Knee Pads For Cleaners? The 139 Latest Answer

Every time a soldier enters the Central Issue Facility, they’re given a bunch of gear – some are necessary, like more uniforms, and some are popular, like the Woobie.

But there’s a lot of gear that just never gets touched until the next time they come back to clear CIF. It’s probably still in the same packaging it came in when flipped.

This crap just sits in a holdall that slides in the back of the closet.

And yet it gets rejected because it hasn’t been cleaned – even if it’s still sealed in the damn bag! (US Army photo by Sgt. Joseph Moore)

8. Canteens

Ask a civilian to name a piece of military equipment and they will say canteen.

It used to be a life saver – there’s no doubt about that. But today it’s only seen in training environments or by that one “overly fast” guy in every session. The rest of us use bottled water or camelbacks while deployed.

Because rubber bottles are disgusting.

However, the canteen cup is still very useful. It makes a great coffee mug/aftershave container/holder for smaller crap.

7. Elbow Pads

Knee pads help protect a delicate and fragile part of your body that really needs to take a beating (and will ultimately be destroyed after years of jerk-marching or a static jump anyway). But until then, knee pads protect against bruises and cuts and, above all, ensure a more comfortable shooting position.

Not the elbow pads. They just get in the way.

A common joke is that you can always tell who the POGs are, either by how they react to the indirect fire (IDF) siren or if they actually believe other soldiers are actually carrying these useless pieces of crap that just slide down or restrict movement.

Makes even less sense that they have the buckles and that little sleeve thing. (Photo by Sgt. 1st Class Clinton Wood)

6. Most rain gear

Other units may allow their Joes to carry most wet-weather gear, others only allow even the salty sergeant major to have enough of it in the worst of conditions. Shy from the Gortex top, nobody touches their pants or boots in wet weather.

Even the poncho is used only half as a makeshift shelter during field exercises.

Or as a makeshift raft at ranger competitions. (US Army photo by Sgt. Austin Berner)

5. MOP boots

Speaking of useless boots, the pair used interchangeably throughout the layout is just as useless.

In a real chemical gas attack, we put on our gas mask first. Followed by everything else in order of what matters most to survival. The boots? nope They take way too long to put on in an emergency when you have bigger things to attend to. Taking the time to properly lace up your MOP boots definitely falls off the to-do list.

By that time you’ll probably be dead. (U.S. Air National Guard photo by Tech. Sgt. Courtney Enos)

4. Glove inserts

It’s nice when troops in formation are allowed to wear gloves. The problem is that the standard edition leather shells also need liners.

The glove inserts are just a thin piece of wool that doesn’t stand up to the cold. Wind slices right through them and God help you if they ever get wet.

There’s a reason everyone buys other pairs that are as close to regulation as possible. (Image via Olive Drab)

3. Carrying Vest (LBV)

The purpose behind the LBV makes no sense. It contains all the gear one would need at range or at range, but doesn’t offer the protection of a true ballistic vest.

So why not wear the actual ballistic vest? LBVs do nothing but dig into your shoulder.

Serious. The only non-photoshopped image of a soldier actually wearing one (and not a mannequin or a tactical civilian) that I could find is from the Army’s official video of how to set one up. (screen grab via YouTube)

2. Surefire ACH light

Everyone wants to go high speed and rock the high speed gear… until it’s time to rock the high speed gear.

At first glance, these look chic as hell. It would be helpful to have a hands-free light to show you the way.

But no. Try editing these with gloves on or switch to the red light without going through all the other features first.

Or even try to survive a woodland field workout without crashing into anything and lose that $200 junk waste. Good luck finding the right batteries for those things too.

Too complicated. It’s not worth it.

I think the army stopped issuing these, but they still buy smooth-sleeved cherries from the PX. (Image via Weapons List)

1. Skivvies issued by the BVD Army

Anyone who says they didn’t immediately dump all pairs of these to Basic so they can “stay within regulations” is either way too “hooah” for their current rank or a fucking filthy liar.

The Skivvies are like sandpaper that rubs against your “sensitive areas” when you take a step. No one will ever check to see if their subordinate is wearing the right underwear or even taking care of them (and if they are, then there’s a much bigger problem at hand). Why not just wear what you bought at American Eagle or Target?

Knee pads should fit snugly without restricting circulation. The pads should stay in place even when the knee is bent, moved, or straight. And pads come in different lengths with different properties. Some cover more than just the knee and others offer patellar tendon, ACL or LCL protection. Find the type of pad that suits your needs and try on different sizes before you buy.

When it comes to volleyball knee pads, it doesn’t matter if you’re an avid, experienced volleyball player or someone just starting out, protecting your knees should be one of your top priorities. You never know when you’re going to dive and accidentally pull yourself out of the water! Accidents happen and things don’t always go as planned. If you want to still be playing at 60, you now need to be proactive and take care of your body, and it all starts with wearing the right protective gear at every game, such as protective gear. B. High quality volleyball knee pads.

There was a debate among some volleyball players; to wear or not to wear volleyball knee pads; and while the defense against not wearing knee pads is strong, there are ways around these ailments and protecting your body should always come first. Many argue that wearing knee pads is rather debilitating – they can chafe skin, move, smell, look silly and cause a player to develop bad habits. However, with the right coaching, bad habits can be broken; Knee pads that fit properly shouldn’t chafe or move, new technology has helped fight odor (and the occasional wash doesn’t hurt either), and now there are options when it comes to choosing the perfect pair for you any individual preference. There is no right answer to the question “What is the best type of knee pad?” All in all, it comes down to what your personal preferences are and how you feel most comfortable.

