Are you looking for an answer to the topic “hard side duck boat blind“? We answer all your questions at the website Chewathai27.com/ppa in category: Top 867 tips update new. You will find the answer right below.
Table of Contents
How much does it cost to build a duck blind?
Don’t let your financial woes stand in the way of your slaying ducks. With a little work, you can build a roomy, three-man duck blind for as little as $50.
How tall should a duck blind be?
The front wall of the blind slopes inward 12 inches toward the roof line and is 56 inches high from its top edge to the floor. The blind features six shooting holes, separated by dividers running from the top of the wall to the front of the roof. Each divider is constructed of two sections of 2 x 4s.
What makes a good duck blind?
Bright colors will attract the birds’ attention and blow your cover. Camouflage the outside well. Take the time to do it right and use natural cover from the surrounding area. Using grass when there’s no grass around won’t work.
Hard sided blind on jon boat
A good blind is a home, a memory factory and a place where we can share our hunting heritage with the next generation.
Blinds can be anything from a permanent concrete structure with all the comforts of home to a bunch of cattails or marsh grasses. Layout blinds have replaced digging a pit in many cases, and even these require maintenance during the off-season and preparation for opening day. Improve your blind and you can increase your success.
Here are some ways to make your blinds, whether permanent or temporary, better suited for the season ahead.
Temporary blind tips
Don’t destroy the landscape. Avoid chopping down entire trees and shrubs and uprooting large patches of grass just to make a small blind.
Use natural materials to create a worn, years-old look rather than something that stands out as new construction.
Get a different perspective. Walk 300 meters and look at your blinds from a new angle – does anything stand out as unnatural?
Thoroughly soil layout blinds. An out-of-the-box layout will stand out in many cases. Smear dirt and mud all over the top and sides to give it an earthy look.
Always keep a handsaw or hatchet nearby. Packing these tools will allow you to clear the firing lanes when building a temporary screen along a river bank or tree line.
Enter materials. Bring camouflage sacking or other artificial blinding material to throw over a few logs to create a roof for optimal concealment. See Steps to Build a Simple, Temporary Duckway Shade for more information.
. Make space. Temporary blinds can be anything you want, so don’t conform. Make your blind large enough for the entire hunting party, including dogs.
Use tent poles. Packing in a few tent poles will help create a base for an extensive temporary shade when mixed with natural materials.
The Bucket Theory. If you routinely build temporary blinds, carry a 5-gallon bucket of materials. Once the blind is set up, use the bucket as a seat.
Remember it’s temporary. If you’ve built a temporary shade and birds still seem to see you, don’t be afraid to start over. Demolish it and make upgrades for Phase II.
Permanent blind tips
How far apart should duck blinds be?
Dunn says that a good rule of thumb is to set the decoys about six feet apart. Large spreads are placed in large areas; smaller, tighter spots require fewer decoys. “And on calm days, it’s almost impossible to finish ducks without decoy movement,” he says.
Hard sided blind on jon boat
My personal distrust meter went off almost immediately after my boss called me into his office to discuss a story idea. “Error,” he said. “I want this feature to focus on the most common mistakes duck and goose hunters make.” It was like he’d been sitting in the blind with me, taking notes, for the last 40 years.
Could he possibly have the evidence on film? How else could he have known I was the resident expert? Yes, I’ve made all the mistakes, from A to Z. Take the time-tested “One More Swing” strategy, for example. As in: “Leave her a little lower, one more swing, then we’ll take her.” When this happens, you can count on the circling ducks to magically disappear and never be seen again.
While I managed to make plenty of mistakes on my own, too many of those mistakes happened in the presence of witnesses. My former Illinois River Valley cohorts would probably vote to do this book-length piece, a confession of sorts. The truth hurts. Not to mention the recurring nightmares.
Rather than provide incriminating personal evidence of my own waterfowl hunting shortcomings, however, I have chosen to enlist the help of experts, from people who have been there, seen this and are quick to discover the little things that go on the Territory can make a big difference. Rick Dunn, a former world champion duck caller, makes echo calls and regularly grazes flooded lumber in Arkansas.
Dave Smith creates incredibly realistic lures from his home in the Pacific Northwest. Sean Mann, call maker and World Goose Call Champion, hunts the Canadian Plains and Atlantic Flyway each season. And then there’s South Dakota’s Tyson Keller, who has built an impressive rep chasing snow geese down the Central Flyway. Below is a list of the most common waterfowl foul ups.
1. Insufficient Concealment
We’ve all heard it before, but being well hidden remains one of the waterfowl hunter’s most important considerations. Birds are quick to sense movement on the ground. Not being careful is mistake numero uno. Be still, don’t gape and cover up.
“Hidden properly is tremendous,” says Smith. “The main thing is that you have to do something so that the birds focus on the bait and not on your blinds. Most people don’t realize that even a well camouflaged layout blind is easily seen from the air – they aren’t invisible. Instead, place the blinds well outside of the decoy spread. If there are contours or breaks in the landscape to help the blinds blend in, take advantage of them, even if you’re in the middle of a huge field.”
Keller, who has successfully lured huge flocks of snow geese onto his bait spread – rarely an easy task – believes gunners reduce their chances of success by being careless when hiding.
“Whether it’s plant blinds, pit blinds or festival blinds, you have to blend in with the environment,” says Keller. “Not being hidden can ruin a great hunt. Any objects that are out of place in the field will be spotted by birds.”
Keller also suggests literally seeking an advantage. “If you can hide behind a ledge or a small depression in the field, you can minimize your shadow or be in the shadows. Shadows are easy to spot from the air. If you can eliminate your shadow, you’ll be better able to hide.”
Mann considers proper hiding to be part of his spying program. When looking for places to hunt, he pays attention to the terrain and accompanying vegetation.
“Hunters should ask themselves how to hide when spotting birds,” says Mann. “Your goal is to become part of what is already there. If you hunt with ground blinds, how do you become part of the ground? Don’t become a ‘beaver hut’ in the middle of the field, become the ground with no more or less foliage than the surrounding area.”
2. Inadequate scouting
Another common mistake made by waterfowl hunters is failing to look around before hunting. Finding a place to hunt often requires considerable homework and travel. You want to be in an area that the birds use. Mann says hunters should pinpoint where waterfowl are feeding.
“The number one scouting mistake is chasing the ‘X’,” he says. “This is what happens when you don’t put the birds to bed. Too many people stop exploring when they see birds in a field. They say, ‘There they are; we will hunt this field tomorrow.’ Instead, stay and watch the birds take off, then find the exact spot where they last fed. Lock position on a handheld GPS and hunt on the X. You won’t be running around in the dark looking for the right place and your hunt will turn out much better.”
