A Skip And A Jump Challenges? Top Answer Update

Lego Star Wars Skywalker Saga A Skip And A Jump is the first mission of Episode IX: Rise Of Skywalker in the video game developed by TT Games and includes 3 level challenges that are quite accessible.

Lego Star Wars Skywalker Saga A Skip And A Jump Challenges do not require a second playthrough of the mission, meaning you can unlock them all in story mode.

Obviously you can buy rumors for tips on the three A Skip And A Jump Level Challenges; Assuming you want to save 90,000 studs, in the guide below I will tell you everything you need to know about the tasks you need to complete.

The goal of the guide is to get you an extra Kyber Stone, which is awarded for successfully completing the following challenges:

lock out

Here comes the boom!

poetic flying

How to complete Lego Star Wars: The Skywalker Saga A Skip And A Jump Challenge #1 – Lock Off

The first Lego Star Wars A Skip And A Jump challenge you have to complete is Lock Off, where you have to avoid getting locked 3 times in a row.

This challenge is similar to many other level challenges we’ve completed so far, and to unlock it all you have to do is press LB/RB (on Xbox) when the lock prompt highlighted below appears on your screen .

Make sure you do this 3 times before destroying the 10 TIE Fighters.

How To Complete The Lego Star Wars Skywalker Saga A Skip And A Jump Challenge #2 – Here Comes The Boom

Here Comes The Boom Level Challenge can also be completed when you start the mission, again before you reach the main objective.

As you speed through the tunnel, you must take out 3 enemies with proton torpedoes or missiles.

To unlock the challenge, wait for your ship to lock onto the enemies (red crosshair circle fills up), then press X on Xbox to launch a torpedo.

If you happen to run out of torpedoes, you can get more by defeating the TIE Fighters with your blasters.

How to complete Lego Star Wars A Skip And A Jump Challenge #3 – Poe-Etic Flying

The third A Skip And A Jump level challenge is called Poe-Etic Flying, and it’s unlocked if you activate the hyperdrive in time for all the light-speed jumps.

The light speed jumps occur during the second part of the mission and are QTEs (Quick Time Events) that you must complete by pressing A on Xbox before time runs out.

If you miss any of these (there are 4 in total) you will miss the challenge and therefore be forced to restart the mission.

All you have to do is press or tap A when the button appears on your screen.

That’s it pilot! You’ve escaped the First Order and also completed all the Lego Star Wars Skywalker Saga A-Skip-and-A-Jump level challenges so now it’s time to get those in the next mission called They Fly Now !

In Lego Star Wars: The Skywalker Saga, True Jedi is the highest rank that players can attain in a game level. Each level has three different status ranks that you can achieve, and True Jedi is the highest status of each level. This guide will show you how to get true Jedi status in Lego Star Wars Skywalker Saga.

How to get true Jedi status in Lego Star Wars Skywalker Saga

The status you can achieve in each Star Wars Skywalker Saga level depends on the number of studs you can collect. Collecting studs is one of the main goals of each game level. You must collect a certain number of studs for each level to get the True Jedi kyber block.

In order to achieve the rank of True Jedi in any Lego Star Wars level, you must collect enough studs to reach the purple tier of the stud progress bar at the top of the screen. The easiest and best way to get to this level is to repeat the levels in Freeplay mode.

In Freeplay mode you can move at a certain level without any restrictions. You can easily access additional areas where you can easily collect more studs. Make sure you break everything in the area as Lego studs will be dropped as the objects are broken.

Make sure you discover every part of a level and break everything to max out your studs and reach True Jedi status!

True Jedi Status Achievements

Players will have the chance to collect two achievements by achieving True Jedi Rank in each of the missions in Lego Star Wars Skywalker Saga.

You think you’re some kind of Jedi?

You will receive this achievement as soon as you have achieved the rank “True Jedi” in one of the missions.

Now I’m the master

This achievement is unlocked once the player has achieved the rank of True Jedi in each level of the game.

The Lego Star Wars The Skywalker Saga Studs x10 multiplier is the upgrade everyone wants to unlock as it means you can pull in those studs at a much higher rate and unlock the other items and features in Lego Star Wars The Skywalker Saga a lot more quickly. As there was a secret code in many previous Lego games to activate this high end multiplier it was expected that there would also be one of the Lego Star Wars The Skywalker Saga cheats to do the same but so far the The only way to access them is to find Lego Star Wars The Skywalker Saga Datacards and then legally buy them with your accumulated rivets. Worry not because while the Lego Star Wars The Skywalker Saga Studs x10 Multiplier comes with a wild price tag, it’s not as hard to get hold of as you might think and we’ve got the lowdown on how to unlock it fast be able.

