Best Ironing Board Cover? Trust The Answer

Whether you’re replacing your ironing board cover due to stains or other damage, this article covers everything from measurement to final fit. Most generic covers fit many sizes from popular brands, but you should know your exact measurements before ordering a new cover.

Also check out our article on the best ironing board covers for our top covers or visit our review of the best ironing boards for a complete set.

1. How to replace an ironing board cover (install, adjust and tighten)

There are 4 types of attachment systems: drawstring, bracer clips, hook and loop straps, or hook and loop straps.

All systems allow for some margin of error and can be adjusted smaller (but usually not larger) by tightening the adjustment under the board and pulling the excess fabric together, giving you a smooth ironing surface.

Remove the old cover. Discard the foam backing if it is not integrated with your board cover. If the foam backing is separate, align the new cover with the foam. Align the single or double layer on the top of the board until it is straight. Hold the cover down firmly while gently tightening and adjusting the fastening system. Smooth the surface while gradually tightening it

Note: If you find your ironing board cover is too big, the drawstrings are easy to adjust and tighten. Small adjustments and a little patience are all you need.

2. How to measure your ironing board for a new cover

Simply measure the surface of your ironing board to get the correct measurements

First measure the length of your ironing board from tip to tail not including the iron rest. Then measure the width of your ironing board at the widest point from side to side. You don’t have to consider the thickness of the ironing board or the height of the padding

You should end up with a standard ironing board size of about 54 inches long and 14 inches wide. Try to buy as close to this measurement as possible. If you can’t find the exact size, you should go a little larger, not smaller.

If you need more information, check out our Ironing Board Size Chart.

When it comes to special boards with unique shapes, like a professional ironing board for quilters, it is not advisable to order a standard cover. You will need to find the exact brand match online or contact the manufacturer directly if you need a replacement cover. This guarantees a perfect fit.

3. Where to buy an ironing board cover

Because of the variety and availability, as well as better prices, we recommend that you buy your ironing board covers online at Amazon.com. Shipping is super fast and you get a cheap Amazon return policy.

4. What is the best material for an ironing board cover?

Most ironing board covers are made of cotton, which is good for the average household’s ironing needs. If you find that you’re going through the covers faster than you’d like, you might consider upgrading to a metalized or silicone-coated cardboard cover, which has excellent durability and will last longer.

Cotton ironing board cover

This natural and strong fabric provides good thermoregulation while allowing steam to penetrate the fabric easily without causing underlying moisture. Since it can withstand higher temperatures, it is less likely to discolor after repeated use.

Metallic cotton cover

Metallized cotton is suitable for slightly heavier requirements. The cotton cover is reinforced with a metal such as aluminum or copper. This works by reflecting heat back into the garment for faster ironing time. It is suitable for both steam and dry irons.

Silicone coated circuit board cover

Cardboard covers coated with silicone are extremely hard-wearing as well as fire and dirt-resistant. (Whether silicone or metalized is better is still pending.)

polyester cover

Stay away from cheap polyester covers!

5. Best replacement for ironing board foam padding

Most ironing boards come with padding, but it’s a good idea to replace the ironing board foam if you can feel the carbide base of your ironing board. Foam padding may compress after prolonged use and exposure to heat. The padding on an ironing board helps absorb the pressure of ironing across seams.

Without adequate padding (at least 1/16 inch) you risk garments scorching or shining. In some cases, the metal mesh at the base of your ironing board can even leave an imprint on your clothes.

There are three types of padding that you can add to your board. Keep in mind that some plate covers are already padded so you may not need an extra layer.

felt padding

Both natural and synthetic options are available. The compacted fibers and density of the felt provide a strong and durable ironing surface that won’t stretch out of shape. The felt pad should be larger than your board and then cut to the shape of your board. Brabantia has a one-size-fit-all option (53 inches long x 19 inches wide x 0.2 inches thick) and fits both small and large boards.

foam padding

Foam is heat resistant but has average durability. It’s a cheap synthetic material and quite porous, so it tends to stretch out of shape. Thicker foam inserts are more durable.

wool padding

Wool is much more durable, breathable and heat resistant. The compression of the natural fibers in the wool filling allows heat to flow through the clothes when ironing and then radiate back into your fabric. This heat retention efficiency shortens your ironing time.

6. Drawstring vs Elastic Edges

Drawstring covers are much easier to adjust to slightly smaller boards, while elastic edges have much less room for error and should be ordered to fit snugly.

DIY plastic-free ironing board cover and natural wool pad

Last November, I decided it was time to get rid of the small, dingy, and potentially toxic desk ironing board we’d been using for years. And by we I mean Michael. Still haunted by memories of ironing my father’s shirts in the damp basement laundry room with crickets chirping and imaginary mice scampering from corner to corner, I avoid ironing as much as possible. Michael, on the other hand, irons his work shirts every week and I wanted him to have a nice, full ironing board with a non-toxic pad and cover, but I didn’t want to spend a lot of money.

