Shear Sharpening Near Me? The 127 Detailed Answer

Our goal is to provide professional quality sharpening to every customer. We bring our knowledge, cutting-edge technology and over 25 years of experience to the service of the Mid-Atlantic region.

We will bring your knife blades, scissors and other items back into optimal condition. We are committed to the satisfaction of our customers.

The ProEdge is:

EASY – A sharp edge makes your job easier and safer

Expert – Expert sharpening keeps an edge longer

Economical – A great edge requires less sharpening.

Environmentally Conscious – Sharpening allows you to reuse your items

sustainability

ProEdge has set itself the task of setting a high standard for sustainable,

environmentally friendly operation. We’re always looking for ways

use resources wisely and reduce our impact on the environment.

ProEdge strives to run its own business with a balance of costs

effective, sustainable practices and solutions.

You probably sharpen your kitchen knives regularly, but when was the last time you bothered to sharpen your scissors? Probably never. Too bad, because sharp scissors cut quickly and cleanly, and bringing dull scissors back to razor sharpness is no more difficult than sharpening knives.

Now you can buy sharpeners specifically designed for sharpening scissors, but here are four other ways to sharpen scissors using tools and materials you probably already own.

⚠️If using any of the first two techniques below, it’s best to unscrew the scissors and sharpen each blade individually. When the blades are riveted together, you’ll be sure to keep a blade out of the way while sharpening.

Option #1: Use a whetstone

A whetstone, sometimes called a bench stone or whetstone, is the simplest and most traditional way to sharpen scissors. The stone has two sides: typically . Always start sharpening on the coarse side of the stone.

Begin by wetting the surface of the stone with either honing oil or plain water. Then lay the inside of the scissor blade flat on the stone. Applying gentle downward pressure, draw the blade down the length of the stone, from base to tip. Depending on the bluntness of the blade, 10 to 20 strokes are usually sufficient.

What you need to sharpen your scissors

Next, use a permanent marker to draw a black line along the beveled cutting edge of the blade. The line serves as a visual guide and shows when the entire edge has been sharpened. Place the blade on the stone and adjust it so the beveled edge lies flat on the stone.

While maintaining this angle, draw the blade across the stone five or six times. Stop and check the black ink line to make sure you’re holding the blade at the right angle. Keep sharpening until the black line of ink is gone and the entire edge is shiny, indicating the blade is sharp.

This content will be imported from {embed-name}. You may find the same content in a different format or more information on their website.

After sharpening, check for burrs along the inside edge of the blades. Remove the burr by laying the inside edge of the blade flat on the stone and then drawing very lightly across the stone.

Now turn the stone over, wet the surface, and sharpen the blade’s edge to super sharpness by sweeping the beveled edge across the fine-grained side of the stone. Here, too, 10 to 20 strokes are sufficient.

Repeat the steps above to sharpen and sharpen the other scissor blade.

Option 2: Use a rotation tool

A portable rotary tool, often referred to as a , is an extremely versatile power tool that can accommodate a variety of attachments, including rotary whetstones ideal for sharpening scissors.

⚠️ Always wear safety glasses when using a rotary tool.

Begin by clamping the scissor blade firmly in a vise, beveled edge up. Next, insert one into the rotary tool and tighten the collet nut. Hold the tool firmly with both hands, turn on the motor and place the sharpening stone very lightly against the beveled edge.

Now – and this is important – keep the stone at the same angle as the beveled edge and keep the stone moving at all times. If you stop in one spot for even a second, you’re grinding a hollow in the blade.

Using very little pressure, pass the rotating stone over the beveled edge from base to tip eight to ten times. If you feel burrs on the flat side of the blade, grind them down with the stone.

Repeat the above steps to sharpen the second scissor blade.

Option #3: Cut sandpaper

If the scissors are very dull or damaged, the two sharpening methods described above are required. However, if your scissors still work but cut roughly, try this trick: take a blade and fold it in half so the sharpening surfaces are facing out. Now cut the sandpaper into narrow strips with the scissors. Be sure to make full cuts to expose the entire edge of the blades to the sandpaper.

