Metal Monkey Bars For Garden Uk? The 25 Correct Answer

Adding a jungle gym to your yard or playground is one of the most effective ways to make the play area more family-friendly and more interesting for kids. However, safety must always be your top priority when selecting and installing a playset. You want to make sure your little ones are safe and nothing is risking their lives. When it comes to installing monkey bars, the finishing material you use underneath matters. Some materials offer better protection in the event of a fall than others.

So what is the best material to put under monkey bars? You need to consider a variety of factors such as: B. Your budget, the size/height of your jungle gym and the visual aesthetics of the material. You also need to consider safety and maintenance costs. Some of the best materials to put under a climbing pole are loose rubber mulch, loose rubber, wood fiber, fine gravel, and play sand.

If you’ve been wondering what’s the best material to put under your climbing frame, then you’ve come to the right place. This post discusses some of the best options, including the pros and cons of each option. So let’s dive in and get started.

Selection of the best material to attach under monkey bars

Ideally, the groundcover for your climbing frame should be safe, attractive, affordable, and low-maintenance. These are the four basic characteristics that most people look for in groundcover materials for their climbing frames.

However, you must remember that when you are in the market you may have to sacrifice one quality for another.

For example, you may have to spend a little more for a safer option, or accept the need for regular maintenance to ensure better optics.

To help you make an informed decision, we’ve rounded up some of the best groundcover materials for climbing frames and highlighted the pros and cons of each option.

1. Rubber mulch

Rubber mulch is a fairly new type of material, but it’s growing in popularity due to its unique ability to provide a relatively nice cushion when children fall on it. It is made of a springy material that also serves as a weed barrier.

The rubber in mulch is usually recycled rubber, making it one of the best eco-friendly materials, but some mulch can contain impurities. To avoid buying rubber mulch full of contaminants, it is highly recommended that you buy from a known and trusted rubber mulch company.

Rubber is one of the safest materials for playground surfaces that require minimal maintenance.

Rubber mulch requires regular sweeping and raking to keep it in good condition, but it’s worth it because it offers a much softer landing compared to other materials. You can rest assured that your little ones won’t hurt themselves if they fall on it.

It’s a great option for parents looking for a mostly low-maintenance material that offers a much softer place to fall when playing.

advantages

It’s relatively easy to install

It is softer and eliminates the risk of injury in the event of a fall.

It’s a relatively low-maintenance option.

It’s also eco-friendly.

Disadvantages

Require regular sweeping and raking to keep it in good condition

Rubber mulch is more expensive than some of the other options.

There can be health concerns over long-term exposure to the small pieces of rubber.

Some recycled tire mulch may contain harmful contaminants.

Rubber mulch can also smell a bit if the temperature is too high.

2. Pea gravel

While fine gravel doesn’t offer the best shock absorption, it does offer the best support. Placing 9 inches of fine gravel under your monkey bars can protect against falls up to 5 feet. However, it can redistribute and compress with heavy use. As such, it needs to be pushed and raked regularly to keep it in good condition.

Pea gravel playground surfaces are made up of small pebbles that give the surface a natural look.

Pea gravel stays relatively clean for long periods of time and does not support the growth of microbial organisms that can pose a health risk to your loved ones. It is also less attractive to animals.

However, you should avoid using it under your monkey bars if you have an infant as it can pose a risky choking hazard.

advantages

It offers a great natural look as it mainly consists of small stones of different colors.

The initial cost of installation is relatively low.

It offers excellent support.

stays clean longer

Compared to other options like play sand, it is less attractive to animals.

Disadvantages

Although the initial cost is low, the maintenance cost is high as they break easily and may need to be replaced regularly to maintain optimal security.

Over time, the chunks of gravel break down into smaller particles, forming a “hardpan” that can cause serious injury if dropped.

Regular raking and shoveling is required to redistribute the gravel for optimal injury prevention.

Not recommended for small children due to choking hazard.

3. Play sand

Sand is less effective at absorbing shock, but its softness is a huge benefit. Nine inches of sand can withstand falls of up to five feet. It doesn’t crumble like gravel, and as long as you rake and sift it regularly, it can serve you for a long time.

In addition to providing a safe surface under the jungle gym, the play sand allows children to have fun building sandcastles.

Sand is a relatively inexpensive option that is readily available and easy to install under your monkey bars. However, lifetime costs can quickly add up due to the need for regular maintenance.

