Are you looking for an answer to the topic “top finish 2 polishing compound“? We answer all your questions at the website Chewathai27.com/ppa in category: Aodaithanhmai.com.vn/ppa/blog. You will find the answer right below.
Table of Contents
Pai Boat Composites: TOPFINISH 2 Nano Polishing Compound
See some more details on the topic top finish 2 polishing compound here:
TOPFINISH 2 Natural Ultra Gloss Polishing Compound
Pai Cristal’s TOPFINISH 2 is an advanced nano abrasive technology polishing compound used to finish composite patterns, moulds and components to a mirror finish …
Source: www.easycomposites.co.uk
Date Published: 8/8/2022
View: 4120
TOPFINISH 2 Ultra High Gloss Polishing Compound for Epoxy
TOPFINISH 2 is a fine finish polishing compound developed specifically for tough plastics like epoxy resin. The super fine nano-particle formulation can be used …
Source: www.glasscastresin.com
Date Published: 11/16/2021
View: 6155
TOPFINISH 2 Ultra Gloss Polishing Compound
TOPFINISH 2 Ultra Gloss Polishing Compound is a secondary stage polish for hard plastics. It should only be used after NW1 Super Cutting Compound and will …
Source: www.oliverswoodturning.co.uk
Date Published: 11/24/2021
View: 9666
TOPFINISH 2 Nano Refinishing Polish – PAI Cristal
boat-02-finishing. TOPFINISH 2 is a nano-abrasives based polish for holograms-free surface refinishing, developed by Pai Boat Composites – Pai Cristal.
Source: www.paicristal.com
Date Published: 7/27/2022
View: 8924
TOPFINISH 2 Ultra Gloss Polishing Compound – 100g
Take your gloss to the highest level with TOPFINISH 2 ultra high gloss polishing compound for epoxy resin. TOPFINISH 2 can be used after a coarser cutting …
Source: www.brisa.fi
Date Published: 7/17/2021
View: 9764
Glass Cast TOPFINISH 2 Ultra Gloss Polishing Compound – ITS
TOPFINISH 2 is a fine finish compoud specifically developed for tough plastics like epoxy resin. The special formulation can be used to achieve even higher …
Source: its.co.uk
Date Published: 9/21/2021
View: 7028
ToolUSA High Gloss Polishing Compound For Soft Metal …
This Polishing Compound Is The Ideal Product To Use When You Want A Beautiful High-gloss Finish On Any Soft Metal, Hard Metal, Or Precious Metal.
Source: www.amazon.com
Date Published: 12/28/2022
View: 6638
TOPFINISH 2 Natural Ultra Gloss Polishing Compound
TOPFINISH 2 by Pai Cristal is an advanced nano-abrasive technology polishing paste used to finish assembled patterns, molds and components to a high gloss finish. In our test, no other polishing paste can produce such a high gloss in the same amount of time as TOPFINISH 2.
The balance of advanced nano abrasives and high performance polishes used in TOPFINISH 2 is unique to Pai Cristal Italia and represents the pinnacle of high gloss polishes even on the toughest composite materials such as vinyl ester and epoxy.
As a high gloss finishing or repair paint, TOPFINISH 2 is only intended to remove fine scratches left by coarser putty, holograms or to restore shine to a previously finished mould. After using coarser abrasives, initial scratch removal and polishing should be done with a faster cutting, coarser paste such as NW1 Black before proceeding to a high gloss finish with TOPFINISH 2.
Further information
how to use
For best results, TOPFINISH 2 should be used with a variable speed polisher, choosing a medium-soft foam polishing pad to quickly and effectively remove residual swirls from previous joints or restore extreme luster to molds and components.
Apply a small amount of the paste to the polishing pad or mop. Run the polisher on low speed and speed it up (1000 – 2000 rpm) while spreading the paste with criss-cross motions. Be careful not to overheat the surface of the mold or part. If heat builds up, reduce speed or pressure, or wait for heat to dissipate.
Reapply the compound as needed, but always allow sufficient time when reapplying to allow the compound to break down and transition from a cutting to a glossy effect.
Wipe the polished surface clean with a microfiber polishing cloth.
TOPFINISH 2 Ultra High Gloss Polishing Compound for Epoxy; 100g, 500g and 1kg
TOPFINISH 2 is a fine polishing paste that was specially developed for hard plastics such as epoxy resin. The superfine nanoparticle formulation can be used to achieve even higher gloss levels on polished epoxy surfaces or to restore shine to scratched or heavily used surfaces.
Highly recommended for use with all GlassCast resins, TOPFINISH 2 is ideal for finishing jewelry, table tops, counters, river tables and many more projects with an incredible mirror finish. It should be used after a coarser cutting compound such as NW1 in situations where the highest possible gloss is required.
Suggested Uses
TOPFINISH 2 is NOT a substitute for a coarser grinding paste such as NW1 Super Cutting Compound, which should always be used after smoothing GlassCast (on 1200 grit) with sandpaper. Instead, TOPFINISH 2 can be used as a second polishing paste to achieve an even higher degree of gloss if required. Alternatively, TOPFINISH 2 can be used to restore shine to existing worktops, bartops, floors or jewelry that may have become slightly scratched through use over time.
Improving the gloss level on a river table or countertop
Polishing jewelry or castings to a high gloss
Re-polishing scratched or repaired tabletops, bartops and worktops.
how to use
TOPFINISH 2 is a finishing paste and not a cutting paste. Before applying TOPFINISH 2, the surface of your resin should already be smooth and shiny. If the surface shows scratches, these should only be very fine usage scratches, not remaining scratches from previous smoothing and polishing.
Once the surface is ready for buffing, apply a generous amount of TOPFINISH 2 with a clean cloth or wipe. A polishing machine brings the best results in the shortest possible time, but it is also possible to polish epoxy resin with TOPFINISH 2 by hand.
When using a power polisher, it is recommended to use a soft or medium soft (blue) polishing pad to match the fine polishing effect of TOPFINISH 2. When buffing, be sure to keep the pad moving to avoid too much heat building up in the resin. Add more compound as needed.
TOPFINISH 2 Ultra Gloss Polishing Compound
Product description
TOPFINISH 2 Ultra Gloss Polishing Compound is a secondary polish for hard plastics. It should only be used after NW1 Super Cutting Compound and provides an even greater shine.
It contains superfine nanoparticles, so it shouldn’t be the only polishing paste you should use.
If you only use 1 polishing paste, choose the NW1.
TOPFINISH 2 is only for those who want the ultimate shine on their epoxy casts or other hard surfaces.
For best results, use a soft or medium mop on an electric buffing machine. Keep your head moving to avoid heat build-up.
Related searches to top finish 2 polishing compound
Information related to the topic top finish 2 polishing compound
Here are the search results of the thread top finish 2 polishing compound from Bing. You can read more if you want.
You have just come across an article on the topic top finish 2 polishing compound. If you found this article useful, please share it. Thank you very much.