The abrasive particles on the surface of the sandpaper act like tiny whetstones, sharpening the cutting edge of both blades at the same time. Wipe the blades clean with a cloth or paper towel to remove abrasive grit. Test the scissors by making several cuts in scrap paper. If necessary, repeat the process.

Option #4: Cut aluminum foil

This technique is similar to cutting sandpaper, except you use aluminum foil. Again, this will easily sharpen dull scissors, but will not sharpen scissors with very dull or damaged blades. Start by tearing off a piece of foil about 30 cm long. Then fold the foil several times until it is at least six layers thick.

Now cut the package of foil with scissors into 10 or 12 strips. Test the sharpness of the scissors by cutting off some old paper. If necessary, cut several more strips of foil until the scissors cut quickly and cleanly.

Finally, wipe the blades clean to remove any tiny bits of aluminum.

🎥 Watch now:

Joseph Truini Joe is a former carpenter and carpenter who writes extensively on remodeling, woodworking and tooling techniques.

This content is created and maintained by a third party and imported to this page to help users provide their email addresses. You may find more information about this and similar content on piano.io

Scissors in the art room can quickly become dull when so many students are sharing them and cutting who-knows-what! However, sharpening your inexpensive classroom scissors is easy and can breathe new life into dull scissors that you might otherwise just throw out and replace. And the best part is, you probably already have everything you need to do it!

1. Plain aluminum foil is great for cleaning scissors, straightening and aligning blades, and smoothing small amounts of rust and rough edges. Here’s everything that goes with it:

Tear off about 12 inches of foil and fold it in half three or four times. (If you’re using heavy foil, it doesn’t need to be quite as thick.) Then simply use long scissor strokes to cut your foil into strips. Finally, do the same with a piece of wax paper to lubricate the blades. (I’ve heard you can also sharpen punches this way, although it’s never worked well for me. Maybe mine were just too far off!)

2. You can also sharpen your scissors by cutting through a piece of fine grit sandpaper. This might be a little trickier for your scissors, but it really works! Cutting a piece of steel wool has a similar effect and is great for removing rust.

3. Another method is to run the blades of your scissors against the edges of a safety pin. Using a reverse cutting motion, start with the pin at the tip of your scissors and pull it back toward you as the scissors open. (You can also use a regular pin, but I find a safety pin is a bit easier to carry in my pocket!)

Repeated sharpening using these techniques can eventually wear down the steel of your scissor blades, but it’s worth considering whether the alternative is to buy newer ones. Letting your old scissors last a little longer and making better use of them is the greener and more economical way!

But read on to learn the best way to sharpen your scissors…

4. Finally, the Smith 10 Second Knife & Scissor Sharpener is a great investment (for very little money). For less than $10, you can sharpen both left- and right-handed scissors quickly and easily, and it’s so easy to use, your students will want to do it for you! You can also use this sharpener at home to sharpen your knives and use your X-acto blades even longer. Check out all the great reviews for this sharpener on Amazon! (Note: This is an affiliate link and not a sponsored post. I have not received any payment or free products to promote this sharpener. I am sharing it because I love it and I think you will too!)

Of course, it goes without saying that any really expensive, high-quality scissors should be sharpened by a professional or through the skillful use of a sharpening stone or wheel to preserve the integrity and original angle of the edges. But most classroom scissors (like mine!) are probably not worthy of that care!

Do you sharpen your scissors or just replace them when they become dull?

At Scissor Tech we know all about professional scissor sharpening thanks to our experience working with world-renowned bladesmiths. We do not sharpen scissors ourselves, but we will definitely support you in the care of your hairdressing and hairdressing scissors. Especially if you bought your hair scissors from us!

We want you to have a long and happy relationship with your professional handcrafted steel shears. A big part of that long life is keeping them sharp.

