Are you looking for an answer to the topic “j tool for thumb turn locks“? We answer all your questions at the website https://chewathai27.com/ppa in category: https://chewathai27.com/ppa/blog. You will find the answer right below.
Table of Contents
Are thumb turn locks secure?
Thumb Turn Cylinder
Thumb turn cylinders use a key on the exterior side of the door and a thumb turn on the interior side. They are a good security solution as residents can lock and unlock their doors without the need for a key.
Why would you use a thumb turn tool?
This useful tool reaches between the gap on double doors to activate thumb-turn deadbolts. It also works on security grates and grilles. This tool is especially useful for first responders to avoid destructive entry on commercial doors.
What is a Shrum tool?
A Traveler Pick or Shrum Tool is used to open most Spring Latched or Deadlatch locks. Depending on the type of lock and whether the door opens outwards or inwards determines the correct technique for using the Traveler Pick.
Home Door and Lock Security- Home Security Guide by Keytek®
A traveler pick or shrum tool is used to pick most spring latched or deadlatch locks. The right technique for using the Traveler Pick depends on the type of lock and whether the door opens outwards or inwards. This tool makes it easy to work with door spring latches commonly found in commercial and hospitality buildings.
This hook can also be used to remove locks for rekeying, repinning or repairing.
Our hooks are made of non-magnetic steel.
What is AJ tool used for?
The J-Tool activates the panic hardware or the mortise slam latch paddle and tricks the door into thinking you are someone exiting the structure.
Home Door and Lock Security- Home Security Guide by Keytek®
The J-Tools (double door tool) are made by Firefighter right here in Virginia. These are high quality, high strength and precision engineered. The J-Tool activates the panic hardware or mortise slam bolt paddle and fools the door into thinking you’re someone exiting the structure. These can also be heated or cooled and used to bypass passive infrared motion sensors. Any type of action you can achieve with the tool (panic hardware, exit request buttons, panic paddles, individual doors without doorstops, REX PIR sensors) allows access and entry. These doors are commonly found in schools, theaters, shops and office buildings.
Customer Reviews Based on 1 review Write a review 0% (0) 0% (0) 0% (0) 0% (0) 100% (1) B Brandon McVeigh Way too big to carry It’s way bigger than your gym bag. You are 100% right. This tool is not intended to be carried in a pocket. This tool is designed to be carried in your tool bag. Sorry if this wasn’t clear in the description.
How do you break a door lock from the inside?
Use a small screwdriver or thin tool on interior doors.
Push an eyeglasses screwdriver, a paper clip hammered flat, or a very small butter knife into this hole. Push it straight through as far as you can, and turn or twist it until it catches a groove and the lock clicks open.
Home Door and Lock Security- Home Security Guide by Keytek®
Article overview
X
You can use a credit card to unlock a spring lock door. Make sure you use an old card in case it breaks! Insert the card between the lock and the door frame, and then bend the card back to open the lock. For an interior door with a small hole in the handle, you can use a small screwdriver to unlock it. Simply insert the screwdriver into the small hole and use it to press the button on the inside of the handle to unlock the door. You may need to twist the screwdriver to unlock the door. To unlock a door with a keyhole, you can pick the lock with 2 bobby pins. Bend the closed end of one of the bobby pins to form a 90 degree angle. Bend the second bobby pin into a long, straight hook that curves up at one end. Insert the curved end of the first bobby pin into the bottom of the keyhole and twist in the direction you would turn the key. Maintaining pressure on the first bobby pin, then insert the angled end of the second bobby pin into the top of the keyhole. Use the bobby pin to push up the pins in the lock one at a time. Once you push all the pins up, the inner cylinder rotates and the door unlocks. Read on to learn other ways to unlock a door, such as: B. removing the hinges or breaking the lock!
How do thumb turn door locks work?
Now, you might wonder, “How does the thumb turn lock work?” In the simplest terms, you set the thumb turn clockwise to lock, and anti-clockwise to unlock. The mechanical explanation behind this is: when twisted, the thumb turn operates a deadbolt to lock/unlock the door from the inside of the bathroom.
Home Door and Lock Security- Home Security Guide by Keytek®
Sound familiar? Avoid this awkward situation when installing a bathroom knob lock. This technological solution might not be the latest gadget nor the next big thing to turn your bathroom into a high-end oasis. But these privacy locks are an irreplaceable, budget-friendly, and easy way to achieve a relaxing bathroom experience.
Now you are probably curious to know:
“What is a knob lock and how does it work?”
“How do I install this bathroom privacy lock?”
“What tools and materials do I need to install it properly?”
Luckily, Fantastic Services locksmiths have the answers to all your questions. We’ll walk you through the basics of installing a knob lock and we promise it’ll take you under 2 hours. So read this article if you are someone who wants privacy, live with the elderly/the mobility impaired/little ones or just want to upgrade the door lock.
Everything you need to know before fitting a knob clasp
What is a knob lock?
Like any standard lock, the bathroom rotary knob lock (aka turnkey rotary knob lock) helps you prevent unwanted intrusion and embarrassing mishaps. So you never have to worry about your privacy by turning a small knob. The difference comes from:
the highly specific knob shape – knob in oval/crescent shape;
– button with oval/crescent shape; How the bathroom privacy lock works – unlike the other locks, these can quickly open a door from the outside.
Now you might be wondering, “How does the thumb twist lock work?” Simply put, twist your thumb clockwise to lock and counterclockwise to unlock. The mechanical explanation behind this is that when the knob is turned it operates a latch to lock/unlock the door from the inside of the bathroom. As simple as that.
What’s more… Turn your bathroom into a place of relaxation with a turning knob. You can enjoy a relaxing shower, bath or your intimacy needs while avoiding awkward moments.
