Are you looking for an answer to the topic “bissell deep clean proheat 2x professional pet manual“? We answer all your questions at the website https://chewathai27.com/ppa in category: https://chewathai27.com/ppa/blog/. You will find the answer right below.
Table of Contents
Review \u0026 How to Use Bissell 2X DeepClean Professional Pet carpet cleaner
See some more details on the topic bissell deep clean proheat 2x professional pet manual here:
Bissell 899110 17N4 Series Deepclean Proheat 2X …
DEEPCLEAN PROHEAT 2X® PROFESSIONAL PET. IMPORTANT SAFETY INSTRUCTIONS. TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, OR INJURY:.
Source: manuals.plus
Date Published: 7/9/2021
View: 9523
Deep Clean ProHeat 2X Professional Pet Carpet Cleaner
Don’t just vacuum away dirt, wash deep into the fibers using the BISSELL® DeepClean ProHeat 2X Professional Pet and BISSELL® 2X Pet Stain & Odor Cleaning …
Source: www.bissell.com
Date Published: 8/10/2022
View: 9957
Bissell DEEPCLEAN PROHEAT 2X Manuals – ManualsLib
View online or download Bissell DEEPCLEAN PROHEAT 2X User Manual. … DEEP CLEAN PROHEAT 2X PROFESSIONAL PET. Brand: Bissell | Category: Steam Cleaner …
Source: www.manualslib.com
Date Published: 6/20/2022
View: 3206
BISSELL DEEPCLEAN PROHEAT 2X PROFESSIONAL PET …
FREE ENGLISH PDF. OPERATING INSTRUCTIONS. USER GUIDE – USER MANUAL. OWNER GUIDE – OWNER MANUAL. REFERENCE GUIDE – REFERENCE MANUAL.
Source: manual-hub.com
Date Published: 9/11/2022
View: 1692
deepclean proheat 2x – professional pet – FDOCUMENTS
DEEPCLEAN PROHEAT 2X ® PROFESSIONAL PET USER GUIDE 17N4 SERIES COSTCO ITEM# … Use only BISSELL cleaning products intended for use with this appliance to …
Source: fdocuments.in
Date Published: 5/1/2022
View: 9640
Bissell Deep Clean ProHeat 2X Professional Pet Upright …
Bissell Deep Clean ProHeat 2X Professional Pet Upright Carpet Cleaner 17N49 – I Would Like To Have A Manual For My Bissell Deep.
Source: www.helpowl.com
Date Published: 9/11/2021
View: 1947
Bissell 899110 17N4 Series Deepclean Proheat 2X Professional PET User Guide
DEEPCLEAN PROHEAT 2X ® PROFESSIONAL PET
IMPORTANT SAFETY INSTRUCTIONS
TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, OR INJURY:
Connect only to a properly grounded outlet. See grounding instructions. Do not modify the 3-pin grounded plug.
Do not leave the device unplugged. Unplug from outlet when not in use and before servicing.
Indoor use only.
Do not use as a toy. Special attention is required when used by or near children.
Do not use it for purposes other than those described in this user manual. Only use attachments recommended by the manufacturer.
Do not use with a damaged cord or plug. If the device is not working properly or has been dropped, damaged, left outdoors, or dropped into water, have it repaired by an authorized service center.
Always install the float before each wet shot.
Do not pull or carry the cord, use the cord as a handle, close a door by the cord, or pull the cord around sharp edges or corners. Do not run the device over the cable. Keep cords away from hot surfaces.
Do not unplug the connector by pulling on the cord. To unplug, grasp the connector, not the cord.
Do not touch the plug or the device with wet hands.
Do not insert objects into openings. Do not use if an opening is blocked; Keep the openings free of dust, lint, hair, or anything that might restrict airflow.
Keep hair, loose clothing, fingers and all parts of body away from openings and moving parts.
Turn off all controls before plugging or unplugging the device.
Be extra careful when cleaning on stairs.
Do not use to pick up flammable or combustible materials (lighter fluid, gasoline, kerosene, etc.) or in areas where they may be present.