So we interviewed an experienced bladesmith to pass the information on to you so you know everything there is to know about professional scissor sharpening.

If you are new to the hairdressing trade and need a cutler to sharpen your shears, we recommend asking a colleague to recommend one for you, or doing a little research and asking a few questions before entrusting your investment to a cutler .

Q. What should I consider when looking for a cutler to sharpen scissors?

Some people will tell you that mobile bladesmiths aren’t as good as the storefront ones, but that’s not true. Mobile cutlers tend to be just as experienced and have access to the same equipment from their van. Being mobile means you don’t have to leave the salon, which is a convenient option for many barbers and barbers. You will also get your scissors back, usually within an hour, on the same day.

If you decide to go with a bladesmith, ask if they have access to loan shears while yours is sharpened. You can be without your scissors for half an hour to an hour, even longer if the salon has multiple pairs that need sharpening. You should expect rental shears to be of similar or better quality than the ones you are using. Often the rental scissors are a good indication of how much a bladesmith cares about their work.

Q. How often should you sharpen your hair scissors?

Most barber scissors need to be sharpened every 3-12 months depending on usage. But a hairstylist who only cuts part of their day to do color treatments and blow waves can potentially leave 12 months between sharpening. A hairstylist who only cuts will probably need their scissors sharpened quarterly. But it’s a personal preference, what feels sharp to one person may seem dull to another.

If a pair of scissors falls, they need to be resharpened. Some people think that dropped scissors will become unusable, but that’s not the case unless the tip has broken off.

Most professional quality scissors can be sharpened 10 or more times before needing replacement.

Q. How does a barber know when to sharpen their scissors?

Dull scissors will cause hair to bend, fold, catch, or push off the scissors. Fallen scissors also need to be sharpened. Sometimes scissors need maintenance and sharpening because they were used on clients’ dirty hair. When a customer visits the salon or hair salon with sand or dust in their hair, the particles dull the scissors. Hair products like gel or mousse can leave a sticky residue on the scissors that can be difficult to remove without maintenance.

Q. How does a cutler sharpen scissors?

A bladesmith begins by checking the baseline of how the scissors work before taking them apart. The scissors are disassembled and checked for nicks, corrosion and rust and removed.

The scissors are then placed on a specially made barber sharpening machine. These are specially designed and can cost many thousands. The machines allow for very fine adjustments of up to half a degree to the current blade angle, or the angle can be changed entirely to suit the style of cut desired. The scissors are closely inspected to ensure the blade is well balanced over length.

The scissors are ground and polished. The tip of the scissors is shaped to be secure and provide some protection if dropped in the future.

The reassembled scissors are tested by cutting a piece of folded wet wipe. The cut should be a straight line following the line of the blade. If the scissors don’t cut properly, the fabric won’t have a clean cut and may end up fraying. If the scissors fail the tissue test, they are taken apart for further work.

Q. Can a cutler damage scissors by sharpening them incorrectly?

Yes, if the stone used to balance the scissors is too coarse the Ryde line can be damaged or the scissors will not polish to a mirror finish and will catch and pull.

Lower quality machines do not have multiple honing wheels, so the carbide and aluminum oxide wheels must be swapped out to achieve the best finish on the scissors. Replacing discs can be time consuming, so a bladesmith may be tempted to use only one disc.

Bladesmiths with high quality machinery have direct access to five discs and the maker’s knowledge to achieve a better surface quality.

Q. Are scissors made in Japan sharpened differently than German scissors?

Yes, it is much faster to sharpen German scissors because there is no Ryde line like Japanese scissors.

The other differences between the two types of scissors are that Japanese scissors are hollow ground and German scissors are flat ground. German scissors are sturdy, so better suited to barbers, but don’t have the razor-sharp edge that Japanese scissors have.

Q. How do you sharpen thinning scissors? Worried about all those teeth?

Yes, the teeth are rebalanced on a flat rock. They go through a few different types of flat stone before being polished off. Depending on the number of teeth, it can be difficult to sharpen them properly.