It offers a natural aesthetic and suits most landscapes as long as you keep it clean. Raking your sand regularly is so important because it attracts insects and animal debris and can also hide harmful objects or materials.

advantages

Initial installation costs are relatively low and sand is readily available.

It does not easily deteriorate with use.

Its natural aesthetic suits any landscape.

Children can use the sand for other play activities like building sand castles.

Disadvantages

Sand can easily get into socks/shoes and get into the house.

It can also scrape your knees and absorb more harmful substances that you don’t want around your kids or pets.

You must check the depth regularly and refill any areas that have become shallow.

Sand can hide animal waste and other dangerous items.

Attractive to animals

Can combine with dirt and become compact.

Sand is not ideal for wheelchair users.

4. Wood material (EWF)

Engineered Wood Fiber (EWF) is probably the best filling material you can put under your monkey bars. High quality EWF is usually natural, smooth and compact. It’s relatively affordable and offers excellent shock absorption.

EWF is also easy to install and stays in place better than other materials like sand, making it one of the most popular choices.

However, it does require regular maintenance, especially in the heavily trafficked areas. So if you have a lot of kids playing on the jungle gym, you may need to replace your EWF surface on a regular basis.

Engineered wood requires little maintenance and offers excellent protection when used as playground surfacing.

It’s also important to make sure you’re maintaining the right depth. Normally you should never have less than nine inches of EWF. Before considering installing EWF, make sure your climbing frame is installed in a good location that provides good drainage to maximize the lifespan of EWF.

advantages

It’s very attractive

Non-slip and offers good cushioning in the event of a fall.

It is biodegradable as it is made from ordinary wood.

It’s durable

Does not require regular maintenance

Disadvantages

The initial installation cost is quite high, making it a less attractive option for many people.

Technical fibers made from waste wood can contain harmful impurities.

5. Artificial grass

Installing artificial grass under your jungle gym gives your play area the beautiful look of natural grass without the need for constant maintenance!

Despite being one of the least shock-absorbing materials, it’s still a good option if you want to keep that natural look in your play area. It offers a level surface that is slightly more cushioned than natural grass.

In contrast to natural grass, artificial grass offers more cushioning and better protection for the children.

advantages

Less maintenance is required to keep it in good condition.

It’s visually appealing and complements your landscape quite well as it looks like regular grass.

Has an impact layer and a wear layer

Increase medium wear resistance.

Disadvantages

Artificial grass gets hotter in the sun.

Not recommended as a surface material for high climbing frames as it does not absorb impacts very well.

The initial installation costs are a bit high.

Requires regular washing to remove dirt and repairs may be required if material is damaged.

What is the best material to put under your monkey bar?

The best material to put under your monkey bars mainly depends on the height of the monkey bars and where you installed it.

However, we believe Engineered Wood Fiber and Fine Gravel are the best materials as they meet the required safety standards and are low maintenance.

We truly believe that safety should be your primary concern when choosing the best material to put under your monkey bars. Your children should be able to play freely with the least risk of injury. Cost, visual aesthetics and maintenance should be secondary.

This article was co-authored by wikiHow contributor Hunter Rising. Hunter Rising is a wikiHow Staff Writer based in Los Angeles. He has over three years of experience writing and collaborating with wikiHow. Hunter holds a BFA in Entertainment Design from the University of Wisconsin – Stout and a minor in English Writing. This article has been viewed 109,567 times.

Article overview

X

Making monkey bars is a fun project that only requires two by four, screws and metal rods. First cut wooden boards with a hand saw and a miter saw. Once you have your pieces cut, use a drill to connect the boards into 2 support structures with 3 ladder tiers for kids to climb to the monkey bars. Once the structures are complete, screw in two 88 inch long boards connecting the 2 structures near the top. Between these 2 planks, screw rods about 10 inches apart, which will be the rungs of the monkey bars. Read on to learn how to find the right size poles for your project!

Backyard swings offer children a wonderful way to develop strength and balance and have hours of fun in imaginative play. And without risk, they would be of little interest to young people. But we owe it to our children to make their play environment safe by eliminating hazards.

When choosing a swing set for your kids, consider the following factors:

—A safe, fun, age-appropriate design

– Correct placement in your garden

—Security interface

—Appropriate supervision

—Treated wood versus cedar or redwood

— How to eliminate hazards

Climbing frames that are separate and of reasonable height.

