Are you looking for an answer to the topic “sports afield safe battery replacement“? We answer all your questions at the website Chewathai27.com/ppa in category: Aodaithanhmai.com.vn/ppa/blog. You will find the answer right below.
Table of Contents
Where is battery on Sports Afield safe?
1. The E-Lock on the Sports Afield Haven, Preserve, Tac LZ and Journey Series require 4 x AA alkaline batteries 2. Open the battery compartment located on the interior of the door towards the upper hinge 3. Insert the batteries in the proper orientation and order 4.
What happens if the battery on my safe dies?
Lock Lights Up, but Safe Won’t Open
If your battery is not quite dead yet, the lights or display on your lock could still light up. After entering your combination code, you might still hear the expected beeps and clicks that happen as the safe’s bolt disengages.
Why does my Sports Afield gun safe keep beeping?
The lock is in lock out. Lock out is a security feature that is activated when an incorrect code is entered multiple times. To resolve the issue do not remove the batteries, walk away from the safe and do not push any buttons for 20 minutes.
How do you open a digital safe with a dead battery?
Access the batteries in your safe
Safe with key override: opening up a safe with an override key is fairly simple. Access the override lock, which is usually hidden behind a removable panel beside the keypad. Then, simply replace the battery pack behind the door.
What Happens When the Battery on an Electronic safe Lock Dies?
No panic
The first thing you don’t want to do when dealing with a broken safe or lock is panic. If you’re not exactly sure what the problem is, don’t skip the gun by trying to pry open your safe. If anything, it won’t solve the problem and may cause more damage.
Look for other potential problems
Safe batteries last around 2 years depending on how often you use your machine. If it’s been over 2 years and you haven’t changed your battery, you can expect it to lose power at virtually any moment. Before using your safe, remember to test its functions. High-end electronic safes such as fire and burglary safes will usually indicate a dead battery by a series of prolonged beeps, while lower-end electronic safes will usually not warn you other than to stop opening.
One thing to watch out for is whether your batteries may have died from other reasons such as corrosion or water damage. If this is the case, you can consider a more expensive repair.
Know what type of vault you have
Digital safes come in hundreds of different models, but they can be categorized into three main types.
Key bypass safe: Inexpensive safes or those bought at a large retail store are likely to be these types of machines. They also usually come with a spare key that can be used to unlock the safe in the event the digital lock fails or the batteries run out.
: Low-cost safes or those bought at a large retail store are likely to be these types of machines. They also usually come with a spare key that can be used to unlock the safe in the event the digital lock fails or the batteries run out. Safe with Batteries Behind Keypad: These high-end safes have batteries hidden behind their keypads, which can usually be unlocked by removing screws or simply unlocking the display panel. These types of safes usually indicate when the battery is low, giving you plenty of time to replace them before they fizzle out.
: These high-end safes have batteries hidden behind their keypads, which can usually be unlocked by removing screws or simply unlocking the display panel. These types of safes usually indicate when the battery is low, giving you plenty of time to replace them before they fizzle out. Backup Powered Safe: Some digitally powered safes have an external battery power supply at a point on the keypad. The actual battery is in the vault and behind the door where it is not accessible when closed.
Access the batteries in your safe
Replacing a safe’s batteries depends on what type you have.
Key Bypass Safe: Opening a safe with a bypass key is fairly easy. Access the override lock, typically hidden behind a removable panel next to the keyboard. Then just replace the battery pack behind the door.
Safe with batteries behind the keyboard: Open the latch on the bottom of the keyboard and insert new batteries into the case.
Back-up safe: Without battery power, you cannot physically open such a safe. To give your keypad enough power to enter your code, attach a 9V battery (like those found in smoke detectors) to the connection points. Once opened, you can easily swap out the batteries inside their case.
Contact an expert
If your safe is incredibly sturdy (as it should be), you might be better off hiring a locksmith. Keep in mind that safes can be locked and inaccessible for many other reasons that your expert can diagnose better than you would on your own.
Conclusion
Whatever the issue preventing you from opening your broken safe, we can offer you professional locksmith services in Cincinnati – give us a call! If you are looking for a new or upgraded home safe, start here.
How long do gun safe batteries last?
On average, a typical battery should last one year, but your battery’s lifespan can vary depending on how often you access your safe. We recommend changing batteries annually.
What Happens When the Battery on an Electronic safe Lock Dies?
Why is my safe beeping?
On most higher end electronic safes, the first sign that the safe batteries are dead is usually a longer series of beeps when you input your code or a warning on the display panel if you have one. If you are getting a low battery warning of any sort and if the safe won’t open it is likely that this is the problem.
What Happens When the Battery on an Electronic safe Lock Dies?
That’s a question I get asked a lot!
So here is my definitive guide on how to get into your electronic digital safe when the batteries are dead.
Step 1. Don’t Panic
You can get back into your vault and as long as you follow the steps below, your vault will be undamaged and ready to use again in no time.
Step 2. Check if the batteries are dead and it is not some other problem
With most high-quality electronic safes, the first sign that the safe’s batteries are low is usually a prolonged series of beeps when you enter your code, or a warning on the display panel if it has one. If you get a low battery warning and the safe won’t open, that’s probably the problem.
Cheaper electronic safes may not warn you when the battery is getting low, and the first thing you might know is if the safe won’t open. The batteries can be expected to last up to 2 years depending on usage. So if your battery has been in use for a long time, a dead battery is probably the reason. Batteries left untouched for too long can corrode, which can lead to a much more expensive problem.
Step 3. Find out what kind of digital safe you have
Obviously there are hundreds of models of digital safes, but I’ve broken them down into three categories based on the type of electronic lock the safe has.
Digital lock with override key
If you bought your safe online or from a major retail chain at a great price, it is probably this type of electronic safe with a lock similar to the one pictured above. Your safe comes with a separate key that you can use to open the safe if the electronic lock fails or the batteries run out. Override keys should not be kept in the vault.
Digital lock with batteries behind the keyboard
These high-end locks have the batteries hidden in the keypads, with access to the battery even when the safe is locked (often from below, or the keypad is tilted forward to reveal the batteries). If a safe with this type of lock is running low on battery, you will receive a warning. This might beep when you enter your code or, if you have a display panel, it might show a low battery warning similar to what you would see on a cell phone.
Digital lock with emergency power connection
Locks like the one in the picture above have a connection point for external emergency batteries on the keyboard. The actual battery compartment is inside the safe on the back of the door and cannot be accessed from the outside when the safe is locked.
Step 4. Accessing the batteries in your digital safe
Each vault type requires a different method for replacing dead batteries:
Digital Lock with Override Key – You must use the override key to open the safe. The battery pack is located in the door and the batteries can only be replaced when the safe is open. To access the override lock, there is usually a removable panel on the side of the keyboard. Undoing this will expose the lock for the key to be inserted. If you lost the override key, you will not be able to open the vault. However, due to the less secure nature of these types of key locks, a locksmith can open them for you for a fee.
– You must use the override key to open the safe. The battery pack is located in the door and the batteries can only be replaced when the safe is open. To access the override lock, there is usually a removable panel on the side of the keyboard. Undoing this will expose the lock for the key to be inserted. If you lost the override key, you will not be able to open the vault. However, due to the less secure nature of these types of key locks, a locksmith can open them for you for a fee. Digital lock with batteries behind the keyboard – There is usually an obvious latch somewhere on the keyboard (often at the bottom) that releases the battery case and allows you to see the batteries as in the image below
– There is usually an obvious latch somewhere on the keyboard (often at the bottom) that will uncover the battery compartment and allow you to swap out the batteries as shown in the image below Battery power and the batteries are in the vault. If your batteries are dead you will need to connect a 9v battery (like the ones you get in smoke detectors) to the connection points on the front of the safe, this should provide the power you need to enter your code on the keypad to enter
You have to hold the battery on the connection points while entering your code and opening the door.
Once inside the vault, you can access and replace the dead batteries.
Step 5. When all else fails, turn to the experts
If your digital safe is one of the more secure/rugged choices, or none of the above worked, then it’s probably time to talk to the pros.
With our experienced engineers and nationwide service, we can open your safe for you, regardless of class, denomination or safe brand.
Safes can get stuck for a variety of reasons, not just the batteries. Whatever the issue preventing you from opening your safe, our technicians will quickly diagnose the problem and determine opening options.
If you need help opening your safe, contact us now
Things NOT to do if your safe won’t open
Kick it: While this will make you feel better, it doesn’t help and can further damage the secure locking mechanism. Spray things in the lock: We’ve sprayed all sorts of weird and wonderful things in locks over the years, and none of it helps. Force the lock: Any attempt to force open the safe can result in damage. Safes are designed not to be forced open, so any attempt you make is futile. Drill the lock: If you don’t know what you’re doing, the only guaranteed result of drilling your safe’s lock is that you will never be able to use that lock again.
We can help you open your safe in the most effective and gentle way. Please contact us to arrange a technician to come to you as soon as possible.
Why can’t I open my safe?
There are a handful of reasons your safe won’t open. As outlined above, it could be due to dead batteries, lockout mode or time delay, jammed bolt work, disconnected or damaged wiring, and deactivated code.
What Happens When the Battery on an Electronic safe Lock Dies?
Hold your horses! You need to know why your safe won’t open before contacting a technician. Check these five possible reasons below and see what steps you can take to open it.
1. Dead batteries
If your safe doesn’t open, you might go ballistic, only to later discover that the culprits are the dead batteries. Even your keyboard usually beeps and lights up, so check the batteries first. You may have residual strength, but not enough to pull the boltwork off. If the batteries are completely empty, replace them immediately. Choose branded batteries to ensure the longest possible service life.
2. Lockdown mode or time delay
Keep in mind that if you’ve entered a lot of wrong codes, your home safe may go into a penalty lock mode. If it doesn’t open, wait 10-20 minutes before entering the correct code. Also, your safe may have a time delay, typically ten minutes. In this case you may have to wait before entering your code again.
3. Blocked boltwork
There is a chance your safe has a jammed boltwork. The jam can be the main reason your safe won’t open when you hear the motor trying to pull the boltwork back. What you can do: Press the door firmly a few times to release the boltwork. However, be careful not to press on the keyboard and handle. From there, pull the handle in the opposite direction than you normally would and enter the code.
4. Disconnected or damaged wiring
Another culprit is either disconnected or damaged wiring. With the cables disconnected, remove the keypad and check the cables to see if they are loose. If so, connect them or do a simple fix. If they are intact but not working, chances are they are damaged. If the cables are damaged, you may need to contact a technician.
5. Deactivated Code
Many vault owners tend to neglect this part – your code may have been deactivated. That’s why the safe doesn’t open at all. What you can do is have someone try their code to see if it works. If not, you may need to use a locksmith.