Do not use the device in an enclosed space filled with fumes given off by oil-based paints, paint thinners, some moth repellents, combustible dust, or other explosive or toxic fumes.
Do not use to vacuum up toxic materials (chlorine bleach, ammonia, drain cleaner, etc.).
Do not pick up burning or smoking objects such as cigarettes, matches or hot ashes.
Use only BISSELL cleaning products intended for use with this device to avoid damage to internal components. Refer to the Cleaning Fluid section of this manual.
Unplug before connecting the TurboBrush Tool.
Don’t dive. Use only on surfaces dampened by the cleaning process.
Place the device on a flat surface.
Do not carry the device while it is in use.
WARNING
Improper connection of the equipment grounding conductor can create a risk of electric shock. Contact a qualified electrician or serviceman if you are not sure the outlet is properly grounded.
DO NOT ALTER THE PLUG. If it does not fit the outlet, have a proper outlet installed by a qualified electrician. This appliance is intended for use on a 120 volt rated circuit and is equipped with a grounding plug that looks like the plug shown in the illustration. Make sure the device is plugged into an outlet that has the same configuration as the plug. A plug adapter should not be used with this appliance.
GROUNDING INSTRUCTIONS
This device must be connected to a grounded mains supply. In the event of a malfunction or failure, grounding provides a safe path of least resistance for electrical current, reducing the risk of electrocution. The cord for this equipment has an equipment grounding conductor and a grounding plug. It must only be connected to an outlet that is properly installed and grounded in accordance with all local codes and ordinances.
SAVE THESE INSTRUCTIONS FOR FUTURE USE
This model is intended for domestic use only. Commercial use of this device will void the manufacturer’s warranty.
www.BISSELL.com
Thank you for purchasing a BISSELL Deep Cleaner
Thank you for choosing a BISSELL Deep Cleaner. Everything we know about floor care went into the design and construction of this complete, high-tech home cleaning system.
Your BISSELL deep cleaner is well made and backed by a three year limited warranty. We also stand behind it with a knowledgeable, dedicated customer service department, so if you should ever have an issue, you’ll receive fast, thoughtful help.
My great-grandfather invented the floor sweeper in 1876. Today, BISSELL is a global leader in the design, manufacture and service of quality home care products like your BISSELL Deep Cleanser.
Thank you again from all of us at BISSELL.
Mark J. Bissell Chairman and CEO
product view
Spray Trigger Extra Long Power Cord Top Handle Flex Hose Power Switch Easy Carry Handle Tank Carry Handle 2-in-1 Large Capacity Water Tank Easy-Remove Nozzle EdgeSweep® Brushes Lower Base Upper Hose Holder Lower Hose Holder Handle Tilt Pedal
Assembly
Your deep cleaner consists of four easy-to-assemble components:
Top handle with screws (screws attached to handle)
Lower Base Upper Hose Bracket
Upper tool holder
The only thing you need to assemble your cleaner is a Phillips screwdriver.
Slide the top handle onto the bottom base. Screw 2 screws into the marked holes. Attach the top tool holder to the top handle by snapping the bottom half first, then snapping the top half. Place the upper hose bracket on the back of the upper handle and secure with a screw. Snap tools onto the upper tool holder. Wrap up the power cord and flex hose. Insert the hose bar into the hose clamp on the upper hose sleeve.
NOTE: Be sure to wrap the hose in the correct direction to use the hose clamp. Make sure the hose starts at the back of the machine and wraps to the front.
Your deep cleaner assembly is now complete!
operations
cleaning fluid
Have plenty of genuine BISSELL 2X formula on hand so you can clean and protect whenever it fits into your schedule. Always use original BISSELL deep cleaning formulas. Non-BISSELL cleaning solutions may damage the machine and will void the warranty.