Dunn says his occupations in the flooded woods and elsewhere have taught him it pays to watch the ducks. “Hunters need to remember that hunters usually give themselves away in two ways: beaming and moving. If you’re not hidden well enough, the ducks will tell you; all you have to do is watch them,” says Dunn.
On their hunt for the suspicious snow goose, Keller and his crew have been known to spend hours driving through the countryside in search of birds. But as gas prices have gone through the roof, that approach has changed.
“To make the best use of scouting time and minimize costs, it’s often effective to find high ground in an area that the birds are using,” says Keller. “With binoculars or a spotting scope, you can observe flight patterns and areas where the birds are several kilometers away. If you can pinpoint the high-traffic areas, as well as the fields or watering holes of your choice, you’re much better off.
“Another effective strategy is scouting while hunting. If you bring binoculars, you can pinpoint the areas that the birds are targeting while you’re in the field,” says Keller. “Keeping an eye on the birds while hunting can significantly reduce the amount of driving and exploring later in the day.”
Dun agrees. “We have found that the best time to look for ducks is when the hunt is good. So if you finish hunting early one day, take that extra time to look for more jobs,” he says. “If you use your time wisely, you can find great new places to hunt.
“Keeping a log also helps us record useful information about these potential hunting grounds, such as the date, water depth, available food sources, and the best wind direction for hunting at that particular location,” adds Dunn.
3. Improper bait placement
Once you’ve found a field or wetland used by birds and obtained permission to hunt the terrain, how you use your lures can have a huge impact on your success. Bad decisions cost you birds.
“Common mistakes are placing baits in a certain pattern, putting them all downwind, and setting them the same distance apart,” says Smith. “It’s all old-school goose hunting, and times have changed. Geese have long understood as our fathers did. It’s time to go natural and random in most areas of the country.”
man agrees. And he’s adamant about a critical component. “In my experience, the number one baiting mistake of all time is not spacing the baits far enough apart,” says Mann. “Why do you think they call it a spread? Make sure you have enough parking spaces!
Related: 10 Surefire Decoy Strategies
“If birds come to your lures and they’re hovering and dancing or circling and circling in the air, you haven’t provided adequate parking,” he adds. “If your spread is right, birds don’t circle as much and they don’t look for a place to put their feet. They come right in and land. When in doubt, spread them out.”
Dunn says a good rule of thumb is to space the baits about six feet apart. Large spreads are placed in large areas; smaller, tighter spots require less bait. “And on calm days, it’s almost impossible to take down ducks without baiting,” he says. “That’s when a jerk string comes in handy, and sometimes multiple jerk strings are needed.”
Keller and his accomplices have been known to set up to 1,500 full-body baits for snow and blues. This isn’t feasible for everyone, however, and while goose hunters often prefer large numbers, the overall look can be just as important as the amount of bait.
“My advice is to be natural and creative,” says Keller. “Set your spread as if you were seeing birds in the field. I don’t usually have a set lure pattern in mind when hunting. Birds capture areas where baits are grouped and adjacent holes are nearby. I often place several densely packed groups of decoys throughout the spread to simulate heavy feeding and aggressive behavior.”
4. Unnatural calling
Depend on your decoys to get the job done, but most of the time you’ll need to call out your duck or goose call at certain times to get the birds’ attention. Learning to call takes practice. There is also a learning curve in which calls to use and when to call in certain situations. So, what are the most common call mistakes waterfowl make?
“I’ve always said the biggest mistake is not calling at all,” says Mann. “Today I would say that calling without a clue is the number one mistake. What I mean is that so many people today use calls with no idea how they fit into the hunting scenario. They just try to call ‘like the guy on the CD’ or try to give each bird a calling contest routine. If calls are overused they become ineffective.
See Also: 7 Deadly Duck Calling Mistakes
“Hunters should try to learn their ‘chops’ call from the birds themselves, not from other callers,” he continues. “Other callers can teach you how to make the call, but they can’t give you the cause-and-effect knowledge that top callers need. This can only be learned through constant bird watching. Pay close attention to what happens when you hear the birds make certain sounds. Then you have a clue and can be more effective in the field.
Smith, who also often hunts in high-pressure areas, pays close attention to what other hunters are doing around him. And he’s noticed a pattern of call errors that birds often flare up rather than entice them to.
“In our area, the geese have become extremely call-shy, but few of the hunters,” says Smith. “My success comes from calling very, very sparingly and at exactly the right time when the birds are ready and willing to listen. Often this opportunity comes after the flock has checked the entire spread and the birds need a little lure to persuade them to land. If they can get all the way in without any call whatsoever, all the better.”
Keller also listens closely to his competitors in the field and has learned which techniques work and which don’t. “Unnatural cadence is the most common mistake I see in callers,” says Keller. “It seems that sometimes they try to do more than they can. The point is that hunters should stick to the basics, which sound real and natural.”
The call volume also makes a difference. “The most common mistake duck hunters make when calling ducks is calling too loudly when the ducks are around,” says Dunn. “If you’re trying to get the attention of ducks at a distance, you need to shout loudly. You can also call new ducks loudly at the beginning of the season and get excellent results. But if you want to call ducks consistently throughout the season, you must learn to read ducks and call them at a volume that doesn’t startle them. Watch the ducks closely and they will tell you if you have called too loudly.”
5. Wrong setting of the shot
Which brings us back to the “one more punch” dilemma that has plagued waterfowl hunters for years. When do you set the tone?
“I typically use the first or second flocks of the day to set the pace for the rest of the hunt,” says Keller. “If the first birds jump in without hesitation, it will be very easy to fire. When the birds are cautious or it’s late in the season it can be more difficult to get the shot.
“When hunting educated birds, try to pay close attention to the leader birds in the flock,” he continues. “Usually the leading birds are the loudest and also give you a pretty good indication of how they’re going to end up just by watching them.”
Mann considers others in his hunting party before making a decision on when to fire. “The most difficult part of waterfowl hunting is getting the shot right. You must give the shot for maximum effectiveness. Too many people wait for the shot to be good for themselves when it could diminish your success as a group,” says Mann. “Set the tone so everyone in your group has a chance to contribute to your success.”
I have it.
How wide should a duck blind be?
Your hunting party will dictate the size of the blind. Six feet wide and 16 feet long will house four people comfortably with room to spare for one or two more.
Hard sided blind on jon boat
The decision to build a duck visor came after one of those cold hunts in late January a few years ago. Frozen, wet from a leaking boot, hungry and tired, I told myself I was fed up with the ducks as I hobbled ashore. Nothing a warm house and steaming coffee can’t cure. After coming to my senses, my friends and I drew up the plans that would eventually become the blind we hunt today.
