Skateboard Bearing Cleaning Kit? The 80 Top Answers

Yes, you can use household items to clean those delicate parts of your skateboard! You don’t need to worry as long as you know how to disassemble and reassemble a camp and what household items are safe to use.

You may be surprised to learn that in addition to acetone, you can use citrus fruits like lemon to effectively remove dirt and rust from your bearings.

Read on to learn how to clean skateboard bearings using household items.

Convenience at your fingertips

Camps are so small, but their heavy duty will amaze you. You are responsible for the speed and efficiency of your wheels as they roll over different types of surfaces – some smooth, others shockingly difficult.

However, over time, they begin to accumulate dirt and grime. Therefore, they need regular care to maintain their strength and effectiveness.

Here are the things you need to clean up your dirty camps that you can easily find in the kitchen, garage and other parts of your home.

skate tool

You’ll need this to remove the wheels from your skateboard, but you can also use a socket wrench.

sewing needle

If you can’t find a needle, a paper clip will do, since it’s also small enough to pry open a bearing shield or seal.

acetone

Most people prefer this nail polish remover for loosening and dissolving dirt in bearings. But there are other solutions that have been found to be just as effective, such as 90% isopropyl alcohol, citrus cleaner without water, and pure lemon juice.

hair dryer

You can use this electronic device instead of a can of compressed air to dry bearings.

sewing machine oil

Skate bearing lubricant is the best lubricant for skateboard bearings. However, you can also rely on sewing machine oil or electronic equipment oil as they are light oils.

water mixed with detergent

Clean glass or bottle with lid

Small tray

rags

You can also use lint-free towels or a stack of paper towels to clean and dry.

Rubber gloves to protect your hands (optional)

Step-by-step on how to clean your skateboard bearings

Step 1: Remove wheels from your skateboard trucks

Lay your skateboard sideways on a clean table. Using a skate tool or socket wrench, begin removing the wheels one at a time by loosening the axle nut bolts. Carefully remove the bolts and axle washers and place them on a small tray where you can easily retrieve these small components once you are ready to put the wheels back on.

Cruisin City suggests that you take this opportunity to spin your skateboard’s wheels as well. When reinstalling the wheels after cleaning the bearings, you should put the top right wheel on the bottom left and the top left wheel on the bottom right.

Then you need to put the bottom right wheel to the top left and the bottom left wheel to the top right. This way you can extend the life of your skateboard wheels.

Step 2: Remove the bearings from each wheel

Remember that there are 2 bearings in each wheel, located on either side. You can pry them off one by one with the axle of the truck. Simply insert the axle tip into the bearing and pull it out a little forcefully but gently. You must avoid damaging the bearing’s shield or you will have to buy new bearings.

Step 3: Properly remove shields according to their type

Familiarize yourself with the parts of a bearing to simplify the cleaning process. You will understand which ones you need to treat with more care and which parts you can clean with a stronger solution.

You must also note that there are two types of bearing shields or seals. The older models have metal shields secured with locking rings or snap rings. New models, on the other hand, have rubber or nylon shields.

To remove a metal shield, use a needle and locate one end of the retaining ring between the outer ring and the shield. Hook in and remove the circlip, the shield can now be easily detached from the bearing.

To remove a rubber/nylon protector, you can pry it out of the bearing with a needle or paper clip. However, you must do this carefully, without bending the shield.

When finished, clean the shields with water and dish soap. In the case of metal shields, dry them immediately to avoid rusting. Never place shields in solvents such as acetone as this can damage these delicate parts.

Step 4: Clean your dirty skateboard bearings the right way

With the shields removed and cleaned, it’s time to clean the bearings themselves.

Fill a jar or bottle halfway with acetone. You can also use isopropyl alcohol, citrus cleaner without water, or lemon juice. Just make sure there is no water in the solution you intend to use as this will cause rusting in the bearings.

Now place the bearings in the jar and allow the solution to loosen the dirt and dissolve the grease for at least 5 minutes. Then slowly shake the jar to further clean the bearings before removing them one by one.

Lay the bearings on a clean rag or towel and dry them. Then use a hair dryer or compressed air to make sure there is no residue of the solvent or citrus solution in the bearings. For this reason, many skateboarders prefer acetone to clean bearings. it dries up quickly.

There is another effective and convenient way to clean bearings and that is by using the Bones Bearings Cleaning Unit, which you can buy from Amazon. It consists of a bottle and a metal rod in which bearings are placed alternately with spacers. This way the bearings don’t hit each other when the bottle is shaken.

When it comes to citrus cleaners, you can make this solution at home, but you’ll need to allow time for the preparation. Fill an airtight glass bottle with lemon or orange peel and top up with white vinegar. Leave it for a couple of weeks and it’s ready to use.

Step 5: Lubricate your bearings with the right lubricants

If you don’t have skate bearing lubricant at home, you can use either sewing machine oil or electronic equipment oil. Do not use motor oil, WD-40, petroleum jelly, or cooking oil as these are unsuitable for bearings.

Also, be careful of the amount of oil you put on each bearing. Already 2 – 3 drops on the steel balls are sufficient. Too much oil will cause dirt to quickly build up in the bearing and affect its performance. It can even damage the bearings and steel balls themselves from clogging.

Step 6: Time to put back the bearing shields

If the bearings are properly lubricated, you can now reinstall the shields one at a time. Make sure that the shields remain flat as they can be damaged when bent. Simply push the screen back firmly, including the metal screen retaining rings.

Step 7: Reinstalling the Bearing in Each Wheel

This is easier than removing a bearing from the wheel but using almost a similar technique. Place the bearing on the axle shield side down. Then put the wheel on and push until the bearing is seated in its correct position in the core. Don’t forget the spacer if your wheel uses this between the bearings.

After reinstalling the bearings, back off and tighten the axle nuts along with the washers to further secure the bearings. Spin each wheel to check it out. Then take a ride to redistribute the lube in your bearings. It will take a few minutes for your wheels to accelerate during this “warm up,” but soon your skateboard will feel like new again.

Just in case you’re wondering how often you need to clean your skateboard bearings, I do mine every 2 months or when the wheels are giving me problems due to accumulated dirt. Changing bearings is best when there is too much rust or some of its components like the steel balls are broken.

Conclusion

Does your home feel even friendlier and cozier now that you know it’s always stocked with useful things? Stuff you can even use for skateboard care and maintenance? Feel free to share this knowledge with friends so they know how to clean skateboard bearings using household items. I also appreciate your feedback.

How do I clean my roller skate or skateboard bearings? That’s a question we get a lot! Before we begin, keep in mind that most bearings are generally made from the same materials (and in the same factory). This is how your roller skate bearings fit on your skateboard and inline skates. To maintain the life of your roller skate bearings or skateboard bearings, it is recommended that you clean and lubricate the bearings regularly. Many skaters agree that this should be done after each use to maximize bearing life, durability and speed, but that’s not true if you skate primarily indoors. Clean bearings allow for easy, effortless rolling for a skater of all types and levels.

Most skaters and skate companies recommend avoiding sand, water, or wet conditions when skating. Humid conditions can rust or affect the performance of a bearing, especially in the areas of speed, roll and smoothness of a skate. However, for some skateboarders and outdoor skaters, avoiding dirt and debris is almost impossible. If this is the case, you should clean and oil your bearings more frequently to prevent failure.

Should I clean my bearings or just replace them?

Do you even need to clean those old, nasty bearings? Great question! If the bearings have been neglected, there is not much use in cleaning them. If the dirt is just too bad, or you’ve significantly improved your skating skills, you can simply replace the bearings entirely. Remember, you still need bearing maintenance equipment to service your new bearings.

How to clean skate and skateboard bearings – step by step

Whether you’re new to skating or a seasoned skater, let this article remind you to regularly inspect and clean your bearings. Our Founder, Skip Clinton, a three-time World Figure Skating Champion, says, “Cleaning skate bearings is no difficult task, but giving your skates a little love goes a long way to a great skate life. I’ve been riding on the same bearings for over a decade and I don’t see any new bearings any time soon. That being said, if you haven’t maintained your orientation, you may want to start with a new set and a new attitude toward maintaining it.” There are several methods of cleaning skate bearings, but we’ll share our favorite here. 1. Remove the bearings from the wheels. Make sure you have the right tools for this because using a hammer and chisel could easily ruin your bearings. Be careful not to damage the shield on the race or your bearings will not move properly after cleaning. Next, get ready to use your bearing removal tool. Press the button on top and place the tool on the center of the bearing (the hole that slides onto the skate’s axle, like a donut hole), release the button and pull the bearing straight out of the wheel. This type of removal will not work on bearings in aluminum hub wheels. We recommend using the PowerDyne Bearing Press to avoid damaging the wheel hub. You can remove the outer ring of the bearings to prevent damage if you wish.

Make sure you have the right tools for this because using a hammer and chisel could easily ruin your bearings. Be careful not to damage the shield on the race or your bearings will not move properly after cleaning. Next, get ready to use your bearing removal tool. This type of removal will not work on bearings in aluminum hub wheels. We recommend using the PowerDyne Bearing Press to avoid damaging the wheel hub. You can remove the outer ring of the bearings to prevent damage if you wish. 2. Place the bearings in a glass jar or plastic jug (a plastic milk jug will do). There are several brands of bearing cleaner, but a good brand is Qube Bearing Spa and Bearing Cleaner. You must add enough bearing cleaner to the jar so that all of the bearings are submerged in the chemical. Let the bearings sit overnight. This allows all the dirt and grime in the bearings to dissolve.

There are several brands of bearing cleaner, but a good brand is Qube Bearing Spa and Bearing Cleaner. You must add enough bearing cleaner to the jar so that all of the bearings are submerged in the chemical. Let the bearings sit overnight. This allows all the dirt and grime in the bearings to dissolve. 3. Shake and swirl the container your bearings are in to make sure you get all the dirt out. Drain all dirty chemicals from the jar – replace with a fresh batch of chemicals to cover the bearings like before. Leave for a few minutes and then shake again for a few minutes. Repeat this process several times until your solvent stays mostly clear. This will let you know the bearings are well cleaned. (Side note: if you forgot to clean your undercarriage first along the way, keep a bottle of Bionic’s all-in-one cleaning system in your skate bag. It’s a self-contained unit that will see you through until you’re done can do a more thorough cleaning at home.)