Conclusion
There are a handful of reasons why your safe won’t open. As discussed above, this can be due to dead batteries, lockout mode or time delay, stuck boltwork, disconnected or damaged wiring, and disabled code. Take some of the valuable steps above. If the safe still won’t open, you can ask a locksmith for help.
We have a wide variety of security products as well as locksmith services in Cincinnati. If you are looking for a home safe for sale, get in touch with us today!
Where is the reset button on a digital safe?
Press the reset button on the inner keypad of the safe.
It should be a small, black button with the word “Reset” next to it. Push the button with the end of the hanger. You may hear a beeping sound or the control panel may light up when you press the reset button.
What Happens When the Battery on an Electronic safe Lock Dies?
\u00a9 2022 wikiHow, Inc. All rights reserved. wikiHow, Inc. owns the copyright of this image under US and international copyright laws. This image is not licensed under the Creative Commons license applies to text content and some other images published on the wikiHow website.This image may not be used by any other company without the express written consent of wikiHow, Inc.
<\/p>
<\/p><\/div>“}
Where is the serial number on a Sports Afield gun safe?
Your safe’s serial number can be found at the front of the safe near one of the four corners.
What Happens When the Battery on an Electronic safe Lock Dies?
Electronic Safe Battery Replacement
See some more details on the topic sports afield safe battery replacement here:
SPORTS AFIELD Gun Safe Instruction Manual
1. The E-Lock on the Sports Afield Haven, Preserve, Tac LZ and Journey Series require 4 x AA alkaline batteries 2. Open the battery compartment located …
Source: manuals.plus
Date Published: 7/23/2021
View: 2344
Updated 1/6/16
Installation Gue & Owner’s Manual. Congratulations on the purchase of your new Sports Afield Gun Safe! Our safes are built to the highest quality standard …
Source: a.sellpoint.net
Date Published: 12/15/2022
View: 304
Sports Afield SA6033PRO Full Product Manual Page: 13
Sports Afield SA6033PRO Full Product Manual Page: 13 ; 3. Snap the 9V battery to the connector in the proper orientation. ; 4. Reinstall the key pad by sling …
Source: mans.io
Date Published: 2/13/2022
View: 5193
SOLVED: User manual for sports afield safe – Fixya
sle open the battery cover located just below the keypad. Insert a paper clip or pen point into the small hole in the cover. Push in while sling cover to …
Source: www.fixya.com
Date Published: 11/28/2021
View: 6366
How to reset code on sports afield safe – The Dewa Koh Chang
Digital Fingerprint safe Model 96846 Operation Instructions Diagrams within this manual may not be drawn proportionally. Due to continuing improvements, …
Source: thedewakohchang.com
Date Published: 1/22/2022
View: 6251
SA Consumer Products: Secure Safes for Firearms and …
Sports Afield has a large selection of gun safes, handgun storage and the best biometric safes in the industry. Find a gun safe dealer near you!
Source: www.saproducts.com
Date Published: 3/21/2021
View: 738
Sports Afield – 36 Gun Fire and Waterproof Safe?
A: Hi Bob Pointer, thank you for your interest in a Sports Afield Safe! The push button combination lock is electrical and is battery operated.
Source: www.homedepot.com
Date Published: 11/17/2021
View: 8406
SPORTS AFIELD Gun Safe Instruction Manual
Instruction manual for SPORTS AFIELD models including: gun cabinet
1341893 man1
GUN SAFE | OPERATION MANUAL
the plastic bag with this manual. 1. The Sports Afield Haven, Preserve, Tac LZ and Journey series e-lock requires 4 x AA alkaline batteries. 2. Open the battery compartment on the inside of the door toward the top hinge. 3. Insert the batteries in the correct orientation and order 4. Close the battery door.
File info: application/pdf, 24 pages, 2.04 MB
GUN SAFE | USER MANUAL Please read this information carefully and follow all safety instructions carefully before using your gun safe. Failure to do so will void your warranty. IMPORTANT INFORMATION WARNING PLEASE READ THIS INFORMATION CAREFULLY BEFORE OPERATING YOUR SPORTS AFIELD GUN SAFE. DO NOT LEAVE THIS MANUAL OR ACCESS KEYS IN YOUR SAFE. Thank you for choosing a Sports Afield Gun Safe to protect your valuables. We are committed to securing, organizing and protecting your most important documents, valuables and keepsakes. Your gun safe is built to last a lifetime. However, please understand that the locking mechanism contains precision parts. If you have difficulty opening or closing your gun safe, DO NOT FORCE THE GUN SAFE. This can jam the components in the lock, requiring a vault technician to unlock your safe. This will cause you inconvenience and may result in the claim being rejected. If you have any problems or challenges with your gun safe, please contact us. Many problems can be resolved quickly without having to return the product. Customer Service – (888) 792-4264 1 REGISTRATION Please ensure you register your new gun safe by visiting our website. Locate the Contact Us button at the top right of the home page. Select Registration from the drop down menu OM_GS_0218 www.sportsafieldsafes.com 1 REGISTRATION INFORMATION The information you enter on this page is required in the event that you are unable to access the contents of your Sports Afield Gun Safe Keep this information ready before you call Technical Support: Customer Service – (888) 792-4264 DATE OF PURCHASE: PRICE OF PURCHASE (INCLUDING TAX): MODEL NUMBER: SERIAL NUMBER: LOCATION OF PURCHASE: KEY NUMBER (IF APPLICABLE): OM_GS_0218 www.sportsafieldsafes.com 2 SAFETY AND SECURITY IMPORTANT Follow Always use the correct gun when storing a gun and local laws Consumer Products strongly recommends that you do not store a LOADED handgun in this unit. IMPORTANT Always follow the gun manufacturer’s safety instructions. IMPORTANT The Sports Afield Gun Safe or other firearm storage devices are not a substitute for other safety practices, including educating children about the dangers of firearms. IMPORTANT YOUR GUN SAFE IS ONLY PART OF YOUR OVERALL SAFETY PROTECTION. SA Consumer Products recommends that you keep your gun safe in a closet, office, basement, bedroom, or any other location that is convenient to you but away from prying eyes. Gun safe location is very important and extreme care should be taken in this consideration. NOTICE SA Consumer Products and its distributors of Sports Afield Gun Safes do not endorse, recommend, advise, encourage or condone the possession or use of firearms. We believe that the decision to own or use a firearm is a serious decision that should only be made by an adult who has carefully considered the risks and benefits of such a decision. NOTICE Keep your combination number and keys in a safe place, out of the reach of children. Keep your combination number in a safe place separate from your gun safe. You will need this information along with your proof of purchase to obtain technical support and replacement keys. WARNING The gun safe and safe door are heavy. Always ensure proper installation and do not open the door with the safe on an uneven or unstable floor. Failure to do so could result in serious injury or death. OM_GS_0218 www.sportsafieldsafes.com 3 TABLE OF CONTENTS 2 SECTIONS IMPORTANT INFORMATION …………………………………. .. ………………………………………….. ..1 1 REGISTRATION………………………………………… ………………………………………….. …..1 3 UNDERSTANDING YOUR SAFE ……………………………. …………………………….. 5 4 INSPECTION OF YOUR SAFE ……. …………………………………………… …… ……………………..7 5 UNPACKING…………… …….. …………………………………… ………. ……………………………..7 6 UNDERSTANDING YOUR MODEL NUMBER ……………………………………………….. 7 7 GENERAL E-LOCK OPENING INSTRUCTIONS ………………………………………… ……. ……….8 8 GENERAL E-LOCK BATTERY INSTALLATION…………………… …….. …………………….9 9 GENERAL E-LOCK SECURITY CODE SETUP……… …………………………….. …..10 10 GENERAL E-LOCK QUIET MODE .. ………………… ………………….. ……11 11 INSTALLATION OF ESL5 UL E-LOCK BATTERY …….. ………………………. …………………… .11 12 ESL5 UL E-LOCK OPENING INSTRUCTIONS…………….. …………………. ……………..11 13 SETTING UP THE ESL5 UL E-LOCK SECURITY CODE .. …………………… …………………….. ………12 14 ESL5 UL E-LOCK SLEEP MODE …………………… ………………….. ………………..13 15 SANCTUARY SERIES OPENING INSTRUCTIONS …………………………….. ………….. …………13 16 SANCTUARY SERIES ELECTRIC LOCK BATTERY INSTALLATION …………………… ……. ………….13 17 SETTING UP SANCTUARY SERIES E-LOCK SECURITY CODE …………………… …….. …………14 18 SANCTUARY SERIES ELECTRIC LOCK QUIET MODE ……………… ……… ……………………..14 19 SANCTUARY SERIES RESET AU F THE FACTORY SETTINGS …………………………………15 20 THEFT WARNING ALARM SYSTEM M……… …………………………………. ………. …….15 21 DISASSEMBLING THE TRANSPORT RAIL…………………… ……………. …………………………….. …16 22 TRANSPORTING YOUR SAFE …… ………………….. ………………… ………………………. 17 23 SECURE YOUR SECURITY …………….. ………………………….. …………….. ……………….18 24 LOADING YOUR SAFE…….. ……………… ……………………………. ……………. ……………..19 25 KEEPING SAFE DRY ……………… …………………………….. …………… ………..19 26 HINGES AND INTERNAL MECHANISM ………………… …………. …………………..19 27 LOCKING SCREWS .. ……………….. ………………………….. …………….. ………………..20 28 CLEANING … …………….. …………………………….. …………… ………………………………. .. 20 29 HOW TO RECOVER LOST KEYS …. …….. …………………………………… ………. ……………..20 30 NOTES ……………….. ………….. …………………………….. ……………. …………………. 21 31 WARRANTY ……… ……. ………………………………… …………. …………………………..22 OM_GS_0218 www. sportsafieldsafes.com 4 GETTING STARTED 3 UNDERSTANDING YOUR SAFE Backlit E-Lock OM_GS_0218 www.sportsafieldsafes.com 5 REFERENCE PICTURES. ACTUAL MODEL AND DESIGN MAY VARY OM_GS_0218 www.sportsafieldsafes.com 6 4 INSPECTING YOUR SAFE Inspect your safe for shipping damage as soon as you receive it. If you find any damage, please contact the delivery company (or carrier) immediately. Any damage not found upon delivery must be reported within fifteen (15) days or there will be no recourse. Any damage found at the time of delivery must be resolved with the delivery company and/or your retailer. SA Products does not guarantee damage in transit. 