You can enjoy a relaxing shower, bath or your intimacy needs while avoiding awkward moments. This bathroom lock is easy to use and secure. You can board at any time if an accident happens to your children or vulnerable adults;
You can board at any time if an accident happens to your children or vulnerable adults; You can enjoy the comfort and durability you deserve. Some models have a “busy/unbusy” indicator to indicate the locked/unlocked status of the door. So you no longer pull the handle and make unnecessarily violent input attempts. How to choose a twist and release bathroom lock? You want a durable bathroom knob latch that runs smoothly, resists corrosion and will stand the test of time, right? Here’s what you need to know about these quality bathroom locks: The most reliable bathroom locks are ISO 9001 and BS EN 12209 compliant;
Because you rely on your bathroom door at least 5 to 10 times a day, you need a lock that’s built to withstand heavy use. The best bathroom locks fall into the Class 1 (>10,000 turns) and Class 2 (>25,000 turns) categories, so make sure you pick one of those;
Complement your bathroom lock with your current plumbing fixtures. For example, if your faucet and shower are made of polished nickel, you might not want to go for a medium bronze bathroom knob. Whichever model you choose, it pays to invest in a quality product so your new door hardware will last a lifetime;
The turnkey itself and the bathroom knob lock set are available in many variations and as standalone products to meet every need. If there’s no indication that a door handle comes with a twist-and-release lock, get the latch mechanism and other parts to make sure they all work together and keep the door secure.
Still confused? If you are unfamiliar with the lingo and bathroom knob lock set, check out the main parts:
Locking mechanism (pretty self-explanatory) Door handle – note both types: rosette handle and backplate handle – these are a natural choice; Cover Plate – the decorative metal plate on the edge of the door that protects the door hardware; Knob – the rotating part that locks/unlocks the door. Strike Plate (Door Opener) – the rectangular piece of metal that fits onto the door jamb. It includes a hole where the bolt/latch extends to close the door.
Before purchasing a rotary knob latch mechanism, remember to measure the door’s side rails to make sure they will fit.
Tools and materials you will need
Is there a weekend where you have nothing planned? It’s a sign that this is a good time for your home improvement endeavors. Before you begin, make sure you have all the essential tools you’ll need to complete the bathroom privacy lock installation project:
Rotary knob for the bathroom
Bathroom Knob Bathroom Door Lock/Latch
Bathroom door lock / deadbolt chisel
chisel hammer
Hammer drill with drill bits
Drill with drill tape measure
tape measure tape measure
Duct Tape Pencil
pencil screwdriver
screwdriver screws
screw goggles
Once you’ve decided on the bathroom knob clasp and you’re ready to go to work, it’s time to put it on. We warn you that the task can be tricky, tedious and cause hammering glitches. It is therefore better to follow the assembly instructions for knob locks from the professional. Or leave it to the locksmiths if you don’t feel secure enough.
Need a lock specialist on site to install your bathroom privacy lock? Fantastic Services is here for you Add a valid zip code e.g. SE1 2TH We are certified:
How to mount a knob lock in the bathroom
Installing a knob lock on a new bathroom door is straightforward. But if you want to replace your tarnished, outdated or defective lock with a knob, you have to go one step further: dismantling the existing door fittings. This means you have to unscrew the current locking mechanism and change the hole/holes to fit the new swivel and release set.
This task might be challenging, but you never know until you try. So let’s start with a few tips on how to install a bathroom knob lock on a new door:
Step 1. Measure where your new lock will sit on the door
When open, the door can move back and forth. So use an extra hand to help, a piece of wood, a book or wedge to prop it up before drilling. Then step number one is to use the body of the lock as a template and mark the desired lock position.
No rules here. All you need is a place that is accessible, functional and offers you ultimate comfort. As a guide, the height of your lock should be about 1m off the ground.
Use a regular pencil to mark the top and bottom of the door latch mechanism on the door. Then locate the door edge center point and draw a straight, vertical line through the marked points to aid in the drilling process.
Step 2. Drill a hole for the door lock
What is a Thumbturn key?
Thumbturn Euro Cylinders, or Key and Turn cylinders, allow you to lock the door with a key from one side, and use a turn or snib on the other side. Ideal for locations that require controlled access from one direction and easy access from the other.
Home Door and Lock Security- Home Security Guide by Keytek®
Knob euro cylinders or key and turn cylinders allow you to lock the door with a key from one side and use a turn or latch on the other. Ideal for sites that require controlled access from one direction and easy access from the other. For example, this type of cylinder can be used on doors such as interior doors of offices or meeting rooms, or in doctor’s surgeries where privacy is sometimes desired but don’t need to hang bunches of keys on the doors! Don’t forget that many of these euro knob cylinders can be keyed alike or included in a master key suite, giving you even more security and peace of mind.
Within our range of knob cylinders we also have a ‘classroom’ cylinder which essentially provides an anti lock out solution, ideal for use in schools or similar settings where the more mischievous student might try to trick a teacher on it prevent them from returning to the classroom. Even if the curve is held tightly to prevent the lock from loosening, the key holder on the other side can unlock the door with the key. For more information, see: High Security Classroom Cylinder Lock
How do you bypass a deadbolt?
- Pick the Lock. Lock picking is the first and best method to unlock a deadbolt without a key. …
- Bump the Lock. Another very effective tactic for bypassing deadbolts without the original key is lock bumping. …
- Drill the Lock. …
- Break the Glass. …
- Call a Locksmith.
Home Door and Lock Security- Home Security Guide by Keytek®
Deadbolts have fewer weak points than traditional doorknob locks, but they’re still pretty easy to defeat with the right approach.
In this guide, we will discuss several common techniques for unlocking pin tumbler deadbolts, including picking locks, poking locks, and drilling the lock.