Get an ironing board for FREE

Knowing that I would start a year not buying anything new, I decided to look for a used ironing board. I posted an ad on Nextdoor, a social network where neighbors can keep in touch about what’s happening in the hood, and asked if anyone had an ironing board they didn’t want.

I would have gladly paid for it, but one of my nice neighbors offered me his old one for free! I just had to lug it home before work one morning. The joints are a little rusty and squeaky, something I’ve wanted to deal with since we got it over a year ago, but it’s sturdy and Michael isn’t complaining, so honestly I’ll probably never get around to it get squeak. Free is free, right?

Looking for a plastic free pad

My next task was to find a base that is not made of synthetic materials (i.e. plastic) and does not contain toxic flame retardants. Here I was willing to spend some money. After some Googling, I settled on the Sonoma Wool Company’s Ironing Board Pad, made from 100% pure wool from locally raised sheep in Sonoma County, CA. Wool is inherently flame retardant and this underlay is thick and durable.

The pad comes as a rectangle. You cut it yourself to fit your ironing board.

My cats had fun with the ingredients.

DIY ironing board cover

Did you know that many ironing board covers are coated with perfluorocarbons? According to consumer advocate Debra Lynn Dadd in her book Toxic-Free:

Today, most iron and ironing board covers are coated with tetrafluoroethylene plastic, better known as Teflon. Given that heating plastic causes it to outgas its toxic fumes, irons and ironing board covers seem like odd places to put it, especially since a non-stick coating isn’t even required for the task. Tetrafluoroethylene vapor may irritate eyes, nose and throat and cause breathing difficulties.

After shelling out some green for the pad, I decided to get smart with the cover. As I googled further, I found instructions on how to make a simple ironing board cover on the Frugal Family Times website. The author uses an old curtain for her cover. I decided to go to Goodwill and pick out a used 100% cotton sheet. I took my friend Mark along as he would be helping me sew the quilt.

Look, I don’t really sew. But Mark has a sewing machine and knows how to use it. In fact, he made really cute reusable bags and backpacks and posted them on his Facebook page. So we carried the sheet back to his house to get to work.

After accidentally buying a fitted sheet, we first sat down on the floor with seam rippers and ripped out the elastic. Little did we know then that this rubber band would be very useful later in the process.

Then Mark got out his ironing board and ironed the creases out of the fabric. I suppose it’s ironic having to use an ironing board to iron an ironing board cover you haven’t already made.

Then we spread the sheet out on the floor, placed Mark’s ironing board on it (his is the same size as mine) and with a fabric marker pen traced the ironing board 3-1/2 inches from the side of the board.

I cut out the ironing board shape with scissors. (Sorry about the constantly changing colors in these photos. It was dark in Mark’s apartment and my camera seemed to have gone a little crazy.)

Mark turned down the edges 1/2 inch and ironed the seam down. (More ironic irony.)

Then he folded the edges down an additional 1 inch, ironed again, then pinned.

This wide seam is used to pull the cord through. Mark went around the seams twice to make sure they were secure. IMPORTANT: Leave a small opening somewhere along the seam. You will need it later to pull the string through.

After all the seams were sewn, I brought my ironing board shaped sheet home. The remaining step would be to get a string and run it through the tube we created with the stitching. Unfortunately I didn’t have enough heavy string for this project. And then I remembered: the leftover rubber band from the sheet! I attached a safety pin to it and fed it through the seams.

The safety pin is under my thumb in this picture. Just knead and pull and knead and pull until it’s all the way around.

I then placed the cover on the ironing board, pulled the elastic taut, and used the same safety pin to secure the ends together under the ironing board. I tucked the rest of the elastic into the ironing board cover.

And voila! All finished!

save money

Even though I got the ironing board for free and the sheets dirt cheap at Goodwill, I still paid a pretty penny for the pad. $59.95 to be exact. Checking Amazon tonight I see a 100% cotton cover and wool base combo for a lot less. The list does not reveal where the wool comes from or where the products are manufactured. But it says both the pad and cover are “untreated and chemical-free.” Despite the fact that EVERYTHING in the universe is made from chemicals and so “chemical-free” is a meaningless term, I think they mean that cotton and wool contain no flame retardants or perfluorochemicals.

It was worth knowing where the wool came from and supporting a local business, but I know not everyone would be willing to pay as much as I did for an ironing board mat. Or to spend time creating a cover. Do you think this is a good alternative?

You might not believe it, but the quality of your ironing board can have a huge impact on how quickly your tasks get done. The best ironing boards should have a supportive base, decent padding on top, and be able to hold your iron comfortably without fear of it falling over. That might not sound like much, but you’d be surprised how many manufacturers get it so wrong. Much like buying a quality iron, buying the right ironing board can greatly reduce the time it takes to get through that pile of clothes every week.

Whether you love your housework or hate it, we’ve made it easy for you to find the best ironing board. Below is our handy guide to choosing the right ironing board for your needs, including features to look out for. We’ve also rounded up some of the best ironing boards further down the page, so whatever your preferences, you can find your perfect pair.