5 UNPACKING WARNING: GUN SAFES ARE HEAVY AND MAY BE UNSTABLE ON UNEVEN FLOORS. PLEASE USE EXTRA CAUTION WHEN HANDLING UNSECURED SAFES. 1. Remove the packaging. If your safe is on shipping feet, you can simply lift the crate up and off the safe once the strapping has been removed. If your safe does not have shipping feet, you will need to carefully remove the box and ensure you do not damage the safe and/or injure yourself. You should have someone stabilize the safe when you remove the box and other packing material from under the safe. 2. Locate and remove the plastic bag hanging from the handle on the front of the safe. Inside you will find the necessary items needed to open your safe. Remove all items and prepare to access your safe for the first time. Congratulations! 6 TO UNDERSTAND YOUR MODEL NUMBER FOR THE SPORTS FIELD MODELS LISTED BELOW, INCLUDING THE HAVEN, PRESERVE, TAC LZ & JOURNEY SERIES SAFES, PLEASE READ Sections 7-10 for safe opening and operation instructions and E-Locks. SA5925H SA5930H SA5942h SA5520P SA5924P SA5932P SA5932PG SA5940P SA5940PG SA7240P SA5520LZ SA6033LZ SA5516J SA5520J SA5524J SA20 SA24 SA36 SA48 SA48GLOSS SA64 SA80 SA6040WP 3B5942H OM_GS_0218 www.sportsafieldsafes.com 7 FOR SPORTS AFIELD MAXIMUM SECURITY SERIES SAFES please refer to sections 11-14 for the ESL5 UL E -Lock opening and operating instructions. SA6028USA SA6028USAGLOSS SA6043USA SA6034USAGLOSS SA6239USA SAS6239USAGLOSS FOR SPORTS AFIELD SANCTUARY SERIES SAFES Please see Sections 15-19 for Safe and E-Lock opening and operating instructions. SA3525S SA5936S OPERATING YOUR SAFE IMPORTANT: Depending on the model number of your safe, the initial opening instructions and battery installation process may vary slightly. Please refer to your specific instructions. 7 GENERAL E-LOCK OPENING INSTRUCTIONS WARNING: Never leave the jumper keys in your safe. You will need the override keys to open your gun safe until you have successfully programmed the electronic lock or the batteries are not replaced in time. 1. Locate the jumper keys in the plastic bag hanging from the front of the gun safe. 2. Carefully remove the electronic keypad from the safe by twisting it counterclockwise. The keyboard can be detached from the locking ring; Let the keyboard hang slightly under the locking ring. 3. Locate the keyhole in the locking ring. Insert the key and turn it clockwise from 9 o’clock to 1 o’clock to unlock. OM_GS_0218 www.sportsafieldsafes.com 8 4. Locate the single spoke in the plastic bag hanging from the front of the safe and attach it to the spindle hub by turning clockwise until secure. Gently turn the handle clockwise until the locking bolts are retracted and you can open the vault door. 5. Inside your safe is a small box with the remaining spokes for a secure grip. Take the spokes out of the packaging and thread them into the corresponding holes in the spindle hub. NOTE FOR DROP GRIP LEVER: Your grip is factory assembled and requires no action on your part. 8 GENERAL E-LOCK BATTERY INSTALLATION IMPORTANT: When opening your safe for the first time, you must use the override key. Once the safe is open, the batteries can be inserted. The batteries are in the plastic bag with this manual. 1. The Sports Afield Haven, Preserve, Tac LZ and Journey series e-lock requires 4 x AA alkaline batteries. 2. Open the battery compartment on the inside of the door toward the top hinge. 3. Insert the batteries in the correct orientation and order 4. Close the battery door. Always make sure you use brand new, fully charged batteries. NOTE: This e-lock will alert you when the batteries are low by flashing the red and green light on the keyboard when any key is pressed. Always test batteries when installing or replacing them. When the red and green lights on the lock face illuminate when a button is pressed, you know the batteries are not fully charged. NOTE: Batteries must be inserted with correct polarity. Exhausted batteries must be removed from the product and disposed of safely. Do not mix old and new batteries. Do not mix alkaline or standard (carbon � zinc) batteries. Do not use rechargeable batteries (nickel � cadmium). OM_GS_0218 www.sportsafieldsafes.com 9 9 GENERAL E-LOCK SECURITY CODE SETUP IMPORTANT: It is necessary to reprogram your gun safe with a new security code that you have personally selected to ensure maximum home security. A security code is a series of keystrokes on the keyboard. An “enter” is a single press of a key/digit. Your security code must be between 3 and 8 digits long. Choose a security code that is easy to use but difficult to guess. A bad example would be 1-1-1-1 or 4-3-2-1-1-2-3-4. Be careful when choosing your security code. You want to be sure that you can operate the device quickly without making an input error. 1. All Sports Afield Haven, Preserve, Tac LZ and Journey series come with a factory preset code of [ 1 5 9 # ]. 2. For Haven series, you need to wake up the keyboard first by pressing any number on the keyboard. Then enter the code [ 1 5 9 # ]. A beep sounds each time you press a button. If the code is entered successfully, you will hear two beeps and the green light will turn on. Open the door by turning the handle clockwise. 3. For all other models, including the Preserve, Tac LZ and Journey series, simply enter the code [ 1 5 9 # ]. A beep sounds each time you press a button. If the code is entered successfully, you will hear two beeps and the green light will turn on. Open the door by turning the handle clockwise. 4. Now, with the door open, turn the handle counter-clockwise to lock and deploy the active deadbolts. 5. Next, on the inside of the safe near the battery compartment, locate the small copper cap. Unscrew and remove the cap. 6. Press and release the reset button. You hear a beep. The yellow light on the e-lock will illuminate to allow you to enter your new code. You can only enter a new code while the yellow light is on. 7. Make sure your latches are in the extended position and enter your new security code (between 3 and 8 digits). 8. Confirm your new security code by pressing the [ * ] icon. 9. DO NOT close the safe door until you have confirmed your new security code at least three times to ensure the code has been saved and you can lock and unlock the door successfully. 10. Replace the copper cap over the reset button and close the door. IMPORTANT: If the code fails, repeat the above steps until your code is accepted. If the wrong security code is entered three times, you will be automatically locked out for 20 seconds before you can try your code again. If 3 more failed attempts are made, the keyboard will be locked for 10 minutes. OM_GS_0218 www.sportsafieldsafes.com 10 NOTE: After entering the correct security code, you have 5 seconds to turn the handle and unlock the door before the locking mechanism will reactivate. 10 GENERAL E-LOCK SILENT MODE 1. To silence the E-lock, enter the code [ * 6 3 3 ]. 2. To turn the sound back on, enter the code [ * 6 6 ]. The Sports Afield Maximum Security Series gun safes do not come with override keys and must be opened with the E-Lock. 1. The ESL5 UL E-lock on Sports Afield Maximum Security Series safes requires a 9V alkaline battery. 2. The battery compartment is located under the keyboard. To access, rotate the keypad to the left to release the e-lock from the locking ring. 3. Snap the 9V battery into the connector in the correct orientation. 4. Reattach the keypad to the retaining ring. 5. The e-lock is ready for programming. NOTE: This ESL5 UL E-lock is equipped to alert you of a low battery by a series of beeps (8 times). If you hear this, the battery needs to be replaced. NOTE: The battery must be inserted with the correct polarity. Exhausted batteries must be removed from the product and disposed of safely. 12 ESL5 UL E-LOCK OPENING INSTRUCTIONS 1. All Sports Afield Maximum Security Series gun safes are supplied with a factory preset code of [ 1 2 3 4 5 6 # ]. 2. Press the [ C ] key followed by the factory preset code [ 1 2 3 4 5 6 # ]. A beep sounds each time you press a button. If the code is entered successfully, you will hear two beeps and the green light will turn on. 3. To open the door, hold the spindle hub and turn it clockwise. 4. Inside the safe, locate the spindle handles and screw them into the corresponding holes on the spindle hub. OM_GS_0218 www.sportsafieldsafes.com 11 13 ESL5 UL E-LOCK SECURITY CODE SETUP IMPORTANT. It is necessary to reprogram your gun safe with a new security code that you have personally chosen to ensure maximum household security. A security code is a series of keystrokes on the keyboard. An “enter” is a single press of a key/digit. You must use a 6-digit security code. Choose a security code that is easy to use but difficult to guess. A bad example of a secure code would be 1-1-1-1-1-1 or 3-2-1-1-2-3. ENSURE YOUR DOOR IS OPEN 1. Locate and squeeze the latch bar located on the door frame near the hinges 2. With the latch bar depressed, pull the latch bolts out by turning the handle counter-clockwise 3. Squeeze the [ C ] key and then [ # ] key. The ESL5 E-Lock will emit a short warbling tone (referred to as a “good combo tone”) and the keypad backlight will flash with the tone. 4. Enter the last known 6-digit code. When setting up your gun safe for the first time, enter the factory preset code [ 1 2 3 4 5 6 # ]. The [ C ] key can be used at any time to clear an input error. 