Metal Gate Stripping Near Me? The 135 Top Answers

Dainty wrought iron gates sometimes grace the entrance to older homes or estates. Preserving the beauty of these intricate structures is an important aspect of any restoration project. Serviceable gates made of galvanized steel are also at risk of wear and tear. As with most building materials, the integrity of iron can be compromised by exposure to high humidity, salt water, and acidity. These elements can damage the painted or sealed finish, exposing the base metal and leading to corrosion and rusting. Removing your rusty gate is the first step in restoring it to its original function and beauty.

Do not use heating methods after using chemical strippers. If you are uncomfortable with any of the paint stripping methods or need to remove lead-based paint, hire a professional to remove the paint for you.

Older homes often have beautiful wrought iron railings and handrails that look like works of art. Many of these wrought iron works of art with beautiful, intricate designs have been painted and repainted multiple times. After years of wear and layers of paint, it can be difficult to know where to start when removing all that old paint.

BigEasyIronWorks June 16, 2021 Helpful tips on restoring an Iron Gate

There are various reasons why homeowners prefer to have an iron gate installed in their home.

This type of gate material is known as a reliable security installation to protect property from thieves or unwanted intruders.

Additionally, wrought iron is malleable and easy to weld, which is why the designs you can have are all aesthetically pleasing.

But no matter the size of a material iron gate, it is not immune to damage.

There will come a time when external factors can compromise construction integrity. And when that time comes, how to restore an iron gate?

For a beginner who doesn’t know much about fittings, restoring an iron gate can be quite a task.

That’s why we at Big Easy Iron Works have created this simple guide to help you with this activity.

How do you clean and care for a wrought iron gate?

Before going through the specific iron gate restoration tips and guides, the best thing any homeowner can do first is to maintain the iron gate.

After all, it is better to extend the life of this material than to wait for the time when it will require or require restoration or replacement.

This not only saves you time, but also saves you money because you don’t have to make any other expenses.

1. Wash the iron gate regularly

The first line of defense anyone can do at home is to regularly clean the iron gate surfaces.

Likewise, this is also the cheapest trick in the book to prevent damage of any kind.

There are several ways you can clean your iron gate. However, we recommend using warm water and detergent.

Mix the water and dish soap together until bubbles form.

Then use any cloth or sponge to lather the surface of the gate with the soapy water. You can also gently scrub it if necessary.

After scrubbing, rinse the gate surface with clean water. Leaving it with soap can only cause metal discoloration with repeated use.

2. Always check for rust

Rust is considered the greatest enemy of iron or metal.

Therefore, the wrought iron gate should be cleaned regularly.

See also: Is wrought iron worth it?

If rust occurs, better stop it with rust remover before it spreads.

3. Apply primer or coating

To further strengthen the iron gate’s resistance to damage and corrosion, it is highly recommended that a primer and coating be applied.

The combination or use of either a primer or a paint coat doubles the protection of the metal against rust.

Although wrought iron is already made to resist rust, adding more protection for added security is still better.

4. Don’t forget to grease Iron Gate’s locks and latches

Some homeowners often only pay attention to what they normally see, such as: B. the surface of the iron gate.

But what should also be checked regularly are the locks and bolts of the entire gate system.

An iron gate is often attached to a metal or concrete fence, so special attention should also be paid to this. If not, it may stick or creak due to rust.

Steps to revive an Iron Gate

But by the time you’ve reached a certain point where typical washing and cleaning is no longer enough, your iron gate may already be in need of a restoration.

So how exactly can you restore your iron gate?

Well, the good thing is that you don’t have to spend that much. Likewise, restoring an iron gate requires a few steps from cleaning and maintenance.

1. Clean the iron gate with a wire brush

The first step in any iron gate or fence restoration process is a thorough cleaning.

But you don’t have to use water this time.

You can use a dry wire brush to do the first part of the rust removal. This mainly applies to the top layer of the iron gate, especially the visible scaly parts.