READ MORE: Our pick of the best steam cleaners

Best Ironing Board: At a Glance

How to choose the best ironing board for you

Having a decent iron is only half the battle. If you iron regularly, you want an ironing board that is easy to set up and use, and convenient to store. Don’t forget the ironing board cover too – a burned ironing board surface looks dingy and could even ruin your clothes.

How important is retention?

Most large ironing boards fold flat for storage. Smaller tabletop versions are also available – handy for craft projects or quick touch-ups. In addition, you can get built-in models, which are usually installed in a drawer or closet. If you live in a small house or apartment where space is at a premium, one of the latter versions may be best for you, while larger homes with lots of closet space or a utility room give you more options. Some ironing boards also come with wheels, which is great for heavier models.

Which ironing board cover do I need?

An ironing board cover should be well padded and scratch-resistant and smooth. Many are treated with silicone to make them stain-resistant. A non-stick surface prevents clothes from sticking to the board, while a reflective surface allows you to work with more heat and get the job done faster.

What height and weight should I choose?

If your ironing job consists primarily of mending shirts and pants, you can probably get away with a simple ironing board; those who work regularly on full size garments like dresses and suits will want something more substantial. If you have space, opt for a full-size board that’s at least 4 feet long and 12 to 18 inches wide. The wider the better as it means you can spend more time ironing and less time rearranging garments.

Also think about the weight: a light board is easier to set up, fold and store – although it still has to be strong. If you have bumps in the floor, be sure to check if the legs are designed for it.

Any other features to consider?

Make sure the board has a metal mesh top as this will allow the steam to pass through and evaporate. Other extras to consider are a cable holder to prevent the cable from getting caught, a sleeve attachment (which attaches to the motherboard for sleeves and smaller items), an iron rest (to prevent the iron from falling off the board) and a Hanging shelf for storing clothes before putting them away.

READ MORE: The best hard floor cleaners

The best ironing boards to buy

1. Minky Velocity PearlActiv Ironing Board: The best for heat reflection

Price: £50 | Buy now at Minky

This large ironing board features Minky’s patented PearAactiv technology, which reflects heat for more effective ironing, while a thick foam base provides a smoother finish and stands the test of time. We love the modern finish and it includes handy features like a vape-proof angled rest and a good range of multi-height mechanisms that adjust easily. The legs are nice and sturdy which makes it feel secure and it comes at a good price. As for the claims for faster ironing, however, we’re not entirely convinced.

Main Specifications – Ironing surface size: 122 cm x 38 cm; Adjustable height: 0 cm to 92 cm; Weight: 5kg; Coverage: PearlActiv; Guarantee: 3 years

Buy now at Minky

2. Argos Home Small Ironing Board: The best ironing board under £20

Price: £17 | Buy now from Argos

Budget ironing boards tend to be very wobbly even when set up and feel like they could collapse at any moment. While this Argos model doesn’t quite measure up to the big boys in terms of feeling solid and secure, it’s impressively robust for its price. It has a machine washable cover and is easy to store away as it is relatively small and light. However, we couldn’t get it anywhere near the lowest height setting, making it a poor choice for shorter people. It also wasn’t very good on uneven ground.

Main Specifications – Ironing surface size: 97cm x 34cm; Adjustable Height: 51cm to 84cm; Weight: 3.4kg; Cover: 100% cotton, machine washable; 1 year warranty

Buy now from Argos

3. Lakeland Bright Blooms Ironing Board: The best all-round ironing board

Price: £50 | Buy now at Lakeland

Sturdy steel frame? Tick. Height adjustable and good for tall people? Tick. Machine washable cover? Tick. wide board? Tick. And so the list of pluses goes on, making it a great all-rounder for pretty much any ironing job. The specially designed bracket also means you can keep the cord from getting in the way when you’re ironing – although we’ve found that it can occasionally get tangled. However, we do recommend investing in an extra sleeve if you want a really well padded board and be warned that the board is quite heavy.

Main Specifications – Ironing surface size: 120cm x 40cm; Adjustable Height: 46cm to 97cm; Weight: 6.5kg; Cover: 100% cotton, machine washable; Guarantee: 3 years

Buy now at Lakeland

4. Brabantia steam-controlled ironing board: The most luxurious ironing board

Price: £138 | Buy now on Amazon

This super-sturdy ironing board weighs (and costs) twice as much as some competitors, but it packs some innovative features and precision engineering that make it incredibly smooth and easy to set up and store away. Highlights include the plastic tray to catch drips of water and a large, sturdy iron stand that can (unusually) hold a steam iron with a footprint of up to 36cm x 25cm.

The ironing board also includes safety features to prevent it from being knocked over by boisterous children. The only catch is that if you don’t have a storage space to leave it standing upright, you have to remember to empty the drip tray before storing it away. It costs a bomb but if you iron a lot it’s worth every penny.

