Are you looking for an answer to the topic “how to remove links from a vostok bracelet“? We answer all your questions at the website Chewathai27.com/ppa in category: Aodaithanhmai.com.vn/ppa/blog. You will find the answer right below.
Table of Contents
How do you remove links from a watch bracelet?
Place your watch into the holder or foam piece so that you can see the top of the pin. Use the pushpin tool and the hammer to gently tap the pin until it emerges from the other side. Use your fingers or a small set of pliers to remove the pin gently. Repeat until you’ve removed all your planned links.
How often should I wind a Vostok?
But if you do not wear your watch more than 24 hours it’s necessary to wind it up. Unscrew the winding head counter clockwise from the case – position 2 and start winding clockwise by turning winding head on 25-30 revolutions, slightly delaying the head from the case.
Vostok Amphibia 710486 Review: A Deep Dive • The Slender Wrist
winding mechanism.
If you wear the watch every day, you don’t have to wind it. The running of the watch is ensured by a special automatic self-winding mechanism that makes your watch run thanks to the movement of your hand.
But if you don’t wear your watch for more than 24 hours, it is necessary to wind it.
Unscrew the winding head counter-clockwise from the body – position 2 and start winding clockwise by turning the winding head 25-30 turns and slightly retarding the head from the body.
After the winding is finished, it is necessary to stop the winding head to avoid breaking the mechanism.
The best way to wind an automatic watch is to wear it on your hand.
Do not immerse the watch in water unless the winding head is in position 1. (Position 1 – the winding head is fully screwed onto the housing).
Setting the time.
Place the winding head in position 3 and pull until it clicks. Turning the winding head counterclockwise sets the correct time. After setting the time, screw the winding head in position 1 onto the case.
Updating a calendar.
Set the winding head to position 3. Set the correct date by turning the watch head clockwise. Then bring the winding head to position 1.
The accelerated update of a calendar.
Set winding head to position 3. Move the winding head counterclockwise from number “12” to number “8” and then set the correct date from number “8” to number “12”. Then bring the winding head to position 1.
Instructions for caring for the watch:
– watches should be protected from shocks, influence of chemical products and influence of magnetic fields;
– To avoid fogging under glass, make sure that the winding head is screwed tight;
– To avoid dust and dirt getting into the mechanism, it is forbidden to open the back cover of the case.
How do I adjust my watch bracelet?
Pinch the band evenly from the clasp until it is the proper size. Make sure you have an equal number of links on either side of the clasp that need to be removed. This will make sure the watch itself stays centered on the wrist band. Write down the number of links that need to be removed from either side of the clasp.
Vostok Amphibia 710486 Review: A Deep Dive • The Slender Wrist
Article overview
X
To adjust your watch strap, first put your watch on and pinch the links around the clasp to count how many links you need to remove. Then remove your watch and lay it flat. Locate the small opening on the side of the first link you want to remove. Push a pin into the opening of this link until the pin holding the band in place is sticking out the other side. You may need to tap the back of the push pin with a rubber mallet or small mallet. Using pliers, grasp the protruding portion of the pin and pull it out of the link to unlock that side of the band. Then repeat the process the next time you open it to fully unlock the link from the band. Once you’ve removed enough links, slide the two open links together. Slide one of the pins you removed into the hole above the clasp where the two links meet. Push it back into place or tap the back with a rubber mallet to finish adjusting your watch band. Scroll down for tips on how to put the clasp back on your watch band!
Sizing a Vostok Amphibia SE
See some more details on the topic how to remove links from a vostok bracelet here:
Got my first Vostok Amphibia. But need help to take out some …
I remember using my cheap link removal tool to push it out about 1/2″ then a pair of needle nose pliers to pull it out from the bracelet. I then …
Source: www.watchuseek.com
Date Published: 1/20/2022
View: 5001
Remove links from vostok watch strap – Fixya
Simply put pin into the hole as deep as you can with your fingers, put the toothbrush handle on split pin end and hit handle, not the pin. Make sure that pin …
Source: www.fixya.com
Date Published: 3/15/2022
View: 3129
[Question] Vostok 960xxx Amphibia Link Removal issue – Reddit
They are pins, what you are seeing is the split end of the pin. Knock them out from the direction of the sol end toward the direction of …
Source: www.reddit.com
Date Published: 6/26/2022
View: 2532
Bought a Vostok Amphibian – Russian & Chinese Watches
It arrived yesterday and after some fdling (I can’t figure out how to remove links from the supplied bracelet) I swapped it on to a spare …
Source: thewatchforum.co.uk
Date Published: 8/28/2021
View: 1708
Vostok Amphibia 710486 Review: A Deep Dive
I had to remove about four rows in total, cutting each link indivually. Vostok Amphibia bracelet links. The clasp is a double push button …
Source: theslenderwrist.com
Date Published: 3/18/2021
View: 2732
Watch Care – Vostok Watch with free worldwide shipping
Your watch strap will last 4-5 times longer if you use a deployant clasp to take … Invest in a Link Pin Remover or Spring Bar tool, if You would like to …
Source: vostok.watch
Date Published: 7/25/2022
View: 9841
Vostok Wristwatch Straps for sale – eBay
Vostok Stainless Steel 18mm Bracelet With Female End Links. £12.99. Click & Collect … Vostok Russian Watch Bracelet New Design – Stainless Steel (22mm).