Professional deep cleaning Pet stains and odor Deep cleaning and protection Allergen cleaning DeepClean + Refresh Stain pre-treatment Best for Out Cleans all other formulas Removes stubborn pet stains and contains patented odor removal technology Deep cleans carpets and protects against future stains with Scotchgard™ Protector Helps remove pet & pollen allergens Powerful Cleansing with a refreshing fragrance Pre-treatment to penetrate and loosen stubborn stains 2X Concentrated X X X X X Scotchgard™ Protection® X X X
*BISSELL ONLY Protects against future stains with Scotchgard™ Protector
Before you clean
Move furniture to another area if cleaning an entire room (optional). Before deep cleaning, pick up all loose dirt, debris, and pet hair. It is recommended to vacuum the area prior to deep cleaning. Plan your cleaning route to leave an exit trail. It’s best to start in the corner farthest from your exit. A pre-treatment (optional) is recommended to improve cleaning performance for heavily soiled carpets in high traffic areas such as entrances and hallways.
BISSELL stain pre-treatment
Spray the BISSELL Stain Pretreat formula onto high-traffic areas, soiled areas or stains. Leave on for at least 3 minutes. Clean as usual following the instructions on the next page.
Machine preparation
Fill the 2-in-1 water tank
Remove the tank from the base of the machine by lifting the tank carrying handle. Carry it to the sink like a bucket. Unlock the top of the tank from the bottom by lifting the tank latches on either side of the tank. Using the included measuring cup, pour 5 oz of the BISSELL 2X formula into the high-capacity bladder. Fill the remainder of the high capacity bladder with hot tap water (maximum 60°C/140°F). DO NOT BOIL WATER OR MICROWAVE WAVES.
NOTE: Always use genuine BISSELL 2X formulas to maximize cleaning and ensure the safety of your machine.
Place the top of the tank back onto the bottom and secure the latches on either side.
NOTE: Remember to secure the tank latches on both sides of the tank and check they are secure before lifting the tank.
1st 2nd
3rd 4th
carpet cleaning
Plug the device into a suitable power outlet and press the on/off button on the front of the handle.
Tilt the handle by pushing the lever on the back of the machine behind the 2-in-1 water tank. cleaning strokes. While pulling the trigger, make a slow wet pass forward and another back. Warning: do not overwet. Be careful not to drive over loose objects or edges of carpets. Binding of the brush can lead to premature belt failure.
NOTE: Your machine is equipped with a circuit breaker that will automatically shut off the brush if a large or loose object gets caught in the brush roll. In this case, unplug the device, remove the foreign object, and then plug the device back in to reset the circuit breaker.
Release the trigger and slowly sweep back and forth over the same area once to dislodge dirty water residue and aid in drying. Repeat the cleaning passes until the solution pulled up appears clean. Continue the passes without pulling the trigger until you can no longer see water being pulled up.
Cleaning with attachments
Your deep cleaner comes with a hose and at least one attachment for cleaning stairs, upholstery, and more.
Important! If you use it to clean upholstery, check the upholstery labels before cleaning.
Before cleaning, check the manufacturer’s label. “W” or “WS” on the label means you can use your deep cleaner. If the label is coded with an “X” or “S” (with a diagonal stripe running through it) or says “Dry Clean Only,” do not proceed with a deep cleaning machine. Do not use on velvet or silk.
If the manufacturer’s plate is missing or not coded, contact your furniture retailer.
Test for color fastness in an inconspicuous area. If possible, check upholstery filling. Colored fill may bleed through fabric when wet. Plan activities to give the upholstery time to dry. Before deep cleaning, pick up loose dirt, debris, and pet hair.
Follow the instructions on page 6 to fill the 2-in-1 water tank.
The machine is equipped with an automatic switch. To clean with the hose, simply lock the device in an upright position.
Attach the cleaning tool to the end of the hose.
Plug in the power switch and turn it on.
NOTE: For Stain Catcher Tool and 3-N-1 Tool instructions, see pages 9 and 10.
Clean by pressing the trigger to spray solution onto the area to be cleaned. Slowly move the tool back and forth across the soiled surface. Release the trigger to vacuum up dirty water. Continue cleaning the area in small increments until no more dirt can be removed. Rinse (optional) and aspirate as needed. Warning: do not overwet.