How to get Lego Star Wars The Skywalker Saga Studs x10 multiplier

(Image credit: Traveller’s Tales)

Unfortunately, if you want to get the Lego Star Wars The Skywalker Saga stud x10 multiplier, you will have to put in a lot of work to get it. There are currently no known cheats that will give you instant access to this boost, so you’ll need one of the Skywalker Saga Datacards and a whopping 384 million studs to legally unlock it! At first glance, that’s an absurd amount, but thanks to how these perks work, it’s actually not as bad as it looks.

There are five multipliers in total ranging from Studs x2 to the Lego Star Wars The Skywalker Saga Studs x10 multiplier, which have the following costs when purchased from the Extras menu in the holoprojector:

Studs x2 = 1,000,000 studs

Studs x4 = 2,000,000 studs

Studs x6 = 8,000,000 studs

Studs x8 = 48,000,000 studs

Studs x10 = 384,000,000 studs

However, these stud multipliers combine when more than one is activated at the same time to deliver a much larger boost than the individual pieces. This means that if you buy them in ascending order and keep them all active, the effective studs multiplier you actually achieve increases exponentially:

Studs x2 = x2 multiplier

Studs x2 + x4 = x8 multiplier

Studs x2 + x4 + x6 = x48 multiplier

Studs x2 + x4 + x6 + x8 = x384 multiplier

Studs x2 + x4 + x6 + x8 + x10 = x3840 multiplier

Thanks to these increasing combos, the actual “cost” of each multiplier level is technically the same 1,000,000 studs worth 1,000,000 as long as you buy and activate each multiplier as quickly as possible. Focus all of your stud collecting on unlocking these goodies in order, as this is the quickest way to earn the Lego Star Wars The Skywalker Saga Studs x10 multiplier. Once you reach that level and earn 3,840x the number of studs collected, unlocking everyone else should be a breeze in comparison.

Lego Star Wars The Skywalker Saga Tips | Lego Star Wars The Skywalker Saga Figures | Lego Star Wars The Skywalker Saga Kyber Bricks | Best Lego Star Wars The Skywalker Saga Upgrades | Lego Star Wars The Skywalker Saga Scavenger Ability | Lego Star Wars The Skywalker Saga Mumble Mode | Upgrade Lego Star Wars The Skywalker Saga PS4 to PS5

Play through all nine films in the Star Wars series with the LEGO Star Wars Skywalker Saga. Developed by Traveller’s Tales, this action-adventure game features many characters to unlock from nine classes in the game. While every character has some of the best skills and abilities, some characters are better than others. Ghost figures are one of them. These foolproof characters are just as invisible to enemies as ghosts, and you can easily take on your enemies with these characters in the game. They’re also a great show-off when playing in co-op. There are three characters with their ghost versions. These are Yoda, Obi-Wan Kenobi, and Anakin Skywalker. Our guide will help you get the Force Ghost Yoda using a code in LEGO Star Wars The Skywalker Saga.

Force unlock code for ghost character Yoda

The cheat code for the Force Ghost character Yoda in LEGO Star Wars the Skywalker Saga is NE14ABJ. You can enter this code either by pausing the game and navigating to the “Enter Code” option or by going to the Extras. Also, you must save the game after using the code because you cannot use the same code twice if you lose your data. Also read the LEGO Star Wars Skywalker Saga Studs cheat code guide.

These ghost figures are a good option to help you in some of the difficult LEGO Star Wars The Skywalker Saga battles until you find the Power Brick of Invincibility.

What are ghost figures in LEGO Star Wars The Skywalker Saga?

These characters are the ghost versions of regular characters in the LEGO Star Wars The Skywalker Saga. These ghost figures can be purchased through Studs. However, some users on the internet have discovered codes that could unlock these ghost figures. While you’re at it, be sure to check out our guide to Lego Star Wars The Skywalker Saga Datacards locations.

The ghost figures are the most expensive in the LEGO Star Wars The Skywalker Saga. This is because these ghost characters are invincible and your enemy will not detect you unless you are in a vehicle. On the subject of vehicles, you should read our guide on how to unlock capital ships in LEGO Star Wars Skywalker Saga.

