Build False Chimney Breast? Best 47 Answer

GRP chimneys and mock or mock chimneys

For several years, Capvond Composites has been producing many different types of GRP chimneys. These are sometimes referred to as false chimneys, dummy chimneys, imitation chimneys, or fake chimneys. In addition to being decorative, GRP mock chimneys or mock chimneys are used to conceal heating vents that protrude through the roof structure and may not blend with the surrounding architecture or house style.

Because of their strong but lightweight construction, a lot of space can be saved as no construction work is required to support the GRP bill or false chimney. This can be a significant advantage when designing offices, nursing homes, hotels and other commercial premises, as the space can be used as freely as possible. Many types of GRP chimneys, or false chimneys, have been made, from simple one-pot designs suitable for small homes to large multi-pot designs that can be over six feet tall.

Attached to the roof by a simply constructed upstand, the finish of each design can vary from smooth to coarsely textured. Each FRP mock or mock chimney is made to order and to a specific design.

Find out more about Capvond’s cast composite decking and bricks here.

Download our brochure on GRP mock chimneys / mock chimneys (pdf, 41Kb)

Click on the photos below to view some replica or fake GRP chimneys.

Have you imagined sitting next to a cozy fireplace in your house, reading a good book, snuggled up in a blanket and hot cocoa, only to find out you don’t have a fireplace… and if you put in a real one, you would almost blow your bank account? Yes, I’ve had this vision many times in my life and that’s why when we built our house I was anxious that we have a fireplace built. Then I realized I wanted one in my bedroom… and it was too late… Well, why not include a faux fireplace? Believe it or not, they’re actually quite simple and often very inexpensive. What if I told you that I had 13 stunning DIY fake fireplace ideas that you would want in your home today!

Fake fireplace ideas for your home today and enjoy it all year round!

You won’t believe how many options there are when you decide to create a faux fireplace in your home. Read on to see some of the most swooning DIY faux fireplace ideas I’ve ever seen. You will wonder if they are real or not! And you’ll want to snuggle up to each one of them.

I have 2 real wood fireplaces in my house… and it’s no secret, real fireplaces are where they are! Nothing compares to the real crackle of the log fire and the indescribable feeling you get when snuggled up next to someone reading a good book or snuggling with that special someone. It’s like… best feeling ever and a really great idea. I’m someone who hates the feel of a stove and being forced to blow through the vents, I’m a big fan of radiant heat and that’s what you get with a real fireplace.

Unfortunately, having a real fireplace is often difficult and installing a real fireplace in a home can be very expensive. Often certain areas do not allow the use of real fireplaces. However, don’t let that discourage you!

I’ve wanted a real fireplace in my bedroom for a long time. It’s the coldest room in the house and the other fireplaces just don’t heat it well. As someone who dislikes our stove for a variety of reasons (I feel claustrophobic, I prefer radiant heat, it’s expensive, I just don’t like it), I knew I had to find another way to decorate a fireplace create my bedroom in it.

That’s when I thought about building a fake chimney. I know you might be thinking about that store-bought mantel with the fake flame and all the jazz. No, if that’s your jam, then that’s great! But that’s not what I wanted. I wanted something unique and cozy with a touch of rustic farmhouse flare.

Various DIY Fake Fireplace Ideas and Options:

You can create a DIY fireplace or mantel in many different ways with so many different options. Maybe you just want the look of a fireplace so you have a focal point for your living room or bedroom.

You can definitely do that with a faux mantel and even add a DIY electric fireplace. This is how we did it in our bedroom. I’m so glad we did too. It was a wonderful head source for the rest of the room.

Whatever your reasons for having a fake fireplace in your home, you can do it! There are so many options to purchase including pre made mantels etc. To help you get inspiration for whatever you want to create with your fireplace and mantel I’ve rounded up some of my favorite DIY faux fireplace ideas for you to peruse be able.

Most of these DIY faux fireplace ideas have full tutorials on how to build them, so click the link to see more of the projects.

First I want to show you mine:

fake fireplace ideas that will take your home to the next level and stay on budget! width=”600″ height=”452″>

We built my own faux fireplace surround over a weekend and I knew exactly what I wanted. I was inspired by old fireplaces with a freestanding electric insert stove in the hearth of the fireplace and mantel. I wanted it too, so I did something rustic farmhouse. CLICK HERE to see the full project and tutorial.

I wanted a faux fireplace surround that would give off heat and this freestanding electric range does the job! It’s the coziest place in our house in the winter (or at least where my kids want to be because their rooms just aren’t that fun I guess).

Now let’s look at some of my favorite fireplaces and amazing mantels:

If you’re looking for a great fireplace that’s a pretty focal point, check out this one by Lauren at Bless’er House.

Isn’t this room beautiful? Love the whitewashed stacked stone and overlap behind the TV. It has real purpose and makes a big statement. The faux tree trunks in the faux fireplace surround add a bit of an organic feel and the design of the offering is also excellent. You can see exactly how they made it if you check out this website.

What about this faux mantel from The Honeycomb Home? I just love what adding a fireplace to a room does. It gives the room a focal point and adds so much style.

