Top 48 How To Reset A Philips Tv That Wont Turn On 25484 Good Rating This Answer

You are looking for information, articles, knowledge about the topic nail salons open on sunday near me how to reset a philips tv that wont turn on on Google, you do not find the information you need! Here are the best content compiled and compiled by the Chewathai27.com team, along with other related topics such as: how to reset a philips tv that wont turn on why won’t my philips tv turn on, why won’t my philips tv turn on but red light is on, philips tv won’t turn on with remote or button, philips tv problems black screen, my philips tv turns on then off immediately, how to turn on philips tv without remote or power button, philips tv troubleshooting, philips tv blinking red light 3 times

Press the ‘MENU’ button. Press the cursor down to select SETTINGS. Press cursor right twice. Press the cursor down to select RESET AV SETTINGS.

Reset Philips TV

Unplug the power cable of your Philips TV from the wall outlet as well as all other accessories that are connected to your TV.
Wait 2 minutes.
Reconnect the power cable.
Try to turn your TV back on with the “Standby” button on your remote control.

Perform a Hard Reset on your Philips Smart TV

First, unplug the power cord from the outlet.
Next, look for the Power button on your TV remote and press it for 30 seconds.
Then, release the Power button and plug the power cord back in.
Lastly, turn on your Philips TV.

Contents

Is there a reset button on Philips TV?

Press the ‘MENU’ button. Press the cursor down to select SETTINGS. Press cursor right twice. Press the cursor down to select RESET AV SETTINGS.

How do I reset my Philips TV black screen?

Perform a Hard Reset on your Philips Smart TV

First, unplug the power cord from the outlet.
Next, look for the Power button on your TV remote and press it for 30 seconds.
Then, release the Power button and plug the power cord back in.
Lastly, turn on your Philips TV.

Why won’t my TV turn on but has power?

Try unplugging the TV from the electrical outlet. While its unplugged, hold down the power button on the TV itself for about 30 seconds. Once that time is up, release the button and plug it back into power. Power the unit back up and see if you can see any imagery.

How do I reset my TV without a remote?

Manual Factory Reset with buttons (Android TV & Google TV)
…
Power cycle (ALL TVs)

Unplug the television power cord from the electrical outlet. Leave it unplugged for 30 seconds.
Plug the power cord back into the electrical outlet.
If the TV doesn’t start up, use the Power button on the TV to turn it on.

How do I unfreeze my Philips TV?

However, here are a few steps that could stop the reboots:

Unplug all devices. Unplug all devices connected to the TV. …
Restart the TV. • Unplug the TV from the wall socket for at least 1 minute after the LED light has switched off. …
Exclude the connected devices. …
Test a different electrical socket. …
Contact Philips TV Support.

Why is my Philips TV blinking red?

If you see a red light flashing indicate that the remote control is working. The TV may be defective. If not, the remote control may be defective and need replacement.

How do I get my Philips TV out of safe mode?

Safe mode is displayed on the bottom left screen of the Android™ TV after you reboot the TV.
…
Restart

Press (Quick Settings) → Settings → System → Restart → Restart.
Press HOME → Settings → About → Restart → Restart.
Press HOME → Settings → Device Preferences → About → Restart → Restart.

Why has my Philips TV gone black?

When your Philips TV turns on but the screen remains black, the problem can also be caused by bad connections. Then check that the cables are correctly connected to the TV, decoder, box and wall outlet. Check that the cables are not damaged, that is to say that they are not burnt, melted, deformed or damaged.

What does a red flashing light on a Philips TV mean?

Step 1. Look at the front of your Philips model 62PL977437 television set and see if the red light is blinking. If it is, your television has entered protection mode and needs to be reset. The red light often blinks when the TV won’t turn on or continually shuts off unexpectedly.

What do you do when your TV screen goes black?

Replace the HDMI cable as it may have a short or another defect which causes the black screen issue. Unplug the TV for 5 minutes to attempt a reset. Unplugging the TV will reset the television and clear any temporary issues. Factory reset of the TV to resolve the issue.