The folded tissue test is used to check if all teeth are sharp.

Q. When do you know that scissors can no longer be sharpened?

Some bladesmiths will tell you that their scissors can no longer be sharpened, but this is often not true. Good quality scissors can usually be sharpened about 10 times or more before they need to be replaced.

Q. Do old scissors have to be thrown away or can they still be used for something?

Old scissors can be reused with a harder angle.

For example, scissors used on women’s hair can have a harder angle, and on men’s hair, scissors can be used to scissor over comb cuts.

Scissors can be fitted with fine serrations to keep them feeling sharper for longer and ideal for cutting straight lines.

Best Selling Hair Scissors Browse Scissor Brands Browse Home Scissors

Cutting your own hair looks easy enough in videos, but getting a good cut is harder than you might think.

Most people who try to cut their own hair end up with an uneven cut and often damage their hair as well.

The main reason for the hair to become uneven and damaged is that the scissors that people use are too blunt.

A sharp pair of scissors will give you a much cleaner cut and you won’t fray the ends of your hair as much. Think of it like cutting fabric.

When you use regular, dull scissors to cut fabric, you usually end up with frayed or split edges. You don’t want your hair to end up the same way, so use nice and sharp scissors.

Of course, most people don’t know how to tell if their scissors are sharp enough to cut hair.

This article will help you determine if your scissors are sharp enough to cut your hair and why you should use hair scissors instead of kitchen scissors.

Signs that your scissors are not sharp

Before you cut your hair, you should always make sure your tools are in good working order.

Sharp scissors play a big part in this, and it’s easy to spot a dull blade once you know what you’re looking for.

Below are three common signs of a dull scissor blade.

1. Fold hair

If your hair creases as you try to cut it with the scissors, it usually indicates a dull blade or means the tension control on your scissors is too loose.

Try tightening the tension control more first, but if that doesn’t work your scissors need to be sharpened.

The problem with folding the hair in the blade is that you will end up with a very uneven cut and your ends will likely be damaged by the pressure of the blade.

2. Loud scissors

All scissors make noise when they cut, but if you notice that your scissors are particularly noisy, it could be a sign of dullness or small nicks.

Nicks in your blade are bad during a haircut as strands of hair can get caught and you end up pulling on your hair.

If your scissors are noisy every time they open and close, consider taking them to a professional sharpener to have them checked.

3. Difficulty cutting

Problems penetrating the hair is a clear sign of a dull blade. Your scissors should be able to cut strands of hair like butter.

If you have to keep sawing through your hair with the scissor blades, they are not sharp enough to cut hair.

Either replace your scissors or have them sharpened before using them again.

You can use a simple test to determine if your scissors are sharp enough to cut hair.

Take a piece of single-ply facial tissue and gently place it between the blades of your scissors.

Take your thumb off the handle of the scissors and gently press the top of the handle to close the scissors.

The blades should cut cleanly through the tissue. If the blade snags at all or doesn’t cut through to the point, your scissors need to be sharpened.

The difference between kitchen shears and scissors

A big mistake most people make when trying to cut their own hair is that they pull kitchen scissors out of the drawer.

The problem with kitchen scissors is that they tend to be quite blunt. Think about it.

When was the last time you sharpened your kitchen scissors or even your office scissors?

Probably never, right? Well, it’s difficult to cut in a straight line if your scissors are dull.

The other problem with kitchen scissors is that the blades are just too big for a precise cut.

If you’ve ever seen a barber’s scissors, you know how thin and sharp they are.

Hair clippers are made for precise cuts and clean lines. Plus, if you’re just using them to trim hair, they stay really sharp.

Conclusion

All in all, if you want sharp scissors, then stick with hair clippers. Kitchen scissors will cut your hair, but the final look won’t be nearly as clean or even.

If you only have kitchen scissors, at least make sure the blades are sharp so you can get through strands of hair without a lot of pulling or fraying.

