당신은 주제를 찾고 있습니까 “norsok l 001 – LACOSTE L001 TRỞ THÀNH ĐÔI SNEAKERS YÊU THÍCH NHẤT CỦA AD!“? 다음 카테고리의 웹사이트 Chewathai27.com/you 에서 귀하의 모든 질문에 답변해 드립니다: Chewathai27.com/you/blog. 바로 아래에서 답을 찾을 수 있습니다. 작성자 SNKRVN 이(가) 작성한 기사에는 조회수 6,911회 및 좋아요 199개 개의 좋아요가 있습니다.
Table of Contents
norsok l 001 주제에 대한 동영상 보기
여기에서 이 주제에 대한 비디오를 시청하십시오. 주의 깊게 살펴보고 읽고 있는 내용에 대한 피드백을 제공하세요!
d여기에서 LACOSTE L001 TRỞ THÀNH ĐÔI SNEAKERS YÊU THÍCH NHẤT CỦA AD! – norsok l 001 주제에 대한 세부정보를 참조하세요
LACOSTE L001 – Đôi sneakers rất thú vị mà SNKRVN là một trong những người đầu tiên được trải nghiệm tại Việt Nam.
Logo Cá sấu (CROCS) được sinh ra như thế nào? René Lacoste đã phát triển thương hiệu từ bộ môn thể thao gì? L001 mang trong mình triết lý thiết kế và câu chuyện ra sao?
Khám phá cùng SNKRVN trong video đánh giá sản phẩm lần này nhé!
@Lacoste
#Lacoste #LacosteL001 #LacosteSneakers #LacosteVN #LacosteVietNam #L001 #sneakers #snkrvn
—
For up-to-date news and more: https://snkrvn.com/
View more videos: https://www.youtube.com/c/SNKRVNTV
Stay connected with us on your favorite social media platform:
https://www.facebook.com/SNKRVN/
https://www.instagram.com/snkrvn/
https://www.twitter.com/snkrvn
#SNKRVN #SNEAKERVIETNAM #sneakers #Streetwear #Fashion #Sportswear #lifestyle
norsok l 001 주제에 대한 자세한 내용은 여기를 참조하세요.
L001
NORSOK STANDARD. Icon PIPING AND VALVES Icon. L-001. Rev.3, September 1999. This NORSOK standard is developed by NTS with broad industry participation.
Source: www.jsc.no
Date Published: 1/28/2021
View: 4490
NORSOK L-001:2017 – Standard Norge
NORSOK L-001:2017 was adopted as a NORSOK Standard in January 2017. It replaces the 1999 edition. This standard should be seen in conjunction with other NORSOK …
Source: www.standard.no
Date Published: 4/19/2021
View: 7216
NORSOK L-001:2017 – Techstreet
NORSOK L-001:2017. Piping and valves. standard by NORSOK, 01/01/2017. View all product details. Most Recent.
Source: www.techstreet.com
Date Published: 8/28/2021
View: 5638
Norsok L 001 – · PDF fileThe use of the piping materials …
Norsok L 001.pdf Free Download Here NORSOK STANDARD S-001 Technical safety …
Source: fdocuments.net
Date Published: 1/3/2021
View: 2045
Norsok Standard L-001 – Free Download PDF – KUPDF
A telephone system according to Company requirements shall be installed. The system shall prove internal and external switched telephone …
Source: kupdf.net
Date Published: 12/4/2021
View: 9308
NORSOK – L-001 – Piping and valves – Standards – GlobalSpec
General This specification defines the requirements for the design, manufacturing, assembly, testing, and documentation of ball, check, gate, …
Source: standards.globalspec.com
Date Published: 7/5/2021
View: 9705
Norsok L 001 – · PDF fileThe use of the piping materials …
NORSOK standard M-001 Rev. 4, August 2004 NORSOK standard Page 2 of 30 Foreword The NORSOK standards aredeveloped by the Norwegian petroleum industry to ensure …
Source: fdocuments.in
Date Published: 8/27/2021
View: 6047
Norsok l 001 pdf – PDF4PRO
Material data sheets and element data sheets for piping, Norsok l 001 pdf. … NORSOK standard M-630 Edition 5, September 2010 NORSOK standard Page 4 of 133 …
Source: pdf4pro.com
Date Published: 3/30/2022
View: 5758
주제와 관련된 이미지 norsok l 001
주제와 관련된 더 많은 사진을 참조하십시오 LACOSTE L001 TRỞ THÀNH ĐÔI SNEAKERS YÊU THÍCH NHẤT CỦA AD!. 댓글에서 더 많은 관련 이미지를 보거나 필요한 경우 더 많은 관련 기사를 볼 수 있습니다.
주제에 대한 기사 평가 norsok l 001
- Author: SNKRVN
- Views: 조회수 6,911회
- Likes: 좋아요 199개
- Date Published: 최초 공개: 2022. 1. 19.
- Video Url link: https://www.youtube.com/watch?v=wGf73odDkVc
L001
NORSOK STANDARD
PIPING AND VALVES
L-001
Rev.3, September 1999
This NORSOK standard is developed by NTS with broad industry participation. Please note that whilst every effort has been made to ensure the accuracy of this standard, neither OLF nor TBL or any of their members will assume liability for any use thereof. NTS is responsible for the administration and publication of this standard.
Norwegian Technology Standards Institution
Oscarsgt. 20, Postbox 7072 Majorstua
N-0306 Oslo, NORWAY
Telephone: + 47 22 59 01 00 Fax: + 47 22 59 01 29
Email: [email protected] Website: http://www.nts.no/norsok
Copyrights reserved
CONTENTS
FOREWORD
INTRODUCTION
1 SCOPE
2 NORMATIVE REFERENCES
3 DEFINITIONS AND ABBREVATIONS
4 DATA SHEET INTRODUCTION
5 PROJECT REQUIREMENTS AND INFORMATION
6 PROJECT SERVICE LISTING
ANNEX A Service Code Sheets (SC)
ANNEX B Piping Class Data Sheets (PCS)
ANNEX C Element data sheets (EDS)
ANNEX D Valve Selection Manuals (VSM)
ANNEX E Valve Data Sheets (VDS)
ANNEX F Valve specification key (VSK)
ANNEX G Material Data Sheet (MDS)
NORSOK L-001:2017
Overvåking
Overvåking er en gratistjeneste for deg som ønsker å få melding om endringer i forbindelse med standarder som du trenger i din virksomhet. Så fort det foreligger nye utgaver av standardene du har registrert overvåking for, eller dersom det kommer tillegg eller endringsblader, vil melding bli sendt til deg på e-post. På denne måten sparer du tid og penger, og vil alltid være sikker på å kjenne til siste utgave av standardene som er viktige for deg.
For å legge til en standard i overvåking må du være logget inn. Er du en fellesbruker (hvor du ikke logger deg på med en epostadresse) har du dessverre ikke muligheten til dette. Om du ønsker å legge standarder i overvåking må du registreres med eget brukernavn og passord.
NORSOK L-001:2017
Secure PDF Files
Secure PDF files include digital rights management (DRM) software. DRM is included at the request of the publisher, as it helps them protect their copyright by restricting file sharing. In order to read a Secure PDF, you will need to install the FileOpen Plug-In on your computer. The FileOpen Plug-In works with Adobe Reader and other viewers. Visit FileOpen to see the full list.
What you can do with a Secure PDF: Print
Search
Highlight
Bookmark
Please note that some publishers – including BOMA, IADC and ICML – do not allow printing of their documents.
· PDF fileThe use of the piping materials according to NORSOK L-001, NORSOK M-601 and this NORSOK standard will result in some deviations from ASME B31.3. NORSOK
Norsok L 001.pdf
Free Download Here
NORSOK STANDARD S-001 Technical safety
http://www.govmin.gl/images/stories/petroleum/norsok/S-001_e4_Technical_Safety.pdf
NORSOK standard S-001 Edition 4, February 2008 NORSOK standard Page 3 of 70 Foreword 6 Introduction 6 1 Scope 7 2Normative and informative references 7
Material data sheets and element data sheets for piping
http://www.norsok-mds-d47.de/pdf/norsok.pdf
The use of the piping materials according to NORSOK L-001, NORSOK M-601 and this NORSOK standard will result in somedeviations from ASME B31.3.