How to Fix Your Philips TV That Won’t Turn On – Black Screen Problem

My Philips TV does not turn on anymore, why and what to do? – restartatorium.com

Article author: restartatorium.com
Reviews from users: 48157 Ratings
Top rated: 3.1
Lowest rated: 1
Summary of article content: Articles about My Philips TV does not turn on anymore, why and what to do? – restartatorium.com Updating …
Most searched keywords: Whether you are looking for My Philips TV does not turn on anymore, why and what to do? – restartatorium.com Updating Your Philips TV does not turn on anymore? Discover the quick and easy solutions to try to reignite it on your own
Table of Contents:

What to do when your Philips TV no longer turns on

Who to contact when your Philips TV no longer works

My Philips TV does not turn on anymore, why and what to do?

While you thought to spend your evening in front of the TV, the latter decided otherwise. Indeed, you notice that your Philips TV refuses to turn on despite your numerous attempts to start it. Unfortunately, this problem is relatively common on electronic devices and more particularly on televisions. But before imagining the worst, know that there are solutions to revive her. Then, what to do when your Philips TV no longer turns on?

First, learn the different checks and manipulations that you can do on your own to try and turn it back on. Then find out who to turn to if, despite your best efforts, your Philips TV doesn’t turn on.

What to do when your Philips TV no longer turns on?

Check the status of your remote

First of all, remember to check that your Philips TV no longer works simply because of your remote control. Particularly if the red standby light on your TV is on as this indicates that your Philips TV is powered.

To verify that the problem is not due to a faulty remote control, try turning on your device using the Power button located on the back or under the TV screen. If this works, and your Philips TV turns on again, the problem is with the remote control. Try to change the batteries first. If that doesn’t work, then you will need to replace it.

Remark : If your Philips TV does not have a Power button, you can test if the remote control is working by checking that it emits infrared signals using your smartphone. Find out the exact procedure by reading our article: my Philips remote control no longer works, what should I do?

Reset Philips TV

When your Philips TV no longer turns on, first try to start in standby mode. To do this, proceed as follows:

Turn on your Philips TV with the Power button located on the back or under your TV screen.

Wait 2 minutes for the TV to restart. If nothing is displayed, press the “Standby” button on your remote control.

If that doesn’t work, go to resetting your Philips TV. To do this, proceed as follows:

Unplug the power cable of your Philips TV from the wall outlet as well as all other accessories that are connected to your TV

Wait 2 minutes

Reconnect the power cable

Try to turn your TV back on with the “Standby” button on your remote control.

If that doesn’t work, go to the next steps.

Check the power of the Philips TV

When your Philips TV does not turn on overnight, it is very likely that a problem in the feeding process either at the origin. Then proceed to the following checks and operations to try to turn it back on:

Check that your TV connections are properly connected at the TV power supply box and at the wall outlet. Also make sure that the cables are not damaged (burnt, damaged, deformed, etc.).

at the TV power supply box and at the wall outlet. Also make sure that the cables are not damaged (burnt, damaged, deformed, etc.). If your Philips TV is plugged into a power strip, unplug the . Multiple sockets can cause voltage problems and interference preventing the proper functioning of electronic devices.

. Multiple sockets can cause voltage problems and interference preventing the proper functioning of electronic devices. Check the condition of the socket because the latter’s power supply may be defective and therefore insufficient to turn on your TV. There are two solutions for this: plug your TV into another outlet. If it turns on again, the socket is defective. You will then need to contact an electrician. plug another working device into the outlet that powers your TV. If the device does not turn on, the socket is defective. You will need to contact an electrician.

because the latter’s power supply may be defective and therefore insufficient to turn on your TV. There are two solutions for this:

If after all of these steps your Philips TV still does not turn on, go to the last step to try to revive it.

Check the condition of the television components

Be aware of the risk of electric shock when handling your TV. Turn off the power by unplugging your TV from the wall outlet or by turning off the circuit breaker connected to the device. If you are not proficient in handling, call in an expert.

It is possible that your Philips TV no longer turns on because one of its internal components no longer works. Indeed, the electrical and electronic components of televisions are relatively fragile. Over time, they can deteriorate or burn out. Many parts may have died and be responsible for the failure of your Philips TV: fuse, capacitor, resistor, transformer etc. Usually these are fuses and capacitors. Fortunately, with some electronics skills, they can easily be changed.

The fuses Cut off the power when they detect a voltage problem to avoid damaging your device. It therefore happens very often that they burn out. are located on the power supply board. You will therefore have to disassemble your Philips TV to gain access to it. Once you have found the faulty fuse, you will need to replace it on your own or by calling an expert. Important note: always replace the defective fuse with another fuse of the same amperage and voltage.