Main Specifications – Ironing surface size: 124 cm x 45 cm; Adjustable Height: 75cm to 102cm; Weight: 9kg; Cover: 100% cotton, machine washable; Guarantee: 10 years

5. Addis Shirtmaster Ironing Board: The best choice for shirts

Price: £34 | Buy now from Argos

If your laundry pile consists mostly of shirts, you’ll love this ironing board, designed to make short work of it. You can use it to iron an entire side of a shirt from collar to hem in one go, greatly reducing the time you spend ironing your shirts. Thanks to the large ironing surface, it is also suitable for bed linen and the non-slip feet and the robust design ensure a secure footing.

Main Specifications – Ironing surface size: 125 cm x 41 cm; Adjustable Height: 79cm to 93cm; Weight: 5.5kg; Cover: 100% cotton; Guarantee: 10 years

Buy now from Argos

6. Brabantia ironing board D: The best for demanding ironing jobs

Price: £84 | Buy now on Amazon

Ironing surfaces don’t get much bigger (for home use anyway), making them a godsend for sheets. Its durable 35mm steel frame with non-slip protective caps should wash you for years to come. The integrated heat-resistant ‘parking zone’ means there is no separate resting place for your iron – it’s quicker to fold down and retrieve when needed – and there’s nowhere to pinch the cord.

The collapsible drying rack comes in handy when you don’t have a table nearby. The adjustable height is flexible enough to allow you to iron while seated and it’s good for tall people and there are plenty of locks to ensure the board doesn’t collapse even when kids get their mittens on it. Just make sure you have enough storage space as it’s a beast, albeit an attractive one.

Main Specifications – Ironing surface size: 135 cm x 45 cm; Adjustable Height: 61-102cm; Weight: 7.3kg; Cover: cotton with foam underlay; Guarantee: 10 years

Buy now on Amazon

To get the best results from your iron, you not only need a good ironing board, you also need a good cover.

A good ironing board cover can make all the difference between a wrinkle-prone garment and a completely wrinkle-free garment. With a smooth surface to iron on, you’ll spend less time ironing while getting better results.

Read on to see our most popular UK ironing board covers.

Best Ironing Board Covers in UK 1. riijk Ironing Board Cover Universal Fit

The riijk ironing board cover proves that it is possible to have an ironing board cover that looks good and works well too. The material is 100% natural cotton, so you don’t have to worry about any hidden inconveniences. The cover is incredibly easy to fit with an elasticated edge. It also comes with elastic clips if needed to ensure the perfect fit. The ironing board cover has a multi-layer construction with a layer that reflects heat upwards, making ironing faster even at low ironing temperatures. The padding is also breathable and prevents condensation. You can even buy this ironing board cover in grey, blue or pink for that aesthetic touch. Users report that the good heat transfer makes ironing lighter items even easier and the elasticated rim and straps ensure it fits perfectly on boards between 35-40cm wide and 115-120cm long. The board uses high quality materials and is very durable. See prices and reviews on Amazon.de. 2. Rayen ironing board cover

If you want an ironing board cover that has a unique look, the Rayen board cover is for you. This ironing board cover is micro-perforated, which makes steam ironing even easier. This is a three-layer ironing board cover with foam, flannel and finally a cotton outer layer. This ironing board cover is good value for money and the material is of good quality too. The Rayen ironing board cover is available in different sizes, so that extra large ironing boards up to a size of 150 x 55 cm can also be accommodated. However, some users find that the drawstring and toggle fastenings don’t hold the cover tight enough, meaning it can slip and move. See prices and reviews on Amazon.de. 3. Balffor Ironing Board Cover and Pad

The Balffor ironing board cover is fully adjustable to fit a range of wide ironing boards. The clips and elastic rim make the cover easy to attach and keep in place during use. It even has 6mm felt, 2mm foam and a 160gsm (grams per square meter) cover for a thick, luxurious feel. If you want an eco-friendly ironing board cover, this cover from Balffor is certified free from harmful chemicals and eco-friendly. The cover is fully machine washable and even comes with a 2 year guarantee. Most users report that the cover makes ironing much easier and feels durable. However, others report that it can be difficult to fit some types of ironing boards. Some people also find it’s not as heat resistant as others on this list. See prices and reviews on Amazon.de. 4. Smart&Gentle Turbo Ironing Board Cover

The smart&gentle turbo ironing board cover is available in different sizes and has a reflective layer that directs steam back into the garment, making ironing that much faster. To make fitting easier, this ironing board cover has a quick release buckle and three tension clips to fit a range of ironing boards perfectly. The five layers of the cover include two layers of foam, a cushion layer, a foil layer and a plush cotton layer. The combination results in a smooth ironing surface with good heat reflection. The case is proven to be non-toxic and even comes with a 2-year money-back guarantee. For most households, the turbo ironing board cover will help you achieve great results without annoying creases. The cover is thick and the reflective layer makes the ironing process faster. However, some people have found that the clips that keep this ironing board cover taut are a bit weak and could come loose. See price and reviews on Amazon.co.uk 5. Minky PP23006101 Supersize Smart Fit Cotton Ironing Board Cover

