Roborock How To Clean Sensors? The 135 Top Answers

main features

Capacity: 480ml;

Compatible with all Roborock Roborock Mops: S5 Series, S6 Series, S7 Series, E4Mop, E5Mop;

Derived from plants and scented with tea tree oil;

Boosts cleaning power and leaves your home smelling fresh.

Common vacuum cleaner problems and how to fix them

Our lives are hectic at the best of times, and that’s why we expect our time-saving gadgets to work exactly as they should. Some activities are more fun than others, and traditionally vacuuming isn’t one of the most popular. Nonetheless, vacuuming is an essential task in maintaining a clean and healthy home. Although vacuum cleaners are incredibly reliable most of the time, there will inevitably be instances when problems arise, and they usually happen at the most inconvenient times. Luckily, most vacuum problems are easy to solve once you know what’s going on. Here are five of the most common problems we’ve all faced and how to fix them.

Problem #1: There is little or no suction

Lack of suction power is a big problem for a vacuum cleaner – it’s the most important thing it’s designed for! It is also one of the most complicated to diagnose as there can be many reasons for a lack of energy. Here are some of the most common:

A blockage. Clumps of debris, dirt, or other objects can block your vacuum’s head, hose, or throat. Check this carefully by removing the hose and holding a long object, e.g. B. use a broomstick to remove the culprits.

The bag is full. No matter what type of vacuum cleaner you have, a full dust bag will prevent your device from working properly. Get in the habit of emptying it after each use.

The filter is affected. All airflow through your vacuum cleaner goes through a filter. If this filter is damaged or dirty, the air flow will be restricted. Cleaning or replacing your filter can restore the missing suction.

Incorrect adjustment. Advanced vacuum cleaners can automatically detect the floor covering they are working on and increase their suction power accordingly. If your appliance doesn’t, make sure you’re using the correct attachment, brush height, and power setting for the type of floor you’re cleaning.

Problem #2: Your vacuum smells bad

If you want a clean home, you probably want a pleasant smell to go with it. There are several reasons for this, the most common being deposits in the device. If you leave old dirt and dust in the dust bag for a long period of time, there is a risk that any new air that goes through will expel those particles and odors back into the atmosphere. Other causes include frequent vacuuming of pet hair and moisture (from a wet filter) leading to mold growth in the machine.

So how do you improve the smell?

Sprinkle baking soda: Put some baking soda in the dust bag, it neutralizes all odors. Use cinnamon or coffee beans: These additions are excellent and easy ways to leave a nice, sweet smell in your home. Insert scented pads or lavender drops: Adding a scented pad over the filter is a nifty tool to improve the smell of the expelled air. Drip lavender oil over the filter to make your room smell like flowers. Add fresheners to your floors: Carpet fresheners are stronger than cinnamon and last for days. It also gets sucked into your device, leaving a fantastic scent until your next cleaning.

Problem #3: There is a debris trail

You’ve just completed a cleaning task, only to see a noticeable mark of dirt in the spot you just cleaned… While this may be incredibly annoying, it’s also one of the simplest fixes. Assuming you’ve already emptied the dust bag, your next step is to clean the brush and see if it’s broken. If the brush does not rotate freely, it cannot pick up dirt. If it’s not broken and it still won’t spin, the problem is with the internal belt. Consult your manufacturer’s guidelines and replace it.

Problem #4: It won’t turn on or stays on

This is a frustrating problem and harder to diagnose. If your vacuum starts up successfully but then won’t keep running, it’s likely overheated, causing the system to shut itself down. Turn it off and let it cool down for a long time. If your vacuum won’t even turn on, chances are a part isn’t working anymore. Your first step is to test; It’s not the charger or power cord. Plug it into a different outlet or experiment with a different charger if possible. If any of the issues persist, contact a professional or consider upgrading to something new.

How to minimize these problems in the future

two words maintenance and upgrading. Maintaining your current vacuum cleaner will keep it in the best possible condition so it can keep working without problems. Clean it regularly, empty the dust bag, replace the filter if necessary and check for damaged or worn parts. Doing these things regularly maximizes longevity, performance and value.

“If you want to spend less time cleaning and more time living, look into a robot vacuum.”

If your vacuum has regular problems or just isn’t up to standard, it’s time to consider an upgrade. If you want to spend less time cleaning and more time living, consider a robot vacuum cleaner. You can automate them to run anytime, they’re modern and easy to maintain, and some will even wipe. They create a map of your home and return to their charging station whenever they need a new charge.

Roborock is a global leader in robot vacuums, continuously driving innovation and the latest developments in smart home cleaning automation. Our newly announced model, the Roborock H6 Adapt, is the world’s most durable handheld vacuum. The Roborock H6 is exceptionally lightweight, comes with additional accessories and features an advanced sealed filtration system. Here you can see our entire range. If you have any questions or need advice, contact us today.

The problem

Lately my Roborock S4 vacuum was reporting something like “Error 10 – Check the filter, if it’s wet, dry it” every time it was run. The official Roborock support article simply states that the filter should be thoroughly cleaned and dried.

The problem is that even after thoroughly cleaning and drying the filter for 48 hours, it still reported the same error on every run.

The solution

Since official support didn’t help, I searched the web and came across a reddit post where the original poster had the same issue. Many commented that the real solution is to use compressed air to clean the rear vent.

Sure enough, after cleaning the vent with compressed air, the vacuum has been running flawlessly for over a week now. Hopefully this helps someone else who encounters this problem.

What is the most important thing about a robot vacuum cleaner?

That’s right, the device should clean the apartment reliably!

Therefore, we first check the cleaning performance in our detailed comparison Roborock S7 vs. S5 Max.

We gave them a pretty dirty challenge during our testing:

Extreme test on different floor types (laminate, short-pile carpet, high-pile carpet).

Cleaning test in our everyday life (over a longer period of time).

Roborock S7 vs S5 Max: Cleaning Test Report

Roborock S7 Roborock S5 Max. suction power in Pascal 2500 Pa. 2500 Pa. Cleaning result on a hard floor 98% 96% Cleaning result on a low-pile carpet 93% 84% Cleaning result on a deep-pile carpet 96% 88% Special cleaning properties? “Buttons”. They thoroughly brush through the carpet fibers so that the robot can better remove the dirt. The brush is “floating”, which makes it easier to clean uneven floors. – Carpet detection Yes, with carpet turbo function. It also drives along carpet edges and marks carpets on the map. Yes, with the carpet turbo function. It does not mark carpets on the map. Main brush made of rubber. The “floating” brush can better adapt to uneven floors (e.g. carpets). Made of bristle hair and lamellae. Side brush 1 plastic side brush 1 plastic side brush Removal of animal hair/long hair Very good result. Hair hardly wraps around the rubber brush. Does not come with a cleaning tool. Hair occasionally wraps around the brush. You can remove them with the included cleaning tool. Cleaning performance in corners Good Good Number of cleaning modes 4 (Quiet, Balanced, Turbo, Max) 4 (Quiet, Balanced, Turbo, Max) Dirt container 470 ml 460 ml HEPA filter Yes Yes

check price*

check price*

Cleaning test on laminate

The Roborock S5 Max and S7 had no trouble cleaning the laminate.

Both devices easily remove all types of dirt (lentils, oatmeal, sand) from hard floors.

Roborock S7 Roborock S5 max

When cleaning hard floors, you will be equally satisfied with both models. Here the two vacuum robots are on par.

cleaning on carpets

Carpets tend to be much more demanding for all types of robotic vacuums.

Roborock S5 Max vs. S7: Low pile carpet

Roborock S7 Roborock S5 max

Comparison of Roborock S7 and Roborock S5 Max on a deep pile carpet

Roborock S7 Roborock S5 max

The Roborock S7 masters this challenge better than the S5 Max.

Grainy lentils…

Light oatmeal…

Sand…

The Roborock S7 has shone with flying colors on both low-pile and high-pile carpets.

