Handyman To Put Up Shelves? Top 50 Best Answers

Whether it’s in a closet, an alcove or nook in the home, or even existing closets, built-in shelves are a smart way to maximize storage space and organize the home. Costs vary widely depending on the amount of shelving needed, the materials used, and the overall design.

For example, the range of wood species a homeowner can choose from when having built-in shelving made can range from Birch and Maple to Pine, Cherry and Red Oak and more. The choice between woods must be based on the resilience required, as well as aesthetics and function. This is because some built-in shelves are meant to serve as bookshelves while others are meant to appear in open areas like the dining room.

Built-in Shelves: 10 linear foot shelves.

Item Unit Cost Quantity Line Cost Materials: Stronger woods that don’t sag are cheapest, while premium or decorative materials are much more expensive. $70 to $180 per linear foot 10 $700 to $1,800 Labor (carpentry/installation) $70 per hour 12-17 $840 to $1,190 Total cost $154 to $299 per linear foot 10 $1,540 to $2,990

Other Considerations and Costs

If the project involves more than the basics, the cost will increase with each addition or improvement. Drawers, for example, average more than $200 for materials and labor. Adding doors turns the project into a built-in closet that costs more than $200 per set of doors and over $400 if the doors are made of special materials like glass.

each for material and labour. Adding doors turns the project into a built-in closet that will run more than per set of doors and above if the doors are made of special materials like glass. Glass shelving isn’t usually an option for custom built-ins, but when it is an option, the cost of materials will double.

If the fixtures exceed the average height of 8 feet, their price increases by 35% to 50%.

Lighting isn’t a typical addition, and it comes at a premium, too, with fixtures and fixtures costing upwards of $50 on average.

. If the shelves are painted to match the surrounding space, the cost can increase significantly.

DIY Considerations

While it may seem that built-in shelving is an obvious DIY project, the reality is that building shelving is considered unsafe, error-prone, or can become a risky endeavor. Even if you buy prefabricated built-in shelving, it is best to hire a professional to assemble and install it professionally and safely.

references

At Middlesex Door Systems we know all about garage doors and a lot about garages. Here’s some great advice on how to make your garage a place you’ll be proud of. Shelves make garage organization quick and easy, ensuring you can find things when you need them. You have the option to make your own shelves or buy ready-made options that you just need to install. To help you decide which option is best for your needs, check out the pros and cons of each option.

DIY pros and cons

Building your own shelves may be beneficial for some, but it may not be the right choice in every situation. The advantages of DIY shelves are:

Lower Cost – In general, buying the materials for your garage shelving should be cheaper than buying pre-made parts – just make sure you get it right the first time.

CUSTOM MADE – Building your own shelving means you can build shelving that’s exactly what you need. You can customize the design to suit your space and the items you need to store.

Durability – As long as you choose quality materials and solid design, your DIY shelves will be more durable.

Direction – You can find many different guides for a variety of options by searching the web, making the process easy – even for a beginner.

Proud – You can be proud that you built everything yourself

While there are several advantages to building your own shelves, there are also some disadvantages to be aware of:

Increased Difficulty – Crafting your own items is harder than just buying pre-made options.

Time Consuming – DIY takes more time as you need to buy materials, take measurements and build them.

Potential Additional Costs – You may need to purchase additional tools for the process.

Buy ready-made shelves

Buying shelving may or may not be your best option, depending on your needs, skills, and available space. The advantages of prefabricated or prefabricated garage shelving are:

FASTER AND EASIER – It’s much faster to just buy your shelves so you can hang them right away, which doesn’t require any serious design skills.

Flexible – Prefab shelving tends to be modular so you can add extra storage as needed.

Like DIY shelves, ready-made options also have some drawbacks:

Increased Cost – Buying shelves is more expensive than buying the materials to craft them.

Durability – Don’t forget that you get what you pay for – if the shelves are cheaply made they may not offer the strength and durability needed for long-term use.

Adjust it – you will lose some adjustment skills, so make sure you take lots of measurements and consider what to keep.

More DIY garage shelving considerations

There are a few things you need to consider before deciding to make your own shelves:

Time – Make sure you have enough time to set up your shelves in a day or two to avoid cluttering up your garage.

Trash Cans – While some ready-made options come with trash cans, remember you can buy them yourself cheaply and find a DIY guide for this style.