Get ghost figures in LEGO Star Wars The Skywalker Saga

You can only get the ghost figures after you complete the main story. The Ghost Anakin Skywalker unlocks at 1,100,000 studs. In addition to Anakin’s abilities, you now have the ability to turn invisible. Keep in mind that this is the good guy Aniken and he can’t use the dark force so his attacks might not be that strong. The spirit Aniken has no lock-on ability, so most of its attacks would miss.

Obi-wan Kenobi’s ghost character also unlocks at 1,100,000 studs. You can use studs farming method to get lots of studs. These studs will also help you unlock characters like LEGO Star Wars The Skywalker Saga Boba Fett. Kenobi uses normal power and has a very average lock-on ability. But its limited lock-on ability can be ignored by the fact that this invisible character can be a good investment if you like stealthy attacking your enemies.

However, he can’t take out one guy at a time. His attacks are crowd-focused, and he can sweep tons of enemies with a single attack. He uses a lightsaber to damage enemies. Yoda’s ghost character is the most expensive. You can unlock the Ghost Yoda at 1,200,000 studs. A good investment, these ghost characters can attack your enemies with lightsabers and violence, doing a lot of damage in the process.

Due to the extremely high prices, players have discovered codes that would help you unlock the ghost characters. Unfortunately we only found the code for Ghost Yoda.

We hope you have enjoyed our guide on how to get Force Ghost Yoda with a code in LEGO Star Wars: The Skywalker Saga. Feel free to leave your questions in the comment section below.

Next: LEGO Star Wars: The Skywalker Saga glitches

IG-88 is one of the coolest bounty hunters in the Star Wars galaxy, and if you want to unlock him you’ll need to complete his special quest. Of course, the bounty hunter hangs around in a den of scum and villains – Mos Eisley. It won’t be long before you have your very own assassin droid. Just remember to finish Episode 4 and unlock Mos Eisley on Tatooine before attempting to add him to your character roster.

IG-88 is one of the bounty hunters sent by the Empire to capture Han Solo in Episode 5: The Empire Strikes Back. This tall, lanky droid has a big gun and a bad attitude. Like other bounty hunters, he can cling to ledges and fire a powered-up blaster that can destroy golden LEGO objects in the area. They also have other useful abilities that you’ll want to unlock – Scatter Blasts and bounties on defeating opponents are my personal favorites.

More Star Wars: The Skywalker Saga guides:

100% Walkthrough | All Level Challenges and Minikits | Free additional codes for characters and vehicles | How to unlock studs x2 early | Early Upgrades | How to breed studs x100 combo trick

How to unlock IG-88 | Bounty Hunter Local Guide

IG-88 is a high-headed, iconic bounty hunter found in Mos Eisley. We never see his fate in the main series, but we do meet another IG assassin droid in The Mandalorian. This is a very different version of these droids, one that gains a certain sense of empathy. IG-88 is a relentless hunter – even if it doesn’t sound that mean in-game. Here’s where you can find him.

IG-88 Minifig Location: Tattoine – Mos Eisley, travel to the southwest area of ​​the map, past the shooting range. Talk to IG-88 to receive the Green Harvest mission. Complete the mission to unlock this droid.

To complete the Green Harvest mission, travel to the Cantina. Talk to the NPC with a green rumor token – he’ll point you towards the cantina to find the Rancor Keeper. Go inside with a protocol droid and talk to the alien near the door. Only a protocol droid can converse with this guy. He sends you across town – travel to the crashed LEGO spaceship to the east and speak to the rumors NPC (green marker) in the marketplace.

Follow the markers to the area shown on the map above. Talk to the door and IG-88 will arrive to take care of his target. He will force open the door and storm into the restaurant. Talk to Malakili inside and complete IG-88’s bounty! Talk to IG-88 to complete the mission and unlock IG-88 for purchase.

Find IG-88 in the Bounty Hunter Characters tab. It costs 200,000 studs to unlock. That’s quite a price for one of the coolest robots in the series.

Lego Star Wars games have always been known for their wide variety of different characters. These games have featured everything from Sith Lords to Clone Troopers and everything in between! One of the most common types of characters you can play as are the brave Crusaders of the Jedi Order. In this article we will rank the top 10 best jedi in Lego Star Wars: The Skywalker Saga!