Faux fireplace surround and mantel! So pretty!” width=”597″ height=”398″>

This cheap faux fireplace with a chippy white mantel, faux brick insert and board and slat lets it shine and gives the room a really cozy feel.

Well how about these faux fireplace insert ideas from DIY Decor Mom for a vintage look. The moldings are a bit more traditional and the dark marble is the perfect accent. This space immediately feels more inviting.

fake fireplace surround ideas for your home!” width=”599″ height=”799″.

Now I’m absolutely obsessed with this new faux fireplace from The Handmade Haven.

Faux fireplace ideas with storage space” width=”600″ height=”779″>

This fake fireplace comes complete with overlap and tons of storage space! That’s a brilliant idea! I love every bit of it and wish I had more storage space in mine! This fake fireplace is anything but fake! You can customize this style of fireplace to your liking and create just the right piece for your home. The brick insert is nice, but would work with other surfaces as well. And imagine dressing it up with something special every season.

The next one is also so special! This Jennifer Rizzo fake fireplace and mantel is so pretty. I love that she said, “If you build it, he’ll come” when she talked about Santa coming after they built that chimney before Christmas. It’s the perfect place to hang up stockings and sit and sip a hot cider.

fake fireplace insert and mantel ideas!” width=”453″ height=”640″>

That just goes to show that there are so many wonderful ways to create a fake fireplace that doesn’t look fake! I love this fireplace… and the next thing I want to show you is just so freaking adorable….

I think this idea with the wrong use of fire was also made by Jennifer Rizzo. is so cute! I mean, talk about being super smart and creative.

I mean, how can you not love this fireplace! This yard fire is so whimsical and such a fun and unique way to add character to a faux fireplace. Check out the full tutorial on how she did it here.

Next, here’s another fine example of a fake DIY fireplace mantel, dressed up in all its glory for the holidays. I love this faux fireplace from the Shabbyfufu blog and it’s very similar to another one on this post. But the birch trunks in action and all the lush colorful foliage on the mantel really bring the whole thing to life.

artificial fireplace ideas with real logs in use” width=”530″ height=”850″>

Next is a really awesome Genevieve Gorder inspired DIY mantel from Up to Date Interiors.

Art fireplace ideas for your home” width=”601″ height=”848″>

This fake fireplace is another great way to use a real heater and incorporate it into the fireplace. You remember I did that to mine. There’s just something about the warmth that completely changes the feel of the room. What a cozy space this is and the use of a simple mantel and surround along with the heater creates a very nice space.

This next is the perfect example of why and how simple can be best! This fake fireplace by Kristi at Making it in the Mountains actually inspired me to create one of my own for my master bedroom. I will say that our two are completely different, but it wasn’t until I saw hers that I realized that I could actually have a fireplace and mantel in my room, even if I couldn’t have an actual fireplace.

There’s something so beautiful about keeping things simple and letting the lines and design take center stage. I love this DIY fireplace and love the extra character it brings to this space. You really need to watch more to see what I’m talking about.

More Stunning DIY Faux Fireplace Ideas…

Now let’s talk about a totally different approach but so amazing! This Country Design Style reclaimed wood mock fireplace is so cool!

I don’t even know where to start with this DIY faux fireplace. I’m speechless. Using scrap wood to create the designs on the fireplace mantel and pillar takes this faux fireplace surround to the next level! It is wonderful! And it’s so unique that no one will have anything like it. I love love love it!

Another faux fireplace I love is from my friend Deb on Seeking Lavender Lane.

This is a cute fireplace and I love the trim details on the pillars and the faux brick fireplace insert is a timeless look. Definitely one you must see!

Well, this next one from All Things With Purpose takes a fake fireplace to the next level with shelves flanking either side of the fireplace. It also creates an entertainment center.

Fake fireplace ideas with bookshelves flanking the fireplace

What a great room! I love these shelves and how they flank the faux fireplace. It provides an opportunity to display items and balance the fireplace. Can you imagine how you could decorate this room? Gosh, so much fun!

As you can see, creating a faux mantel, inset and surround can be an excellent way to add instant charm to a room. I’ve been thinking about adding one to my dining room… what do you think? I don’t think I’ll let such an adventure stop me. I mean, can you imagine sitting at the dining table with the Christmas stocking on the mantelpiece in the dining room while the freestanding stove blows some warm air towards us as we eat? I now think I can’t eat there until it’s ready.

Each of these DIY faux fireplace ideas I’ve featured today has its own individuality and unique charm. There are so many ways you could do it and I hope these ideas have inspired you in some way. Now is the perfect time to make a project like this one so you can enjoy it during the winter months! Not to mention you could have a pretty spot to hang those stockings!

Another great thing about most of these DIY faux fireplace ideas is that they are not permanent! This means you might be able to move them around if needed or if you move house and want to take them with you. Or maybe you decide you need it on another wall. It’s a lot easier to move a fake chimney than a real one! I hope all of these fake fireplace ideas have given you some inspiration that you can use to create one for your home.

Sometimes it’s as simple as buying a pre-made mantel, adding a cute faux fireplace insert and there you go. Where you take it is entirely up to you, but the possibilities are endless and I think all of these ideas are perfect.

Perhaps you’re looking for a fireplace that you can easily buy and add to a room? Check out these!