Source: www.ebay.co.uk
Date Published: 11/28/2021
View: 1357
Vostok Watch Extra bracelet link – Meranom
Vostok Watch Extra bracelet link. Price: $6.90. Add to Cart. Add to Wish List. Add to Compare. In Stock Bracelets Product Code: звено браслета …
Source: meranom.com
Date Published: 4/24/2022
View: 321
How to Remove Watch Links in 5 Simple Steps for a Better Fit
Finding a new watch that suits you perfectly can be a bit tricky. Watches are usually only sold in a few standard sizes, which can either be too big or too small for your wrist. Most metal watches allow you to adjust the fit by removing or adding links to achieve the perfect fit. If you don’t have time to go to the jeweler or want to save a few extra bucks, you can change the fit of your watch yourself. It’s a simple process.
While it may sound like a difficult process, here at The Manual we’ve put together a simple five-step process to get your watch the perfect fit in no time. Below is a guide on how to remove watch links for a better fit.
Related guides
Step 1: Measure
Metal watches are intended for individualization. Measuring your wrist and the watch itself is the first part to making sure the fit is just right. You can do this in a number of ways.
Use the watch yourself
Put your watch on your wrist. Gather the links until it is what you want and count how many are left over. Plan to remove the links evenly from both sides of the watch, leaving your clasp in the middle.
Use a fabric tape measure
Lay your watch flat on the table. Measure your wrist with the cloth tape measure. Place your watch in the center of your measurement and plan to remove the links on either side to ensure an even clasp.
Now you can proceed to the next part.
Step 2: Gather Your Tools
You work with very small pieces. One lost screw and you go to the jeweler.
Find a flat surface and clear it of clutter. Make sure you have a good light source. We recommend working with a tray to keep small pieces at bay. Place a small cloth in the compartment to reduce noise and ensure nothing gets scratched. You will need a set of jeweler’s tools. These sets are not difficult to find. You will also need a watch holder or a piece of foam to help hold your watch in place.
Your workspace is ready. It’s time to customize your watch.
Step 3: Remove shortcuts
Now it’s time to tackle those connections. The most important thing to remember is not to remove all the links from one side or your watch clasp will look weird.
Turn your watch over and look for the little arrow marks showing where the pins come out. Place your watch in the holder or foam piece so you can see the tip of the stylus. Use the thumbtack tool and hammer to gently tap the pin until it comes out the other side. Use your fingers or small pliers to gently remove the pin. Repeat this process until you have removed all scheduled links.
Make sure you keep an eye out for other pens that might fall out while you work. Keep up with the pens themselves as you will need some for the next step.
Step 4: Reconnect the links with the clasp
Now that you’ve removed extra links, it’s time to finish your watch.
Find the pins you need and turn your watch over in the holder. Make sure the arrows are pointing up. Put the pin back into the hole and gently tap until it’s fully inserted. Repeat on the other side. Tap on slipped ferrules. Check your watch. Try it on to make sure it fits and look for anything that seems out of place.
Step 5: Enjoy your watch
There are no further steps to be taken here. Your watch fits like it was made for you, and now you can wear it. No further steps are required other than saving your links and pins for future adjustments.
frequently asked Questions
Let’s answer some of your burning questions.
How do you take links out of a watch without the tool? — So you have no jeweler’s tools and no time to wait. If you have a pin, you can mimic the tools. Use the pin and a slightly stronger tool to tap the pin.