Drain all dirty chemicals from the jar – replace with a fresh batch of chemicals to cover the bearings like before. Leave for a few minutes and then shake again for a few minutes. This will let you know the bearings are well cleaned. (Side note: if you forgot to clean your undercarriage first along the way, keep a bottle of Bionic’s all-in-one cleaning system in your skate bag. It’s a self-contained unit that will see you through until you’re done You can do a more thorough cleaning at home.) 4. Drain the bearings from the solution one last time and place the bearings on a towel or rag to wipe and dry. A great extra step is to blow out the bearings with canned air or an air compressor if you have one – this really cleans them completely. If no compressor is available, you can do it manually (try not to pass out).

A great extra step is to blow out the bearings with canned air or an air compressor if you have one – this really cleans them completely. If no compressor is available, you can do it manually (try not to pass out). 5. When the bearings are completely dry, put a drop or two of a good quality bearing oil on the bearings and leave for a few minutes. Take the bearing in your fingers and rotate each one to evenly distribute the oil to each of the ball bearings inside.

Take the bearing in your fingers and rotate each one to evenly distribute the oil to each of the ball bearings inside. 6. Reinstall the bearings in your wheels and place your wheels on the axles. Be extra careful to avoid damaging the bearing race when reassembling into the wheels. Keep in mind that bearings only need cleaning about every two to three months depending on the environment you skate in. If you mainly skate indoors several times a month but don’t get the surface cleaned often, you may need to polish your bearings once a month. Your performance as a skater can be impacted if you neglect your gear. Take your time and do it right! Feel free to visit our Guide to Roller Skate Bearings page and vote for your favorite bearing brand! We’ve also put together a video that explains how to clean your bearings. The video and the transcript of the video are below!

How to clean skate bearings – video

Video Transcript Hey guys, this is Dan from Devaskation.com. Today we are making a small video on how to clean and properly maintain your bearings. You get much better performance and a much longer lifespan. You can breathe new life into an old bearing set simply by taking it apart and cleaning it thoroughly, then putting it back together. You will be surprised by the results. A few things you want are my favorites, there are a few different brands, but I like the Bones bearing cleaning system. It’s a self-contained bottle that has a post here to hold them all with spacers to keep them separate so it really gets all the dirt out while you clean it. You also want some kind of solvent. Here in the warehouse we use Bionic bearing cleaner. Great, long lasting, it’s a big bottle, with a really good price for it. So these should keep you for years, a bottle of that. So what we have here, I sort of put it all together. There’s one thing I want to mention, there are these shields on these camps. Some people take them off, pry them out somehow. Some people will just clean them. I personally don’t. It is quite difficult to reinstall the end shields and you risk warping the small end shields. There is enough space to clean them. If you wish to take your bearing shields off, you are welcome to do so. But, tell you what, we clean a lot of camps and we’ve never had a problem with not taking the shields off. That’s just a kind of personal opinion. Today I stacked these. So you’re going to see that there’s these little spacers, and you’re going to just slide these bearings onto them. Put a spacer between each bearing. Put another camp there. Then it has this nice little screw right here. This is screwed on top. In order. Now we’ve filled our bottle here with our solvent. We’re just gonna put it in there, let them soak a little. You can soak it, shake it up, Jesse here at the warehouse dancing around to Meghan Trainor, cleaning our warehouses for us, whatever you want. Just give them a good conditioner. You can always pull them out, visually inspect and see that the dirt comes out a little. You will also find that your solvent has become dirty. So just a visual check of sorts, like I said, depending on how dirty your bearings are, how long it’s been since you cleaned them, it may take a little longer. But a pretty quick and easy way to breathe new life into it. Then when we get her out of there, you’ll just dry her off. A paper towel works well. Then just the thinnest bit of oil on each bearing, somehow get it down there under the end shield. Leave it for some time and then reinstall it. You’ll be surprised what kind of performance the new reel you’ll get if you just take those older bearings and clean them. So anyway guys if you have any more questions feel free. You can always email us at [email protected] and have fun!

Recommended bearing maintenance products

The following products are the necessary storage tools and accessories to get the job done right. You will need all 4 of these tools (or a variation) 1. Devastation 3-way tool You will need a tool to remove the wheels from your skates or skateboard. This 3-way tool removes wheels from most ice skates or skateboards. 2. Bankroll Bearing Snatcher This handy bearing snatcher pulls bearings in/out of wheels. It works with most modern bearings but is rated for 8mm. Most modern bearings are 8mm in size. 3. Rollerbones Bearing Cleaner The Rollerbones Bearing Cleaner is a great way to keep your bearings clean. Simply load the bearings onto the stem and let them soak overnight. This product makes bearing cleaning less messy and easy. 4. Bionic Bearing Oil Finally, you need to keep those bearings turning smoothly! Add some Bionic Oil to each bearing and you will feel the difference. The oil also repels water easily and helps prevent rusting.

Products that extend the life of your skate bearings

With the possible exception of high-end bearings, most skate bearings require a little maintenance to keep a skate in its best condition. In order for all bearings to last as long as possible and provide the smoothest rolling, a skater should follow the steps below to service the bearings on their favorite skates. Devaskation offers only the best of these products at the lowest prices! Read on to learn more about the benefits of bearing maintenance. To improve and prolong the life of your skates and their performance, it is recommended to coat the skate bearings with a lubricant. Skating pros recommend using a low viscosity lubricant applied to the bearings. This lubricant maximizes the skate’s acceleration and speed and also reduces friction. Bearing oil should be applied to the bearings after cleaning. All you need is a small drop of quality bearing oil to keep your bearings in top condition for years to come! It is highly recommended to oil the bearings after each cleaning, but it is also important to look out for dry bearings. Skaters should apply lube as soon as there are signs that the bearings are drying out. Bionic Bearing Oil Bionic Bearing Oil is specially formulated to eliminate break-in times while protecting and extending bearing life. This oil can be used on all branded bearings on the market to increase longevity. Perfect to throw in your skate bag for on-the-go maintenance! Bones Speed ​​Cream Extremely popular with skateboarders, Bones Speed ​​Cream has earned a reputation for its proven performance! Bones Speed ​​Cream is great for any skater’s attitude and should be missing from your skate bag.

What kind of bearings should I buy?

The type of bearings you buy will depend on your type of skater. The answer to this question is way too long to go into here, but Devaskation’s Guide to Roller Skate Bearings has many recommendations for quad skate, inline skate, and skateboard bearings.

Types of bearings and maintenance

Skateboard wheels cannot do their duty without the bearings placed inside. Functional skateboard bearings make your skate wheels run smoother and faster.

How long do skateboard bearings last? There are several factors to consider when determining the lifespan of your skateboard bearings. Your bearings can last a year or even longer if properly maintained.

Knowing when to replace skateboard bearings is important because without quality bearings, your skateboard will never perform as it should.

How long do bearings last for skateboard users?

Skateboard bearings, as small as they may seem, play a big part under your board. Your skateboarding routines will determine the lifespan of your skateboard bearings. Good maintenance can also make your bearings last longer.

The average lifespan of skateboard bearings is 1 to 2 years with proper care and maintenance.

Camps also get tired and remember that too much of anything is not good at all. Too much wet, slipping and jumping fast will cause your skateboard bearings to wear out faster. So if you don’t want to change skateboard bearings faster than expected, be careful how you’re going to treat your bearings.

Too much contact with water will rust your bearings, shortening their lifespan. Rusty bearings are never good for your skateboard wheels.

Skateboarding is an extreme sport and most of the time tricks and shows are performed at a breakneck pace. If you enjoy doing takeoff tricks during a ride, you probably need to replace your skateboard bearings more often.

When you slide, your bearings do a lot of work. Too much sliding can also cause your bearings to wear out quickly.

How to extend the life of skateboard bearings

Properly maintaining your skateboard bearings can give them extra years of life.

Pay attention to how to keep your skateboard bearings clean and well maintained. Check them out from time to time, especially if you notice anything unusual. This can protect your bearings from complete and faster wear.

To prevent rust, always clean your skateboard bearings after exposing them to water. If possible, do not use your skateboards in the rain and avoid rolling on wet and damp surfaces.

Do not apply oil to your bearings without first cleaning them. There is no point in putting oil on dirty bearings, as dirt and dust will only block them.

If you want bearings that will last for years, it’s recommended not to buy the lowest priced options in town. But you don’t have to buy the most expensive ones either. It’s a matter of research and asking your veteran friends for the best skateboard bearings they know.

When to Replace Skateboard Bearings

If you have rusty skateboard bearings then they definitely need to be replaced immediately as they will affect the overall functioning of your skateboard. This is one of the most obvious reasons why you need to replace your bearings.

If your bearings’ shields and balls have been lost, you should get new bearings immediately. Skating without these components can lead to accidents.

If you feel unusual things like roughness and stiffness when riding your board, you better check your bearings for possible problems. If cleaning or lubricating doesn’t change anything, it’s time for you to buy a new set of bearings.

The importance of camp maintenance

If skateboard bearings are not well cared for, they will wear out sooner and faster. If you don’t repair your bearings even though you’ve already noticed something unusual about those parts, they will somehow damage your wheels as well.

Skateboard parts are connected to each other. Paying attention to the smallest details of your skateboard can help you spot the problem sooner and prevent bigger problems.

This can save your entire skateboard and give you the opportunity to enjoy your ride with your old but reliable board for the longest time.

Skateboard bearings are not that expensive when bought individually. But if your failed bearings have already caused damage to your wheels, you will have to buy both components together and that can cost you dearly.

Not only will maintenance keep your skateboards from premature wear and tear, it will also save you pennies. Most importantly, it saves you from accidents and serious injuries caused by broken parts of your skateboard.

Conclusion

Responsible skateboarders know how to take good care of their skateboards. Well-functioning boards save you from possible accidents.

This skateboard bearing life article will not only give you an idea of ​​the average lifespan of your bearings; You’ll also get tips and guidelines on how to extend the life of your skateboard bearings. We also mentioned the right time to replace your bearings.