Activate your JavaScript to display content

Make sure to pin these DIY faux fireplace ideas for later:

Fake fireplace ideas and make one for your home now!!” width=”512″ height=”1024″>

I hope you enjoyed this post! If you want more inspiration, check out these posts:

Stone Fireplace Surround gets a farmhouse facelift

One Room Challenge – Farmhouse Laundry Room Reveal!

Make simple country style Christmas stockings

I hope you enjoyed this post and I hope that you might want to create a fake fireplace in your home!

Have a great day!

SHELF WIDTH:

The shelf width or mantel width is the widest part of the fireplace. For aesthetic reasons, keep the shelf width as small as possible than the width of the chimney breast. If the room has a flat wall (no chimney breast) then a chimney size one-third the wall dimensions is a reasonable guideline for choosing your preferred size.

HERD:

Normally the hearth width corresponds to the shelf width. Prefab solid fuel fire pits are generally 3 inches high and no less than 18 inches deep and the pit should be fabricated with adequate expansion joints along with the back wall if solid fuels are used. Black granite has proven to be the first choice for stoves and back wall inserts.

INSERT OPENING:

Generally, the measurement is 36″ x 36″, which means an insert or backboard is at least 37″ x 37″. The discount for most units is 3 inches but may be less or more for a minority of designs. Always check the fold dimension before processing.

Firing ports are a matter of choice for each customer but standard ports in manufactured inserts are primarily 16″ and 18″ but larger ports can be discussed. Many cast iron designs limit the opening to 16 inches.

COLOR AND SHADE:

As manufacturers we appreciate the concern for the shade, staining and natural cracks that are all part of a natural material; However, we endeavor to reproduce the product as accurately as possible, but due to the beautiful nature and properties of natural materials, there will almost always be a certain uniqueness to your chosen design.

PROTECTING YOUR CHIMNEY:

After installing your fireplace, wait 4-5 days before lighting a fire. When proceeding to light fires, be sure to temper the marble or granite. To temper the first day, light a small fire (e.g. three briquettes) and let it burn out. On the second day increase the fire by 1 briquette and let it burn out. The next day increase the same, and so on for about 10 to 14 days.

FIRST WATERPROOFING OF GRANITE:

Impregnation (sealing) products penetrate the pores of the stone and make the surface water and oil repellent. The product must be applied on a dry and clean surface. We use the most advanced nanotechnology sealer on the market and all of our installation teams are qualified applicators

DAILY / REGULAR MAINTENANCE:

Most normal household cleaners can leave a greasy smear on the surface of polished granite, sometimes ring marks from glasses etc. can be seen on this greasy layer. We provide a specialist stone cleaner with every installation free of charge.

This cleaner is an excellent ready-to-use product for the daily maintenance of granite countertops. Light dirt and grease are easily removed. Its special ingredient offers extra protection when used in conjunction with the first installation sealing product used to protect against stains and to repel oil and water.

The cleaner preserves the natural appearance of surfaces and hardly affects the color and structure of the surface. It has a pleasant, fresh scent and its fumes are non-hazardous. It is also approved for use in food preparation areas.

GENERAL PRECAUTIONS:

Don’t use knives on your countertop, try using cutting boards to avoid scratching. We will supply you with a cutting board to match your worktop.

Always be careful not to drop large objects onto the stone edge as chipping may occur

Hot pans taken straight off a hob or stove and placed directly on the stone can mark or crack the stone, again placemats are always recommended.

Although the sealer we use is extremely effective, any stone can easily become stained if a substance such as oil or wine is left on its surface for an extended period of time. Always try to wipe up a spill immediately and never leave a spill on for too long a period of time.

Once sealed at installation, the sealer will take approximately 7 days to fully soak into the stone and cure; Special care should be taken during this period. Do not leave oil-based substances on the surface for long periods of time as they can gradually penetrate the stone during this hardening phase.

No matter how well sealed a stone counter is, if oil or anything oil-based is left on the counter for an extended period of time there is a chance of staining. In this case contact McMonagle Marble and Granite. For advice and possible solutions to remove stains. Never leave an acid based product on granite or quartzite for any length of time as it will etch the surface of the stone even when sealed!

We hope you will enjoy your granite worktop for many, many years to come!

If you’re looking to buy a media wall, we’re proud to say you’ve come to the right place. We have a fantastic range of fire/media walls on display from a range of manufacturers giving you different sizes, fuel effects and that all important glass front only, two sided corner or three sided fire in electric, gas or wood.

Media walls are a great space-saving option and add a real feature that can completely transform a characterless space. We can design and build your false chimney breast from start to finish, including any base, sleeve or hearth requirements.

Questions and answers :

What if I have a brick chimney breast but still want a media wall? No problem, we can build in front of your existing chimney breast, this is usually no further forward than an existing standard chimney, so you don’t lose any floor space.

Can I install a three-sided fireplace in my existing brick chimney? Sorry this would not be possible if you knock out the brickwork to see all sides of the fire then the chimney will not be supported.

Where does my Sky/Virgin box fit? Most new boxes work in radio frequency as opposed to infrared, so we can install them neatly hidden behind the TV and out of sight.