NORSOK STANDARD
http://jadelltd.com/wa_files/Norsok_20-_20Piping_20Standards_20-_20L-003-CR.pdf
NORSOK L-CR-001 Piping and valves 4 DEFINITIONS AND ABBREVIATIONS 4.1 Definitions Normative references Shallmean normative in the application of NORSOK standards.
www.rederi.no
http://www.rederi.no/nrweb/mm.nsf/lupgraphics/AoC%20handbook%20R3%20english%201%20July%202006.doc/$file/AoC%20handbook%20R3%20english%201%20July%202006.docNORSOK: S-001 S-002N, L-001, L-002, P-001, P-100, R-004, , M-001, M-601. ISO: 6385, 13702 No No 302B SeparationEquipment (including water treatment) As in 301B.
Material Data Sheets for the Construction of Piping Systems
http://www.pdhonline.org/courses/m184/Material%20Data%20Sheets%20for%20piping%20M-630.pdf
The use of the piping materials according to NORSOK Standards (L-CR-001, M-630 and M-601) will result in some minordeviations from the ASME B31.3 code.
NORSOK STANDARD M-001
http://davidmuir.com/offshore/ODB/Norwegian_Codes/M-001.pdf
NORSOK standard M-001 Rev. 4, August 2004 NORSOK standard Page 2 of 30 Foreword The NORSOK standards aredeveloped by the Norwegian petroleum industry to ensure …
Det er disse spesifikasjonene som denne diplomoppgaven tar …
http://ndt.esrtechnology.com/noticeboards/mms15/Documents/CPD4DUTProceduresRevised30August2000/CPD4DMeetingMay2000/MelveSTATOIL.doc
1 / 2
http://www.pdfsdocuments2.com/out.php?q=Norsok+L+001
Norsok Standard L-001
NORSOK STANDARDT-001 Edition 4, February 2010Telecom systemsThis NORSOK standard is developed with broad petroleum industry participation by interested parties in the Norwegian petroleum industry and is owned by the Norwegian petroleum industry represented by The Norwegian Oil Industry Association (OLF) and The Federation of Norwegian Industry. Please note that whilst every effort has been made to ensure the accuracy of this NORSOK standard, neither OLF nor The Federation of Norwegian Industry or any of their members will assume liability for any use thereof. Standards Norway is responsible for the administration and publication of this NORSOK standard. Standards Norway Strandveien 18, P.O. Box 242 N-1326 Lysaker NORWAY Copyrights reservedTelephone: + 47 67 83 86 00 Fax: + 47 67 83 86 01 Email: [email protected] Website: www www.standard.no/petroleum .standard.no/petroleum0 2 4 0 4 1 0 2 s a g r a V + r a c s O r o f S A e n i l n O d r a d n a t S y b d e d i v o r P0 2 4 0 4 1 0 2 s a g r a V + r a c s O r o f S A e n i l n O d r a d n a t S y b d e d i v o r PNORSOK standard T-001Edition 4, February 2010ForewordIntroductionScope2.1 2.2Normative and informative references Normative references Informative references5 6 63.1 3.2Terms, definitions and abbreviations Terms and definitions Abbreviations6 6 64.1 4.2Requirements for telecommunication systems General Telecommunication subsystems7 7 75.1 5.2 5.3 5.4System design Emergency communication Telecommunication equipment location Ignition source control for telecommunication systems Common requirements for system design10 10 11 13 14Telecommunication cable requirements15Telecommunication installation General Equipment location Telecommunication cable installation requirements General cable installation requirements Equipment earthing and bonding Marking and labelling Bulk materials16 16 16 17 17 18 18 196 7 7.1 7.2 7.3 7.4 7.5 7.6 7.7Annex A (Normative) Data sheets for field equipment21Annex B (Informative) Typical installation drawings31NORSOK standardPage 3 of 360 2 4 0 4 1 0 2 s a g r a V + r a c s O r o f S A e n i l n O d r a d n a t S y b d e d i v o r PNORSOK standard T-001Edition 4, February 2010Foreword The NORSOK standards are developed by the Norwegian petroleum industry to ensure adequate safety, value adding and cost effectiveness for petroleum industry developments and operations. Furthermore, NORSOK standards are, as far as possible, intended to replace oil company specifications and serve as references in the authorities’ regulations. The NORSOK standards are norm ally based on recognised international standards, adding the provisions deemed necessary to fill the broad needs of the Norwegian petroleum industry. Where relevant, NORSOK standards will be used to provide the Norwegian industry input to the international standardisation process. Subject to development and publication of international standards, the relevant NORSOK standard will be withdrawn. The NORSOK standards are developed according to the consensus principle generally applicable for most standards work and according to established procedures defined in NORSOK A-001. The NORSOK standards are prepared and published with support by The Norwegian Oil Industry Association (OLF), The Federation of Norwegian Industry, Norwegian Shipowners’ Association and The Petroleum Safety Authority Norway. NORSOK standards are administered and published by Standards Norway. Annex A is normative and Annex B is informative.Introduction Editon 4 of this NORSOK standard replaces edition 3 of December 2003. The standard has been restructured compared to the previous version. Telecommunication installation has been included as a new clause in this NORSOK standard. This clause replaces the NORSOK Z-010 regarding telecomm unication installation.NORSOK standardPage 4 of 360 2 4 0 4 1 0 2 s a g r a V + r a c s O r o f S A e n i l n O d r a d n a t S y b d e d i v o r PNORSOK standard T-001Edition 4, February 2010ScopeThis NORSOK standard describes the basis for design, engineering and installation of telecommunication systems for an offshore installation. The subsystems given revision status in the table below are specified in NORSOK T-100. Subsystem 86-00 86-11 86-12 86-21 86-22 86-23 86-24 86-31 86-35 86-36 86-37 86-39 86-41 86-42 86-43 86-45 86-51 86-52 86-53 86-54 86-55 86-61 86-62 86-63 86-70 86-71 86-72 86-73 86-81 86-82 86-83 86-84Title General Public address and general alarm (PAGA) Driller’s intercom Telephone system (PABX) Multiplexer Office data network equipment Office data and telephone cabling network Radio links Satellite links Wireless broadband access network Vessel network (coastal VHF and mobile telephone base stations) Fibre optic cable links General radio UHF radio and paging Audio and video entertainment Personnel tracking Closed circuit television (CCTV) Meteorological observation Marine radar and automatic identification system (AIS) Aviation radar Communication recorder Shuttle tanker loading telemetry Work over telemetry Pipeline telemetry Navigational aids Distance measuring instrument ATIS/AFTN for aviation Positioning Main distribution frame Telecom power supply Real time clock (RTC) Telecommunication management systemRevision status Edition 4 of February 2010 Edition 4 of February 2010 Edition 4 of February 2010Edition 4 of February 2010Edition 4 of February 2010 Edition 4 of February 2010 Edition 4 of February 2010 Edition 4 of February 2010 Edition 4 of February 2010 Edition 4 of February 2010Edition 4 of February Edition 4 of February Edition 4 of February Edition 4 of February2010 2010 2010 2010NOTE The telecommunication subsystems given subsystem number, but no revision status, are normally specified by Company.Normative and informative referencesThe following standards include provisions and guidelines which, through reference in this text, constitute provisions and guidelines of this NORSOK standard. Latest issue of the references shall be used unless otherwise agreed. Other recognized standards may be used provided it can be shown that they meet the requirements of the referenced standards.NORSOK standardPage 5 of 360 2 4 0 4 1 0 2 s a g r a V + r a c s O r o f S A e n i l n O d r a d n a t S y b d e d i v o r PNORSOK standard T-0012.1Normative referencesCENELEC CLC/TR 50427, FOR 2004-02-16 nr 401, FOR 2005-03-04 nr 200, IEC 61000, LOV-2003-07-04-83, NEK TS 606, NORSOK E-001, NORSOK M-501, NORSOK S-001, NORSOK T-100,2.2Edition 4, February 2010Assessment of inadvertent ignition of flammable atmospheres by radiofrequency – Guide Forskrift om elektronisk kommunikasjonsnett og elektronisk kommunikasjonstjenest (“ekomforskriften”) (in Norwegian) Forskrift om autorisasjon for installatør av elektronisk kommunikasjonsnett og radioutstyr (“autorisasjonsforskriften”) (in Norwegian) Electromagnetical campatibility (EMC) – several parts ”Lov om elektronisk kommunikasjon (ekomloven)”, including applicable regulations (in Norwegian) Cables for offshore installations halogen-free and/or mud resistant Technical specification Electrical systems Surface preparation and protective coating Technical safety Telecom subsystemsInformative referencesNone.Terms, definitions and abbreviationsFor the purposes of this NORSOK standard the following terms, definitions and abbreviations apply.3.1Terms and definitions3.1.1 Company contractual responsible company 3.1.2 can verbal form used for statements of possibility and capability, whether material, physical or casual. 