Years ago there wasn’t much choice when it came to volleyball knee pads as bubble style knee pads used to be the only type of volleyball knee pads available. Today there are different types of volleyball knee pads to choose from. Often considered a traditional style, bubble style knee pads consist of a large pad that sits directly on top of your kneecap at the front of the knee. Bubble style knee pads are very thick hence the name, hence they offer a lot of protection if you fall straight onto your knees. However, many players don’t like to carry these pads because they are so big and bulky and also smelly! Currently, these pads are not produced as much, so they are not as readily available as they used to be. Many find that the amount of cushioning makes these pads more effective for youth and beginner players. The downsides to these pads are that they’re more prone to odor, many feel they’re too bulky, and they may not move well with you. However, once a player becomes more comfortable with the game, many tend to wear the knee pads in a flat style.

Flat knee pads were first introduced by Mizuno in the mid ’90s, the MZ-J1, and they’ve grown in popularity ever since. Currently, most of the volleyball knee pads made today are flat style. These pads have gained status due to their balanced protection, mobility while playing and because many didn’t find these pads obnoxious! While these pads don’t offer the same level of protection as the Bubble Knee Pads, they offer enough for players who don’t have an excuse to hit the ground or who aren’t entirely new to the sport. These pads allow for more movement and are much lighter, less smelly and bulkier than the bubble styles. Many also offer side protection due to their wraparound style, which provides some protection to the sides of the knees. This can come in handy when you crash into another player as you never know how you’re going to fall!

Today there are many different styles to choose from within the flat knee pad category that allow for different personal preferences in terms of protection, comfort and freedom of movement. This takes into account the differences in player preferences, playing styles and personal needs, giving you much more choice when shopping for the perfect knee pad. There are currently pads that offer the best of both worlds. Pads designed for players who need a lightweight, low profile knee pad but also need excellent protection. Hybrid knee pads like the Rox Volleyball Hybrid Knee Pads offer the perfect balance of mobility and protection through the use of solid gel technology.

A good rule of thumb when trying on knee pads is that they should fit the shape of your legs and not be too loose. Knee pads should fit snugly, but not too tight! According to the National Institutes of Health, volleyball players are more prone to knee injuries than other parts of the body, so you should invest in a good pair of protective pads. No matter what position you play, it’s always important to protect yourself from wear and tear. Remember, before you get to work, protect yourself and your knees with a good pair of volleyball knee pads from 1st Place Volleyball!

Some work areas are so physical that they pose a high risk of physical harm. For example, if you normally work on your knees for long periods of time, you could damage them. It would be best if you are aware that knee treatment such as B. a corrective surgery, can cost you thousands of euros.

Luckily, you can avoid all of this by simply investing in Snickers knee pads. Let’s take a closer look at work knee pads and see how they can benefit you.

Why wear knee pads?

According to statistics, 60 percent of knee injuries result from knee wear. One of the most effective ways to prevent this is by using knee pads. Here are some of the benefits of knee pads:

Protection – While the patella protects your knee joint, the patella itself is prone to fracture. A good knee pad can help minimize impact on your knee and prevent patellar fractures. A knee pad also protects you from being penetrated by sharp objects such as nails. Some knee pads are also designed to minimize the impact of a hard floor, which can seriously damage your knees over time.

SAVE MONEY – Knee pads can help you save a lot of money in the long run. The money you spend on knee pads is very small compared to what you would spend on treatment in the event of a knee injury.

CONFIDENCE AT WORK – When you have S nickers knee pads, you don’t have to worry about damaging your knees when you have to kneel on hard ground for a long time. This helps increase your efficiency.

Knee pads are versatile – you don’t need to wear knee pads just for work. You can also use them in various contact sports like soccer and basketball, which can put a lot of pressure on your knees. These pads can also help minimize damage from hard projectiles in sports.

Another great benefit of wearing knee pads is that they can protect you from osteoarthritis.

How can you get osteoarthritis?

Osteoarthritis, commonly referred to as degenerative arthritis, involves the breakdown of cartilage in the joints. While it can affect any joint in the body, it primarily affects the weight-bearing joints of the spine, hips, and knees.

This condition causes the cartilage in a joint to become stiff. As a result, the cartilage becomes less elastic and more prone to damage. Over time, the cartilage can wear out and lose its ability to absorb shock. This can stretch tendons and ligaments, which can be very painful.

If the condition is not controlled, the bones can start rubbing against each other. The fact that injured joints are more prone to osteoarthritis can increase your risk if you engage in activities that damage the joints.

Therefore, it is advisable to use protective equipment such as knee pads during activities such as plumbing, tiling, floor laying, landscaping, roofing, contact sports, etc.

How Can Knee Pads Help You?

Knee pads protect against impact and provide cushioning when kneeling. A good knee pad should stay firmly in place to ensure effective knee protection. This is where Snickers workwear comes in.

Snickers Workwear is known for making advanced industrial workwear that offers the ultimate in protection and functionality on the job. At Active Workwear you will find a wide range of Snickers Workwear products, including Snickers Knee Pads.

Read the next article: Snickers Climate Control Workwear

Enter the characters you see below

Sorry, we just need to make sure you’re not a robot. For best results please make sure your browser accepts cookies.

When it comes to home improvement projects, tiling is one of the most tedious. As well as mixing heavy bags of mortar and grout, tiling means working countless hours off your knees on a hard surface.

A good set of knee pads is a requirement for any floor tile project. Knee pads consist of thick gel and foam padding inserts that cushion the knees and are covered by a rigid outer cap that provides extra support while protecting against debris lying around on the job site. Large Velcro straps hold the pads firmly over the knees, whether you’re standing up cutting tiles or kneeling to spread grout.

This guide will look at some of the key features to consider when choosing the best pair of knee pads for tiling, including a list of top picks.