Remove tools and rinse under clean, running water. Dry and reattach to the end of the hose.
It is recommended to siphon clean water from a bowl to flush out the hose.
Before reconnecting, lift and stretch the end of the hose to ensure all water is removed from the hose.
Wrap the flexible hose around the hose holder.
Drain and rinse 2-in-1 water tank according to instructions on page 11.
manufacturer’s mark
4.
9.
Cleaning with tools
Stain catcher tool
The Stain Trapper Tool is great for keeping debris out of the machine’s hose system.
Attach the Stain Trapper Tool to end 1.
of the hose.
Gently scrape up any semi-solids with a spoon or spatula. Do not use a knife or other sharp-edged utensil as this may damage the carpet or upholstery. Squeeze the trigger on the hose to spray solution on the mess. Use the brushes carefully
scrub the mess and then vacuum the mess away. Be careful not to move the tool back
back and forth too fast, otherwise dirty water will flow 4.
back in the hose.
NOTE: Do not fill the Stain Trapper tank past the FULL line.
Turn to the unlock icon to empty the tool bin.
NOTE: Make sure the top of the tool is facing up or dirty water will spurt out of the tank.
Empty the dirty water into a sink and rinse out
with clean water. Replace the reservoir with the liner 6.
rotate up and towards the lock icon.
The front faceplate of the tool can also be removed and flushed for easy cleaning. Simply pull the faceplate down to remove.
operations
3-N-1 stair tool
Attach the tool to the end of the hose. Rotate the tool head to the desired setting:
The flat edge can be used to clean flat areas. The pointed edge can be used to clean crevices. The notched edge can be used to clean curved areas
Make sure the spray tip of the tool is pointing down. Press the trigger and slowly move the tool back and forth across the stained area. Release the trigger to vacuum up water and dirt. To clean the tool, simply remove the tool from the end of the hose and rinse with water. The front faceplate of the tool can also be removed and flushed for easy cleaning. Remove the tank from the base of the machine by lifting up on the tank carrying handle. Carry it like a bucket to a sink or outside where you dispose of the dirty water. Unlock the top of the tank from the bottom by lifting the tank latches on either side of the tank. Remove the top of the tank by lifting the handle. Empty the pet hair basket by sliding it towards the front of the tank and lifting.
Replace pet hair basket before storing/continuing cleaning.
Lift the bottom of the tank; Pour dirty water into the sink through the rectangular opening in the corner of the tank.
NOTE: You may notice deposits of hair and dirt on the carpet or in the tank that have been loosened by the cleaning action. This waste should be collected and disposed of. Check the red lint filter near the duct on the back of the machine base for debris and remove before proceeding.
Fill the high capacity bladder with clean, hot tap water (max 60°C) following the instructions on page 6.
NOTE: Remember to secure and test the tank latches to ensure they are secure before lifting the tank.
Rinse with water (recommended). Wash
is an optional step that can be performed during the cleaning process or after the carpet area is finished. Deflate the high-capacity bladder when needed and only refill with hot tap water.
Replace the tank on the machine. Make sure to throw a forward (wet) punch by pulling the trigger and a backward (wet) punch, followed by a forward and backward (dry) punch, releasing the trigger. Continue doing this until the water you see coming out of the nozzle is clear. (See page 13 for more device care tips.)
stain removal
Don’t delay! Taking care of an accident soon after it occurs ensures optimal cleaning. Leaving it for a long period of time can cause it to harden and become permanent.