The capacitors allow to stabilize the electric current and to smooth the variations in a power supply. Unfortunately, capacitors tend to age badly and swell over time. They end up breaking down and blocking the power of your Philips TV which will therefore no longer turn on. These components are also located on the power supply board. You can test them with a multimeter. If one of them is defective, replace it or call an expert.

If after having tested all of these checks, your Philips TV still does not work and you have not found the fault, then you will need to call for professional service.

Who to contact when your Philips TV no longer works?

When unfortunately your Philips TV no longer turns on and that all the steps seen previously did not give any result, your last option will be contact a professional competent in repairing televisions. Several choices are available to you.

First of all, check that your Philips TV is not under warranty. This information can be found on your purchase invoice in case you purchased it from a professional. If you have recently purchased your TV or have opted for an extended warranty, you may not be charged for the repair or replacement of the device. This will of course depend on the origin of the failure.

If your Philips TV is not under warranty, you can contact one of the following services:

As a first step, you can contact Philips customer service. You have the possibility of contacting them by phone for a personalized service or of proceeding directly to a repair or exchange request.

You can also contact the after-sales service of the store where you bought your Philips TV or that of a store specializing in the sale of TVs.

Finally, you can contact an electronic equipment repair service, which is often faster in the process but slightly more expensive.

How to Fix Philips TV Black Screen/No Picture but with Sound Issue

It is more fun to watch your favorite TV series on a widescreen like Philips smart TV. But, it can be frustrating when you start to stream and end up with no picture appearing on the screen, only the sound is working. You can see that there is something wrong when you hear the voices on the video playing without seeing anyone or anything.

For some users, there is only a black screen with no backlight coming from the LCD screen. All these happen while the audio still works. However, others report that it’s the other way around, there is a picture but without sound.

Image credit: Philips

There are various reasons why you experience a no picture while hearing a sound error on Philips TV. Fortunately, you can try to troubleshoot and fix the problem even without yet identifying the cause of the error.

TODAY’S DEALS: Check out these limited-time offers on the latest Philips TVs at Amazon, Walmart or Philips.com!

How to Troubleshoot & Fix No Picture or Black Screen but with Sound Issue on Philips Smart TV

There are several workarounds and troubleshooting ways you can do to resolve the picture issue with your Philips TV. You can try to follow each of the solutions below one at a time and check if it fixes the smart TV audio and video error or not.

Try to Power Cycle your Devices

To do a power cycle, turn off your Philips TV.

Unplug your TV from the power outlet, including your router and modem.

Wait for at least 3 minutes before plugging them all back in and connecting to the Internet.

Turn on your Philips TV and try again.

Check your TV Hardware

It can be a problem with the power cord or HDMI cable on your Philips smart TV. Make sure there are no loose or broken cords. You can try to switch to a different HDMI port or plug in to a different power outlet.

Make Sure to Connect to the Right Input Source on your Philips TV

Press the Source button on your TV remote.

Try to check each input source one at a time until you can find the correct one.

Perform a Hard Reset on your Philips Smart TV

First, unplug the power cord from the outlet.

Next, look for the Power button on your TV remote and press it for 30 seconds.

Then, release the Power button and plug the power cord back in.

Lastly, turn on your Philips TV.

Do you have other ideas on how to fix the no-picture problem on Philips smart TV devices? You can share them in the comment section below.

DON’T MISS: Amazing deals & irresistible offers on Philips Smart TVs at Amazon, Walmart & or Philips.com!

Philips TV Shut OFF and Won’t Turn ON Solved

Philips TV is one of the most popular smart TVs. Like all other smart TVs, Philips also offers multiple features. You can stream live shows on this TV.

Since it is a smart device, Philips TV can create some technical issues. The most common is TV shuts OFF and won’t turn ON again.

Sometimes, the power light glows, the Philips TV is in standby mode, but the screen is blank not showing any picture. Other times, the TV does not turn on at all.

The power light does not glow and neither the screen comes on. This problem is caused by many reasons. There may be software or hardware issues.

For example, you have installed the latest software on your Philips TV but it could not install properly. This article will tell you all the possible solutions if your Philips TV shut off and won’t turn on.

1. Reset Your Philips TV

If your Philips TV shut off and does not turn on again then try to reset it. You can reset your Philips TV by power cycling it. Follow the instructions given below to power cycle your Philips TV;

Unplug the power cord of your Philips TV from the wall power outlet.