The DIY vs. finished product decision is yours. Whichever option you choose, be sure to measure everything twice to avoid extra expense and hassle.

To complete a well organized garage, why not a new garage door? At Middlesex Door Systems we can show you the possibilities. Call us at 1-800-696-1926!

Why we like TaskRabbit

This allows you to compare options

TaskRabbit allows you to compare services and prices across multiple Taskers. Unlike the challenge of getting estimates for full-service moving, TaskRabbit gives you all the information in one place and even lets you read Tasker reviews. It’s hard to overstate how helpful it is to see a list of all your bids at once. You say what you want to do and then select a price from the offers received. It’s that simple. There are four steps to getting a quote: 1. Provide your current address. If you move, you also have the option of entering your new address. 2. Enter the size of your task. Small Charge: One hour or less

Medium load: Two to three hours

Large Charge: Four hours minimum 3. Select your Tasker vehicle requirements. Not required

Task requires a car

A pickup truck is required for the task. 4. Provide the details of your move. For example, “I need help moving my studio to the other city.” Once you’ve entered your answers, you’ll be presented with a list of Taskers in your area. When you click on each Tasker profile, TaskRabbit will show you the following information: Profile picture

organic

tenure as Tasker

Availability

reviews

hourly rate

Features and additional services (e.g. if they offer next-day assistance)

Vehicle Type Note: Top-rated Taskers appear first in the search results order, so you can review your options from top to bottom based on who has the best customer ratings. We encourage you to read Tasker reviews carefully and pay attention to their ranking. If a Tasker is highly rated and has done some jobs, the chances are pretty high that you will have a good experience.

Pro Tip Look for the teal “Great Value” button on a Tasker’s profile. This suggests that the Tasker has a lot of solid reviews. The Tasker Profile also shows if they are an “Elite Tasker,” meaning they have good ratings AND complete a high number of jobs.

It checks its Taskers

TaskRabbit screens all potential Taskers much like a full-service moving company screens its employees, including verifying each Tasker’s identity and background.2 The process is similar to that used by on-demand services like Uber and Lyft — but TaskRabbit goes one step further and interviews each candidate. When a Tasker makes the cut, its status on the site depends on user ratings. Taskers need a combination of experience and good ratings to stay on TaskRabbit. If the experience or quality goes down, their ranking on the site goes down as well. Over time, they rise to the top or may disappear from the list altogether. By the time a Tasker replies to your offer, you know they’ve been vetted by both TaskRabbit and the people who hired them. Of course, no matter how high a Tasker is ranked, problems can creep in. Taskers could potentially show up late, not deliver the promised services, or even be unprofessional. These are risks that come with hiring Taskers by job rather than full-service movers. Your risk cannot be completely eliminated, but TaskRabbit makes impressive efforts to give you as much information as possible.

Professional assembly of IKEA furniture

Have you ever found yourself in the middle of your living room surrounded by cheating IKEA furniture pieces? We also. That’s why we appreciate TaskRabbit’s IKEA furniture assembly services. Thanks to a direct partnership with IKEA, you can hire Tasker to assemble your furniture when you shop online or in an IKEA store. If the hardest part of buying furniture is assembling it back home, then outsource that process to TaskRabbit. IKEA furniture assembly services start at $27 per item and increase based on the difficulty of assembly.

TaskRabbit assembly costs for IKEA furniture

IKEA furniture item TaskRabbit Assembly cost Dresser with drawers $27-80 Wardrobe $36-350 Desk $45-90 Bed frame $72-90

Data as of 11/07/2019. Hourly rates represent the average of all bids to the nearest dollar for the services offered in Houston, Texas. Offerings and availability may vary by location and are subject to change.

TaskRabbit offers furniture assembly regardless of brand, but you can expect to pay more for the same job if the furniture doesn’t say IKEA on the box.

Same day option

As good as it is to plan ahead, sometimes circumstances—your friends are going out on bail, or you don’t have time to clean—allow you that option. TaskRabbit is great for last-minute help with its same-day service. Once you’ve selected a task, TaskRabbit will ask you about your schedule (basically when your task needs to be completed) and give you an option for same-day service. Just schedule the time you need help and wait for same-day taskers bids. Expect to pay more for a faster service, but know it’s available when needed.