Age-appropriate and safe fun

If your kids are very small, consider swings that can be easily added and grow with your kids. Younger children using equipment designed for older children are the leading cause of accidents on playgrounds and swings. If you also have a component on your swing set, such as For example, a rock face or cargo net that is left unused for a number of years exposes equipment unnecessarily to the elements.

Avoid swing sets that combine the swing beam (the bar that the swings hang from) and monkey bars (overhead ladder). Common sense tells us that children climbing monkey bars fall, and falling onto a swing set or, worse, onto a child on a swing set is a hazard we can avoid. Also, swing trusses are 7-9 feet tall, which is way too tall for jungle gyms. Climbing frames should be 6-7 feet tall and stand alone.

If you are considering a castle swing set, make sure there is at least one easy way for kids to access the castle. Easier access may be a gently sloping ramp, an angled ladder with a backing to prevent feet slipping through, or simple steps. This makes it safer for kids to have lunch in the fort or bring a juice box and easier for you if you want to be in the fort with your kids.

Another consideration is the height of the fort itself. The fort height is determined by the type of slide you choose. The majority of residential swings have 10 foot slides that require a 5 foot high deck or fort. A deck height of 5 feet is more suitable for younger children and makes them easier to supervise. There are commercially available slides up to 14ft long (we have made custom slides 24ft long) that require 7ft high decks making it impossible to reach in to help children or get them off the ground pick up.

The placement of the slide in relation to other accessories is also an important safety consideration. The Consumer Product Safety Commission (CPSC) guidelines for playground safety state that “nothing shall be within four feet of either side or six feet of a slide.” This means that you should avoid swing constructions that place a ramp or ladder next to the slide. The slide should have a side of the fortress to itself.

Regarding swing separation, the CPSC recommends that swings should be at least 22 inches apart. Many swing sets have four swings in a space where only three can safely fit, and I’ve seen a few where the space swings 9 inches apart. When it comes to how many swings your swing set should have, less is definitely more.

The end of the swing frame that is not connected to the fort should be firmly anchored in the concrete.

Finally, all fittings should be recessed or flush with the surrounding material, whether wood, metal or plastic, to prevent exposing a sharp point and snagging clothing.

Where should the swing be placed?

Assuming there are several spots in your yard that are level enough, the primary concern with placement is safety. The place where you place the swing should be free of rocks and exposed tree roots. If there are large trees in the area, have your landscaper trim the dead and near-dead branches.

Make sure the area is fenced off if it’s near a road, stream, or pond.

The other primary placement consideration is visibility from the home. This becomes more and more important as children get older and start playing without adult supervision. I’ve found that most of my clients feel comfortable when the swing is visible from the kitchen or family room.

For those who don’t have level sites and have been told you can’t have a swing set, custom swing sets are the answer. A custom set can incorporate the landscape into the structure or simply create a swing set that is level and safe even when your yard isn’t. I have seen many swings installed on uneven ground without being level. This is dangerous and unacceptable.

safety on the surface

Statistics tell us that 70 percent of swing and playground injuries are caused by falling onto the ground. Knowing this, it makes sense to have a shock-absorbing pad underneath. While the rubber mats found in playgrounds are excellent, they must be laid over asphalt or concrete, and most of us don’t want to pave an area of ​​our backyard. The most suitable surface for backyard sets is called loose fill. It is made of either sand, wood shavings, cedar mulch, fine gravel, or shredded rubber. Cedar mulch and rubber shavings are best, with shredded rubber being unmatched for shock absorption. Shredded gum does not break down or need to be added each season, and it does not encourage fungal growth or attract insects and animals. There should be no roots or rocks under the loose fill material. These will eventually be exposed and pose a hazard.

The fall protection floor needs a border around it so that it doesn’t spread onto your surrounding lawn. The boundary can be made of wooden sleepers, plastic, or composite wood, or a box can be dug up around the swing and the ground can form a boundary. Regardless of what material or border type you choose, the loose fill material should be at least 6 to 8 inches deep. The ejected material from under the slide and swings should be raked back into place periodically. In these high-traffic areas, lay out a piece of rubber mat or indoor/outdoor rug to keep the material in place.

There should be at least 6 feet between the end of the slide and the edge. In the case of swings, the border should be twice the height of the crossbar from the swings. For example, if your transom height is 7 feet, the limit should be 14 feet from the swings, front and back. If you don’t have that much space, make the spacing as large as possible.

