Are you looking for an answer to the topic “crushed glass grip tape“? We answer all your questions at the website https://chewathai27.com/ppa in category: https://chewathai27.com/ppa/blog. You will find the answer right below.
Table of Contents
HOW TO MAKE YOUR (SKATEBOARD) GRIP TAPE LOOK LIKE SHATTERED GLASS!! EASY TUTORIAL!!!
See some more details on the topic crushed glass grip tape here:
Lucid Clear Spray on Grip Tape
Clear Spray on Grip tape for all types of finished surfaces. Works on wood, tile, plastic, fiberglass, and much more. Glow Grip available now.
Source: www.lucidgrip.com
Date Published: 7/9/2021
View: 4795
Forget the grip use Glass Frit – How-Tos & Esk8 mechanics
… steps I use for putting a layer of glass frit on the board as griptape. … I shredded my fingers grabbing my board with blood orange.
Source: forum.esk8.news
Date Published: 7/14/2022
View: 4676
Smashing Glass: How to grip your skateboard deck with coke bottles
Smashing Glass: How to grab your skateboard deck with Damon Wood coke bottles
I’ve always loved Coca-Cola. Ever since I was a kid, the gleaming red, black, and chrome machines filled me with joy and anticipation of the bubbling cold taste that would fill my face. I have some collectible bottles, some t-shirts, Christmas ornaments, toys and even an old wooden wagon made out of a coke crate. I just like Coca-Cola stuff.
Then one day I heard about people smashing bottles to create grippy surfaces for different things. In that moment I knew I had no choice. I had to grab my boards with broken coke bottle glass. Basically, the only thing that could make the Scarlet series decks even more metallic than they already are would be to cover the top with broken bottles.
First I had to build a Smasher. I saw a guy on YouTube smashing things in a metal pipe so I figured this would be the best solution. I kept hearing about this surplus store near me that I was planning to visit anyway, so one day I loaded my older kids in the car and we drove out. Turns out they had scrap metal too, so we grabbed a steel pipe and a steel plate and then found a long and heavy steel rod. My then 12 month old was getting fidgety so after walking around a bit we paid and went with the iron.
A few days later I made the smasher with the steel pipe and a cinder block. After taping the floor with this magic blue 3M tape, I simply placed a cinder block over the tape, set the pipe inside it upright and centered in one of the cinder block holes, and then filled it in with cement. When it dried I got what you see below.
It is important to only hammer in the pipe when the pipe is placed over the steel plate. If you put this pipe on concrete and fill it with broken bottles and start smashing, you destroy the concrete. Hold it over the steel plate and you’ll be golden.
Take a piece of poster board and place it next to the plate. Lay one of your bottles on its side on the billboard and cover it with a folded towel. Using a small hammer, smash the coke bottle by striking it sharply around the waistline. It should only last a hit or two if you make a few and see them pop. The towel keeps the glass from flying all over the place, meaning there is now glass in the towel. Gently lift the towel and shake the glass on the billboard, then fold the towel and set aside.
With gloved hands, pick the glass pieces from the stack and drop them into the tube. Use a wide brush or other small sweeping implement to scoop up the rest and add that to the tube as well. If the stack is too small to wear gloves, pick up the ends of the poster board to form a funnel and pour the remaining glass into the tube. Now the fun begins.
You should wear a mask for this next part. You don’t want to inhale glass dust, it could do bad things once it gets into your lungs. You should also wear safety goggles so chunks flying out of the tube don’t blind you or leave you with an awkward look. Once you’ve put on a mask and goggles, grab your gloves and place that heavy steel bar inside the pipe. Use it to smash the glass by repeatedly raising and thrusting the stick down into the tube of shards.
After about 10 or 15 minutes of crushing, slowly tip the tube over to reveal the pile of crushed glass. Sweep the whole stack onto the billboard with your brush, then set the tube upright again. There will still be a lot of chunks in the pile so use your gloves and take out the chunks and put them back in the tube. You will also notice a little rust in the grit. Don’t worry, it won’t survive the sieving process. Once the chunks are picked out, grab your larger sieve and start adding the finer grit one at a time. Carefully sift the finer grit and dust out of the pieces and into a small container. Place the larger pieces back into the tube. When the stack starts getting smaller again and you’ve sifted out all the dust and sand, take the ends of the poster board and tuck the rest of the stack back into the tube, then place the poster board back next to the steel plate. Repeat this process until your little bin is full of dust and sand.