It is important that you know about these things in order to not only extend the life of your bearing but also of your entire skateboard.

Did you find this article helpful? Please don’t hesitate to share this with others. Drive safe boys!

Bearings keep the wheel turning. Put simply, the wheel will go faster when the bearings are lubricated. The main reason for using bearing lubricant is to improve the rotation speed of the wheels by reducing the friction ball. If the ball of friction between the wheel and the road is reduced, a wheel can be used for a longer duration.

If you’re wondering what to lubricate my bearings with, read on to find out what you can and can’t use.

Choice of lubrication for bearings

Relubricating your bearings will help you buy new bearings less often. With proper care, bearings can last for many years.

Grease can be used, although not always recommended, as it contains a thickening agent that contains metal soaps such as aluminum and calcium.

Another possibility is oil. As long as the bearing has oil, its speed will increase. However, oils evaporate; hence they serve less time as fat.

If oil and grease cannot survive, consider using a solid film. However, it should only be used when the other lubricants are not available.

If you are in trouble, you can find a skateboard bearing lubricant alternative at home, such as motor oil or even canola oil, cooking oil or spray. The famous WD-40 is not a lubricant but a solvent; Therefore, it should not be used to lubricate or lubricate moving parts.

Use of solvents as lubricants

When using solvents, the polymers in the bearing can be completely removed, shortening the life of your bearings. Remember that olive oil should not be used as a cooking oil for lager. However, nothing is preferable and far better than using a solvent.

Use of grease as a lubricant

Grease based skateboard bearings have a few differences compared to oil based lubricants.

Because oil is less viscous, it creates less drag and allows the bearings to move faster.

Skateboard grease is a better alternative for those who don’t want to frequently lubricate their wheels and bearings. Bicycle grease and lithium grease are some of the different types of skateboard bearing lubricants that you can use for your skateboard bearings. You can also use molybdenum grease, although it’s a bit overkill.

Clean and lubricate bearings

The cleaner and greasy your bearing is, the better it will spin. In addition to sand and dirt, the roads are also covered with puddles and mud. This affects the rolling action of the bearings.

Properly lubricated bearings ensure your skateboard won’t bind due to bearing friction the next time you want to wake up and skate. Such a mishap can damage your skateboard.

Step 1: Removing the Gaskets

Rubber seals and metal shields are common in skateboard bearings. These seals can be pryed out with a tiny pin or straight clip.

Use a pin to push out the seal by placing the pin between the ball cage and the outer race of the bearing. Aim for the center of the seal as it is made of metal and will not be damaged.

The metal shields are probably secured by a locking ring. To remove the locking ring, insert your pen under one edge of the locking ring and it will pop off. As a result, the metal shield is peeled off.

Step 2: Soak the bearings in a cleaning solution

Place the bearings in a half-filled basin of acetone and let them soak for a minute. If the bearings feel gritty, apply light pressure to the bottom of the bowl while rotating the bearings in the palm of your hand. To dry a bearing, spin it once on a dry paper towel, then place it on a clean towel.

Step 3: Lubricate the gaps

Clean the acetone seals while the bearings dry. Handle the inner metal ring with care; otherwise you could damage it. Apply skateboard bearing grease to the gaps between the balls. Roll the bearing back and forth so all the balls are coated in grease.

Carefully reinstall the gasket. It will fit snugly. Run your greasy finger around the outside of the seal to keep it moist. Apply grease to metal surfaces to protect the metal from corrosion.

How often should you lubricate your bearings

Congratulations! Skateboard bearings have just been cleaned and re-greased. How often should you do this activity? It depends on how often you skate and how often you have to ride in bad weather.

For grease lubricated bearings, try every month and increase the frequency if you skate a lot in wet conditions. Boards that use oil will need servicing about every two weeks if ridden daily. The oil does not offer the same protection against corrosion after a ride in the rain.

Conclusion

To keep your skateboard wheels in top condition, clean and lubricate your skateboard bearings regularly. Camps shouldn’t stop you from showing off your skating skills. In case you need to fix them, read this guide here.

Consider making lots of visits to different stores, going online, making phone calls, and enlisting the help of friends to get skateboard bearing lube.

Lubricate your bearings and make sure they are in good condition. It will be straightforward and you will be ready to skate your board. Next time you ask what I can use to lubricate my bearings, be sure to heed our advice and always come back to this article if needed.

Every skateboarder knows that investing in a good set of bearings can make a huge difference in how a ride performs. But did you know that bearings also need maintenance? Although often overlooked, regular lubrication of your bearings will increase their longevity and most importantly, the safety of riding your skateboard.

With the variety of lubricants available, finding the right one can be difficult. Whether you’re an experienced rider or a beginner skater, lubes play an important role in keeping your bearings at their peak. Get ready to roll and feel the difference with the best skateboard bearing lubricant featured in this review.

Outperform and improve your overall riding experience with these 12 skateboard bearing lubricants!

Best Skateboard Bearing Lubricant Reviews

1. Bones Speed ​​Cream Skate Bearing Lubricant

The Bones Speed ​​Cream is a great product from this brand known for making quality urethane bushings. It’s no surprise that it’s highly rated and popular. This skateboard lubricant is specially formulated to protect against corrosion and reduce friction for a safer, more comfortable riding experience.

What I like most about this synthetic skate bearing lubricant is that it is formulated with low viscosity and can withstand high temperatures. Shortly after applying this solution to my bearings, I immediately noticed how much faster they worked. Don’t be fooled by its size either, this 0.5 liter bottle will last you a while as a little makes a lot!

As dirt, dust, grime and mud builds up on my bearings they just get stiffer and noisier so I’m glad I came across this bearing lube. No doubt it helps increase speed, extends the life of my bearings and keeps my ride smooth. This stuff works like a champ as my bearings feel like new again!

While I’m impressed with its performance, the tip of the reservoir is larger than I would have liked and that made it a bit difficult to apply this lube to each bearing with precision after cleaning. Overall, skateboard bearing lubrication is made effective with the help of this great product. I love how it gives me unparalleled rolling and easy maintenance in the blink of an eye!

Benefits Protects bearings from corrosion and reduces friction

Protects bearings from corrosion and reduces friction. Low viscosity and high temperature resistance

Low viscosity and high temperature resistance. A small amount is enough

A small amount goes a long way Increases speed, extends bearing life and provides a smooth ride

Increases speed, extends bearing life and provides a smooth ride. Keeps bearings looking like new. Disadvantages The large bottle tip makes precise application difficult

Dirt and grit on your bearings can affect the overall performance of your ride. I would recommend this product to anyone who needs an all in one solution for maintaining their bearings. It’s easily the best bearing lube I’ve ever tried.

2. Synthetic lubricant Liberty Oil

Cleaning, protecting and improving the condition of your bearings becomes easy and convenient with this 100% synthetic oil. What sets it apart is its pharmaceutical grade stainless steel needle tip dispenser that allows you to dispense the product with precision. This lube’s patented luer-lock cap also prevents leaks and spills.

This oil is formulated with modifiers that protect and bind metal to reduce wear and friction. In addition, this skateboard bearing oil prevents metal corrosion and can also be used on gears and sliding metal parts. I like that it’s not too thick or too thin and provides excellent lubrication even on plastic and painted surfaces.

Using the needle tip dispenser allows me to easily get into crevices without having to strip or disassemble my bearings. This function alone saves me a lot of time and offers a lot of convenience! The easily squeezable bottle also makes it easy for me to control the amount of oil I fill as I go, making consumption economical.

Some users noticed that the color of the oil is much darker compared to what is advertised, but this in no way affects the product’s performance. When you want to get maximum speed out of your bearings while preventing wear and corrosion, you can count on this 100% synthetic skate bearing lubricant to get the job done. It simply outperforms other skateboard bearing lubricants.

Benefits Comes with a needle tip for easy and precise application

Comes with a needle tip for easy and precise application. Patented luer lock cap prevents leaks and spills

Patented luer lock cap prevents leaks and spills. Formulated with friction modifiers that protect and bind metal

Formulated with friction modifiers that protect and bind metal. Prevents metal corrosion

Prevents metal corrosion. Not too thick or too thin, safe on plastic and painted surfaces

Not too thick or too thin, safe on plastic and painted surfaces. The easily squeezable bottle makes it easy to control the amount of oil dispensed Cons The color of the oil is much darker than advertised

Who doesn’t love a lively rebound? i know i do! If you want to energize your ride without compromising safety, you won’t regret oiling your bearings with this product! It’s arguably the best skateboard bearing lube out there!

3. Ardent 0270-A Roller Bearing Lubricant

Featuring the latest in lubricating technology, Ardent Roller Bearing Lube is another great skateboard bearing lube to consider. It is specifically designed to penetrate deep into ball and roller bearings to completely flush out dirt and debris while providing thorough lubrication. Contact with dirt, grime and debris can seriously affect their lifespan, so I’m glad this product does a great job cleaning it too!

On one application, I immediately noticed a huge difference in the way my bearings slide and perform! It contains no particles that can contribute to noise and performance issues. I also count on it to protect my bearings from corrosion and rust in the long term.

This seems to free the bearings a little more than other bearing lubes I’ve tried, making them run buttery smooth! Also, other lubes tend to leave a sticky and heavy residue on my bearings, so I’m glad this doesn’t do the same. Dispensing just the right amount of product does the trick and prevents lube from building up on the surface of my bearings over time.

Several users commented that it doesn’t come with an application needle. This can be a problem for those who want to use the product to get into tiny crevices and gaps. Otherwise, you can still expect a clean application with its rounded tip. All in all, it’s a multitasking product that’s worth buying again!

Benefits Formulated using the latest lubrication technology

Formulated using the latest lubrication technology Penetrates deep into ball and roller bearings to clean and lubricate them

Penetrates deep into ball and roller bearings to clean and lubricate them. Contains no particles that can cause noise and performance issues

Contains no particles that can cause noise and performance issues. Protects against corrosion and rust

Protects against corrosion and rust. Ensures that the bearings run smoothly

Ensures that the bearings run smoothly. This lubricant leaves no heavy or sticky residue on surfaces. Disadvantages The product does not come with a needle applicator

Considering its benefits, this lube is a great addition to your skateboard maintenance kit. It’s a high performance product that effortlessly makes my 4 year old bearings feel like new! I would recommend it to anyone who wants to improve the performance of their bearings.