At sight

The easiest way to keep your children safe on a swing is to actively supervise them. Discover them on monkey bars, rock walls or other climbing activities. Teach them not to walk in front of swings or on playground equipment.

We know that 95 percent of injuries on slides occur when children climb up the slide, lose their balance and fall over the side. Teach your children not to climb the slide and if there are groups of children in your yard, have an adult stand at the bottom of the slide.

What wood?

Treated wood, which is Southern Yellow Pine, does not have a natural resistance to rot and insects like cedar and redwood and therefore must be chemically treated to achieve these properties. Up until two years ago, the chemical used to treat southern yellow pine was a commonly used pesticide called CCA, which contains copper, chromium and arsenic – all known carcinogens. In the face of regulation, the forest industry has voluntarily stopped using CCA and is now using an FDA-approved chemical called ACQ. Regardless, southern yellow pine doesn’t do as well for swings as cedar and redwood. Southern Yellow Pine tends to chip and break more and is just plain ugly. Cedar and redwood, on the other hand, are much less prone to chipping and can last as long as a wood deck with proper care.

elimination of the hazard

Seemingly innocent objects that aren’t part of a swing have proven to be fraught with danger. These include skipping ropes, bicycle inner tubes, bicycle helmets, dog leashes, sweatshirt tiebacks, mittens attached to jacket sleeves, and climbing ropes. Basically, everything that doesn’t belong in the swing doesn’t belong in the swing.

Climbing ropes that are part of the swing set must be anchored at both ends to prevent a child from wrapping the rope around their neck.

Most important is the supervision. With good supervision, your children will have years of safe fun on their swing.

DOUG FISHKIN has been designing custom swings and playgrounds for 20 years and is the owner of The Custom Swing Set Company in Greenwich, CT. He is also a certified Playground Safety Inspector (CPSI). He can be reached at [email protected] or (203) 861-9399.

Safety guidelines for monkey bars

Climbing frames build strength and dexterity for kids. But they are not without risk. In fact, our data shows that they are one of the main causes of injuries on playgrounds.

Two factors in particular lead to a wide range of upper body and extremity injuries — children’s high center of gravity makes them vulnerable to head landings, and the self-preservation reflexes designed to protect children from serious injury — for example, extending arms when falling — often result in minor, but significant hand, wrist and arm injuries.

Regardless of how children injure themselves on the monkey bars, the following protocols offer a comprehensive approach to keep climbers safe:

Eliminate exposure for younger children:

Ensure that children only use age-appropriate devices.

Children under the age of 8 generally do not have enough upper body strength to safely traverse monkey bars and this device should be off-limits.

Make sure the equipment is properly designed:

Measure the bars to determine they are at least 9 inches apart to prevent pinching.

Ensure there is at least 9″ of resilient surface under the climbing bars to avoid serious head injury.

Keep in mind that a 9 inch surface still may not reduce fractures or minor injuries.

Check the equipment before each use:

Make sure the climbing poles are dry and wipe down if necessary.

Look under the monkey bars for litter and other hazards.

Check each stick to make sure none are loose.

Inspect the surface material beneath the bars for damage or deterioration.

Provide children with guidance on using monkey bars safely:

Only one child should cross the climbing frame at a time in order to maintain sufficient distance.

Don’t stand on top, hang upside down, or play games to try and knock others off the bars.

Do not walk or stand under the bars when someone is using them.

Provide practical support to children:

Have at least one member of staff nearby to monitor the monkey bars.

Have a staff member act as an observer for children under the fourth grade to prevent children from falling or dislocating a limb while climbing.

Prevent unattended use:

Post signs warning children (who may not be with their parents) of possible injury.

Don’t expect children to be able to read or follow the signage.

As an extra precaution, cordon off the playground area to prevent unsupervised use.

Many cities and school districts have removed jungle gyms from existing playgrounds and omitted them altogether from new playground designs. If they are still in the playgrounds used in your programs, review your current practices and add any additional protocols needed to protect your youth, especially the younger, more vulnerable ones.

Oh no! Pinterest only works if you enable JavaScript.

How high should climbing frames be?

We install many climbing frames for clients across the UK and one of the most common questions we get is how tall should my climbing frame be?

We get asked about this because most of our customers are families made up of mom, dad and two or three kids. So, with five people in the family… wait a minute! We mean five people and the uncles, aunts and of course friends, how to choose the best height.

Start with the tallest person.