Grab another small container and also another colander, this time with a finer mesh. Pour the dust and grit over a trash can or other large waste bin into the finely sifted screen and allow the finer dust to sift out. What’s left is a slightly larger grit, and that’s what you want to keep. In small amounts at once, sift all the dust from dust and grit and put the grit in the second container.
If you did that with two coke bottles, you should now have enough gravel. Depending on the desired grit density, it should be enough for several decks. I prefer a lower density that allows the board to show through.
Now all you need is a deck to grab and some urethane brush. I use Spar Urethane by Minwax. IT is designed for outdoor furniture and offers UV protection. It’s pretty tough stuff. Tape your board with any pattern or border style you like. This is of course completely optional. You could grab the entire surface and even the edges if you wanted, but I like a nice border. Here’s my scarlet electric skateboard deck that I recently stiffened with some fiberglass along the bottom channel. I’ve colored it, branded it and it’s ready to grab.
After you tape the panel (or don’t tape the panel), spread a coat of urethane thick enough to stay wet but not too thick. We want to sand the urethane while it’s still wet, but we don’t want the urethane to be thick enough to flow all over the place or collect in the concave curves. Scarlet has a W concavity so this was a particular concern for me. Normal concave decks would probably pool in the middle, but mine wanted to flow down the sides.
Once you have a nice layer of wet urethane in place, sprinkle the grit onto the board from a reasonable height so that it falls randomly and evenly across the surface. That too is of course entirely up to you. You could throw in a pattern and get artistic with it. When you have the desired grit on it, remove your tape while the urethane is still wet.
Allow to dry for a few hours until stiff but still tacky, then brush or dab on a final coat of urethane to permanently lock in the grit. Of course, you should pay attention to the unglued areas and gently dab along the edges so the urethane doesn’t run into the clean areas.
Once this is dry you can apply another coat of top coat to the non urethanised areas to give a nice shine using a good quality clear coat in a spray can. Here is a shot of the finished product:
I like clean edges and sharp edges and these didn’t disappoint.
And finally, coke bottle handle on a Black Metal Edition Scarlet, because the only thing that could possibly make this deck even more metal than it already is is to cover the top with chunks of glass thrown by a guy with long hair and an iron stick were shattered .
Happy smashing!
Mob Shattered Clear Grip Tape
Mob Shattered Clear Griptape
Item # 342902 Stash Points: 999 (?) This is the number of points you will receive in The Zumiez Stash for purchasing this item. Stash points can be redeemed for exclusive rewards only available to Zumiez Stash members. To redeem your points, view the rewards catalog at thestash.zumiez.com.
Get a Grip Crush Some Glass.
About: I’ve spent my life finding alternative ways to complete every task, despite many challenges. Most of my projects are, as we say, how we do things, Fabrecobled (to make (fabricate) something out of whatever…
The recycling system (imperfect as it was) has completely collapsed. This is a way to reuse some of the used glass you may have in your trash or scrap bin.
Some surfaces just need traction to avoid unwanted slickness; Skateboards, boat decks, gear, etc. I use the technique of adding finely ground glass and polyurethane to my skate decks and have thought about applying this type of grip to the footplates of our tractors. Today I’m going to teach you how to crush glass and apply it to a surface. I will be using colored glasses to apply a patterned graphic to a skate deck. (This is a stand alone part of a skateboard build as there is no instructable glass crushing) See the skateboard build.
(Pic 1 of this build complete. Designed by 4 year old offspring)
(Pic 2 first experiment with glass handle; no top coat crazy sharp.)
(Pic 3 experimenting with colored glass for designed grip and topcoats, much better)
Related searches to crushed glass grip tape
Information related to the topic crushed glass grip tape
Here are the search results of the thread crushed glass grip tape from Bing. You can read more if you want.
You have just come across an article on the topic crushed glass grip tape. If you found this article useful, please share it. Thank you very much.