5. Next, enter your new 6-digit security code followed by the [ # ] key. If the input is valid, the warble sound can be heard. 6. Re-enter your new 6-digit security code, followed by the [ # ] key to confirm. The warble tone confirms that the new security code has been successfully programmed. 7. If the code fails, you will hear four short beeps. The keyboard returns to sleep and the process begins again. Repeat the above steps until success. IMPORTANT: DO NOT close the safe door until you have confirmed that your new security code has been entered correctly. Try your new security code at least three times to ensure the code has been saved and you can successfully lock and unlock the door. A NOTICE. To wake up the system, press the [ C ] key before entering a code. OM_GS_0218 www.sportsafieldsafes.com 12 14 ESL5 UL E-LOCK SILENT MODE 1. To mute the E-Lock, press [ C # ] and listen for a short warble. Next, press [ 8 0 # ] and listen for a short warble. Finally, press [ 1 # ] and listen for a long warble. 2. To unmute the E-Lock, press [ C # ] and listen for a short warble. Next, press [ 8 0 # ] and listen for a short warble. Finally, press [ 0 # ] and listen for a long warble. 15 SANCTUARY SERIES OPENING INSTRUCTIONS 1. Locate the override keys in the plastic bag hanging from the front of the safe. 2. Carefully remove the e-lock from the safe by sliding the entire assembly up until the keypad disengages from the two mounting screws on the safe’s door. Carefully let the keyboard hang from the wires. 3. Locate the round keyhole in the safe’s door. Insert and turn the key. 4. To open the safe door, locate the single spoke in the plastic bag hanging from the front of the safe and attach it to the spindle hub by turning clockwise until secure. Gently turn the handle clockwise until the safe door opens. 5. Inside your safe is a small box with the remaining spokes for a secure grip. Take the spokes out of the packaging and thread them into the corresponding holes in the spindle hub. 16 SANCTUARY SERIES E-LOCK BATTERY INSTALLATION 1. The Sanctuary Series safe e-lock requires 4 x AA alkaline batteries. Always make sure you use brand new, fully charged batteries. 2. Open the battery compartment on the back of the E-Lock. 3. Insert the batteries in the correct orientation and order. 4. Reattach the e-lock to the safe door by aligning the keyhole slots on the back of the e-lock with the e-lock mounting screws and sliding down until you feel a tactile click or physical stop. 5. If the e-lock is too loose or too tight when properly installed on the safe door, the e-lock mounting screws can be adjusted by simply tightening or loosening. NOTE: This e-lock will alert you when the batteries are low by flashing the red and amber light on the keypad when any key is pressed. Always test batteries when installing or replacing them. If the red and yellow light on the lock face illuminates when a button is pressed, you know the batteries are not fully charged. OM_GS_0218 www.sportsafieldsafes.com 13 NOTE: Batteries must be installed with correct polarity. Exhausted batteries must be removed from the product and disposed of safely. Do not mix old and new batteries. Do not mix alkaline or standard (carbon + zinc) batteries. Do not use rechargeable batteries (nickel � cadmium). 17 SANCTUARY E-LOCK SERIES SETTING UP A SECURITY CODE IMPORTANT: It is necessary to reprogram your safe with a new security code that you have personally selected to ensure maximum security in the home. BE CAREFUL WHEN SELECTING YOUR SECURITY CODE. YOU WANT TO BE SURE THAT YOU CAN OPERATE THE DEVICE QUICKLY WITHOUT MAKING AN ENTRY MISTAKE. 1. To program your new security code, press the [ 0 ] key followed by the [ * ] symbol six times. Two beeps indicate that the entry is valid. 2. Enter the factory preset code [ 1 5 9 # ]. The yellow light on the e-lock will illuminate to allow you to enter your new code. You can only enter a new code while the yellow light is on. (If you change the code, enter the last security code you used.) 3. Enter your new 3-8 digit security code followed by the [ * ] symbol. A beep indicates that the entry is valid. 4. Re-enter your new 3-8 digit security code followed by the [ * ] symbol. Two beeps indicate that the entry is valid. 5. Confirm your newly entered security code by entering the 3 to 8 digit code followed by [ # ]. If successful, you will hear two beeps and the green light will turn on. 6. DO NOT close the safe door until you have confirmed your new security code at least three times to ensure the code has been saved and you can lock and unlock the door successfully. 7. If the code fails, you will hear three beeps. Repeat the above steps until success. IMPORTANT: If the wrong security code is entered 3 times, you will be automatically locked out for 20 seconds before you can try your code again. If 3 more failed attempts are made, the keyboard will be locked for 10 minutes. 18 SANCTUARY SERIES E-LOCK QUIET MODE 1. To mute the E-Lock, enter the code [ * 6 3 3 ]. 2. To turn the sound back on, enter the code [ * 6 6 ]. OM_GS_0218 www.sportsafieldsafes.com 14 19 RESETTING THE SANCTUARY SERIES TO FACTORY DEFAULTS If you have forgotten your security code you will need to contact the Sports Afield Customer Services team to obtain your safe’s unique reset code. This code resets the safe so that a new security code can be programmed. 1. To reset to factory settings, press the [ 0 ] key followed by the [ * ] symbol six times. Two beeps indicate that the entry is valid. 2. Enter your 8-digit reset code followed by the [ # ] symbol. Two beeps indicate that the entry is valid. 3. The yellow light on the e-lock will illuminate for you to enter your new code. You can only enter a new code while the yellow light is on. 4. Enter your new 3-8 digit security code followed by the [ * ] symbol. A beep indicates that the entry is valid. 5. Re-enter your new 3-8 digit security code followed by the [ * ] symbol. Two beeps indicate that the entry is valid. 6. Confirm your newly entered security code by entering the 3 to 8 digit code followed by the [ # ] symbol. If successful, you will hear two beeps and the green light will turn on. 7. If the code fails, you will hear three beeps. Repeat the above steps until success. 20 ANTI THEFT ALERT ALARM SYSTEM FOR SPORTS AFIELD MODELS LISTED BELOW, INCLUDING THE HAVEN, PRESERVE, TAC LZ, JOURNEY, & SANCTUARY SERIES SAFES SA5925H SA5940P SA5524J SA48GLOSS SA5930H SA5940PG SA3525S SA64 SA5942h SA7240P SA5936S SA80 SA5520P SA5520LZ SA20 SA6040W SA5924P SA6033LZ SA24 3B5942H SA5932P SA5516J SA36 SA5932PG SA5520J SA48 When the anti-theft alarm system is activated, the alarm will sound for 20 seconds if the safe is tampered with. To stop the alarm from sounding, enter your security code or use the override key to open the safe and remove the batteries. 1. To activate, press [ * 0 0 ] to arm the anti-theft alarm system. 2. Each time a correct security code is entered, the alarm will be deactivated. To reactivate, press [ * 0 0 ]. OM_GS_0218 www.sportsafieldsafes.com 15 MOVING AND SECURING 21 REMOVING THE TRANSPORT SKIDS WARNING: WHILE REMOVING THE SCREWS FROM THE SKIDS, ENSURE THAT A PERSON CAN HOLD AND STABILIZE THE SAFE TO PREVENT TIPPING AND INJURY AND/OR DAMAGE TO THE SAFE AND SURROUNDING STRUCTURES. WARNING: BEFORE REMOVING THE TRANSPORT RAILS, ENSURE THE DOOR IS CLOSED AND LOCKED. YOUR SAFE DOOR IS HEAVY AND PRESENTS A SECURITY HAZARD UNTIL THE SAFE IS LATCHED OR PROPERLY SECURED. 1. When you receive your safe, you may find it attached to a shipping rack. The runner is secured from the bottom of the safe with four bolts. Using a wrench or 17 mm (11/16 in.) socket wrench, remove the four screws securing the safe to the skids. removed from the bottom of the safe. 3. While removing the shipping rail from one side of the safe, carefully lower the safe to the floor. 4. Do the same to remove the remaining shipping rail. FOR SPORTS AFIELD MAXIMUM SECURITY SERIES SAFES (see page 8 for specific model numbers) 1. When you receive your safe, you may find it attached to a shipping rail. The drawer is secured from the inside of the safe by four lag screws. 2. Open your gun safe door and locate and remove the four black caps on the safe floor Using a wrench or 14mm socket (9/ 16″). Bringen Sie die vier schwarzen Kappen wieder an. 3. Schließen Sie anschließend die Tür und fahren Sie die Verriegelungsbolzen heraus, indem Sie den Griff gegen den Uhrzeigersinn drehen. Stellen Sie sicher, dass die Tür ordnungsgemäß verriegelt ist, bevor Sie fortfahren . 4. Schieben Sie den Safe mit Unterstützung auf eine Seite der Palette, sodass der Safe über die hintere Kante der Palette hinausragt. Kippen Sie den Tresor vorsichtig um, bis die Unterseite des Tresors den Boden berührt. Kippen Sie den Tresor dann etwas mehr, damit die Palette unter dem Tresor entfernt werden kann. 5. Senken Sie den Tresor vorsichtig wieder ab. OM_GS_0218 www.sportsafieldsafes.com 16 22 TRANSPORT IHRES SAFES WARNUNG: SAFES SIND SEHR SCH WER UND UNKOMPLIZIERT ZU HANDHABEN. BITTE GEHEN SIE HÖCHSTE VORSICHT BEIM TRANSPORT DES SAFES. DER EINSATZ EINES AUSGEBILDETEN PROFESSIONALS MIT RICHTIGER UMZUGSAUSRÜSTUNG WIRD DRINGEND EMPFOHLEN. Der Standort des Waffenschranks ist sehr wichtig, und bei dieser Überlegung sollte äußerste Sorgfalt walten. 1. Um den Feuerschutz Ihres Tresors zu maximieren, empfehlen wir Ihnen, den Tresor in niedrigeren Ebenen in Ihrem Haus aufzustellen, wo die Feuertemperaturen niedriger und entfernt von leicht brennbaren Materialien sind. 2. Um den Einbruchschutz und die Stabilität zu maximieren, wird empfohlen, den Tresor am Boden zu befestigen. 