Let’s face it, you never wanted to read these furniture assembly instructions. No matter how the instructions are laid out, furniture assembly isn’t necessarily a user-friendly task…but it’s a Tasker specialty! Taskers often assemble beds, bunk beds, dressers, desks, sofas, tables, chairs, closets – you name it.

As IKEA’s official furniture assembly partners, Taskers are familiar with popular IKEA furniture collections such as MALM, KALLAX, HEMNES and more. You can fill your space with exactly what you want no matter how complex the furniture is.

Taskers bring their own tools so they can help you as quickly and efficiently as possible. TaskRabbit also offers furniture disassembly services, and Taskers can help you move or haul away your old furniture!

Furniture assembly does not have to be a big effort. Taskers can assemble furniture in a snap, saving you time and effort. Don’t do everything alone. Task only!

So you want to hang something on your wall, but how do you securely mount it there without causing damage? How are you going to hang that ceiling fan without the whole roof collapsing? How do you make sure the gallery wall looks really beautiful and not like a mess?

If you have ever asked yourself these questions, rest assured that you are not alone. Not only are many of your neighbors probably wondering the same things, but you also have other neighbors, Taskers, who are nearby and will help you mount and install things on your wall.

With the right tools and expertise, Taskers can help you assemble everything from lights and pictures to flat screen TVs and ceiling fans quickly and safely.

No tool? No problem.

The provision of tools is optional. Taskers usually provide their own tools to get the job done.

TV assembly services.

Your Tasker can help you install your TV wall mount and mount your TV on the wall. If you’re not sure if your TV is compatible with your mount, your Tasker can help.

Out with the old, in with the new.

Taskers can help you haul away your old TV and brackets, and if you need your Tasker to pick something up at that hardware store, just let them know!

Same day services available.

TV arrive early? Taskers are generally available for same-day services, so you can hang them on the wall whenever you’re ready!

Before you hang anything, it’s important to find out what your wall is made of. Ideally, you should attach floating shelves (or anything else you hang) to a wall stud, as this will give you the most supportive base for your project. A stud finder — a handheld device that uses a magnet to detect metal, such as nails and screws, in your home’s wall studs — can help you locate them.

Need help? Receive free, no-obligation project estimates from qualified professionals in your area. Find professionals now +

Installing floating shelves on drywall or plaster

But what if you want to hang a shelf in a spot without a stand? First, check if your wall is drywall or plaster. To do this, simply tap the wall with a light fist. If it sounds hollow, it’s drywall. Not hollow? Probably plaster. Another test is to see how easily a nail goes through. If it slides right in, you have drywall. If you have to knock a few more times, you’ve found either plaster or a wall stud (you can tell which by knocking on the sides of the hard area). Knowing what type of wall you are working with can help you decide what type of hardware your project will require.

Installing floating shelves on wall studs

If you’re attaching your floating shelf and bracket to a wall stud, you don’t need anchors. However, when working with plaster or drywall, additional support is required. Wall anchors, also known as molly plugs, help you build a stable foundation for your shelving. Normal cavity wall anchors work well for plaster; For drywall you will need butterfly or toggle anchors. Before you decide which anchors to buy, consider what you want your shelves to hold. Anchors are rated on how much weight they can carry, but to be on the safe side, it’s best to stay on the lower end of an anchor’s maximum weight rating.

How to install floating shelves

Measure and mark the spaces on the wall (at both ends) where the shelf will stand. Using a spirit level, draw a discreet pencil line across the wall to ensure your shelf is level. Use the hand drill to drill pilot holes for the anchors in the wall. Insert hollow dowels into the holes, following the specific instructions on the packaging. Align your bracket with the pilot holes filled with dowels. Using a regular screwdriver, attach the bracket to the wall by screwing it into the wall plugs. Slide the shelf onto the bracket.

Disclosure: We may receive commissions for purchases made through links in this post.

It can sometimes be difficult to come up with clever ways to prevent damaging the walls in your home. Want to hang some shelves but not sure if command strips or hooks will work? Well, we’ve done a lot of research on this question and we have the answers for you. Let’s get into that.

Although you can hang shelves with Command hooks and ledges, you don’t want to put heavy objects on them. Considering Command’s adhesive doesn’t typically hold more than a few pounds, adding heavy items to your hanging shelves can cause everything to fall to the floor.

However, if you use lightweight shelves and place a few small items on them, you shouldn’t have any problems.