4. Tri-Flow Superior Lubricant

If you’re struggling to find a lubricant that gets deep into hard-to-reach parts, your search ends here. The Tri-Flow Superior Lubricant comes in a dropper bottle with a straw, giving you maximum reach and precise coverage. In addition, the high quality mineral oils with which this product is formulated provide optimal lubrication in extreme temperatures and humidity.

Another notable feature of this skateboard bearing lube is its solvents, which efficiently break down dirt, grime, and other contaminants clinging to my bearings and flush them right out. I also don’t have to worry about rust and corrosion as the special additives in this product also repel moisture. With this lubricant in tow, metal-to-metal friction doesn’t stand a chance!

Squeaks and creaks can be annoying and worrying. This light viscosity lube instantly loosened my stuck bearings without the messy buildup. True to its promise, a few drops have maximized the performance of my bearings – they spin smoother and move so much faster now!

Although this lube offers you the best value for money, use it sparingly and with caution as it is loaded with Teflon which is potentially harmful if inhaled and swallowed. Remember to use the product in a well-ventilated area and wash your hands thoroughly after application. Overall it’s a great multi-purpose lube that outperforms the rest.

Benefits Provides you with maximum reach and precise coverage with its straw applicator

Gives you maximum reach and precise coverage with its straw applicator. High-quality mineral oils ensure lubrication under extreme conditions

High quality mineral oils provide lubrication in extreme conditions Decompose and efficiently flush out dirt, grime and other contaminants

Effectively breaks down and flushes out dirt, grime and other contaminants. Special additives repel moisture to prevent rust and corrosion

Special additives repel moisture to prevent rust and corrosion. Reduces friction, allows bearings to spin faster and smoother

Reduces friction, lets bearings spin faster and smoother Best value Cons Loaded with Teflon which can be harmful if inhaled and swallowed

I have also used this lube on door hinges, window cranks and other devices that may need lubrication to move, giving me more bang for the buck. It’s one of the best all-around lubes I’ve tried and I highly recommend getting one too!

5. Displace speed bearing cleaning kit

Before lubricating, your bearings need a thorough cleaning, and the Oust Bearings Speed ​​Clean Kit is just what you need to get the job done right. It comes complete with a storage holder, a wash bucket and a citrus cleaning solvent that is a safe substitute for toxic and unhealthy cleaning solutions. In addition, it is not harmful.

With the help of this kit you can clean your bearings without running the risk of damaging your races or ball cages. It’s also versatile enough to accommodate a wide range of bearing brands, as long as the product is 8mm. What I like most about this kit is the included cleaning solution; It efficiently cleans my bearings without dangerous chemicals and other toxic ingredients.

This kit is well designed and offers you excellent value for money! The bearings stack easily on top of each other, but can still roll to allow you to remove all excess cleaner. It makes bearing maintenance quick and easy without the risk of losing it in the process.

Strong shaking will cause the flush tank lid to leak, so you may need to reinforce it with tape to keep it tight. Otherwise it works as it should and is great for cleaning my bearings. I would recommend it to anyone looking for an effective way to clean their bearings.

Benefits Complete kit with storage holder, wash bucket and cleaning solution

Complete kit with bearing retainer, wash bucket and cleaning solution. No damage to bearings

Non-destructive to bearings The cleaning solvent is non-toxic and efficient

The cleaning solution is non-toxic and efficient. The stockist accommodates a variety of stock brands

The stockist accommodates a wide range of stock brands. Well designed and offers excellent value for money. Disadvantages The lid of the washing tub leaks when shaken vigorously

I have used this product to clean my dirtiest bearings and I am extremely happy with the result. My bearings arrived spotlessly clean and ready for lubrication. It saved me a lot of hassle and time so I never have to worry about how to clean skateboard bearings ever again!

6. Bones skate bearing cleaning unit

Cleaning your skateboard bearings the old fashioned way can be a tedious and time-consuming process, but with the help of this Bones Skate Bearing Cleaning Tool it doesn’t have to be!

The wash bucket is made from high density polyurethane for durability and comes with unique bearing spacers so you can apply the same amount of solvent to each one. This cleaning unit is also compatible with all types of skate bearings, making it a truly versatile product.

I love how this product makes cleaning my bearings less of a hassle! Simply unscrew the wing nut, add your bearings and the spacers, replace the wing nut, pour in your favorite cleaning solution and shake. My bearings come out sparkling clean and ready to go every time!

If you overhaul your bearings every now and then, this cleaning tool is just what you need for a convenient and clean experience. Your bearings will not come into contact with each other due to the included spacers, allowing you to thoroughly clean and rinse each bearing with ease. For this reason alone, I don’t see myself in a position to maintain my bearings with any other cleaning tool.

The only downside is that the kit doesn’t come with a cleaning solution, but the instructions have great cleaning suggestions for you to consider. Overall it works well and makes flushing the bearings a lot easier.

Benefits The wash bucket is made of high density polyurethane for durability

The wash tank is made of high-density polyurethane for durability. Includes spacers that allow even application of solvent to each bearing

Includes spacers that allow for even application of solvent to each bearing. Compatible with all types of skate bearings

Compatible with all types of skate bearings Makes cleaning your bearings a convenient and clean experience Cons Does not come with a cleaning solution

It makes cleaning easy enough to be fun, and the kit will pay for itself over the years if you clean your bearings regularly. Try it and you’ll immediately see what you’re missing. I can’t imagine cleaning my bearings without it!

7. 3-IN-ONE multipurpose oil

After investing in a good bearing set, add a few drops of this multi-purpose oil from 3-IN-ONE for worry-free maintenance. True to its claim, it cleans, protects and lubricates in one!

The Marksman Twist Spout offers ease of use as it helps you dispense product exactly where you need it. More importantly, it’s an effective solution that penetrates deep into rust to loosen nuts and bolts, lubricate moving parts and pivot points, and reduce friction.

Not surprisingly, this brand has been trusted by households and professionals alike for its efficiency and convenience since 1894. Aside from my skateboard bearings, I love how I can use this lube on just about anything around the house like tools, hinges, and joints. I rely on this lubricant to extend the life of my bearings and stop corrosion on their raceways.

This product also gives you complete control over the amount of lube you dispense due to its easy-squeeze bottle design – meaning you no longer have to struggle with rigid containers that dispense too much or too little at a time. It is inexpensive, and if used sparingly, one bottle will do just fine. I highly recommend keeping it handy for every rusty, dirty moving part in your household.

Some users noticed that the smell of this oil is really pungent; You can even spot it without opening the box. It doesn’t bother me as my nose is not very sensitive. For all it’s worth, I see myself buying this product again and again.

Advantages It cleans, protects and lubricates in one operation

It cleans, protects and lubricates in one operation Penetrates deep into rust and lubricates moving parts to reduce friction

Penetrates deep into rust and lubricates moving parts to reduce friction. The Marksman Twist Spout ensures ease of use

Its Marksman Twist Spout offers ease of use Versatile product that prevents corrosion

Versatile product that prevents corrosion. The easy-squeeze bottle design allows you to dose the right amount of product

Easy-to-squeeze bottle design allows you to dose the right amount of product. Cost-effective when used sparingly. Cons The consistency of this lubricant is liquid

This 3-in-1 skateboard bearing oil paved the way for easy and convenient maintenance of my bearings. It achieves what you cannot and simply gives you the best value for money.

8. SONIC Citrus Skate Bearing Cleaner

It’s dangerous to work with toxic cleaners, so I’m glad I came across this Citrus Skate Bearing Cleaner from SONIC. It thoroughly cleans bearings without the use of harmful chemicals and shines with 100% citrus power. In addition, it is not diluted with water, so you don’t have to worry about rusting.

I especially love how this cleaning solution extends the life of my skateboard bearings and keeps them spinning like new! This cleaner effectively breaks down dirt, grime, and other contaminants that slow bearings and contribute to rust and corrosion. This stuff is quick and easy to use.

Typical shop solvents are toxic and can cause skin irritation. This solution is just what you need to keep your warehouses looking pristine without the use of harmful chemicals. You can also use it to refill the Sonic Turbo Wash or any other bearing cleaning system.

Several users reported that this cleaning solution left an oily residue on their bearings, but this can be easily resolved by rinsing them thoroughly and wiping them dry with a lint-free cloth before lubricating. Overall it works exactly as promised and cleans my bearings thoroughly and grit free. I strongly recommend trying it out!

Benefits Thoroughly cleans bearings with 100% citrus power

Thoroughly cleans bearings with 100% citrus power. Undiluted with water to prevent rusting

Undiluted with water to prevent rusting. Effectively breaks down dirt, grime and other contaminants

Effectively breaks down dirt, grime and other contaminants. Fast and easy to use

Quick and easy to use. No harmful chemicals

No Harmful Chemicals Can be used to refill the Sonic Turbo Wash or any other bearing cleaning system. Disadvantages Leaves an oily residue on the bearings

I’m always on the lookout for eco-friendly and non-toxic cleaning products that work efficiently to keep my bearings in tip-top shape, so I’m glad this product didn’t disappoint. I also recommend it to my skater friends!

9. Super Lube synthetic multi-purpose oil

This multi-purpose synthetic oil from Super Lube has been specially formulated for industrial equipment and machinery, so just imagine what it can do for your skateboard bearings! Not only does it provide excellent lubrication, it also significantly reduces rust, friction and corrosion. What sets this lube apart from the rest is that it’s clean, eco-friendly, and food safe.

Everything that squeaks, rolls, pivots and slides doesn’t stand a chance against this lubricant. Unlike traditional oils, this product has a wide operating temperature range, making it suitable for use in harsh weather conditions. Aside from your skateboard bearings and other metal items, you can safely use it on wood, painted surfaces, and on most plastics and rubbers, which I find beneficial.