Your hair and head will thank you if you use sharp scissors when your adventure of cutting your own hair is over.

Pack your knives and head to a nearby Ace, where a Resharp-trained operator will quickly sharpen your edge in 90 seconds or less for just $6.99* per knife (*recommended retail price).

Are you going to Whole Foods this week? Bring your dull knives and gardening tools and we’ll sharpen them while you shop for groceries. Howe Sharp’s truck regularly visits several Whole Foods and Farmers’ Market locations, as well as a few other local businesses.

Check our calendar to see where we’ll be this week!

Leading Edge Sharpening specializes in all types of sharpening for professional groomers, groomers, industrial, cooks, hobbyists and home use. If you need scissor or blade sharpening services, blade sharpening or lawnmower blade sharpening, please see the list according to your industry or needs. If you don’t see your tool or item on the list, let us know!

We also offer spare parts and repair services for pet dryers and hair clippers.

There’s no denying that professional hairdressers need professional tools – especially since it’s not just about their client’s hair, but also their reputation. After all, people love to talk about good experiences, but they just LOVE to share bad ones.

However, if you have looked through professional hairdressing scissors before then you must have realized that most are quite expensive – some of them costing several thousand. While it may not really come as a surprise to anyone who has been in the industry for years, it doesn’t mean it doesn’t raise questions like “why are hair shears so expensive?”.

There are a few reasons hair clippers cost so much, some of which we’ve listed below. So if you want to find out why the best hairdressing scissors are often also the most expensive, just read on.

Made from better materials

This is probably the number one reason professional scissors cost more than regular ones. Expensive scissors are made from higher-quality materials, such as Japanese stainless steel, which is often considered the best material for professional scissors in the world.

Depending on the origin of your scissors – whether German, Japanese, French, etc. – the brands use different types of steel.

For example, here are the types of steel that Japanese brands commonly use, ranked from highest quality (level 6) to standard quality (levels 1 and 2):

Hitachi ATS 314 – Stage 6

Hitachi 440c – Stage 5

V10 (VG10) – Level 4

V1 (VG1) – Level 3

440C – Stage 2

440A – Stage 1

Sometimes manufacturers will advertise a product that is made from the highest quality materials but make sure it costs less than $50. The truth is that professional hairdressing tools, especially those made from such good material as Japanese steel, for example, will not come at such a low price. It just wouldn’t be profitable for the company that makes them.

Professional scissors are designed to last a few years at least, so it should come as no surprise that their condition matters a lot. If the scissors are properly cared for, they can sometimes even last for decades.

It’s also important to note that some of the scissors you see on professional hairdressing websites like Scissor Tech contain Swarovski crystals, which, let’s be honest, aren’t the cheapest either. It’s also one of the reasons why some pairs are more expensive than others – the procedures need to recoup the money they spend on details like these crystals.

Made for professionals

It’s important to remember that salon shears are not made for home use. They are a tool for hairdressers that they need to perform at their best. Sure, you can use them at home if you really want to, but the truth is that if they’re only used a couple of times a year, it might not be worth it.

On the other hand, professional barbers use theirs at least a couple of times DAILY. Understanding why professionals don’t mind spending a few hundred (or thousands) on a pair of barber scissors is actually quite simple and involves a lot of basic math. The easiest way to say it is that they can afford it since it’s their tool of the trade.

Let’s say an independent hairdresser bought a pair of scissors that he will use every day for $2,000. They charge $30 a haircut. In a day they perform an average of 5 such haircuts. They work 5 days a week which means they can make $750 in that one week. Assuming they save $200 each week to later reinvest in their business, they can recoup the amount they paid for their scissors in 10 weeks. That is if they only do haircuts, but most barbers, whether they are self-employed or work in a salon, do a lot more, which means it doesn’t take 10 weeks – maybe around 5 or 6 weeks.

Serve different purposes

Cheap hair scissors are usually not adapted to certain hair types, which can be very harmful, especially with sensitive hair. Professional tools, on the other hand, come in a variety of shapes, all suited to different types of haircuts.