3. Um die Sicherheit im Haushalt zu maximieren, empfehlen wir, Ihren Safe an einem abgelegenen Ort außerhalb der Reichweite und Sichtweite von Kindern aufzustellen. Bewegen Sie den Safe mit einem Transportwagen, der die Größe und das Gewicht Ihres Safes tragen kann, an den gewünschten Ort. Bitte treffen Sie alle notwendigen Vorkehrungen, um Ihren Bodenbelag zu schützen und Schäden zu vermeiden. HILFREICH: UM ZU BESTIMMEN, OB IHR SAFE DURCH TÜREN, TREPPEN ODER ECKEN SCHAFFT, NEHMEN SIE DEN LEEREN SAFE-SCHACHTEL UND PRÜFEN, OB ER BIS ZU SEINEM ENDGÜLTIGEN AUFSTELLORT PASST. 1. Der Safe sollte neben einer Seitenwand mit minimalem Platz auf beiden Seiten des Safes installiert werden. Der Tresor sollte möglichst flach an Wand und Boden anliegen. Entfernen Sie bei Bedarf die Sockelleiste und/oder die Wandverkleidung. 2. Nähe und Standort von Steckdosen sollten bei der Installation von Waffenschränken mit Stromversorgung berücksichtigt werden. 3. Stellen Sie immer sicher, dass sich der Tresor in einem isolierten und trockenen Bereich befindet. Stellen Sie den Tresor niemals in direkten Kontakt mit einem nassen Boden. Bei der Installation Ihres Tresors auf einem Betonboden wird die Verwendung einer Feuchtigkeits-/Schutzbarriere dringend empfohlen. Andernfalls oder wenn der Tresor Chemikalien oder anderen widrigen Umgebungen ausgesetzt wird, kann die Garantie erlöschen. 4. Wenn Ihr Safe uneben erscheint, müssen Sie möglicherweise den Boden des Safes unterlegen, um zu verhindern, dass die Tür zu schnell aufschwingt oder sich selbst schließt. OM_GS_0218 www.sportsafieldsafes.com 17 23 SICHERN IHRES SAFES WARNUNG: IHR SAFE IST SO ENTWICKELT, DASS ES SICH SELBST STÜTZT, WENN DIE TÜR GEÖFFNET WIRD. JEDOCH SOLLTE VORSICHT GEBRACHT WERDEN, UM UMKIPPEN UND SICHERHEITSGEFAHREN ZU VERMEIDEN. DER SAFE MUSS AM BODEN BEFESTIGT WERDEN. Andernfalls wird die Sicherheit und der Schutz des Safes beeinträchtigt. FÜR SPORTS AFIELD HAVEN, PRESEVER, TAC LZ, JOURENY & SANCTUARY SERIES SAFES (siehe Seite 7 & 8 für bestimmte Modellnummern) WERKZEUGE ZUM BOLZEN DES SAFES AN EINER BETONOBERFLÄCHE BOHRER/HAMMERBOHRER BOHRER 1/2″ (zum Einbau in Beton mit mitgelieferten Kleinteilen) SCHRAUBENSCHLÜSSEL / 11/16″ (17MM) STECKHAMMER 1. Verwenden Sie die mitgelieferten Kleinteile oder fragen Sie Ihren Eisenwarenhändler nach Befestigungsteilen für Ihre spezielle Montagefläche. 2. Öffnen Sie die Tür Ihres Waffentresors und suchen und entfernen Sie die vier schwarzen Kappen auf dem Tresorboden. Dadurch erhalten Sie Zugang zu den werkseitig gebohrten Schraubenlöchern. 3. Um Ihren Tresor am Boden zu befestigen, müssen Sie zunächst Löcher in die Bodenfläche bohren. 4. Bohren Sie den geeigneten Durchmesser und die richtige Tiefe der Vorbohrungen basierend auf der Art der verwendeten Hardware und der Art der Bodenoberfläche. Für die mitgelieferte Hardware (Betonbodeninstallation) empfehlen wir die Verwendung eines Bohrhammers und eines 1/2″-Betonbohrers, um die vier entsprechenden Löcher in den Betonboden zu bohren 6. Sichern Sie den Tresor, indem Sie alle 4 Ankerbolzen durch die werkseitig gebohrten Bolzenlöcher im Boden des Tresors schrauben und fest anziehen Unterlegscheibe sitzt oben auf der Gummiunterlegscheibe. Ziehen Sie die Schraube fest, um die Gummiunterlegscheibe zwischen dem Tresor und der Metallunterlegscheibe zusammenzudrücken. Andernfalls kann im Falle einer Überschwemmung Wasser in den Tresor eindringen. Tresore der Journey-Serie enthalten kein Gummi washers. 7. Replace the four black caps onto the floor of the safe. The SPORTS AFIELD MAXIMUM SECURITY SERIES SAFES (see page 8 for specific model numbers) do not come with hardware. Consult your local hardware retailer for fastening hardware specific t o your mounting surface and location. Follow the same steps above adjusting the drill diamet er and depth of pilot hole based on the selected fastening hardware. OM_GS_0218 www.sportsafieldsafes.com 18 USE AND MAINTENANCE 24 LOADING YOUR SAFE 1. When loading guns into your safe, make sure they rest securely against the cutouts provided in the gun racks to prevent accidental tipping when the door is closed. 2. Store documents or heat sensitive items in the bottom of the safe for greatest protection against fire damage. 3. Store ammunition separately from valuables. 4. Do not put anything in your safe that will put pressure against the door when it is closed. 5. Select safe models have reinforced shelving but as a good safety precaution store heavier items either on the floor of the safe or away from the middle of the shelves. 25 KEEPING SAFE DRY We recommend placing a moisture/protective barrier between your safe and concrete floor to prevent any moisture, mildew and rust damage the safe. Installing your safe in a place with climate control (heat in the winter and cooling in the summer) is highly recommended. In areas of high humidity or frequent temperature fluctuations (garages) it is recommend to take appropriate precautions to ward against moisture damage. We strongly encourage the use an internal dehumidifier and/or desiccants to protect your contents from rust or mildew. Internal dehumidifiers should not be in direct contact with the side or back walls. 26 HINGES AND INTERNAL MECHANISM The hinges and internal locking mechanism are permanently lubricated, thus needing no maintenance. Opening the door panel of your safe may void your warranty. Always consult our customer service experts prior to doing so. OM_GS_0218 www.sportsafieldsafes.com 19 27 LOCKING BOLTS Occasionally it may be necessary to lubricate the active locking bolts. To do so, with the door open, extend the locking bolts completely. Wipe a small amount of oil/lubricant around each locking bolt. 28 CLEANING To clean the surface of your safe, use a soft, non-abrasive cloth (we recommend lint free polishing cloths). DO NOT use paper towels as you may scratch, mar or damage the finish of your safe. Often water is sufficient for cleaning the surface of your safe, however, an ammonia free window cleaner can be used. DO NOT use metal polishes or solvents when cleaning. 29 HOW TO OBTAIN LOST KEYS To request replacement override keys, please contact our customer service team using the number below. Please have all registration information available prior to calling. Customer Service – (888) 792-4264 OM_GS_0218 www.sportsafieldsafes.com 20 30 NOTES OM_GS_0218 www.sportsafieldsafes.com 21 31 WARRANTY SA Consumer Products, Inc. will repair or replace, at their sole discretion, any Sports Afield Gun Safe damaged by fire, forced entry, forced attack or natural flood for the lifetime of the original owner. SA Consumer Products, Inc. will repair or replace, at their sole discretion, any Sports Afield Gun Safe with defective parts, paint or lock for the lifetime of the original owner. If SA Consumer Products, Inc. deems a replacement safe is to be sent, they will pay the freight costs to ship the replacement safe to the original owner. This lifetime warranty is limited to the safe and expressly excludes any loss associated with the contents of the safe. SA Consumer Products, Inc. reserves the right to receive full evidence of your misfortune, such as a police report and/or homeowner’s statement of coverage. This warranty is not valid outside of the United States and Canada. Proof of registration and copy of sales receipt must be on file at the time of claim. Visit our website at www.sportsafieldsafes,com to register your safe. Lifetime warranty only applies to the original owner of the safe. SA Consumer Products, Inc. shall only be responsible and liable when the safe is used in compliance with the directions specified in your new Sports Afield Safe Owner’s Manual. SA Consumer Products, Inc. requires that specific guidelines be followed for repair. The safe will be repaired in-home if possible (to include parts and labor); however, if factory replacement is necessary (at SA Consumer Products, Inc.’s sole discretion), the replacement will be shipped freight prepaid, curbside delivery. This warranty is inclusive and is in lieu of any and all other warranties, express or implied. Specifically excluded are the warranties of merchantability and fitness for a particular purpose. This warranty is limited to the safe itself and/or its value and does not include consequential damages of any kind including, but not limited to, the contents in and of the safe. OM_GS_0218 www.sportsafieldsafes.com 22 If you have a question about your Sports Afield Gun Safe, call the SA Customer Service team with your registration information. For any additional information please visit our website www.sportsafieldsafes.com Thank you for choosing a Sports Afield Gun Safe. Your gun safe is built to protect your for a lifetime. However, please understand that your gun safe has precision parts. If you experience ANY difficulty opening or closing your gun safe, contact the SA Customer Service team first. DO NOT FORCE THE GUN SAFE OPEN. Doing so may jam the components in the lock, which will require a safe technician to unlock your safe. This will cause an inconvenience to you and may lead to a claim denial. OM-GS-0218
references
PDFium PDFium
SPORTS AFIELD Gun Safe Instruction Manual
Instruction manual for SPORTS AFIELD models including: gun cabinet
1341893 man1
GUN SAFE | OPERATION MANUAL
the plastic bag with this manual. 1. The Sports Afield Haven, Preserve, Tac LZ and Journey series e-lock requires 4 x AA alkaline batteries. 2. Open the battery compartment on the inside of the door toward the top hinge. 3. Insert the batteries in the correct orientation and order 4. Close the battery door.