With a little patience and practice, you can unlock just about any quality deadbolt without a key. So next time you’re locked out, keep these tips in mind and you’ll be back in in no time.
Let us begin!
1. Pick the lock
Lockpicking is the first and best way to unlock a deadbolt without a key. It’s a popular choice for those who want to avoid damaging their door or lock.
Lock picking is easy to learn – the basics required to pick a standard pin tumbler bolt can be learned in 10 minutes. All you really need to know is the barebones basics behind how locks work and some of the techniques used to pick them.
In addition to this basic knowledge, you will also need lockpicking tools: a pick and a wrench. You can find these tools in our online pick shop.
If you’re in a pinch and have the materials on hand, you can make makeshift lock picking tools out of bobby pins, paper clips, or other stiff and thin metal.
However, improvised picks are too large to fit in the keyway. In that case, you’ll need a professional or hobbyist lock pick set designed for use in small or parametric keyways.
Check out our selection of lock picking kits for a good everyday carry set and never fear getting locked out again! You can even carry around a wallet-sized lock pick set for emergencies!
If you want to try lock picking, I’ve written several very comprehensive guides on how to pick locks using different tools, complete with animations and step-by-step instructions.
Check out the guides below:
This approach has some disadvantages. If you’re using a high-security deadbolt, or if your lock uses anti-pick features like security pins, you probably won’t be able to pick it without considerable practice.
Additionally, the internal components of locks can be fragile and if you are unlucky you may damage something – e.g. B. break a spring.
Only open your lock if:
You own the lock (if you rent it you don’t own it) You understand that there is a small risk of damaging the lock.
Picking locks has its downsides, but it’s still a powerful way to unlock a deadbolt without a key.
2. Hit the lock
Another very effective tactic for bypassing deadbolts without the original key is bumping the lock.
Lock bumping is a technique that uses a ground down key called a “bump key” that has been cut to its maximum depth.
You can buy pre-made bump keys online for your particular latch, or you can make your own.
However, to make your own, you’ll need access to another key that you’d like to destroy that also fits in your latch’s keyway, and a tool to grind that key down. Both items are available at almost any local hardware store.
Watch the video below to create a bump key.
Once you have your bump key, it’s time to get to work!
Insert it all the way into the key, then slowly pull it back until you hear the rearmost pin click into the lock. Then exert a slight twisting pressure on the button.
Hit the back of the key with a rubber mallet or the palm of your hand and push it sharply into the lock. The teeth of the key hit the pins and send them up. With the right amount of force and a bit of luck, the pins will disengage completely from the lock pin and the lock will open.
While this method is effective against most pin tumbler latches, it may not always work. Higher quality deadbolts can use anti-bumping features that prevent bumping the lock from being successful.
If you’d like to learn more about lock bumping or how to prevent it from being used on your locks, be sure to check out my comprehensive guide on lock bumping for a deeper dive.
3. Drill the lock
If you don’t mind completely destroying your deadbolt, you can drill the lock.
There are multiple ways to successfully drill a lock, and many different regions to aim your drill at. You can drill the shear line, the bottom pin stack (key pins), the top pin stack (drive pins), the springs, or even the screws that hold the latch to the door.
The best way to know which method to use in which situation is to understand how a lock works and what common anti-drill countermeasures are typically used. Anti-drill components are typically harder steel or ceramic parts that protect vulnerable areas.
For example: if you look into the keyway and see a steel pin instead of a brass pin, your latch probably uses hardened anti-drill pins, which are more difficult to drill.
Inexpensive latches don’t typically use anti-drilling countermeasures, however, so you can probably just aim for the shear line by drilling just above the keyway.
To drill a lock, do the following:
Pick a spot to drill and start with a small drill to drill a short starting hole to guide a larger drill. Start with a 1/8″ drill bit and start drilling until you feel your drill bit go through 5 pins. Upgrade to a 1/4″ drill bit and repeat the process. Insert a flathead screwdriver into the keyway and try to turn the lock.
If it doesn’t open, look in the hole and see if there’s the 6th pin. If there is another pin, drill a little deeper to wipe out that pin as well, then try picking the lock again.
If there isn’t another pin and the lock won’t open, you may need to upgrade to a slightly larger drill to deal a bit more damage!
4. Break the glass
If there is a pane of glass on the door you want to bypass, or if there is a window within range of the deadbolt’s knob, you can break the glass and reach through to dislodge the lock.
Unless it’s an emergency, I really don’t recommend this approach. Reaching through a broken window can leave you in more trouble than you had when you started. Not to mention that replacing glass can be more expensive than simply calling a locksmith.
Speaking of locksmiths!
5. Call a locksmith
If all else fails, you may have to call a locksmith to unlock the door. Most locksmiths have the tools and experience to pick just about any door without damaging the lock.
Also, locksmiths typically charge a lot less than the cost of replacing a broken lock, door, or window. The average lockout cost is around $150, but that depends on your location and the locksmith. Learn more about calling a locksmith and how much it costs here.
If you’re stuck and don’t know what to do or don’t have the tools, your best bet is to contact a locksmith.
Why deadbolts are a little harder to avoid
Most exterior doors use two different types of locks: a deadbolt and a doorknob (also called a “bolt”).
Doorknob locks use a spring that automatically pushes and holds a deadbolt into the door frame when the door is closed.
Because the latch is held in place using a spring, it is vulnerable to any attack that can pull the spring back. A popular attack called loiding involves sliding a thin piece of material (such as a credit card) between the cracks in the door and squeezing the spring latch.
In contrast, latches do not use a spring. Rather, they have to be drawn in mechanically using a key or knob. Because of this, they cannot be loosened and it is much more difficult to manipulate the bolt directly.
This will prevent you from locking yourself out again
Getting locked out really sucks, but there are a few ways you can minimize the chances of it ever happening again.