Our plywood box may not be anything special, but it’s better to spend half the day trembling. Instead of sitting out in the cold, a portable heater now keeps me warm while I lounge on a padded bench. I often indulge in bacon and eggs cooked on a Coleman stove, accompanied of course with fresh coffee. When the mallards are down in flocks, our duck hole becomes my second home.
When the weather warms up and the water level starts to drop, it’s time to build your own blind. With the help of a few handy friends, the project shouldn’t take more than a weekend. Then, when duck season comes, you’ll have a hard time leaving the wood.
Choose a prime location
No matter what type of terrain you’re hunting, look for food like duck potatoes, moor grass, or acorns. Plenty of food attracts waterfowl throughout the winter. Easy access to cover and wetlands, and low hunting pressure keep them lingering.
Look for food sources before choosing a hunting spot. An ample supply of food, such as acorns in the wood, will attract and keep ducks throughout the winter.
Consider the prevailing wind and position of the sun when deciding where to build, and keep both in mind. Waterfowl almost always land into the wind and you certainly don’t want a glare to interfere with shot accuracy. Also, light shining into your blinds will scare away any bird within range.
If your honey hole has held ducks before, it probably will next year. However, if you’ve seen less bird activity, don’t be afraid to venture elsewhere. Habitat often varies, and ducks will always go where the easiest access to food and cover is.
Consider the vegetation surrounding your suspected location. While a blind can be well hidden in the spring and summer, one might bare it when the leaves are dying. Too much nearby cover can affect your vision. Make sure you have a clear view of the water and sky.
materials and design
Your hunting party determines the size of the blind. Six feet wide and 16 feet long sleeps four comfortably with room for one or two more. Get creative. Make your project as big or small as you like. In any case, remember to use pressure-treated plywood and lumber, even indoors, which should resist rot for many years.
When building a duck blind, make sure all of the wood is pressure treated, which is coated with chemicals to prevent the wood from rotting.
Typically, using four 4×4 inch uprights braced with 2×8 cross members provides a solid foundation. Keep the blinds up so you don’t get swamped when the water rises in winter. Fasten the foundation posts into the ground and pour concrete when the area is free of water for added stability. Frame with 2x4s surrounded by half inch plywood walls, floor and roof. The addition of overhead partitions running from the roof to the front wall increases structural integrity and provides room to attach vegetation while brushing. If you leave a crack in the bottom, the water can drain. Cover the inside and outside with olive green or brown spray paint.
The back wall should be higher than the front wall with enough headroom to sit without crouching. Tilt the roof down from front to back. Extend it three quarters of the way down the aperture and stop two feet short of the front wall, which should be shorter than the back wall to allow plenty of room to shoot. Use the same plywood as the walls for a hinged door at the back. In addition to the stairs for you, if you have a retriever, consider building a smaller ramp on the side with a separate platform.
concealment
Ideally, you’ll have plenty of cover to build your shade around, such as B. willow trees or cattail tufts. This will help the set blend in with the environment and make brushing easier as you simply need to collect green vegetation to fill in the gaps. Attach woven metal wire covering the outside to secure seedlings and blades of grass with zip ties. Wait a week before opening to prune any green plants to keep them fresh for as long as possible. Also, covering the outside with olive or tan mesh will help break it up further.
Having lush vegetation near your blinds will help break up their boxy appearance and make them look more natural.
When the blind is alone and there is little surrounding coverage, effective brushing is paramount. To further break up the boxy appearance, drive posts into the ground near the blind and attach small oak or willow trees to them. Dot them at different heights and spacing to mimic a thicket and add a natural look to your project.
final touch
I’ve seen blinds with TVs, kitchens, boat slips, and fancy furniture. The only thing missing was a bedroom. This way you never have to go home. Padded seats and space for a heater are enough for most people. Shelves on the front wall will come in handy for storing extra boxes of shells, as well as a cup of coffee. Don’t forget a place to stash your shotguns, where they’ll be safely out of the way when not in use but readily available. Placing traction tape in strips on the floor can prevent slipping.
The best thing about the project is the fulfillment you will get after the first hunt in your new blind. For me, every opening day, every year, brings the same result. All the hard work I’ve put into building and maintaining my home over the years manifests itself when the first group of ducks race through the wood. For so many reasons I can’t help but smile.
Is a duck blind necessary?
Budget Blinds
But these features certainly weren’t necessary for hunting success. Many of my best hunts have come as I’ve huddled in brush, leaned against trees, or sprawled in muddy fields or on sandbars. In other words, a fancy blind or pit is a wonderful amenity but not a requirement for duck hunting success.
Hard sided blind on jon boat
Lot of money! No, not the kind that raise antlers, but what many duck hunters spend to fund their sport: private clubs, fancy blinds, expensive shotguns, oversized bait spreads, and more. This is an endeavor that can soak up money like a bowling ball in quicksand.
But it doesn’t have to be that way. Hunters can experience a quality duck hunt while staying on a budget. Thrifty hunters may need to hunt a little harder and smarter, but they can still find quality waterfowl.
So if the recession has left a lasting impression, your credit card’s maxed out, your child’s college tuition has skyrocketed and you can’t afford a 24-karat duck hunt, don’t despair. The quality of a hunt is not always in proportion to its cost. Here’s how you can cut corners to keep duck hunting costs down while still enjoying great shooting.
Hunting grounds for price-conscious hunters
For starters, forget about private clubs and leaseholds. Owning or leasing a prime duck place may cost a prince’s ransom. However, there are many options for budget hunters. All you have to do is find them.
First up are public lands: wildlife management areas, sanctuaries, public reservoirs and natural lakes, free-flowing rivers and streams, military reserves, state and national forests, BLM land, utility land, and Ducks Unlimited projects.
Public spaces? Aren’t they always crowded and hyper-armed? Some are, some are not. The most well-known areas with the most ducks can be mob scenes. However, other areas that don’t attract as many birds may still offer good shooting opportunities. That’s where the “hunt a little harder” part comes in. Finding such spots requires some legwork, but they exist and can be uncovered and enjoyed at little or no cost.
Another option is to figure out how to outperform the competition in high-pressure areas. This may mean going in earlier, going in deeper, or staying out longer. For example, when I was in my late teens and early 20s, a friend and I went to a public wading area in western Tennessee where first-come, first-served seats were available. A hole in this flooded ground attracted ducks like a magnet. To claim it, my buddy and I would wade in two hours before filming time. We’ve had some long, cold waits until sunrise, but we’ve also taken a lot of limits from greenheads there. Other hunters weren’t willing to get off that early, so we routinely charged that price.