This Minky ironing board cover is incredibly affordable and can be used on ironing boards up to 145 x 54 cm. The material is built to last and can even be machine washed if needed. It has a thick felt backing for a smoother ironing surface and the bright patterns make an attractive addition to any home. The Minky cotton ironing board cover is an affordable choice that’s designed to fit almost any extra large ironing board, and the pre-stretched elastic edge is easy to fit. The cover is even machine washable to keep it fresher for longer. However, some users find that it’s not the best fit for very wide ironing boards and that the quality isn’t as good as others on this list. See prices and reviews on Amazon.de 6. Leifheit ironing board cover

The Leifheit ironing board cover features an easy-to-use drawstring to tighten and a hook-and-loop closure for an easy, tight fit. This ironing board cover is padded for smooth use, and the reflective surface should help reduce ironing time by up to a third. This ironing board cover is easy to use and offers a smooth ironing surface that even fits extra long ironing boards. The ironing board cover is Oeko-Tex certified as free of harmful substances and fits ironing boards up to a size of 140 x 45 cm. Leifheit prides itself on how easy it is to fit this ironing board cover and it is suitable for both conventional and steam irons. However, the durability and value for money of this ironing board cover aren’t as good as some of the others on this list. See prices and reviews on Amazon.de. 7. Brabantia replacement ironing board cover

Brabantia ironing board covers are one of the most affordable on this list and come in a variety of colors and patterns. The cover is made from 100% cotton and heat-resistant materials for durability and easier ironing. The 3D textile ensures faster ironing. Users love that this ironing board cover is a simple, no-frills cover that offers pretty good quality for the price. The stretchy material and cord closure make the cover easy and secure to fit on a range of ironing boards. However, some users report that the case isn’t very thick and that the material isn’t as good as some competitors and that the attachment cord doesn’t always keep the case tight enough. See price and reviews on Amazon.de

How to choose an ironing board cover

When choosing the right ironing board, you should consider several factors. This includes both functional and aesthetic aspects of the ironing board.

Type of ironing board

There is a range of ironing boards; not all are the stereotypes that just collapse! Some boards are portable and fold up smaller, others attach to furniture and fold easily out of the way. Check what type of ironing board you use before ordering an ironing board cover.

Size of the ironing board

The size of your ironing board is a crucial consideration as some ironing board covers are designed to fit a specific size, width or length of ironing board.

heat reflection

The purpose behind buying an ironing board cover is to protect the board itself from direct heat from the iron. Therefore, ironing boards should be made of materials that reflect heat.

Anti-slip

Nobody likes to iron, and that means people often try to do it as quickly as possible. To avoid problems, you want an ironing board with a non-slip design so it stays in place.

You want a fabric that isn’t too slippery and you also need to consider how the cover will be attached. If you’re a hectic cradle, you want a board cover that stays tight.

fastening method

You should also consider the method of attachment. Some ironing board covers are simply elastic while others may have drawstrings or tension clips. Some users may find some of these easier to install and others more difficult.

draft

Gone are the days when ironing board covers could only be found in boring color blocks. As you can see from our selection of top ironing board covers, you can now find these in a range of colors and styles depending on what you like.

Measuring an ironing board

An ironing board cover makes ironing so much easier, but it needs to fit properly to get the most use out of it.

measure board

Before you begin, it’s important that you remove the old ironing board cover, especially if it’s a padded one.

First you want to measure the width. Use a tape measure to measure the widest point at the top of the ironing board.

Next, measure the length of the ironing board at the longest point. Only measure the ironing board itself, the shelf on the back is not covered with a cover and therefore does not have to be counted.

Standard sizes for ironing board covers

Some ironing board covers may be designed to fit a range of sizes, but not all. There are five standard IBC sizes that ironing boards are commonly found in.

To find out how big your ironing board is, you need to measure it at the widest and longest points. These dimensions then correspond to a letter.

Size A: 110 x 30 cm or 43 x 12 inches

110 x 30 cm or 43 x 12 inches Size B: 124 x 38 cm or 49 x 15 inches

124 x 38 cm or 49 x 15 inches Size C: 124 x 45 cm or 49 x 18 inches

124 x 45 cm or 49 x 18 inches Size D: 135 x 45 cm or 53 x 18 inches

135 x 45 cm or 53 x 18 inches. E size: 135 x 49 cm or 53 x 19 inches

nose shape

Once you have measured your ironing board and found the size you need, you also need to consider the shape of your nose. Some ironing boards can have a rounded, pointed, or blunt nose. If you use the wrong shape ironing board cover, you may find that it is either too loose and unusable, or just too tight.

Frequently asked questions about ironing board covers

Do you need a cover for an ironing board?

A good ironing board should last for years and with a good ironing board cover it will last even longer. It can even help you get better results or speed up the ironing process itself.

How do you measure an ironing board for a cover?

All you have to do to measure an ironing board is measure the length at the longest point and the width at the widest point. If your ironing board is an uncomfortable size or you are not sure, you can always opt for a universal ironing board, like this one from riijk, which is suitable for widths between 35-40 cm and lengths between 115-120 cm.

How often should you change an ironing board cover?