Take scissors used for thinning hair as an example. Use different scissors depending on how thick the hair is and how much of it you want to thin out. If you are dealing with hair that is not too thick, you can opt for regular thinning scissors as they will do the job well. On the other hand, if your client’s hair is thick or curly, it’s best to use wide-toothed thinning scissors.

more customizable

One of the great things about professional hair clippers is that they are meant to fit you and your preferences – not the other way around. That’s exactly why there are so many items to choose from.

First of all, the handle design. There are a few types of grips on the market, but the classic and offset grips seem to be the most popular choices. Which one is right for you depends mainly on how you hold your scissors.

Another thing you can “personalize” is the blade. Do you want your hairdressing scissors to have a beveled or a convex edge? There are a few things that can influence your choice, but in general, convex edges are more recommended for experienced barbers, as they won’t have as much trouble controlling them as a beginner would.

Next we have the option to choose between right and left handed scissors. When it comes to regular scissors, there is no such choice – it’s not a big deal as left-handed people sooner or later get used to using right-handed scissors. However, when it comes to cutting hair and being a barber, it is crucial that the hair scissors are comfortable for you to grip as it can be a matter of life and death (maybe not literally but you get what we mean ). It’s about giving your client sharp cuts.

Something that may be less important to some, but still appreciated by many, is the ability to choose the color of your scissors. In most cases regular scissors are only available in silver – if you are lucky you might find them in black. But that’s all. Professional scissors, on the other hand, come in a variety of colors. If you decide to shop on our site, you will find that we offer pink, rainbow, rose gold, silver and matte black scissors.

Last but not least, scissors may or may not have the finger rest. Many of the expensive scissors have a removable finger rest, as some hairdressers prefer to work without. If you change your mind one day, you don’t have to buy a whole new set of scissors, you can simply screw the finger rest back on. Many hairdressers swear by it, because a finger rest ensures that work is as comfortable and pain-free as possible.

Longer Guarantee

In most cases, companies that offer expensive premium scissors offer a much longer warranty than retailers that offer regular hair scissors. It is actually very practical for them, because the guarantee usually remains unused, but the customer still has the certainty that a manufacturer stands behind his product.

Here at Scissor Tech we offer our customers a lifetime guarantee because we know how important it is to be able to rely on the company you bought them from to help if something happens to your hair clippers and you Don’t end up throwing your money down the drain.

name recognition

While all of the above things have a bearing on why premium hair clippers cost so much, brand is also one of the factors that influence this.

Just think about it – there are many brands that are more expensive because they are that particular brand. And it’s not just that, for example, a famous person is promoting them, as is often the case, but because the products they offer are frankly so good that people just don’t mind, so much for to pay something from them.

Take Joewell or Matsui as an example — both of these companies are on the expensive side, but people still buy them, love them, and buy them again. Why? Well, there are many reasons. They’re made from Japanese stainless steel, one of the finest materials on earth, they’re aesthetically pleasing, they have sharp blades, and they’re crafted with precision that many may be envious of. While it is not easy to make such an investment, you can rest assured that if you buy something from these companies, it will last you for a very long time.

The final result

When it comes to hair management, having the right tools is paramount. For example, if your scissors aren’t sharp enough, they could damage your client’s hair, which is probably the last thing you want.

If you, as someone who is not in the hairdressing industry on a daily basis, have ever googled what a pair of hair clipping scissors cost, then you were probably surprised at how much a pair of barber or hairdressing scissors actually costs. Having said that, it must be said that barber scissors can be expensive, but not without reason.

First, they are made of better materials than regular scissors, such as B. Japanese steel. They are also, as the name suggests, for professional use, meaning they are not aimed at anyone who is not a member of the industry. In addition, various types of scissors are available so that every hair type of the customer can be easily cared for.

Professional scissors are also more customizable as you can choose what type of handle design or blade you want.