2. Use sandpaper against the surface of rusted iron

For more effective cleaning of the rusting iron, which a wire brush cannot fully do, you can use sandpaper.

The intensity or pressure you rub the sandpaper against the iron or metal depends on what type of restoration you want.

If the gate also needs to be repainted, you may need to rub harder with the sandpaper to remove the latter as well. But of course this incurs additional costs.

3. Remove the rust on the surface of the wrought iron gate: natural and chemical treatment

After scrubbing the surface of the iron to remove the rust with a brush and sandpaper, the next step is either a natural or chemical treatment.

For a more natural and organic method, you can use baking soda or vinegar to remove the rust. In the meantime, for a chemical treatment, you can purchase water-based rust removers from your local stores. The latter method has a higher cost than the former.

4. Wash the iron gate with a solution and remove all residues

After you’ve removed the rust and recoated the metal, it’s best to perform a final cleaning to remove any remaining residue.

5. Coat the Iron Gate with primer and new paint

After thoroughly cleaning the entire surface of the wrought iron, you can now restore it to its former beauty and splendor by applying new paint.

The color of the paint depends on your preferences, but we recommend choosing darker shades as they do not rub off easily.

Also, when choosing paint or coating, don’t forget to consider a rust or corrosion resistant paint. This provides additional protection for the material.

6. Additional Restoration Requirements

If you see more serious damage to the iron gate, such as B. Bent metals that you feel are beyond your own capabilities, do not hesitate to contact Big Easy Iron Works for our best service.

As they say, prevention is always better than cure.

So don’t forget to regularly and carefully clean and maintain your iron gate.

Not only will this save you from future repair troubles, but it will also save you money.

More from Big Easy Iron Works

How to upgrade your iron doors

Your guide to enclosing a porch

Big Easy Iron Works is your one-stop shop for iron products and services in New Orleans. We offer repairs of doors, gates, iron and ironwork for private households and companies.

Winter is here and ready to attack your outdoor metalwork. So here’s our guide to rust and how to combat it by preparing for the harsh weather that’s to come. There is an increased risk of rusting at this time of year due to the increase in wet conditions. Knowing how to treat rust that has already formed and prevent it from recurring in the future is important to keep your gates and railings looking their best.

Rust is the most well-known type of iron oxide, which forms an orange-brown deposit that forms when iron or a ferrous alloy such as steel is exposed to oxygen and moisture for a long period of time. Oxygen combines with the metal at the atomic level, forming a new compound called the oxide and weakening the bonds of the metal itself. High concentrations of salt, sulfur dioxide and carbon dioxide accelerate the rusting process, leaving gates and railings in coastal areas or near busy roads are likely to be affected by rusting sooner than elsewhere.

Rust affects all ferrous metals (metals that contain iron), including several alloys. However, as the metal gates and railings in the Garden Oasis range are made of steel, it is this alloy that we will refer to in this blog.

Steel is forged from iron and carbon in a blast furnace where the impurities are removed. Because it contains iron, steel will rust over time when exposed to the elements. Read on to discover the best ways to get rid of rust.

Manufactured to prevent rust

Since 2019, Garden Oasis has been supplying its prefabricated metal gates and railings electro galvanized and powder coated black to offer excellent rust resistance. Old and weathered gates that are beginning to show signs of rust should be treated using one of the methods detailed below and then repainted using the recommended method detailed at the bottom of this blog.

Another similar process to prevent your steel from rusting is hot dip galvanizing. Iron and steel are immersed in a bath of molten zinc at a temperature of around 450 degrees. This gives the metal a much thicker zinc coating that protects the steel from rusting for 15 years or more. Hot-dip galvanizing offers the best protection against rust; However, the finish will not be as smooth and special paints will be required if you wish to paint it.

Natural or organic rust treatments

baking soda

The first natural remedy for treating rust that we will discuss is baking soda. First, wash the rusted area on your gate or railing, then apply baking soda once the rust is partially dry. When this is complete, let sit for about an hour to give the baking soda time to react with the rust. Finally, use a wire brush or steel wool to scrub the rusty areas until all rust is removed from the metal.