Ironing board covers take the main load off. This means that they can end up being damaged or simply worn out. For this reason, it is generally recommended to replace ironing boards every 2 to 3 years, especially if you iron very frequently.

How long does an ironing board cover last?

Ironing board covers should last a few years or more depending on the material. Some standard cotton ironing board covers even come with a 2-year guarantee.

How do you attach an ironing board cover?

All good ironing board covers should come with something to hold them in place. Some ironing board covers simply have an elastic edge holding them in place, while others may use clips, elastic cords, or pins.

What is the best material for an ironing board cover?

Ironing board covers are available in different materials. Most are cotton, and this works well for most homes. However, if you find that you find yourself having to replace your ironing board cover more often than you would like, it may be worth looking into a more durable alternative.

Covers made from metallized cotton, for example, are reinforced with metal that reflects heat back into the garment. This not only speeds up the ironing process, but is also much more durable than cotton alone.

Another type of ironing board material that is much more durable than cotton alone is silicone. Silicone sleeves are non-slip and both fire and stain resistant.

Can you wash an ironing board cover?

Most cotton ironing board covers can be either machine washed or hand washed. Always check the care label before putting in the washing machine as the fire retardant properties of certain materials could be affected by machine washing.

Conclusion

When it comes to ironing board covers, we recommend the padded cover from riijk. It might be one of the more expensive options, but the cover is smooth, easy to use, and made from only natural cotton fibers. It can even be machine washed for messy households.

Ironing board covers are washable and you do not need any special detergents. Show more photos

Ironing board covers protect your clothes not only from dirt and debris on the fabric, but also from the imprint of the frame of the ironing board on your clothes. Covers are available to fit a variety of ironing board types and sizes, including benchtop and freestanding models. Like other materials, ironing board covers are not immune to dust, dirt, and debris from your iron.

advertisement

video of the day

To wash

You can wash an ironing board cover to remove dust, dirt, and debris from its fabric. Each cover includes a care label that provides manufacturer instructions on how to clean the item. If the care label says the cover should be hand washed, or the cover does not have a care label, remove the cover from the frame of the ironing board, and then dampen a sponge with lukewarm water. Apply a mild detergent to the sponge, wring out any excess and wipe the cover with the damp sponge.

advertisement

machine wash

If the care label on the ironing board cover states that the item is to be machine washed, place it in your home washing machine along with mild detergent and cold water. Set the machine to a gentle or delicate cycle and have the cover washed. If the cover is old or frayed, you may want to remove it from the washing machine before the spin cycle begins to prevent the cover from coming loose.

advertisement

dry

Hang the ironing board cover on a clothesline, drying rack or flat surface to dry. Do not tumble dry the cover at home – the heat from the tumble dryer can damage any coatings on the cover.

advertisement

Regular grooming

Wash your ironing board cover regularly to prevent dirt from getting on your clothes. To clean the ironing board frame, remove the cover and then spray the frame with an all-purpose cleaner or clear water. Wipe the frame with a sponge or a clean rag. Dry the frame, including all ventilation holes, with a clean rag or cloth before replacing the cover. When replacing the cover, make sure you pull the cover firmly onto the ironing board frame so there are no creases, then set your iron to its highest setting and iron the cover to smooth out any small creases.

You’re ironing your favorite white shirt when—suddenly! — The iron leaves a brown stain on the sleeve. darn it!

This can be caused by burnt-on spray starch, melted synthetic fabric, or rusty water in the tank. Whatever the reason, the soleplate of an iron should be cleaned whenever there is visible residue or it no longer glides smoothly. Follow these tips from Meg Roberts, President of the Molly Maid Dry Cleaning Service, to keep your clothes iron-free and iron stains a thing of the past.

Want more tips straight to your inbox? Sign up for our Everyday Solutions newsletter.

For sticky spots:

Believe it or not, newspaper makes a great iron cleaner. (You can also use paper towels or a dry cotton towel.)

Start by setting the iron on the highest setting (do not use steam) and run the hot, dry iron over the paper towel until clean. If additional rubbing is required, sprinkle a tablespoon of salt on newspaper and repeat the process. To rinse off residue, once cool, run the iron over a damp, clean towel.

How to remove oily substances:

To remove oil from the soleplate, unplug the iron and allow it to cool. Wipe the entire soleplate with a cloth dipped in white distilled vinegar. Rinse with a damp cloth. If oily stains remain, wipe with a cloth dipped in ammonia. Rinse with a damp cloth. Dry completely.

How to remove stains:

To remove mineral deposits from the soleplate, apply a paste of baking soda and water to the affected area and scrub with a damp cloth. Wipe clean with a damp cloth.

To remove mineral deposits from the air vents, scrub the air vents with a cotton swab and some baking soda paste. Wipe off with a damp cotton swab.

If the iron leaves brown water stains on clothes when using steam, it’s time to clean the container. Empty the container completely and fill it up with 1/4 cup distilled white vinegar and 3/4 cup distilled water. Set the iron to full steam and run it back and forth over an old towel until the container is empty. If the iron has a spray option, spray until the water no longer appears discolored. Refill the container with distilled water and repeat the process to ensure all mineral residue is gone.