— So you have no jeweler’s tools and no time to wait. If you have a pin, you can mimic the tools. Use the pin and a slightly stronger tool to tap the pin. Why aren’t my watch links showing? — If you’ve never changed links or your watch is older, the pins can be a bit stubborn. The best option is a complete jeweler’s set with a watch holder. You have more leverage to knock out those stubborn pins.
— If you’ve never changed links or your watch is older, the pins can be a bit stubborn. The best option is a complete jeweler’s set with a watch holder. You have more leverage to knock out those stubborn pins. What if there are no arrows? — If you cannot see any arrows on the watch, locate the stitching in the needle. Flip this side up and you should be able to tap the pins out with relative ease.
— If you cannot see any arrows on the watch, locate the stitching in the needle. Flip this side up and you should be able to tap the pins out with relative ease. Can I remove links from my Rolex or Fossil watch? — Each watch with links can be customized. You can even change the links on watches like Michael Kors’ ceramic line. Whether the watch is expensive or something you found on sale, you should be able to pull out the links you need.
— Each watch with links can be customized. You can even change the links on watches like Michael Kors’ ceramic line. Whether the watch is expensive or something you found on sale, you should be able to pull out the links you need. How many links can you remove from a clock? — Some high-end watches come with up to 12 extra links, giving you plenty of room to customize your fit. If you have a watch with arrows, the links are fixed without an arrow mark and cannot be removed. You should have plenty of links to customize your fit.
— Some high-end watches come with up to 12 extra links, giving you plenty of room to customize your fit. If you have a watch with arrows, the links are fixed without an arrow mark and cannot be removed. You should have plenty of links to customize your fit. What is the correct fit for a watch? — Normally, your watch should have enough room to rotate freely on your wrist when you move it, but not shift when you move your hand up or down. However, the right fit is entirely up to you and your comfort level.
Customize your watch
You don’t have to take your watch to the jeweler. You can manage the links yourself, so you can customize your watch from the comfort of your own home. All you need is a good set of jewelry tools and a well-lit area. All your watches fit exactly the way you need them.
Follow the steps we have outlined and you will be a pro at customizing your watches. Save the links where you can find them and all that’s left is to enjoy them.
Editor’s Recommendations
[Question] Vostok 960xxx Amphibia Link Removal issue : vostok
Press J to jump to feed. Press the question mark to learn the rest of the keyboard shortcuts
Search within r/vostok r/vostok r/vostok
Vostok Amphibia 710486 Review: A Deep Dive • The Slender Wrist
In this post we share our thoughts on the Vostok Amphibia 710486. Read on for the full review.
Some dismiss Vostok watches as cheap toys not worth taking seriously. Others claim that a true watch enthusiast’s collection is not complete without at least one Vostok.
However you feel, one thing is clear: this Russian brand has garnered a loyal cult following. Today we’re looking at one of their flagship Amphibia watches, a one-of-a-kind dive watch with an equally cool backstory.
History of Vostok
A Vostok review would not be complete without a look at the company’s history. The company was founded in 1942 as a makeshift factory in Chistopol to support the war effort. After the Second World War, production was shifted to clocks.
The name “Vostok”, which translates to “East”, was later adopted to honor the achievement of cosmonaut and national hero Yuri Gagarin. In 1961, Gagarin became the first person to orbit the earth in a spacecraft of the same name.
The Vostok factory’s high standards caught the attention of the Ministry of Defense and soon became the military’s official supplier. The Komandirskie was created in 1965 as a standard soldier’s watch.
In 1967, Mikhail Novikov and Vera Belova, chief designers at the Chistopol factory, were tasked with developing the first diving watch for the Soviet military.
It had to work reliably at 200 meters. While Swiss watchmakers had already achieved this, their designs were protected by patents and the Russian machines of the time were unable to replicate them.
Consequently, Novikov and Belova had to develop their own waterproofing system from scratch. Thus the Amphibia was born.
Vostok Amphibia 710486 Overview
Here are all the details you need to know about the Amphibia 710486…
Packaging
I thought I’d briefly mention the packaging as I felt the presentation was a new part of the experience with this watch.
The watch comes in a monolithic black plastic box that flips open to reveal the watch protected by a single sheet of bubble wrap. By no means luxurious, it has its own charm. Also included are the instruction booklets, one in Russian and one in English.
I ordered mine from Soviet.Market and it took a little over three weeks to arrive from Moscow. As the sticker on the box suggests, this reference is called 710486. 710 refers to the case, and 486 likely indicates the design and color of the dial.
case
There are several Vostok case types, each with its own three-letter designation. Although they differ aesthetically, they are all about the same in terms of finish and functionality.