3.1.3 may verbal form used to indicate a course of action permissible within the limits of this NORSOK standard 3.1.4 shall verbal form used to indicate requirements strictly to be followed in order to conform to this NORSOK standard and from which no deviation is permitted, unless accepted by all involved parties 3.1.5 should verbal form used to indicate that among several possibilities one is recommended as particularly suitable, without mentioning or excluding others, or that a certain course of action is preferred but not necessarily required3.2AbbreviationsAC AFTN AIS AISI ATEX ATIS APS CCR CCTV CENELEC DCalternating current aeronautical fixed telecommunications network automatic identification system American Iron Steel Institute atmosphères explosibles (French) automatic terminal information service abandon platform shut down central control room closed circuit television European Committee for Electrotechnical Standardisation direct currentNORSOK standardPage 6 of 360 2 4 0 4 1 0 2 s a g r a V + r a c s O r o f S A e n i l n O d r a d n a t S y b d e d i v o r PNORSOK standard T-001 DARPS DME ECC Ex GPS IE IEC IP IS LAN MDF NEK PAGA PABX PE RTC SPL STP TMS TS UHF UTP VHF VRMS WANEdition 4, February 2010differential absolute and relative positioning sensor distance measuring equipment emergency control centre explosion proof global positioning system instrument earth International Electrotechnical Commision degree of protection of enclosures intrinsically safe local area network main distribution frame Norsk Elektroteknisk Komité public address and general alarm private automatic branch exchange protective earth real time clock sound pressure level shielded twisted pair telecommunication management system technical standard ultra high frequency unshielded twisted pair very high frequency volt root mean square wide area networkRequirements for telecommunication systems4.1GeneralThe telecommunication systems shall provide facilities to support safe and efficient operation. This includes systems for • • •internal communication onboard the installation, external communication with onshore operational centre, and other installations, communication for marine and air activities.During a hazardous or emergency situation it is essential that those telecommunication systems required remain active, and that they are designed not to create additional hazards.4.2 4.2.1Telecommunication subsystems Public address and general alarm (PAGA)A PAGA system according to specifications in NORSOK T-100 shall be installed. The system shall distribute audio alarms, visual alarms and emergency messages, and shall be interfaced to the fire and gas system for alarm input. The PAGA system shall also be used for general announcements. No single failure in equipment or cables, nor any single external event, shall cause significant reduction of PAGA sound level in any area. Function parameters and data for loudspeakers and flashing lights shall be measured and provided as stated in Annex A. 4.2.2Driller’s intercomOn installations with drilling facilities a driller’s intercom function according to specifications in NORSOK T100 shall be installed. The function may be provided either by a drilling intercom system or by a UHF radio system.NORSOK standardPage 7 of 360 2 4 0 4 1 0 2 s a g r a V + r a c s O r o f S A e n i l n O d r a d n a t S y b d e d i v o r PNORSOK standard T-001 4.2.3Edition 4, February 2010Telephone systemA telephone system according to Company requirements shall be installed. The system shall provide internal and external switched telephone services including emergency communication. The system shall include Ex telephones as well as office type telephones, and have interface to other systems as specified in NORSOK T100. The system shall be integrated as a part of the Company telephone/voice communication network, but shall be able to operate locally on the installation independent of the Company network. Function parameters and data for Ex telephones shall provided as stated in Annex A. NOTE The term PABX is used for the central part of the telephone communication system, although several technologies may be used.4.2.4Data networkA data network shall be installed to link personal computers/workstations, servers, network connected equipment etc. The data network may be separated in several networks (e.g. office data network, technical network etc.) and shall be integrated as a part of the Company LAN/WAN infrastructure, according to Company requirements. The data network includes • •office data and telephone network cabling according to specifications in NORSOK T-100, network equipment (e.g. switches, routers, firewalls etc.) according to Company requirements for LAN/WAN, wireless network equipment for wireless local area network (if applicable) according to Company requirements.4.2.5UHF radio and paging systemA UHF radio system according to specifications in NORSOK T-100 shall be installed. The system shall provide internal radio communication between fixed locations and hand portable radios. The UHF radio system shall have dual frequency (“duplex”) talk through channels and single frequency (“simplex”) channels. Access from fixed locations shall be via fixed operator control units or radios. In addition, access via the PABX can be used. The system shall handle emergency communication and shall be designed with high availability. The paging system should be interfaced to and utilize the same antenna combiner and antenna system as the UHF radio system. 4.2.6Mandatory and general radio systemA general radio system according to specifications in NORSOK T-100 shall be installed. This includes mandatory systems for maritime and aeronautical communication. Additional equipment shall be included to achieve an efficient and reliable operational radio communication to ships, helicopters, and other platforms. This includes radios in ECC, helitower, cranes and dedicated offices. 4.2.7Main communication to shore/other platformsAs a minimum two independent permanent communication links to the onshore operation centre shall be provided, either directly or via other installations. The communication links shall be designed for high reliability and high capacity to allow for emergency communication, daily operation and integrated operations. Applicable systems are • • •fibre optical cable according to Company requirements, radio link according to Company requirements, satellite link according to Company requirements.NORSOK standardPage 8 of 360 2 4 0 4 1 0 2 s a g r a V + r a c s O r o f S A e n i l n O d r a d n a t S y b d e d i v o r PNORSOK standard T-001Edition 4, February 2010To enable effective and flexible usage of available bandwidth, a multiplexer system according to Company requirements may be installed. The established Company network synchronization plan shall be followed. In addition to the permanent communication links, switched satellite services may be used for backup. If a fibre cable system is installed, the fibre cable system should be • •integrated with existing fibre cable systems in the area (if any), prepared for future extension of the fibre cable system, preferably by a blind subsea tail.4.2.8Telemetry and remote control systemsTelemetry systems shall be installed, if required, for relaying of remote control signals to ensure safe operations in case of malfunctions, like shut down in conjunction with pipelines, offshore loading, well maintenance rigs etc. Telemetry systems shall utilise fail safe signal transmission systems according to Company requirements. The telemetry and voice communication system for shuttle tankers shall be according to the standard used by the actual shuttle tanker fleet. 