1. Make sure you have hidden a key in a safe place outside of your home
Your best option is to hide a key outside in a safe place. This could be in a flower pot on your porch, under a rock in your yard, or anywhere else that is unobtrusive and secluded.
If you have hidden a key outside, you can simply retrieve it and let yourself back into your home. No need to call a locksmith or fiddle with the lock!
2. Have a copy of your key made and give it to a friend or family member
If you don’t want to hide a key outside, another option is to give a trusted friend or neighbor a spare key. That way, if you’ve ever locked yourself out, you can simply ask to let you into your home.
3. Replace your deadbolt with a keyless lock
A third option is to use a keyless entry system, such as B. a key lock or an intelligent lock. Keyless entry systems do not require a physical key, so you never have to worry about being locked out again.
Final Thoughts
So there you have it. Whether you’re locked out of your house or just want to be prepared in case of an emergency, now you know how to unlock a deadbolt without a key.
We have discussed four methods including picking locks, picking locks, drilling the lock or breaking a nearby window. Some of these techniques may not work against high security door locks, in which case you can always call a locksmith.
Avoid future lockouts by hiding a key outside, giving a spare key to a friend or neighbor, or upgrading to a keyless entry system.
We hope you never need this information, but it’s always good to be prepared!
Thank you for reading!
How do you bypass a deadbolt?
- Pick the Lock. Lock picking is the first and best method to unlock a deadbolt without a key. …
- Bump the Lock. Another very effective tactic for bypassing deadbolts without the original key is lock bumping. …
- Drill the Lock. …
- Break the Glass. …
- Call a Locksmith.
Home Door and Lock Security- Home Security Guide by Keytek®
Deadbolts have fewer weak points than traditional doorknob locks, but they’re still pretty easy to defeat with the right approach.
In this guide, we will discuss several common techniques for unlocking pin tumbler deadbolts, including picking locks, poking locks, and drilling the lock.
With a little patience and practice, you can unlock just about any quality deadbolt without a key. So next time you’re locked out, keep these tips in mind and you’ll be back in in no time.
Let us begin!
1. Pick the lock
Lockpicking is the first and best way to unlock a deadbolt without a key. It’s a popular choice for those who want to avoid damaging their door or lock.
Lock picking is easy to learn – the basics required to pick a standard pin tumbler bolt can be learned in 10 minutes. All you really need to know is the barebones basics behind how locks work and some of the techniques used to pick them.
In addition to this basic knowledge, you will also need lockpicking tools: a pick and a wrench. You can find these tools in our online pick shop.
If you’re in a pinch and have the materials on hand, you can make makeshift lock picking tools out of bobby pins, paper clips, or other stiff and thin metal.
However, improvised picks are too large to fit in the keyway. In that case, you’ll need a professional or hobbyist lock pick set designed for use in small or parametric keyways.
Check out our selection of lock picking kits for a good everyday carry set and never fear getting locked out again! You can even carry around a wallet-sized lock pick set for emergencies!
If you want to try lock picking, I’ve written several very comprehensive guides on how to pick locks using different tools, complete with animations and step-by-step instructions.
Check out the guides below:
This approach has some disadvantages. If you’re using a high-security deadbolt, or if your lock uses anti-pick features like security pins, you probably won’t be able to pick it without considerable practice.
Additionally, the internal components of locks can be fragile and if you are unlucky you may damage something – e.g. B. break a spring.
Only open your lock if:
You own the lock (if you rent it you don’t own it) You understand that there is a small risk of damaging the lock.
Picking locks has its downsides, but it’s still a powerful way to unlock a deadbolt without a key.
2. Hit the lock
Another very effective tactic for bypassing deadbolts without the original key is bumping the lock.
Lock bumping is a technique that uses a ground down key called a “bump key” that has been cut to its maximum depth.
You can buy pre-made bump keys online for your particular latch, or you can make your own.
However, to make your own, you’ll need access to another key that you’d like to destroy that also fits in your latch’s keyway, and a tool to grind that key down. Both items are available at almost any local hardware store.
Watch the video below to create a bump key.
Once you have your bump key, it’s time to get to work!
Insert it all the way into the key, then slowly pull it back until you hear the rearmost pin click into the lock. Then exert a slight twisting pressure on the button.
Hit the back of the key with a rubber mallet or the palm of your hand and push it sharply into the lock. The teeth of the key hit the pins and send them up. With the right amount of force and a bit of luck, the pins will disengage completely from the lock pin and the lock will open.
While this method is effective against most pin tumbler latches, it may not always work. Higher quality deadbolts can use anti-bumping features that prevent bumping the lock from being successful.
If you’d like to learn more about lock bumping or how to prevent it from being used on your locks, be sure to check out my comprehensive guide on lock bumping for a deeper dive.
3. Drill the lock
If you don’t mind completely destroying your deadbolt, you can drill the lock.
There are multiple ways to successfully drill a lock, and many different regions to aim your drill at. You can drill the shear line, the bottom pin stack (key pins), the top pin stack (drive pins), the springs, or even the screws that hold the latch to the door.
The best way to know which method to use in which situation is to understand how a lock works and what common anti-drill countermeasures are typically used. Anti-drill components are typically harder steel or ceramic parts that protect vulnerable areas.
For example: if you look into the keyway and see a steel pin instead of a brass pin, your latch probably uses hardened anti-drill pins, which are more difficult to drill.
Inexpensive latches don’t typically use anti-drilling countermeasures, however, so you can probably just aim for the shear line by drilling just above the keyway.
To drill a lock, do the following:
Pick a spot to drill and start with a small drill to drill a short starting hole to guide a larger drill. Start with a 1/8″ drill bit and start drilling until you feel your drill bit go through 5 pins. Upgrade to a 1/4″ drill bit and repeat the process. Insert a flathead screwdriver into the keyway and try to turn the lock.