Budget-conscious hunters should not rule out hunting on private property. Those who find landowners willing to issue hunting permits can have good hunting opportunities. This is especially true after heavy rains have pushed backwater into farmland or pastures that do not normally flood. Ducks flock to such “new waters” and some landowners give permission to hunt. You’ll never know until you ask.
Also, don’t overlook private ponds and watersheds. Small bodies of water can attract a surprising number of ducks. Glazing public roads is the best way to find these places. True, some landowners will refuse you, but others might give you permission to hunt.
Rafting is almost a lost art, but sometimes small rivers and streams can hold large numbers of ducks. This is especially true during a frost when shallow wetlands are closed and the birds move to running water.
Another point: you don’t have to be in the heart of the Zugstrasse to experience a good duck hunt. In outlying areas, duck numbers may be lower, but hunting pressure is also reduced. As a result, a hunter who finds a few ducks outside of a popular flight path could have them all for himself.
budget blinds
I’ve been looking for duck blinds whose owners had invested a small fortune in electricity, plumbing, full kitchens and even lounge areas. But these qualities were certainly not necessary for hunting success. Many of my best hunts have been made crouching in the undergrowth, leaning against trees, or stretching out in muddy fields or on sandbars. In other words, a fancy hideout or pit is a wonderful amenity, but not a requirement for duck hunting success.
On the contrary, hunters can escape the prying eyes of the birds with only a minimal payout of dollars. Highly effective blinds can be built with a few poles (cut your own), some camouflage netting, plastic zip ties, and natural vegetation.
Natural vegetation can provide the best camouflage when it comes to avoiding being spotted by circling ducks.
In fact, one of the best blinds I’ve ever had was one I built with a partner in knee-deep water in a flooded soybean field. We drove four corner poles, attached shooting rails front and back, and then stacked long, bushy oak branches against the rails teepee style. Circling ducks never saw us as we crouched under the brush.
A layout blind is another excellent option for budget hunters. Some initial investment is required, but the dual benefits of a layout curtain, portability and full, rapid concealment, more than justify its cost. Layout visors can be used in open fields, tidal flats, sandbars and other places where ducks like to work and hunters without layout visors have trouble hiding.
Then there’s the no-blind (and free) option: hide in natural cover. Cattails, sawgrass, willows, logs, and other natural on-site vegetation can provide the best of all concealments when it comes to avoiding detection by circling ducks. Remember that you will need cover both overhead and in front and behind. Also, a swamp seat or shooting stool is handy for lowering your profile and sparing your back while crouching for natural cover.
Low cost decoy spreads
Bait dispersal is another area where hunters can reduce their costs. There’s no question that hunting a large number of realistic baits is effective, but just a few good baits in the right spot can also attract ducks. In my opinion, being on the X is more important than spreading a four star. In many cases, a few dozen baits will suffice.
In situations where ducks work closely together or there is no competition, standard sized (less expensive) decoys will fill the bill. When buying lures, savvy hunters can save big bucks by searching for catalog or website “hot buys”, online postings, and even discount sales. You can buy used baits and touch them up, and you can also save a few bucks on rigging costs by buying heavy nylon line (brown or black) and making homemade anchors (pouring small paper cups with concrete or molding weights out of melted scrap lead). ).
And then there are black plastic bottles. Years ago, my hunting partners and I collected several dozen 1-gallon milk cans, dunked them in cold roofing pitch diluted with gasoline, and let them dry. We then rigged these jugs up with line and anchors and scattered them among the regular baits in our large open water area. In this way we have significantly increased the size and visibility of our setup for a very small cost. The ducks loved this spread. They would land right next to the jugs without any suspicion.
Equipment savings
In addition to blinds and decoys, duck hunters use a wide range of other equipment, and there is an opportunity to save on costs with almost every purchase. For example, hundred dollar acrylic or wooden calls are nice to own, but many companies make $25 plastic calls that play beautiful duck music.
Shooting a nice over-and-under or a high-priced autoloader may carry some prestige, but field-quality pump-action shotguns have probably killed more ducks than any other type. Pump shotguns like the Remington Model 870 have been favorites of duck hunting guides for decades.
Since lead shot was banned for waterfowl hunting, ammunition manufacturers have introduced a range of non-toxic shot alternatives, including modern alloys that are denser and more effective than lead. However, these bowls are expensive, costing $2 to $3 each. In my experience, cheaper steel shot loads are capable of taking down ducks cleanly at reasonable ranges. At the ranges where most decoy ducks are caught, steel shot loads will perform almost as well as their more exotic counterparts at a fraction of the cost.
Waders are one area where duck hunters should not skimp on quality. Sturdy waders with good foot insulation and features such as pockets, shell loops and D-rings are recommended. Most hunters prefer neoprene waders for their flexibility and warmth, but nylon waders cost less while still providing great service.
Hunters often need a boat to hunt waterfowl, but new stealth boats and outboards can definitely be budget breakers. Instead, consider buying a used rig and camouflaging it yourself. Just be sure to buy enough boat to safely hunt in the waters you will be hunting. Also, for two-man hunts on smaller, calmer waters, a canoe or johnboat and paddle are a cost-effective alternative to a larger boat and motor. Both canoes and small johnboats can be transported on cars or in pickup beds, saving the expense and maintenance of a trailer.
Duck hunters commonly use camouflage clothing, a blind pouch, binoculars, a thermos, flashlights, decoy gloves, mechanical decoys, and other accessories. But none of these elements is an absolute necessity. Think about what you want and what you can afford, then build your gear accordingly.
Save money; Hire a guide
For some hunters, saving may actually mean hiring a guide for a few hunts per season instead of hunting themselves. That may sound inappropriate at first – spending money to save money – but it’s actually not. Comparing the cost of a guide versus buying equipment and all the other costs associated with hunting on your own, the first option can be positive. If you are hunting with a guide, chances are you are hunting in a good location, quality hide and over a hunt proven decoy spread. So if you can only hunt a few days per season, a guide might be the best value for your limited hunting dollars.
Duck hunting strategies on a budget
Finding hunting spots and having the essentials is important, but it all comes down to what you do with what you have. Budget-conscious hunters should look for a niche—a place, strategy, or time that other hunters don’t know about or want to get involved in. Waterfowl on a budget need to make up for what they lack in money with knowledge and skill, and there are several good ways to do this. One obvious way is to find a hunting spot that won’t be overrun by competing hunters. Spots like that are out there, but again, it takes some legwork to find them.