We’re going to be basing this list primarily on looks and going through everything we love about their designs. We also provide guidance on how to unlock these characters so you can play them yourself.

Top 10 best Jedi, ranked from good to best

Without further delay, let’s jump straight into this ranking!

10/10

Aayla Secura

Image: TT Games & Warner Bros via HGG / Koby Gibson Ross

To start off our list, we have the Jedi Knight named Aayla Secura!

This is a fan-favorite Jedi, first seen in Episode II: Attack of the Clones during the First Battle of Geonosis. She is a Twi’lek and one of the few Twi’lek Jedi in the cannon. That makes her a very special character.

She has light blue skin with unique clothing not seen on any other character in her class. She also wields a blue lightsaber which is most commonly seen on screen. I was a little disappointed to learn that she doesn’t wield a green lightsaber like she does in the 2005 Star Wars Battlefront game. According to Cannon, she only uses a single blue lightsaber.

How you can unlock them is actually very simple and straightforward. First you have to go into space via Geonosis. You should find a challenge known as Scramble Run: Geonosis. To complete this challenge, you must fly through checkpoints in a short amount of time. Once you reach the Gold ranking, unlock Aayla Secura! You can also get them using cheat code “KH7P320”.

9/10

Ray Skywalker

Image: TT Games & Warner Bros via HGG / Koby Gibson Ross

Ninth in our ranking of the top 10 Jedi in Lego Star Wars: The Skywalker Saga is Rey Skywalker! Say what you will about the sequel trilogy and main character Rey, but there’s no denying that this minifigure has a great design (and a unique lightsaber too!).

This is a Rey costume with sleeveless white jedi robes. These are my favorite robes in the game as they look like something out of a kung fu movie. However, the best thing about this outfit is the lightsaber. It features a unique black handle and glowing yellow blade, the only one of its kind in the entire game!

All you have to do to acquire this great looking outfit is complete Episode IX: The Rise of Skywalker in its entirety. It will be unlocked and ready to play after you complete the Be With Me level. Remember that in order to unlock Episode IX, you must play through the previous episodes of the Sequel trilogy.

8/10

Plo Koon

Image: TT Games & Warner Bros via HGG / Koby Gibson Ross

Now we have a personal favorite Jedi of mine. At number 8 in our ranking is Jedi Master Plo Koon. You might recognize this interesting-looking Jedi if you’ve watched the Clone Wars animated series (or paid close attention to the background characters in the prequel trilogy).

This Jedi Master is known for his compassion and close relationship with Ahsoka Tano, making him a popular character.

Plo Koon is a Kel Dor, an alien species in the Star Wars universe who requires a special mask to leave their homeworld. This mask is the most eye-catching part of his design and translates well into the Lego form. His torso and robes also look excellent, although not as unique as his head.

You can get your hands on Plo Koon by traveling to Geonosis and speaking to a specific Geonosian. He will state that he wants to become a scholar on Naboo, but the Separatists will not let him go. Just escort him to Naboo in your spaceship, all the while fending off waves of Vulture Droids in space. Once you arrive at Naboo Space, you can hand it over to another NPC and you will be rewarded with Plo Koon!

7/10

Kit Fisto

Image: TT Games & Warner Bros via HGG / Koby Gibson Ross

Next, at #7, we have another Jedi Master named Kit Fisto. This is a very popular Jedi who first appeared in Episode II – Attack of the Clones. He is popular for his beautiful, unique design, pleasant Jamaican accent, and charming smile. And he appears in Lego Star Wars: The Skywalker Saga, making him one of the many unlockable characters.

Kit Fisto’s species is a Nautolan, an aquatic lifeform known for having tentacles where their hair should be, as well as large black eyes. Its unique design has always been popular with fans and it should come as no surprise that it made our top 10 list.

He wields a green lightsaber. While this color isn’t anything special, it’s definitely a nice change of pace from the usual blue lightsaber.

You can unlock Kit Fisto by beating Episode II – Attack of the Clones. It will be available for purchase once you complete the Droid Factory Frenzy level. He is one of the easiest characters to unlock in the game.

6/10

Anakin Skywalker (Episode III – Cloak)

Image: TT Games & Warner Bros via HGG / Koby Gibson Ross

And now Anakin Skywalker, one of the most iconic characters in all of Star Wars, is number 6! More specifically, it’s Anakin Skywalker’s Episode III – Cape Variant. This intimidating costume shows Anakin about to turn to the dark side, which makes it all the more special to me.