If it doesn’t open, look in the hole and see if there’s the 6th pin. If there is another pin, drill a little deeper to wipe out that pin as well, then try picking the lock again.
If there isn’t another pin and the lock won’t open, you may need to upgrade to a slightly larger drill to deal a bit more damage!
4. Break the glass
If there is a pane of glass on the door you want to bypass, or if there is a window within range of the deadbolt’s knob, you can break the glass and reach through to dislodge the lock.
Unless it’s an emergency, I really don’t recommend this approach. Reaching through a broken window can leave you in more trouble than you had when you started. Not to mention that replacing glass can be more expensive than simply calling a locksmith.
Speaking of locksmiths!
5. Call a locksmith
If all else fails, you may have to call a locksmith to unlock the door. Most locksmiths have the tools and experience to pick just about any door without damaging the lock.
Also, locksmiths typically charge a lot less than the cost of replacing a broken lock, door, or window. The average lockout cost is around $150, but that depends on your location and the locksmith. Learn more about calling a locksmith and how much it costs here.
If you’re stuck and don’t know what to do or don’t have the tools, your best bet is to contact a locksmith.
Why deadbolts are a little harder to avoid
Most exterior doors use two different types of locks: a deadbolt and a doorknob (also called a “bolt”).
Doorknob locks use a spring that automatically pushes and holds a deadbolt into the door frame when the door is closed.
Because the latch is held in place using a spring, it is vulnerable to any attack that can pull the spring back. A popular attack called loiding involves sliding a thin piece of material (such as a credit card) between the cracks in the door and squeezing the spring latch.
In contrast, latches do not use a spring. Rather, they have to be drawn in mechanically using a key or knob. Because of this, they cannot be loosened and it is much more difficult to manipulate the bolt directly.
This will prevent you from locking yourself out again
Getting locked out really sucks, but there are a few ways you can minimize the chances of it ever happening again.
1. Make sure you have hidden a key in a safe place outside of your home
Your best option is to hide a key outside in a safe place. This could be in a flower pot on your porch, under a rock in your yard, or anywhere else that is unobtrusive and secluded.
If you have hidden a key outside, you can simply retrieve it and let yourself back into your home. No need to call a locksmith or fiddle with the lock!
2. Have a copy of your key made and give it to a friend or family member
If you don’t want to hide a key outside, another option is to give a trusted friend or neighbor a spare key. That way, if you’ve ever locked yourself out, you can simply ask to let you into your home.
3. Replace your deadbolt with a keyless lock
A third option is to use a keyless entry system, such as B. a key lock or an intelligent lock. Keyless entry systems do not require a physical key, so you never have to worry about being locked out again.
Final Thoughts
So there you have it. Whether you’re locked out of your house or just want to be prepared in case of an emergency, now you know how to unlock a deadbolt without a key.
We have discussed four methods including picking locks, picking locks, drilling the lock or breaking a nearby window. Some of these techniques may not work against high security door locks, in which case you can always call a locksmith.
Avoid future lockouts by hiding a key outside, giving a spare key to a friend or neighbor, or upgrading to a keyless entry system.
We hope you never need this information, but it’s always good to be prepared!
Thank you for reading!
[1312] The “J-Tool” Reaches Inside To Open Doors
See some more details on the topic j tool for thumb turn locks here:
Bypass Tool J Tool for Thumb Turn Locks 749212447318 | eBay
It also works on security grates and grilles. Notice : 1. Product upgraded, and there is no chirping sound when turning the handle.
Source: www.ebay.com
Date Published: 2/13/2021
View: 4008
Deadbolt Thumb Turn “J Tool”
This useful tool grabs between the gaps on double doors to activate knob latches. It also works on security bars and trellis. This tool is especially useful for first responders to avoid damaging access to commercial doors.
Note: We try to lubricate all of these upon receipt, but sometimes the lube dries and causes the tool to squeak. This is easily fixed with a spritz of WD-40 or Houdini.
J Tool for Thumb Turn Locks
This useful tool grabs between the gaps on double doors to activate knob latches. Also works on safety gates and bars. This tool is especially useful for first responders to avoid damaging access to commercial doors.
Home Door and Lock Security- Home Security Guide by Keytek®
door security
The front or back door is usually the main entrance into any home for those who live there, but it is also often the point of entry that is heavily targeted by thieves. Securing your door is one of the most important steps you can take to ensure your home and belongings are safe and sound. Take a look at our top tips below for securing your door to the highest standards, and take a look at our home security checklist here to tick off the protocols you already have and find out what’s related Your home security could be improved.
The first thing to consider when evaluating your door security is to look at the actual door itself. Check the door to make sure there are no problems including the handle, mechanism and the lock itself as these could leave your door vulnerable to intruders. Read our guide to repairing a broken uPVC door lock mechanism here.
Security at the front door
A common way burglars break in is by simply kicking down the front door, which either causes the door frame to splinter and fall apart, or the lock to fall off completely. If the door looks sturdy and well-kept, a burglar is less likely to even try to break in the door.
How can I make my front door more secure?
1. Update your locks
Simple but effective. Make sure your locks are not broken, old or rusted to improve your front door security. If you find that your locks need to be replaced or upgraded, it is best to consult a professional locksmith to ensure the work is done properly.
Whether you have a wooden or PVC door, make sure you use British standard locks. This way you can be sure that the locks you use have undergone rigorous testing to ensure they are secure. There is also the option of installing anti-snap or high-security locks on PVC doors. While these may be more expensive, if they prevent a burglar from breaking into your home then the extra expense could be worth it.
It’s also worth checking with your insurer to make sure all of your locks are insurance compliant. If you discover in a burglary that you had the wrong locks, you may not be able to make a claim. Read our guide What to do if your uPVC door or window won’t open here!