4.2.9Vessel network and wireless broadband access networkIn areas where ships have limited communication facilities to the onshore public network, local installation of coastal VHF and/or mobile telephone base stations connected to the onshore public network, should be installed. A wireless broadband access network m ay be installed. If installed, the implementation shall be coordinated with other wireless broadband access networks in the area (if any). 4.2.10Closed circuit television (CCTV)A CCTV system according to specifications in NORSOK T-100 shall be installed. The system shall be used for surveillance of selected areas and operations. 4.2.11Audio and video entertainmentAn entertainment system according to specifications in NORSOK T-100 shall be installed on manned installations. The system shall distribute live broadcast as well as recorded audio/video to relevant areas such as cabins, offices, workshops and public areas in the living quarter. Interactive services according to Company requirements may be included. 4.2.12Marine radar and automatic identification system (AIS)The area around the platform shall be covered by maritime surveillance radar and AIS according to specifications in NORSOK T-100. The radar and AIS equipment may be installed on neighbouring platforms. 4.2.13Meteorological observationA system for meteorological observation according to specifications in NORSOK T-100 shall be installed. The system shall provide information on current weather and sea conditions for both helicopter and maritime traffic as well as for operational needs. 4.2.14Real time clockA real time clock according to specifications in NORSOK T-100 shall be installed if required for uniform timekeeping and for clocking of the telecommunication network system. 4.2.15Telecommunication management system (TMS)A TMS according to specifications in NORSOK T-100 shall be installed. T he system may be locally installed on the platform or integrated as part of the Company TMS according to Company requirements. Major alarms shall be presented in the CCR. For installation with normally no telecommunication specialists on board, facilities for remote diagnostics shall be available.NORSOK standardPage 9 of 360 2 4 0 4 1 0 2 s a g r a V + r a c s O r o f S A e n i l n O d r a d n a t S y b d e d i v o r PNORSOK standard T-001Edition 4, February 2010All telecommunication subsystems shall have alarm outputs via a standard interface, compatible with the TMS. 4.2.16Main distribution frame/distribution framesDistribution frames according to specifications in NORSOK T-100 shall be used for cross connection of signal wires between central equipment and field equipment. 4.2.17Navigation and positioningNon directional beacon according to specifications in NORSOK T-100 shall be installed for helicopter traffic. DME may be required for helicopter traffic. NOTE DME on one installation will normally cover the installation within a geographical area.Short range/relative positioning system(s) (e.g. DARPS, Artemis, RADius) according to Company requirements shall be installed. Absolute/global positioning system(s) (e.g. GPS) according to Company requirements shall be installed on floating installations. GPS for positioning should be combined with GPS for RTC. 4.2.18Personnel tracking systemA personnel tracking system according to Company requirements may be installed. 4.2.19Environmental surveillanceAn environmental surveillance system according to Company requirements may be installed. The system may interface to or be integrated with the radar and/or the meteorological observation system. 4.2.20Voice and closed circuit television (CCTV) recordingSystems for recording of emergency voice communication, CCTV etc. according to Company requirements may be installed.System design5.1Emergency communication5.1.1Functional requirementsThere shall be facilities which enable • •persons in charge during a hazardous or emergency situation to alert all personnel and give instructions, persons in charge of safety related actions, work teams, and persons trapped by the incident to communicate with each other and with the ECC, the ECC to communicate with onshore emergency control centre, nearby offshore installations, helicopters, ships and locations on the platform.5.1.2Emergency communication systemsDuring a hazardous or emergency situation, the following telecommunication systems shall be available and in operation according to NORSOK S-001: PAGA; UHF radio; PABX; mandatory and general radio; communication to shore and other installations.• • • • •These systems shall be designed and installed with high degree of protection against influence from external events (e.g. fires, gas and fluid leaks, explosions, power failure etc.) as well as failures in the equipment, to ensure continuous operations. To achieve this, the following requirements shall apply: NORSOK standardPage 10 of 360 2 4 0 4 1 0 2 s a g r a V + r a c s O r o f S A e n i l n O d r a d n a t S y b d e d i v o r PNORSOK standard T-001• •Edition 4, February 2010the central equipment shall be located to the telecommunication equipment room or rooms with equivalent functionality in the safest area on the installation; the systems shall operate independently in critical situations; the systems shall have a modular design for high reliability as specified in NORSOK T-100.5.1.3Support systemsThe following systems shall be designed to be in operation during a hazardous or emergency situation to support personnel in charge: the part of the data network that will be used by the personnel in charge; CCTV; radar and AIS (if installed); wind observations as part of the meteorological observation system; personnel tracking system (if installed); voice and CCTV recording (if installed).• • • • • •5.1.4Muster stationsAt least two different communication facilities shall be available at the muster stations. The main facilities shall be hand portable radios and telephones. Required telecommunication units at the muster station where the APS switch is located: • •telephone (Ex); PAGA microphone station (Ex).5.1.5Uninterruptable power supply requirementsEmergency communication systems shall be DC powered from the telecommunication battery supply. Systems not made for DC-powering shall be powered from the platform uninterruptible power supply system. All the support systems designed to be in operation during a hazardous or emergency situation should be powered from the platform uninterruptible power supply system.5.2 5.2.1Telecommunication equipment location GeneralEquipment room(s), rectifier room and battery room, if needed, shall not have suspended ceilings. 5.2.2Telecommunication equipment roomA dedicated telecommunication equipment room shall accommodate most of the telecommunication central equipment as follows: •• • •• •the telecommunication equipment room(s) with the central equipment and batteries shall be located in the safest area on the installation; the room(s) shall be provided with isolation facilities. If gas is detected in the air intake to a room, the room shall be isolated to prevent gas from entering the room; there shall not be any piping for liquids going through the equipment room(s); risk for fire in the room(s) shall be minimized; doors to the telecommunication equipment room(s) shall be equipped with a lock to lock the room(s) for unauthorized personnel; doors on the equipment racks shall not be locked by key; racks for telecommunication equipment should be located for front and rear access. Location along a wall shall only be allowed if racks and equipment is designed for front access only.A secondary equipment room should be used for the PAGA B-system.NORSOK standardPage 11 of 360 2 4 0 4 1 0 2 s a g r a V + r a c s O r o f S A e n i l n O d r a d n a t S y b d e d i v o r PNORSOK standard T-001 5.2.3Edition 4, February 2010Telecommunication workshopA workshop suitable for handling sensitive equipment and instruments shall be established near the main telecommunication equipment room. The telecommunication workshop may be combined with other suitable workshops for electronic equipment. 