Does dad use the monkey bars to do pull ups? Since dad is often the tallest in most cases and sons are hot on his heels, it’s a good idea to take measurements first. The measure for monkey bars is from the ground to the father’s outstretched arms and fingers. Then add about 50mm to that and you get a bar height that will ensure his feet are off the ground when hung. In most cases you will be between 2.2 and 2.5 meters tall.

What if it’s just kids using the jungle gym?

Well, if it’s just kids using the monkey bars then we still think monkey bars should be placed at high altitude. Children tend to grow very quickly and learn to use monkey bars incredibly quickly. We installed climbing frames much lower and then received a call to ask if they could be raised shortly afterwards. So in this case, start with a height between 2.2 and 2.5 m and consider the following information:

Now for the first height test of your climbing frame

Take everyone outside and find something that is that height. Something like a branch, pergola, or shed works well. It helps you get an idea of ​​how much we think you need it. It’s a good time to consider post height as well. Remember… they will be 100-150mm above that.

The monkey bars look pretty high and we have small children

The next test is to consider the youngest child (who will actually be using the bars). We believe that most children over the age of 6 will be able to use the adult sized bars. If they’re not quite there yet, we’ve found that they learn incredibly quickly.

Allow them to stretch and measure from your toes to your outstretched fingers. Now subtract this measurement from your planned total height. Regardless of the height you are left with is the height you may fall from. You will soon find that it is high for a small child, but not so high for any child 10 years and older.

Find something that tall and see how easily your kids jump off it.

Go to a park

It’s always worth checking if your local park has jungle gyms. Grab a tape measure and of course your kids and give it a try. They are often quite low and not good for adults. So measure them and see what the difference is between your ideal adult height and the jungle gyms in the park. If they can jump off the ones in the park, you can assess if a little more height is okay.

Consider a crash mat

A nice option for children is a crash mat. You can get these from Amazon. They simply take the edge off as they practice until they get the hang of it. See more if you consider ladder poles (to climb to the monkey bars)

Do you use ladder poles and how many do you need?

Ladder poles for climbing the climbing frame are sold separately. For teenagers and adults we recommend one at each end.

For children we recommend using 4 in total. We put 3 on one end and 1 on the other. The children can climb up at one end and thus get all the way over to the discharge bar. We refer to this as a “perch pole”. Children can settle down here and then climb back up. The cool thing about this pole and NO full ladder poles at that end (apart from the cost) is that kids love to jump off this pole. And guess what? The crash mat is excellent here. Great exercise for kids and super fun for parkour.

Get Olympic Gymnastic Rings

It is worth thinking about acquiring some gymnastic rings. They’re great for everyone, but if you have a small child who isn’t big enough they have something for them to play with too.

Our customers have built homemade jungle gyms for exercise, training, parkour or for their kids to have fun in the garden (or sometimes indoors). So we’ve seen all sorts of jungle gym designs built with Kee Klamp fittings and tubing.

Kee Klamp allows you to build a climbing frame with no cutting required. Additionally, a structure built by Kee Klamp can be taken apart and reassembled with relative ease. An option that is not possible with welded constructions or even self-constructions made of wood. For example, Kee Klamp galvanized pipe fittings have become a popular building material when building do-it-yourself climbing frames.

To give you a better idea of ​​how to build your own jungle gym, in this post we cover the full details of this set built by Ben in Finleyville, Pennsylvania. Additionally, we’ll cover the hardware you’ll need and how to use them so you can build your own climbing frames at home. Let us begin:

Ben’s Monkey Bars Project Details:

Ben uses his monkey bars for exercise and training with various rings and other sling trainers. To develop the design of the structure, Ben used our free design assistance. Josh Borroweic, one of our project team members, came up with a design that worked for Ben and was safe and stable.

To ensure the stability of the structure, the following additions have been made:

A “triangular” (or angled) support is created at the top corners of the frame using the 30 to 60 degree single socket tee. The pipe length in these sections is 18″.

Another “triangular” (or angled) support is added to the bottom of the frame to keep the structure stable. Again, the 30 to 60 degree single socket tee is used to add these supports. The pipe length in these sections is 36 inches.

The horizontal piece of tubing at the bottom of the frame extends beyond the structure. This tube is 8′ long.

Overall, the structure is 8 feet wide, 8 feet long, and 7 feet high. The “rungs” of the monkey bar are 36″ wide and equally spaced. The monkey bar legs are 6″ tall and the “feet” are built with the flange mount. The crossbar at the end of the Monkey Bar allows a variety of movements in combination with rings or other sling trainers.