Anakin is human, which would make him less special compared to some of the other creatures on this list. But his black Jedi robes and fearful look are more than makeup for it. I’m a big fan of cloaks and his voice acting with other characters is among the best in the game.

You can unlock this Anakin Skywalker costume by beating Episode III of the Skywalker saga. It can be played once you’ve completed the Out for the Count level, where you must fight your way through the invisible hand to rescue Chancellor Palpatine and defeat Count Dooku in battle.

5/10

Mace Windu (cloak)

Image: TT Games & Warner Bros via HGG / Koby Gibson Ross

For those of you who love Jedi Master Mace Windu (or Samuel L. Jackson, the actor who plays him in the movies), you’ll definitely want to unlock this cloak variant for him. Mace Windu is one of the coolest Jedi in Star Wars, and it would have been a crime against humanity if you couldn’t play him in The Skywalker Saga.

This variant has his usual tan and white robes but with an elegant brown cape to match. This cape really makes the outfit and I’m glad it’s an option for you to wear.

However, the main reason he is on this list is his iconic purple lightsaber! It’s the only one of its kind in the game, and since purple is my favorite color, I just had to add it to this list.

This variant of Mace Windu can only be unlocked and played as if you were playing through Episode III. He is unlocked after defeating General Grevious in the So Uncivilized level. It will be unlocked automatically once the level is finished and you return to free play.

4/10

Barriss Offee

Image: TT Games & Warner Bros via HGG / Koby Gibson Ross

It might come as a surprise to see this next election so high on the list. It is Barriss Offee, Master Luminara’s Padawan. You may know her from the animated series Star Wars: The Clone Wars, where she quickly became one of my favorite characters. She appears in Lego Star Wars: The Skywalker Saga as a playable character.

The main reason I appreciate her design so much is her unique blue cape and hood. This is a really great looking color that I haven’t seen on any other Jed (that I’m familiar with anyway). I also love the voice acting for her as well as the design of her face.

To unlock this character, you must first jump through some hoops. You have to complete three side quests that you can take on in the water world of Kamino. In the final quest, you will work with Barriss to stop a Wollamander clone rebellion on Kamino. After completing this last quest, it becomes available.

3/10

Obi-Wan Kenobi (Episode II – Robe)

Image: TT Games & Warner Bros via HGG / Koby Gibson Ross

For number 3, we have everyone’s favorite Jedi Master, the adorable Obi-Wan Kenobi! More specifically, the Episode II – Robe variant of him. Obi-Wan is one of the oldest Star Wars characters, making his first appearance under the name Ben Kenobi in Episode IV – A New Hope. To date, he is one of the most popular characters.

This design of his shows his light brown Jedi robes but with a unique brown cape surrounding them. This is unique as most of the minifigures have a brown cape instead of having their robes printed on their bodies. I love Obi-Wan’s particular hair and beard style and personally I think he looks better than what he has in Episode III.

This is an easy-to-unlock Obi-Wan costume that you can acquire by beating Episode II of the game. It will unlock for you once you complete A Royal Threat level, which happens to be the opening level for this episode.

2/10

Luke Skywalker (Alt – Ahch-To)

Image: TT Games and Warner Bros via HGG

And now, runner-up in the top 10 Jedi in Lego Star Wars: The Skywalker Saga, it’s the legendary Luke Skywalker himself. This particular variant of him is technically classified under the Extra tab, not the Jedi, but he’s still a Jedi for all intents and purposes.

While the writing for Luke could have been handled better in the films, there’s no denying how gorgeous he looked in his Jedi robes!

The outfit consists of a pair of white and tan robes with a beautiful and very unique tan cape. The cape is the best part of this outfit. I love how it really makes him look like the Grand Master of the New Jedi Order (even if his temple was burned to the ground). His hair looks really great here too and the outfit comes with his iconic green lightsaber!

You can obtain this variant of Luke Skywalker by completing the “Jedi Training” mission, which can be found and played through in Episode VIII – The Last Jedi. You can buy him for 100,000 studs.

1/10

Ashoka Tano

Image: TT Games and Warner Bros via HGG / Koby Gibson Ross

Ahsoka Tano brings home the gold medal for best Jedi in the entire Skywalker saga. Ahsoka is one of the most popular characters from the Prequal era as well as from all of Star Wars.