What to consider when choosing the best knee pads for tile work

Knee pads come in three different styles: pad caps, hex caps, and shell caps. While hex caps allow the wearer to move more freely, shell caps and cushion caps provide the cushioning needed for tile work. Find out ahead of time about the types of knee pads and what are the crucial factors to consider when purchasing a pair.

Type

Pad Caps: Knee pads with foam pad caps. This makes them more flexible than other types of knee pads, allowing for greater mobility at work. Padded knee pads tend to have a large surface area, which limits their mobility while standing when working with a tile cutter. The soft caps won’t slip on hard surfaces or leave scratches, making them ideal for tile work.

Padded knee pads use foam. This makes them more flexible than other types of knee pads, allowing for greater mobility at work. Padded knee pads tend to have a large surface area, which limits their mobility while standing when working with a tile cutter. The soft caps won’t slip on hard surfaces or leave scratches, making them ideal for tile work. Hexagonal Caps: Hexagonal knee pads are designed to provide support while absorbing impact. Designed for athletes, they are thinner and more form-fitting to facilitate movement in sports from baseball to basketball. These pads are also breathable to allow heat and moisture to escape during intense workouts. Hex pads don’t have a significant amount of cushioning, so they’re not particularly suited to the long hours spent on hands and knees that tiling requires.

Hex knee pads are designed to provide support while absorbing impact. Designed for athletes, they are thinner and more form-fitting to facilitate movement in sports from baseball to basketball. These pads are also breathable to allow heat and moisture to escape during intense workouts. Hex pads don’t have a significant amount of cushioning, so they’re not particularly suited to the long hours spent on hands and knees that tiling requires. Cup Caps: Cup caps have a hard plastic exterior that can protect knees from rough surfaces such as pavement. For this reason, skateboarders and roller skaters commonly use shell caps. This type of knee pad is made of dense, closed-cell foam that provides ample padding and coverage from below the knee to the lower leg. Shell toe tile knee pads have a rubberized layer over the knee to prevent slipping when working on a smooth tile surface.

upholstery material

Flooring knee pads use different types of materials within the knee pads to provide cushioning. Closed cell foam is one of the most common types of padding. Closed-cell foam holds up well to the wear and tear of tile and provides significant padding for the knees.

Gel pads are also a common type of padding used in knee pads. Gel is more malleable than closed-cell foam and conforms better to the shape of the knee. Due to a lack of breathability, both closed cell foam and gel can cause sweaty knees when working in warmer environments.

Most tile knee pads use a combination of closed cell foam with a gel insert to provide the cushioning required for long hours of work off the knees.

Padding thickness

The right thickness of padding for knee pads is a balance between comfort and mobility. Because tiling involves working from the knees, adequate padding is required. However, the amount of padding is a balancing act. Pads that are too thick can be difficult to move in, while pads that are too thin may not have enough padding to cushion the knees adequately. With that in mind, most tile knee pads are about ¾ inch thick to provide comfort while still allowing plenty of freedom of movement.

Adjustable straps

Knee pads have adjustable straps that allow the user to customize the fit of the knee pads. These are useful as the pads may or may not be worn over clothing depending on the user and work conditions. The tightness of the straps may also need to be adjusted when working standing or kneeling. Most knee pads with adjustable straps have a strap above and below the knee. These straps are made up of large Velcro straps that allow the user to make adjustments as they work. Most knee pads are around 7 inches long to accommodate different sizes.

Our top picks

The list below takes the above considerations into account to narrow the field down to some of the best knee pads on the market. These products feature generous padding, ergonomic designs that allow freedom of movement, and straps that keep the pads firmly in place.

Best Overall 1 ToughBuilt Gelfit Knee Pads Photo: amazon.com Check Latest Price These ToughBuilt Knee Pads are some of the most suitable for floor tiling work with their generous padding and freedom of movement in their design. Cushioning is paramount for a job that requires hours of work on your knees. ToughBuilt uses a combination of foam padding and gel inserts that conform to the contours of the knee to provide even pressure and cushioning. This pad extends higher than other pads to support the thigh, which also results in the knee pads staying in place over the knee even as you move from kneeling to standing and back again. This eliminates annoying switching operations that can occur with other pads. The hard-shell exterior disperses the impact of falling to your knees on hard tile. A rubber coating prevents the pads from slipping when working on smooth tiles and also prevents scratching. Buckle straps with Velcro closures above and below the knee allow for a custom fit.

Runner-up 2 Carib Gear Pro Knee Pads Photo: amazon.com Check Current Price A cap design that works well for hours of work on your knees and generous padding make this set of knee pads a worthy choice for that upcoming tiling project. When working from your knees on smooth tile, cushioning isn’t the only deciding factor; Stability is also important. This set has large flat caps with a thick rubber tread that ensure the user does not slip and slide when laying grout. With their great thickness, these pads may not be very breathable, but they have maximum cushioning. Carib takes its cushioning further than most other pads by combining a layer of foam with two layers of gel. These pads also offer versatility as this set includes two 10 inch extensions for its Velcro straps for more versatility with its fit. A pair of work gloves and glasses are included with the purchase of these knee pads.

Best Bang for the Buck 3 Thunderbolt Knee Pads Photo: amazon.com Check Current Price A good set of knee pads for work doesn’t have to be an investment. This set of pads has a design that makes it well suited for those long hours you have to work off your knees at half the price of other high-end knee pads. One of the most notable features of this set is the larger surface area of ​​the pads. The outer shell creates a wide base that distributes the pressure on the knees over a large area while protecting against impacts. A large rubber layer provides excellent grip on smooth tiles while preventing the pads from scratching or scuffing. Underneath the shell is a thick, soft gel core that conforms to the knee and provides ample cushioning for hours of trowel application. Large 7 inch Velcro straps easily adjust to work standing, sitting or kneeling.