5.2.4Battery systems/banks for telecommunicationTo keep the voltage drop on the low voltage supply lines as low as possible, the batteries for the telecommunication DC power supply shall be located near the telecommunication equipment. Rectifiers and shutdown facilities shall be included. Distribution panels shall be installed in the related equipment rooms. 5.2.5Transmitter roomHigh power radio transmitters, radar transmitters or other equipment requiring short antenna cables should be located in a separate equipment room near the antennas (antenna tower). Radio frequency equipment may also be installed in Ex certified out-door units to minimize feeder loss. 5.2.6Antenna tower and antennasAn antenna tower shall be installed on top of the installation for antennas for VHF and UHF mobile radio systems, radio links, radar, etc. The tower shall be of sufficient height to obtain necessary vertical separation between antennas and to avoid obstruction from other modules or crane activities. Antennas shall be located to obtain • • • • •optimum radio frequency reception/transmission, minimum exposure to damage from heat generated by mud burners, exhaust or flare booms, protection from damage by operational activities, i.e. cranes, minimum radio interference between different antennas, personnel safety.The antennas shall, as far as possible regarding coverage, be mounted in safe area. The antenna tower shall be used as the primary location of antennas. Satellite antennas, if used, shall be located with an unobstructed view towards the actual satellite positions. Redundant antennas for emergency communication systems shall be separated from the main antennas to avoid simultaneous obstruction or mechanical damage resulting in a total loss of communication. 5.2.7HelitowerThe helitower shall have equipment for communication with helicopters, ships, CCR and the ECC. The room shall be equipped with • •fixed and hand portable radios for aeronautical and maritime VHF radio, access to meteorological observation data (terminal or display).5.2.8ReceptionThe reception function shall in addition to installations for normal offices have a PAGA access unit installed. 5.2.9Central control room (CCR)The CCR operator shall be able to communicate with personnel anywhere on the installation, ships, other installations in the area, and to shore. The following systems shall be available in the CCR: • • • • •mandatory radio (global maritime distress and safety system) and additional maritime VHF radio; PAGA access unit; UHF radios and/or control units; telephones, ordinary and with priority access and hot-line functions; CCTV control unit and monitors;NORSOK standardPage 12 of 360 2 4 0 4 1 0 2 s a g r a V + r a c s O r o f S A e n i l n O d r a d n a t S y b d e d i v o r PNORSOK standard T-001 • • •Edition 4, February 2010radar display (if applicable); access to the meteorological observation system (terminal or display); aeronautical VHF.5.2.10Emergency control functionCommunication equipment for use during a hazardous or emergency situation shall be available. The ECC communication functions should be combined with the CCR communication equipment, where possible. Important functions for emergency control located elsewhere shall have the required communication facilities available, i.e. dispatcher’s office/reception for handling personnel evacuation. 5.2.11Mandatory radio equipmentThe operational units for mandatory radio equipment should be located according to the operational organisation, i.e. in the CCR. Equipment for the required backup can be located to the helitower or the reception according to what is practical for operation. 5.2.12Drilling control roomIn the drilling control room there shall be facilities for communication with drilling related locations and the CCR. The room shall have • • • •PAGA access unit, fixed UHF radios, driller’s intercom function, CCTV control unit and monitor.5.2.13CranesThe crane operators shall be able to communicate with the CCR, ships and operators on deck. Maritime VHF, UHF radio, PAGA loudspeakers and telephone shall be located in the cranes.5.3 5.3.1Ignition source control for telecommunication systems GeneralTelecommunication systems required to remain active in an emergency situation shall not create additional hazards. The emergency communication systems shall be in accordance with requirements for ignition source control, i.e. only equipment subject to special considerations or Ex-certified communication equipment, shall be in operation in situations where a flammable gas mixture can be present according to NORSOK S-001. 5.3.2Ex protectionWith the following additions, all methods of Ex protection may be used: • • •Ex n equipment may be used in zone 2 according to Company approval; Ex d equipment should be provided with an Ex e cable entry; Ex p equipment may be used according to Company approval.5.3.3Field equipmentNon-Ex-certified field equipment shall be shut down by the area shut down commands according to the installations shut-down philosophy. In all areas, sufficient Ex-certified communication equipment shall be in operation during a hazardous or emergency situation. Telecommunication equipment installed in non-hazardous naturally ventilated areas shall as a minimum be suitable for operation in Zone 2. All loudspeakers and flashing lights shall comply with ATEX requirements for Zone 1 or Zone 2.NORSOK standardPage 13 of 360 2 4 0 4 1 0 2 s a g r a V + r a c s O r o f S A e n i l n O d r a d n a t S y b d e d i v o r PNORSOK standard T-001Edition 4, February 2010Zone 1 loudspeakers and flashing lights shall be used in Zone 1, Zone 2 and non-hazardous naturally ventilated areas. Zone 2 loudspeakers and flashing lights may be used in non-hazardous mechanically ventilated areas. 5.3.4Central equipmentThe central equipment that shall be kept operational in a hazardous or emergency situation shall only be shut down after operation of an APS switch or by hazardous conditions in the actual equipment room. The APS shut down action shall be delayed by 30 min. It shall be possible to manually reset the timer circuit. 5.3.5AntennasEx-certified antennas according to area classification shall be used in classified areas. Antennas (active and passive) installed in non-hazardous areas shall be considered as field equipment. Passive antennas may be subject to special considerations as an alternative to Ex-certification and shall as such not be disconnected if gas is detected in the area. Radio frequency radiation from antennas shall be in compliance with the recommendations in CENELEC CLC/TR 50427.5.4 5.4.1Common requirements for system design Equipment standardisationField equipment, telecommunication outlets etc. shall be standardised on the installation independent of contractor for the different modules. Different models of equipment to serve different functional requirements may be used, but equipment according to the same functional requirement shall be standardised (manufacturer and model). 5.4.2Radio frequency analysisThe combination of radio frequencies used shall not cause disturbing interference. A frequency interference analysis for the installation including the relevant frequencies in that area shall be used as basis for the selection and implementation of radio frequencies. 5.4.3Antennas and antenna cablesAntennas shall be of a design suitable for the environmental conditions on the Norwegian continental shelf. Antenna cables shall be of a design protected from water intrusion. For coaxial cables should antenna connectors be of N type. Antenna cables should be 50 ohm low loss coaxial. There shall be a protected cable route between the antenna tower and the telecommunication equipment room. The route should be optimised to have no sharp bends and be as short and direct as possible. 5.4.4Degree of protection (IP code)Minimum degree of protection provided by enclosure shall be as follows: •Outdoor, in naturally ventilated and wash down areas: – General – PAGA loudspeakers – PAGA flashing lights Indoor dry areas: – General – PAGA loudspeakers – PAGA flashing lights Other areas: – General – PAGA loudspeakers – PAGA flashing lightsNORSOK standardIP 56 IP 66 IP 66 IP 20 IP 56 IP 56 IP 44 IP 66 IP 66 Page 14 of 360 2 4 0 4 1 0 2 s a g r a V + r a c s O r o f S A e n i l n O d r a d n a t S y b d e d i v o r PNORSOK standard T-001 5.4.5Edition 4, February 2010Electromagnetic compatibility (EMC)All equipment and installations shall comply with IEC 61000 regarding EMC r equirements with respect to emission and immunity. 