 1 minute to install and is a great way to boost your ticket. It also gives your clients the fullness/length/highlight they are looking for without the use of chemicals. The average full head requires about 20 records. The cost of the service – the price of the service is determined after consultation with the customer. After the consultation, the hairdresser should know how much hair needs to be ordered, how long and how long it will take.

On average, for a full head, the customer needs four packs (40 pieces). The average ticket for the service is $600-$800 (4 packs, 18 inches long).

The Hair Cost & Hourly Rate – Some salons like to charge the client for the cost of the hair and add an additional installation fee for the hair extensions. For example, if the hair was $250, the salon will add $150 to apply the full head of tape-in ​​hair extensions.

All prices include haircut and style of hair extensions.

Removal and Reapplication

So you’ve started offering tape in hair extensions in your salon and are wondering how much to charge your client. This is one of the most frequently asked questions we receive from our hairstylists who are entering the world of tape in hair extensions salon menu prices. What do other salons in your area charge for hair extensions? Client should come in every 6-8 weeks for hair extension reapplication. Where the barber reuses the hair extensions. Cost is for Retape tabs, remover and labor only. Many salons charge an hourly rate of $60 to $75 to remove and reattach the extensions.

Removal video here or see video at bottom of page

Keratin (aka fusion) hair extensions are the type of extensions that are applied with a hot fusion tool or flat iron. The extensions themselves are already provided with keratin. (I’ve heard of some people using a flat iron to apply, but they’re too wide to do a good clean job). I will add a new application video soon. Here is an application video I made 12 years ago but is still valid

Remove systematically, choosing a row to remove and clipping any other hair out of the way (I usually start at the nape of the neck, but anywhere is fine).

Add a generous amount of D-Bond Gel to all keratin bonds in the row. D-Bond Gel is thick, which helps it stick and break down the keratin.

Take 3-4 ties and start popping them with the Pro Removal pliers.

As soon as they start to break, add a few drops of the eye sight remover solution and break again.

Keep adding remover and cracking until the keratin is completely crumbled and the extensions pull out easily. (either save this hair or throw it away – check out my re-tipping video in April 2020)

The Vision Removal solution is stronger than D-Bond gel which gives the removal a kick. Once the extensions are removed you may find tangles and tangles over where the ties used to be. That is normal.

Use a good detangling spray in this area and gently comb out the tangles with a fine-toothed comb. I occasionally use a T-pin to get into tight “dreads” that sometimes happen. The more care you take in removing the tangles without breaking the hair, the better your hair health will be.

I recommend having your extensions removed by a professional, but they can also be removed at home.

If you’re doing a house move, take your time and work on a few bindings at a time, resting your arms in between. If you have a loved one to help, even BETTER!

As I write this during the Covid-19 pandemic, I realize that many people need to have extensions removed but are unable to go to a salon because they are closed.

1. You can use either D-Bond Gel or Vision Removal Solution, you don’t have to have both, but using the two together works best.

2. Professional hair removal pliers work best, but you can use regular pliers in a pinch (just don’t use the cutter to cut your hair).

3. DO NOT reheat the keratin or push it out of your hair. You can remove the extension this way but you will leave a thin trail of melted keratin which is very difficult to remove and will prevent you from combing out dreads/tangles.

4. Give yourself time. It may take professional 1-2 hours for removal, so expect it to take longer if you do it for yourself.

5. The longer the extensions are in, the easier it is for the keratin to break down, but tangling can be worse after they’ve been in for a long time.

6. Most modern hair extension companies use keratin which is removed with an alcohol based remover. In a pinch, you can use 91-99% isopropyl alcohol. (70% rubbing alcohol is not strong enough)

7. Rare: Some old-fashioned lengthening applications use a keratin that is broken down with acetone (nail polish remover). If you start removing your extensions and instead of the keratin starting to crumble, they become “sticky” then you are wrong remover. Go to the drugstore and get a bottle of acetone nail polish remover. Place in a spouted bottle and try again using only acetone. If your extensions were attached with a glue gun, they will likely require acetone to remove. Acetone will not work on extensions that require an alcohol-based remover.

Warning! All of the above removers are flammable!

I hope this information helps! Lynn

As much as we would like to keep our beloved hair extensions on our heads permanently, there will surely come a time when we need to remove them. These products are meant to be used for a period of time, after which we need to give our natural curls a rest for a period of time to avoid hair damage and other hair problems caused by improper use of extensions. To ensure your natural curls are not damaged, get your extensions here at Human Hair Extensions Online. We offer premium hair products that are proven non-damaging.

When applying hair extensions it is recommended that you seek advice from a professional hairstylist to ensure they are applied correctly and securely. Although there are some types of extensions like clip-ins that you can install yourself with the other types, professional help is a must. On the other hand, removing hair extensions without expert help is perfectly fine as long as you do it carefully while keeping the health of your tresses in mind. Here are simple tricks you can use to keep your mane safe and damage free during hair extension removal.