She started out as annoying and brutal when she debuted in the Clone Wars movie, but after some much-needed character development, she became a classic and popular character.

This specific design of hers is from Season 2 of The Mandalorian. Because of this, Ahsoka is a fully grown adult with a gray outfit and her dueling white lightsabers from Star Wars: Rebels. The dueling blades are the best thing about this character. Not only is the color unique, it feels very distinct and different than some of the other Jedi on this list.

Unfortunately, you cannot acquire Ahsoka Tano in the base game. To get them you need to buy the Mandalorian Season 2 Character Pack for $2.99. Once you’ve bought the DLC, she’ll be unlocked instantly. You can select them from the character menu at any time!

Join the High Ground!

That concludes our ranking of the top 10 Jedi in Lego Star Wars: The Skywalker Saga! Do you agree with our top picks? Let us know!

Subscribe to our weekly newsletter for more great content! We offer regular features for all your favorite games, including more Lego Star Wars!

Have fun playing!

related reading

To unlock every character in Lego Star Wars: The Skywalker Saga you need to play through all nine movies and complete certain tasks, but you can get some just by entering a code. TT Games and Warner Bros. Interactive provided several codes to Game Informer at launch. When you start the game, access the pause screen and then access the “Enter Code” option.

The codes will add a variety of characters such as Dengar and Emperor Palpatine. Getting these characters early is a huge win, as they’re part of classes you need to complete certain achievements and typically don’t unlock until later in the game. Here are the codes:

Aayla Secura: KH7P320

Admiral Holdo: XV4WND9

C-3PO (Holiday): C3PHOHO

Chewbacca (vacation): WOOKIEE

DARTH VADER (Holiday): WROSHYR

Dengar: OKV7TLR

D-O (Holiday): TIPYIPS

Emperor Palpatine: SIDIOUS

Gonk Droid (Holiday): DAY OF LIFE

Grand Moff Tarkin: 3FCPPVX

Mr Bone: BAC1CKP

Nute Gunray: WBFE4GO

Poe Dameron (Holiday): KORDOKU

Poggle The Lesser: Z55T8CQ

Ratt’s Tyerell: GR2VBXF

Razor Crest (Ship): ARVALA7

Resistance I-TS Transport (ship): SHUTTLE

Shaak Ti: VT1LFNH

Shmi Skywalker: T9LM1QF

Snap Wexley: SKYSAGA

We will update this list as more character codes are discovered. Until then, have fun unlocking characters and may the force be with you!

Destroying Starkiller is the ninth story mission in Episode VII: The Force Awakens in LEGO Star Wars The Skywalker Saga. This walkthrough for destroying Starkiller covers how to complete each of the three level challenges, collect all five minikits (using free play), and achieve True Jedi Rank in order to 100% complete the story mission.

Loading

advertisement

Destruction of Starkiller targets

Complete the mission “Destroy Starkiller” 100%:

Level Challenges:

Challenge #1: Damn Pilot! – Break out of 3 enemy lock-ons. Challenge #2: Keep your cool – Shoot off the helmets of 5 Snowtroopers. Challenge #3: Snow Joke – Make Kylo a snowman.

Collect all 5 minikits

Earn True Jedi Rank by collecting 80,000 Studs

Follow the walkthrough to learn how to do these in the order in which they appear.

Starkiller Story Destruction Walkthrough

advertisement

opening sequence

Time to destroy Starkiller Base. You begin the mission as Poe Dameron, flying his X-wing. It is important to focus on collecting Studs throughout the story mission in order to earn enough for True Jedi Rank. That means destroying every bit of the destructible environment/landscape. Keep this in mind as you progress, as there are plenty of destructible crates, vegetation, and more around you.

Challenge #1: Damn Pilot!

To earn Heck of a Pilot you must break out of 3 enemy lock-ons. At the beginning, your goal is to destroy 10 TIE Fighters, 15 Starkiller Towers and 15 Antennas. There is a lot going on and there are many enemies to fight. In this section, you will be stalked by enemy TIE Fighters. Avoid their locks by triple pressing the on-screen prompt in this section to complete this challenge.

Minikit 1/5

After defeating the necessary enemies, towers, and antennas in the first section, you’ll begin a trench run. There are white turrets along the left and right sides of the moat. Destroying 10 of these towers will earn you your first minikit. There are more than 10 of them, so don’t worry if you miss a few.

advertisement

Minikit 2/5

Near the end of the trench run, your second minikit will be near the ground. Make sure you do it quickly because this section ends right after this minikit, so going right past this one is very easy.