5.4.6Spare capacitySpare capacity and space shall be included in all parts of the telecommunication system to enable “easy to implement” and cost effective modifications and expansions being relevant in the operation period. The telecommunication equipment room(s) including transmitter room, battery room(s) etc. shall have 25 % spare floor capacity for installation of new cabinets etc. at the end of the project, i.e. at handover to Company for operation. Cabinets, distribution frames, junction boxes, cable trays, cables, antenna tower etc. shall have 25 % spare capacity for installation of additional equipment at the end of the project, i.e. at handover to Company for operation. 5.4.7Requirements for temporary use of telecommunication systemsRequirements for temporary use of telecommunication systems during the construction and hook-up phases shall be met, i.e. temporary use of the telephone system, PAGA, data network and radio communication.Telecommunication cable requirementsThe following cable types shall be used: • •telecommunication cables according to NEK TS 606 (“S” type cables); optical fibre cables according to NEK TS 606 (“F” type cables).In addition there will be requirements for special cable types not specified in NEK TS 606: • • • •radio frequency cables, e.g. coaxial cables, leaky feeders, waveguides etc.; UTP/STP for “Office data and telephone cabling network” as specified in NORSOK T-100; special purpose made cables may be used according to Company approval; cross connect wires/fibres etc.All cables and cross connect wires/fibres shall confirm with requirements in NEK TS 606 regarding flame retardance, content of halogen and smoke emission. All cables shall confirm with requirements in NEK TS 606 regarding sheath marking and other applicable requirements. Fire resistant telecommunication cables and optical fibre cables according to NEK TS 606 shall be used for emergency communication systems. NOTE Not applicable for special cable types listed above.Mud resistant cables shall be used where cables are routed into or through areas exposed to mud/oil. The cable sheath colour for cables used in intrinsically safe circuits shall be grey, but each cable shall be clearly marked (e.g. with blue heat shrink) at both ends for functional identification. These cables shall also be marked on both sides of multi cable transits. Multicore telecommunication cables with collective screen should be used, see below: • •telecommunication cables (except indoor cables) should be 1, 2, 4, 8, 16 or 24 pairs 0,75 mm² + screen; indoor telecommunication cables (type S9 or equivalent) should be 4, 10, 20, 30 or 50 pairs 0,5 mm diameter + screen.Individual screens shall only be used when this is required for the technical performance.NORSOK standardPage 15 of 360 2 4 0 4 1 0 2 s a g r a V + r a c s O r o f S A e n i l n O d r a d n a t S y b d e d i v o r PNORSOK standard T-001Telecommunication installation7.1GeneralEdition 4, February 2010Telecommunication installation shall confirm with requirements in LOV 2003-07-04 nr 83 (“ekomloven”), FOR 2004-02-16 nr 401 (“ekomforskriften”) and FOR 2005-03-04 nr 200 (“autorisasjonsforskriften”), where applicable.7.2 7.2.1Equipment location GeneralEquipment should be located and installed according to the following requirements: • • • • • •protection against damage; protection against vibration; protection against weather and water jets; to prevent the equipment from falling down; good operability and serviceability; accessibility for maintenance without scaffolding, ladder, etc.Equipment like PAGA flashing lights, loudspeakers, splitters and tap-offs may be located on the support for cable ladders and trays or cable ladder’s side rail. 7.2.2Field equipment locations7.2.2.1Public address and alarm systemPublic address and alarm system equipment should be located above deck/floor level as follows: • •loudspeakers: 2 m to 3 m; PAGA flashing lights: maximum 3 m.Loudspeakers shall not be located behind obstructions that will hinder sound distribution. If loudspeakers are mounted in ceilings, recessed installation should be used. Except for ceiling mounted loudspeakers, loudspeakers shall be installed to allow for future adjustments as follows: • •at the horizontal plane: 90 degrees; downwards: 60 degrees from the vertical plane.7.2.2.2Telephone system (PABX)Telephone system equipment shall be located above deck/floor level as follows: • • •flashing lights, maximum 3 m; telephones (Ex) approximately 1,4 m; accoustic hoods approximately 2 m to the inside top of the hood.7.2.2.3Closed circuit television (CCTV) equipmentTo prevent vibrations, camera brackets shall be made sufficiently rigid to provide appropriate stability in all directions. 7.2.2.4Wind sensorsWind sensors shall be installed to minimize the influence from the platform construction regarding turbulence. 7.2.2.5Junction boxes and telecommunication utility standsJunction boxes shall be located between 1,2 m and 1,6 m above deck/floor level.NORSOK standardPage 16 of 360 2 4 0 4 1 0 2 s a g r a V + r a c s O r o f S A e n i l n O d r a d n a t S y b d e d i v o r PNORSOK standard T-0017.3 7.3.1Edition 4, February 2010Telecommunication cable installation requirements Installation of fibre optical cablesSpecial requirements apply to installation of fibre optical cables in addition to or in stead of the general cable installation requirements in this NORSOK standard. Fibre optical cables shall be installed in accordance with manufacturer specifications/guidelines. Focus shall be put on bending radius, strapping and mechanical load/strain. Termination and splicing of fibre optical cables shall be performed by specially trained personnel with the required competence. Fusion welding should be used for splicing operations. Fibre optical cables shall be tested and documented by the use of suitable test equipment. 7.3.2Installation of radio frequency cablesSpecial requirements apply to installation of radio frequency cables in addition to or in stead of the general cable installation requirements in this NORSOK standard. Radio frequency cables shall be installed in accordance with manufacturer specifications/guidelines. Focus shall be put on bending radius, strapping/mounting clamps and mechanical load/strain. Protection shields shall be used whenever necessary to protect the cables from mechanical damage. All connection work shall be performed by specially trained personnel with the required competence. Leaky feeders should be installed maximum 4,0 m above the floor. Radio frequency cables shall be tested and documented by the use of suitable test equipment. 7.3.3Installation of unshielded-/shielded twisted pair (UTP/STP) cablesSpecial requirements apply to installation of UTP/STP cables in addition to or in stead of the general cable installation requirements in this standard. UTP/STP cables shall be installed in accordance with manufacturer specifications/guidelines. Focus shall be put on bending radius, strapping and mechanical load/strain. All connection work shall be performed by specially trained personnel with the required competence. Each termination point (outlet) shall be tested and documented by the use of suitable test equipment.7.4 7.4.1General cable installation requirements GeneralReference is made to NORSOK E-001 for general cable installation requirements, with requirements that are applicable to telecommunication cables. 7.4.2Cable segregationSee NORSOK E-001, 9.2.2. Additional requirements: DC/AC cables for telecommunication 24 V or 48 V should be routed on system 3 cable trays. 7.4.3Cable routingSee NORSOK E-001, 9.2.3. 7.4.4Cable installationSee NORSOK E-001, 9.2.4. 7.4.5Cable cleating and strappingSee NORSOK E-001, 9.2.5.NORSOK standardPage 17 of 360 2 4 0 4 1 0 2 s a g r a V + r a c s O r o f S A e n i l n O d r a d n a t S y b d e d i v o r PNORSOK standard T-001 7.4.6Edition 4, February 2010Temporary cablesSee NORSOK E-001, 9.2.6. 