This lubricant protects my bearings better than oil due to its high viscosity. Regular oil formulas tend to slip off fairly quickly while this one doesn’t, so I know I can count on its thicker consistency for longer-lasting protection – but trust me when I say this lube is extremely smooth nonetheless ! As a result, my bearings roll, slide and perform much better.

While this is one of the best and safest lubes on the market, the nozzle doesn’t offer as much precision as needle applicators. That said, this longboard bearing lube still offers great performance and gives you great value for money. I intend to make this a part of my camp maintenance routine forever!

Benefits Provides excellent lubrication while reducing rust, friction and corrosion

Provides excellent lubrication while reducing rust, friction and corrosion. Clean, eco-friendly and food safe

Clean, eco-friendly and food safe Can be used in harsh weather conditions

Can be used in harsh weather conditions. Can be used safely on wood, painted surfaces and on most plastics and rubbers

Safe to use on wood, painted surfaces and most plastics and rubbers. High viscosity offers extended protection

High viscosity provides long-lasting protection Is extremely smooth Cons The nozzle tip does not offer as much precision when applying

With all these amazing benefits, you can count on this lube to perform as promised. Don’t wait any longer to experience the difference! This breakthrough product is all you need to keep your bearings in peak condition.

10. Liquid Bearing 100% Synthetic Lubricant

My Liquid Bearings 100% Synthetic Lubricant is a staple in my skateboard maintenance kit for a reason. Unlike petroleum based oils and sprays, it has amazing high and low temperature properties which are an absolute necessity for efficient lubrication. The 100% synthetic formula of this product meets all your lubrication, rust prevention and anti-corrosion needs.

Skateboard bearings aside, I have complete confidence in this product to lubricate everything from appliances, door hinges, gears and other sliding parts that become stiff over time.

I am also pleased to know that this lube does not contain PTFE or graphite as well as many other additives. In addition, it is not harmful to plastics, including ABS and polyurethane. You can also use it on painted surfaces without hesitation!

For convenience, the included high-quality ½” and 1½” dispensing needles allow for precise lubrication, ultimately preventing solution overflow. Plus, unlike other formulas, this lube restores freedom of movement without becoming hard or rubbery. My chatty and stiff bearings ride like new again!

Several users mentioned that this lubricant is not odorless as it claims, but this does not affect the product’s performance. If you have lubricated with traditional oils and sprays you will immediately notice the difference this lubricant brings as it is far superior to them. Points of friction don’t stand a chance!

Benefits Amazing high and low temperature properties for efficient lubrication

Amazing high and low temperature properties for efficient lubrication Covers all lubrication, rust prevention and anti-corrosion needs

Covers all lubrication, rust protection and anti-corrosion requirements. Works on hinges and other sliding parts

Works on hinges and other sliding parts. Non-damaging for plastic and painted surfaces, PTFE and graphite-free

Harmless to plastic and painted surfaces, free of PTFE and graphite. Includes high-quality ½ and 1½ dosing needles for precise application

Contains high quality ½ and 1 ½ dispensing needles for precise application Restores free movement without hardening or becoming rubbery Cons Not odorless as advertised

Nothing compares to a noise-free and smooth-flowing ride. Thanks to this great lube, I can enjoy these benefits and more. Grab one now and feel the amazing difference!

11. Park Tool PolyLube 1000 Bike Grease

This Park Tool grease keeps my skateboard bearings lubricating and does everything I could possibly want it to do. This lubricant effectively repels moisture and protects my bearings in the most extreme conditions due to its high shear strength. It also comes in a convenient tube with a nozzle that facilitates precise application and dispensing.

Although made specifically for bikes, this lube is versatile and works perfectly on my skateboard bearings. It applies seamlessly and makes my bearings spin faster in no time! It bonds well to metal and does an excellent job of keeping rust at bay.

Its viscosity is so high that loose bearings are held by this lubricant during assembly; it just doesn’t get any better! This is also convenient to use. It just goes on quickly and easily with no stains and holds up well.

Some users are undecided about the pricing, but it gives you good value for money in the long run. If you are looking to overhaul or service your bearings, look no further. I consider this lube an upgrade from other brands I’ve tried that didn’t meet my expectations.

Benefits Repels moisture and protects bearings in the most extreme conditions

Repels moisture and protects bearings in the most extreme conditions. Comes in a handy tube with a nozzle that facilitates precise application

Comes in a convenient tube with a nozzle that facilitates precise application. Applies seamlessly and speeds up bearing rotation

Applies seamlessly and speeds up bearing rotation. Bonds well to metal and prevents rusting

Bonds well to metal and prevents rusting High viscosity, non-staining, long-lasting grease that spreads well Cons Slightly expensive

This lubricant is right up my alley and it’s worth buying more. Users continue to swear by the effectiveness of this lube, and it’s not hard to see why. This is one of the best purchases I’ve made in a while.

12. Squeaks Gone All Purpose Lube

Stick-slip conditions are known to induce squeaks, so I’m glad I stumbled upon a lube that eliminates noise for good. This all-purpose lubricant from Squeaks Gone provides long-term protection against friction, corrosion and rust while keeping your bearings noise-free. Its non-toxic and harmless formula gets the job done without giving off any harmful fumes.

Although I primarily use this product for my skateboard bearings, I like how I can use it on just about anything around the house that needs lubrication like hinges, bed frames, fans and drawers. Es reduziert die Reibung, indem es sich an Oberflächen bindet und tief in sie eindringt, im Gegensatz zu anderen Lösungsmitteln, die nur eine oberflächliche Abdeckung bieten. Zusätzlich zu diesem erstaunlichen Vorteil zieht es auch keinen Schmutz und Staub an.

Während andere Marken behaupten, die gleichen Eigenschaften zu besitzen, zeichnet sich dieses Produkt dadurch aus, dass es geruchlos, umweltfreundlich und frei von Giftstoffen ist und gleichzeitig eine bessere Leistung bietet. Da es hochwirksam und langlebig ist, ist ein häufiges erneutes Auftragen dieses Gleitmittels nicht erforderlich, was es zu einer kostengünstigen Lösung macht. Es ist auch sicher in der Nähe von Kindern und Haustieren, sodass Sie es risikofrei kaufen können!

Der einzige offensichtliche Nachteil dieses Produkts ist seine Fähigkeit, Kleidung und Teppiche zu beflecken. Ansonsten denke ich, dass es so gut wie das beste Öl für Skateboardlager ist und eine hervorragende Alternative zu giftigen Schmiermittelformulierungen darstellt. Machen Sie dieses Schmiermittel zu einem festen Bestandteil Ihrer Wartungsroutine; You will not regret it!

Vorteile Bietet langfristigen Schutz vor Reibung, Korrosion, Rost und stoppt Quietschen

Bietet langfristigen Schutz vor Reibung, Korrosion, Rost und stoppt Quietschen. Seine ungiftige Formel erledigt die Arbeit, ohne schädliche Dämpfe abzugeben

Seine ungiftige Formel erledigt die Arbeit, ohne schädliche Dämpfe abzugeben. Allzweck-Schmiermittel

Allzweckschmierstoff Geruchlos, umweltfreundlich und kostengünstig

Geruchlos, umweltfreundlich und kosteneffizient Zieht weder Schmutz noch Staub an

Zieht weder Schmutz noch Staub an Sicher in der Nähe von Kindern und Haustieren Nachteile Kann Kleidung und Teppiche verschmutzen

Meine Lager haben viel durchgemacht, sind aber immer noch so reaktionsschnell wie an dem Tag, an dem ich sie gekauft habe, alles dank dieses großartigen Schmiermittels. Jetzt kann ich glatte und geräuschfreie Fahrten genießen, ohne zu viel ausgeben zu müssen. Es ist ein zertifiziertes Must-Have und eine der besten Wartungslösungen, auf die Sie nicht verzichten können!

Worauf Sie beim Kauf von Schmiermitteln für Skateboard-Lager achten sollten

Die Wahl des richtigen Schmiermittels zur Wartung Ihrer Lager kann schwierig sein, da Ihnen unzählige Optionen und Alternativen zur Verfügung stehen. Das Fahren setzt Ihre Lager Wasser, extremer Hitze und Feuchtigkeit aus, die sie mit der Zeit beschädigen können. Sie in Topform zu halten, ist nicht verhandelbar und entscheidend für Ihre Sicherheit und ihre optimale Leistung.

Beim Kauf eines Schmiermittels ist es wichtig, auf die Vorteile zu achten, die es zu bieten hat. Die Art des Schmiermittels, seine Viskosität und die für eine effiziente Schmierung erforderliche Menge sind von gleicher Bedeutung. Berücksichtigen Sie andere kritische Faktoren wie die Fähigkeit, Rost zu widerstehen, Korrosion und Reibung zu verhindern. Diese Schmiermittel halten in der Regel länger und arbeiten effizienter, sodass Sie auf lange Sicht mehr Wert für Ihr Geld haben.

Andere wichtige zu berücksichtigende Faktoren

Wenn Sie schon dabei sind, möchten Sie vielleicht auch seine Eigenschaften und Formulierung berücksichtigen. Es ist immer eine gute Idee, sich für Schmiermittel zu entscheiden, die nicht abrasiv, ungiftig und für die Überholung Ihrer Lager geeignet sind. Der Komfort, den sie für eine einfache Anwendung bieten, kommt gleich an zweiter Stelle. Ein Nadel- oder Strohhalm-Applikator erledigt die Arbeit im Allgemeinen präziser.

Denken Sie daran, dass das regelmäßige Reinigen und Schmieren Ihrer Lager eine zuverlässige und dennoch kostengünstige Lösung erfordert. Vergeben Sie Pluspunkte für Produkte mit Multitasking-Vorteilen, die Sie zu Hause oder unterwegs griffbereit haben. Das Finden einer nachhaltigen Schmierroutine ist entscheidend für die Gesamtleistung und Sicherheit Ihres Skateboards.

Was ist Schmiermittel für Skateboardlager? How does it work?