To avoid future stains and mineral deposits, only use distilled water (it does not contain dissolved minerals) and completely empty the reservoir before storing the iron.

As always, follow the manufacturer’s instructions for cleaning your particular iron. If you have misplaced the manual, check to see if the online version is available on the manufacturer’s website.

This article was originally published on November 27, 2017.

Do you want to replace a Brabantia ironing board cover?

Ironing board cover A = our size M

Ironing board cover B = our size L

Ironing board cover C = our size XL

Ironing board cover D = our size XL

Ironing board cover E = our size XXL

Would you like to replace a Leifheit ironing board cover? Then you can choose our sizes S to XL for the Leifheit sizes S to XL.

Go to the Ironing Board Covers menu to order your ironing board cover in the color and size you want.

If you’ve only used cheap, wobbly ironing boards, you’re probably working too hard. A solid board with a smooth top layer and the right amount of compliance makes the job easier. Since 2015 we’ve spent 54 hours researching and testing 22 boards and mats and our two-time winner, the Brabantia Ironing Board B is still our favourite. It’s the best we’ve tried for the price – it’s durable, won’t wobble, and is just the right size.

The Brabantia Ironing Board B is the best ironing board I’ve ever used – it’s stronger and lighter than more expensive ironing boards I’ve tested, but it’s a fraction of the price. The Brabantia B opens silently and folds compactly, making it convenient to use and easy to store in a small apartment or laundry room. We also like that it comes with a 10-year guarantee, indicating that Brabantia is confident its ironing board will last. I’ve been using this board regularly since early 2017 – even moved it across the country – and it looks as good as new. The iron rest is firmly attached, which isn’t ideal if you like using the angled end of the board. But the Brabantia B is one of the few stands I’ve tried that really holds an iron steady, and the cords don’t get tangled between the iron rest and the board (an issue with several other models I’ve tested).

advertisement

For an oversized, stable ironing board, we prefer the Homz Durabilt DB100 premium steel plate ironing board. If you’re tall or need more space for large projects, the Homz is 1½” taller than the Brabantia B, giving you 5″ more length to work with. The Homz is just a hair less stable, but it’s still very stable, which is particularly impressive considering its size (other large boards we’ve tried were more wobbly). Its extra wide legs ensure it stands firmly on the ground and it can support the weight of the largest and heaviest blankets and quilts. The Homz also has a removable iron rest, so unlike the Brabantia B, both ends of the board are easily accessible. The Homz’s legs can be difficult to open. And this board takes up more storage space and is more expensive than the Brabantia B, but we’ve recommended it since 2016 and still find it sturdy and reliable.

Countertop ironing boards can be fiddly and unstable, but the Honey-Can-Do Countertop Ironing Board with Iron Rest is sturdy and useful, and it’s a good choice if you don’t need (or don’t have the space for) a full-fledged ironing board. Size ironing board. I tested it again in 2015 and 2019 and it’s still the best little board I’ve tried. It’s also a fraction of the price of our full-size recommendations. Whether it’s sitting on top of your washing machine or tucked away in your closet, the Honey-Can-Do handles shirts and linens with ease. But it’s not long enough to iron pants on unless you’re working in sections. It comes with a limited lifetime warranty (the longest of our picks).

The Above Edge Magnetic Ironing Mat is the most convenient of our storage tips, and it’s the only one that can turn any tabletop, counter, or washing machine into an instant ironing surface. It’s a little more awkward to use though, as you often have to keep a hand on the mat to steady it on a smooth surface (it has magnets to attach to metal). It’s not as effective for ironing dresses, button-down shirts, or other highly detailed garments, but it works for small, quick jobs when pulling out an ironing board is too tedious. The Above Edge is also great for keeping on a sewing table when you want to easily iron seams.

Ironing board cover size. Can you believe it? I usually do them at the end, which is a bit schlep. Now, armed with the correct measurements and a template I cut for the shaped end, I set out to find a cover. Thanks again.”

…”

“Thank you. What a comprehensive and helpful article. I’m 79 and have yet to purchase the right one

You can clean your iron, but you might not think of cleaning the ironing board. Well you should! Like almost everything else in your home, your ironing board can use a little care and maintenance every now and then. Read these tips to learn how to clean an ironing board.

ironing board cover

Remove the cover from the circuit board and read the label. Some ironing board covers can be machine washed. To do this, simply throw them in the washing machine with your regular detergent and wash them on the gentle cycle for a full cycle.

For covers that cannot be machine washed, clean specific problem areas. For sticky starch stains, use 1 cup water, 1 cup vinegar, and 3 tablespoons baking soda in a spray bottle. Spray this solution on the area. Leave it on for a minute and then wipe away the dirt with a damp cloth.