File info: application/pdf, 24 pages, 2.04 MB
GUN SAFE | USER MANUAL Please read this information carefully and follow all safety instructions carefully before using your gun safe. Failure to do so will void your warranty. IMPORTANT INFORMATION WARNING PLEASE READ THIS INFORMATION CAREFULLY BEFORE OPERATING YOUR SPORTS AFIELD GUN SAFE. DO NOT LEAVE THIS MANUAL OR ACCESS KEYS IN YOUR SAFE. Thank you for choosing a Sports Afield Gun Safe to protect your valuables. We are committed to securing, organizing and protecting your most important documents, valuables and keepsakes. Your gun safe is built to last a lifetime. However, please understand that the locking mechanism contains precision parts. If you have difficulty opening or closing your gun safe, DO NOT FORCE THE GUN SAFE. This can jam the components in the lock, requiring a vault technician to unlock your safe. This will cause you inconvenience and may result in the claim being rejected. If you have any problems or challenges with your gun safe, please contact us. Many problems can be resolved quickly without having to return the product. Customer Service – (888) 792-4264 1 REGISTRATION Please ensure you register your new gun safe by visiting our website. Locate the Contact Us button at the top right of the home page. Select Registration from the drop down menu OM_GS_0218 www.sportsafieldsafes.com 1 REGISTRATION INFORMATION The information you enter on this page is required in the event that you are unable to access the contents of your Sports Afield Gun Safe Keep this information ready before you call Technical Support: Customer Service – (888) 792-4264 DATE OF PURCHASE: PRICE OF PURCHASE (INCLUDING TAX): MODEL NUMBER: SERIAL NUMBER: LOCATION OF PURCHASE: KEY NUMBER (IF APPLICABLE): OM_GS_0218 www.sportsafieldsafes.com 2 SAFETY AND SECURITY IMPORTANT Follow Always use the correct gun when storing a gun and local laws Consumer Products strongly recommends that you do not store a LOADED handgun in this unit. IMPORTANT Always follow the gun manufacturer’s safety instructions. IMPORTANT The Sports Afield Gun Safe or other firearm storage devices are not a substitute for other safety practices, including educating children about the dangers of firearms. IMPORTANT YOUR GUN SAFE IS ONLY PART OF YOUR OVERALL SAFETY PROTECTION. SA Consumer Products recommends that you keep your gun safe in a closet, office, basement, bedroom, or any other location that is convenient to you but away from prying eyes. Gun safe location is very important and extreme care should be taken in this consideration. NOTICE SA Consumer Products and its distributors of Sports Afield Gun Safes do not endorse, recommend, advise, encourage or condone the possession or use of firearms. We believe that the decision to own or use a firearm is a serious decision that should only be made by an adult who has carefully considered the risks and benefits of such a decision. NOTICE Keep your combination number and keys in a safe place, out of the reach of children. Keep your combination number in a safe place separate from your gun safe. You will need this information along with your proof of purchase to obtain technical support and replacement keys. WARNING The gun safe and safe door are heavy. Always ensure proper installation and do not open the door with the safe on an uneven or unstable floor. Failure to do so could result in serious injury or death. OM_GS_0218 www.sportsafieldsafes.com 3 TABLE OF CONTENTS 2 SECTIONS IMPORTANT INFORMATION …………………………………. .. ………………………………………….. ..1 1 REGISTRATION………………………………………… ………………………………………….. …..1 3 UNDERSTANDING YOUR SAFE ……………………………. …………………………….. 5 4 INSPECTION OF YOUR SAFE ……. …………………………………………… …… ……………………..7 5 UNPACKING…………… …….. …………………………………… ………. ……………………………..7 6 UNDERSTANDING YOUR MODEL NUMBER ……………………………………………….. 7 7 GENERAL E-LOCK OPENING INSTRUCTIONS ………………………………………… ……. ……….8 8 GENERAL E-LOCK BATTERY INSTALLATION…………………… …….. …………………….9 9 GENERAL E-LOCK SECURITY CODE SETUP……… …………………………….. …..10 10 GENERAL E-LOCK QUIET MODE .. ………………… ………………….. ……11 11 INSTALLATION OF ESL5 UL E-LOCK BATTERY …….. ………………………. …………………… .11 12 ESL5 UL E-LOCK OPENING INSTRUCTIONS…………….. …………………. ……………..11 13 SETTING UP THE ESL5 UL E-LOCK SECURITY CODE .. …………………… …………………….. ………12 14 ESL5 UL E-LOCK SLEEP MODE …………………… ………………….. ………………..13 15 SANCTUARY SERIES OPENING INSTRUCTIONS …………………………….. ………….. …………13 16 SANCTUARY SERIES ELECTRIC LOCK BATTERY INSTALLATION …………………… ……. ………….13 17 SETTING UP SANCTUARY SERIES E-LOCK SECURITY CODE …………………… …….. …………14 18 SANCTUARY SERIES ELECTRIC LOCK QUIET MODE ……………… ……… ……………………..14 19 SANCTUARY SERIES RESET AU F THE FACTORY SETTINGS …………………………………15 20 THEFT WARNING ALARM SYSTEM M……… …………………………………. ………. …….15 21 DISASSEMBLING THE TRANSPORT RAIL…………………… ……………. …………………………….. …16 22 TRANSPORTING YOUR SAFE …… ………………….. ………………… ………………………. 17 23 SECURE YOUR SECURITY …………….. ………………………….. …………….. ……………….18 24 LOADING YOUR SAFE…….. ……………… ……………………………. ……………. ……………..19 25 KEEPING SAFE DRY ……………… …………………………….. …………… ………..19 26 HINGES AND INTERNAL MECHANISM ………………… …………. …………………..19 27 LOCKING SCREWS .. ……………….. ………………………….. …………….. ………………..20 28 CLEANING … …………….. …………………………….. …………… ………………………………. .. 20 29 HOW TO RECOVER LOST KEYS …. …….. …………………………………… ………. ……………..20 30 NOTES ……………….. ………….. …………………………….. ……………. …………………. 21 31 WARRANTY ……… ……. ………………………………… …………. …………………………..22 OM_GS_0218 www. sportsafieldsafes.com 4 GETTING STARTED 3 UNDERSTANDING YOUR SAFE Backlit E-Lock OM_GS_0218 www.sportsafieldsafes.com 5 REFERENCE PICTURES. ACTUAL MODEL AND DESIGN MAY VARY OM_GS_0218 www.sportsafieldsafes.com 6 4 INSPECTING YOUR SAFE Inspect your safe for shipping damage as soon as you receive it. If you find any damage, please contact the delivery company (or carrier) immediately. Any damage not found upon delivery must be reported within fifteen (15) days or there will be no recourse. Any damage found at the time of delivery must be resolved with the delivery company and/or your retailer. SA Products does not guarantee damage in transit. 5 UNPACKING WARNING: GUN SAFES ARE HEAVY AND MAY BE UNSTABLE ON UNEVEN FLOORS. PLEASE USE EXTRA CAUTION WHEN HANDLING UNSECURED SAFES. 1. Remove the packaging. If your safe is on shipping feet, you can simply lift the crate up and off the safe once the strapping has been removed. If your safe does not have shipping feet, you will need to carefully remove the box and ensure you do not damage the safe and/or injure yourself. You should have someone stabilize the safe when you remove the box and other packing material from under the safe. 2. Locate and remove the plastic bag hanging from the handle on the front of the safe. Inside you will find the necessary items needed to open your safe. Remove all items and prepare to access your safe for the first time. Congratulations! 6 TO UNDERSTAND YOUR MODEL NUMBER FOR THE SPORTS FIELD MODELS LISTED BELOW, INCLUDING THE HAVEN, PRESERVE, TAC LZ & JOURNEY SERIES SAFES, PLEASE READ Sections 7-10 for safe opening and operation instructions and E-Locks. SA5925H SA5930H SA5942h SA5520P SA5924P SA5932P SA5932PG SA5940P SA5940PG SA7240P SA5520LZ SA6033LZ SA5516J SA5520J SA5524J SA20 SA24 SA36 SA48 SA48GLOSS SA64 SA80 SA6040WP 3B5942H OM_GS_0218 www.sportsafieldsafes.com 7 FOR SPORTS AFIELD MAXIMUM SECURITY SERIES SAFES please refer to sections 11-14 for the ESL5 UL E -Lock opening and operating instructions. SA6028USA SA6028USAGLOSS SA6043USA SA6034USAGLOSS SA6239USA SAS6239USAGLOSS FOR SPORTS AFIELD SANCTUARY SERIES SAFES Please see Sections 15-19 for Safe and E-Lock opening and operating instructions. SA3525S SA5936S OPERATING YOUR SAFE IMPORTANT: Depending on the model number of your safe, the initial opening instructions and battery installation process may vary slightly. Please refer to your specific instructions. 7 GENERAL E-LOCK OPENING INSTRUCTIONS WARNING: Never leave the jumper keys in your safe. You will need the override keys to open your gun safe until you have successfully programmed the electronic lock or the batteries are not replaced in time. 1. Locate the jumper keys in the plastic bag hanging from the front of the gun safe. 2. Carefully remove the electronic keypad from the safe by twisting it counterclockwise. The keyboard can be detached from the locking ring; Let the keyboard hang slightly under the locking ring. 3. Locate the keyhole in the locking ring. Insert the key and turn it clockwise from 9 o’clock to 1 o’clock to unlock. OM_GS_0218 www.sportsafieldsafes.com 8 4. Locate the single spoke in the plastic bag hanging from the front of the safe and attach it to the spindle hub by turning clockwise until secure. Gently turn the handle clockwise until the locking bolts are retracted and you can open the vault door. 5. Inside your safe is a small box with the remaining spokes for a secure grip. Take the spokes out of the packaging and thread them into the corresponding holes in the spindle hub. NOTE FOR DROP GRIP LEVER: Your grip is factory assembled and requires no action on your part. 8 GENERAL E-LOCK BATTERY INSTALLATION IMPORTANT: When opening your safe for the first time, you must use the override key. Once the safe is open, the batteries can be inserted. The batteries are in the plastic bag with this manual. 1. The Sports Afield Haven, Preserve, Tac LZ and Journey series e-lock requires 4 x AA alkaline batteries. 2. Open the battery compartment on the inside of the door toward the top hinge. 3. Insert the batteries in the correct orientation and order 4. Close the battery door. Always make sure you use brand new, fully charged batteries. NOTE: This e-lock will alert you when the batteries are low by flashing the red and green light on the keyboard when any key is pressed. Always test batteries when installing or replacing them. When the red and green lights on the lock face illuminate when a button is pressed, you know the batteries are not fully charged. NOTE: Batteries must be inserted with correct polarity. Exhausted batteries must be removed from the product and disposed of safely. Do not mix old and new batteries. Do not mix alkaline or standard (carbon � zinc) batteries. Do not use rechargeable batteries (nickel � cadmium). OM_GS_0218 www.sportsafieldsafes.com 9 9 GENERAL E-LOCK SECURITY CODE SETUP IMPORTANT: It is necessary to reprogram your gun safe with a new security code that you have personally selected to ensure maximum home security. A security code is a series of keystrokes on the keyboard. An “enter” is a single press of a key/digit. Your security code must be between 3 and 8 digits long. Choose a security code that is easy to use but difficult to guess. A bad example would be 1-1-1-1 or 4-3-2-1-1-2-3-4. Be careful when choosing your security code. You want to be sure that you can operate the device quickly without making an input error. 1. All Sports Afield Haven, Preserve, Tac LZ and Journey series come with a factory preset code of [ 1 5 9 # ]. 2. For Haven series, you need to wake up the keyboard first by pressing any number on the keyboard. Then enter the code [ 1 5 9 # ]. A beep sounds each time you press a button. If the code is entered successfully, you will hear two beeps and the green light will turn on. Open the door by turning the handle clockwise. 3. For all other models, including the Preserve, Tac LZ and Journey series, simply enter the code [ 1 5 9 # ]. A beep sounds each time you press a button. If the code is entered successfully, you will hear two beeps and the green light will turn on. Open the door by turning the handle clockwise. 4. Now, with the door open, turn the handle counter-clockwise to lock and deploy the active deadbolts. 5. Next, on the inside of the safe near the battery compartment, locate the small copper cap. Unscrew and remove the cap. 6. Press and release the reset button. You hear a beep. The yellow light on the e-lock will illuminate to allow you to enter your new code. You can only enter a new code while the yellow light is on. 7. Make sure your latches are in the extended position and enter your new security code (between 3 and 8 digits). 