Vinegar

As you know, vinegar can be used for multiple uses like cooking and cleaning. However, it can also be used to treat and remove rust. This organic method is easy as it only requires two simple steps. Once you have identified the rusted spots on your metal gate or railing, soak some clean rags and then wrap them around the affected area so that no rust remains visible. After a night has passed, remove the rags and scrape the rusty areas with a metal brush or steel wool to remove any remaining rust on your product.

Potato and Soap

This unusual method can be quite messy, but will get rid of your rust in no time. All you need is a potato and soap. First, cut your potato in half to reveal the inside, then cover with soap. Once you’ve done this, use the soapy side of the potato as a cleaning pad to rub off all of the unwanted rust.

Chemical rust treatments

evaporation

Non-caustic, non-flammable, and completely non-toxic, Evaporust is another chemical contender that will make your rust go away quickly and easily. This water-based rust remover will not warp or mar any plastic, rubber or painted parts of your metal. However, this product is not ideal for large projects and will not protect your metal gates and railings from future corrosion or rusting.

Hammerite Kurust

Hammerite, known for its metallic paintwork, has created the perfect rust treatment. Kurust does not require a primer or primer for this product to work, it can be easily applied with a brush and does not even need to be removed from the metal. After only 15 minutes your gates and railings are rust free and can be painted 3 hours after use.

Rustin’s Rust Converter Rustin’s Rust Converter

Rustin’s Ready-to-Use Rust Converter is the perfect water-based treatment that quickly and easily removes and neutralizes all rust from your gates and railings. This product provides a protective finish that prevents future rusting and can be overcoated without primer, restoring your metalwork to its original condition.

anti-rust

After you’ve removed all rust from your gates and railings, it’s time to put a stop to it. There are several different exterior metal colors on the market, however Garden Oasis recommends Hammerite for its high zinc content which provides a strong, durable and highly rust resistant finish. Hammerite typically only needs to be reapplied every 5 to 8 years. Always read the directions on the paint can for the manufacturer’s recommended application methods.

Door stripping is high on many renovators’ priority lists – while anyone renovating a home today would appreciate authentic period features like original fireplaces and wooden doors, this hasn’t always been the case.

Sometime in the 1950s, when artificial products were introduced into the home, such as plastics like Formica, natural, raw beauty was out and glossy, laminated looks were in.

For older buildings this meant that from the 1950s and well into the 1960s to 1980s natural wood was often painted over with thick, tacky gloss paint while some paneled doors were just boarded up.

Fortunately, door stripping is now a commonplace job that can be done on a do-it-yourself basis or with professional help.

Door dipping as a method for stripping doors

The cheapest way to remove doors is to submerge them. Door dipping costs around £15-25 per door and most companies offering this service offer collection and delivery for a small additional fee.

Door dipping involves immersing the doors in a solution based on either chemicals or caustics. The doors are then power washed before being dried. This should remove the paint and leave a bare door ready to be sanded, oiled, waxed or repainted.

Before doors are dipped, you must remove door hardware such as latches and handles. Some companies require hinges to be removed as well, while others do not. It’s not uncommon for door hardware to be covered in paint as well – ask the company you use if they remove paint from these too.

While this is a popular method of restoring doors to their original condition, there are a few factors to consider.

Sending doors to specialists for immersion is a quick and effective way to restore them to their original glory (Image credit: N Brinsmead)

Not all woods respond well. Pine strips really good. Oak, beech, elm and walnut can also be dipped but may have a different shade than the original

Check if your doors have plywood or veneer panels. Most companies advise against avoiding immersion as it can cause these materials to warp and, in the case of veneers, the adhesive that holds the layers together will break down

Diving rarely removes stains as they penetrate the wood

Water-based paints cannot be removed by immersion – these must be removed by hand

Although some companies dip doors with glazed panels, there is a risk of damage. If the glass is original, it is better to remove it before sending in the doors

Doors often have a “furry” finish after dipping and require sanding before they can be finished. Many dive operators offer this service at an additional cost.