While many covers can be machine washed, don’t throw an ironing board cover in the dryer. The extreme heat will damage the cover. Simply hang the cover on a drying rack or clothesline to air dry. Clean ironing board

Clean an ironing board

Set up the ironing board as usual. Remove the cover and pad. Wipe the board with a damp cloth. Don’t forget to check for cobwebs under the board and wipe the legs too. Allow the ironing board to dry completely before replacing the cover and mat.

ironing board care

Keep the front of your iron away from the cover. Leaving the iron on the cover can damage the cover or pad or even cause a fire if the iron is left there for too long.

Clean your iron cover regularly. This prevents dust and dirt from being transferred from the cover to your clothes.

Again, don’t forget to check the label before cleaning! Find out about the cleaning and maintenance instructions recommended by the manufacturer.

We also want to reiterate to allow all parts to dry completely before reassembling them. Otherwise, you’ve trapped moisture, which can lead to mold growth!

Clean an ironing board for cleaner clothes

When you iron your clothes, you take care of your belongings and your appearance. A cleaner ironing board helps you with both things by helping you have cleaner, fresher clothes. If your ironing board is looking worn and overused, use these tips to freshen it up.

Now it’s time to clean your iron.

Whilst every care has been taken to ensure product information is correct, food products are constantly being reformulated so ingredients, nutritional value, nutrition and allergens may change. You should always read the product label and not solely rely on the information on the website.

If you have any questions or would like advice on Tesco branded products, please contact Tesco Customer Service or the manufacturer of the product if it is not a Tesco branded product.

Whilst product information is updated regularly, Tesco cannot accept liability for inaccurate information. Your statutory rights remain unaffected.

This information is provided for personal use only and may not be reproduced in any way without the prior consent of Tesco Stores Limited or without due credit.

Copyright 2022

We all have clothes that need ironing, especially work clothes. It’s important that they look good. A lot can go wrong when ironing. From the wrong iron temperature to poor technique, you never know when you might actually damage your garments. Luckily we have some expert tips to teach you how to iron clothes properly.

do it in the bedroom

Many think that ironing should also be done in the laundry room or laundry room. In reality, it is better to put your ironing board in the bedroom. This way you have plenty of space to sort pre-ironed clothes and lay out freshly ironed clothes. This gives you more freedom of action! It also takes a lot less time to hang clothes in the closet when you’re already in the room.

Get your ironing board straight

Before you start ironing, you need to make sure your board is flat and level. It should have a clean, tightly wrapped wrapper. Even a small bump in your board can cause wrinkles.

Check the base of your iron

We often forget to check the soleplate of our iron for stains before we use it. This allows you to easily color your favorite items. It is recommended to do a test run on a rag. If the plate is dirty, leftovers will quickly show up.

You can clean the base plate with household products. Make a paste by mixing baking soda and water. Apply directly to the plate with a clean, damp cloth.

Use the correct temperature for each garment

You cannot use the same temperature setting for all fabric types. Surely you’ve seen silk dresses burned by extremely hot irons. To avoid this, remember to sort your clothes according to temperature requirements.

Delicate fabrics and synthetics such as lace, silk, nylon and polyester should be grouped and ironed at a very low temperature. For more protection on plastic, you can put a press cloth on it to prevent the plastic from melting and showing a shiny surface. Cotton, on the other hand, can withstand high temperatures. Others play it safe by using automatic temperature setting.

Use foil to speed up the process

Do you want to reduce your ironing time? If you want to work more efficiently, you can put aluminum foil under the cover of your ironing board. This reflects the heat placed on its surface. This will iron both sides of your clothes at the same time.

Deal with stubborn wrinkles

Have you ever ironed a piece of clothing and noticed that it keeps getting wrinkles when you turn it? Don’t worry; There are simple solutions to this problem.

Get a clean towel, roll it up, and slip it inside your shirt. It acts as a mold and keeps the shirt shape so you can iron it all the way around without accidentally wrinkling it.

You can also use an anti-crease spray for clothes. A simple starch mixed with water can help remove deep wrinkles.

Turn out your pockets

This is a very simple trick, but one that is often forgotten. To prevent creating a pocket line, turn inside out before ironing the area.

Iron cuffs, collar and hems inside out

Ruffles at collars, cuffs, and hems are also common. To avoid this problem, iron these areas inside out.

If you decide to leave your collar on, apply some starch and cover with a press cloth. Apply medium heat and pressure. When you’re done, keep its shape by buttoning the shirt’s top button before hanging.

Don’t forget the center seam

Do you want your trousers to look professional or formal? The secret to getting that professional-looking centerline down the leg of your pants is to press them sideways. Lay the leg flat on the board and iron the seams with less pressure.

Hand dry your clothes

When you hang your wet laundry out to dry, gravity will pull those folds down. When using a dryer, use a setting that gives slightly damp clothes. Iron immediately before they dry completely.

How to save money and time with an anti-crease spray for clothes and ironing.

There you have it: our top tips for ironing clothes professionally! If you think you’re short on time or not ready to take on the challenge, just leave your laundry with us! As a trusted dry cleaner in Durango, CO, we offer comprehensive washing, folding and ironing services. Call us now at (970) 903-1642!