This is thanks to the following features:

Greater suction power.

Better features of the brush holder.

The improved carpet detection function.

Let’s take a closer look at the unique features of the Roborock S7.

The strong suction power of the Roborock S7 (2500 Pa. vs. S5 Max: 2000 Pa.)

The increased suction power comes in handy on the carpet.

This allows the Roborock S7 to easily remove dirt from the carpet fiber… and vacuum it up.

“Floating” brush holder with buttons

The Roborock S7’s main brush is “Floating”.

This means: The brush can move left/right as well as up/down.

Now the brush adapts optimally to the floor surface.

Left right up down

This makes it easier to clean bumps on the carpet and remove dirt more effectively.

The Roborock S7’s brush holder also has “buttons” (the S5 Max doesn’t have that).

The nubs “dig” into the carpet, like a plow in agriculture. This loosens the dirt from the carpet fibers so the rubber brush can catch and remove it.

Source: roborock.com

carpet detection function

Both the Roborock S5 Max and the S7 have a reliable carpet detection function. The vacuum robot automatically switches to the highest cleaning mode as soon as it drives onto a carpet.

But the Roborock S7 has even more to offer.

It also marks carpets on the map thanks to the new ultrasonic sensor.

Ultrasonic sensor marking of the carpet on the map

This marker can serve as a landmark. You can define no-go zones or no-mop zones or have the carpet cleaned separately (several times if necessary) by the robot.

Furthermore, the Roborock S7 has a special handling on the fluffy ground. It also cleans the carpets separately along the edges.

A great feature, because this is where dirt usually accumulates!

Conclusion on cleaning performance on carpets

The Roborock S7 cuts a much better figure on the carpet.

Our special award: The Roborock S7 is one of the best vacuum robots for carpets

The strong suction power and the innovative features lead to better results in our cleaning tests on carpets.

Long story short: The Roborock S7 is the right choice if you have a lot of carpets at home!

Roborock S5 Max vs S7: Long hair

Both Roborock vacuums have no trouble removing hair.

The only difference is that there is a lot more hair wrapped around the Roborock S5 Max’s brush.

This is different with the Roborock S7. Hardly any hair wrap around the rubber brush.

Cleaning the brush is also much easier on the Roborock S7 compared to the S5 Max.

With the Roborock S7 you can easily “pull out” your hair. With the S5 Max, you need to use the included cleaning tool.

Roborock S7 Roborock S5 max

So if you share your home with long-haired pets (or humans), the Roborock S7 (including the maintenance-free rubber brush) is a better choice.

check price*

check price*

Roborock S5 Max vs Roborock S7: Daily Cleaning

Both Roborock vacuum robots cleaned our apartment (no pets, mostly hard floors, no children) without any problems.

The cleaning result is excellent even in the medium cleaning mode (Balanced).

All you have to do is start the vacuum robot…

…wait about 40 minutes.

…and your apartment is sparkling clean.

To cut a long story short: everyday dirt can neither harm the Roborock S7 nor the S5 Max. You will be 100% satisfied with its performance.

check price*

check price*

The RIDGE adds an EDC pocket knife to its line of awesome minimalist wallets

Roborock S7 in review

When Roborock introduced the S5 Max, it changed the way we looked at 2-in-1 hybrids. It was the first robotic vacuum/mop combo I’ve seen that both mop and vacuum.

The electronic water tank was a game changer in a way. Now Roborock adds another layer to this technology with sonic technology. They call it VibraRise and it adds an aspect of movement that you won’t see on many brands. Another upgrade is the Auto Empty Dock, which will be released in a few months.

It will be available as an add-on, but no word yet on whether Roborock will be selling it as a bundle.

The next generation robot vacuum/mop is here Roborock S7 Review One problem with robot vacuums/mop is the inability to efficiently remove dried-in stains. Even with the S5 Max, it took two separate runs to clear out one big spotty mess. Other brands like Viomi rely on a back and forth motion for stirring, which is effective but took too long to complete. The S7 aims to solve this by using sonic technology that vibrates the middle part of the pad up to 3000 times per minute. Roborock has also included other upgrades with the brush, plus other features that we’ll look at below. There’s also the optional Auto-Empty Dock, which empties the robot’s dust bin after each run. Unfortunately, you have to purchase the self-draining base station separately. CEHCK PRICE ON AMAZON

S7 AUTO EMPTY DOCK AT AMAZON *If you click this link and make a purchase, we will earn a commission at no additional cost to you.

advantages

VibraRise is good for removing dried stains

New bristleless extractors improve movement, especially with surface dirt

, especially with superficial dirt The water tank and pad are in independent places, so you can remove one without taking out the other

Decent at deep cleaning carpets despite the low airflow

Despite the low airflow Very efficient and thorough navigation

Auto-empty dock (coming soon) adds convenience, e.g

Disadvantages

Almost 70 decibels at the highest power level

at the highest power level Does not completely replace a traditional mop

Introducing the Roborock S7

The Roborock S7 solves a problem with traditional robot vacuums and mops: their inability to remove stubborn, caked-on stains without leaving messy streaks. This is a problem with older electronic water tank models like the ILIFE V5S Pro.

The S5 Max was one of the best hybrid options for stain removal thanks to its electronic water tank. But it lacks movement as it doesn’t have the Y pattern that Viomi has. However, one issue with Viomi is the time it takes to complete and the inefficiency of water usage.

I will enumerate the list of improvements I found after testing this robot.

Learn how the Roborock S7 differs from the Roomba S9+? I put the numbers together and checked this article to see what I think.

New vibrating mop pad

Sonic vibration isn’t a new invention, but it’s the first time I’ve seen it implemented on a robot vacuum cleaner. An independent motor inside the mopping module moves a smaller portion of the pad side-to-side up to 3000 times per minute. So it doesn’t vibrate the whole pad, but a small part.

In tests, it even removed large, dry stains on tiles. I’ve tried it on several messes like red wine, grape juice, and tomato juice. The latter two are challenging due to their sugar content.

It worked well, but it wasn’t perfect. While it removed the stains, cleaning sugary things like grape juice can leave a sticky residue afterwards.

New brush roll

Another upgrade that Roborock has added to the S7 is the bristleless brush. Previously, Roborock used one type of design, namely a combo brush.

I like the new design as it picks up dirt well with minimal build up underneath.

It also resists tangles better and is easier to clean as it has no bristles.

Improved Floating Brush

In addition to the new brush, Roborock has also improved the brush assembly where it sits by adding a “floating” element.

This means the brush will go up and down and swing from side to side.

It helps the robot track down dirt even on rough terrain, to quote the Roborock product page.

Carpet detection by ultrasound

The S7 has a small sensor next to the steering wheel that accurately detects the carpet. It’s pretty accurate as the pad went up every time it went over rugs or rugs. Another function of this sensor is to shade carpeted areas on the map.

Currently it doesn’t avoid carpet areas alone, but these shadow areas make it easier to draw no-go or no-mop zones since there is a reference.

Intelligent wipe lifting

In addition to the vibrating pad, Roborock adds a mop lift system that raises the pad (5mm) when it detects a carpet.

This feature works best on low-pile carpets, but not on thick piles.

It is intelligent enough to prevent water from dripping down to avoid wiping the carpet and automatically move the pad down once away from the carpet.

Empty dock automatically

Update (July 22nd, 2021): Roborock just released the Auto-empty Dock, an add-on accessory specifically for the S7.

Roborock S7 comes with an optional auto-empty dock that empties the robot’s trash can after each run.

I must point out that this is an add-on and is not included with the purchase of the S7.

It has a ramp-like design, meaning the robot sits on a ramp. One difference is the size of the connector and where it connects, which is towards the main brush roller.

This differs from other brands I’ve tested like Ecovacs, Yeedi, Ultenic and Roomba, where it uses a separate connector that’s typically smaller.

It features a pouch system with a 3 liter pouch. Roborock says it can hold up to 8 weeks’ worth of debris.