To start, we’ll cover all of the Command products and discuss whether or not you can use them to hang shelves. Whether you are renting, looking to keep your walls hole free, or need new wall mounting ideas, we are here to help. So let’s dive right into this post!

Are Command Strips strong enough to hold a shelf?

Command strips are not strong enough to hold heavy objects. This includes hanging wall shelves. You can often use command bars/hooks for light wall pieces, so there shouldn’t be a problem if your shelf is hollow.

As we mentioned earlier, Command products typically don’t last more than a few pounds. So the fewer items you put on your shelf, the better.

Additionally, standard Command hang strips hold about four pounds, which isn’t much. On the other hand, the brand’s large strips can handle a 24-36 inch object weighing up to 16 pounds, so you might want to give this option a try.

What is the maximum weight a command strip can hold?

If you buy one of Command’s larger item hanging strips, expect it to hold 15-16 pounds. As mentioned above you will need to use one of the brand’s 24-36 inch hanging strips to have a higher weight tolerance so your shelf may not be big enough.

However, you can try trimming the larger bar to fit your wall shelf, although this may affect the load bearing capacity. Again, it can hit or miss, so use a nail if you have valuable exhibits.

Command bars for hanging large pictures

These large command strips hold up to 16 pounds, contain 14 pairs, are white, and promise to remove them without damaging your walls.

Follow this link to see them on Amazon.

Can I use a command hook to hang a wall shelf?

Yes! You can certainly try hanging a wall shelf with a Command hook. Unlike strips, you need to align your hooks to fit the nail holes on your shelves.

This is more complicated, so we recommend strips between hooks and strips. Additionally, Command hooks aren’t always as strong as wall-to-object adhesive, putting your valuable items at risk of damage.

Not every wall shelf has nail/screw holes large enough to work with a command hook so this will not always work.

Which is better for wall shelves: command hooks or strips?

Between Command hooks and ledges, we recommend ledges for hanging shelves. As we mentioned, Command Strips tend to hold up better on shelves, while hooks can make them uneven and wobbly.

You can also adjust the length and width of a command bar to perfectly fit your shelf, while you can’t change a hook.

Additionally, Command Strips also tend to hold more weight than hooks, so their design can make a big difference. Regardless, read your product’s instructions carefully before installing your shelving to avoid damage.

Do command strips stay on the wall?

Generally, command strips stay on the wall. However, over time, the adhesive on your strips will lose strength, so it’s likely that your shelf will start to come loose.

Additionally, wall texture can affect a command strip’s ability to stay on a surface. For example, if you have high gloss wall paint your strip may fall off if you put weight on it.

Additionally, if your wall is extremely rigid, a command hook may lose its grip and fall.

The key is to find a smooth, somewhat matte finish for your ledges and shelves.

Why aren’t my command strips staying on the wall?

One of the main reasons a command strip won’t stay on a wall is that it’s dirty. Typically, dust, dirt and debris on a wall will affect the adhesive on a Command product.

Many experts recommend cleaning your wall before applying a Command product as this will ensure a good grip. Use a Magic Eraser or a clean, damp cloth to do this.

When you’re done wiping the surface, make sure to let it dry. Command strips don’t like moisture, so putting them on a wet wall is a recipe for disaster.

What happens if a command strip gets wet?

If a command strip gets wet, expect it to fall off your wall. As previously mentioned, Command products do not respond well to moisture and can come loose if water is present.

According to the WaterProof tips, direct exposure to water will cause the adhesive to dissolve, which ultimately means your strip will peel off the wall.

This can be problematic for shelving, as the extra weight speeds up this fall process. So make sure the wall is clean, dry and smooth before installing your shelf.

Does moisture affect command strips?

In general, moisture is not good for adhesive products like Command Strips. If you live somewhere with more than 75-80% humidity, your strips probably won’t work.

Of course, the inside of your home won’t be as humid, but if you leave a window open or turn off the air conditioner, you might see your shelves fall off the wall.

However, if you have a dehumidifier in the room where your ledges and shelves are, there is less chance of moisture affecting them. Too much humidity isn’t good for the inside of a home, so a dehumidifying product can still help.

Can Command Strips dry out?

Yes, a command strip can dry out. Over time, the adhesive on your strip will degrade causing it to lose its tack entirely.

Again, this should not happen too quickly, as long as the indoor climate is not too dry. Like too much moisture, super dry, cool air can also affect a command strip, so using these strips isn’t always easier.