Blot up liquids with an absorbent cloth or paper towels. White materials are recommended as certain dyes may bleed and worsen the stain. Gently scrape up any semi-solids with a spoon or spatula. Do not use a knife or other sharp-edged utensil as this may damage the carpet or upholstery. If the area has already dried, separate and remove all accessible semi-solids and debris from the carpet before deep cleaning. Test all stain removal formulas on an inconspicuous area first. This is important as some dyes and materials could be damaged or discolored by cleaning solutions. Should such a change occur, try another solution or contact a professional. When cleaning Berber rugs, gently run your machine over a hidden area. If no lint appears, continue cleaning the soiled area. Spray the BISSELL Stain Pretreat evenly over the stained area. Don’t get wet. Wait 3-5 minutes. Gently work the solution in by patting the area with a clean, damp, stain-proof cloth. Machine clean large areas or use the hose to clean stains, stains and hard-to-reach areas.
machine storage
After cleaning is complete, ensure the 2-in-1 water tank is emptied, rinsed and dried before next use.
NOTE: Store the cleaner in a protected, dry place. Because this product uses water, it must not be stored where there is a risk of freezing. Freezing will damage internal components and void the warranty.
Maintenance & Care
For best results, a few simple steps can ensure your machine is well maintained after cleaning is complete.
Flush your machine of any remaining residual solution. Fill the 2-in-1 water tank with clean, hot tap water. Tilt the handle back and squeeze the spray trigger for 15 seconds while moving forward and backward on the carpet. Release the trigger to suck. Repeat for another 15 seconds. Continue without pressing the trigger until no more water is drawn in. Press the power button to turn off the device. Disconnect the device from the mains and wrap up the power cord. Empty dirty water or residual solution and clean water from the 2-in-1 tank. Rinse the 2-in-1 water tank with hot tap water, making sure to clean under and around the high-performance bladder. The upper half of the tank can be flushed clean through the nozzle area. Clean the red filter of any debris that may have accumulated. Keeping the 2-in-1 water tank away from the base of the machine, simply remove the floorhead by turning the locking keys (see image for location) to the ‘unlock’ position and lifting. Rinse the floor nozzle on the tap. Loose hair or debris can be pulled off the brush rolls and discarded. For the most thorough cleaning before storage, follow the instructions below to remove and replace the brush rolls and belts on pages 14 and 15. Replace the nozzle by aligning the pawls with their slots and snapping the nozzle and end caps back onto the Put foot from The machine. Secure it by turning the locking keys to the “lock” position. To clean any used attachments, remove them from the hose and rinse under clean, running water. Dry the attachment and put it back in the hose holder. Clean the hose by siphoning clean water from the faucet. Before reinserting, lift and stretch the end of the hose to ensure all water is removed from the hose. See page 8. To clean the suction diverter, remove the two screws on the back of the diverter housing. Take the diverter housing to a sink and rinse with water. Be sure to remove any debris that can build up and cause a clog. Reinstall the idler housing and the two screws. After the carpet is dry, vacuum again to remove hair and lint.
Remove and replace drive belt
Occasionally it may be necessary to replace one or both belts. If this is required, please follow the instructions below.
Switch off the device and pull the plug out of the socket. Remove the 2-in-1 water tank. Put aside. Remove the nozzle and end caps by following the instructions in step 5 on page 13. Turn the machine on its side.
IMPORTANT: Cord side up. Remove 1 silver screw from swing arm. Remove swivel arm by lifting slightly. Remove and replace the drive belt by attaching it first to the small drive wheel and then to the end of the inner brush.
Liquid Connection Point Filter Maintenance
Periodic cleaning of the fluid connection point in the spray nozzle may be required.
To clean the fluid port, remove and invert the nozzle. Clean the filter at the end of the fluid connection point with a small paper clip and reattach the nozzle to the machine.
Brush removal and brush belt replacement
Brushes can be removed for cleaning or replacement as needed.
Follow the drive belt removal instructions on page 14. Remove the brushrolls by pulling them off the metal bars. Be careful not to lose the small washer on each end of the brushrolls. Replace the brush belt if necessary. Place cleaned or new brushrolls back onto the rods. Make sure there is a washer on each end of the casters before sliding them onto the bar. Be sure to slide the rod through the bushing to ensure proper seating. Reattach the brush belt to the gears on the small roller brushes on the underside. Replace the drive belt by following step 8 on page 14. Place the swing arm and screw it with the silver screw. Replace the nozzle by aligning the pawls with their slots and replacing the nozzle on the base of the machine. Secure it by turning the locking keys to the “lock” position.