The 710 here is a 70’s inspired cushion cover made up of wide beveled edges. The right side of the case is slightly recessed to protect the crown. Vostok uses stainless steel for the Amphibia line, but it’s not clear what grade.
The finish is fully polished apart from some vertical brushing along the inner edges between the lugs (a stain you’ll never see) and the case back, which is radially brushed.
Case dimensions:
While the case measures 42mm, it tends to wear smaller due to the short lugs. For reference, my wrist is 6.5 inches long.
42mm wide
44.6 mm (incl. crown)
45.4mm lug tip to lug tip
22 mm lug width
15.2mm thick (including crystal)
Weight: 65 g / 2.3 oz (watch case) – 125 g / 4.4 oz on strap.
I find the watch’s size and feel quite similar to the Seiko SKX007 (or the Seiko 5 SRPD line). Speaking of Seiko, the lug holes are wide enough to fit Seiko “Fat Boy” spring bars if you have any.
However, they do not fit through the shark mesh strap. Too bad. I recommend swapping out the stock spring bars on the watch as they are a little flimsy and flimsy.
crystal
While scratch-resistant sapphire crystal has become the standard for modern dive watches, the Amphibia uses plexiglass specifically for its physical properties.
The crystal is 3mm thick and carefully machined to expand as you dive. When external pressure is applied to the convex dome, it flattens and forms a tighter seal with the case. The deeper you dive, the more waterproof the watch theoretically becomes.
This idea is shared by the Super Compressor-style watches of the ’60s. In comparison, sapphire or mineral crystal cannot bend and will shatter under sufficient pressure.
Aesthetically, it adds warmth to the dial and gives it a milky white appearance. The domed shape naturally distorts the edges of the dial when viewed from low angles, reflecting light along its edges like a bubble.
Some may be reluctant to buy a watch with a plastic crystal as it is notorious for getting scratches. In two weeks on the wrist I’ve earned a few dents on my rim. But don’t worry, scratches can be polished out just as easily as they were created with a Tube Polywatch.
caseback
The case back is another unconventional approach to watch design. Novikov and Belova found that the caseback seals of their Swiss competitors could be improved.
The rubber O-ring, essential to water resistance, is subjected to severe stress when a watch’s caseback is screwed down. In short, it bears two forces: compressive stress from squeezing and shear distortion from friction with the case back.
For this reason, a watch must be pressure tested every time the case back is opened, or the O-ring must be completely replaced. The solution to this problem was to eliminate the shear force that would eventually affect the rubber seal.
The system consists of three parts: the case back, a threaded ring, and a large flat rubber gasket. The case back sits on the watch back with two notches that prevent it from turning.
The threaded ring is then tightened, which forces the case base and gasket together without friction, much like the lid of a mason jar. Because the gasket is also wider, it allows for a much stronger seal.
Choose
This dial and handset is common on many Vostok watches. The handset is a black arrow and pencil, plus a red seconds lollipop for a pop of color.
The easy-to-read and streamlined dial consists of Arabic numerals at 12, 3, 6, and 9 in a rounded, vintage-style font. Diamonds mark the adjacent hours, and a minute track borders the dial.
There are eleven lume pips applied to each hour of the minute track, except at the 6 o’clock position where space has been left for “Made in Russia” in Cyrillic.
The coolest aspect of the dial is probably the stylized “Amphibia” logo and accompanying Russian text. Above the 6 is the depth rating and “Autowinding” in Russian.
lume
I was pleasantly surprised to see that the lume applied to all three hands and the dial glowed brightly when charged.
While it doesn’t last particularly long, it’s enough to tell the time late at night, which is fine for my needs.
Crown
The processing of the crown is as simple as possible. It is large with deep grooves and cuts off abruptly to a flat edge. However, it gets interesting when you unscrew the crown: it wobbles.
Don’t worry, it’s not broken. This is another unconventional design choice.
When you unscrew the crown, the crown stem detaches from the movement to prevent damage from accidental impacts. However, this makes using the crown work a bit clumsy.
It’s easy to accidentally catch the threads and screw the crown back in. The instructions even warn against it. To avoid this, pull the crown slightly when winding or setting the time.
movement
Vostok 2415
31 jewels
19,800VPH
Manual winding, not hackable
Power reserve: 31 hours
The movement is Vostok’s in-house caliber. This is a real workhorse, and it’s the most widely used Vostok movement, along with its date counterpart, the 2416B. It has been in production since the 70’s and has an impressive 10 year service interval.