Is it better to hang a wall shelf with a nail?

For those debating the effectiveness of a Command product, using a nail is the sturdier option. Given that a nail will go in the wall, having your shelves sit on it is more predictable than using sticky tape.

As we mentioned earlier, command strips and hooks can be delicate whereas a nail can usually withstand weight and weather variations.

Additionally, many experts recommend using rivets for wall shelves as they provide a stable surface for screws or nails behind the wall.

Most wall shelves also include a set of recommended nails or screws so you know they can support the weight of the shelf regardless.

Should I use a screw to hang a wall shelf?

If you don’t mind a big hole in your wall, you can certainly use a screw to hang shelves. Unlike nails, screws need to create a much larger hole in the wall to attach properly, so they’re the best option for heavy objects.

However, unless you’re hanging something too big, using screws can be an unnecessary point of damage. Especially if you’re renting, drilling tons of screw holes can result in a hefty fine from your landlord, which is why command strips are so popular.

Are Command products worth it?

Overall, we would say that Command products are worth using. Generally, the strong adhesive on Command strips and hooks will hold wall shelves as long as you don’t exceed 15-16 pounds.

In addition, Command Strips will not damage your walls or paint. This can be perfect for renters and homeowners who don’t want to make a mess.

Additionally, Command-Strips should last a long time on your walls so you don’t have to worry about replacing them as often as other lower-quality adhesive products.

To wrap things up

Whether you need to hang ten shelves or one, knowing how to use a command bar/hook is important. According to our findings, command rails and hooks are suitable for light wall shelves.

In general, you can expect smaller Command glues to hold up to four pounds, while larger options promise up to 16. It is also important to ensure that the surface to which you are gluing a Command product is clean, dry and smooth.

Still, remember to follow the directions on your command strip or hook, and don’t be afraid to use a nail or screw for heavier, more valuable exhibits.

Made it to the end? Check out these helpful related home posts below!

Should You Insulate Indoor Shower Walls? [And how to do it]

Drywall screws visible through color – what to do?

Can you put nails in plaster walls? [And how to do it]

Wondering how to mount a bookshelf to the wall without screws? You are on the right page. Although we always recommend using fasteners such as screws, we will show you 4 other ways to mount your bookshelf to the wall.

Disclaimer: The information contained in this post is for informational purposes only and should not be construed as legal, financial or DIY advice. We strongly recommend consulting a professional before attempting any DIY work or repairs.

If you want to know how to mount a bookshelf to a wall without screws, there are several ways to do it. We looked at several techniques for mounting a bookshelf to a wall without screws and came up with the top three methods.

However, we should make it clear that we always recommend fixing heavy objects to the wall with a wall plug or screw.

How to attach a bookshelf to a wall without screws

Deciding to secure your bookcase or other heavy furniture can help keep you and your family safe. Children, pets, and earthquakes are just a few examples of how your bookshelf could potentially collapse.

Mounting a bookshelf to the wall can give you peace of mind and gives you one less thing to worry about in terms of security. Using screws to anchor furniture to the wall is an option; However, you can also use:

Heavy-Duty Glue Heavy-DutyTape Velcro Strips QDOS Safety Anti-Tip Kit

Whether you want to avoid screws to prevent adding extra holes to your wall or you want to make moving furniture easier, these solutions will help you.

Ways to mount a bookshelf to a wall without screws

Ensuring a heavy bookshelf is secure can give you more confidence in the safety of your home, especially if you have curious children or pets.

1. Heavy Duty Tape

Our Top Picks Black Gorilla Tape Check the latest price. If you click on this link we may earn a commission at no additional cost to you.

Using tape is an excellent option for anyone who wants to mount a bookshelf to a wall without screws. Many brands make heavy duty straps that do a fantastic job of anchoring heavy furniture like bookshelves.

When you are ready to move the bookshelf, you can easily detach it from furniture without leaving any traces. The strength of the band may not be sufficient to deal with climbing children or dogs bumping into it.

Although most straps cannot withstand heavier weights than screws, they can be a good option for stability. However, this method works best for lighter bookshelves.