Try to find ducks that don’t pressure other hunters, then figure out how to hunt them down.
For example, I know a group of young Tennesseans who travel to Arkansas several times a season to hunt in a small, low-pressure state wildlife refuge. A few years ago they found a place where some ducks were working and since then they’ve gotten a lot of good shots there.
Another reliable strategy is to learn where ducks move under different weather and water conditions and move with them. After a heavy rain, fresh flood water rising into fields or forests in the Auland can attract large numbers of ducks. During a hard freeze, ducks can move to rivers and lakes where the water is still open. On a large lake, try to position yourself at a point upwind at the mouth of a feeder creek where merchant ducks can see your bait. At rivers, just walk until you flush ducks (usually in a pocket or whirlpool next to the bank), then line up where they’ve been resting.
By learning where and when to hunt, waterfowl can stay in the action. This may require you to wade far back into dense cover in a public area where ducks have been driven away by hunting pressure. It may mean that the hunt is timed to coincide with changes in the weather. It can mean being persistently on the lookout for secluded beaver ponds and swamps where birds like to hang out.
When it comes to hunting strategies, cost-conscious hunters should remember two Cs: complacency and creativity. You need to replace the first with the second. Don’t do what everyone else is doing and get comfortable with leftovers. Instead, try to find ducks that don’t pressure other hunters, and then figure out how to hunt them down.
Do you have the right attitude?
Duck hunting on a budget requires thrift rather than recklessness. It means spending on essentials but no gimmicks. It takes effort, which saves you money. Overall, duck hunting on a budget involves a mindset of frugality but no acceptance of mediocre shooting. There was nothing second rate about the hunts my partner and I enjoyed in this Tennessee fording area so many years ago, or on dozens of similar hunts since. More dollars doesn’t necessarily mean more ducks. Waterfowl hunting with minimal fuss can still fill their duck strings, and the gratification of that keeps them laughing all the way to shore.
How wide should a duck blind be?
Your hunting party will dictate the size of the blind. Six feet wide and 16 feet long will house four people comfortably with room to spare for one or two more.
Hard sided blind on jon boat
The decision to build a duck visor came after one of those cold hunts in late January a few years ago. Frozen, wet from a leaking boot, hungry and tired, I told myself I was fed up with the ducks as I hobbled ashore. Nothing a warm house and steaming coffee can’t cure. After coming to my senses, my friends and I drew up the plans that would eventually become the blind we hunt today.
Our plywood box may not be anything special, but it’s better to spend half the day trembling. Instead of sitting out in the cold, a portable heater now keeps me warm while I lounge on a padded bench. I often indulge in bacon and eggs cooked on a Coleman stove, accompanied of course with fresh coffee. When the mallards are down in flocks, our duck hole becomes my second home.
When the weather warms up and the water level starts to drop, it’s time to build your own blind. With the help of a few handy friends, the project shouldn’t take more than a weekend. Then, when duck season comes, you’ll have a hard time leaving the wood.
Choose a prime location
No matter what type of terrain you’re hunting, look for food like duck potatoes, moor grass, or acorns. Plenty of food attracts waterfowl throughout the winter. Easy access to cover and wetlands, and low hunting pressure keep them lingering.
Look for food sources before choosing a hunting spot. An ample supply of food, such as acorns in the wood, will attract and keep ducks throughout the winter.
Consider the prevailing wind and position of the sun when deciding where to build, and keep both in mind. Waterfowl almost always land into the wind and you certainly don’t want a glare to interfere with shot accuracy. Also, light shining into your blinds will scare away any bird within range.
If your honey hole has held ducks before, it probably will next year. However, if you’ve seen less bird activity, don’t be afraid to venture elsewhere. Habitat often varies, and ducks will always go where the easiest access to food and cover is.
Consider the vegetation surrounding your suspected location. While a blind can be well hidden in the spring and summer, one might bare it when the leaves are dying. Too much nearby cover can affect your vision. Make sure you have a clear view of the water and sky.
materials and design
Your hunting party determines the size of the blind. Six feet wide and 16 feet long sleeps four comfortably with room for one or two more. Get creative. Make your project as big or small as you like. In any case, remember to use pressure-treated plywood and lumber, even indoors, which should resist rot for many years.
When building a duck blind, make sure all of the wood is pressure treated, which is coated with chemicals to prevent the wood from rotting.
Typically, using four 4×4 inch uprights braced with 2×8 cross members provides a solid foundation. Keep the blinds up so you don’t get swamped when the water rises in winter. Fasten the foundation posts into the ground and pour concrete when the area is free of water for added stability. Frame with 2x4s surrounded by half inch plywood walls, floor and roof. The addition of overhead partitions running from the roof to the front wall increases structural integrity and provides room to attach vegetation while brushing. If you leave a crack in the bottom, the water can drain. Cover the inside and outside with olive green or brown spray paint.
The back wall should be higher than the front wall with enough headroom to sit without crouching. Tilt the roof down from front to back. Extend it three quarters of the way down the aperture and stop two feet short of the front wall, which should be shorter than the back wall to allow plenty of room to shoot. Use the same plywood as the walls for a hinged door at the back. In addition to the stairs for you, if you have a retriever, consider building a smaller ramp on the side with a separate platform.
concealment
Ideally, you’ll have plenty of cover to build your shade around, such as B. willow trees or cattail tufts. This will help the set blend in with the environment and make brushing easier as you simply need to collect green vegetation to fill in the gaps. Attach woven metal wire covering the outside to secure seedlings and blades of grass with zip ties. Wait a week before opening to prune any green plants to keep them fresh for as long as possible. Also, covering the outside with olive or tan mesh will help break it up further.
Having lush vegetation near your blinds will help break up their boxy appearance and make them look more natural.
When the blind is alone and there is little surrounding coverage, effective brushing is paramount. To further break up the boxy appearance, drive posts into the ground near the blind and attach small oak or willow trees to them. Dot them at different heights and spacing to mimic a thicket and add a natural look to your project.
final touch
I’ve seen blinds with TVs, kitchens, boat slips, and fancy furniture. The only thing missing was a bedroom. This way you never have to go home. Padded seats and space for a heater are enough for most people. Shelves on the front wall will come in handy for storing extra boxes of shells, as well as a cup of coffee. Don’t forget a place to stash your shotguns, where they’ll be safely out of the way when not in use but readily available. Placing traction tape in strips on the floor can prevent slipping.
The best thing about the project is the fulfillment you will get after the first hunt in your new blind. For me, every opening day, every year, brings the same result. All the hard work I’ve put into building and maintaining my home over the years manifests itself when the first group of ducks race through the wood. For so many reasons I can’t help but smile.