If you have questions or are having trouble installing or replacing your belts or brushes, please contact BISSELL Customer Service.
Troubleshooting
Problem Possible causes Remedy Reduced spray jet or no spray jet The water tank may be empty. Fill the high-capacity bladder with hot tap water. The tank may not be fully seated. Turn off the device. Remove and reinsert the tank. The pump may have lost prime. Turn the device OFF and then back ON. Wait a minute and then press the shutter button. DirtLifter® PowerBrush does not rotate. The belt is turned off or broken. Turn off the device and unplug it from the power outlet. Follow instructions on page 15. The circuit breaker on the machine may have tripped. Turn the machine OFF and unplug the power cord from the outlet. Check whether foreign objects are caught in the brush roll. remove object. Plug in the machine to reset the circuit breaker. The cleaner does not absorb any solution. The tank may not be seated properly. Take out the 2-in-1 water tank and put it back in place so that it is firmly seated on the device. The tank may not be assembled correctly Make sure the tank caps on both sides of the tank are properly latched. Lift the tank by the handle to make sure they are both properly latched. The 2-in-1 water tank is empty Check the liquid levels in the high-capacity bladder. The 2-in-1 water tank has taken in maximum dirty water and the red float flap has closed. Empty 2-in-1 water tank. Fill the high capacity bladder with clean, hot tap water and replace. The red float door in the tank may have closed because an object was bumped or the machine was rocked back and forth too quickly. Turn the machine OFF and allow the red float door to fall to the open position. Turn the device back on to continue cleaning. Make sure your forward and backward movements are done at a slower pace. Red lint filter near air duct is dirty Follow cleaning instructions in step 4 on page 13.
Any other maintenance or service not covered in the manual should be performed by an authorized service representative.
Thank you for purchasing a BISSELL product.
If you have any questions or concerns, BISSELL is at your disposal. Contact us directly at 1-800-237-7691.
These items are available for your BISSELL Deep Cleaner. Call 1-800-237-7691 or visit www.BISSELL.com
PART NUMBER PART NUMBER PART NUMBER PART NUMBER 160-0087 Tank Cap (Blackberry Purple) 160-0092 Tank Base 160-0097 Tank Cap and Liner Assembly 160-0098 Floor Nozzle with End Cap Assembly 203-6845 Float Flap 160-0209 Measuring Cup 160-0104 Brush Roll – 6 Rows (includes 1 brush, axle , 2 swivel arms) 160-2669 Small brush belt (Right side) 203-6804 Large brush belt (Left side) 160-0079 Upper hose and cord wrap
*Not all parts are included with every model.
Accesories
These items are available for your BISSELL Deep Cleaner. Call 1-800-237-7691 or visit www.BISSELL.com
PART NUMBER PART NUMBER PART NUMBER PART NUMBER 203-6651 3″ Stubborn Stain Tool 203-6652 Powered TurboBrush® Hand Tool 203-6653 4″ Upholstery Tool 203-6654 6″ Stair Tool 203-6655 Spray Crevice Tool 1603650 3-N-1 Stair Tool 203-7412 Deep Reach Pet Tool 160-0057 Stain Trapper Tool 62E5-2 2X Deep Cleansing and Protecting Formula with Scotchgard™ Protection 60 oz. 99K5-2 2X Pet Stain & Odor Formula with Scotchgard™ Protection 60 oz. 89Q5-2 2X Allergen Cleansing Formula 60 oz. 1052 DeepClean + Refresh Formula 60 oz. 78H6-3 2X Professional Deep Cleansing Formula with Scotchgard™ Protection 48 oz. 4001 Stain PreTreat 22 oz.
*Not all parts are included with every model.
warranty services
This warranty gives you specific legal rights, and you may also have other rights which vary from state to state. If you need additional instructions about this warranty or have any questions about what it may cover, please contact BISSELL Consumer Care via email, phone or mail as detailed below.