Where can I get to my box? When we deliver and install your media wall, we work with a media company to supply a sturdy, swing-out mount so you can easily pull your TV forward if needed.

How long it will take ? The full job from start to finish is usually completed in two days.

What is the lead time for the fires and installation? We normally have electric fireplaces in stock for immediate collection/delivery. For delivery and set-up this can be between 4 and 8 weeks depending on the time of year.

If you have any further questions or would like a price for a specific fire/media wall, please email us via the contact form or via our social media channels which can be found via the links at the top of our homepage.

Please view our media wall gallery and request a quote:

Which chimney niche or fold is required for an electric fireplace surround?

Installing an electric chimney surround on a chimney breast

Installing an electric fireplace on a flat wall

Creative fireplaces can change the chimney fold to accommodate your fire

Perhaps one of the hardest things about buying your electric fireplace is making sure you can install it in your chimney breast cavity or on a flat wall. Electric and insert fires are very much required in the total depth of installation and for this reason there is no specific size of depth of installation, but all electric fireplaces. In most homes, an electric fireplace is installed on an existing chimney breast. In this case, the inner workings of the electric fireplace (often referred to as a fire engine) can be embedded in the chimney. In this case, the optimal solution is a 25mm rabbet that pushes the back panel as close to the wall as possible (25mm recess – 20mm thickness of the back panel = 5mm allowance of the joint to keep the back panel to the wall to glue). chimney breast). If you are installing an electric fireplace on a flat wall with no recess, you will need a larger chimney fold to accommodate the depth insert electric fireplace. The most popular electric fireplaces on the market are manufactured by Dimplex and have on average the required installation depth of 55mm. It is advisable to buy a 75mm chimney surround that will give you enough space for the fire. Some modern electric fireplaces have very realistic flame effects, but to create such an effect they require a very large working mechanism, often 145mm x 165mm deep. In this case, it is possible to purchase a spacer that sits on top of the fireplace fire and hides some of the fireplace’s internal workings. On average most electric fireplaces are capable of accommodating a recess depth of 80mm and therefore you still need a 75mm rebate (found in most traditional fireplace surrounds).

As a direct manufacturer of marble fireplace surrounds, we are able to customize the chimney fold to suit your unique applications or requirements. We are even able to manufacture 160mm recess fireplace surrounds capable of accommodating Dimplex’s deepest Optimist electric fireplaces.

Building permits can be a major obstacle when having modifications made to your property as they can slow down the process. Most people try to avoid obtaining planning permission as it can be costly.

A wood burning stove can be a great addition to any home as it looks beautiful and can provide you with inexpensive and efficient heating, not to mention adding character to your property. You can get wood stoves to heat a single room, such as a bedroom. a living room, while others can provide hot water and central heating for an entire property. Wood stoves can give your home a timeless or modern look, and contrary to what you might think, they’re a lot easier to come by than you might think…

Building permit for wood stoves

The biggest factor stopping people from getting a wood stove in their home is the misunderstanding regarding planning permission. Building permits from your local building authority are usually required to make changes that require extensive building work. In order to have a wood stove installed in your home, the government states that you do not need to obtain planning permission from the Building Inspectorate if these conditions are met:

The chimney is located at the rear or side of the building with a maximum clearance of 1m above the highest part of the roof.

Even if you have building rights, if you are in a listed building or in a designated area, it makes sense to check with your local building authority about installing a chimney. In most cases, no further planning permission is required, but better safe than sorry.

A chimney should not be placed on the main or side wall of any building facing a highway.

So if you’ve been worried about the high cost or hassle of obtaining planning permission to install a wood-burning stove, relax. If this is your first time modifying buildings or you are not sure if your stove is within the limits then don’t panic. One of the best things you can do is speak to and hire a HETAS registered installer from Dorset Stove Installations and they will take care of everything for you. Sit back, relax and dream of sitting in front of your new stove…

Building regulations for wood stoves

The building code differs from the building code. Building regulations state that wood stoves must be approved by your municipality’s building control authority or a HETAS registered installer. It’s so easy to get opted out of by your community, especially since wood stoves are energy efficient.

To make the process as smooth as possible, contact a HETAS registered installer from Dorset Stove Installations as they are certified to install a wood stove in accordance with the regulations and will sign off on the work with the community themselves.

To confirm, here at Dorset Stove Installations we can supply and install your wood stoves as we are HETAS registered installers and can therefore certify all work ourselves.

So do you need planning permission for your stove?

When asked “Do you need a permit to install a wood-burning stove?” In many cases, you do not need a building permit.

Dorset Stove Installations are your local Dorset experts in wood burning stoves. If you need more information about planning permission, we are here to help. Simply call us today on 01202 89 03 21 and speak to a knowledgeable and experienced HETAS registered installer!

We also offer a wide range of fantastic wood-burning stoves in different colors and styles through our online store, which you can browse as you wish.

It is worth paying attention to the rules and regulations for wood-burning and multi-fuel stoves. If you’ve never used or owned a stove, you may not know exactly how hot the stove and flue can get. In normal operation, a smoke tube has a temperature of 150 to 250 degrees Celsius, but it can be much higher. If deposits on the inside of a chimney catch fire, a flue pipe can even glow red (in the worst case and extremely rare). Building regulations must cover all eventualities (including a red-hot pipe) in order to protect property and life. The ground under a stove or in front of the glass can get far too hot to touch and a suitable fire pit is imperative.