In addition, the Roborock S7’s auto-dump dock features two additional filter layers – a primary filter and a HEPA filter that can filter out up to 99.9% (or 0.3 microns) of dust particles from the exhaust vents.

Here’s a close look at the primary filter.

And HEPA filters.

It comes disassembled out of the box and comes with an Allen key/screwdriver tool so no additional tools are required for assembly.

Underneath the ramp component with its own storage compartment (Smart Roborock) is the Allen tool.

The screws are already attached to the base and there are arrows pointing to them, making them easy to find. Once you’ve tightened them all, it’s ready to use.

Consumers also get a separate trash can designed for use with the base station.

The original trash can cannot be used as the base station requires an open port that acts as a drain valve to allow the contents to be siphoned off during the self-emptying cycle.

If you look closely at the area where the bin sits, it has a slot marked as such with a cover that needs to be removed.

After loosening the inlet, attach the new trash can.

Another difference is that the newer trash can is sealed and cannot be opened like the old one.

The filter is removable but the front gate is not present.

I think Roborock made the change to keep the seal tight to ensure dirt doesn’t seep through an opening.

Setting for automatic emptying

The Roborock app allows users to turn on or off the auto drain feature and has these four settings.

After testing the different modes, I don’t see any difference between them. I would leave it on the default (or smart) setting for the best results.

How good is the Roborock S7 Auto-Empty Dock at emptying dirt?

I’ve tested it with different types and amounts of dirt and it’s pretty good. For this section I’ll let the photos do most of the talking and I’ll let you decide.

Daily dirt such as dust and hair.

This time I collected more dust and hair from the Dyson Omni Glide which I use to clean our rooms. Note how dirt sticks to the filter and how the base station picked it up.

Next, a big mess test, where I sprinkled a combination of dust, hair, and Quaker oats. Again, pay close attention to the filter – the sheer amount of dirt that sticks to it.

The next experiment will be done on hair – both pets and humans. I left the trash can open to demonstrate how the auto-drain dock picks up dirt from the vacuum inlet for this test. If you have pets, consider the S7 as it does a good job of cleaning pet hair with the new solid rubber brush.

While the larger port on the S7 dock can accommodate larger debris, there is a limit, and that’s Cheerios and Fruit Loops-sized debris.

Yes, the opening is wide, but the path to the pocket is narrow and a potential bottleneck.

These tests prove that the S7’s auto-dump dock is built on a solid platform capable of dumping debris from the robot’s trash can and filter. I’m impressed with how well dirt sticks to the filter, which I haven’t seen with other brands.

However, with large amounts of dirt (e.g. really full trash can) it will not be good. If you come across it, you can easily empty it by opening the top door, but I doubt you’ll fill the bin for daily cleaning tasks.

child lock

A child lock feature (accessible via the app) disables the robot’s buttons to prevent children from accidentally turning it on. It comes in handy especially for those who have active toddlers who are very curious.

Mop only mode

The S7 features a new “Deep” wipe mode that shuts off the motor completely and focuses on the wipe. Roborock told me that the S7 rotates at a tighter angle, which creates more overlap and kicks up dirt better.

Even with the wipe-only option, the vacuum motor will still turn on when it detects a carpet.

cross pattern

I also noticed the new cross pattern used by the S7.

This robot moves in a horizontal and vertical range when you look at the map (above). This new pattern helps with thoroughness and allows the S7 to pick up dirt with better thoroughness.

Currently, this feature is only available with the S7, but Roborock says they will release an update so older models like the S4 Max, S5 Max, and S6 MaxV can access it.

However, discontinued models like the S4 or S5 may not benefit from this navigation upgrade.

draft

The S7 retains the same round frame seen on older Roborock models with the same three-button interface. Above these buttons is a Knight-rider-type indicator light that flashes a different color depending on the current function.

It flashes white when vacuuming, blue when mopping and green when charging.

The bin is still top loading but with a slight increase in capacity – up to 470ml.

Both the HEPA filter and the dust container are washable, making it easy to clean thoroughly.

Below that, it keeps the same brush layout – a solid rubber brush and the main brush.

Behind it is the brand new wiper module.

water tank

The S7’s electronic water tanks are still rear-loading and receive a slight volume increase – up to 300 ml.

Roborock says you can’t use a cleaning solution as it will attack the internal components.

I like the new design because the mop and water tank are in independent locations meaning you can remove one without taking out the other. This was not the case with older S-series options.

app features

Next, we’ll look at the various app features that the S7 brings to the table. This model is only compatible with the Roborock app, but not the Xiaomi Home app, which shouldn’t be a problem since the Roborock app already has the previously missing room naming feature.

live maps

The S7 has a live map that provides real-time information about the location of the robot in real time. It’s something missing from the iRobot app that makes Roborock a compelling Roomba alternative.

mop route

There are two options – standard and deep. The “Standard” option allows users to vacuum and mop at the same time as both tabs are enabled.

In contrast, the “low” option shuts off the vacuum motor, allowing the robot to extend its reach and just focus on mopping. In this mode, the robot turns in a tighter radius, has more overlap, and removes stains better.

containment

The S7 retains containment features like invisible wall, no-go zones, and no-mop zones. These are useful features as they offer users the ability to block the robot’s path through the app.

processing room

This tab allows users to split, merge, and name spaces. By default, the app tries to separate rooms after the first run, but these partitions aren’t always accurate, so the option to do it manually is always a good thing.

The room naming feature can be used with Alexa for those who prefer the language.

To adjust

Each room in your house can have different floor types. Therefore, Roborock has a customization feature in the app to set the cleaning settings for each area. For example, you can turn mopping on in the kitchen or turn it off when cleaning a bedroom with mostly carpets.

Selective room cleaning

Users can instruct the robot to clean a specific room (or rooms) under the “Room” tab in the main interface by tapping on the map.

zone cleaning

Zone cleaning is similar to selective room cleaning, but instead of tapping on the area you want to clean, drag a box. It’s a more accurate version of spot cleaning, but unfortunately there’s no option to save the zones.

Saving the map

Currently all S series robots can store up to 4 map layers. Users can customize each area as needed with as many invisible walls, no-go zones, or no-mop zones as needed. The “automatic map recognition” ties everything together and allows the S7 to clean multiple layers without manually changing them in the app.

Carpet Boost

Increases the suction power to the maximum setting when carpet is automatically detected. One option is to clean hard floors with the Balanced or Turbo to maximize battery life with this feature.

rise

When this feature is enabled, the mop mount will rise 4 millimeters when it detects or docks with a carpet. You can disable this feature if you have wipeable rubber mats.

Unlimited planning

One of my favorite features in the Roborock app is unlimited scheduling, which allows users to schedule as many runs as needed. Within each slot, users can select their preferred cleaning and mopping modes and choose a specific card.

How much power does the Roborock S7 have?

According to the Roborock website, the S7 has a suction power of 2500 Pa. The same number as the S6 MaxV and 500 more than the S5 Max.

However, airflow tests show a different result. I used an anemometer and the S7 has less airflow than the S5 Max and S6 MaxV.

Power Comp Roborock S7 Roborock S5 Max Roborock S6 MaxV Quiet 8.2 CFM 9.8 CFM 7.9 CFM Balanced 9.68 CFM 12.49 CFM 9.8 CFM Turbo 11.33 CFM 15.68 CFM 12.32 CFM Max 13.91CFM 17.74CFM 15.68CFM

One reason could be the larger surface area of ​​the brush, which restricts airflow.

The good news is that the new brush does a great job of picking up dirt (more on that in the cleaning test section).

How does the Roborock S7 navigate?

The S7 retains the LIDAR sensor that’s a staple of all S Series variants. One reason for a laser-based robot is that it doesn’t rely on light, unlike VSLAM robots with a top-mounted camera.

You can run the S7 in pitch-dark conditions and it still maps accurately. This is not possible with VSLAM (e.g. Roomba I6) as it needs light for the camera sensor to work.