Wait for one minute or more. Press and hold the physical power button on the TV set. Meanwhile, plug back the power cord into the electric outlet.

In this way, you can turn your Philips TV on which is shut off.

2. Reset the Remote

If power cycling does not turn on your Philips TV then reset the remote. You can simply reset your Philips TV remote by the following method;

Open the back cover of the remote. Remove both of the batteries. Now, press and hold the power button on the remote for 15 seconds. Put the batteries in the remote again. Now, try turning on your Philips TV through the remote.

You can repeat this trick if your Philips TV shut off and won’t turn on again.

3. Test the Power Supply

If your Philips TV is shut off and does not turn on, inspect the power supply. Make sure the power cord is plugged in properly and not loose. Also, check the voltage supply.

You need a multi-meter to check the power voltage. The PSU standby output should give 5V. If it is delivering 4.5 or less, your Philips TV is not getting enough power.

Hence it will remain shut off and won’t turn on. There is a simple trick to fix the voltage issue.

Just disconnect the power switch from the mainboard. After a few moments, plug it back in again. Now, check the voltage supply again.

If the voltage remains the same; less than 5V, then you need to fix some hardware components.

4. Defective Hardware Components

Your Philips TV shut off and does not turn on problem is due to defects in hardware. One common reason is that fuse has blown off. Replacing the fuse can solve the issue readily.

However, there may be some intricate defects in the hardware. It is either due to the bad capacitors and PSU board.

If the voltage is 5 or above and your Philips TV still does not turn on, it is due to the defective motherboard. It needs repair or replacement.

Mainboard, power board, or capacitors are faulty. So, you need a technician’s help to find the real problem.

You can also contact the Philips TV manufacturer. If your Philips TV is under warranty then you can claim a refund or replacement.

Related: Turn ON Philips TV Without Remote

Final Suggestion

We have told you two basic troubleshooting methods to fix your Philips TV that shuts off and won’t turn on again. Power cycle your Philips TV and reset the remote.

You could try software update and factory restore if your Philips TV turns on. But, these tricks cannot work as your TV is not responding to power-on commands.

Most probably, it has defective hardware components. You can do a basic check at home. But you cannot replace or repair any component without prior knowledge of technical gadgets.

So, consult a TV mechanic to get your Philips TV repaired. There may be a minor issue that can be solved very easily and does not cost you much.

However, replacing the whole motherboard or power board will be expensive. So, you should compare the price of repair with a new Philips TV set.

Decide according to your budget and your TV model. If your Philips TV is older than 4 to 5 years then better to buy a new one. While you should consider repairing it if your Philips TV is new.

Hopefully, this article has helped you in fixing your Philips TV that is shut off and won’t turn on.

So you have finished reading the how to reset a philips tv that wont turn on topic article, if you find this article useful, please share it. Thank you very much. See more: why won’t my philips tv turn on, why won’t my philips tv turn on but red light is on, philips tv won’t turn on with remote or button, philips tv problems black screen, my philips tv turns on then off immediately, how to turn on philips tv without remote or power button, philips tv troubleshooting, philips tv blinking red light 3 times

Top 48 How To Reset A Philips Tv That Wont Turn On 25484 Good Rating This Answer

Is there a reset button on Philips TV?

How do I reset my Philips TV black screen?

Why won’t my TV turn on but has power?

How do I reset my TV without a remote?

How do I unfreeze my Philips TV?

Why is my Philips TV blinking red?

How do I get my Philips TV out of safe mode?

Why has my Philips TV gone black?

What does a red flashing light on a Philips TV mean?

What do you do when your TV screen goes black?

My Philips TV does not turn on anymore, why and what to do? – restartatorium.com

How to Troubleshoot a PHILIPS TV That Won’t Turn On – YouTube

How to reset Philips TV to factory settings? | Philips

How to Factory Reset Your Philips TV – YouTube

How to Fix Philips TV Black Screen/No Picture but with Sound Issue

Philips TV Shut OFF and Won’t Turn ON Solved – How To Finders

What to do if the TV will not switch on? | Philips

What to do if the TV will not switch on? | Philips

Philips TV Won’t Turn On: Fixes – Smart TV Tricks

How do I reset my Philips TV that won’t turn on? | TechShift.net

My Philips TV does not turn on anymore, why and what to do?

How to Fix Philips TV Black Screen/No Picture but with Sound Issue

Philips TV Shut OFF and Won’t Turn ON Solved

Leave a Comment Cancel reply