The compromise? It’s not very accurate. With a rating of -20 to +60 seconds per day, you may need to reset these frequently. You can take it to a watchmaker to have it regulated, or you can try it yourself if you’re the smart type. Because it’s such a sturdy, affordable watch, many go down this route.
Funnily enough, my move worked remarkably well out of the box. Over a 7-day period, it lost 8.7 seconds, which is an average loss of 1.3 seconds per day. I can’t expect it to perform consistently over time and your mileage may vary.
bezel
No clicking on these, Vostok bezels are friction-locked and bi-directional. “Coin edge” describes this one quite literally. The bezel is about as thin as a US dime, and the edge finishing is comparable too. As a result, it’s not very grippy and digs into your fingers when turning.
There is quite a bit of resistance when turning and sandyness in places. In this case, tightness isn’t necessarily a bad thing. It prevents the bezel from accidentally rotating when you bump into the watch.
The bezel is chromed brass, and as you’d expect, the glossy finish is a swipe magnet. You will often wipe fingerprints. I also compulsively fiddle with the bezel to make sure it’s perfectly aligned at 12.
The application of paint in the deepened numerals is spotted in some places, but not bad. However, since the bezel doesn’t lack a lumen, it’s useless in the dark. Unfortunately, for all the thoughtful engineering that has gone into the watch, the bezel seems like an afterthought.
Luckily, there are a plethora of aftermarket bezels and inserts on the market that you can take to modify your watch.
The bracelet
The consensus on Vostok bracelets is murky. Most of them are a hair-raising nightmare and it is recommended that you throw them out and replace them immediately.
The exception: Vostok’s mesh bracelets. The shark mesh bracelet fits the hand very well. It is smooth and free from sharp edges. Aesthetically, the bracelet’s lustrous woven links complement the polished case and steel bezel.
One thing to note: With traditional shark mesh fashion, the only way to make the bracelet smaller is to permanently cut off the links. It’s not difficult if you have the right tools at your disposal, but it’s a tedious process. I had to remove about four rows in total and cut each link individually.
The closure is a double snap button with flip lock. This type of clasp is common on microbrand watches and aftermarket straps of varying quality.
Some are milled but this one uses folded steel for the hinge. While it feels a little cheap, I can’t argue with the functionality. It does its job well and it’s nice and unobtrusive.
There’s also a lauded Milanese net for around $15, but it doesn’t come pre-packaged with watches and must be purchased separately. If mesh isn’t your thing, there’s a rubber strap and plenty of NATO/Zulu strap options.
Conclusion
Initially I wasn’t quite sure how I would gel with this watch. However, after a few days of wearing it, I really liked it. It’s a fun, quirky watch. It has a very retro appeal, like something straight out of the space age. In addition, it is very affordable.
You will hardly find another automatic watch for less than $100, let alone a 200 meter diver.
In this price range, you don’t have to worry about versatility. You can buy one with a crazy colorful dial without the hefty price tag of a luxury watch. There are literally dozens of case, face and handset combinations to choose from.
The website I ordered my watch from, Soviet.Market, has a “configurator” page where you can select individual parts to build your own custom Vostok watch. There are also plenty of resources online if you are interested in modding.
Modstok.com is a great place to start. It contains a list of retailers in different countries for watches and aftermarket parts.
Considering the era in which they were designed, I believe these watches are a feat of engineering and design worthy of respect. The caseback and gasket system is super cool and I’m surprised more watchmakers haven’t adopted it.
Yes, the watch’s finishing is somewhat rudimentary, but it underscores the stoic principles behind the Russian design philosophy: robust, purposeful and economical.
If you’re interested in trying an automatic watch for the first time, this is a good place to start. And are you saying that’s why you got a taste for automatic watches? The quality in terms of materials, workmanship and accuracy only increases from here.
Or maybe you’ll go a different route and become a budding Vostok collector. They say it’s hard to stop at a Vostok, and I’m beginning to understand what they mean.
Related searches to how to remove links from a vostok bracelet
Information related to the topic how to remove links from a vostok bracelet
Here are the search results of the thread how to remove links from a vostok bracelet from Bing. You can read more if you want.
You have just come across an article on the topic how to remove links from a vostok bracelet. If you found this article useful, please share it. Thank you very much.