Coverage is excellent as it picked up most of the stray Quaker oats even at the edges after the first pass.

Obstacle avoidance is another strength. It didn’t hit any of the objects hard. The S7 is one of the best smart robot vacuums that can avoid obstacles even though it doesn’t have a front camera.

Automatic room detection

Another feature worth mentioning is the automatic room recognition feature, where the robot loads the right map based on the first scan. This means users don’t have to switch maps manually when moving the robot to another level, as the app does it for them.

Adaptive route algorithms

As the robot navigates through your home, it will choose the most efficient pattern when traversing. The S7 app also adapts a criss-cross pattern where the robot drives north-south and east-west for better thoroughness.

cleaning performance

I was curious how well it would clean different types of dirt with the new brush roll, so I put it through the usual tests.

Here are the results.

Overall: 94.31%

Hard floors: 99.7%

Carpet (Surface): 98.9%

Deep cleaning: 78.85%

Sand on hard floors: 99.8%

Despite the lower than expected airflow, the S7 did an excellent job picking up surface debris while still doing decent on embedded sand. The new brush roll did its best to pick up surface dirt on hard floors, scoring close to 100%.

hard floor results

Quaker Oats: 99.8%

Coffee: 100%

Quinoa: 99.8%

Pet litter: 99.2%

The S7 excelled on various types of dirt on hard floors, picking up over 99% in all tests. I noticed minimal scattering of dirt with the side brush since it wasn’t spinning as fast.

Even with pet litter, litter was minimal and a big reason it picked up a large percentage.

sand on hard floors

One of the hardest things about cleaning hard floors is sand. Even with the low airflow, the S7 still picked up an average of 99.8%. The eye test shows that it picked up dirt cleanly and there was almost no sand build up on the brush and the areas around it.

hair wrap test

Another test I did with the S7 is the hair wrap experiment with five and seven inch strands. Here are the results.

5 inch test: 75% in bin, 25% around brush 75% in bin, 25% around brush

7 inch test: 44% in bin, 56% around brush

So the new design isn’t completely tangle-proof, but the bristle-less nature makes detangling easier. The removable end caps also help to remove debris from the axles.

Edge cleaning test

A battle with round robots would be their inability to efficiently clean edges. The S7 has those issues, but it’s been decent at clearing most of the debris in that area. It didn’t take every bite but cleaned most of it.

carpet cleaning

The new brush makes the S7 above average at cleaning carpets, taking up a high percentage. However, the values ​​are not as high as on hard floors, but still above average on surface dirt.

Low pile results

Quaker Oats: 98.2%

Coffee: 97.2%

Quinoa: 100%

Pet Litter: 100%

As expected, the S7 performed worst on fine dirt like coffee grounds, but it excelled at picking up 100% of quinoa and pet litter. But overall, the percentages are above average and in line with other Roborock models.

Mid pile results

Quaker Oats: 98.8%

Coffee: 97.6%

Quinoa: 100%

Pet Litter: 100%

The results on mid-pile carpet reflect the low pile levels as it struggled the most with coffee grounds. Strangely, it picked up a slightly higher rate on this surface. The results show that the S7 is a capable robot vacuum, at least down to mid-height rugs or rugs.

deep cleaning results

I tested the S7 with 100 grams of sand on medium-pile carpet and it gained an average of 78.85% in two tests – more than the S6 MaxV (77.65%) but less than the S5 Max (84.75%).

It’s not as good as a Roomba I6 or 980, but still a decent percentage considering it had one of the lower airflow readings of any Roborock option.

wiping performance

Now for the moment of truth. How does the Roborock S7 clean stains? Can the new vibration feature handle these blemishes any better than the S5 Max or S6 MaxV?

To find out, I tried it on three different stain types – red wine, grape juice, and tomato juice.

Here are some before and after photos, first with red wine.

Then grape juice and tomato juice.

The photo doesn’t show how the S7 removed the smudges after a one-pass cycle – something impossible without movement.

The red wine stains were initially difficult to remove in the first test because the pad was not soaked through. But once it got enough saturation, it removed the stains.

A workaround is to pre-soak the pad and then wring out the excess water. You want the pad to be damp but not soaking wet.

Avoid pouring cleaning solution into the tank as this will damage the internal components – Spray the pad with your preferred cleaning solution.

How loud is the Roborock S7?

I used a sound meter to measure noise and here are the results.

Quiet: 59.4dB

Balanced: 60.1dB

Turbo: 64.6dB

Maximum: 69.8dB

It was quiet in its quiet surroundings at just under 60 decibels. However, this was not the case in the max setting of just under 70 decibels.

How long does the Roborock S7 run?

The S7 keeps the same 5200mAh Li-Ion battery and runs for up to 180 minutes in quiet mode. However, this number decreases with the higher power settings.

When charging and resuming, runtime shouldn’t matter, as this robot will resume cleaning after charging if it didn’t finish the run before.

What’s in the box?

Roborock S7 Robot (with Side Brush and Main Brush attached) Mop Mount Manual and Quick Start Guide Charging Dock Connector

Parts Availability

In recent years more and more third party brands have started selling Roborock components like filters, main brushes, side brushes and even the battery. So this bodes well for the long-term viability of this product.

Unfortunately, users will struggle to source hard-to-find parts like the side wheel module or side brush motor. Roomba still reigns supreme in this aspect with its popularity as most of the parts are available online from stores like Amazon or eBay.

maintenance

Next, let’s look at the various components that users need to replace or clean at specific intervals.

Main brush: The S7’s new brush design should last longer as it omits the bristles. However, you must check it at least every two weeks to remove any hair or dirt buildup from wiping stains. The rubber construction makes it easy to clean and remove hair that wraps around it. Side Brush: Next on the list is the side brush. Hair gets tangled on the tentacles or at the base. Clean this part once or twice a month, maybe more often if you have pets or live with someone who has long hair. Brush Assembly: Another part that needs cleaning is the main brush assembly, especially after mopping. Stain residue will stick to this area, so use a slightly damp cloth to wipe away the stain. Trash Can: Empty the trash can after each cleaning cycle to prevent dust mite proliferation. Both the filter and the dust bin are washable, making thorough cleaning easier. Do this at least once a month. Don’t forget to check the area under the trash can for dirt build-up. I use a handheld to clean this area when I see dirt. Wheels: Use a microfiber cloth to wipe away debris on the side and caster wheels. Do this at least once a week, but increase the frequency if you use this spot cleaning robot. Fall and Carpet Sensor: There are sensors under this robot that prevent the robot from falling off cliffs and detect carpets. A dry, clean microfiber cloth is an excellent tool for keeping these sensors clean. Mop Pad and Water Tank: Wash the mop pad after each run as you don’t want bacteria and germs to spread. I would advise consumers to buy extra so they have something to use when you throw the soiled ones in the washing machine. Don’t leave water in the tank for long periods of time – only if you use it daily for mopping. Body: Take a clean microfiber cloth to wipe the robot’s body.

Product Specifications

Model Roborock S7 Manufacturer Roborock Battery 5200 mAh Li-ion Running time 180 min. Dirt capacity (dry) 470 ml. Auto drain Capacity 3 liters Water tank 300 ml. Diameter 13.8 inch Height 3.8 inch Auto drain Yes Intelligent navigation Yes Charge and continue Yes HEPA filtration Yes Side brush Yes Extra filter No Mains voltage 100-240 volts

Auto Drain Dock: 120 volt only Warranty 1 year Price Check Price

Where can I buy the Roborock S7?

The Roborock S7 will be available on Amazon. Check the link below for the latest prices.

Roborock S7 on Amazon

Roborock S7 Auto Empty Dock on Amazon

Disclaimer: I get a commission if you make a purchase through the link above, but at no additional cost to you, so it’s a win-win for us!

Does the Roborock S7 offer excellent value for money?