A “combustible material” is any material that does not meet fire class A1 or a specification as high as this (your sofa and that wooden beam are definitely combustible materials!). Gypsum board is officially a combustible material. Materials such as “pink plasterboard” may have increased fire resistance, but this does not make them A1 (e.g. rated) fire rating. A1 fire rating means it won’t catch fire, period, and it won’t fall apart in a fire. You are on the safe side with bricks, stones and plaster, as these are NON-combustible materials.

Stud walls may have timber battens behind the plasterboard and in this case normal building codes for combustible regulations should be followed (just because the battens are not visible does not mean they are safe).

gray areas?

At the end of the day, “Who is checking/signing off the job?” is the real question, and it’s these people who need to be kept happy. When in doubt, exercise caution on the belt and braces side.

TOP TIP: To make your job very easy, just make sure there are no combustible materials near your stove.

Further down this page you can see the rules for:

The clearance is determined by the National Fire Protection Agency and testing laboratories.

By using less than the recommended clearance for a wood stove, you can create the perfect conditions for your home to catch fire. It doesn’t take long for a wood stove to reach a temperature of 500 degrees Fahrenheit, at which point the wall behind the stove can start to burn. Because of this, using the correct spacing is extremely important. Manufacturers, the National Fire Protection Agency and the Underwriters Laboratory work together to set the approvals to ensure your wood stove is a safe and enjoyable experience to use.

advertisement

video of the day

Listed and unlisted ovens

A “listed” stove is one that has been tested by an independent laboratory to determine the recommended wall clearance. Most new ovens are listed, and some may even have spacing as small as six inches. These ovens have reduced clearance as they are manufactured with built-in heat shields within the oven body. Ovens that are listed often state this on the data plate on the back of the oven and in the instruction manual. If you have an oven that is 10 years or older, you can bet it’s probably unlisted. However, you can check your owner’s manual and the back of the oven to be sure. Follow the National Fire Protection Agency’s clearance recommendations if your stove is not listed.

advertisement

NFPA standard clearance

The National Fire Protection Association sets standards for wall clearances that are followed by stove manufacturers and most local building codes. The standard spacing recommended by the National Fire Protection Agency is 36 inches. That means the back of the stove should be 36 inches away from combustible materials like woodwork, exposed walls, furniture, and even firewood. The 36-inch recommendation applies to any type of heat-resistant material, e.g. B. 1/4 inch solid board nailed directly to the wall. To measure the distance, just take a tape measure and run it in a straight line from the back of the stove to the wall, even if the stove is in a corner.

advertisement

NFPA Reduced Clearance for Protected Walls

If the wall is protected with some kind of insulation or heat resistant material, the clearance can be less than 36 inches. For example, the National Fire Protection Agency clearance recommendation is reduced to 18 inches if the solid board is attached so that there is a 1 inch air space between the back of the solid board and the wall. The same 18 inch recommendation applies when attaching a piece of 28 gauge sheet metal to the Millboard. However, if you leave 1″ of air space between the sheet and attach it to either a 1/4″ or 1/8″ grinder board, the recommended spacing is reduced to 12″.

advertisement

flue clearance

The standard clearance for a stovepipe is 18 inches from an unprotected ceiling. Follow the 18 inch guideline if you want your oven to meet the 36 inch wall clearance recommendation. You can reduce the stovepipe clearance to 12 inches if you follow the 18 inch wall clearance recommendation; and you can reduce it to 9 inches if you use the 12 inch wall clearance recommendation.

Media walls with fireplaces have become a popular feature in homes across the UK. It’s easy to see why. Not only do they look incredible, but they’re also practical, combining a flat screen TV and an electric fireplace into a single focal point. If you are thinking of creating one in your home then read on and we will tell you how to build a media wall with a fireplace…

Hole in the wall or stud wall?

Before you start grabbing your tools or hiring a builder, you must first make a choice.

Would you like to drill a hole in the wall or build a stud wall for your fireplace?

This choice is often determined by the current decor of your living room.

If you have an existing chimney breast, it’s usually easy to fit an electric fireplace in and install a television on top.

Think of a chimney breast as a prefabricated media wall.

On the other hand, if you live in a newer property, you will most likely need to build a media wall from scratch – this is known as a stud wall option.

For the purposes of this guide, we will show you how to build a media wall from scratch using stud wall.

Choose your media wall fireplace

It is important to decide what type of chimney you want for your media wall. This is because your choice of chimney affects the construction of the wall.

There are two main types of media wall fireplaces to choose from:

hole in the wall media wall fireplaces.

Wall Fireplaces (aka Wall Mounted) Media Wall Fireplaces.

Both types of fire can be used in a stud wall based media wall. They simply have different installation requirements. We’ll cover each of these installation types later in this article.

Below is more information about these two types of media wall fireplaces.

hole in the wall media wall fireplaces

Hole in the Wall media wall fireplaces are some of the most beautiful and attractive fireplaces you can buy.