Instructions:

Determine exactly where you want to place your bookshelf. It may be helpful to use a small pencil mark to guide you. Put a little isopropyl alcohol on a cloth and use it to remove oils and dust from the wall and bookshelf. Allow the surfaces to dry completely for about 10 minutes. Keep surfaces clean to ensure you get maximum adhesion. Press the tape firmly along the back of your bookshelf. Keep pressure on the band for about 20 seconds. It can also help to staple the tape to the shelf. Remove the protective strip on the back of the tape to reveal the sticky side. Be careful not to touch the sticky side to avoid getting any oils. Place your bookshelf along the wall where you have marked it with a pencil or plan to place it. Press the bookshelf against the wall with firm pressure for about 20 seconds. Test the strength by pressing gently but firmly against the side of the bookshelf. If the bookshelf moves, you may need to repeat the process with new tape.

The instructions above apply to most high performance tapes, although there are other variations where directions may vary slightly.

2. High Performance Adhesive

Our Top Picks Gorilla Clear Glue Check the latest price. If you click on this link we may earn a commission at no additional cost to you.

Heavy-duty glue is often a method homeowners use to secure various objects. In reputable shops such as B. Homedepot, you can easily find brands of glue that work well on multiple surfaces.

Urethane glue is the best choice for secure placement. When used properly, urethane adhesive is strong and should withstand some force.

The only downside to using glue is that some glue may stick to the furniture if you decide to move it. Meanwhile, if you bump into the bookshelf, it should be strong enough to prevent it from tipping over.

Instructions:

Choose the exact location where you want to place your bookshelf. Mark the wall with a light-colored pen to help you fix it. Use isopropyl alcohol on a cloth and rub the wall and bookshelf to clean their surfaces. Let it dry for about 10 minutes. Apply the urethane adhesive along the back of the bookcase where you will anchor it to the wall. Use your guide to firmly press your bookshelf into place. Apply pressure for about a minute to give the glue enough time to bond. Use masking tape to add pressure while the glue cures. Apply the tape to the wall, stick the bookshelf firmly to the wall and continue on the other side. Use at least four pieces of tape evenly spaced from top to bottom. You may need more tape strips for a larger bookshelf. Allow the glue to set for about 24 hours and then remove the tape.

3. Velcro strips

Our Top Pick 3M Dual Lock Reclosable Black Check Last Price If you click through this link we may earn a commission at no additional cost to you.

Some kits include furniture velcro strips, or you can use velcro strips from your local hardware store.

Velcro strips are a great no-screw option if you plan to rearrange furniture later. Unlike glue or tape, Velcro can be a bit easier to work with when moving furniture.

Instructions:

Use a pencil mark to mark where each shelf will line up on the wall. Thoroughly clean both the wall and the bookshelf with a cloth containing isopropyl alcohol. Add one side of velcro to the wall. Align them along the vertical edges of the bookshelf. Then add as many strips as needed where each shelf will be. Press each strip firmly. Repeat step three on the bookshelf, adding the other side of the Velcro in the same place. Place your bookshelf close to the wall to ensure all velcro is aligned. Allow the strips to fully attach for at least an hour. Slide the bookshelf against the wall and press where you placed the Velcro on each spot.

4. QDOS Security Anti-Tip Kit

The Qdos Safety Anti-Tip Kit is a patent-pending system for securing heavy furniture to prevent accidents or damage. It’s a relatively inexpensive kit to buy and claims to carry up to 200 pounds.

You can opt for a glue or screws included in the kit. If you choose to use the brackets, the hole is much smaller than a standard screw.

With the Qdos Security Anti-Tip Kit you can easily adjust the straps that anchor your furniture to the wall. Because of the easy adjustment, you can temporarily move your bookshelf to clean or grab items that fell behind.

This set is a great option for use in children’s rooms due to its durability and ease of use. When you’re ready to remove the kit to move furniture, you can easily do so. Refer to the included instructions to determine the best place to place the attachments for best results.

What to consider when attaching a bookshelf to the wall without screws

To further ensure the security of your home, there are a few things to keep in mind when mounting a bookshelf to the wall without screws:

Make sure you are happy with the location before anchoring your bookshelf.

If you have heavy carpeting, you can make the bookshelf more stable by pulling back the carpeting and nailing a wooden pad to the floor at the location of each foot.

A bookcase is more likely to wobble if it’s top-heavy. You can prevent this by placing most of the weight on the bottom shelves.

For best results, clean any surface you will be using to mount the bookshelf to the wall before doing so.

frequently asked Questions

Here are some of the most common questions about mounting a bookshelf to a wall without screws.