7.4.7Cable gland selectionSee NORSOK E-001, 9.2.7. Additional requirements: Glands shall have metric (1,5 mm) threads. Items with threaded entries other than metric should be fitted with adaptors/reducers giving the correct entry for metric glands. For direct cable entry into Ex d enclosures, compound type cable glands shall be used. 7.4.8Cable terminationSee NORSOK E-001, 9.2.8. 7.4.9Spare conductorsSee NORSOK E-001, 9.2.9. 7.4.10Support system (cable ladders and trays)See NORSOK E-001, 9.2.10.7.5 7.5.1Equipment earthing and bonding GeneralSee NORSOK E-001, 9.1.1. 7.5.2Earthing of exposed conductive partsSee NORSOK E-001, 9.1.2. 7.5.3Equipotential bondingSee NORSOK E-001, 9.1.3. Additional requirements: Separate bonding shall be applied only for equipment which is isolated from main structure. 7.5.4Telecommunication earth (i.e. instrument earth)See NORSOK E-001, 9.1.4. 7.5.5Earth bar and earth bossSee NORSOK E-001, 9.1.5. Additional requirements: Special focus shall be made on radio frequency cabling, radio transmitters and antenna tuning units to ensure a stable earth connection.7.6 7.6.1Marking and labelling GeneralSee NORSOK E-001, 9.12.1. 7.6.2Cable laddersSee NORSOK E-001, 9.12.2. 7.6.3EquipmentSee NORSOK E-001, 9.12.3. Additional requirements: NORSOK standardPage 18 of 360 2 4 0 4 1 0 2 s a g r a V + r a c s O r o f S A e n i l n O d r a d n a t S y b d e d i v o r PNORSOK standard T-001Edition 4, February 2010Telephones shall be marked with emergency call number and other important telephone numbers. Data/telecommunication outlet tag labels shall be fixed to the outlets, and label size must be adapted to the space available. 7.6.4CablesSee NORSOK E-001, 9.12.4. 7.6.5Identification of bus bars, conductors and wiresSee NORSOK E-001, 9.12.5. Additional requirements: • •Telecommunication cable pairs shall generally be identified by pair numbers. 2 For telecommunication cables type S9 (0,5 mm ) connected to knife type blocks (insulation displacement connection) pair marking will not be required, and the colour coding of the cable pairs will be sufficient. Marking of cross connection conductors is not required.7.6.6Colour coding of earth conductors, earth bars and cable screens7.6.6.1Protective earth (PE)See NORSOK E-001, 9.12.6.1. 7.6.6.2Instrument earth (IE)The IE screen shall be covered with sleeves coloured yellow/green: •• •IE bars shall be marked yellow/green and with a red mark for bars which are containing non-IS cables only; a blue mark for bars containing only IS cables; both red and blue marks for bars containing non-IS and IS cables.7.6.6.3BondingSee NORSOK E-001, 9.12.6.2.7.7 7.7.1Bulk materials Equipment materialsAll equipment and materials shall as a minimum be flame retardant with low halogen content. Equipment enclosures located outdoor, in naturally ventilated areas and wash down areas shall be made of proven sea water resistant material or protected by a coating system according to NORSOK M-501. Panels shall be made of metal except Ex d or Ex e distribution boards, where glass fibre reinforced polyester (GRP) enclosures are acceptable. 7.7.2Junction boxesSee NORSOK E-001, 9.13.1. Additional requirements: •• •Junction boxes located outdoor, in naturally ventilated and in wash down areas shall be made of stainless steel AISI 316. Junction boxes made from impact resistant, flame retardant cast resin may be used when located in dry areas. Junction boxes shall be standardized to Ex e types. Vertically mounted terminal rail(s) shall be installed minimum 120 mm above the cable entry into multicore boxes.NORSOK standardPage 19 of 360 2 4 0 4 1 0 2 s a g r a V + r a c s O r o f S A e n i l n O d r a d n a t S y b d e d i v o r PNORSOK standard T-001 •• •Edition 4, February 2010Distance between terminal rail and side wall shall be minimum 80 mm for easy cable termination and core identification. Distance between parallel terminal rows shall be minimum 80 mm. Junction boxes greater than 300 mm x 250 mm (width x height), or junction boxes located in inaccessible areas (e.g. derrick), shall have hinged doors. Junction box mounting flanges shall be bending outwards.7.7.3Equipment brackets and supportsSee NORSOK E-001, 9.13.5. 7.7.4Fixing materialsSee NORSOK E-001, 9.13.8. Additional requirements: • •Lock washers or equivalent shall be used on all fixings to prevent loosening by vibration. Special lock nuts and shock absorbers shall be used where heavy and/or constant vibration may occur.0 2 4 0 4 1 0 2 s a g r a V + r a c s O r o f S A e n i l n O d r a d n a t S y b d e d i v o r P NORSOK standardPage 20 of 36NORSOK standard T-001Edition 4, February 2010Annex A (Normative) Data sheets for field equipmentData sheets: 1. 2. 3. 4.Telephone (Ex and office) Loudspeakers (Ex loudspeakers indoor/outdoor, living quarter and offices) Outdoor telephone hood Flashing lights (PAGA and telephone flashing lights)0 2 4 0 4 1 0 2 s a g r a V + r a c s O r o f S A e n i l n O d r a d n a t S y b d e d i v o r P NORSOK standardPage 21 of 36NORSOK standard T-001Edition 4, February 2010Made byNORSOK T-001 Rev. 3, Dec. 2003 Package no.TELECOMMUNICATION TELEPHONE DATA SHEETChecked by Date Data sheetDoc. no.Rev.TDS-T01 Page 1 of 13 DESCRIPTION: EEx telephones for both indoor and outdoor use. Note: Values in brackets under requirements are recommendation/examples.GENERAL:REQUIREMENTSUNITMANUFACTURER DATAGAS GROUP AND TEMP.CLASS: ZONE CERTIFICATION: DEGREE OF PROTECTION:Zone 1 IP 56MATERIAL: COLOUR: MOUNTING: TERMINATION ENCLOSURE CERT.:EEx eCABLE GLAND ENTRY:(M20)DIMENSION: WEIGHT: MANUFACTURER: MODEL:0 2 4 0 4 1 0 2 s a g r a V + r a c s O r o f S A e n i l n O d r a d n a t S y b d e d i v o r PP.O. NUMBER: SUPPLIER’S DRAWING/DOCUMENT: EQUIPMENT CHARACTERISTICS:EARTHING: CALL SIGNAL TYPE: DIAL TYPE:(Shrill warble tone) (Keypad)SIGNAL TYPE:(DTMF or decadic)RECALL :Controlled breakON-HOOK: VOLTAGE:(to 48)VDCCURRENT:(22)µA(to 48) (min. 20)VDC mA(40)VACOFF-HOOK: VOLTAGE: CURRENT: MIN. RINGING VOLTAGE DETECTION: RINGING FREQUENCY: RINGING SIGNAL SPL ( at 1m): HANDSET CORD/LENGTH:(2 to 2,8) (8Hz sweep rate)kHz(78)dBA(Coiled cord, 1m)CONNECTION : OPERATION TEMP.:-10 to +40°CHUMIDITY: INTERFACE: FLASHLIGHT TRIGGING: GALVANIC SEPARATION: TRIGG LEVEL OUTPUT:NORSOK standard(Optocoupler) Yes/NoPage 22 of 36NORSOK standard T-001Edition 4, February 2010Made byNORSOK T-001 Rev. 3, Dec. 2003 Package no.TELECOMMUNICATION LOUDSPEAKER DATA SHEETChecked by Date Data sheetDoc. no.Rev.TDS-T02 Page 1 of 13 DESCRIPTION: Loudspeaker for use in the PAGA system. EEx for indoor or outdoor use. Note *: See the overleaf page for instruction to fill in the datasheet. Note: Values in brackets und er requirements are examples.GENERAL:REQUIREMENTSUNITMANUFACTURER DATAGAS GROUP AND TEMP.CLASS: ZONE CERTIFICATION:Zone 1 or 2DEGREE OF PROTECTION: Outdoor IndoorIP66 (IP56)MATERIAL: PAINTING: COLOUR: MOUNTING: TERMINATION ENCLOSURE CERT.:(EEx e)CABLE GLAND ENTRY: DIMENSION: WEIGHT:0 2 4 0 4 1 0 2 s a g r a V + r a c s O r o f S A e n i l n O d r a d n a t S y b d e d i v o r PMANUFACTURER: MODEL: P.O. NUMBER: SUPPLIER’S DRAWING/DOCUMENT: EQUIPMENT CHARACTERISTICS: EARTHING: POWER TAPPING: LIVING QUARTER: OFFICES: FIELD:(0,005; 0,01; 0,1; 0,5; 0,7)(0,1; 0,3; 0,5; 0,7)(4,5; 6,0; 12,5; 25,0)SPL & FREQUENCY RANGE * (Attach a SPL curve) DISPERSION * (Attach a polar diagram) : DISTORTION * (Attach a distortion curve) : OVERLOAD TEST * : OPERATION TEMP.:h -10 to +40°CHUMIDITY: INTERFACE: NOMINAL LINE VOLTAGE:NORSOK standard100 Vrms-sinusPage 23 of 36NORSOK standard T-001Edition 4, February 2010INSTRUCTIONS FOR TDS-T02 Sound pressure level (SPL) at different inputs/frequencies: SPL shall be measured on the main beam axis 1 m from the loudspeaker, either in an anechoic chamber or free field. A sinus signal at 100 VRMS shall be applied to the loudspeaker. The SPL values shall be measured for each of the following tappings: • • • •maximum rated power of loudspeaker; ½ “ “ “; ¼ “ “ “; + lowest tapping of loudspeaker (power to be stated).SPL shall be presented on an SPL diagram as a function of frequencies from 125 Hz to 8 000 Hz with a sinus signal. A typical SPL curve is enclosed to the data sheet, see Figure B.1. Dispersion: The polar diagram for the loudspeaker shall be enclosed with the datasheet in order to give information about the directivity of the loudspeaker. The polar diagram shall present the dispersion for the following frequencies: 125 Hz, 250 Hz, 500 Hz, 1 000 Hz, 2 