8. Confirm your new security code by pressing the [ * ] icon. 9. DO NOT close the safe door until you have confirmed your new security code at least three times to ensure the code has been saved and you can lock and unlock the door successfully. 10. Replace the copper cap over the reset button and close the door. IMPORTANT: If the code fails, repeat the above steps until your code is accepted. If the wrong security code is entered three times, you will be automatically locked out for 20 seconds before you can try your code again. If 3 more failed attempts are made, the keyboard will be locked for 10 minutes. OM_GS_0218 www.sportsafieldsafes.com 10 NOTE: After entering the correct security code, you have 5 seconds to turn the handle and unlock the door before the locking mechanism will reactivate. 10 GENERAL E-LOCK SILENT MODE 1. To silence the E-lock, enter the code [ * 6 3 3 ]. 2. To turn the sound back on, enter the code [ * 6 6 ]. The Sports Afield Maximum Security Series gun safes do not come with override keys and must be opened with the E-Lock. 1. The ESL5 UL E-lock on Sports Afield Maximum Security Series safes requires a 9V alkaline battery. 2. The battery compartment is located under the keyboard. To access, rotate the keypad to the left to release the e-lock from the locking ring. 3. Snap the 9V battery into the connector in the correct orientation. 4. Reattach the keypad to the retaining ring. 5. The e-lock is ready for programming. NOTE: This ESL5 UL E-lock is equipped to alert you of a low battery by a series of beeps (8 times). If you hear this, the battery needs to be replaced. NOTE: The battery must be inserted with the correct polarity. Exhausted batteries must be removed from the product and disposed of safely. 12 ESL5 UL E-LOCK OPENING INSTRUCTIONS 1. All Sports Afield Maximum Security Series gun safes are supplied with a factory preset code of [ 1 2 3 4 5 6 # ]. 2. Press the [ C ] key followed by the factory preset code [ 1 2 3 4 5 6 # ]. A beep sounds each time you press a button. If the code is entered successfully, you will hear two beeps and the green light will turn on. 3. To open the door, hold the spindle hub and turn it clockwise. 4. Inside the safe, locate the spindle handles and screw them into the corresponding holes on the spindle hub. OM_GS_0218 www.sportsafieldsafes.com 11 13 ESL5 UL E-LOCK SECURITY CODE SETUP IMPORTANT. It is necessary to reprogram your gun safe with a new security code that you have personally chosen to ensure maximum household security. A security code is a series of keystrokes on the keyboard. An “enter” is a single press of a key/digit. You must use a 6-digit security code. Choose a security code that is easy to use but difficult to guess. A bad example of a secure code would be 1-1-1-1-1-1 or 3-2-1-1-2-3. ENSURE YOUR DOOR IS OPEN 1. Locate and squeeze the latch bar located on the door frame near the hinges 2. With the latch bar depressed, pull the latch bolts out by turning the handle counter-clockwise 3. Squeeze the [ C ] key and then [ # ] key. The ESL5 E-Lock will emit a short warbling tone (referred to as a “good combo tone”) and the keypad backlight will flash with the tone. 4. Enter the last known 6-digit code. When setting up your gun safe for the first time, enter the factory preset code [ 1 2 3 4 5 6 # ]. The [ C ] key can be used at any time to clear an input error. 5. Next, enter your new 6-digit security code followed by the [ # ] key. If the input is valid, the warble sound can be heard. 6. Re-enter your new 6-digit security code, followed by the [ # ] key to confirm. The warble tone confirms that the new security code has been successfully programmed. 7. If the code fails, you will hear four short beeps. The keyboard returns to sleep and the process begins again. Repeat the above steps until success. IMPORTANT: DO NOT close the safe door until you have confirmed that your new security code has been entered correctly. Try your new security code at least three times to ensure the code has been saved and you can successfully lock and unlock the door. A NOTICE. To wake up the system, press the [ C ] key before entering a code. OM_GS_0218 www.sportsafieldsafes.com 12 14 ESL5 UL E-LOCK SILENT MODE 1. To mute the E-Lock, press [ C # ] and listen for a short warble. Next, press [ 8 0 # ] and listen for a short warble. Finally, press [ 1 # ] and listen for a long warble. 2. To unmute the E-Lock, press [ C # ] and listen for a short warble. Next, press [ 8 0 # ] and listen for a short warble. Finally, press [ 0 # ] and listen for a long warble. 15 SANCTUARY SERIES OPENING INSTRUCTIONS 1. Locate the override keys in the plastic bag hanging from the front of the safe. 2. Carefully remove the e-lock from the safe by sliding the entire assembly up until the keypad disengages from the two mounting screws on the safe’s door. Carefully let the keyboard hang from the wires. 3. Locate the round keyhole in the safe’s door. Insert and turn the key. 4. To open the safe door, locate the single spoke in the plastic bag hanging from the front of the safe and attach it to the spindle hub by turning clockwise until secure. Gently turn the handle clockwise until the safe door opens. 5. Inside your safe is a small box with the remaining spokes for a secure grip. Take the spokes out of the packaging and thread them into the corresponding holes in the spindle hub. 16 SANCTUARY SERIES E-LOCK BATTERY INSTALLATION 1. The Sanctuary Series safe e-lock requires 4 x AA alkaline batteries. Always make sure you use brand new, fully charged batteries. 2. Open the battery compartment on the back of the E-Lock. 3. Insert the batteries in the correct orientation and order. 4. Reattach the e-lock to the safe door by aligning the keyhole slots on the back of the e-lock with the e-lock mounting screws and sliding down until you feel a tactile click or physical stop. 5. If the e-lock is too loose or too tight when properly installed on the safe door, the e-lock mounting screws can be adjusted by simply tightening or loosening. NOTE: This e-lock will alert you when the batteries are low by flashing the red and amber light on the keypad when any key is pressed. Always test batteries when installing or replacing them. If the red and yellow light on the lock face illuminates when a button is pressed, you know the batteries are not fully charged. OM_GS_0218 www.sportsafieldsafes.com 13 NOTE: Batteries must be installed with correct polarity. Exhausted batteries must be removed from the product and disposed of safely. Do not mix old and new batteries. Do not mix alkaline or standard (carbon + zinc) batteries. Do not use rechargeable batteries (nickel � cadmium). 17 SANCTUARY E-LOCK SERIES SETTING UP A SECURITY CODE IMPORTANT: It is necessary to reprogram your safe with a new security code that you have personally selected to ensure maximum security in the home. BE CAREFUL WHEN SELECTING YOUR SECURITY CODE. YOU WANT TO BE SURE THAT YOU CAN OPERATE THE DEVICE QUICKLY WITHOUT MAKING AN ENTRY MISTAKE. 1. To program your new security code, press the [ 0 ] key followed by the [ * ] symbol six times. Two beeps indicate that the entry is valid. 2. Enter the factory preset code [ 1 5 9 # ]. The yellow light on the e-lock will illuminate to allow you to enter your new code. You can only enter a new code while the yellow light is on. (If you change the code, enter the last security code you used.) 3. Enter your new 3-8 digit security code followed by the [ * ] symbol. A beep indicates that the entry is valid. 4. Re-enter your new 3-8 digit security code followed by the [ * ] symbol. Two beeps indicate that the entry is valid. 5. Confirm your newly entered security code by entering the 3 to 8 digit code followed by [ # ]. If successful, you will hear two beeps and the green light will turn on. 6. DO NOT close the safe door until you have confirmed your new security code at least three times to ensure the code has been saved and you can lock and unlock the door successfully. 7. If the code fails, you will hear three beeps. Repeat the above steps until success. IMPORTANT: If the wrong security code is entered 3 times, you will be automatically locked out for 20 seconds before you can try your code again. If 3 more failed attempts are made, the keyboard will be locked for 10 minutes. 18 SANCTUARY SERIES E-LOCK QUIET MODE 1. To mute the E-Lock, enter the code [ * 6 3 3 ]. 2. To turn the sound back on, enter the code [ * 6 6 ]. OM_GS_0218 www.sportsafieldsafes.com 14 19 RESETTING THE SANCTUARY SERIES TO FACTORY DEFAULTS If you have forgotten your security code you will need to contact the Sports Afield Customer Services team to obtain your safe’s unique reset code. This code resets the safe so that a new security code can be programmed. 1. To reset to factory settings, press the [ 0 ] key followed by the [ * ] symbol six times. Two beeps indicate that the entry is valid. 2. Enter your 8-digit reset code followed by the [ # ] symbol. Two beeps indicate that the entry is valid. 3. The yellow light on the e-lock will illuminate for you to enter your new code. You can only enter a new code while the yellow light is on. 4. Enter your new 3-8 digit security code followed by the [ * ] symbol. A beep indicates that the entry is valid. 5. Re-enter your new 3-8 digit security code followed by the [ * ] symbol. Two beeps indicate that the entry is valid. 6. Confirm your newly entered security code by entering the 3 to 8 digit code followed by the [ # ] symbol. If successful, you will hear two beeps and the green light will turn on. 7. If the code fails, you will hear three beeps. Repeat the above steps until success. 20 ANTI THEFT ALERT ALARM SYSTEM FOR SPORTS AFIELD MODELS LISTED BELOW, INCLUDING THE HAVEN, PRESERVE, TAC LZ, JOURNEY, & SANCTUARY SERIES SAFES SA5925H SA5940P SA5524J SA48GLOSS SA5930H SA5940PG SA3525S SA64 SA5942h SA7240P SA5936S SA80 SA5520P SA5520LZ SA20 SA6040W SA5924P SA6033LZ SA24 3B5942H SA5932P SA5516J SA36 SA5932PG SA5520J SA48 When the anti-theft alarm system is activated, the alarm will sound for 20 seconds if the safe is tampered with. To stop the alarm from sounding, enter your security code or use the override key to open the safe and remove the batteries. 1. To activate, press [ * 0 0 ] to arm the anti-theft alarm system. 2. Each time a correct security code is entered, the alarm will be deactivated. To reactivate, press [ * 0 0 ]. OM_GS_0218 www.sportsafieldsafes.com 15 MOVING AND SECURING 21 REMOVING THE TRANSPORT SKIDS WARNING: WHILE REMOVING THE SCREWS FROM THE SKIDS, ENSURE THAT A PERSON CAN HOLD AND STABILIZE THE SAFE TO PREVENT TIPPING AND INJURY AND/OR DAMAGE TO THE SAFE AND SURROUNDING STRUCTURES. WARNING: BEFORE REMOVING THE TRANSPORT RAILS, ENSURE THE DOOR IS CLOSED AND LOCKED. YOUR SAFE DOOR IS HEAVY AND PRESENTS A SECURITY HAZARD UNTIL THE SAFE IS LATCHED OR PROPERLY SECURED. 1. When you receive your safe, you may find it attached to a shipping rack. The runner is secured from the bottom of the safe with four bolts. Using a wrench or 17 mm (11/16 in.) socket wrench, remove the four screws securing the safe to the skids. removed from the bottom of the safe. 3. While removing the shipping rail from one side of the safe, carefully lower the safe to the floor. 4. Do the same to remove the remaining shipping rail. FOR SPORTS AFIELD MAXIMUM SECURITY SERIES SAFES (see page 8 for specific model numbers) 1. When you receive your safe, you may find it attached to a shipping rail. The drawer is secured from the inside of the safe by four lag screws. 2. Open your gun safe door and locate and remove the four black caps on the safe floor Using a wrench or 14mm socket (9/ 16″). Replace the four black caps. 3. Next, close the door and extend the latch bolts by turning the handle counter-clockwise. Ensure the door is properly latched before proceeding 4. With assistance, push the safe to one side of the pallet so that the safe extends over the rear edge of the pallet. Carefully tip the safe over until the bottom of the safe touches the ground. Then tip the safe slightly more, OM_GS_0218 www.sportsafieldsafes.com 16 22 TRANSPORTING YOUR SAFE WARNING: SAFES ARE VERY DELICATE WHO AND EASY TO HANDLE. PLEASE BE EXTREMELY CAREFUL WHEN TRANSPORTING THE SAFE. THE USE OF A TRAINED PROFESSIONAL WITH THE PROPER MOVING EQUIPMENT IS STRONGLY RECOMMENDED. Gun safe location is very important and extreme care should be taken in this consideration. 