Upgrade Pick 4 RNF Supply Knee Pads for Work Photo: amazon.com Check Current Price Knee pads that shift up and down on the knee when transitioning from a standing to a kneeling position are not only annoying, but can also cause uncomfortable chafing , since they have to be constantly readjusted. This set from RNF Supply features two 2″ wide neoprene straps that stretch to fit around the leg, as well as padding around the kneecap that serves to keep the pad in place over the knee, no matter if They kneel to spread mortar or squat to level tiles. This design allows for an outer cap that curves around the knee and upper shin, providing a more ergonomic fit while allowing for better movement when working off the knees. A rubberized grip resembling tire tread provides a non-slip grip while protecting the tile from scratches. Inside the cap is a thick pad made from a combination of foam and gel that provides adequate support and cushioning.

Best Comfort 5 McGuire-Nicholas Shock-Absorbing Knee Pads Photo: amazon.com Check Current Price McGuire-Nicholas uses an innovative design to add a shock-absorbing system to its knee pads, making them ideal for work that requires constant movement, such as cutting. B. Tiling. Unlike other flat-shape pads, these have a duckbill profile that contours from the upper knee to the upper shin. The design reduces pressure on the shin and more ergonomically wraps the knee to promote freer movement. Split-style straps hold the pad securely to the knee while preventing bunching that can cause chafing over long periods of use. McGuire-Nicholas’ focus on allowing movement continues with the cap, which is flexible. The cap features a tread design that provides ample traction while protecting the tiles from scratches. Under the cap are multiple layers of gel and foam padding that provide adequate cushioning for tile work.

Best Heavy-Duty 6 Sellstrom KneePro Knee Pads Photo: amazon.com Check current price Working in harsh industrial environments or on outdoor construction sites where nails, screws and other debris pose a risk, you need a knee pad that offers a higher level of protection. With its hard shell exterior and coverage that extends well over the knee, this set of knee pads can take a significant amount of abuse. The tough outer shell protects against scratches and punctures while remaining surprisingly flexible when crawling, kneeling or standing. A metal rivet hinge facilitates movement between the knee piece and thigh piece. The knee area of ​​the cap features a large rubber pad that provides extra traction when kneeling and prevents the pads from damaging the tiles. Though the outside is sturdy, the inside offers ample cushioning with a gel pack encased in a ¾ inch thick triple layer of closed cell foam.

Frequently asked questions about knee pads for tiles

If you’re still wondering how your new knee pads will work or how to care for them, then read on for answers to these and other frequently asked questions.

Q. How do tile knee pads work?

The purpose of knee pads is to provide protection and comfort to the knees during long periods of kneeling. These pads attach to the knees with large straps. Rigid caps provide protection from debris on the ground or floor, while thick padding takes pressure off the knees while providing cushioning.

Q. How do you know what size knee pads you need?

Most knee pads are not available in size options; they are one size fits all. For the widest fit, look for knee pads with straps that are 7 inches or longer.

Q. How do you wash knee pads?

Do not throw a set of knee pads in the washing machine. Instead, remove any residue from the pads, then soak them in a mixture of detergent and cold water. Let them soak, then rinse with water and air dry.

Q. How do I dry my knee pads after tiling?

Dry your knee pads by storing them in a well-ventilated place or by leaving them in the sun for a few hours.

Some links in this article are affiliate links, which means we earn from qualifying purchases.

Volleyball knee pads are a notorious unit – especially when they’re at the bottom of gym bags, lockers, or suitcases.

It’s nobody’s fault you sweat when you’re working hard on the pitch, but failing to clean your knee pads can strain your teammates’ nostrils.

How to Wash Volleyball Knee Pads There are two methods worth learning. 1) Gentle cold wash with white vinegar and detergent in the washing machine; and/or 2) wash your volleyball knee pads in the shower or sink after games.

There are several situations in which each washing method will come in handy:

And after reading this, you have no excuse for storing smelly knee pads for weeks (or months).

Can you wash volleyball knee pads?

Yes, you definitely can and should wash volleyball knee pads. I think most people asking this are really talking about putting them through a cycle in the washing machine, so let’s go through that process step-by-step.

There are three things to keep in mind:

You should keep the water temperature relatively low; They also keep the spin speed low; and Be sure to add detergent or some form of antibacterial soap.

The temperature of the water you use is important as knee pads are manufactured. Usually with most volleyball specific brands, the fibers of your knee pads are not good at high temperatures.

It could mean that your knee pads are shrinking over time – making them uncomfortable to wear or almost impossible to put on over your shoes.

Second, a gentle or low spin speed will ensure your knee pads stay in place.

If you’ve never had a knee pad that has slipped down too far in its case, folded into an awkward bundle, or just torn at the seam:

I envy you.

Keep the spin speed on a gentle cycle and also try to balance your load with other exercise equipment so the knee pads don’t bump into each other on their own.

After all, that smell coming off your knee pads isn’t just a bad smell – it’s a sign of bacteria lurking in the fibers.

Adding detergent or a mild antibacterial soap is all you have to do to combat this and that is the main reason you should wash your knee pads every 1-2 weeks (at least!).

Can you put volleyball knee pads in the dryer?

Generally speaking:

It’s a bad idea.

There’s no guarantee you’ll ruin your new Mizuno knee pads by tossing them in the dryer, but if it’s not necessary – avoid it.

Here, too, high temperatures and knee pads do not go well together. And if you dry off your knee pads in a hurry before your workout by tossing them in the dryer, chances are you’ll end up with just two knee pads that are more uncomfortable than covered in sweat and stench.