2. Check the strength of your door and its frame
You need to be sure that a burglar cannot break in your door, especially if it is made of wood. You can have the best lock in the world, but if a burglar can force his foot through your door, it’s useless. You can reinforce your wooden door by adding a metal striker plate, which is secured with extra long screws drilled into the jambs on all sides of the door opening. Strike plates are available at most hardware stores or can be ordered online. If you don’t feel comfortable installing this yourself, it’s best to hire a professional locksmith.
The door frame is another aspect of front door security that you can improve. The first thing you need to make sure is that it is securely bolted or bolted to the walls around it. You can make it more secure by adding special bars to make the locking points and hinges more stable. You could also try hinge bolts; They should prevent the door from being ripped off its hinges.
3. Consider windowless doors
While a door with windows lets more light into your home and is aesthetically pleasing, it poses a security risk. If the window in your door is close to the lock, a burglar could easily break the window and unlock your door from the inside. If you don’t want to get rid of the windows in your door, you need to add some security measures. Make sure the glass is reinforced and won’t break easily. Another is to install decorative bars or metal reinforcements; This will prevent the burglar from cracking down on smashing the glass, or could potentially discourage them from breaking in all together.
4. Install a latch for a wooden door
Any door is only as strong as its lock, so you need to make sure you have the best available. You must ensure that your lock extends deep enough into the door frame to withstand any kicking or other form of forced entry. Your bolt should be at least an inch long. You don’t need the most expensive bar out there, but it’s probably worth not getting the cheapest. Spending a little more could mean the difference between a successful break-in and an unsuccessful one.
Important points:
Upgrade your locks
Make sure your door and frame are in good condition
Add a bar
Types of front doors
The four most common front door types are uPVC, wood, composite and aluminum. If you’re looking to replace your front door, read below to find out which door is best for you!
The four most popular door material types are uPVC, wood, composite and aluminum. If you’re looking to replace your front door, read below to find out which door is best for you!
PVC doors
uPVC stands for unplasticized polyvinyl chloride, a hard and rigid material similar to PVC but with no additives added during its manufacture. uPVC doors are becoming increasingly popular due to their low cost and relatively low maintenance compared to other exterior door types, but does that mean they compromise on security? No, although they are light, they are surprisingly strong. These doors consist of two components, a cylinder and a multi-point lock (with attached gear).
composite doors
Composite doors are arguably the most secure money can buy. They are made from a blend of durable, high-quality materials consisting of an outer frame, sub-frame and solid core, which are then pressed and bonded under heavy pressure.
Good quality composite doors are expensive, but they are worth it as not only do they offer high security, but they are also very durable and can withstand all weather conditions. Looking like a wooden door from the outside, the inner mechanisms are very similar to a PVC door. Check out our guide to fixing common composite door lock problems here.
wooden doors
Wooden doors are aesthetically pleasing and quite good insulators, but they are high maintenance and require a lot of work as they can warp and fade with varying weather conditions. If you have a wooden door, it’s a good idea to clean the door with a damp cloth and dry thoroughly a couple of times a year and make sure you treat the surface with either a varnish or UV protective paint.
For security reasons, it is recommended that you fit both a “Yale” lock and a “Mortise” lock on a wooden door, which we will discuss in more detail later.
aluminum doors
Aluminum is often used to make doors because it is strong and durable. Like uPVC, it’s surprisingly light, but its strength allows aluminum to hold more glass, making it look more aesthetically pleasing. Aluminum doors are often a popular choice for commercial properties due to the high level of security they offer when combined with reinforced glass and multipoint locking systems.
Important points:
PVC doors are the cheapest and easy to care for
Composite doors are the safest, but the most expensive
Wooden doors are aesthetic, but difficult to maintain
Aluminum doors are less common for residential buildings, but contain a lot of glass.
Is PVC safer than wood?
PVC’s reliability is one of its greatest advantages. Rot is not found in the frame, its solid and impenetrable structure cannot be broken without the use of heavy power tools, providing the perfect deterrent to burglars. Compared to wooden doors that require constant maintenance, check the frame for rot and weak points, which can be a clear sign to burglars that your home might be vulnerable.
What is the most secure front door?
Composite doors are the most secure front door you can buy. A composite door is made up of multiple materials, all working together to reinforce its strength and durability, including but not limited to a solid wood core, insulating foam, fiberglass reinforced plastic, and aluminum. A compound door with high security locks and added security measures like a smart doorbell is a great way to make your door as secure as possible. Please remember that no home is 100% secure from break-ins or damage. Take a look at our blog about the safest home in the world here!
How do I strengthen my front door?
Aside from making sure your door, frame and locks are in good condition, it’s worth taking a look at these other things you can do:
Screws: Typically, front doors come with ½-inch screws that go into the door opener and hinges with longer screws. Using 3 ½ inch screws will add to the strength of your door by attaching your door to the wall studs.
Strike Plate: If you have a standard small strike plate fitted to your door frame, upgrade to an elongated strike plate. This allows you to use more screws which will help prevent the door from being kicked in as the force is distributed over a larger area.
Door Reinforcement Kit: These handy door reinforcement kits contain everything you need to reinforce the door frame and door edge, including an extra long striker plate and extra long screws as mentioned above. This is the most expensive option, but also the most comprehensive for securing your door.
Types of front door locks
Locks are often subjected to multiple break-in techniques used by burglars, including picking, poking, drilling and snapping, combined with daily use of a lock. It’s also important that your locks meet UK standards to ensure your home is as secure as possible! Here are 5 signs you need to replace your lock.
