Are you looking for an answer to the topic “bungee cord for pop up camper“? We answer all your questions at the website https://chewathai27.com/ppa in category: Top 474 tips update new. You will find the answer right below.
Table of Contents
Is shock cord the same as bungee cord?
Bungee cord, shock cord, and elasticated cord are three names that are used interchangeably, to describe a cord with a stretchy rubber core and a braided outer sheath. In fact, all of the bungee cords available on our site are actually listed as shock cords, because they’re exactly the same thing!
Are shock cords elastic?
A bungee cord (sometimes spelled bungle; also known as a shock cord) is an elastic cord composed of one or more elastic strands forming a core, usually covered in a woven cotton or polypropylene sheath.
Bungee Cord Replacement Kit (27″)
A bungee cord (sometimes spelled bungle; also known as a shock cord) is an elastic cord composed of one or more elastic strands forming a core that is usually covered with a woven cotton or polypropylene sheath. The sheath does not materially elastically stretch, but is braided with its strands spiraling around the core so that longitudinal tension causes it to compress the core and transmit the elastic compression of the core to the length of the sheath and cord. Special bungees, such as those used in bungee jumping, can be made entirely of elastic cords.
Used[edit]
A child on a bungee cord device in Moscow, Russia
Bungee cords were used to provide lightweight suspension for pre-WW1 aircraft landing gear and are still used on many small homebuilt aircraft where weight remains critical.[1] Bungee cords were also used in skydiving to aid in opening the old parachute container after the ripcord was pulled.
Today, bungee cords are most commonly used to secure items without tying knots and to absorb shock. Inexpensive bungee cords with metal or plastic hooks on each end are marketed as general-purpose items. In Australia this shape is known as an octopus or “occy”, strap or as a jockey strap. This can be a single strap or a set of four hook straps held together by a metal ring, allowing the Occy strap to secure objects around various attachment points, e.g. B. a suitcase on a car roof rack. Extensions to the concept are available as a coarse mesh of bungee cords with metal or plastic hooks around the perimeter to secure irregularly shaped luggage and cargo loads to the back of pickup trucks, car roofs, etc.
Bungee cords have also been used to make bungee chairs[2] and for other purposes.
Etymology[ edit ]
The origin of the name “Bungee”, “Bungie” or “Bungy” is uncertain. The Oxford English Dictionary records the use of the phrase in 1938 for launching gliders with an elastic cord.
Dangers[ edit ]
Bungee cords are a leading cause of eye injuries, and some doctors suggest not using them.[5][6]
What can I use instead of a bungee cord?
Wraptie is a more convenient and versatile alternative to bungee cords and other tie down straps. Instead of a simple elastic rope and a hook, Wraptie is peppered with hook-and-loop straps along its length.
Bungee Cord Replacement Kit (27″)
Tools | October 28, 2017
Wraptie is a more convenient and versatile alternative to bungee cords and other tie-down straps. Instead of a simple elastic rope and hook, Wraptie is studded with Velcro straps along its length. It’s a breeze to customize, extend, and save.
Crowdfunding projects pose some risk for buyers, so make sure you do your research and read the seller’s detailed description and production schedules fully before spending your hard-earned money.
How much weight can bungee cords hold?
Bungee Cord – Shock Cord
Shock cord, commonly known as bungee cord, is available in a variety of diameters ranging from 1/8 inch with a tensile strength of 100 pounds to 1/2 inch with a tensile strength 450 pounds.
Bungee Cord Replacement Kit (27″)
How do I keep my pop up tent from blowing away?
In addition to using tent stakes, try attaching sandbags or weights to the legs of your canopy. Canopy sandbags can be filled with a material like sand or pebbles and provide additional weight to help your canopy resist the wind.
Bungee Cord Replacement Kit (27″)
How much wind can a pop up canopy take?
Although the amount of wind that a pop up canopy can withstand varies by make and model, in general most pop up canopies can withstand up to 50km/h of wind (provided they are properly fitted and anchored) . For perspective, according to an article from the National Weather Service, a lightly windy day can experience winds of 0 to 12 MPH, while a moderately windy day can get winds of 13 to 30 MPH. Before deciding to use your pop up canopy, check the weather forecast to ensure wind speeds will remain below 30 MPH. If it will be windier, choose another day to set up your canopy.
8 tips to secure your canopy against the wind
Tip #1 Choose a sturdy construction
When choosing a pop-up roof, the right materials can make all the difference. A pop-up roof made from a strong material like steel or fiberglass will withstand wind better than one made from aluminum.
Tip #2 Choose a canopy with a vented top
Another useful feature to look for when choosing a pop up canopy is a vented canopy screen. This type of umbrella features a design hole in the top of the umbrella that allows air to escape from the roof of the canopy in windy conditions. Canopies without this feature can fill with air on windy days, which can cause them to lift off the ground.