For tape ins

Adhesive Remover When installing tape-in ​​hair extensions, you should be prepared to have an adhesive remover that is specifically designed for tape-in ​​extensions. True to its name, it is a product used to remove tape hair extensions and the residue left behind, thereby ridding your roots of sticky adhesive materials. HHEO offers XTEN Tape Hair Extensions Adhesive Remover/Solvent that is completely safe for your hair and skin. Unlike other products, it does not damage the hair and it is very easy to use, since we also include the instructions for its effective use.

However, we also understand how difficult emergencies can be. In case you find yourself in a situation where you need to have your tape in hair extensions removed and don’t have a tape or glue remover handy, you can try some of these tricks, although we cannot guarantee the same results as glue removers would actually do developed for such cases.

Use natural oil for zero damage

If you don’t have a remover, you can do it naturally by using hair oils as an alternative. Instead of using chemical-based products, you can opt for natural oils that are healthy for your strands. You can use any of these: coconut oil, olive oil, almond oil, or baby oil. Apply to the roots and leave on for at least 15 minutes to allow the oil to seep through the bonds. The oil will break the tape bonds, allowing you to easily detach the tape wefts from your mane. However, using oil may take longer to completely remove the product and any residue than using a regular remover. It takes about an hour to complete the removal process.

If oil isn’t around, use peanut butter

If you’re in a pinch and can’t find oil around the house, you can use peanut butter instead. Apply and leave on head for at least 30 minutes. Peanut butter’s natural oil can break down the glue and tape bonds in the same way that almond oil or baby oil can.

Alternatively, use an acetone-free nail polish remover

If extension remover or oil is not available, you can use nail polish remover. Just make sure it’s acetone-free. Apply a few drops of the product to the sides of the tapes. If you notice the tape starting to peel off your mane, slowly peel it off, starting at the edge. If you feel it is difficult to peel off, add more nail polish remover.

Rinse hair thoroughly, condition and wrap in a towel

If the extensions still won’t come off after applying the oil or remover, shower and rinse your curls thoroughly. Apply a generous amount of conditioner, then wrap a towel around your head. Wait about 20 minutes to allow the conditioner to soak in and break down the chemical bonds in your tape.

Comb through your tresses patiently and gently

Gently comb your tresses until the extensions come loose. Start combing at the tips and work your way gently to the roots. This will prevent your extensions from tangling with your natural curls.

Removal video here or see video at bottom of page

Keratin (aka fusion) hair extensions are the type of extensions that are applied with a hot fusion tool or flat iron. The extensions themselves are already provided with keratin. (I’ve heard of some people using a flat iron to apply, but they’re too wide to do a good clean job). I will add a new application video soon. Here is an application video I made 12 years ago but is still valid

Remove systematically, choosing a row to remove and clipping any other hair out of the way (I usually start at the nape of the neck, but anywhere is fine).

Add a generous amount of D-Bond Gel to all keratin bonds in the row. D-Bond Gel is thick, which helps it stick and break down the keratin.

Take 3-4 ties and start popping them with the Pro Removal pliers.

As soon as they start to break, add a few drops of the eye sight remover solution and break again.

Keep adding remover and cracking until the keratin is completely crumbled and the extensions pull out easily. (either save this hair or throw it away – check out my re-tipping video in April 2020)

The Vision Removal solution is stronger than D-Bond gel which gives the removal a kick. Once the extensions are removed you may find tangles and tangles over where the ties used to be. That is normal.

Use a good detangling spray in this area and gently comb out the tangles with a fine-toothed comb. I occasionally use a T-pin to get into tight “dreads” that sometimes happen. The more care you take in removing the tangles without breaking the hair, the better your hair health will be.

I recommend having your extensions removed by a professional, but they can also be removed at home.

If you’re doing a house move, take your time and work on a few bindings at a time, resting your arms in between. If you have a loved one to help, even BETTER!

As I write this during the Covid-19 pandemic, I realize that many people need to have extensions removed but are unable to go to a salon because they are closed.

1. You can use either D-Bond Gel or Vision Removal Solution, you don’t have to have both, but using the two together works best.

2. Professional hair removal pliers work best, but you can use regular pliers in a pinch (just don’t use the cutter to cut your hair).

3. DO NOT reheat the keratin or push it out of your hair. You can remove the extension this way but you will leave a thin trail of melted keratin which is very difficult to remove and will prevent you from combing out dreads/tangles.

4. Give yourself time. It may take professional 1-2 hours for removal, so expect it to take longer if you do it for yourself.

5. The longer the extensions are in, the easier it is for the keratin to break down, but tangling can be worse after they’ve been in for a long time.

6. Most modern hair extension companies use keratin which is removed with an alcohol based remover. In a pinch, you can use 91-99% isopropyl alcohol. (70% rubbing alcohol is not strong enough)

7. Rare: Some old-fashioned lengthening applications use a keratin that is broken down with acetone (nail polish remover). If you start removing your extensions and instead of the keratin starting to crumble, they become “sticky” then you are wrong remover. Go to the drugstore and get a bottle of acetone nail polish remover. Place in a spouted bottle and try again using only acetone. If your extensions were attached with a glue gun, they will likely require acetone to remove. Acetone will not work on extensions that require an alcohol-based remover.

Warning! All of the above removers are flammable!

I hope this information helps! Lynn