Yale type night latch locks
A night latch, better known as a Yale lock, is most commonly found on wooden doors and consists of two parts; the backset, which is attached to the inside of the door and the rim cylinder, which is attached to the outside of the door. Night locks lock automatically when the door is closed and a key is required to get back into the house after the door is closed. There are a number of night locks on the market ranging from £35 to £75+ depending on the security type, brand and model of lock. Check out the variety of night locks below.
Standard night lock
Standard night locks are key operated to gain access from the outside and contain a small handle on the inside that is pulled down to release the door, sometimes also fitted with a small deadbolt that locks the deadbolt both when closed as well as locked in the open state. Standard night locks do not meet insurers’ requirements as they are not considered secure enough and therefore require a second lock such as a key lock. B. require a mortise lock that meets British standards.
Best Standard Night Latch Lock: Choose a Yale 89 when buying a standard night latch. Prices range from £25 to £30 for a Yale 80 Night Latch.
Deadlocking Night Latch
The only difference between a lockable night latch and a standard night latch is that you can turn the key in the lock from the outside to lock the inside handle. This is handy when there is nobody in the house, because once activated by turning the key a full turn in the opposite opening direction, the inside handle is locked and cannot be released until someone has unlocked the door from the outside.
A deadbolt night latch, like a standard night latch, is not solely approved to UK standards and also requires a secondary lock that meets those standards. The advantage of a latchable night latch over a standard latch is that if someone breaks into the door by smashing a window, they will not be able to reach in and turn the handle to release the door.
Best Deadlocking Night Latch: One of the best deadlocking night latches on the market is the ERA 1830. The ERA 1830 deadlocking night latch is priced at around £75.
Automatic locking at night
An auto-locking nighttime latch is the same as its sister, the locking nighttime latch, but does not require a key to lock the door. As soon as the door is closed, the safety lock is activated. These locks are mostly approved by insurance companies as long as they meet British standards BS3621 so only one lock is required.
Best Automatic Deadlocking Night Lock: The best automatic deadlocking night lock is Yale #1. These prices range from £60 to £80 for this night lock. Please note that these locks are less common.
Night bolt with double locking
A double locking night lock comes with two keys because you can lock the door from the outside like all other night lock variants, but this lock has a keyhole on the inside so you can lock and unlock the door either way. Double locking night locks are British Standard approved and meet insurance company requirements.
Best Double Lock Nightlock: Yale 89 is one of the best double lock nightlocks. These locks are priced between £25 and £30.
Important points:
Standard and deadbolt nightbolts require an additional mortise lock to conform to insurance companies and UK standards.
Automatic deadlocks meet the requirements, just a keyhole.
The double night lock is best as it requires a key to lock and unlock it from inside and outside.
mortise locks
There are two varieties of mortise locks; a bolt lock and a wing lock. A mortise lock consists of only two parts, a bolt and a keyhole for locking. Deadbolt locks are most commonly used on wooden doors in conjunction with a night latch. A wing lock consists of a bolt, a keyhole and a latch with a door handle.
5 handle mortise lock
A 5-lever mortise lock is fitted into the frame of a wooden door and can be locked from the inside and outside with a key. This lock must be approved to British Standards BS3621 to be used on its own or be supplemented with an approved night lock to be considered secure enough.
Best 5 Lever Mortise: The best 5 Lever Mortise is the ERA Fortress. Prices range from £15 to £25.
3 lever mortise lock
The 3 lever mortise lock is the same as the 5 lever mortise lock except that it is less secure as it contains fewer levers and therefore increases the risk of key duplication.
Best 3 Lever Mortise Lock: The Union Strongbolt is the best option for this type of lock. Prices range from £10 to £20.
Important points:
The 5 lever mortise lock is more secure than its 3 lever counterpart as there is less risk of key duplication.
cylinder locks
Cylinder locks are often used in conjunction with a mechanism and are most commonly found on PVC doors. There are a few variants of cylinder locks; a euro cylinder and a knob cylinder. Read our guide to changing a uPVC door lock cylinder here.
euro cylinder
The most common lock is a Euro cylinder fitted to a PVC or composite door. Euro cylinders can be locked from both sides of the door with a key. Euro cylinders without increased security, e.g. A latch lock, for example, is very easily picked by burglars so it is recommended that these types of locks be updated to meet UK standards.
Best Euro Cylinder: The Versa Euro is the best Euro Cylinder. You’ll pay around £10 for one of these.
knob cylinder
Knob cylinders use a key on the outside of the door and a knob on the inside. They are a good security solution as residents can lock and unlock their doors without a key. Knob cylinders are also great in an emergency as they are quick to open. If there is a fire in the apartment, you don’t have to worry and waste time trying to find the key to unlock the door.
Best Knob Cylinder: Vera Knauf is one of the best on the market for this type of lock. Prices are around £10.
Anti snap lock
Lock snapping is a common method used by burglars as it requires no special tools and is a frighteningly quick way to gain entry. The best way to combat this common problem is to install anti-snap locks. With a standard lock, a thief applies force that snaps the lock and exposes the mechanism, but with an anti-snap lock, there is a small indentation on the lock that then acts as the weakest point, allowing the lock to snap when force is applied locks into place at this weak point Leave the mechanism intact and out of sight to prevent burglars from gaining entry.
Best Anti-Snap Lock: Choose either the Yale 1* or the ABS 3* for your new anti-snap lock. They range from around £30-£40.
Important points:
Upgrade your standard euro locks to anti-snap locks.
Knob cylinders are great for quick emergency exits, but don’t fit near a window where burglars can easily gain access.
multipoint locking
Multipoint locks are most commonly installed in plastic or composite doors and work in conjunction with a cylinder lock. They are a long bar with 3, 4 or 5 locking points that fits into the door body which then snaps into the frame. The locking bolts are activated when the handle is lifted and the door is fully secured when the cylinder is locked with a key.