Schmiermittel dienen in erster Linie zum Reinigen, Schützen und Schmieren Ihrer Skateboardlager. Bei regelmäßiger und ausreichender Anwendung eliminiert ein Schmiermittel die Reibung und sorgt dafür, dass Ihre Lager ohne Behinderung schneller arbeiten. Es kann auch Feuchtigkeit abweisen, um Rost und Korrosion zu verhindern, und bildet eine Barriere gegen Schmutz, Schmutz und andere Verunreinigungen, die die Leistung Ihrer Lager beeinträchtigen.

Was sind die verschiedenen Arten von Schmiermitteln für Skateboardlager?

Öl – Diese Art von Schmiermittel wird häufig verwendet und kann entweder auf Erdölbasis oder synthetisch sein. Synthetische Öle werden von den meisten zum Schmieren von Skateboardlagern wegen ihrer Fähigkeit, bei hohen oder niedrigen Temperaturen und anderen extremen Bedingungen zu funktionieren, bevorzugt. Sie schmieren effizient und weisen gleichzeitig Wasser und Feuchtigkeit ab, um zu verhindern, dass sich Rost festsetzt und Korrosion verheerende Schäden anrichtet.

Fett – Schmierfette können entweder eine feste oder halbflüssige Konsistenz haben. Beachten Sie, dass Fett während der Fahrt aufgrund der Wärme, die Sie während der Bewegung erzeugen, flüssiger und weicher wird. While grease lubricants tend to attract dust and dirt, you can expect this formula to stay on longer than oil lubricants.

Dry Lubricants – This type of lubricant has a waxy consistency that goes on wet and dries on contact. It’s a fast and easy alternative for use in between deep cleaning and lubrication sessions. Although it requires frequent application, it stays on longer compared to its counterparts.

Why do you need skateboard bearing lube?

Keeping your bearings clean and well-lubricated is critical to the overall performance and safety of your board. To keep your bearings in top shape, lubricants prevent general wear and tear by reducing friction between surfaces. They also guard against rust and corrosion and eliminate dirt, dust, and other contaminants that may be detrimental to the performance of your bearings.

What’s more, the right lubricant can withstand extreme temperatures and dissipate excess heat to prolong the life and enhance the performance of your bearings. Using a lubricant for your skateboard bearings is the most efficient and cost-effective way of maintaining them. It’s a must-have for professional and novice riders alike!

frequently asked Questions

What are the most trusted skateboard bearing lubricant brands?

Some of the most trusted brands are Bones, Liberty Oil, Ardent, Tri-Flow, 3-In-One, and Super Lube. These brands are widely used and known for their superior quality, efficiency, and great pricing. You’ll immediately feel the difference in the way your bearings perform.

What can you use to lubricate skateboard bearings?

Aside from readily available lubricant preparations, there are skateboard bearing lubricant alternatives that riders on a tight budget can consider using for the upkeep and maintenance of their bearings. Coconut oil for skateboard bearings is a popular option that some riders turn to. Cooking oil and motor oil for skateboard bearings are among the options too.

How to lubricate skateboard bearings?

After cleaning your bearings thoroughly and drying them, add a drop or two of your lubricant on the bearings and let it sit for a few minutes. Pick up and spin each bearing to distribute the lubricant evenly to each of the ball-bearings inside. Carefully reinstall the bearings in your wheels and place them on the axles.

Can you use olive oil as lube for bearings?

Although olive oil makes an acceptable substitute in the absence of oil or grease lubricants, it goes rancid and can gum up your bearings so it would be best to give it a hard pass. Stick to products that are specially designed for lubricating skateboard bearings for optimum performance and safety. White lithium grease for skateboard bearings is another cost-efficient alternative to consider.

Is it OK to use wd40 on skateboard bearings?

Although WD40 is effective in combating rust, using silicone lubricant for skateboard bearings is one of the best ways to go. WD40 does not contain oil of adequately high viscosity to provide lubrication for skateboard bearings, and this can defeat the purpose of utilizing it. Lubricants do a better job at reducing friction on contact points and preventing corrosion.

Where can I buy?

Skateboard bearing lubricants are widely available for purchase on Amazon, websites that carry skateboarding gear and equipment as well as hardware stores. Make sure you are buying from a reliable source to ensure their efficiency and authenticity. Using substandard lubricants may potentially damage your bearings, compromising your safety.

Conclusion

High-quality lubricants can dramatically improve the overall performance of your skateboard. Checking out reviews online, soliciting the opinion of experienced riders, and following instructions to the letter is highly advisable.

Bearings may be one of the smallest parts of your skateboard and may seem negligible, but they play a vital role in the stability and speed of your board. Aside from good manufacturing, they require regular upkeep and maintenance for added durability and longevity. Because lubricants differ in terms of benefits, pick the one that specifically addresses your riding and maintenance needs.

Finding the best lubricant for skateboard bearings, as simple as it may sound, involves research and a great deal of patience. I hope you found these reviews helpful. After all, knowing exactly what lubricant to get is a liberating experience!

3. Remove shields

Use the knife blade or whatever you have to remove the rubber protection. Be careful not to bend the shield when removing it!!!

Some rubber lined bearings (“RS” type) have a tiny gap between the shield and the inner race – use this gap if you can to remove the shield as it is much less likely to damage it. You should be able to slide the very tip of your knife to pry the shield off the inner ring – once it’s free of the inner ring it just pops off.

If you have high quality bearings like Bones L2 bearings, Bronson G3 bearings, or Saber Built In Race bearings, chances are your bearings have Labyrinth Shields (“RU”). These are a bit more difficult to remove – again start from the inner race, use the point of the knife and be very, very careful not to puncture or bend the shield. If your labyrinth camps have two shields per camp, consider simply taking off the inner and leaving the outer alone. Labyrinth bearings are much better sealed anyway, so they require far less cleaning.

B12 Chemtool is about the best degreaser I’ve found for use with bearings. It doesn’t leave a film to interfere with the adhesion of the lubricant to the bearing surface and it cleans old caked grease like no other. It is available in both liquid and aerosol versions. The liquid can be used for soaking, and the aerosol can be used to get into places that cannot be reached without disassembly.

And whatever you do, DO NOT use compressed air to clean your bearings. If you exceed the bearing’s rotation rate by rotating it with the air (funny as it is, LOL) you will face death and/or dismemberment of the disk as the bearing flies apart/explodes.

question

How do I remove the bearings from a skateboard?

George Higgins Community Answer

You must first screw the wheels and bearings together. Once your wheels are out, you need to take the actual bearings out of them. You can usually pry them out with a screwdriver. If that doesn’t work, try the first tip for Step 4 and alternately apply pressure to opposite sides of the wheel with your thumbs. You should hear it squeak when it comes out if the bearing is very tight in the wheel.

Sometimes we forget that a skateboard isn’t an off-road vehicle and skate through some pretty questionable things. It’s all part of the fun of cruising down the boardwalk, bombing crisp downtown hills, and skating at your favorite dusty skate park. Somewhere down the line, however, you’ll find that your wheels could use a cleaning. You have some gum, grease, dirt or worse, someone hasn’t picked up their dog. Maybe you got a little too excited and went through a patch of mud either way, since skateboards are very sensitive to water and are naturally exposed to the dirt of the streets, the task of cleaning your wheels is harder than you think.

That’s because our wheels have literally seen it all. From oil stains, wet paint, wax, dirt, gravel to anything the city streets and dusty skate park can conjure up. Our bikes keep turning, keeping us on our boards and having fun. So it’s only right to show them some love. With porous surfaces and their proximity to water-sensitive bearings, we can’t, so to speak, throw our wheels in the dishwasher (although we will use dish soap). We need some attention to detail and a little elbow grease.

Of course we want to avoid the things that get our wheels dirty if we can, but skaters will skate first and ask questions later. First things first: you’ll need a bucket of water and/or access to a sink. Second, if you do it right, be prepared to get wet. No matter what you’ve been through, you can clean your skateboard wheels in 6 easy steps. We’ve covered everything you need to get started and even some tips for keeping your wheels fresh as you progress.

Let’s keep the party going, shall we?

What you need to get started:

A flat surface (table, floor, or counter)

sink / bucket of water

Skate tool or wrench for removing wheels

cleaning rags

wire brush

your skateboard

detergent

A towel to keep the area clean (optional)

Separate bin for wheels (optional)

Separate container for storage (optional)

Paper towels (always a good idea)

When should you clean your wheels?

There are some pretty obvious indicators and some not-so-obvious clues as to when it’s time to clean your wheels. More often than not, you’ll hop on your board and start riding when you suddenly realize something is wrong. Maybe you have a gum stain that’s causing your ride to wobble and clunk, or maybe your wheels are feeling soft and oily causing you to lose grip on the skate park cement. No matter how dirty they’ve gotten, you’ll pretty much know when they need cleaning because your ride won’t be smooth. Otherwise you might just enjoy the look of fresh wheels. Anyway, here are some tried-and-true tips that skateboarders have been using for years to keep their wheels clean before they get to the point of mandatory cleaning.

Brick is your best friend: Drag your skateboard wheels diagonally and criss-cross over Brick to scrape off dirt and waxy grime.

Bomb a Hill: When you skate fast, your wheels heat up and help shed any dirt. Try to find a gravel hill that isn’t too steep for a sandpaper-like effect. Be sure!

Avoid the Dirt: See a puddle? Sand pit or oil grease? Jump off your board and save your wheels from trouble.

Make sure you don’t feel any flat spots. In this case, you usually need new wheels to avoid the bumpy ride.

Spin your wheels! Just like cars, your board can benefit from changing things up.

Now that you’ve learned a few tricks of the trade and have everything you need to get started, you’re ready to learn how to clean your skateboard wheels.

Step 1: Secure your workstation

Cleaning anything means getting dirty, but this is especially true for something like a skateboard that spends most of its time on dirty cement. Secure your workspace in the right area so you don’t create unnecessary chaos. This generally means a flat surface with plenty of room to move things around. We’re going to remove the wheels and bearings entirely, so you’ll need a place where they can’t get lost. There’s also everything included in the list above coupled with either a sink for water access or a bucket of water. All in all, there is a high probability that you and the surrounding area will get quite wet. Lay out a towel to keep the area clean, or work outside or over the sink to avoid making a mess. Also remember that we want to avoid getting your board’s wood deck and bearings wet at all costs. The right preparation makes the difference.