If you’re really stuck in traffic and need to dry your knee pads quickly, keep the heat on a low setting and try putting other clothes, towels, or items in the dryer with the knee pads on.

Remove odor from knee pads without washing them

While the old spray-on-deodorant trick is one of my favorites, you’ve probably learned that this doesn’t last very long. Once you’re back out there, the sweet-smelling deodorant fades and you’ve got that familiar smell.

And when it comes to removing that really strong odor that comes with knee pads and knee braces:

Washing with regular detergent may not be enough to completely get rid of the stench.

What you often find is that after a load of laundry, your knee pads smell pretty much the same, just with an added layer of detergent smell.

The key to removing the odor is to soak your knee pads in white vinegar. Just 60 seconds mixed with water should do the trick.

White vinegar is a natural cleaning agent and works wonders when it comes to getting rid of built-up bacteria and bad odor.

So now we know what it’s all about – let’s jump into the simple guide.

How to clean volleyball knee pads

Method #1: Machine wash

So we recommend that you wash your volleyball knee pads whenever possible. It gives you the most thorough cleaning and is as easy as adding to your regular sport load.

Place your knee pads in the washing machine either directly or in a mesh laundry bag. Try doing this with a full to half full load of similar items: things like exercise clothes and socks. Put some mild detergent in the machine and also add a capful of white vinegar to really attack that deep stench. Run the wash on a cold and gentle cycle – remember that heat and knee pads don’t mix and the gentle spin cycle will ensure your knee pads stay in place during the wash. After loading, allow enough time to dry your knee pads in an open place. Putting them in the dryer in an emergency probably won’t do any long-term harm, but ideally you should avoid doing so.

Method #2: Wash the shower or sink

This is a method that you will probably need to become familiar with if you ever play long tournaments on the go.

Week-long internationals staying with the team?

You may find a time when this method comes in handy and saves your teammates a bit of a smell on the pitch.

Take your knee pads into the shower and drop them on the floor. With the water running, stomp and squeeze the knee pads while you shower. You should notice dirty colored water pouring out of the knee pads when you press them, so keep doing this until this fades. Add some soap to the mixture and then rinse the knee pads until the bubbles are gone. Dry off and hang your knee pads out to dry, hopefully they smell a little better than before.

The same approach can be taken in the sink. Simply fill a sink with water, add some soap (and white vinegar if you have it), and squeeze and squeeze the knee pads under water until they remove the discoloration.

And don’t forget to give them a good squeeze again before hanging them out to dry – this will save you some time at the back end.

Does it matter what type or brand of knee pads?

Since there are hundreds of specific brands, I couldn’t answer that perfectly. But if we stick to the main brands:

How to wash McDavid volleyball knee pads is pretty much the same as washing Mizuno volleyball knee pads.

McDavid actually advocates that you take extra care of your gear – and suggests that you always hand wash your products. However, if you do a gentle cycle after a cold wash, they’re fine in my experience.

When it comes to the long-sleeve McDavid knee pads, making sure you keep the water cold and the bikes on low revs is probably good practice. They’re not the cheapest knee pads out there, but they’ll give you serious support – up to the knee joint, while keeping your thighs and the top of your calves warm.

*If you invest in a pair, they are worth caring for. They will last more than a few seasons and personally I can get on board with the long black style. If you’re looking for a new pair that will last, you can order McDavid knee pads from Amazon.

However, the price changes quite often so I can’t give you an exact dollar amount – depending on the day they might be on sale or full price so it’s just down to your luck!

Summarize

Washing your knee pads regularly is a usual kindness to yourself and your teammates. I won’t stay on my high horse for too long though – we’re all guilty of rushing to practice and donning our sweaty knee pads.

But now that you at least know that you can wash them in the machine, in the sink, or in the shower, and add some vinegar to reduce the smell, you have one less excuse to fall back on.

I’m sorry for that.

Was this post helpful?

If so, share with that friend or teammate who really needs to learn a thing or two about cleaning their knee pads…

And if you want to know how to keep your volleyball shoes and training gear in the best possible condition, visit our resource page where we share our take on the best volleyball gear and how to care for it.

Other equipment resources

Related Articles

How to wash your smelly knee cuffs

Written by Calvin Sun

Coach Nick wrote a great post about the benefits of knee warmers a while back. Here’s the link in case you missed it: The Benefits of Knee Wraps. He mentions that neoprene sleeves can start to accumulate a distinct smell. I’ve worn knee wraps for years and can attest that they definitely start to smell if you don’t take proper care of them.

Method 1: Prevention is medicine

The best way to keep your knee wraps smelling fresh is to prevent mold (and who knows what else) from growing in the first place. If possible, don’t throw your sweaty knee bandages in your gym bag and lock it up until the next training session.

– After use, turn your knee wraps inside out and let them air dry.

Depending on how often you use it, wash your knee wraps with a normal load of laundry as needed and air dry completely before putting them back in your gym bag.

– If you find homeless people grimacing when you walk by in knee warmers, or perhaps the UN has requested your gym bag be inspected for biological and chemical weapons, you should try one of the two methods below.

Method 2: Boil your knee cuffs

I first heard about this method from Freddy Camacho at CrossFit One World. It’s pretty simple, all you need is a pot of water and some soap.

– Boil your knee sleeves in a pot of hot water for about 5 minutes.

– Remove the pot from the oven.

– Add a small amount of dish soap to your sweaty neoprene mildew broth.

– Let your knee sleeves cool down in the pot.

– Rinse your knee wraps and let them air dry.

Method 3: Soak in hot water and vinegar before washing with laundry

The idea here is to use two methods for killing mildew and whatever else is growing in your knee boots: heat and distilled vinegar. Bleach and other chlorine-based cleaners are not recommended for knee wraps. Bleach can potentially weaken the textiles that make up your knee sleeves.