That depends on the cost of the S7. Will it be as expensive as the S6 MaxV with artificial intelligence? If so, I’d consider it again as the S5 Max offers the same functionality but at a cheaper price.

However, the upgraded wipe module, wipe lift, new brushroll, and navigation improvements make this a compelling option, especially for those who value the movement it brings to the table.

In tests, it cleaned dried stains after one pass — even sticky messes like grape juice stains.

Cleaning performance is similar to other Roborock models, but slightly less effective at embedded debris than the S5 Max. However, expect a sticky residue if you use it to clean sugary stains. But it was able to handle the chaos after a second run.

5 reasons to buy the Roborock S7

Excellent wiping performance: VibraRise is excellent at cleaning dried-in, caked-on stains and does so in a single sweep with three passes. Great at vacuuming: The S7 scored well in most cleaning tests, especially for superficial dirt. Smart Mop Raising: Users can now run this robot without worrying about setting up no-mop zones as the mopping module will automatically raise when it detects a carpet. Mopping only mode: There is an option to switch off the motor and use it exclusively as a mopping robot. Cross Pattern: The robot moves north, south, east, and west to maximize floor vacuuming thoroughness.

Verdict: Vibrating mop works

When I first heard about this product I didn’t know what to expect. But after days of testing, the new wipe module works and can remove dried stains.

I’ve tried it on big ones that you wouldn’t normally use a robot mop on and it cleaned everything. It’s a game changer in my opinion and I would expect other brands to copy this feature if the market takes it well.

Die Reinigungsleistung bleibt ähnlich wie bei anderen Roborock-Optionen und macht den S7 zu einer echten Zwei-in-Eins-Roboter-Saug- und Wischoption, die beide Aufgaben sehr gut erledigt.

Wenn das automatische Leeren des Docks gut funktioniert, haben wir ein großartiges Produkt in unseren Händen. Aber auch ohne ist dieses Modell eine hervorragende Alternative.

The Roborock S7 is the first sonic scrubbing robot that can vacuum and wipe in one go. Featuring intelligent mopping technology that removes stubborn stains and lifts them up when not in use, this is certainly one of the most advanced dual cleaning vacuum mop combos we’ve seen.

But does it stand up to our tests? Let’s find out!

Sonic Scrubbing Robot Roborock S7 vacuum cleaner and mopping robot The Roborock S7 uses a scrubbing rod that changes the position of the mopping pad up to 3,000 times per minute. This technology is paired with other sensors that intelligently recognize when to use the mop and when to lift it to store. As a vacuum cleaner, the Roborock S7 performed well in our tests, removing 96.7% of all debris. The build quality is fantastic and feels significantly improved over the previous generation. All of this is coupled with Roborock’s excellent digital mapping and navigation. check price

advantages

Advanced scrubbing mop pad with variable water flow

Compatible with standard charging station or self-draining charging station (launch 2021)

Up to 3 hours run time with 5200mAh battery

Large area coverage; vacuum up to 3,200 sf. or mop 2,100 sf

Excellent suction power, removes 96.7% of debris

Disadvantages

Pretty high price point

It lacks the front-facing cameras and obstacle-detection AI we saw on the Roborock S6 MaxV

Points

The best robot vacuum and mop design – 98% 98%

Performance – 97% 97%

Quality – 97% 97%

Ease of use – 97% 97%

Value – 95% 95% 97% Summary The Roborock S7 is a 2-in-1 robot that vacuums and mops. It performed well in our cleaning tests, removing 96.7% of all dirt. Wiping tests were also good, with a large amount of dust and dirt accumulating on the cleaning pad during a single cleaning cycle. The S7, like all Roborock S Series robots, comes with excellent digital mapping, clean row navigation, restricted zones and more. The Roborock S7 takes it to the next level with the mop, which can be raised or lowered depending on the floor type. In addition, there are improved mop cleaning modes, an XL dust container and an XL water tank. Couple these improvements with an optional self-draining dustbin and the S7 checks a large number of boxes on our list. A fantastic robot vacuum that is sure to be a favorite for years to come.

Would you rather watch than read? Below is our Roborock S7 video review:

cleaning performance

To fully evaluate cleaning performance, we usually put all robotic vacuums to the test.

We test on three different soil types, including:

hardwood floors

Low pile rug

Shaggy carpet

And on these floors we spread a mixture of debris including:

Rice – 0.5 oz

– 0.5 oz dry cereal – 0.5 oz

– 0.5 oz cat litter – 0.5 oz

– 0.5 oz Sugar – 0.5 oz

To conduct the tests, we spread a small amount of dirt on different floor coverings (within a limited test area) and then release the vacuum.

Clean Roborock S7

We give the robot a chance to completely remove the dirt and then measure the remaining dirt left in the carpet/hardwood.

test data

Below are our full test results for the Roborock S7.

Total 96.7% Hardwood 99% Low Carpet 94% High Carpet 97%

Parquet cleaning

Hardwood cleaning performance was fantastic and it was able to remove up to 99% of residue tested on hardwood floors.

Roborock S7 hardwood reviews

Low pile carpet cleaning

Low pile carpets performed the worst of the 3 floor types we tested on, removing 94% of all soil. However, a 94% removal is still a solid cleaning result and one of the best performances we’ve seen from Roborock.

Roborock S7 Low carpet reviews

The only notable residue left was sugar (see image below).

Roborock S7 missed debris

Deep pile carpet cleaning

On high-pile carpets, the soil removal rate was better at 97%.

Roborock S7 High Carpet reviews

We expect the S7 to perform better on high-pile carpets, as the higher carpet fibers create a tighter seal with the brushroll (thereby increasing suction).

wipe tests

For our mopping tests, we had the Roborock S7 clean a 2,600 square foot single story home. The house is a mix of hardwood, tile and carpeting.

Roborock S7 wipe tests

The S7 pulled a solid amount of dirt and small debris onto the cleaning pad. The before and after shot speaks for itself. The S7 is by far the best robot mop we’ve seen from Roborock so far.

We tested the mop on the mild setting, which we thought would better protect the hardwood floors. Other more intensive cleaning modes will perform better.

S7 theme

The design of the Roborock S7 mimics many of Roborock’s other models from above, but the bottom is really different.

Roborock S7

It is available in two color variants – White Body or Black Body.

White black

The top of the vacuum has a central 360° LIDAR sensor in the center of the vacuum with simple controls above.

Roborock S7 wheels

There is a bumper at the front and a dust bin release at the bottom.

Roborock S7 inside

The rear release opens the mop bin and the inner case contains the dust bin and filter.

The controls

The controls of the S7 include:

Spot Clean: Uses a radial pattern to clean a small area; When the area is clean, it returns to the charging station

: uses a radial pattern to clean a small area; When the area is clean, it returns to the charging station. Power : Starts or stops a cleaning cycle

: starts or stops a cleaning cycle Home: sends the S7 back to the charging station

Roborock S7 buttons

There’s also an LED arc light above the control buttons, which can illuminate to let you know about the S7’s status or to alert you if there’s a problem.

What is on the bottom of the vacuum cleaner?

As mentioned above, the underside of the S7 has a rather unique mopping attachment, as well as a spiral brush roll for dry vacuuming.

Bottom of the Roborock S7

So what’s different?

#1. The mopping pad can be raised when not in use.

Traditional 2-in-1s usually need barriers to know where they can and can’t go. Damp mopping is only meant for hard floors, so the S7’s ability to automatically raise itself when it hits rugs or rugs is a huge plus for this Roborock.

Roborock water tank

#2. The scrub bar moves the mop pad.

On the underside of the vacuum, right along the edge, is a small rod that actually slides the mopping pad to create a light scrubbing motion while cleaning.

The scrubbing arm of the S7 gently scrubs up to 3,000 times per minute.

This rod can move the pad up to 3,000 times per minute.

As the rod moves, the microfiber mopping pad also moves, which can help the mop gently remove dried residue or sticky liquids that may need some scrubbing force.

#3. The floating spiral brush roller can be adjusted to fit different floor heights.