Do bookshelves need to be attached to the wall?

If you live in an earthquake-free area and don’t have children or pets, there’s no need to anchor your bookshelf or bookshelf to the wall. However, if a bookshelf falls over, it can cause harm to small children or pets.

Even without prying paws or hands, living in places with frequent earthquakes can pose a risk to you or others in your home. While unnecessary, there’s no harm in adding extra safeguards.

How do you prevent a bookshelf from falling over?

The best way to prevent a bookshelf from falling over is to attach it to the wall. There are several methods to anchor heavy furniture to the wall and keep it from tipping over, including glue, tape, Velcro, and various security kits.

Which glue is best for the wall?

Polyurethane or urethane adhesive is the best adhesive for a wall. One of the best things about polyurethane or urethane adhesive is that it sticks to multiple surfaces, whether porous or non-porous. This type of glue is waterproof and you can use it for both indoor and outdoor projects.

How do you level a bookshelf?

Use a spirit level to determine if your bookshelf is balanced. If not, make sure each side of the bookshelf supports roughly the same weight. Securing a bookshelf with glue, tape, or security kits can anchor it in place, keeping it balanced.

When should you anchor heavy furniture?

If you have children who climb furniture, own playful pets, or live in an earthquake-prone area, it’s important to secure heavy furniture as soon as possible. You may feel that anchoring heavy furniture like a bookshelf is unnecessary and can wait to be completed.

However, the sooner you attach a bookshelf to the wall, the sooner you can feel more protected. You never know when a disaster will strike, so it’s always better to take the necessary precautions.

Can you anchor a bookshelf to the wall without bolts?

When attaching a bookshelf to the wall with screws, a stud is an important part of the process. Screwing heavy furniture into drywall may not hold up as well, but it can destroy your wall in the process.

Luckily, you have the option of mounting a bookshelf to the wall without screws or rivets. We recommend using heavy-duty tape, heavy-duty glue, hook and loop straps, or a non-slip non-screw kit when anchoring a non-bolt bookshelf to the wall.

Why is my bookshelf leaning?

If your bookshelf is crooked, one leg may be too short. It may also be possible that your house has an uneven floor, which can be not only unsightly but also dangerous.

You can use leveling discs (you can find them at any hardware store) to level the bookshelf and keep it at an even height.

If you plan to mount your bookshelf to your wall, make sure you include the washers beforehand. The last thing you want to do is secure a bookshelf that faces the outside.

So how do you attach a bookshelf to a wall without screws?

There are many ways to mount a bookshelf to a wall without screws, but before you do all of that, make sure it’s necessary for your family’s safety. It’s also important to make sure you’re happy with the placement. You can use glue, tape, or velcro, or buy non-slip safety kits.

You May Also Like:

The typical cost of installing built-in bookshelves ranges from $1,270 to $4,100

Receive offers from up to 3 professionals! Enter a zip code below and get matched with top professionals in your area. find pros

If you love to read, you probably have a strong belief that you shouldn’t just keep 30 books. And with a built-in bookshelf, you can display them all while making the most of your wall space.

The cost of installing built-in bookshelves can range from $1,270 to $4,100. The final cost depends on their style, the type of material you choose, and whether you install them yourself or hire a professional.

“Whether you’re doing the installation of a DIY kit or renting a custom bookcase, focus on sturdiness,” says Andy Kilborn, member of the Angi Expert Review Board and owner of Andy’s Handyman. “The weight that the shelves will hold needs to be well secured.”

Related Article Organize Your Bookshelf With These 7 Simple Tips Play around with bookcase organization to find the ending to your fairy tale

How much does it cost to install built-in bookshelves per unit?

When installing bookcases, you must first decide whether you want a custom work or a prefabricated unit.

Photo: Sveta / Adobe Stock

Prefab bookshelves

Prefabricated built-in bookcase units can be purchased at your local hardware store and prices typically start at $150 per linear foot. If you want to reduce some expenses, buying ready-made shelves can be a good option. And you don’t have to do the installation yourself – you can hire a local carpenter or handyman in your area to ensure the installation is done correctly.

Custom bookshelves

If you prefer custom built-in shelves, you will have to pay more. Bookshelves built specifically for your space can cost anywhere from $150 to $1,200 per linear foot. Floor-to-ceiling bookshelves typically cost $5,000 to $14,000 total.