Tip #3 Find the right location
When setting up your pop up canopy, try to find a spot that gets the least wind. Look for an area partially sheltered by trees or structures, and be aware of the wind direction. You also need to consider the terrain. The ideal location is one that has a level, firm ground so you can use stakes to properly anchor the pop up canopy. Avoid areas with wet soil.
Tip #4 Read the instructions carefully
It is always important to read the assembly instructions before setting up your pop-up roof. Failure to erect your canopy in accordance with the supplier’s instructions may compromise the structural integrity of the pop up canopy. Always use the recommended tools and ensure you have the correct number of people required to help erect the canopy.
Tip #5 Anchor your canopy
Once your canopy is assembled, use ropes and stakes to securely anchor your pop up canopy where possible. Many canopies include stakes with the pop up tent, but if you must purchase them separately, look for durable steel stakes with a hooked head so you can attach the rope to them more firmly.
Using the right knot can also help. According to a Rolling Fox article, one of the best knots for securing a tent is called a guy rope knot. This type of knot allows for optimal line tension while keeping the rope securely attached to the stake.
Attach the ropes to each corner of the canopy screen and secure them deep in the ground with stakes. Many canopies also have feet with holes where additional posts can be placed. If it’s a windy day, more is better.
Tip #6 Use weights
In addition to tent pegs, try attaching sandbags or weights to the legs of your canopy. Canopy sandbags can be filled with a material such as sand or pebbles and provide additional weight to help your canopy withstand the wind. Weights are a must if you intend to use your pop up canopy on asphalt or concrete and cannot use pegs to secure your canopy off-road. If you don’t have access to real canopy weights, try filling an old pillowcase with sand and attaching it securely to the canopy’s leg.
Tip #7 Remove the side panels
Certain types of canopies have side walls, and while they provide additional privacy and refreshing shade, they can also make your canopy more vulnerable to strong winds. Once the wind enters through the hinged canopy opening, the side panels can catch the wind like a sail, causing your canopy to slide across the ground or tip over. If possible, remove all side panels until the wind has passed, or save for a sunny, windless day.
Tip #8 When All Else Fails… Take It Off
Some days are just too windy to use a pop up canopy tent. If you’ve tried all of the previous tips and are still having trouble pitching your tent properly, there’s no shame in packing up your tent, especially when you’re surrounded by other people. Remember, the only thing worse than having your awning blown off is someone else’s awning flying through your picnic or outing.
Hold onto your pop up canopy and enjoy your time outdoors
A little wind doesn’t necessarily mean you have to cancel your outdoor canopy time. With a few precautions and taking the time to set up your pop up canopy properly, you can enjoy your time under your canopy despite the wind. Just be prepared to move and pack your canopy when a refreshing breeze turns into a powerful gust.
How do pop up camper cables work?
The cable system operates on a single winch. The winch sits on the front and controls a separate cable for each corner of the trailer. Cranking the winch handle pulls the cable through the pulleys and lifts a rod on each corner. The rods lift and hold the roof in the raised position.
Bungee Cord Replacement Kit (27″)
Raise the roof manually with two or more people. At each corner, place 2 x 4 pieces of wood between the frame and the roof. Use at least six pieces of wood to keep the roof upright. The roof elevation is necessary to gain access to the internal cables, rails and pulleys.
Enter the RV and locate the access panels along the floor. Using a screwdriver, pry the panels off the wall to reveal the track and rollers. Also remove the large panel to expose the winch spool and distributor block. Use a screwdriver to remove the plate screws covering the winch.
Check the main cable that runs from the winch spool to the distribution block. If damaged, use cable cutters to remove cable from winch and distribution block. Measure the length of the cable and cut a new cable to match the length. Wrap the new cable around the winch to form a loop. Wrap a cable clamp around the loop and smash the clamp with pliers. Repeat the process around the manifold block loop.
Choose one of the secondary wires that connects to an eyebolt on the distribution block. Use wire cutters to cut the cable from the eyebolt. Follow the cable through the rail until you reach the termination point on the drive slug. Memorize the route through the pulleys and cut the cable from the drive screw. Remove the cable from the rail and cut a new cable to fit the length.
Wrap one end of the new cable around the eyebolt to form a loop. Slip a clamp over the loop and smash the clamp to make the connection. Thread the other end of the cable through the track and around the pulleys until you reach the push rod. Thread the end through the push rod eyelet and form a loop. Slide a clip over the loop and smash the clip with pliers to complete the cable replacement. Repeat the process for each of the remaining three cables.
Test the winch to ensure the cables are raising and lowering the roof properly.
Items you will need Screwdrivers
New cables
wire cutter
cable crimps
Tongs
Tips Examine the pulleys while the chain system is exposed. Replace bent and broken pulleys that can jam the cable during lifting.
How do you hold a pop up tent down?