Step 2: Remove the wheels and bearings

Here comes the technical part of cleaning your wheels. Grab your skateboard, skate tool or socket wrench and proceed to take off your wheels. You do this by loosening each bolt on your truck’s axle. Once your bolt is loose on a specific wheel, position your truck’s axle at a 45-degree angle in the mouth of the bearing to create a crowbar-like effect to pry the bearings out. Remember that there are two bearings for each wheel and place them in a safe place. You might also want to clean your bearings at this point (highly recommended). Be sure to remove each wheel and its bearings so your four wheels are ready for cleaning. Remember to place your bearings in a safe place or container to avoid getting them wet at all costs.

Step 2B: Clean Bearings (Optional)

Excuse the sneaky 2B, but we wanted to give you every possible option to clean your wheels and enjoy a faster, smoother ride. We’ve added the option to clean your bearings here because cleaning your wheels will have to take you out anyway. When you take your bearings out, at least put them in a cup of isopropyl alcohol while you clean your wheels. Even if you do, your bearings will be dramatically improved for a faster, smoother ride. For a complete guide to cleaning your skateboard bearings check out our quick and easy guide here. Either way, no pressure.

Step 3: Soak your wheels in soapy water

Hopefully you have a bucket or sink to make things easier. Worst-case scenario, you could run them without a hose or faucet, but remember it gets pretty messy. Soaking your wheels in a bucket or clogged sink with some dish soap while you take each one off and remove the bearings can get things rolling while you work. Make sure the bearings are out of the wheels so the soap can start dissolving the dirt that’s lodged in the bearing beds. While we knew there was a ton of dirt in the wheel track that touches the ground, the most damaging dirt and debris is actually hiding inside the wheels. After soaking, be sure to use a cloth, rag, or paper towel to thoroughly clean them. Once we have the inside clean, we can move on to the wheel track and the sides of the wheel. Your skateboard wheels should be soaked to the point where we can scrape the dirt off the wheel track fairly easily. That brings us to our next, most important step.

Step 4: Wire brush removes the gunk

A wire brush isn’t easy to find, but usually a local hardware store or even most dollar stores will have some type of wire brush. We also linked this wire brush from Amazon.com, but if you want to go the extra skate rat route, use an old toothbrush or leftover griptape. This crucial step is as easy as it sounds with a little attention to detail. Run your wheels under hot water to loosen dirt on the wheel track and continue using the brush to scrape embedded debris. After soaking your wheels for a while, the dirt should come off a little easier. That being said, you’ll probably still need to add dawn dishwashing liquid in certain spots, but make sure that once we’ve got our wheels sparkling clean, it’s imperative that you do your best to wash away any soapy residue. We don’t want anything on our bikes, but most of all we want soap that can leave dodgy chemicals or stickiness. Once you are happy with the clean look of your wheels it is time for one crucial step 5.

Step 5: Dry Your Skateboard Wheels

Drying your wheels is a very important part of the cleaning process. Wheels are porous and not only do they attract a lot more dirt and grime when wet, they can even negatively affect the smoothness of your ride. Care should also be taken to ensure your wheels are completely dry before inserting your bearings and securing the wheels to the board prematurely (step 6). Water will destroy your bearings with rust and drench your deck with soaking. If anything, that’s exactly why we created this guide. Insufficient skaters can actually ruin their boards trying to clean their wheels. It’s best to use a rag or set of paper towels to dry your wheels separately, then leave them out in the sun for several hours. If you put them on too soon, your wheels will feel heavier than normal and seem to move slower and stickier (in a bad way) to the ground.

Step 6: Reassemble your wheels and board

Congratulations! You’re almost done cleaning your skateboard wheels, but we’re not out of the skate park yet. Assembling your board offers a unique opportunity to spin your wheels. Some skaters who ride a ton of fakie or change stances will find that their guide wheels have started to tilt or curve. If your wheels are particularly old and weathered in this regard, you may have no choice but to leave them as they are to avoid skewing. Otherwise, just like on a vehicle, spinning your wheels can extend their life and smoothness. Hopefully you’ve also followed our camps guide so you’re ready to put your clean camps back in their beds. From there, reassemble your board by reversing step 2. Once your board is complete, you’ll be amazed at the cleanliness of your skateboard wheels. After all your hard work, you deserve some fun. Call up your skate buddies and head to your favorite skate park or run and enjoy your freshly cleaned wheels!

Keep going: How to Clean Skateboard Bearings

If your cruiser just isn’t going as fast as it used to, it’s probably your bearings. As one of the most precision components on your skateboard, bearings can have a drastic impact on the speed and performance of your ride. Unfortunately, dirt and grime naturally accumulate in your skate bearings, causing them to slow down over time. Depending on how often you skate, a bearing cleaning every 4-8 months may be appropriate.

Fortunately, bearings can be removed, disassembled, and re-greased with relative ease. Not only does this bring their original speed back, but it also helps them last much longer. Cleaning your skateboard bearings also saves you money because you don’t have to buy new bearings as often.

This Cruisin City guide explains the step-by-step process of cleaning skateboard/cruiser bearings, plus a few “expert” tips to make the process easier!

What you will need:

– Solvents without water (acetone or carburetor cleaner)

– Bearing lubricant for skateboards

– Skate tool or 5/16” (8mm) socket wrench/socket

– sewing needle or similar

– Clean the bottle or glass

– Generic dish soap + water

– Paper towel or rag

– pen (optional)

Step 1: Remove bearings from wheels

Before you start removing your wheels, now is also a good time to spin your wheels. This isn’t required, but certain wheels will of course experience more/less wear than the others and a spin will help them last longer. A wheel spin means that the bottom left wheel is placed on the top right, the bottom right wheel is placed on the top left, and so on.

A simple trick to make this easier is to use a pen and write the initials of where to place the wheel at the end of the spin/clean before you start removing. For example, write “TR” (Top Right) on the bottom left wheel. Then, when you reassemble the wheels, you’ll know exactly where to turn each wheel. The pen ink will just wear off the wheels after a few minutes of skating.

First loosen the axle nuts with a skate tool or 5/16 inch socket wrench. Be careful not to slide the tool into the outer shield of the bearing as this may damage the shield. Once unscrewed, remove the wheel from the axle, paying attention to the axle washers that may be between the nut and the bearing. Set aside these small washers to put back on when reassembling.

Now you need to pry the bearings out of each wheel.

This move will require some strength, so don’t be afraid to use some muscle power. Place a bearing directly over the top of a truck axle. With only one bearing over the axle, carefully rotate the wheel sideways (see photo below) and pull the bearing out of the wheel.

Repeat this process for all bearings.

Step 2: Remove bearing shields

While the last step required some strength, the next step requires careful precision. When removing end shields, care must be taken not to bend the shields, especially if you have rubber/nylon end shields. If you have camps with shields on both sides, it’s best if you can remove both sides.

There are different types of bearing shields:

Metal shielded bearings are an older style and generally have a C-ring locking mechanism. Just use a needle to find one of the ends of the C-ring along the outside edge of the bearing. Pry under the ring with a needle to remove the C-ring and the shield should then fall out (or pry) freely.

For bearings with rubber/nylon shields, start on the inside of the shield and carefully place the needle under the shield (see photo below). Carefully pry the bearing up and around the bearing, being careful not to bend it too far out of shape. The shield should remain flat throughout the process, not pulling up in one spot.

Once all of the shields are off, they should be placed in a bowl of warm water and dish soap.

Do not soak shields in acetone/solvent. Solvents dry out and destroy the rubber/nylon compound of the shields that help keep dirt out. Simply rub off the dirt with your fingers and grease with soapy water. Be careful not to bend the shields.

Do the same for metal shields, just be sure to dry them immediately to avoid rusting.

Step 3: Clean Your Skateboard Bearings

The moment you’ve been waiting for to get all the dirt and grime out of your skate bearings! There are two ways to do this:

The Easy Way: With all the shields removed you can now see the steel balls arranged in a plastic cage inside. The bearing is now open and can be effectively cleaned. Please note that your bearings (except the shields) do not come into contact with water. Use a jar or bottle and fill it halfway with solvent. Drop the bearings into the bottle filled with solvent. Now you want to gently shake or stir the bearings in the solvent so the solvent moves through the bearings and flushes the dirt and debris out of them. In the photo below is a Bones Bearing Cleaning Unit bottle into which the bearings can be placed and then shaken to flush the solvent through them. This bottle is not necessary, but extremely helpful. Without them, just put the bearings in a jar, let them sit in the solvent, and shake a little to get rid of any dirt. Finally, remove the bearings from the solvent and allow them to dry on a paper towel or rag.

The hard way: This method is really only recommended if your bearings are completely covered in dirt/grime, have rolling issues and you already have experience cleaning bearings. Follow the same steps as above but remove the plastic/nylon cover holding each of the small steel balls in place. To do this, very carefully push the nylon cage away from the steel balls (do not pry). The balls should stay in place as they are locked into an inner and outer race in the bearing races. After pushing out the cage you should now be able to line up the balls on one side of the bearing and they should then fall out. The bearing is now completely disassembled. Place all components in the solvent to clean them.

Now reinstall the balls by inserting them into the outer bearing race with them aligned in a “C” shape on one side. Now place the inner race in the center and align the balls back up into the races/grooves. Carefully place the plastic cage over the balls and line up each ball. Press down evenly to push each steel ball back into place in the cage. This process can be time consuming and tedious, but the result is that your bearings will be as clean as they came from the factory!

Step 4: Lubricate and reinstall bearing shields

With your bearings looking new again and the shields cleaned/dried, it’s almost time to put them back together.

The next step is crucial. You will need to apply skateboard bearing lube to the bearings. Without lube, the bearings can spin insanely fast for a few minutes, but they will eventually heat up and be permanently destroyed. If you skate downhill without lubricated bearings, they can actually seize up and cause a bad accident. It is highly recommended to only use a skateboard bearing specific lubricant as generic lubricants do not have the correct viscosity for skateboard bearings.

Apply two to three small drops to the steel balls in the bearings. Do not cover the bearings with grease as this will cause a lot of mess and will attract dirt to the bearings while skating.