Because they are recessed into the wall, they create a very smooth, elegant look that is a significant part of the appeal of media walls.

However, since they must be recessed into the wall, you are expected to take this into account during construction. You need to ensure that the stud wall that makes up your media wall has enough room to “tuck in” the fireplace.

With some hole-in-the-wall media wall fireplaces, there is also the option of exposing two or three sides. As the image below shows, this creates a really spectacular focal point in your media wall, but again you need to factor this into your build process.

Wall fireplaces with media wall

The second type of fire you can use with your media wall is a wall mounted media wall fireplace.

As the name suggests, these types of fireplaces sit on the outside of the media wall and attach to it with a bracket or hanging screws.

Wall-hung media wall fireplaces can be just as attractive as in-wall perforated fireplaces, but they lack the same level of slimness and integration with the media wall.

However, it is possible to purchase wall mounted media wall fireplaces that are very slim and almost give the impression of being a hole in the wall.

One of the main advantages of wall fireplaces is that they are not only easy to install but also make building media walls easier.

Shopping now

Guide – To learn more about the types of fires you can use with media walls, read our complete guide to media wall fireplaces.

Choosing your media wall TV

We’re not AV experts here at Direct Fireplaces, so we’ll keep this section short.

When choosing a television for your media wall, you are presented with a similar choice as you would for your fireplace. Would you like your TV to be ’embedded’ in the media wall? Or do you want to hang the TV on the media wall?

Whatever type of TV you choose, you need to take that into account when designing your media wall. For example, embedding your TV in the media wall is a slightly larger task than simply hanging a TV from it, as you need to create a recess for the TV to sit in.

We also strongly recommend checking the weight of your chosen TV. Because stud walls are not load-bearing walls. Therefore, your media wall may not be able to support the weight of a particularly large/heavy TV.

When in doubt – talk to a professional contractor.

The last point to consider is the proximity of the TV to the fireplace. While electric media wall fireplaces do not emit large amounts of heat, it is important that you check the TV manufacturer’s instructions and warranty regarding heat damage.

If in doubt, speak to an AV specialist who can advise you further.

How to build a media wall with a fireplace

When building a media wall from scratch, the first thing you should decide is whether or not you want to do the work yourself.

Building a stud wall requires a fair amount of carpentry skill, while installing the TV and fireplace may require moving outlets – so you’ll need to be confident working with the electrics.

If you have the slightest doubt as to whether you can do the job yourself, in our experience we strongly recommend that you consult a professional contractor. It may cost you a little more, but it could potentially save you some big headaches!

Choosing a location for your media wall

Whether you build your media wall yourself or use a builder, you need to choose a location for it.

Since the media wall will be the main focus of your room – as it houses both the fireplace and the television – most people will want to place it in a central spot, e.g. in the middle of the main wall of the living room.

That’s easy and a reasonable place to put it, but before you commit to the location, think about the depth of the media wall (how much it will stick out from the main wall) and things like viewing angles.

For example, if someone sits on a sofa or armchair next to the media wall, can they watch TV comfortably?

Once you’ve determined that, you should also check whether the wall you’ve chosen has enough outlets and how close they are to the media wall. You need at least two – one for the fire and one for the TV.

If the outlets are some distance from your chosen media wall location, you need to consider that they will be moved in the construction process (most people don’t want long electrical cords running across the main wall of their living room).

Satisfy

The next step is to start measuring.

At this point, the size of the fireplace and the television is what matters most. The wall needs to provide enough support for both of them, so you need to make sure the wall is wide enough to accommodate them safely.

You also need to consider the type of fireplace and television you are installing.

As we mentioned earlier, the type of fireplace and TV you choose will affect the dimensions of your media wall. If you decide to go the elegant “hole in the wall” route, you need to think about the internal dimensions of the cavities where the TV and fireplace will sit.

If you’re going for a wall-mounted fireplace and TV, it’s easier to measure – but pay attention to how far they protrude from the media wall once mounted.

Construction of the stud wall

Once you’ve measured everything, it’s time to start building the stud wall.

A stud wall is a wall constructed from a timber frame. The vertical pieces of wood are the “studs”.

When you hang your TV and fireplace on the wall, it’s the studs that you screw them into.

The cleats are then braced by a series of horizontal pieces of wood. These are designed to add rigidity and strength to the media wall and should not be used to support wall mounted fireplaces or televisions.

If you embed your fireplace and TV in the media wall, you will need to create voids or recesses in the wood studwork to support them.

It is important that you carefully measure the depth of these cavities. You want to make sure that the TV and fireplace sit flush with the outside surface of the media wall after mounting in the cavities.

It is recommended to build these recesses in the same way as the rest of the wall, using studs and load-bearing cross members. Because depending on the model of TV or fireplace, you will have to put brackets in the recesses to support and mount the devices.

Installing the TV and Fireplace (Embedded)

If you are installing your TV and fireplace in wall-mounted configurations, skip this section. We will cover wall mounted installations later in this article.

Once the base frame and outline of your stud wall is complete, the next step is to mount the TV and fireplace (if you plan to embed them in the wall).

In most cases, you will need to attach mounting brackets to support the devices. This is usually a simple job and involves drilling into the studs in the recesses.