The central brushroll has a floating design that can be automatically raised or lowered to accommodate different floor heights. A floating construction helps ensure the brushroll always has the best contact with a changing floor level.

Roborock S7 brush roll

How does it clean?

Roborock S7 cleans each room by creating a digital map and automatically adjusting cleaning modes until the area is clean.

The map can be viewed in the Roborock app, where you can not only see a colored view of the clean areas, but also a summarized version of the path the vacuum took to get the job done.

What is the cleaning pattern?

The S7’s cleaning pattern cleans the edges first, then cleans the rest of the room in a straight pattern. Here is an example of a cleaning map generated by the Roborock app.

Digital Roborock Card

vacuum cycles

The S7’s available vacuum modes include:

Quiet: Works with lower suction power, which means less noise. Also the lowest cutting performance of the 4 cleaning modes. Balanced: standard suction power. A good balance of power, performance and runtime. Turbo: Vacuums at a higher speed, which allows the cleaning task to be completed faster. Max: Creates the maximum level of suction and sealing possible. Ideal for carpets and high traffic areas.

Below is an in-app view of changing the cleaning mode.

Roborock S7 cleaning modes Roborock S7 cleaning history

wipe cycles

For wiping cycles, you can choose between 4 different modes:

Close (no water used)

Easy

Moderate

Violent

You can also enable Deep Cleaning mode, which uses the maximum speed scrub setting.

Roborock S7 deep cleaning wipe mode

The high-intensity scrub settings range from 1,650 bpm to 3,000 bpm, depending on the type of spill you’re cleaning.

The scrub arm moves the mop pad back and forth to remove stains

area coverage

Area coverage is a big win with the S7 in my opinion. It can run for up to 3 hours and the coverage area is much larger than other models we’ve tested so far – especially when mopping.

Suction capacity approx. 3,200 sq. ft. wiping capacity approx. 2,100 sq. feet

COMPARISON: The Braava 380t has a maximum mopping power of 300 sf and the Braava Jet 240 has even less, at just 150 sf. Check out our Brrava 240 vs 380t comparison here.

app control

The Roborock S7 can be controlled with your smartphone when paired with the Roborock app, a technology that is also familiar to older Roborock models.

Planning the Roborock S7 app

With the app you can:

Starts / stops a cleaning

Send the robot back to the charging station

Show digital map

Draw “no-go lines” for custom boundary cleaning

Set zones or send the robot to a specific spot

Manage cleaning schedules

With the in-app map you can name specific zones or block specific areas, as well as view the current cleaning report or identify problem spots.

Intelligent navigation and mapping

The Roborock S7’s navigation and map technology is quite impressive and shares many similarities with the wider Roborock S-series lineup.

The built-in laser scans the room at 300 rpm and then uses this information to map the dimensions of each room to within +/- 2cm.

Roborock S7 digital map Roborock S7 carpet settings

In addition to detailed maps, the S7 can also scan different levels within a house and automatically remember the floor plans for each level.

At any time during or after a cleaning cycle, you can view the app to see the progress and see if the robot missed any spots. Problem areas can be easily identified and addressed with no-go zones/lines.

limits

The Roborock S7 offers a range of boundary styles. You can opt for:

Invisible Walls: a straight line that marks a wall that you don’t want the S7 to cross. No-Go Zone: Marks a rectangular area you don’t want the S7 to enter. You don’t want the S7 mopping zone cleaning: Name specific rooms on the map, then program the S7 not to enter those rooms

No walked zones, invisible walls and no wipe zones

I will add here that the Roborock S7 can automatically know when to mop and when to vacuum, so you don’t have to worry about marking carpeted areas as “no-mop zones”.

sensors

Six cliff sensors that round the edge of the vacuum help prevent the S7 from falling off edges or stairs. Sensors also help this robot navigate around tall furniture, walls, and other obstacles in straighter, more logical paths.

voice commands

Along with zone cleaning and smarter digital maps, voice commands are also a big part of the S7’s user-friendly experience.

Alexa device

This robot is compatible with Amazon Alexa, Google Home or Apple Siri and you can program a variety of voice commands from any of these platforms.

Charge and continue

The Roborock S7 includes the Recharge & Resume feature. If the S7’s battery dies before the cleaning is complete, it can be recharged in the middle of a cleaning cycle.

How does it work?

The S7 performs the initial cleaning. Drives back to the dock when the battery is low. Load. When the battery is full, the S7 will return to the last spot cleaned to continue the cycle.

This can be a handy feature for large floor plans or homes with a large amount of furniture or obstacles that can complete cycles and take longer to clean.

Size & Dimensions

The Roborock S7 is slightly larger than the previous Roborocks we’ve tested.

Roborock S7 size

Not only is it larger, it is also slightly heavier than many other Roborock models.

Diameter: 13.8″

13.8″ Height: 3.8″

3.8″ Weight: 10.3 pounds

The S7 feels significantly improved when it comes to build quality and parts. That’s not to say other Roborock models were bad, they were consistently well above average.

But the S7 goes one step further. In my opinion it is the best built robot that Roborock has delivered.

Accessories & Parts

Here is a list of everything included in the box with the Roborock S7:

Charging station: Provides a centrally located place to charge the vacuum between cleaning cycles

provides a centrally located place to charge the vacuum cleaner between cleaning cycles Spiral Brush Roll: The main cleaning component to stir up and collect dirt on all floor types, even deep-pile carpets, constantly rotating as it moves across the floor surface. Contains only 1 rotating brush (no replacement).

Dust Bin: Collects dry dirt and debris agitated on floor surfaces during cleaning cycles

houses dry dirt and debris caught during cleaning cycles HEPA Filter: washable and reusable filter in dust bin that captures pet hair, dust, mold and other particles during cleaning. A HEPA filter is installed and a spare is included.

washable and reusable filter in the dust bin that captures pet hair, dust, mold and other particles during cleaning. A HEPA filter is installed and a spare is included. Mopping pad: washable pad that damp mops the floor without releasing too much water at once, gently scrubbing dried dirt or sticky stains

washable pad that damp mops the floor without releasing too much water at once, gently scrubs dried dirt or sticky stains. User Manual: Information on how to use, care for and troubleshoot the Roborock S7 is included in the user manual

Ease of Use & Maneuverability

The overall usability of the S7 is pretty good in my opinion. The user interface is simple and offers many options for control:

Physical buttons on the vacuum cleaner

In-app control via your smartphone

Voice control with Amazon Alexa (or similar)

It also has a practical approach when it comes to the cleaning cycle. Navigation is advanced enough not to get stuck in easy places and it can remember up to 4 different floor plans in a house.

Roborock S7 charging station

The S7 has a runtime of 3 hours and a large dust container capacity (up to 470 ml).

In 2021, Roborock will also launch the Auto-Empty dustbin, which will allow the vacuum cleaner to dump the contents of the built-in dustbin into a larger bin on the docking station.

This will likely be a pricey dock (price not yet announced), but the convenience certainly improves the overall usability of the S7 if you decide to go down that route.

Roborock S7 maintenance

The maintenance tasks for the Roborock S7 are quite similar to the tasks you would have with any 2-in-1 robot vacuum and mopping robot.

Roborock S7 filter

Here are the associated tasks:

Empty the dust bin regularly: This is the most common maintenance task. The dust container should be emptied after each cleaning cycle. Wash the dust container and HEPA filter: let it dry for at least 24 hours before putting it back in the vacuum cleaner. Replace HEPA filter (as needed) Replace battery (as needed): Most robot vacuums have batteries that last 2-4 years. This is only an estimate, however, as Roborock doesn’t state a lifespan for the included battery. Remove obstacles from the brush roll: You should remove the brush roll regularly to remove hair and other obstacles. Remove and wash mop pads: The mop pads attach to the bottom of the mop with Velcro, so you need to remove and wash them regularly to keep the mop at peak performance.