Best Multi-Point Locking System There are many great brands to choose from for your multi-point locking system including Lockmaster, ERA, Maco, Millenco, the list goes on. Multipoint locking system prices vary widely, but as a base you want to pay £150+.
Furniture for security doors
Another way to increase your front door security is to implement a few extras that are inexpensive and easy to install, but still have a major impact on securing your home should a burglar attempt to break in.
peephole
Most doors now come standard with a door viewer as these are a great addition to improve the security of your door. It allows residents to see who is knocking on their door without opening it and putting themselves at risk of potential intruders.
mailbox guard
These are like a hood for the inside of the mailbox and are used to prevent burglars from putting their arm or a tool through the mailbox to reach through the mailbox and turn the handle or to be able to reach for keys.
mailbox cage
Much like a mailbox guard, cages fit around the interior mailbox and collect the mail that comes through the door; Also great if you have dogs that like to get to the post office before you do! Mailbox cages also prevent arms or tools from crawling through to reach keys or the door handle.
Mailbox Homeguard
Again similar to above but a home guard is a fire retardant bag that fits around the mailbox and protects the house from things like firecrackers thrown through the mailbox and burglars trying to get to the door handle and keys.
door chain
A door chain attaches to the door frame and the door itself and comes in a variety of styles. These act as an extra lock, allowing you to partially open the door to interact with the stranger at the door without putting yourself and your home at risk.
door buckle
A high security door handle is typically twice the thickness of a regular door handle and protects the door from picking the handle and lock, techniques used by burglars to break into a home. A high security door handle must be combined with a high security lock.
Sash jammer
Wing clamps are a great way to upgrade your door security on a budget; They are around £10+ depending on size, make and model and will prevent the door from being opened if the lock has been picked. They are available as lockable and non-lockable and are typically used on plastic doors.
hinge pin
Intruders may try to unhinge a PVC door to gain access to a property. Hinge bolts, which are relatively cheap (£5+ depending on size, make and model) and easy to install, prevent a door from being lifted off its hinges unless the door is open. Hinge bolts are small round tabs that are drilled into the door frame and snap into strike plates in the frame when the door is closed.
strike plates
Strike plates for latches and other door components are attached to the frames to secure the door and hold it in place to prevent it from swinging open. You can upgrade your strike plates to improve the security of your home by installing a security strike plate that is larger and thicker than a traditional strike plate. Additionally, one of the most important techniques you can employ to improve the security of a striker plate is by using longer bolts and more of them. The advantage of using longer screws is that they are less likely to slip out in an attack, and the more means that have to be used, the harder a burglar has to work to try and open the door.
London & Birmingham bar
Crafted for wooden door frames are weak when attacked, as when violent they often splinter and splinter, allowing the intruder to kick in the door. A London bar is highly recommended to reinforce and strengthen the door frame to prevent this as it is a solid steel bar that sits over the existing locks. A Birmingham bar is very similar to the London bar, but the Birmingham bar works on interior surfaces and doors that open inwards.
lock guards
Lockguards are used to reinforce and strengthen a wooden door around the existing mortise lock. These are pretty easy to install and start at around £20+.
safety bolt
A security latch is attached to the edge of the door and can be locked from the inside or outside with a wedge key, adding another layer of security to your door.
patio door security
Patio doors are often overlooked when it comes to door security and many burglars take advantage of this knowledge. Some of the security extras above apply to patio doors and below are a few more tips on how to secure your patio door.
Patio Security Bar
Patio security bars are an additional security bar that fits over the door handles and not only helps to keep the mechanism in place even if the locks have been picked. Patio security gates are also a great visual deterrent that can deter the intruder from the start.
Strengthen the glass
All patio doors should be fitted with double glazing, not only to protect against the windows being smashed, but also to keep heating costs down. If the door has full length glass it is recommended to upgrade to tempered glass as this will only crack in small circular cracks when broken rather than shattering.
Door security tips
key
Don’t leave your keys in obvious places like under a flower pot or doormat outside your home. If you want to leave a spare key somewhere, we recommend leaving one with a trusted neighbor. Remember not to leave your keys within sight of windows or within reach of the mailbox.
Lock your doors
Always remember to lock your door at night and when leaving the property. Lock your doors even if you’re home during the day, as some insurance companies still won’t pay if your home is broken into with the doors unlocked. If you have a cylinder lock with multi-point locking, lifting the handle is not enough to exit your property. Lift the handle to activate the locking points and remember to lock the door with the key to ensure security.
Choose a door with no windows
Doors with windows can pose a security risk if the windows are within range of the lock. Choosing a door without a window completely eliminates the risk of a burglar breaking the window and grabbing your locks. If you like the aesthetics and light a window brings in the door, make sure it’s reinforced glass and as far away from the lock as possible.
sliding doors
Sliding doors are becoming increasingly popular, but all that glass poses a threat to your security. Make sure the glass is reinforced and consider adding blinds or curtains to prevent burglars from looking inside.
Find a locksmith
You may be able to improve your door security yourself by adding some of the additional security measures above. However, to ensure your home security is as good as it can be and is fitted correctly so as not to weaken your door, it is best to seek out a professional locksmith. Our fully trained and accredited locksmiths at Keytek® offer homeowners and residents a free home security check with every call. If you book us, just ask our locksmith for more security advice and we’ll be happy to help.
Even more protection
If you are concerned about home security and want to implement even more security measures, in addition to the information above, we recommend that you check out our other home security guides for more information. We’ve highlighted a few at the top of this page!
Frequently asked Questions:
Related searches to j tool for thumb turn locks
Information related to the topic j tool for thumb turn locks
Here are the search results of the thread j tool for thumb turn locks from Bing. You can read more if you want.
You have just come across an article on the topic j tool for thumb turn locks. If you found this article useful, please share it. Thank you very much.