When doors are returned, it is not uncommon for small stains of paint to remain. Corners of decorative panels and sections of moldings are common areas that require a little more attention. These spots can usually be sanded down or the paint scraped off without much effort.

Your doors also need sanding – usually a quick sanding job with a light sandpaper will do the job easily.

Strip doors by hand

For both water-based and acrylic-based products, hand stripping is the best option. This is also sometimes offered as an alternative for very delicate historic doors or those made from a wood that is not well dipped.

Hand stripping doors costs more than dipping at around £45 per door, although prices vary depending on the number of doors to be stripped and the area you are in.

DIY door stripping

Victorian doors were often paneled. For glazed doors, professional stripping is a great way to ensure the original glass remains intact (Image credit: Purlfrost)

It is possible to do door stripping on a do-it-yourself basis. This should only be done if you are sure the paint you are removing is not lead based or can take appropriate precautions, keep children and animals away, wear a respirator, safety goggles, gloves etc.

Cover all floors and surrounding furniture before beginning.

A stripper such as Nitromors (opens in a new tab) or Kling Strip (opens in a new tab) should be applied to the door. These products are brushed or thickly brushed onto the paint and then left to work. Anywhere from 20 minutes to a couple of days depending on the instructions.

Once the paint has softened and separated from the wood, a scraper can be used to remove the paint. The door can then be rubbed down with a brush and warm water. Stubborn stains can be removed with steel wool or coarse sandpaper.

The door should then be “neutralized” with a mixture of white vinegar or denatured alcohol diluted with water. This prevents “blooming” from developing on the wood.

Finally, use a light sandpaper to work the wood before applying the final finish of your choice.

Heat guns for stripping doors

Some people choose to use a heat gun to remove paint or just for very stubborn areas that were missed with dipping or hand stripping.

It’s important to realize that this can be dangerous if the paint is lead-based, and there’s also a risk of burning the wood if the heat gun is left in one spot for too long.

However, it can also be an effective and quick way to remove paint. Be sure to operate the gun according to the instructions and move it as soon as the paint begins to bubble and blister.

Buy used doors

(opens in new tab) is a great idea if your original doors are beyond repair Buying a remanufactured door from a junkyard or a website like Salvo is a great idea if your original doors are beyond repair (Image credit: Salvo web)

In some cases, old doors are just too badly damaged to restore. Perhaps they have distorted beyond recognition or seriously split. Sometimes original doors are missing altogether.

In these cases it is advisable to visit the scrap or refurbishment yards in your area. Old doors are usually in abundance, and all you need to do is arm yourself with the dimensions of your frames and be willing to sift through rows and rows of different door styles.

In some cases the doors have already been restored from the junkyard, often doors are ready to be renovated by their new owners. This is the cheaper option, but consider the cost of renovations before you buy.

Many novice woodworkers and beginners seem to think that sanding down the paint and finish of wood is the best way to start a furniture restoration project. However, you might be surprised to learn that most professionals will tell you that stripping is often easier and safer than sanding. If you are looking to restore a used piece, you can save a great deal of time, frustration and even risk by opting for sanding down rather than sanding.

Continue below to learn more.

Color and finish stripping

If you are restoring a piece of wood furniture that has a varnish or existing paint finish on it, be sure to remove that varnish before proceeding with your work. As mentioned, it’s common for people to assume that they need to sand down all this stuff; But the truth is that stripping is faster and safer, especially when it comes to paint removal. Using sandpaper to remove paint and varnish requires a lot of work and is also very messy; Especially when the paint is peeling off. Instead, you could get the job done faster with a paint/varnish remover.

For example, you can use a solvent for different types of wood finishes, such as denatured alcohol for shellac and lacquer thinner for lacquer. Simply use a soaked rag to spread the solvent over the work surface, then wipe away with a clean, dry rag once it has dissolved. Another risk factor when sanding paint and varnish off wooden furniture is uneven coloring. When you sand stains and patina, it cuts through the coloring, which can result in an unbalanced color. Correcting this would require sanding the entire surface evenly, which can be quite a challenge, especially for a beginner.