Roborock S7 Dust Bin

Empty dock automatically

As mentioned above, Roborock announced the launch of its Auto-Empty Dock, which automatically empties the contents of the built-in dust bin and disposes of them in a larger dust bin inside the docking station.

Roborock S7 with Auto-Empty Dock (Launch 2021)

This is not dissimilar to Roomba’s “Clean Base,” which essentially does the same thing.

RELATED: Click Here to Read Our Roomba S9+ and CleanBase Docking Station Review

Is the Roborock S7 a good value?

So let’s talk about the value of the S7. It’s the new guy on the block that certainly has its appeal, but is this 2-in-1 worth the steep price tag?

Roborock S7 cleans hardwood

Some of the cool features it brings to the table include:

Digital mapping

zone cleaning

Sonic Scrubber (Variable Speeds)

Auto-Lift Mopping Pad

Compatible with car empty charging station

I would say the only real stinger of this model is the price. But given the price tag of some of the highest-end Roomba or other top brands, the Roborock S7 still sits in that price bracket.

All in all, I think the S7 is good value for money. It has a number of impressive features, many of which are unavailable on many other brands.

If you’re looking for excellence and you’re willing to foot the bill, the S7 is a solid choice.

Roborock S7 Max specifications

Specifications Roborock S7 Type Robot Manufacturer Roborock Model S7 Width 13.8″ Height 3.8″ Weight 10.3 lbs. Floor type All (indoor) Suction power 2,500 Pa Battery 5,200 mAh Run time 180 min Vacuum cleaning area ~3,200 sq ft Mop cleaning area ~2,100 sq ft Dust bin capacity 470 ml Water tank capacity 300 ml Charging time <6 hours Noise level 67 dB (balanced mode) Zone cleaning Yes Digital Mapping Yes Returns Varies by retailer, varies by retailer Warranty 1-year limited price Check price Should you buy the Roborock S7? I would recommend the Roborock S7 if you are looking for the following in a robot vacuum: Better mopping performance: Many robot vacuums claim to offer mopping capabilities, but it rarely does more than lug around a damp microfiber cloth. While this can certainly remove light to moderate surface soiling, it doesn't really replace traditional mopping. The addition of the scrubbing motion really improves the S7 and makes it a much better mop. It's probably not a full wiper replacement for most consumers, but it's a big step up over many other 2-in-1s. : Many robot vacuums claim they offer mopping capabilities, but rarely does it do more than lugging around a damp microfiber cloth. While this can certainly remove light to moderate surface soiling, it doesn't really replace traditional mopping. The addition of the scrubbing motion really improves the S7 and makes it a much better mop. It's probably not a full wiper replacement for most consumers, but it's a big step up over many other 2-in-1s. Long Battery Life: The Roborock S7 can run for up to 3 hours (up to 180 minutes), which should be more than enough for most cleaning jobs. The vacuum cleaner contains a 5200 mAh battery for stronger and longer cleanings. The Roborock S7 can run for up to 3 hours (up to 180 minutes), which should be more than enough for most cleaning jobs. The vacuum cleaner contains a 5200 mAh battery for stronger and longer cleanings. Automatically detect flooring: Two-robot mops and vacuums typically perform best when they can automatically detect changes in flooring. Not only can the S7 avoid wiping inappropriate areas, but it can also temporarily lift the mopping pad until it's passed the carpet, and then continue mopping when it's back on a hard floor surface. Two-robot mopping robots and vacuum cleaners perform best when they can automatically detect changes in the floor covering. Not only can the S7 avoid wiping inappropriate areas, but it can also temporarily lift the mopping pad until it's passed the carpet, and then continue mopping when it's back on a hard floor surface. Excellent cleaning performance: The S7 removed 96.7% of all dirt in our vacuuming tests, and the mopping tests were pretty solid too. The pad sucked up a huge amount of dirt, dust, and light debris. Click here for more information or to check the price of the Roborock S7. More Roborock Reviews Our full list of Roborock reviews can be found here: changelog

Robot vacuums have come a long way since they were first introduced to consumers. Their suction power has improved, along with the little vacuum’s ability to find its way around a room. Unlike earlier models, which often got lost trying to find their way back to the docking station, newer models rarely have this problem. These technical advances make the robot vacuum more convenient, but can it clean floors in the dark?

Most robot vacuums can clean in the dark by using infrared technology that looks for obstacles in the device’s path. However, some models may be too noisy to run at night and others don’t work as well with the lights off, so the capabilities of the specific model matter.

Simply put, thanks to the included infrared hardware, most robot vacuums can clean at night with no problem. However, as mentioned, be aware of how noisy it is before attempting to sleep at night with the feature on. The last thing you want is a noisy robot vacuum keeping you up at night, which is another reason why it’s best not to think of a robot vacuum as a replacement for a traditional one (our discussion on that).

How robot vacuum cleaners work

Robot vacuums are a bit more complicated than traditional vacuums, mostly because the little sweeper has to clean and maneuver itself (more on what they can do in our guide). The vacuum cleaner is powered by the battery and navigates through the room using a large number of sensors. The air suction technology – together with small rubber brushes – removes dirt and debris while the vacuum robot sweeps the floor.

How a vacuum robot protects itself from damage

While all of the little vacuum cleaner’s components are necessary, it’s the various sensors that help it clean day or night. It also uses a sensor on the docking station to measure room size, data that the automatic vacuum cleaner uses to map out its cleaning path. In addition, object sensors in the bumpers prevent the device from colliding with furniture and other objects on the floor.

In other words, you don’t have to turn on the light for the vacuum to “see” obstacles in its path. It’s worth noting that you don’t have to worry about it falling down the stairs, as there are “cliff sensors” preventing it from doing so. In fact, we’ve already talked about it. There is another type of sensor on the side of the bumper.

Called wall sensors, they allow the vacuum to brush against edges without bumping into them. You can also use a stationary device to create boundaries that prevent the vacuum from leaving a certain area. You can achieve the same thing with a sturdy object placed where you want the vacuum to stop.

How robot vacuums work in the dark

Vacuum robots use their various infrared sensors to guide the device through dark rooms. Some higher-priced models also come with 360-degree cameras. The camera is mounted on top of the vacuum cleaner and surrounded by LED lights that help illuminate your path. That being said, not all robot vacuums come with cameras and this can be a problem in some cases as it often reduces the ability to see what is going on.

The amazing thing about robot vacuums is the fact that they can actually “see” the dirt inside them. The brushes are still picking up small debris as the vacuum sweeps through the room. If you want to spend less money you can get robot vacuums without a camera, but they won’t be quite as good, especially at night. Aside from that, cameras can also have their own problems.

Cameras and other problems with light

Sometimes a camera can prevent the robot vacuum from cleaning dark rooms for a specific reason: the camera needs light to see the room. Some models come with LED lights that prevent this problem, but if yours doesn’t have an LED light you’ll need to leave a light on, which obviously isn’t ideal when you’re trying to sleep at night (unless that’s the one Case). for another room).

Too much light is also a problem for some robot vacuums, as bright sunlight or fluorescent lights that are heavily on can affect the vacuum’s performance. Bright light can drain the battery, causing the vacuum cleaner to move sluggishly. Slower running robot vacuums are not able to clean your floors thoroughly.

Problems with dark surfaces

Most robot vacuums are equipped with sensors that can tell the difference between dark floors and the area that marks a ledge or staircase. However, some cheaper models have trouble walking over dark floors. It usually only applies to hard floors, the slight buoyancy that comes with carpeting often doesn’t trigger the cliff sensors.

Automatic vacuums that come with cameras can also have trouble cleaning dark surfaces. The lack of light can cause the device to turn over and return to its docking station. Contrary to what some people try, blocking the sensors isn’t a solution as it interferes with the infrared signal that the device sends and receives from the docking station. The best advice is to turn on a light or use the vacuum cleaner only during the day.