How much do built-in bookshelves cost by type?

When choosing a built-in bookcase, there are different types of materials to choose from, which affect the cost and appearance.

MDF bookshelves

Medium-density fiberboard, or MDF, is made from layers of pressed and dried wood fibers, giving it a smooth surface. They’re also sturdy, which means they can easily carry your entire Harry Potter collection.

If you’re on a budget or want to add your own personal touch by painting the shelf, MDF is a great option. But if you are considering applying a varnish, the fiberboard will absorb the stain, making it difficult to achieve the desired effect. The average cost of an MDF bookcase is $40 to $150 per linear foot, not including installation.

Hardwood plywood bookcases

Plywood is another budget-friendly option, made up of different layers of wood fibers pressed together. Plywood might not be as visually appealing as a walnut or pine shelf, but a coat of varnish will liven it up – you can also paint it to match your room decor! The average cost of a plywood bookshelf is comparable to MDF shelving and ranges from $40 to $150 per linear foot.

Metal and wood bookshelves

The combination of metal frame and wooden shelves creates a beautiful yet functional aesthetic. If you’re looking for something more modern, a metal and wood built-in bookcase ranges from $450 to $1,000 per linear foot.

Wooden bookshelves

Wooden bookshelves add a natural touch to any room. Each species of wood has its own unique coloring, pattern and texture that add depth. Choose from a range of hardwood options including birch, cherry, maple, oak, pine or walnut. The average cost of a custom solid wood bookcase ranges from $150 to $400 per linear foot.

The cost breakdown of built-in bookshelves

From materials to installation, this is what a built-in bookcase can cost.

materials

Prefab bookshelves typically start at $150 per linear foot, while custom bookshelves can range from $150 to $1,200 per linear foot or more, depending on design and materials.

installation costs

Hiring a carpenter can range from $30 to $130 an hour. The amount of time it takes to build and install a bookshelf depends on the design, features, size, and materials. When calculating the costs, allow for an installation time of five to 20 hours. The typical cost for a professional to install a custom built-in bookcase ranges from $1,250 to $4,100.

How much does it cost to install built-in bookshelves yourself?

You can install a built-in bookshelf over a weekend, and it can save you a pretty penny in installation costs. But it might not be as easy as you think — in addition to shelving, you have to factor in the cost of tools and hardware, which can add up quickly. And without the right materials, cutting it square and clean (without unsightly chips or slipping) will be difficult and won’t keep your bookshelf looking its best.

It can be worth hiring a carpenter or handyman to ensure your bookshelves are placed correctly on the wall and are 100 percent secure. Trust us, you don’t want them to tip over.

frequently asked Questions

Should I install built-in bookshelves?

Walls are often thought of as dead space, but built-in bookshelves can be an opportunity to turn them into something useful. Plus, they can even add value to your home!

What should you consider when deciding on a built-in bookcase?

It is important to have a clear idea of ​​how you will fill your built-in bookshelf, e.g. B. whether you will be using it to display books, board games, decorative items, or all three. Having a clear idea of ​​how it will be used is helpful in determining the desired size and overall function of the shelves.

What projects should I be doing at the same time?

While imagining your new space, don’t forget a cozy reading nook. Now is the perfect time to set up a window seat to curl up in. The cost of installing a window seat averages about $2,500.

When it comes to home projects, we can certainly appreciate budgets—and a garage organization project is no different. How do you plan such a project and how much does a typical garage shelving system cost?

After visiting your local hardware store/ hardware store, or searching online for workshop organization products, you will no doubt find that there are a variety of options available from a range of vendors that accomplish different tasks. From closets to slatwall to overhead and garage shelving, Delaware Valley residents have numerous options, however, pricing can be difficult to determine due to the nature of the materials and accessories included in these systems.

At Garage Sense, we find that many homeowners benefit from a combination of solutions, but it all starts with shelving. Most two car garage installations that we complete include between 12ft and 24ft of shelving.

Determining your cost requires a quick visit from the Garage Sense team to develop a design and estimate that works for you. However, the basic rule of thumb for garage shelving is $60 per linear foot. There would be additional cost for hooks and accessories. So a 12 foot system (shelves only, installed) would cost around $720. Additional shelves, cabinets and accessories can be included in the plan, which will be reflected in a higher price.

Contact Garage Sense to arrange your free estimate today.

610.996.3365

[email protected]