Where do you put duck blinds?
Specifically, look for coves where wood ducks and mallards will find forage, like small aquatic plants collecting on the surface. An inlet like this may be the ideal place for your duck blind, but there are few other factors you’ll need to consider first.
Hard sided blind on jon boat
Where you place your duck screen mainly depends on the species of duck you are going to hunt. And usually the determining factor in which duck to hunt depends on what species of duck you like to eat. I’m not a big fan of the taste of “divers”, ducks like bluebills or canvasbacks. Being carnivores, they have a fishy taste that I can’t stand. Teal are delicious, but the season is short and I never seem to be able to find the time. So I’m going to focus on blind placement of mallards and wood ducks. In my opinion these are some of the tastiest waterfowl and a good challenge to hunt.
The regular season for the High Plains Mallard Management Unit begins on November 1st. Hunting on public land or water is logistically more complicated than hunting on private property. So first, let’s talk about where to place your duck visor on a private pond or lake. If this describes your situation and you have already optimized your pond to attract waterfowl, you may want to consider blind placement from late mid to late October.
Evaluate your pond’s profile to identify blind placement options.
The first thing you should do is assess the profile of your pond. In particular, look for coves where wood ducks and mallards find food such as small aquatic plants that gather on the surface. An inlet like this might be the ideal place for your duck visor, but there are a few other factors to consider first.
The prevailing wind will affect where you place your duck visor.
Ducks prefer to land upwind, upwind. It makes it easier for them to get up and down on the water. So once you’ve figured out where the ducks are most likely to land, you need to find a way to position your shade so that the wind is at your back when they do so. Check the weather about a week to ten days before the season starts to see the prevailing wind pattern and adjust your shade accordingly. This way there will be a brief moment where your target will appear almost stationary, allowing you to take your shot.
Place your duck blinds where the sun is in your favor.
Another consideration when deciding where to place your duck blind is where the sun will be during the hunt. In a perfect world, I would position my duck visor so that the wind is at my back and the sun is rising somewhere behind me. I don’t have to face directly west, but if the sun can be in the ducks’ eyes and not in mine when they land, that’s an advantage I take.
Optimize your duck blind position.
Once you’ve decided where to place your duck blind, there are a few other things you can do to increase your chances of a successful season. First, there is the problem of camouflage. Cloaking your aperture may seem obvious, but I’ve seen too many hunters underestimate the importance of camouflage to ignore the discussion of it. If you’re using a product like Fast Grass, be sure to add local plants to help the blind blend into your environment. When you think you’re done adding camouflage, add more. If you think you’ve overdone it, a good test is to use a drone (if you or your buddy have one) to get a bird’s-eye view of your blind. You’ll be surprised how the blind looks from the sky and let’s face it, that’s the only view that matters.
Another way to tweak blind position is with your decoy pattern. There is a lot of information on this subject on the World Wide Web, so I will keep my comments very brief. Use your bait pattern to herd the ducks into your blind; Use movement to create lures wisely. Don’t use baits that don’t look like it. Good?
Don’t let bad decisions ruin your season.
If you’ve invested in forage plots and a duck hunting screen, this might go without saying. But it’s easy to get caught up in the moment when the sun is just rising, the mist is on the water and you can hear wings flapping overhead. So, before you and your friends take your places in the hideout, go over the basics of gun safety and establish your lines of fire. It only takes a minute or two and could prevent a life-changing accident.
DIY Hard Side DUCK BOAT BLIND (Duck Hunting)
See some more details on the topic hard side duck boat blind here:
Hard sided duck boat blind – ALDEER.COM
Does anyone have experience having one of these on their boats? I think I’m going to build one at some point later this summer.
Source: www.aldeer.com
Date Published: 5/8/2022
View: 4639
Bust’Em Boat Works – Custom Fit Duck Hunting Boat Blinds …
Offering the most innovative custom waterfowl boat blinds, hunting boats and accessories. Now featuring Havoc Boats & Beavertail Boat Sales.
Source: bustemboatworks.com
Date Published: 11/26/2022
View: 8826
Why? Hard blind vs. non | Duck Hunting Forum
I have never hunted out of a hard sed boat blind. Thinking of building a boat blind but wasn’t going to do a hard se cause I won’t want …
Source: www.duckhuntingchat.com
Date Published: 5/10/2022
View: 4002
How to Build the Ultimate DIY Duck Blind
Build a robust takedown blind on a workman’s budget. Tim Romano
Difficult for cash? Don’t let your financial problems get in the way of your duck hunts. With a little work, you can build a roomy three-man duck roller blind for just $50. Tyler Baskfield, Colorado Front Range duck guru, guided me through the steps.
One of the main advantages of the roller blind, as I soon found out, besides its affordability, is its ease of transport. Baskfield hunts by a river and would blindly lose his plywood every spring if he didn’t remove it due to rising waters. Carrying rolled up pieces of carpet is easier than lugging plywood to its place every year. The blind is also great for people who don’t own the land they’re hunting and can’t build a permanent structure. All in all, the roller blind not only saves you money, but also the time and energy required to set up a more temporary facility.
Here’s what you need. Tim Romano
deliveries
Five metal T-posts • 12 hose clamps • 6 1×1 inch boards • 1 2×4 board • A few dozen heavy duty cable ties • 4 different muted colors Spray paint • Tape measure • Industrial carpet* • Shovel • Flat head screwdriver • Hand saw
Helpful Articles
Post Driver • Drill • Saw tooth • Knife • A handful of deck screws
Step 1 Tim Romano
Start by cutting two 9×5 foot pieces of carpet. These form the front and back of the blind. Next, cut a 6×5 foot piece for the side without a door and a 4½x5 foot piece for the side with the door. Then cut a 9×8 foot piece for the ceiling. The size of the ceiling piece depends on how much space you want to photograph. Tip: Measure and cut the carpet before you head out to mount the blind. It’s a pain to do it on the field.
Step 2 Tim Romano
Measure an 8×5 foot rectangle on the ground and drive a T post into each corner. The T-posts should rise 4 feet off the ground. Drive the fifth T-post on the side you want the door about a foot and a half from the front of the blind. Tip: A post driver is handy for this step, but not essential.
Step 3 Tim Romano
Place the 9×5 foot pieces of carpet directly under the top of the T-posts and begin to secure them with zip ties to form the front and back panels of the shade. The best way to do this is to poke holes in the carpet with a knife and then thread the zip ties through, starting at the top of the T-post and working down. Space the zip ties about a foot apart and run along the posts. Attach the two shorter pieces of carpet to the sides of the blind in the same way; the 4½x5 piece is for the side with the door.