– Heat a large pot of water.

– Pour into a large bucket.

– Add 2 to 4 ounces of distilled white vinegar.

– Add your knee wraps and let them soak for at least 10 minutes.

– Add your knee wraps to a regular load of non-chlorine laundry detergent.

– Allow your knee wraps to air dry completely, you can leave them outside in the sun to speed up this process.

Aside from allowing people to share a squat rack or lifting platform with you, washing your knee sleeves also has the added benefit of tightening them up a bit so you can be sure you have a secure knee brace. As I mentioned earlier, prevention is the best method, but if you (or a friend) have particularly lazy knee boots, consider using one of the methods listed here.

If you’re a parent or an athlete in this sport, you probably know how smelly volleyball knee pads can get if not washed regularly. Especially for players who sweat a lot during training.

The knee pads that we wash in this tutorial are proof that you don’t need to replace your knee pads if you take proper care of them and clean them regularly. I’ve had her for 12 years now.

Yes, I got these in high school.

Now that I’m a coach, I’m constantly asked by parents on my team how I can stop this machine from getting stinky. I thought there must be a lot of moms and dads out there who are really struggling with this problem, so today we’re going to solve the problem.

What will you need:

A bucket to soak the knee pads Vinegar and baking soda Room temperature water A washing machine or sink to wash your hands Detergent An area to air dry the knee pads

The easy 3 steps to no smelly knee pads

Soak in vinegar. Air dry gently

Step 1: The Soaking

The first part is also the most important in this process. The combination of vinegar and baking soda is incredible for getting rid of stains and odors while cleaning. It does absolute wonders when washing knee pads where other cleaning methods just can’t get the stink out of that lather!

First, place your knee pads in the bucket you set aside to soak. Next, add about a cup of white vinegar to the bucket and make sure the knee pads are evenly coated.

You should now dust the knee pads with baking soda, which should start to bubble. This reaction is great for removing dirt and bacteria deep within the pad’s foam. Leave the knee pads on for a few minutes to an hour.

Next, add water to the soaking mixture (about 36 oz) or just until the knee pads float. Allow this mixture to soak for several hours up to 24.

Step 2: Wash your knee pads

After soaking your knee pads, be sure to rinse the rest of the vinegar and baking soda off of them. From here you have two options for washing

Hand wash knee pads

If you don’t have access to a washing machine, you can always wash your knee pads in the sink after soaking. Be sure to use a detergent and gently work it through the fabric of the knee pad. After adequate cleaning, rinse the knee pad thoroughly.

Using a washing machine

I usually choose to use a washing machine to clean my knee pads after they’ve finished soaking. It’s a lot less time consuming to put those babies in the machine and let them do the work.

If you have one, I recommend using a deli bag for your knee pads. I don’t currently own one so I washed my mind without one and had great results as well.

Make sure you wash your knee pads on a cold or warm cycle, NOT HOT. Again, depending on the brand, heat will ruin the fit of your knee pads either in the form of shrinking or destroying their elasticity.

This applies to putting it in the dryer, which leads us to our next step.

Step 3: Air Dry Your Knee Pads

As we’ve already discussed, heat is bad news when it comes to knee pads. You should allow adequate time to fully air dry your knee pads.

This usually takes 12 hours. For best results, turn them over and leave them in a spot outside for an hour or two.

What you should consider when washing

water temperature

You always want to wash in cold or warm water NOT HOT. Knee pads are made from a blend of cotton and polyester. Heat destroys the elasticity of some knee pads, keeping them snug against the body. Others shrink from the heat and can no longer be put on.

Low spin speed

If you decide to machine wash your knee pads, make sure you keep the spin cycle very low. It is best to use the hand wash or gentle cycle of your washing machine. This will prevent the padding from sliding around or folding over in the knee pad.

How often should I wash my volleyball knee pads?

It’s generally a good idea to wash your knee pads about once or twice a month, depending on how often you use them and how sweaty they get. Your teammates will thank you if you wash them more often.

Air out your dirty laundry

You can prevent your knee pads and other sports gear from smelling by allowing them to air out after each workout or game. You don’t want to trap that sweat, especially in a dark closed volleyball bag

Never use a heated dryer

You don’t want to put your knee pads in the dryer. When the fiber is exposed to high altitude heat like a regular tumble dryer, it will warp and not fit properly. The best way to keep your knee pads in reusable condition is to let them air dry. If you’re in a real hurry, you can tumble dry your knee pads on a non-heat cycle.

products on the market

There are several companies in the laundry industry that have geared their businesses to meet the needs of athletes and their parents. These detergents are built by athletes for athletes. They can be a great addition to the washing process.

SweatX

Win sports detergent

When pole dancing, knee pads make it much easier to practice or dance for a long time! They also help with knee problems; hard floors can make pole dancing uncomfortable at best on a hard floor.

However, not all knee pads are created equal – it’s important to get knee pads that will last and perform well.

Choose knee pads that fit

One of the worst things that can happen is knee pads that are too big or too small. Too small, they cut off your circulation and cause pain. Too big and they slide off.

Measure the circumference of your thigh above your knee and your shin below and use the measurements to choose the correct size.

Find open back knee pads

If you’re just doing ground work, a full sleeve is fine. However, if you’re working on the bar itself, you’ll want the backside open so you can grab the bar with the back of your knees.

Make sure you get a breathable material

Sweat is not your friend when you dance. When your knees and legs are sweaty, it becomes difficult to grab the bar. So make sure the knee pads are breathable.

Is there enough padding?

Depending on your situation, you may need more or less padding. If you have bad knees, higher padding can help prevent further problems!