Loading

Minikit 3/5

After the ditch run, your group joins Rey and Finn on foot in the woods. You will be immediately thrown into the first phase of a boss fight against Kylo Ren. Focus on knocking him down with Finn’s lightsaber and dodging his attacks, denoted by red marks on the ground.

At the end of this first phase, Kylo will run away and cut down some trees to block your path. Destroy the trees and follow the linear path through the forest. Some stormtroopers will get in your way, but don’t worry about them too much. As you get closer, they will be thrown into a lava pit. Follow the path around the lava pit to continue your fight with Kylo Ren.

advertisement

This second phase is just like the first. Knock him down with your lightsaber and avoid his telegraphic attacks. At the end of this stage, Rey will realize her power abilities and steal back the lightsaber before Kylo runs away again.

Chase Kylo the broken TIE fighter wing and a bunch of stormtroopers will attack. Ignore them for now and look at the rock formation on your left. You should notice a minikit above it. Jump up the rocks to collect your third minikit.

Minikit 4/5

Opposite these rocks is a breakable wall. Use Rey’s Breaker Blaster to smash the wall and reveal your fourth minikit.

Challenge #2: Keep a cool head

advertisement

To keep your cool you need to shoot down the helmets of 5 Snowtroopers. So now focus on the Snowtroopers as Finn. Shoot them, making sure to aim for their heads so they knock off their helmets. Do this 5 times to complete this challenge.

Defeating Kylo Ren…. For now

After defeating his Snowtroopers, Kylo will run away one last time. Use Rey’s Net Launcher to create a climbable surface. This allows Rey and Finn to climb up the cliff to continue pursuing Kylo.

Defeat all additional Snowtroopers in that area, then focus on Kylo Ren. Rey is now in possession of the lightsaber, so switch to Rey and focus on knocking Kylo down. Also this phase of the fight is the same as the last two. A QTE will take place to complete the battle and mission.

You can return to this freeplay mission from the holoprojector menu and follow the rest of the guide on this page to achieve 100% completion. Otherwise, proceed to the next story mission, Piece of the Resistance

advertisement

Demonstrating Starkiller Free Play Walkthrough

In order to get the following minikit in Freeplay, you need access to the following character types.

Character type required to complete Destroy Starkiller Free Play Jedi/Dark Side

Challenge #3: Snow joke

In the second phase of Kylo Ren’s boss fight, destroy the two large rocks to the left of Kylo’s starting position. These feature buildable pieces that you can use to build a giant snowman.

To earn Snow Joke you need to turn Kylo into a snowman. So switch to a Jedi/Dark Side character and pick up the giant snowman. Then throw it at Kylo to complete this challenge.

advertisement

Minikit 5/5

In the same area as Challenge #3, there are some crates on the right side of the combat area. Use a Jedi/Dark Side character to lift and stack these crates to reach the final minikit.

In this story mission you have now collected everything. Continue this walkthrough with the next story mission, Piece of the Resistance

Was this guide helpful? leave feedback

TT Games’ brick-filled adventure in A Galaxy Far, Far Away is the most ambitious Lego Star Wars game yet, and this is perhaps best reflected in Lego Star Wars The Skywalker Saga’s extensive list of planets and locations. There are a total of 124 explorable planets in the game – with multiple locations also available during missions. Players may find some of their favorite locations missing, but this will still be the greatest Lego Star Wars game we’ve seen.

As the name suggests, Lego Star Wars: The Skywalker Saga is packed with content from the nine main Star Wars films. That means we won’t see Corellia and Kessel (from Solo) or Scarif and Jedha (from Rogue One). However, you can bet all your Republic credits that we’ll see plenty of Tatooine and other popular planets like Hoth, Kamino, and Kashyyyk.

Of course, there’s more to the Star Wars galaxy than just this handful of planets. So, let’s dive into the full list of Lego Star Wars The Skywalker Saga planets and locations. We know exactly where our rock-filled adventures will take us.