The problem with night vacuuming: noise

The lack of light that afflicts some robo-vacuum models isn’t the only potential issue with operating the device at night. There is also the issue of noise. It’s hard enough to fall asleep at night, the last thing you want to add is the sound of a robot vacuum cleaner. Some automatic vacuums are surprisingly noisy given the small size of the device.

It doesn’t compete with most traditional vacuums, but you’ll hear it working at night. Not all models are loud, some are even designed for quiet operation. You’ll find that some robot vacuums are no louder than your microwave, which might be too much for some people, although it’s not that loud. To find out how loud a vacuum cleaner is before you buy it, check the product specifications or, even better, the video reviews.

Robot vacuum cleaners that work in the dark

Several robot vacuums clean in the dark, and many of them even come at a wallet-friendly price. Robot vacuums like the Roborock S5, iRobot Roomba s9+ and Dyson 360 Heurist are known for being great robot vacuums that are also quiet. Their noise level is also low, so you can sleep while the robot vacuum cleans.

Roborock S5

With 2,000 Pa suction power, the Roborock S5 (from Amazon) thoroughly vacuums your hard floors and carpets. It can run for up to 180 minutes before returning to the docking station. It’s also surprisingly quiet when it’s working. The S5 uses LIDAR (Light Detection and Range) technology to scan the room, along with a SLAM algorithm that maps the ground to find the most efficient path. In addition to cleaning all types of surfaces, this handy device also has a water tank for wiping hard surfaces.

iRobot Roomba s9+

iRobot’s (on Amazon) Roomba s9+ is designed to work in both light and dark rooms. Like other models, it uses LIDAR hardware to draw its path through space. It has advanced sensors that scan ahead 25 times per second to ensure the device does not encounter obstacles or obstacles. The Keep Out Zone feature lets you set up invisible barriers so you don’t have to worry about it while you sleep. It’s also smart enough to remember its path so it doesn’t go back.

Dyson 360 Heurist

The Dyson 360 Heurist (on Amazon) doesn’t care if it’s vacuuming in the dark because it’s equipped with a 360-degree camera surrounded by eight LED lights: it can easily spot any debris or obstacles in its path.” see”. It’s also guided by optical sensors that poll the room every 20 seconds to ensure the robot knows where to go at all times.

Additionally, there are three power modes to choose from, including a power saving mode, which is best to use so you don’t have to worry about as much noise while trying to get a good night’s sleep (it’s also great for charging your phone, too). quickly, as we explained earlier). There are also sensors preventing it from going down (which also include multi-level mapping).

Using a robot vacuum cleaner in the dark

You can use a robot vacuum in the dark if you have the right one; Remember that not every model can clean without the lights on. Look for models that come with the right hardware, including LIDAR and other mapping sensors. If yours comes with a top-mounted camera, make sure it’s surrounded by small LED lights, as the lights are necessary for it to “see” in the dark.

Another important factor that you should not forget is the noise. Check the volume before deciding to vacuum at night, especially if you are a light sleeper who is easily disturbed by noise. There’s a good chance you won’t be able to sleep hearing the machine running (unless you’re used to the noise).

Even with the best precautions, dirt will no doubt find its way into your home. And if that’s the case, the best remedy is a good wipe. While cleaning is an endless cycle – and floor care the most relentless – a little vigilance goes a long way. But before you start swiping at random, develop a plan to maximize your efforts. To help you with this, Martha has shared some of her top mopping tips from her book Homekeeping Handbook: The Essential Guide to Caring for Everything in Your Home ($27.40, amazon.com). Ahead, she shares her best mopping tips, from the types of mops you need to know about to the best ways to do the chores yourself — and she talks about how often you really need to clean your floors, room by room .

Of course, shiny floors start with the right tools. Start by choosing a mop – and be sure to inspect the appropriate mop head accordingly. Look for eco-friendly, machine-washable options that are easy to clean, then stock up on other essentials, like floor cleaner and a bucket (be sure to choose one that fits the shape of the mop head). The preparatory work does not end there: Before you start wiping, carefully examine your surfaces again with your vacuum cleaner. Removing dust, dirt, hair, and other large particles is the next step toward cleaner floors (skipping this step will negate the hard work that follows!).

When you’re ready to start mopping, consider your method. Set yourself up properly by starting in the back corner of the room and working backwards – this will ensure you don’t walk straight into an area you’ve already cleaned. Before that, more of Martha’s top mopping tips, including the rest of her methodology.

I’ve had my own handyman business as a side job for the last few years and I encounter a variety of home repair problems.

This article will show you how to turn off the bin full indicator on your Roomba by cleaning your bin sensor. Sandra Fauconnier, CC-BY-2.0, via Flickr

In my opinion, Roomba iRobot vacuum cleaners are among the most helpful household appliances ever invented by man.

As multiple pet owners, we really love our Roomba 960. However, when it starts behaving, it can be annoying to try to figure out what is causing it to not function properly.

Why isn’t my Roomba’s bin full indicator going off?

The dreaded “trash can full” error, which causes Roomba not to start cleaning and gives you that sad-sounding “womp womp” sound, is one such problem that can make you scratch your head.

If you’re having trouble getting your Roomba to start cleaning because it’s showing you a “bin full” indicator (the red bin icon) and you’ve already emptied the bin and cleaned the filter, brace yourself a heart. There is probably an easy way to fix this.

I’ve owned a Roomba 960 model for over a year and up until a few days ago all I had to do was empty the bin and change or clean the filter to get it working. However, one day it decided to stop working and the red trash can icon did not go out.

I tried cleaning the case and even removing the battery once before finally asking iRobot’s website for help. There I finally found the solution to Roomba’s garbage full display which I am going to share with you in this article.

How to find Roomba’s bin sensors

Your WiFi-enabled Roomba has sensors located in the vacuum cleaner body and also in the dust bin. There are four sensors in total. These sensors work similarly to the photocells in your garage door, which prevent the door from closing if a person or object is in the way.

The whole time I’ve owned my Roomba 960, I didn’t even know these sensors existed. I suppose I should have read my owner’s manual after I bought it!

Below is a photo of what the sensors in your Roomba’s bin look like.

As you can see we have pet hair in our home and our Roomba is exercised. The sensor in the container is at the end of the pointer in the top right corner of the photo.

How to find Roomba’s other sensors

Aside from the two sensors in Roomba’s bin, there are two in the vacuum’s body. These look like two small black rectangles and protrude from the robot’s chassis where the container slides into the body. See the photo below.

As you can see this sensor is quite dirty and needs cleaning.

How to clean your Roomba’s bin sensor

All you have to do to clean your Roomba’s bin sensors is wipe them with a microfiber cloth or soft cloth towel. After you’ve cleaned them, make sure the filter has been cleared of dirt by firmly tapping the inside rim of your trash can. Then put the bin back in place and Roomba should be ready to start cleaning.

If you’re still getting the bin full error, the issue may be more complex and you may need to return your Roomba to the factory for repair.

However, in most cases, cleaning the bin sensors will resolve this issue.

“It’s also a good idea to buy a new set of rollers every few months, as well as new filters and a fresh sweeping brush.”

More Roomba care tips

Before sending your Roomba to work after cleaning the bin sensors, make sure you remove the twin rollers and remove any hair or debris that may have wrapped around each end where they rotate.

Next, check the little wheel that’s on the front of your Roomba. This wheel will pop out when you pull it up. Remove any hair that has wrapped around its minor axis.

Then check Roomba’s cliff sensors, which are the clear plastic windows on the bottom of the vacuum. Just wipe these down with a microfiber cloth and you should be good to go.

It’s also a good idea to buy a new set of rollers every few months, as well as new filters and a fresh sweeping brush. Thankfully, there are now after-market replacements for Roomba’s rollers, sweeping brush and trash filter that are much more affordable than the OEM products, and the quality seems to be on par. I have purchased this complete set a few times for my own Roomba.

To the best of the author’s knowledge, this content is correct and truthful and does not replace formal and individual advice from a qualified professional.