After applying lubricant, gently press each end shield back onto each bearing. Again, be careful not to bend the shields.

Step 5: Reinstalling the Bearings in the Wheels

One last step before you’re ready to skate! There are several ways to press each bearing back into your wheels. One of the easiest ways is to place a bearing (shield side down) on your truck axle and then place the wheel over the axle and onto the bearing.

Press down evenly on the wheel and the bearing underneath should snap into the wheel. Repeat this process for all bearings. Then, when you unscrew the axle nut, you can tighten it until the bearings are fully pressed in.

Remember to install axle washers between the bearing and axle nut before tightening the nut. Be careful not to damage the bearing shields with your tool.

Finally, it took some work, but your skateboard bearings are now spinning and looking like new again! You’re probably looking forward to skating, but don’t be surprised if your board isn’t super fast on the first push off.

The bearings now have fresh lubricant, which still has to be distributed in the bearing. After about 10-15 minutes you should feel the bearings start to break in and skate faster. A fun way to break them in is by skating a bowl or riding down a hill!

Final Note: If you find that the plastic/nylon cage in your bearing(s) is broken or your bearings are rusted on the inside, it’s time to get new bearings. Then take a look at our selection of high-quality skateboard bearings in the Cruisin City online shop!

Text and photos by Skatetexter

Maintenance of your Bones® bearings

Follow these steps to get the best performance.

Congratulations on purchasing a set of Bones ® Bearings, recognized worldwide as the finest skateboard bearing brand available. All Bones® bearings are Skate Rated™ to our precise “tolerances” to give you the absolute maximum speed and life possible, not “ABEC” rated like bearings designed for service in engines or regular machinery. The superior quality of Bones® races, made from chrome bearing steel with their highly polished “super finish”, removable non-contact rubber shields, precision-molded high-speed ball cages and Bones Speed ​​Cream® lubricant ensure unrivaled running and easy maintenance. So carefully install them in your wheels and you’re good to go.

Keep them clean

Exploded view of the bearing

Your new Bones® bearings are the most precisely manufactured part on your skateboard, with clearances and tolerances significantly less than 1/1000th of an inch. That means a single hair is thicker than the clearance between the balls and the races in the bearing, and a hair will clog it and slow you down. Because outside you skate through dust, sand, water, mud, etc.; Your bearings will eventually get dirty and/or wet. If they are dirty you will find that they do not spin freely when you move the wheel and you may also find that they get noisy. At this point you have two choices: clean your bearings or replace them.

WARNING! Don’t use bearings that don’t spin freely on your skateboard. If you continue to ride heavily soiled or unlubricated bearings, you run the risk of permanently damaging them and/or yourself. Dirt in your bearings causes pitting on your balls and races, increases friction, causes extra heat and can eventually cause the bearing to “freeze” or stop rolling. If this happens to your bearings, the skateboard will stop abruptly, causing you to fall and injure yourself. So keep them clean, dry and lubricated with Speed ​​Cream.

Maintenance instructions – video

Keep your bearings dirt free, moisture free and lubricated. Water will rust your bearings and dirt will destroy the smoothness of the super finish on your bearing races and increase friction. Clean your bearings when they’re dirty or noisy with the most eco-friendly cleaner you can find, designed to dissolve oil, grease and remove grime from steel, plastic and rubber surfaces. We have tried many cleaners and solvents and many of them are safe to use. Citrus-based cleaners can work, but they tend to leave a slight residue. Solvents are dangerous to use, but often offer a better solution for cleaning heavily soiled bearings. If you use a water-based cleaner like citrus cleaner or detergent, be sure to dry your bearings IMMEDIATELY and then recoat with lube to prevent rusting. Some solvents/commercial products we’ve used are: pure or nearly pure isopropyl alcohol (the kind typically found in markets is only 10% pure and doesn’t cut fat well.); Gumout® carburetor cleaner (available at auto parts stores); Acetone (available at hardware stores). If you cannot find any of these solvents such as acetone or pure alcohol you can use paint thinner or lacquer thinner but these cleaners are oil based and can leave an oily residue on the internal surfaces of your bearings. If using a solvent cleaner, please wear suitable rubber gloves and work in a safe, well-ventilated area. When you are finished, please remember to dispose of your solvent in a safe and environmentally responsible manner. Do not pour oil into dirty bearings. It does not clean the bearing, but merely flushes the existing dirt further into the bearing. It may initially seem like they’re rolling faster, but in reality you’re just spreading the dirt and it will still be there to ruin your bearings’ high-precision rolling surfaces. Clean your bearings before re-lubricating them.

cleaning instructions

Using a pin or the edge of a small knife, carefully remove the non-contact rubber shield by prying up the shield from under the shield on the inner ring. It should pop up and out quite easily, so handle it carefully and don’t bend it or cut the seal. If you have the maze shield bearings, be sure to remove both. Be careful not to bend or tear the shield when removing. Bent shields will not fit properly and can allow contaminants into the bearing. Do not use solvents to clean the rubber shields! This can cause the rubber to blister or swell from the solvents. Simply wipe the rubber shields with warm, soapy water and a lint-free cloth. Make sure the shields are completely clean and dry before reattaching. Optional Cage Removal: You can clean your bearings more thoroughly by removing the ball cage or “cage”. We only recommend this if you use the Bones® bearing cleaner or are an experienced bearing cleaner. To remove the ball cage, take a straightened paper clip or similar object and insert it into the gaps between the ball seats, then push the ball cage out. Alternating pushing in several places is often helpful. We recommend ONLY pushing the mounts out. If you pry them out, you will damage the balls’ cavities and ruin the finish of that cavity. At a minimum, this will result in more vibration and a slower bearing, and at worst, failure of the entire bearing. If you remove the cage, the balls can all shift to one side and in some cases fall out of the rings entirely. The Bones® Bearing Cleaner isolates each bearing with spacers so there is less chance of the balls all coming together on one side of the bearing and then falling out of the races. However, this is somewhat common in bearing cleaning and does not mean the bearing is broken, just 100% disassembled! If your balls fall out of the races, you’ll have to reassemble the bearing from scratch. It’s easy and that’s how the bearings were assembled in the first place, so don’t panic. You need a soft surface like a folded towel. Take the outer ring and the 7 balls and place them on the towel. Make sure all bearings are on one side like a crescent moon. Press on the side of the outer ring where all the balls are. Angle the inner race so that the raceway of the inner race aligns with the balls and pull toward the center of the outer race. It will probably take a few tries, but you’ll get there. Clean your bearings and your ball cages: Once you’ve decided to remove them, submerge them in your cleaning solution in a polyethylene, polypropylene, or metal container. (We don’t recommend glass as it’s easy to break, but be aware that some plastics can melt in some solvents, so be sure to use one that you know is safe.) Carry suitable rubber gloves and eye protection. Gently shake the jar to flush the solution through the bearing. Continue replacing the dirty solution with clean solution until the solution stops changing color and you are satisfied with the smoothness of the bearing roll. If you have the Bones® bearing cleaning device, please return to the instructions in the bottle. Dry your bearings: Remove the bearings and ball cages from the cleaning solution and dry them immediately. We recommend a can of compressed air to ensure that dirt, grease, solvents, detergents, etc. have left the inner workings of the bearing and no water is left behind. Be careful when doing this to avoid getting the cleaning products in your eyes or anywhere other than a cloth on your work area. Reinstall your cages: if you removed the ball retainers, use the paperclip to evenly distribute the balls, then insert the ball retainer so each ball is over a ball seat. Then gently snap the ball mounts back into place. Once you’ve installed all of the brackets back into your bearings, check each bearing to make sure it spins freely. If not, repeat your cleaning cycle or replace the bearing. Lubricate your bearings: We recommend 2 drops of Bones® Speed ​​Cream® per bearing for steel ball bearings. Only one drop per bearing is required for Bones® Swiss Ceramic Bearings. Don’t be tempted to use your bearings without lube as they “spin faster without lube”. While this is partially true on the surface, running your bearings without lube means they can quickly fail and ‘freeze’, which is NOT supposed to happen when skating! Reinstall your clean rubber shields: Lay each flat on the “open side” of a clean bearing where the balls are visible. Make sure the Bones® name on the shield is facing outward, then gently press the rubber shields into place with your thumb and a rolling motion. Inspect the ring around the inner ring and make sure there are no indentations in the rubber protector. If so, run your thumb over it to smooth it out. If you have Bones® Labyrinth Shield Bearings, the shields will be identical, so follow this procedure for both sides of the bearing. Spin each bearing a few turns in your fingers to spread the lubrication throughout the bearing’s internals. Leave a light film of your fingers on the outside of the bearing to prevent rusting. Reinstall your bearings: When installing bearings in your wheels, be careful not to use a tool that puts direct pressure on the shield or just the inner race. Denting the shield will only cause friction and slow your bearing. A suitable bearing press or tool only presses on the outer ring of your bearing when inserting. Use a bearing press or your truck/axle to press the bearings back into your wheels. Make sure your bearings are properly aligned so your wheels spin freely, quietly, and smoothly. If it isn’t, you’ll need to reset the track to get the bearings parallel and fully seated in the wheel. If they still aren’t spinning smoothly and quietly, you need to review the cleaning process to find out which bearing component is incorrectly installed or worn, and then replace that component or bearing as needed before using the bearing in your impeller.

In terms of competitive use

High precision bearings like Bones® roll best after about an hour of use in a clean environment (this first use is called the “break-in period”). If you want your bearings to peak before a competition or race, we strongly recommend that you break in your bearings, then clean and re-lube them and store them in a moisture-free container until ready to use. When storing your bearings, be sure the outer races are lightly coated with our Bones Speed ​​Cream® or a light oil to protect them from rust.

Note: We have tried to anticipate all possible issues that you may encounter during your cleaning process, therefore these instructions may seem complex on first reading. However, the warehouse cleaning process is logical and simple, and you shouldn’t have a problem with it once you understand our sequential steps.

If you have any questions about your bearings, please feel free to contact us.

Skate hard and enjoy your new Bones® Bearings!

George A Powell