Since the terrace slopes towards the retaining wall for drainage reasons, Ben used heavy rubber mats to level the monkey bars. Building the structure was a two person job and took about three hours to put together.

Ben was very happy with the project and said:

“Overall a great project, very happy with it and using it several times a week. It’s also a conversation starter for everyone who sees it.”

Required fittings for mounting the Monkey Bars:

Above, we created a Sketchup modal of a set of jungle gyms with a design similar to Ben’s. We removed the bottom horizontal bar but kept the additional supports at the bottom to keep the structure safe and stable.

We have listed all the hardware you will need to build the set of Monkey Bars pictured above. Note that you will need two Single Socket T-Fittings for each “rung” of the climbing bracket. So adjust accordingly. In this case there are 4 “rungs”.

If you want to change the design, please contact our project team first to make sure your design is safe.

Purpose of the individual fittings:

As mentioned above, the design shown here differs slightly from Ben’s design. We would therefore like to explain how and where to use each fitting so that you can build your own climbing frame.

At the bottom of the structure, the flanged connector and the adjustable angle flanged connector serve as the “feet” of the structure. The angled support is added to the leg with the 30 to 60 degree single socket tee.

At the top of the frame at each corner, the side outlet bend is used. Alternatively, the side outlet tee can be used in combination with a malleable plug (to seal the exposed pipe). The angled supports are added to the structure using the 30 to 60 degree single socket tee.

Finally, at the top of the structure, the Single Socket Tee is used to create the “rungs” of the monkey bar. The single socket tee accepts pipe at one end and allows the pipe to slide through the open socket at the other end of the fitting.

This allows the distance between each of the “rungs” to be adjusted if necessary. To adjust the spacing, the set screw on the single socket tee can be loosened (on either side of the “jump” monkey bar), moved into position, and then retightened to secure.

If you need help designing your own climbing frame or simply need help choosing the right hardware, don’t hesitate to contact our team for help. Our team has helped design all types of monkey bar structures (including some for the Spartan Race) and can help you find a design perfect for your application.

Safety guidelines for monkey bars

Climbing frames build strength and dexterity for kids. But they are not without risk. In fact, our data shows that they are one of the main causes of injuries on playgrounds.

Two factors in particular lead to a wide range of upper body and extremity injuries — children’s high center of gravity makes them vulnerable to head landings, and the self-preservation reflexes designed to protect children from serious injury — for example, extending arms when falling — often result in minor, but significant hand, wrist and arm injuries.

Regardless of how children injure themselves on the monkey bars, the following protocols offer a comprehensive approach to keep climbers safe:

Eliminate exposure for younger children:

Ensure that children only use age-appropriate devices.

Children under the age of 8 generally do not have enough upper body strength to safely traverse monkey bars and this device should be off-limits.

Make sure the equipment is properly designed:

Measure the bars to determine they are at least 9 inches apart to prevent pinching.

Ensure there is at least 9″ of resilient surface under the climbing bars to avoid serious head injury.

Keep in mind that a 9 inch surface still may not reduce fractures or minor injuries.

Check the equipment before each use:

Make sure the climbing poles are dry and wipe down if necessary.

Look under the monkey bars for litter and other hazards.

Check each stick to make sure none are loose.

Inspect the surface material beneath the bars for damage or deterioration.

Provide children with guidance on using monkey bars safely:

Only one child should cross the climbing frame at a time in order to maintain sufficient distance.

Don’t stand on top, hang upside down, or play games to try and knock others off the bars.

Do not walk or stand under the bars when someone is using them.

Provide practical support to children:

Have at least one member of staff nearby to monitor the monkey bars.

Have a staff member act as an observer for children under the fourth grade to prevent children from falling or dislocating a limb while climbing.

Prevent unattended use:

Post signs warning children (who may not be with their parents) of possible injury.

Don’t expect children to be able to read or follow the signage.

As an extra precaution, cordon off the playground area to prevent unsupervised use.

Many cities and school districts have removed jungle gyms from existing playgrounds and omitted them altogether from new playground designs. If they are still in the playgrounds used in your programs, review your current practices and add any additional protocols needed to protect your youth, especially the younger, more vulnerable ones.

Enter the characters you see below

Sorry, we just need to make sure you’re not a robot. For best results please make sure your browser accepts cookies.