As long as you have enough patience to wait for the solvent to dissolve the paint, stripping is almost always better than sanding. Fortunately, older furniture that has been treated with shellac or varnish quickly disintegrates, turning to mud and easily wiped clean. Regarding safety precautions, it is important to note that some old furniture (over 40 years old) is lead-painted. Abrading with sandpaper can be harmful to health, since sanding dust and dirt would be dispersed in the air.

Do you want to buy the best abrasives? Contact Sandpaper America at 1-800-860-SAND to shop the best sanding products online at the most competitive prices.

You should also read:

What does a wood pulp in order mean?

How do I use sandpaper on wood?

Why use a drum sander to sand wood floors?

How to prep and paint an exterior door to keep it looking good for years?

This question seems to be popular because exterior doors shape the first impression of our homes.

Unfortunately my door looked worse than Big Foot on a rainy day.

But in today’s tutorial you will learn how to fix a sad exterior door.

Let’s dive in!

Tips for painting exterior doors

Chipping or peeling paint can be easily removed with the right tools.

I’ll share the steps we took to get an amazing looking paint job on our door.

Also, don’t miss the tips I got from Valspar after I called their technical support hotline.

Here are the materials you will need for this easy project:

Wire Brush & Scraper ($4.98)

Orbital Sander ($69.00 BUT I promise it will make your life easier on other projects)

60- and 120-grit sandpaper for sanders ($7.98 each)

Dust Mask ($4.97)

Digital Moisture Meter ($15)

Purdy XL 2-Inch Brush ($10.58)

Valspar Exterior Primer ($10.99 for 1 quart)

Floetrol Paint Conditioner ($6.47)

Duramax Exterior Paint by Valspar ($38.98)

The total cost for all your consumables is $176.93.

WHAT????

You may be thinking that this is an insane amount of money to spend on an exterior door and I totally agree with you.

However, most of the costs are incurred with the random orbital sander.

In addition, you can use all these materials for several other projects.

I guarantee that if you follow the steps outlined in this post, your paint job will last several years longer than if you just apply one coat.

Sanding and scraping takes about 30-60 minutes while priming and painting takes 1-2 hours of labor time.

Once you see the end result you will be pleased, even I was a little surprised at how well our door’s finish turned out.

Scratch your exterior door before painting

Walking through our door everyday and seeing the paint peeling off drove me absolutely insane. Day by day it got worse and worse.

If you don’t scrape and sand off your old coat of paint, the new top coat won’t stick. You’ll be painting your door again within a year and you’ll be terribly concerned. That’s why you need to prepare properly.

70% of a good paint job is preparing the surface for the new color.

Scrape and brush as much old paint off the door and jamb.

Grinding of external doors

Now for the fun part. If you’re a DIY enthusiast and will be doing painting or staining projects in the future, a random orbital sander is your best friend.

It will make you look like a pro. My door didn’t have too much chipping paint, but the jamb did.

For this reason, I chose to use 60 grit sandpaper discs for my first pass with the sander.

Our grinder has a micro filtration system that sucks in the paint dust and that’s a cool feature as I hate breathing toxic stuff into my lungs.

In order for the micro-filter to work, the holes in the sanding disc must match the holes on the sanding pad.

My Bosch grinder uses velcro (pretty velcro) type sanding discs. So aligning the holes is not a problem.

Although the micro filter works like a champ, also wear a dust mask or respirator to protect yourself. This provides the perfect opportunity to make your best Darth Vader impression.

Let the grinder remove the paint. You shouldn’t have to press it.

The 60 grit did a great job removing rough spots. You can then use 120 grit discs like I did to smooth any sections on your door or jamb.

It’s amazing how well a random orbital sander works. 5 minutes was all it took us to get to the bare wood at our post.

Painted areas that cannot be reached with the sander can either be sanded by hand or you can use a multi-tool.