Get knee pads for the dance

While you can use knee pads designed for other activities like volleyball, they don’t work as well as knee pads designed for pole dancers. They’re also often bright white or black, which isn’t as subtle as the skin tones that many bar knee pads come in.

When choosing your knee pads for pole dance, look for high-quality products! We recommend Bee’s Knees – which we also sell in the studio!

When I first started pole dancing, I didn’t want to wear knee pads. None of the Polstars I looked up to wore them. I found it made me harder, sort of OG, not to wear them. No pain, no gain, right? Then I fell in love with floorwork and sliding, sliding, tilting and flipping. And boy did my knees take a hit. I figured it was time for some knee pads.

My first pair of knee pads were inexpensive volleyball knee pads, something I found on Amazon that could be at my house in two days with no fuss. They were cheap and I thought knee pads were knee pads right? NOT CORRECT.

The more I practiced tipping—sometimes landing crooked, sometimes just repeating the same punching motion before learning proper form—the more my knees would flap. I even got bursitis (also known as “maid’s knee”) on my left knee because the volleyball knee pads wore out after just a few workouts and there was no way to replace the padding.

CROSS REFERENCE TO RELATED APPLICATIONS

This application claims the benefit of US patent application Ser. No. 29/126,080, filed July 7, 2000 and U.S. Patent Application Ser. No. 29/126,081, filed July 7, 2000.

FIELD OF THE INVENTION

The present invention relates to knee pads for protecting a human’s patella and manufacturing methods for such knee pads.

1. Background of the Invention

Industrial knee pads are used in a variety of occupations that require occasional to continuous kneeling. Typical users of knee pads include porters, carpenters, roofers, tilers and carpeters. If you have to kneel for a long time, you run the risk of injuring your kneecap (patella). Some of the most common knee injuries (patellar subluxation, knee bruises and bursitis, chrondromalacia patellar syndrome) are caused by weight, pressure, and twisting of the knee.

Knee pads are designed to reduce the risk of injury and provide comfort to the user when kneeling. Typical knee pads are large and cumbersome and tend to travel down the legs. The most common knee pads are made from a closed cell foam that is cut to shape and placed in a fabric pouch attached to a plastic knee cup. Knee pads are usually attached with rubber or webbing straps. Kneepads cushion the knee, while the plastic kneecap allows for pivoting and sliding movement and takes friction off the patella.

2 . Description of the prior art

Knee pads are known in the prior art, which consists essentially of known and obvious structural configurations, despite a large number of knee pad constructions that have been developed to meet different goals or requirements.

SUMMARY OF THE INVENTION

The present invention is a low profile, shock absorbing knee bolster that provides protection to the patella from pressure, weight and abrasion when kneeling for extended periods of time.

The invention uses two different polymeric materials to form a knee bolster structure. The first material is a pliable but durable material that forms the outer knee cup of the knee pad. The knee cup forms the basic structure of the device. A second, softer material is injected into a recess in the knee cup as an insert. The second, softer material provides a cushioning surface for the user’s knee to sink into during use. The invented knee bolster does not use blown foam.

The preferred material for the knee insert is a thermoplastic elastomer (TPE), and most preferably Santopreneg, which is specifically formulated to be used in combination with polyamide or polyurethane for applications where hard/soft combinations are required. The preferred material for the knee cup is an ethylene vinyl acetate (EVA) specially formulated for molding flexible articles.

The knee cup and insert are injection molded in a one-step process. These materials and processes enable the construction of an exceptionally flexible and thin knee pad.

OBJECTS OF THE INVENTION

The primary object of the present invention is to provide an improved knee bolster for use by wearers whose duties require them to kneel frequently.

Another object of this invention is to provide a method of making an improved knee bolster.

BRIEF DESCRIPTION OF THE DRAWINGS

The foregoing and other objects will become more apparent by reference to the following detailed description and accompanying drawings, in which:

COWARDLY. 1 is a perspective view of a knee cup portion of the invented knee bolster.

COWARDLY. 2 is a top plan view of the knee cup of FIG. 1.

COWARDLY. 3 is a front view of the knee cup.

COWARDLY. 4 is a left side view of the knee cup.

COWARDLY. 5 is a rear view of the knee cup portion showing section 7-7.

COWARDLY. 6 is a right side view of the knee cup.

COWARDLY. 7 is a cross-sectional view of the knee cup taken along line 7-7 of FIG. 5.

COWARDLY. 8 is a bottom view of the knee cup.

COWARDLY. 9 is a perspective view of the assembled knee bolster in place on a flexed knee.

COWARDLY. 10 is a plan view of the assembled knee bolster.

COWARDLY. 11 is a front view of the assembled knee bolster.

COWARDLY. 12 is a right side view of the assembled knee bolster of FIG. 11.

COWARDLY. 13 is a rear view of the invented knee bolster, i. H. from the knee side.

COWARDLY. 14 is a left side view of the assembled knee bolster.

COWARDLY. 15 is a bottom view of the assembled knee bolster.

DETAILED DESCRIPTION

Referring to the drawings and particularly to FIG. 1 shows a perspective view of a knee cup portion 10 of the invented knee bolster, the outer cup 12 of which is visible in this view. One of the achievements of this invention is a slim profile of the knee cup. The slim profile allows the wearer to comfortably walk upright and perform kneeling tasks. The outer shell 12 is obtained by molding a polymer, such as polyurethane, with a pliable surface that imparts a rubber-like feel. The knee bolster shell 12 can be polished in a variety of ways depending on the application. For example, the shell can be made with a highly polished shape to allow the knee bolster to slide, or the shell can be made with an unpolished shape, causing the finished shell to have a non-slip surface.