With the brackets attached, all you have to do is hang the fireplace and TV on it.

If you measured correctly, the TV and fireplace should now be flush with the outside surface of the media wall.

The electrics

As previously mentioned, it is important that you give some thought to the location of the outlets you will need in relation to the location of the media wall.

You need at least two sockets (one for the fire and one for the TV).

The next steps depend on your personal preferences.

Some people choose to place the outlets right next to the media wall. You will use nail-in wire clips to route the power cords from each device along the inside of the stud wall frame, with the connectors protruding outside the frame near the bottom of the media wall.

This option means you can unplug the TV and fireplace if you wish – but the plugs remain visible (albeit discreetly).

The other alternative is to place the outlets in the media wall itself (either by placing the media wall over existing outlets or by moving outlets around).

Here, too, the cables of the devices can be routed with cable clips along the stud frame to the sockets. This option means the sockets are completely invisible – but it means you have to leave the TV and fireplace plugged in permanently.

Note – For any electrical work such as rewiring or moving outlets, we strongly recommend that you always have a qualified electrician carry out the work.

Covering and completing your media wall

With the main wood frame of your media wall complete and your fireplace and TV installed, it’s time to add the finishing touches.

If you want to give your media wall a smooth finish and ensure it blends in with the other walls in your living room, we recommend using plasterboard to cover the wooden frame.

Plasterboard is available in pre-cut sheets, with a standard sheet of plasterboard measuring 2400 x 1200 x 9mm and costing around £8-10.

Installation is not complex work, as it is cut to the required size and screwed with a drill. Remember to drill in the studs (the vertical pieces of wood) and not the horizontal sections of the wood frame.

Once all of the plasterboard is attached and your media wall is completely covered, the next step is to smooth out the plasterboard.

Painting over the plasterboard will help hide the screws that were used to secure the plasterboard in place. It will also create a nice smooth surface perfect for painting.

If you don’t feel confident in your skimming skills, contact your local plasterer who can do the job for you.

Once this has dried, give your wall a new coat of paint and you can enjoy your new media wall and fireplace!

Installing the TV and Fireplace (Wall Mounted)

If you are installing your TV and fireplace in a wall-mounted configuration, you should do so at this stage (once the skimmed layer has dried on the plasterboard).

While each TV and fireplace model is slightly different, they are generally mounted to a wall in one of two ways:

With a wall bracket that is screwed into the wall.

With special suspension screws that are screwed into the wall.

As you can see, these two installation methods are very similar. Both focus on screwing into the wall.

When driving screws into your new media wall, it is important that you screw directly into the studs. If you miss the nubs, you’ll end up drilling an unsightly hole in the center of the plasterboard…

To avoid this, use a pen finder tool. This is a handy device to have over the wall. It will beep or warn you once it has found a bolt.

However, before you reach for your drill, you should carefully measure (with a tape measure and spirit level) and mark where you will be placing your fireplace and TV.

Some wall fireplaces come with templates to help you with this.

You also need to think about how to wire your fireplace and television and connect them to your outlets.

Sockets can be attached to stud walls. So one possibility would be to install new sockets directly behind the television and fireplace. This way the plugs will not be visible. To do this, you need a special socket outlet that is designed for use in stud walls.

As always, if you have any doubts about dealing with electricity, call for professional help!

Instructions – for even more information on installing a wall mounted electric fireplace, read our full instructions here.

The finishing touch

Once you’ve followed these steps, your media wall is pretty much done!

However, there are a few finishing touches you might want to add. For example, some people may want to add a baseboard to the bottom of their media wall – so that it abuts the baseboard in the rest of the room.

Others prefer to leave it out, which makes the media wall stand out from the rest of the room.

If you’re really into AV and tech, you can add more features to your media wall, such as: B. Loudspeakers.

Ultimately it’s up to you!

The best electric fireplaces for media walls

As you can see, creating a media wall with a fireplace in your home is not the most difficult task in the world.

Sure, it requires some construction skills and knowledge, but the results are more than worth it.

A media wall not only creates a stunning focal point in your living room, it can even add to the overall value of your home.

So, do you want to create a media wall in your home? Then below we have listed some of the best wall mounted and hole in wall electric fireplaces for media walls.

The Best Wall Mounted Electric Fireplaces for Media Walls

If you’re going the wall-mounted (aka wall-hanging) route for your media wall, the electric fires below are perfect.

Celsi Electriflame VR Basilica Electric wall fireplace

Shopping now

If you want an elegant, sleek wall-mounted electric fireplace that appears as if it’s seamlessly embedded into your media wall, then choose the Celsi Electriflame VR Basilica.

This wall mounted electric fire has a truly stunning look and is available in either satin champagne or satin silver and features Celsi’s really clever E-VR flame projection technology.

This VR technology is able to create an incredibly realistic flame effect which, combined with the realistic silver birch wood fire bed, effortlessly makes your space feel comfortable and warm.

OER Alpine electric wall fireplace

Shopping now

Do you want the fire on your media wall to stand out and become a focal point in its own right? Then something like Alpine by OER would be an ideal choice.