I hate to even bring this up because the cost of this project was a bit high, but a multi-tool would be another handy piece of equipment that I would recommend to any homeowner.

Mainly because it can do so many different things like sanding, cutting, scraping, removing grout, whatever.

Test the Door Mostuire level

When you’re done sanding your exterior door, you should take an extra step that most people don’t know: test for moisture.

Valspar technical support told me that the moisture content of wood should be 15% or less. Otherwise the primer and paint will not adhere properly.

Now you might say: “My door is not wood, you idiot”. Our door is metal BUT the stiles that help hold it together are wood.

Stiles are vertical pieces of wood on the left and right sides of the door. And they rest against either side of the jamb when your door is in the closed position. This means they are vulnerable to moisture wicking.

You can buy a moisture meter from Amazon for $15 or rent one like I did (thanks Rob). Simply insert the meter’s probes into your wooden post or spar and the moisture level will be displayed.

Again, 15% or less is correct when using Valspar Duramax exterior paint.

Priming and painting of the outer door

Duramax Paint plus Primer is a premium exterior coating that I have used in the past. But I’m always happy to call tech support for advice on my projects.

And although Duramax includes a primer, Valspar surprised me by saying that I should use a separate primer since my project included some areas of bare wood.

This tip probably saved me some heartache, mostly in the form of peeling paint. My primer gets sucked into the bare wood and then allows the top coat to properly bond to the door and jamb.

And since movie tickets are more expensive than the liter of primer I bought, I didn’t mind taking that extra step too much.

Do you want your outdoor door to impress your friends?

Chances are you said yes. In this case, I strongly recommend using a good roller or brush.

Purdy is the brand I like because the brushes last forever and always give a finish to be proud of. Sure, the brush I’m using here costs $10.58, but it will last 1-2 years with proper care.

What about durability? I’ve been using a Purdy brush for over three years. Sure it’s not perfect, but it still does a great job.

Most doors look similar. There are some panels, a doorknob, mortise locks for hinges and a top and bottom.

Here’s the general strategy to use when priming and painting your door:

Remove the doorknob and its accessories, followed by the hinges. Never paint the hinge slots (because your door won’t close properly afterwards, which is a pain). Prime the door first and allow to dry to the touch or according to the primer’s instructions top and bottom, then left and right stiles (this will prevent your door from expanding and contracting excessively) Start the top coat at the top of the door and then move down. Brush or roll horizontal sections first, followed by vertical sections as you move down the door to drip and brush away

Here is a video showing you my entire adventure of painting exterior doors.

Bonus tip for exterior doors

Super smooth surfaces can be achieved with Floetrol.

It’s an additive that eliminates brush marks or roller marks and is perfect for a front door.

Prior to this project I had never used it and wanted to see if it worked. Flood isn’t a sponsor or anything, in this experiment I was just trying out a new product.

I have to say that Floetrol made a difference. At $6.47 per bottle, it’s not that expensive. Just make sure to choose the right variety as they have one for latex paint and one for oil paint.

Bonus Tip 2: How to prevent paint from sticking to exterior door glass

Paint on glass, there’s nothing uglier! During this project I used Rain-X to help with this problem. And it worked like clockwork.

Rain-X is used on car windows because it beads water and beads easily. It forms a film between the rain and the window.

I sprayed Rain-X on a rag and wiped it across our front door windows.

Be careful not to get the Rain-X on the surface you are going to paint or the paint may not adhere properly.

I’m sure I accidentally got some Rain-X on our window trim, but the finish still turned out great.

I always get paint on glass, but this time it scraped off easily with a razor blade. Sweet is not it? Plus, it’s not a bad idea to use Rain-X on your exterior windows to keep them looking cleaner than your neighbor’s.

People will ask you, “How do you make your windows look so good?”. You then respond with, “I’m just that good, haha.”

The chuckle at the end is optional, but you get the point. With this little tip, your house will look fantastic all year round.

What’s next

Another great project is refinishing exterior door hardware – it saves tons of money and only takes a few hours.