Limited three-year warranty
Subject to the *EXCEPTIONS AND EXCLUSIONS noted below, upon receipt of the product, BISSELL will, at BISSELL’s option, repair or replace (with new or remanufactured components or products) free of charge from the date of purchase by the original purchaser for a period of three years. any defective or non-functioning part.
See information below under “If Your BISSELL Product Requires Service”.
This warranty applies to products used for personal and not commercial or rental service. This warranty does not cover fans or routine maintenance components such as filters, belts or brushes. Damage or malfunction caused by negligence, misuse, neglect, unauthorized repair, or other use inconsistent with the owner’s manual is not covered.
BISSELL WILL NOT BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES OF ANY KIND RELATED TO THE USE OF THIS PRODUCT. BISSELL’S LIABILITY SHALL NOT EXCEED THE PURCHASE PRICE OF THE PRODUCT.
Einige Staaten erlauben den Ausschluss oder die Beschränkung von Neben- oder Folgeschäden nicht, sodass die obige Beschränkung oder der Ausschluss möglicherweise nicht auf Sie zutrifft.
*AUSNAHMEN UND AUSSCHLÜSSE VON DEN BEDINGUNGEN DER BESCHRÄNKTEN GARANTIE
DIESE GARANTIE GILT AUSSCHLIESSLICH UND ANSTELLE ALLER ANDEREN MÜNDLICHEN ODER SCHRIFTLICHEN GARANTIEN. ALLE STILLSCHWEIGENDEN GEWÄHRLEISTUNGEN, DIE DURCH GESETZ ENTSTEHEN KÖNNEN, EINSCHLIESSLICH DER STILLSCHWEIGENDEN GEWÄHRLEISTUNGEN DER MARKTFÄHIGKEIT UND EIGNUNG FÜR EINEN BESTIMMTEN ZWECK, SIND AUF DIE DAUER VON DREI JAHREN AB DEM KAUFDATUM, WIE OBEN BESCHRIEBEN, BESCHRÄNKT.
Einige Staaten erlauben keine Beschränkungen der Dauer einer stillschweigenden Garantie, sodass die obige Beschränkung möglicherweise nicht auf Sie zutrifft.
HINWEIS: Bitte bewahren Sie Ihren Originalkaufbeleg auf. Im Garantiefall dient es als Nachweis des Kaufdatums.
Wenn Ihr BISSELL-Produkt gewartet werden muss:
Wenden Sie sich an den BISSELL-Verbraucherservice, um ein autorisiertes BISSELL-Servicezentrum in Ihrer Nähe zu finden.
Wenn Sie Informationen zu Reparaturen oder Ersatzteilen benötigen oder Fragen zu Ihrer Garantie haben, wenden Sie sich an BISSELL Consumer Care.
Website oder E-Mail:
www.BISSELL.com
Anruf:
BISSELL-Verbraucherbetreuung 1-800-237-7691
Montag – Freitag 8:00 – 22:00 Uhr ET Samstag 9:00 – 20:00 Uhr ET
Sonntag 10:00 – 19:00 Uhr ET
Bissell 899110 17N4 Series Deepclean Proheat 2X Professional PET User Guide – Download [optimiert]
Bissell 899110 17N4 Series Deepclean Proheat 2X Professional PET User Guide – Herunterladen
Please enable JS and disable all ad blockers
BISSELL DEEPCLEAN PROHEAT 2X PROFESSIONAL PET 17N4 (01) PDF MANUAL
We use cookies on our website to give you the most relevant experience by remembering your preferences and repeat visits. By clicking “Accept”, you consent to the use of ALL the cookies.
Related searches to bissell deep clean proheat 2x professional pet manual
Information related to the topic bissell deep clean proheat 2x professional pet manual
Here are the search results of the thread bissell deep clean proheat 2x professional pet manual from Bing. You can read more if you want.
You have just come across an article on the topic bissell deep clean proheat 2x professional pet manual. If you found this article useful, please share it. Thank you very much.