000 Hz, 4 000 Hz and 8 000 Hz. A typical dispersion diagram is enclosed to the data sheet, see Figure B.2a and B.2b. Distortion: Distortion shall be presented over the complete frequency range (125 Hz to 8 000 Hz) when a sinus signal of 100 VRMS is applied to the maximum tapping of the loudspeaker. A typical distortion curve is enclosed to the data sheet, see Figure B.2. Overload test: With a 150 VRMS at 1 000 Hz one octave pink noise signal applied to the maximum power tapping of the loudspeaker, present the elapsed time which the loudspeaker survives if less than 12 h.All above tests/measurements to be done with the loudspeaker line transformer included.NORSOK standardPage 24 of 360 2 4 0 4 1 0 2 s a g r a V + r a c s O r o f S A e n i l n O d r a d n a t S y b d e d i v o r PNORSOK standard T-001Edition 4, February 20100 2 4 0 4 1 0 2 s a g r a V + r a c s O r o f S A e n i l n O d r a d n a t S y b d e d i v o r PFigure A.1 – A typical SPL curveNORSOK standardPage 25 of 36NORSOK standard T-001Edition 4, February 2010Frequency [Hz]Distortion125 250 400 450 500 800 1 000 1 500 2 000 4 000 8 00051,4 % 48,1 % 17,6 % 10,0 % 6,9 % 10,0 % 15,7 % 11,7 % 5,9 % 1,9 % 1,5 %Distortion60,0 %50,0 %40,0 %0 2 4 0 4 1 0 2 s a g r a V + r a c s O r o f S A e n i l n O d r a d n a t S y b d e d i v o r P30,0 %20,0 %10,0 %0,0 % 110100 Frequency, Hz100010000 Series1Figure A.2 – Characteristics for measuring object in Figure A.1.NORSOK standardPage 26 of 36NORSOK standard T-001Edition 4, February 20100 2 4 0 4 1 0 2 s a g r a V + r a c s O r o f S A e n i l n O d r a d n a t S y b d e d i v o r PFigure A.3a – Typical polar diagram for 125 Hz, 250 Hz and 8 000 HzNORSOK standardPage 27 of 36NORSOK standard T-001Edition 4, February 2010Figure A.3b – Typical polar diagram for (500 Hz, 1 000 Hz, 2 000 Hz and 4 000 Hz) Figure A.3 – Typical polar diagramsNORSOK standardPage 28 of 360 2 4 0 4 1 0 2 s a g r a V + r a c s O r o f S A e n i l n O d r a d n a t S y b d e d i v o r PNORSOK standard T-001Edition 4, February 2010 Made byNORSOK T-001 Rev. 3, Dec. 2003 Package no.TELECOMMUNICATION OUTDOOR TELEPHONE HOOD DATA SHEET Doc. no.Checked by Date Data sheet Rev.TDS-T03 Page 1 of 13 DESCRIPTION: Telephone hood for outdoor use in corrosive environment. The sound absorbent material shall be non flammable. Note: Values in brackets under requirements are recommendations/examples.GENERAL:MATERIAL: OUTER CASTING: INNER LINNING: SOUND ABSORBANT: PAINTING: COLOUR: MOUNTING: DIMENSION: WEIGHT:REQUIREMENTSUNITMANUFACTURER DATA(Non-corrosive)(Orange) WallmountedMANUFACTURER: MODEL: P.O. NUMBER: SUPPLIER’S DRAWING/DOCUMENT: EQUIPMENT CHARACTERISTICSMIN. NOISE REDUCTION (0,5 to 5 kHz): SHELF: MINIMUM INNER SPACE: INSTRUMENT FIXING METHOD:NORSOK standard100 2 4 0 4 1 0 2 s a g r a V + r a c s O r o f S A e n i l n O d r a d n a t S y b d e d i v o r PdBYes Height – 0,8 m Width – 0,6 m (Fixing plate)Page 29 of 36NORSOK standard T-001Edition 4, February 2010 Made byNORSOK T-001 Rev. 3, Dec. 2003 Package no.TELECOMMUNICATION FLASHING LIGHT DATA SHEETChecked by Date Data sheetDoc. no.Rev.TDS-T04 Page 1 of 13 DESCRIPTION: Flashing light for PA and Telephone Note: Values in brackets under requirements are recommendation/examples.GENERAL:REQUIREMENTSUNITMANUFACTURER DATAGAS GROUP AND TEMP.CLASS: ZONE CERTIFICATION: DEGREE OF PROTECTION: MATERIAL:Zone 1 IP 66PAINTING: COLOUR: MOUNTING: TERMINATION ENCLOSURE CERT.:EEx eNUMBER OF CABLE ENTRIES: – TELEPHONE: – PA:CABLE GLAND ENTRY: DIMENSION: WEIGHT: MANUFACTURER: MODEL: P.O. NUMBER: SUPPLIER’S DRAWING/DOCUMENT:0 2 4 0 4 1 0 2 s a g r a V + r a c s O r o f S A e n i l n O d r a d n a t S y b d e d i v o r PEQUIPMENT CHARACTERISTICS:EARTHING: FLASHING ENERGY: FLASHING RATE: COLOUR: – TELEPHONE: – PA: VISUAL COVERAGE:>10JouleHzGREEN YELLOW 56665 360 x 180degreehemispherical OPERATION TEMP.: HUMIDITY:-10 to +40°C(40 to 60)VDC(185 to 265)VAC40 (50 to 80)VDC VACINTERFACE:POWER CONSUMPTION: – TELEPHONE: – PA: OPERATION VOLTAGE: TRIGGER VOLTAGE: – PA (AT OPER. VOLT. 230 VAC): – TELEPHONE: TRIGGER CURRENT: – TELEPHONE: – PA: START UP CURRENT: NOMINAL CURRENT: GALVANIC SEPARATIONNORSOK standardYES/NOPage 30 of 36NORSOK standard T-001Edition 4, February 2010Annex B (Informative) Typical installation drawings0 2 4 0 4 1 0 2 s a g r a V + r a c s O r o f S A e n i l n O d r a d n a t S y b d e d i v o r PFigure B.1 – Instrument and telecommunication earthNORSOK standardPage 31 of 36NORSOK standard T-001Edition 4, February 2010Figure B.2 – Electrical, instrument and telecommunication equipment terminationNORSOK standardPage 32 of 360 2 4 0 4 1 0 2 s a g r a V + r a c s O r o f S A e n i l n O d r a d n a t S y b d e d i v o r PNORSOK standard T-001Edition 4, February 20100 2 4 0 4 1 0 2 s a g r a V + r a c s O r o f S A e n i l n O d r a d n a t S y b d e d i v o r PFigure B.3 – Termination in field junction boxesNORSOK standardPage 33 of 36NORSOK standard T-001Edition 4, February 20100 2 4 0 4 1 0 2 s a g r a V + r a c s O r o f S A e n i l n O d r a d n a t S y b d e d i v o r PFigure B.4 – Instrument termination in panelsNORSOK standardPage 34 of 36NORSOK standard T-001Edition 4, February 20100 2 4 0 4 1 0 2 s a g r a V + r a c s O r o f S A e n i l n O d r a d n a t S y b d e d i v o r PFigure B.5 – Splicing of fiber optic cableNORSOK standardPage 35 of 36
· PDF fileThe use of the piping materials according to NORSOK L-001, NORSOK M-601 and this NORSOK standard will result in some deviations from ASME B31.3. NORSOK
Norsok L 001.pdf
Free Download Here
NORSOK STANDARD S-001 Technical safety
http://www.govmin.gl/images/stories/petroleum/norsok/S-001_e4_Technical_Safety.pdf
NORSOK standard S-001 Edition 4, February 2008 NORSOK standard Page 3 of 70 Foreword 6 Introduction 6 1 Scope 7 2Normative and informative references 7
Material data sheets and element data sheets for piping
http://www.norsok-mds-d47.de/pdf/norsok.pdf
The use of the piping materials according to NORSOK L-001, NORSOK M-601 and this NORSOK standard will result in somedeviations from ASME B31.3.
NORSOK STANDARD
http://jadelltd.com/wa_files/Norsok_20-_20Piping_20Standards_20-_20L-003-CR.pdf
NORSOK L-CR-001 Piping and valves 4 DEFINITIONS AND ABBREVIATIONS 4.1 Definitions Normative references Shallmean normative in the application of NORSOK standards.
www.rederi.no
http://www.rederi.no/nrweb/mm.nsf/lupgraphics/AoC%20handbook%20R3%20english%201%20July%202006.doc/$file/AoC%20handbook%20R3%20english%201%20July%202006.docNORSOK: S-001 S-002N, L-001, L-002, P-001, P-100, R-004, , M-001, M-601. ISO: 6385, 13702 No No 302B SeparationEquipment (including water treatment) As in 301B.
Material Data Sheets for the Construction of Piping Systems
http://www.pdhonline.org/courses/m184/Material%20Data%20Sheets%20for%20piping%20M-630.pdf
The use of the piping materials according to NORSOK Standards (L-CR-001, M-630 and M-601) will result in some minordeviations from the ASME B31.3 code.
NORSOK STANDARD M-001
http://davidmuir.com/offshore/ODB/Norwegian_Codes/M-001.pdf
NORSOK standard M-001 Rev. 4, August 2004 NORSOK standard Page 2 of 30 Foreword The NORSOK standards aredeveloped by the Norwegian petroleum industry to ensure …
Det er disse spesifikasjonene som denne diplomoppgaven tar …
http://ndt.esrtechnology.com/noticeboards/mms15/Documents/CPD4DUTProceduresRevised30August2000/CPD4DMeetingMay2000/MelveSTATOIL.doc
1 / 2
http://www.pdfsdocuments2.com/out.php?q=Norsok+L+001
Norsok l 001 pdf
exotica-valves.com
NORSOK standard M-630 Rev. 4, January 2004 NORSOK standard Page 3 of 10 use of this material type is in the NORSOK L-001 Pipe and Valve specification, limited to piping systems with
키워드에 대한 정보 norsok l 001
다음은 Bing에서 norsok l 001 주제에 대한 검색 결과입니다. 필요한 경우 더 읽을 수 있습니다.
이 기사는 인터넷의 다양한 출처에서 편집되었습니다. 이 기사가 유용했기를 바랍니다. 이 기사가 유용하다고 생각되면 공유하십시오. 매우 감사합니다!
사람들이 주제에 대해 자주 검색하는 키워드 LACOSTE L001 TRỞ THÀNH ĐÔI SNEAKERS YÊU THÍCH NHẤT CỦA AD!
- SNKRVN
- SNKRVIETNAM
- SNKRVNTV
- sneakers
- sneakervietnam
- sneakerheads
- Sportswear
- Review giày
- đánh giá sneakers
- Fashion
- Streetwear
- lifestyle
LACOSTE #L001 #TRỞ #THÀNH #ĐÔI #SNEAKERS #YÊU #THÍCH #NHẤT #CỦA #AD!
YouTube에서 norsok l 001 주제의 다른 동영상 보기
주제에 대한 기사를 시청해 주셔서 감사합니다 LACOSTE L001 TRỞ THÀNH ĐÔI SNEAKERS YÊU THÍCH NHẤT CỦA AD! | norsok l 001, 이 기사가 유용하다고 생각되면 공유하십시오, 매우 감사합니다.