Note: The dimensions of the carpet pieces above are slightly larger than the blind’s dimensions, so you can cut and tighten them as needed. This is a duck blind, not the Sistine Chapel – you just need to make sure each side of the blind is covered.
Step 4 Tim Romano
Place the 1×1 inch boards vertically on the inside of the T-posts and secure with the steel screw clamps. Do this like you did with the zip ties by making holes in the carpet and threading the staples through. To ensure the boards are stable, use three clamps on each corner of the blind. You can tighten the clamps with a flathead screwdriver, but a drill will speed up the process.
Step 5 Tim Romano
Stand in the blinds and determine how high you want the front and back of the ceiling to be. Pretend you’re aiming your shotgun at different points in the sky to see what feels right. The front should be slightly higher than the back. Then use a handsaw or sawzall to cut the 1x1s to the appropriate height.
Step 6 Tim Romano
Screw the 2×4 board between the rear vertical posts of the blind. On the sides of the blind, attach the last two 1×1 boards to the front and back jambs. (We used driftwood instead.) Deck screws or screw clamps work well if you don’t have a drill or screws handy. So you should now have the 2×4 board running across the back of the shade and the 1×1 boards down the sides. Tip: If there are long, relatively straight pieces of wood in the area, you can use them for the roof supports, as we did. This further reduces supply costs.
Step 7 Tim Romano
Pull the 9×8 foot piece of rug over the top of the wood frame, then secure it with zip ties around the perimeter and pull tight as you go. The carpet is heavy and may sag. To keep the piece of ceiling from obstructing your view, you can cut a semi-circle out of the front section if needed. This gives you more sky to see birds. Tip: If the ceiling is too low, grab a shovel and dig up the ground as much as you need.
Step 8 Tim Romano
Spray the outside of the blind as desired. Breaking up the sides with shadows and lines goes a long way in obscuring the bezel. However, look around and try to mimic the color and texture of nearby vegetation. Tip: Always use flat finish spray paint. Primer is inexpensive and effective.
Step 9 Tim Romano
Shovel dirt or sand around the base of the blind to hide them where they hit the ground. This will also help insulate and strengthen the structure.
Step 10 Tim Romano
#10. Cover the blind with dead vegetation. Start with big pieces and then work your way down to small things. If you are in or near a corn field, you can zip stalks to the structure instead. Or if you happen to have pastures in the area, cut down some before building the blind; They keep their leaves when they die and make for good camouflage.
Now go and make a bunch of mallards.
The finished product, ready to use. Tyler Baskfield
You can find discarded industrial rugs at construction sites, but if you must buy some, buy a piece large enough to wrap a 5×8 foot box with a roof. We had to buy a piece and it cost us an additional $50.
TIED TOGETHER:
My Ultimate Duck Blind
by Wade Bourne
What’s in a Duck Blind? There’s wood and nails, maybe a coat of paint and some camouflage netting or burlap, topped with cut bush or swamp grass. But there is much more to a duck roller blind than meets the eye. There is hard work, ingenuity, and the hopes and dreams of the hunter or hunters who built it.
Two summers ago, my hunting partners and I built a new hide, applying much of what we’ve learned over several decades of duck hunting. It’s not the biggest or grandest blind ever made. But over the past two seasons, this shade has proven itself in terms of concealment, comfort and shooting.
Below is an overview of our roller blind including where we built it, its design and dimensions, the materials we use, our camouflage scheme and the special features we added for comfort and safety. I wrote this article with two intentions. The first was to stimulate the imaginations of fellow duck hunters. Maybe some of our ideas can be used in their blind designs. The second purpose was to celebrate the ingenuity and exuberance of the Duck Blind architects everywhere. No two blinds are the same, but all hunters share the same sense of accomplishment when the ducks take to the bait, wings hollow and feet down, as if the blind wasn’t even there.
Location, location, location
As with real estate, one of the most important considerations when building a duck blind is location. First and foremost, a blind needs to be where ducks want to go. The prevailing wind and the position in relation to the sun are also important factors.
Our blind sits in a shallow open pond on our Middle Bar Farm in far western Kentucky. The louver faces northeast just 75 yards from the east bank of the Mississippi River. During waterfowl season the wind usually blows from the west, so this orientation puts the breeze at our backs – and the ducks at our faces – on most hunting days. The sun rises to the right of the blind and creeps southwest as the day progresses, so we don’t have to look directly at the sun on days with blue skies.
The pond is a seasonally flooded 4-acre swamp in an agricultural field. We try to keep the water level about knee deep throughout the hunting season. We also keep the pond clear of vegetation to ensure our lures can be seen by waterfowl trading across the river channel or adjacent bottom.
Design, dimensions and materials
The bottom of our blind is 8 feet front to back and 20 feet wide. The blind stands on 4″ x 4″ pressure treated posts (cast in) cross braced to 2″ x 8″ ground joists. All frames (for floor, walls and roof) are built on 16 inch centers. The floor itself is roughly cut 1 inch thick oak planks that we purchased at a local sawmill. We nailed the boards flush to one another, but as they aged the boards came loose easily, providing a drain for rain and water dripping from boots and wet dogs.
We covered all of the walls and roof with 1/2 inch thick treated plywood. For added weather protection, we’ve covered the plywood on the roof and the outside of the rear wall and sides of the blind with a rubberized waterproof fabric. The back wall of the shade is 56 inches high, providing plenty of headroom for hunters seated in chairs at the back of the shade.
The roof of the shade extends 4 feet forward from the back wall. The front of the roof is supported by a 2 x 4 that runs the length of the blind (side to side) at a height of 62 inches. Thus, the roof slopes down 6 inches from front to back. Additional support is provided by two 4″ x 4″ posts placed under the roof beam.
The front wall of the blind slopes 12 inches inward toward the roofline and is 56 inches high from its top edge to the floor. The roller blind features six shot holes separated by partitions that run from the top of the wall to the front of the roof. Each divider consists of two sections of 2 x 4s. We left a 2″ gap between the 2 x 4s, making each divider 6″ wide. These bulkheads serve three purposes: they break up the open space between the roof and front wall, provide a framework for attaching camouflage to cover bullet holes, and connect the front wall to the roof for greater structural integrity.
We covered the bullet holes with camouflage drop down panels. The 33″ x 31″ panels are made of heavy gauge hog wire and cut to fit any shooting hole. We welded 4″ metal hinges and support plates to the bottom of each panel and attached them to the top joist of the front wall with screws. The panels can be swiveled up and down thanks to the hinges. As we hunt, we keep the panels upright, which are mounted on angled wooden blocks nailed to the dividers. When ducks come within range, we push the panels forward until they fall out of the way, giving each of us a free shot.