FIG. Figures 3 and 5 show a front view of the knee shell 10. The lower portion of the shell includes two attachment points 16 to which straps 20 (Figure 9) which encircle the upper leg and hold the knee in place are connected. The pliable material allows the shell 12 to conform to the shape of the wearer’s knee, thereby ensuring that there are no gaps. The knee pad is made in two steps. The ones shown in FIG. 1 to 8 is made in a single molding process. A soft cushioning polymer, preferably a thermoplastic elastomer (TPE) such as Santoprene®, or alternatively a urethane-based compound or other compound with similar physical properties to Santoprene®, is injection molded in a single step, forming the insert 14 that is so shaped to fit the kneecap and the harder TPE, urethane, polyurethane, polypropylene, nylon or the like that forms the outer shell 12. The cushioning insert material 14 may alternatively be molded or laminated to the outer shell 12 .

The hardness of Santoprene® is adjusted to provide a soft cushion 14 that can deform the wearer’s knee such that the device conforms substantially to the individual wearer’s patella to ensure comfort and performance in the event of an impact. The molded knee cup 10 is connected to the remainder of the appliance by suturing along an indentation 22 along the periphery of the knee cup 10 on the side opposite the insert 14 . 7 is a cross-sectional view of FIG. The knee cup 10 consists of a polyurethane outer shell 12 and a santoprene liner 14. After molding, both the outer shell 12 and the liner 14 are flexible. FIG. Figures 2 and 8 show the concave shape of the shell 10 which is thin compared to existing knee pads. Ethylene Vinyl Acetate is injection molded on both sides for a finished look.

FIG. 12 and 14 show a pad base 29 for placement between the knee cup 10 and the wearer and extending outwardly from the knee cup 10. As shown in FIG. Although not limited thereto, the pad base 29 is made up of a pad 31, an inner material 24 and an outer material 30. The pad base 29 is fixed to the knee cup 10. FIG. The pad 31 is preferably an EVA or urethane foam to provide proper cushioning and comfort. Alternatively, the pad 31 can be constructed from special open or closed neoprene rubber compounds. The outer material 30 is preferably laminated to the pad 31 and is made of Nylon Cordura, a strong, durable, thick, canvas-like fabric that resists stains and retains moisture. Alternatively, similarly high-strength materials with properties similar to Cordura can be used. The inner material 24 is preferably laminated to the pad 31 for application to the wearer. Preferably, the inner material 24 is flannel: selected for the softness of flannel which can come in direct contact with the wearer’s skin. As shown in FIG. As shown in Figures 9 and 11, the outer material 30 is provided with attachment points 26 for sewing a second strap 28 that sits over the knee of the wearer.

As shown in FIG. As shown in FIG. 9, a series of grooves 33 are compression molded in the pad 31 between the knee cup 10 and the second strap 28 to form a hinge that allows the knee to bend slightly so that the pad base 29 collapses bends with a normal knee movement.

Referring now to FIG. The outer shell 12 of the knee shell 10 is shown in FIG. The outer shell 12 of the knee cup 10 has a generally circular upper portion with a lower portion depending therefrom. The lower portion of the outer shell 12 has two extension members extending opposite each other, each extension member having a hole therein so that the extension member can be used as an attachment point 16 . As shown in FIG. 3, the outer shell 12 defines an indentation 22 along its entire perimeter, this indentation having a depth of approximately one quarter to one half the thickness of the outer shell 12, with a width approximately equal to its depth. Referring to FIG. According to FIGS. 4 and 6, the extensions forming the attachment points 16 are preferably angled slightly backwards.

Referring now to FIG. As shown in FIGS. 5 and 7, the back of the outer shell 12 defines a rear recess 32 . The rear recess 32 has a depth equal to one quarter to three quarters the thickness of the outer shell 12 . The rear recess 32 has an upper portion that is substantially circular and houses the substantially circular upper portion of the outer shell 12 . The lower portion of the rear recess 32 is an elongated portion extending downwardly from the rounded upper recess 32 and is defined by and within the lower portion of the rear surface of the outer shell 12 to FIG. As shown in Figures 5 and 7, the inner bolster 14, also referred to as the insert 14, has the same general shape as the rear recess 32 formed within the rear surface of the outer shell 12, and the insert 14 fills the rear Depression 32 is substantially such that the rear surface of outer shell 12 is flush with the rear facing surface of insert 14.

Referring now to FIG. As shown in FIGS. 9-15, the cushioning pad 29 is securely attached to the knee cup 10 by stitching the cushioning pad 29 to the knee cup 10 along the indentation 22 of the knee cup 10 . As shown in FIG. 11, the cushioning pad 29 has an upper portion 41 with attachment points 26, a middle portion 42 which provides for articulation of the upper portion from the lower portion, and a lower portion 43. FIG. The outer surface of the lower portion 43 of the outer fabric pad 30 of the cushioning pad 29 is sewn directly to the knee cup 10 around the indentation 22 . In Fig. 1l, the cushioning pad 29 is continuous and covers the back of the knee cup 10. Prior to connection to a human leg, the strap 20 is connected from one attachment point 16 to the opposite attachment point 16, and the second strap 28 is connected from an attachment point 26 to the opposite attachment point 26 connected.

SUMMARY OF ACHIEVEMENT OF THE OBJECTS OF THE INVENTION

From the foregoing, it is readily apparent that I have invented an improved knee bolster for use by wearers whose duties require them to kneel frequently and a method of making such an improved knee bolster.

It should be understood that the foregoing description and specific embodiments are merely illustrative of the best mode of the invention and the principles thereof, and that various modifications and additions may be made to the device by those skilled in the art without departing from the spirit and scope of this invention, which therefore is only limited by the scope of the appended claims.