If you’re doing a bathroom renovation and need help, take one of our online courses – they’ll make your bathroom renovation a whole lot easier!

Let me know if you have any questions and I will do my best to help.

As always, thanks for reading, watching and being part of our amazing community.

Cheers,

Jeff

Paint an exterior door

Are you looking for our shop? Click here for our wrought iron garden furniture collection! A guide to wrought iron patio furniture

What is wrought iron? Wrought iron is an iron alloy that became popular as the metal of choice for blacksmiths around the turn of the 20th century. It is a very pure iron containing more than 99% iron, eliminating the risk of impurities that can weaken frames like cast iron or steel. Not only is it extremely durable, it is also a very malleable metal. This means the metal can be hammered, bent or pressed at high temperatures without breaking or cracking. Because of this, it is easy to weld and shape into unique home furnishings. The word “forged” actually means “worked” since wrought iron is “hand-worked”. Wrought iron has been used for centuries and remains a very popular material for making outdoor furniture. It has a low carbon content, giving it a wood-like grain. This means that the different finishes can be used to achieve imitation wood finishes and other signature textures. In addition to its inherent decorative qualities, wrought iron is a very strong metal that was used to make tools, iron warships, railroads, horseshoes, and other products. If you’re looking for patio furniture that will last the longest, wrought iron has stood the test of time with a level of durability that has stood the test of time. Why wrought iron is a worthwhile investment Our guide to wrought iron furniture is designed to help you better understand the benefits of buying this type of patio furniture. The low maintenance and longevity are important factors in understanding why these parts are such a great purchase! Wrought iron furniture is a mainstay in patio decoration. From chat sets to full service dining sets, wrought iron is used to craft a range of furniture. With a superior level of strength, here are six reasons why you should choose wrought iron furniture How strong is wrought iron anyway? Well, here are a few ways it will withstand the elements: Ideal for areas with strong gusts of wind Wrought iron frames are sturdy enough to withstand the beating your kids (and pets) can stand on. An advantage of wrought iron over plastic or aluminum is that it is heavier. This means that in strong winds or storms your patio set will not tip over and be scattered across the garden or even in the pool. Not something you want to wake up to every morning. Even if wrought iron furniture is knocked over, you don’t have to worry about dents or damage because it’s so strong. Rust and Corrosion Resistance Wrought iron owes it’s rust-inhibiting properties to its fibrous nature. Many parts are also powder coated to provide additional protection against rust or corrosion. That’s not to say it will never rust if you don’t take care of it and expose it to heavy rains. No matter what advertisers tell you, all metals can and will rust over time when exposed to inclement weather. However, wrought iron is much better than other types of furniture and that is why some people like it.

To protect the frames, almost all wrought iron patio furniture comes painted to prevent rusting. Exposed metal will rust, so it’s important to protect the paintwork. The lacquering or powder coating of the frames does more than just add a touch of colour. How long does it take? Over time paint can chip and reveal bare metal. Without protection, these spots will begin to rust. To prevent this, you can rework problematic areas with an anti-rust paint in a similar shade. Basic preventive maintenance will help your wrought iron furniture last a very long time. Although the initial cost of wrought iron furniture may seem high, the durability of the furniture means you won’t need to replace anything. With proper care, wrought iron can last for decades and be with you for the rest of your life. Consider this your last patio set! The beauty, shape and style of wrought iron Wrought iron is exquisite in style and taste, able to fulfill your personal longing for an elegant and relaxing outdoor living space to come home to every night. It’s often thought of as a traditional material only suitable for vintage designs, but one look at our diverse collection shows that this notion is wrong. You see, wrought iron is heated and hammered into shapes and can be formed into anything the mind can imagine. This is why wrought iron furniture is so visually appealing.