Here at Scissor Tech we offer a variety of durable professional grade scissors, all from reputable and established brands that craft their tools from the finest materials including Japanese steel. And if you’re not quite ready to dive into pro-level tools, we also offer kits that are perfect for trainees or just anyone who wants to grind their teeth into hairdressing and haircutting.

If you have any questions about our products, do not hesitate to contact us! We will be happy to help you choose the best match and solve any doubts you may have. Thank you for choosing Scissor Tech!

One of the most common questions we get asked about hairdressing scissors in Australia is “why are they so expensive?” and that’s a really good question.

If you’ve been using barber scissors for as long as I have, stop thinking about the price as you can see that a good pair will last 5 to 10 years and cut almost every day.

The reason hair clippers and thinning scissors are so expensive is due to the higher quality materials and craftsmanship that go into making professional quality scissors. Professional hairdressing scissors are more expensive due to their high quality steel, sharper blades and professional quality guarantees.

The reason hairdressing scissors are so expensive is because they use high quality materials such as:

Hairdressing scissors designed for professionals with high quality craftsmanship and the best materials available

These professional tools are designed for everyday pruning and will last five, ten or twenty years

The expensive quality steel used to make hairdressing scissors keeps the blades sharper longer, and is resistant to corrosion, rust, and physical damage

Professional ergonomics, such as An offset or crane design, for example, allows for a more comfortable grip that reduces fatigue, allowing barbers to trim while standing for five or ten hours

The tension adjustment screws and gears are uniquely designed to hold the pair tight even after 5,000 haircuts

So when we ask “why are hairdressing scissors so expensive compared to Kmart or Priceline scissors?” we know that they are as sharp as your last haircut every day and will last for many years to come.

So if you are looking for the reason why the prices of regular scissors and hairdressing scissors are so different, then now you know that the expensive price means quality.

The old adage “you get what you pay for” applies to many things, but hair scissors are an exception. What you’re looking for in a quality pair of hair clippers has far more to do with their construction than their price, and you should also consider the cost of sharpening. If expensive $200 pair of hair scissors will do an extra 100 haircuts but can’t be easily sharpened and therefore need to be replaced, it’s not a good investment. So what do you look for in a quality pair of scissors, and should you have to pay an arm and a leg for them? Not at all. A good set of hair scissors, with proper care, should last up to 400-500 haircuts before needing to be sharpened or replaced. Since your average haircut costs anywhere from $10 (for men) to $100 (for women) and beyond, that’s a pretty big return. There is no reason to spend extra money on expensive hair scissors and limit those gains. High-quality hair clippers simply last longer. Stainless steel hair scissors will last much longer than lower quality materials as they do not rust easily and will keep their cutting edge for many more haircuts. There are tons of stainless steel hair clippers for anywhere in the $40 price range; Simply paying more is not worth the investment. Another factor to consider is the price of shear sharpening. A good scissor sharpener costs between $15 and $30 plus about $10 for shipping, with the higher price range being reserved for scissors with convex edges. Beveled edge will save you quite a bit of money if you intend to keep using the same hair scissors. However, if you find a quality stainless steel hair scissors you like, in the $35-$60 range, it might be a better idea to completely replace your scissors. That’s a cost decision you wouldn’t even consider with a $200 pair of scissors – but with inexpensive, good quality scissors, you can get a new pair without waiting for the scissors to be sharpened. For both home users and professional hairdressers in beauty salons, hair scissors do not work by themselves. No matter how expensive those hair clippers you have been looking at, they will not cut hair for you and will not give you a better cut quality. What you are looking for in expensive scissors is simply a measure of their quality so you can cut hair more easily and without prolonged sharpening. Stainless steel scissors with beveled edges are the best choice for quality hairdressing scissors because they last the longest and are the least expensive to resharpen. If you’d like to see some examples of beveled edge hair clippers that, with proper care, will last up to 500 cuts without breaking the $60 budget limit, try our store at www.theshearsdepot.com. Julie N Sullivan – August 10, 2009