A raised shooting platform, 2 feet wide and 5 inches high, runs the length of the blind just below the shooting holes. This platform is made from 1 inch thick oak planks supported by 2 x 4s on the end. The front edge of the shooting platform is set back 12 inches from where the floor meets the wall. (The space between the wall and the shooting deck is a handy storage area for shotgun cases, blind bags, etc.)
Hinged doors that swing outwards and stair-like steps at either end of the blind allow for easy entry and exit. A retrieval platform and ramp are built into the right front corner of the shade. The platform is separated from the rest of the blind by a double door to prevent my labrador Andy from becoming an uninvited guest.
Creating a stealth effect
Ideally, a duck blind should blend into its surroundings. Since our blind is standing alone in an open pond, we had to get creative. Instead of making our blind disappear, we camouflaged it to look like something harmless – in our case, a pile of bushes in the middle of a field.
To achieve that stealth effect, we started by coating the newly built structure inside and out with drab olive latex paint. (We used a rented air compressor and a generator-powered paint sprayer to get this job done quickly.) Then we covered the entire blind with army-stock camouflage netting and cut out the bullet holes and doors. We nailed a layer of rusty wire mesh over the mesh to create structure for the natural vegetation to be attached. Our final layer consisted of an abundance of oak and willow branches (cut green) along with a handful of vines and weeds native to this riverbed environment. We attached all of the vegetation to the wire with heavy duty black plastic zip ties. We took special care to camouflage the partitions between the shot holes so the openings are tight and tufted.
Next we covered the panels over the firing holes with pieces of camouflage netting and small oak and willow branches, which we also zipped to the hogwire. When these panels are up, hunters can see through them and watch ducks at work without being seen. (When it’s time to shoot, everyone knows where the ducks are.) We camouflaged the retrieve platform and ramp by building a hogwire tunnel that we covered with brushes zip-tied to the wire. This camouflage tunnel hides everything but Andy’s head while he’s on the lookout for ducks.
For added camouflage, we built camouflage “screens” around both ends of the shade, giving a hunter room to wade between the shade and the screens. We made our privacy screens by hammering metal fence posts into the ground in a semicircle around the ends of the blind and attaching man-high wire fences to the posts. Then we completely covered the wire with a thick brush secured with zip ties. The screens help break up the blind’s outline and provide additional coverage for the doors and steps. The screens also provide easy camouflage for hunters caught outside of the hideout when ducks appear. (It’s remarkable how often this happens during a hunt.)
To further soften the boxy appearance of the blind, we drove several more metal fence posts into the ground at random intervals and spacing around the blind. Then we attached small oak and willow seedlings to the posts to look like naturally growing trees. We also fertilized a 5 yard border around the blind to encourage growth of native grasses and weeds and enhance the natural appearance of the blind.
The result of all these efforts was a “thicket” that lacked any trace of straight lines or square corners. And thanks to the blind’s inward-sloping front wall and perimeter seedlings attached to fence posts, hidden hunters are located in the center of the cover rather than the front edge. This allows us to push the shooting boards forward and get up to shoot unnoticed.
The three main functions we want in a blind are hidden, comfortable and able to enjoy each other’s company. Our blinds fully meet all of these requirements. It frequently gives us close-up shots of unsuspecting ducks. It’s comfortable enough to keep us “on station” when the flight is slow and the morning is long. And it’s the perfect setting for our stories and jokes, which are as much a part of duck hunting as the ducks themselves.
Form follows function
Two time-honoured axioms in architecture are “less is more” and “form follows function”. Our blind is maintenance friendly and easy to maintain in its simplicity. Over the past several years, my partners and I have built blinds with back rooms, full kitchens, flush toilets, heating systems, electric lights, and other conveniences. I’ve shared the blinds of other hunters outfitted with TVs, dormitories, and theater seats. A blind man even had a PC with internet access.
Our new blind doesn’t include any of those luxuries, but it does everything we’ve come to expect from it. It completely hides us from the keen eyes of our prey. It’s incredibly cozy – but if it’s really cold we’ll bring a portable heater. We have a lot of freedom of movement and don’t need a kitchen as we rarely cook in secret. (Our cabin is only a five-minute ATV ride away, and these days we prefer to eat at a table on clean dishes.)
Little extras for comfort and safety
We have equipped our blinds with several additional features for comfort, convenience and security. Instead of a hard bench seat, we sit on Coleman portable lounge chairs. These folding chairs are very comfortable and can be arranged as you wish. Unoccupied chairs can be folded up and stacked along the back wall. I also have a bar stool with a rotating seat on one end of the blind, which is a great spot to scan the sky for birds when the action is slow.
We built a waist-level shelf along the interior front wall to store seashells, phones, coffee mugs, binoculars, and other miscellaneous items. We attached a piece of wood paneling along the outside edge of the shelf to keep loose shells and other items from rolling off. For safety reasons we nailed a gun barrel holder into the wall in front of each shot hole to keep the shotguns safe and out of the way. We’ve also nailed strips of non-slip tape to all steps to prevent slipping and have a can of sand in the blind for extra cold days when ice can form on the floor. A handful of sand sprinkled on the shooting platform provides traction and surefootedness.
Hard sided blind on jon boat
Not for me… My hardside “folds down”. I designed it because I hunt alone a lot. I’ll try to describe it, it’s buried in my barn so no pictures at the moment. My boat is 16 feet long and ~80 inches at the top. It has catwalks on the side that make the opening “rectangular”. I built walls about 12 inches straight up on the catwalk. I used 1 1/2 channel top and bottom and 1 1/4 square tubing for the studs. Think of a house wall….the pipe fitted into the duct and pop rivets held it in place until I welded it. I attached bimini deck hinges to the top panel and built a similar frame for the sloping portion of the blind. The underside of the cleats received square tube bimini hinges. I used some material I had on hand from previous blinds. When the wind is strong and I need to load I just drop the sides and the boat is only 12 inches or so… I have about 20 inches between the two sides when they are down. Enough to maneuver in an emergency. I run a mud hull with no keels and with a short stern so cross winds really blow the boat around with the blinds up. I’ll try to get some pictures.
Related searches to hard side duck boat blind
Information related to the topic hard side duck boat blind
Here are the search results of the thread hard side duck boat blind from Bing. You can read more if you want.
You have just come across an article on the topic hard side duck boat blind. If you found this article useful, please share it. Thank you very much.