The Alpine will certainly make a bold addition to a media wall – and thanks to its design it offers a shelf on which to store small items such as lightweight speakers or remote controls for your media wall TV.

The OER Alpine adds a real touch of quality to your media wall as it is made from real natural materials such as natural oak, porcelain and more.

It also has a three-sided fire, so it adds an extra layer of depth and interest to your media wall. It’s also easy to install with the required mounting brackets that are included.

The best electric fireplaces for media walls

Do you want to create a truly elegant media wall with an integrated fireplace and TV? In this case you want a hole in the electric fire pit on the wall.

These electric fireplaces are designed to sit in a recess in media walls and sit flush with the face of the wall. This creates a sleek, sleek appearance that many people really like.

Below are some of our most popular media wall electric wall fireplaces.

Flare Avella Grande Hole in the Wall Electric Fire

Shopping now

To create a truly sleek, modern-looking media wall, choose the Flare Avella Grande Hole-in-the-Wall Electric Fireplace.

Using the latest in LED technology, the Avella Grande can mimic the shimmering, smoldering effects of a natural flame with an incredible level of realism.

At 45 inches wide, the Avella Grande lives up to its name.

It is ideal for media walls with a large widescreen TV. Sometimes it can be difficult to find a media wall fireplace that matches the grandest televisions – but that’s no problem for the Avella Grande.

The Avella Grande is available in either black nickel or matte black, making it easy to choose the color that complements your media wall and TV.

With thermostat controls and the ability to view flames on the LED screen with or without the heater running, the Avella Grande is also an extremely flexible home heating option.

AGA Rayburn Stratus 100 Extra Slim Hole in the Wall Electric Fireplace

Shopping now

If you are building a media wall with a very shallow depth, you should opt for a media wall fireplace like the AGA Rayburn Stratus 100.

The Stratus 100 has a depth of just 130mm, meaning it will fit into even the narrowest of media walls.

Despite being extra slim, the Stratus is still a bold and eye-catching media wall fireplace, largely thanks to its wide screen front. To add another element of interest, the flames can be changed to multiple colors. In combination with the crystal fire bed, a beautifully shimmering fire effect is created.

The Stratus also has a heating capacity of 1.9kW, which is enough to take the chill out of a room without posing a risk of a TV accidentally mounted above it.

At Direct Fireplaces, we’re here to help!

We understand that when investing in a new fireplace and media wall, you may have a few questions before diving into the project.

And we’re happy to help!

Our team has decades of experience advising clients on all types of fireplace projects. As the UK Authority for media wall fireplaces, we are happy to provide free information and advice before you buy.

Simply contact us on 0161 516 2395 or email [email protected] and our team will be happy to help!

The home of the media wall fires

Direct Fireplaces is the UK’s leading retailer of media wall fireplaces. If you’re looking to select the very best fire for your media wall, explore our huge range today.

Aside from being home to media wall fires, we’re also home to great perks such as: B. Free UK mainland delivery, 14 day hassle free returns and competitive financing options.

If you want the very best Media Wall Fireplace, buy it from Direct Fireplaces!

Buy media wall fireplaces from Direct Fireplaces now

For more installation instructions, buying guides and information, visit the Direct Fireplaces blog…

How to Create the Perfect Media Wall with a Fireplace | What types of fire can you use in a media wall? | Introducing Media Wall electric fireplaces and Hole in the Wall electric fireplaces

If you’re looking to buy a media wall, we’re proud to say you’ve come to the right place. We have a fantastic range of fire/media walls on display from a range of manufacturers giving you different sizes, fuel effects and that all important glass front only, two sided corner or three sided fire in electric, gas or wood.

Media walls are a great space-saving option and add a real feature that can completely transform a characterless space. We can design and build your false chimney breast from start to finish, including any base, sleeve or hearth requirements.

Questions and answers :

What if I have a brick chimney breast but still want a media wall? No problem, we can build in front of your existing chimney breast, this is usually no further forward than an existing standard chimney, so you don’t lose any floor space.

Can I install a three-sided fireplace in my existing brick chimney? Sorry this would not be possible if you knock out the brickwork to see all sides of the fire then the chimney will not be supported.

Where does my Sky/Virgin box fit? Most new boxes work in radio frequency as opposed to infrared, so we can install them neatly hidden behind the TV and out of sight.

Where can I get to my box? When we deliver and install your media wall, we work with a media company to supply a sturdy, swing-out mount so you can easily pull your TV forward if needed.

How long it will take ? The full job from start to finish is usually completed in two days.

What is the lead time for the fires and installation? We normally have electric fireplaces in stock for immediate collection/delivery. For delivery and set-up this can be between 4 and 8 weeks depending on the time of year.

If you have any further questions or would like a price for a specific fire/media wall, please email us via the contact form or via our social media channels which can be found via the links at the top of our homepage.

Please view our media wall gallery and request a quote:

I am planning to mount my TV on a chimney breast. I want to know if it can stand the waiting time of the 50 inch plasma tv. Also, I would like to know if there are special screws, anchors, etc. to help hold the TV in place if I can mount it.

PS: I bought the wall mount from Amazon and it came with all the necessary long screws and anchors. I connected the TV to the fireplace and am very happy with it. Thank you for your help.