Fans of traditional design and architecture will get their money’s worth. Elegant curves and graceful arches are a common feature in wrought iron furniture. If you prefer bold contemporary lines, you might enjoy the solid, industrial look that wrought iron offers. Browse from home We invite you to browse our iron furniture collections and see for yourself how wrought iron patio furniture can transform your outdoor space. If you have any questions, please contact us and our outdoor furniture specialists will be happy to help. See contact information below. Cleaning Wrought Iron Furniture Maintenance and cleaning is fairly easy. Our guide can show you some simple steps that will make maintenance a breeze. Remove any outdoor cushions you may have on your furniture, you don’t want these to get messy! Move your furniture away from dirt and grass so you don’t splash mud on the furniture you want to clean. Wipe down the frames with a soft cloth and a mixture of water and dish soap. If needed, a touch up kit can help repair small areas. That’s it! As mentioned, caring for wrought iron is super easy, enjoy your furniture that will last a lifetime. The best way to keep any type of patio furniture in good condition is to invest in furniture covers. While this additional item may increase your initial total, it is guaranteed to save you money in the long run by extending the life of your wrought iron furniture set. Where to Buy You can order directly from us online, or Southern California customers are welcome to visit our San Diego showroom, located off the Old Town exit of I-5. Contact us here. Patio Productions – Fine Garden Furniture

2161 Hancockstr.

San Diego, CA 92110

Phone 1-888-947-4449 Click Here to Browse: Wrought Iron Bar Sets

Wrought iron chat sets

Wrought iron dining sets

Wrought iron sofa sets

6 advantages of using wrought iron for fences and gates

6 advantages of using wrought iron for fences and gates

Many homes today have some type of gate or fence surrounding them. Although there are a number of options like vinyl, wood, aluminum etc when it comes to the material for your fences and gates, wrought iron is considered the best among them as it offers many benefits.

Below are 6 advantages of using wrought iron for fences and gates:

1. Security

Security is the number one concern of homeowners and when it comes to gates and fences, wrought iron is the perfect material to protect your property. A sturdy wrought iron fence around your property acts as a deterrent to intruders. You can also use automatic openers for wrought iron gates for added security and convenience.

2. Easy installation

Many wrought iron manufacturers serve the home improvement market. Their fences are designed and manufactured in panels, meaning you can easily install them over a weekend. This ease of installation is one of the main reasons many homeowners choose wrought iron for their fencing. You simply need to set the posts in concrete 7-8 feet apart, use the horizontal frame for the mounting bracket, and then screw it onto the post. As simple as that.

3. Serviceability

Although the initial cost of installing wrought iron fencing and gates is relatively higher than other materials, the low maintenance costs make this material a preferred choice of many homeowners. Wrought iron requires very little maintenance and if it does, all you have to do is use a wire brush to scrub, clean water to rinse and a coat of paint if it is varnished. That’s all that is needed. And if any part of the gate or fence is slightly damaged, you can easily repair it without replacing it.

4. Adds elegance and value

Wrought iron not only offers peace and security, but also adds elegance and value to your property. No other material can give your property the same elegance as wrought iron. It is known as one of the most versatile materials for gates and fencing due to its many benefits.

5. Durability

Wrought iron is more durable and long-lasting than any other type of fencing material, e.g. vinyl or wood. A wrought iron fence or gate not only withstands daily wear and tear, but also withstands unexpected damage, such as damage caused by cracking. B. a violent impact of a vehicle. Due to its durability and elegance, this material is one of the most popular fencing materials.

6. Many design options

Wrought iron comes in a variety of shapes and designs, giving you the freedom to choose the one that best suits the theme and style of your home. There are numerous design options available for both gates and fences, as well as the option to have a bespoke design made.

Conclusion

In summary, while wrought iron is relatively more expensive than other fencing and gate materials, it is still the preferred choice of many homeowners due to the numerous benefits it offers. All in all, wrought iron gates and fences are definitely a good choice if you are looking for something that will add a high level of security, elegance and privacy to your home.

For premium automatic gates for your home or business, Superior Gate Services is the trusted local choice. For ideas and to see some recent examples of our work, take a look at our gallery page. If you are looking for a new gate or related equipment, we welcome you to contact us either through our website or by calling us at (855) 747-4283. One of our friendly representatives will be happy to answer your questions.