List of planets and locations from Lego Star Wars The Skywalker Saga

So let’s just get into that. Here is a complete list of the planets and locations from Lego Star Wars The Skywalker Saga:

Ahch-To Ahch-To Space Temple Island

Ajan Kloss Ajan Kloss Room

Bespin Bespin Space Cloud City

Cantonica Cantonica room

Coruscant Coruscant Space Federal District Jedi Temple Coruscant Senate Building Uscru District

Crait Crait room

Dagobah Dagobah Space Dragonsnake Moor

D’Qar D’Qar Space Resistance Base

Endor Endor Space Ewok village

Exegol Exegol space

Geonosis Geonosis Space Stalgasin Hive

Hoth

Hoth Space Echo Base

Jakku Jakku Space Niima Outpost Tuanul Village

Kamino Kamino Room Tipoca City

Kashyyyk Kashyyk area Kachirho

Kef Bir Kef Bir room

Kijimi Kijimi Room

Mustafar Mustafar Space Mining Complex

Naboo Naboo Space Theed Lake Paonga

Pasaana Pasaana room

Takodana The Castle of Takodana Space Maz

Tatooine Tatooine Space Mos Espa Mos Eisley Jundland Wastes

Utapau Utapau area Pau City

Yavin 4 Yavin 4 Room Great Temple

In addition to the above locations, players can explore Starkiller Base during The Force Awakens, Jabba’s Palace during Return of the Jedi, and both the Death Star and Death Star II. Other locations include the interior of a Trade Federation battleship, the Peranki Arena on Geonosis, and the legendary Mos Eisley Cantina.

At the moment, the only post-launch content available for this game is the previously announced Lego Star Wars The Skywalker Saga DLC character packs – however, there’s no telling if TT Games will release any more locations as post-launch content .

There are well over 300 characters on the Lego Star Wars The Skywalker Saga character roster and you can check out the incredible talent that brings these characters to life with our Lego Star Wars The Skywalker Saga voice actor cast list.

LEGO Star Wars: The Skywalker Saga will feature many explorable planets introduced in the Star Wars films. There’s no telling how big each planet’s map will be, but the amount of planets is incredible.

A map of the galaxy is hung in a gameplay overview for LEGO Star Wars: The Skywalker Saga. There are 24 planets in total and below is the map and these planets are listed in alphabetical order.

Image via TT Games

Ahch-To

Ajan Kloss

example

Canton

Coruscant

crait

D’Qar

Dagoba

Endor

exegol

geonosis

Hoth

Jaakku

Kamino

Kashyyk

Kef Bir

kijimi

Mustafar

Nabu

passana

Takodana

Tatooine

utapau

Jawin 4

We can assume that the upper left side of the map is unexplorable since it is Wild Space not typically explored in Star Wars. The center of the map is the core, which is also inaccessible for the same reason as Wild Space. The 24 planets above represent the majority if not all of the planets we will be visiting in LEGO Star Wars: The Skywalker Saga.

For more information about LEGO Star Wars: The Skywalker Saga, see What movies will LEGO Star Wars: The Skywalker Saga cover? or All editions and pre-order bonuses for LEGO Star Wars: The Skywalker Saga right here in the Pro Game Guides.

To unlock every character in Lego Star Wars: The Skywalker Saga you need to play through all nine movies and complete certain tasks, but you can get some just by entering a code. TT Games and Warner Bros. Interactive provided several codes to Game Informer at launch. When you start the game, access the pause screen and then access the “Enter Code” option.

The codes will add a variety of characters such as Dengar and Emperor Palpatine. Getting these characters early is a huge win, as they’re part of classes you need to complete certain achievements and typically don’t unlock until later in the game. Here are the codes:

Aayla Secura: KH7P320

Admiral Holdo: XV4WND9

C-3PO (Holiday): C3PHOHO

Chewbacca (vacation): WOOKIEE

DARTH VADER (Holiday): WROSHYR

Dengar: OKV7TLR

D-O (Holiday): TIPYIPS

Emperor Palpatine: SIDIOUS

Gonk Droid (Holiday): DAY OF LIFE

Grand Moff Tarkin: 3FCPPVX

Mr Bone: BAC1CKP

Nute Gunray: WBFE4GO

Poe Dameron (Holiday): KORDOKU

Poggle The Lesser: Z55T8CQ

Ratt’s Tyerell: GR2VBXF

Razor Crest (Ship): ARVALA7

Resistance I-TS Transport (ship): SHUTTLE

Shaak Ti: VT1LFNH

Shmi Skywalker: T9LM1QF

Snap Wexley: SKYSAGA

We will update this list as more character codes are discovered. Until then, have fun unlocking characters and may the force be with you!