1. To maximize the fire protection of your safe, we recommend placing the safe on lower levels in your home where fire temperatures are lower and away from easily combustible materials. 2. To maximize burglary protection and stability, it is recommended that the safe be fixed to the floor. 3. To maximize household security, we recommend placing your safe in a secluded location out of the reach and sight of children. Move the safe to the desired location using a transport cart that can support the size and weight of your safe. Please take all necessary precautions to protect your flooring and prevent damage. HELPFUL: TO DETERMINE WHETHER YOUR SAFE CAN GET THROUGH DOORS, STAIRS OR CORNERS, TAKE THE EMPTY SAFE BOX AND CHECK THAT IT WILL FIT INTO ITS FINAL PLACE. 1. The safe should be installed next to a side panel with minimal space on either side of the safe. The safe should lie as flat as possible against the wall and floor. If necessary, remove the baseboard and/or wall paneling. 2. Proximity and location of electrical outlets should be considered when installing powered gun cabinets. 3. Always make sure the safe is in an isolated and dry area. Never place the safe in direct contact with a wet floor. When installing your safe on a concrete floor, the use of a moisture/protective barrier is highly recommended. Otherwise, or if the safe is exposed to chemicals or other adverse environments, the warranty may be void. 4. If your safe appears uneven, you may need to chock the bottom of the safe to prevent the door from swinging open too quickly or closing itself. OM_GS_0218 www.sportsafieldsafes.com 17 23 SECURING YOUR SAFE WARNING: YOUR SAFE IS DESIGNED TO SUPPORT ITSELF WHEN THE DOOR IS OPENED. HOWEVER, CAUTION SHOULD BE TAKEN TO AVOID TIPPING AND SAFETY HAZARDS. THE SAFE MUST BE FIXED TO THE FLOOR. Otherwise, the security and protection of the safe will be affected. FOR SPORTS AFIELD HAVEN, PRESEVER, TAC LZ, JOURENY & SANCTUARY SERIES SAFES (see pages 7 & 8 for specific model numbers) TOOLS TO BOLT SAFE TO CONCRETE SURFACE DRILL/HAMMER DRILL 1/2″ DRILL (for installing in concrete with hardware provided) WRENCH / 11/16″ (17MM) HAMMER 1. Use the hardware provided or consult your hardware store for hardware for your particular mounting surface. 2. Open your gun vault door and locate and remove the four black caps on the vault floor. This will give you access to the factory drilled screw holes. 3. To attach your safe to the floor, you must first drill holes in the floor surface. 4. Drill the appropriate diameter and depth of pilot holes based on the type of hardware being used and the type of floor surface. For the included hardware (concrete floor installation) we recommend using a hammer drill and a 1/2″ concrete drill bit to drill the four appropriate holes in the concrete floor 6. Secure the safe by driving all 4 anchor bolts through the factory drilled bolt holes in the Screw the bottom of the safe and tighten the washer sits on top of the rubber washer Tighten the screw to compress the rubber washer between the safe and the metal washer Otherwise, water may enter the safe in the event of a flood Journey Series safes do not include Rubber Washers 7. Reattach the four black caps to the bottom of the safe SPORTS AFIELD MAXIMUM SECURITY SERIES SAFES (see page 8 for specific model numbers) do not come with mounting hardware o your mounting surface and location Follow the same Steps as above to set the drill diameter & nd adjust the depth of the pilot hole based on the fastener material selected. OM_GS_0218 www.sportsafieldsafes.com 18 USE AND MAINTENANCE 24 LOADING YOUR SAFE 1. When loading guns into your safe, make sure they are seated securely against the notches in the gun racks to prevent accidental tipping when the door is closed is. 2. Store documents or heat-sensitive items in the bottom of the safe for maximum protection against fire damage. 3. Store ammo separately from valuables. 4. Don’t put anything in your safe that puts pressure on the door when you close it. 5. Select safe models have reinforced shelves, but as a good security precaution, store heavier items either on the bottom of the safe or away from the center of the shelves. 25 KEEPING THE SAFE DRY We recommend installing a moisture/protective barrier between your safe and the concrete floor to prevent moisture, mold and rust from damaging the safe. It is highly recommended that you place your safe in a location with air conditioning (heating in winter and cooling in summer). In areas with high humidity or frequent temperature fluctuations (garages), it is advisable to take appropriate precautions to protect against moisture damage. We strongly recommend using an internal dehumidifier and/or desiccant to protect your contents from rust or mold. Indoor dehumidifiers should not make direct contact with the side or back walls. 26 HINGES AND INTERNAL MECHANISM The hinges and internal locking mechanism are permanently lubricated and therefore maintenance-free. Opening your safe’s door panel may void your warranty. Always contact our customer service experts beforehand. OM_GS_0218 www.sportsafieldsafes.com 19 27 LOCKING PINS Occasionally it may be necessary to lubricate the active locking pins. To do this, pull out the locking bolts completely when the door is open. Wipe a small amount of oil/lubricant around each locking pin. 28 CLEANING To clean the surface of your safe, use a soft, non-abrasive cloth (we recommend lint-free polishing cloths). DO NOT use paper towels as they could scratch, mar or damage the finish of your safe. Water is often sufficient to clean the surface of your safe, but an ammonia-free window cleaner can also be used. DO NOT use metal polishes or solvents when cleaning. 29 HOW TO OBTAIN LOST KEYS To request replacement keys, please contact our Customer Services team on the number below. Please have all registration information ready before calling. Customer Service – (888) 792-4264 OM_GS_0218 www.sportsafieldsafes.com 20 30 NOTES OM_GS_0218 www.sportsafieldsafes.com 21 31 WARRANTY SA Consumer Products, Inc. will repair or replace, at its option, any Sports Afield Gun Safe that has been damaged by fire, forced entry, violent assault or natural flooding for the lifetime of the original owner. SA Consumer Products, Inc. will repair or replace, at its option, any Sports Afield Gun Safe with defective parts, paint or lock for the life of the original owner. If SA Consumer Products, Inc. determines that a replacement safe needs to be shipped, SA Consumer Products, Inc. will pay the freight cost of shipping the replacement safe to the original owner. This lifetime warranty is limited to the safe and specifically excludes any loss related to the contents of the safe. SA Consumer Products, Inc. reserves the right to obtain full evidence of your misfortune, such as: B. a police report and/or a letter of coverage from the homeowner. This warranty is not valid outside of the United States and Canada. Proof of registration and a copy of the proof of purchase must be available at the time of the claim. Visit our website at www.sportsafieldsafes.com to register your safe. The lifetime guarantee only applies to the original owner of the safe. SA Consumer Products, Inc. will only be responsible and liable if the safe is used in accordance with the instructions in your new Sports Afield Safe Owner’s Manual. SA Consumer Products, Inc. requires that repairs follow certain guidelines. The safe will be repaired at home if possible (parts and labor included); However, if a factory replacement is required (at the sole discretion of SA Consumer Products, Inc.), the replacement will be shipped freight prepaid, curbside. This warranty is inclusive and supersedes all other warranties, express or implied. The warranties of merchantability and suitability for a specific purpose are expressly excluded. This warranty is limited to the safe itself and/or its value and does not cover consequential damages of any kind, including but not limited to the contents in and within the safe. OM_GS_0218 www.sportsafieldsafes.com 22 If you have a question about your Sports Afield Gun Safe, please contact the SA Customer Service Team with your registration information. For more information please visit our website www.sportsafieldsafes.com Thank you for purchasing a Sports Afield Gun Safe. Your gun safe is built to protect you for a lifetime. However, please understand that your gun safe contains precision parts. If you are having difficulty opening or closing your gun safe, contact the SA customer service team first. Do not force open the gun safe. This can jam the components in the lock, requiring a vault technician to unlock your safe. This will cause you inconvenience and may result in the claim being rejected. OM-GS-0218
references
PDFium PDFium
What Happens When the Battery on an Electronic safe Lock Dies?
The 9 volt battery in your safe’s electronic lock should typically last between 8,000 and 10,000 openings. And that’s a lot of openings. But what if you open your safe and find that the battery suddenly dies? Are you locked out of your safe because your code is deleted? Here’s what happens when the battery in an electronic safe lock dies.
Don’t panic… your code is still there!
While inconvenient, getting locked out of your safe because of a dead battery is only a temporary problem. You can be sure that your combination code is still there when you have replaced the battery in your lock. This is because electronic locks contain something called “non-volatile memory” that stores the combination codes that you have programmed into your lock. In fact, your electronic lock’s memory can store your codes for up to 10 years, whether your battery is dead or removed.
Lock lights up but safe will not open
If your battery is not completely empty, your lock’s lights or display may still be on. After entering your combination code, you may still hear the expected beeps and clicks that occur as the safe’s deadbolt disengages. However, if you try to turn the handle, you may find that the lock has not fully disengaged. [Common Problems link] This is due to the battery not having enough juice left to fully power the opening process. Replacing your battery with a new one should solve this problem for you right away.
The type of battery you use matters
When it comes to the reliability of your electronic safe lock, it depends on the type of 9 volt batteries used. You should use good quality 9 volt alkaline batteries such as Duracells or Energizer. Although high-quality carbon batteries are available, which are often cheaper, electronic locks are designed to work better with alkaline batteries. A carbon battery may not provide enough constant power to pull the bolt back far enough to open your safe. So if you want to ensure proper operation of the lock, never skimp on the batteries.
prevent surprises
The last thing you want when you open your safe, especially in an emergency, is to find that the batteries in its electronic safe lock are dead. Liberty Safe recommends replacing the battery in your safe lock every six to 12 months. Your safe can always be opened quickly, as provided by the equipment with a reliable electronic lock.
Liberty Safe uses high-quality SecuRam electronic locks for its safes due to their extreme reliability.
Related searches to sports afield safe battery replacement
Information related to the topic sports afield safe battery replacement
Here are the search results of the thread sports afield safe battery replacement from Bing. You can read more if you want.
You have just come across an article on the topic sports afield safe battery replacement. If you found this article useful, please share it. Thank you very much.