There are two basic options when it comes to securing your canopy tent; anchors or weights. Anchors attach to the tent’s canopy and get staked into the ground, whereas weights simply hold down and secure the canopy with their weight alone and do not have to be staked into the ground.
Bungee Cord Replacement Kit (27″)
Tent anchors vs. tent weights
There are two basic options when it comes to securing your canopy tent; anchors or weights. Anchors attach to the tent’s canopy and drive into the ground, while weights simply hold and secure the canopy with their weight and do not need to be driven into the ground.
The main difference between tent anchors and tent weights is versatility. Tent anchors need to be stuck into the ground, which makes their use impossible when you set up your canopy tent in an outdoor location with concrete or a place where it is not possible to stick it into the ground. It’s important to contact your venue in advance, whether it’s for a festival, outdoor market or trade show, and ask about the area where your tent will be pitched.
Tent weights, on the other hand, are a versatile option that can work anywhere and for any budget. Not only can you buy convenient, size-efficient commercial tent weights, you can also make your own at minimal cost. The main disadvantage of tent weights is, well, weight. With the recommendation of providing at least a 40 pound weight on each tent leg to secure a small 10×10 tent, there is additional work and planning involved in transporting and setting up tent weights compared to tent anchors.
So what’s the best way to weight your canopy tent: anchored or weighted? If you’re going somewhere that you can’t stake into the ground, you’ll undoubtedly need tent weights. They’re also an inexpensive, easy option that works in high winds and rain. We recommend choosing tent anchors when you want easier setup and transport of your event tent without having to pack and lug around several heavy tent weights.
Types of tent weights
concrete blocks
Concrete blocks are an inexpensive option that can be used to secure your tent and are generally fairly easy to transport and set up. They don’t look great, but for a trade show event where people are looking at the inside of your tent and not the outside, cinder blocks are a perfect way to secure your tent.
sandbags
Sandbags are the ultimate tent weight when it comes to disaster relief and have been used for decades to provide quick and permanent security for temporary shelters in times of need. They can be used in extreme weather and can be fairly cheap, but if you expect to use them multiple times and expect them to rain, make sure you invest in quality, weatherproof sandbags.
water weights
Water weights like American Tent’s Giffy Ballasts can be purchased online and may solve the transportation problem that some tent weights cause. They stack well and are easy to transport and anchor. This means if you have access to water at your venue, you can bring virtually weightless plastic boxes that become weights when filled with water.
weight plates
Weight plates are similar to water weights and can come pre-filled with sand or other weighted material, or empty for you to fill the weights at your venue or with your own weight material. They can be attached to your tent frame and blend in well with the overall look of the tent.
Homemade canopy weights vs. store-bought weights
If you are trying to save some money on securing your event tent, there are several options that will work to keep your tent safe in high winds. While there are various methods on how to make your own canopy tent weights, it’s important to make sure you choose an effective method.
Two of the most popular and effective canopy weights you can make yourself are weights made from buckets filled with water or sand, or PVC pipes filled with concrete. The buckets will work in a pinch, especially if you’re setting up an emergency aid tent in a remote location, but you’ll probably want to fill PVC pipes if you’re having a more eloquent event so your guests aren’t staring at ugly buckets on the corners of your event tent .
How to make tent weights at home
Whether you’re looking to save money or just want an easy-to-transport or customizable tent weight option, here are two methods you can use to make our own tent weights.
To make your own bucket tent weights, simply invest in no fewer than four high-quality buckets that can be filled with either sand or water. If you plan on leaving your buckets empty and filling them on site, we strongly recommend that you test-fill the buckets beforehand to ensure you bring more than enough sand and access to enough water to keep them by the end of the day correct weight to fill. Buckets can also be filled with concrete, but this means they are not as easy to empty and transport.
To make PVC tent weights, you simply need 4 PVC pipes long enough to hold 40 pounds of concrete, or any number of lighter weight PVC pipes equal to the weight you need to secure your tent . PVC weights can be easier to transport if made smaller, typically take up less space than buckets and can easily be attached to the tent legs where they blend seamlessly.
Is it a good idea to make your own tent weights?
Even if you can make a canopy tent safe with homemade weights, you should double-check your work, do a test run in the wind and make sure your weights are adequately securing your event tent! The safety of your guests is paramount and a levitating tent in high wind speeds can pose a very real threat at an outdoor event. If you have event insurance or rent a space at your own venue, make sure you understand the requirements for securing your tent.
Tent Ballasting Guidelines
It is very easy to determine how much weight you need for your canopy tent. American tent manufacturers recommend 40 lbs on each leg for a small 10×10 tent. Anything larger and the number doubles. Easy!
If you have invested in event insurance we strongly recommend that you follow the manufacturer’s recommendations for the weight you are securing your tent with as you can run into problems if an accident happens and you have not used the right amount of weight. However, when visiting farmers’ markets, craft fairs, and other similar events, the required tent weight is usually lower than the manufacturer’s recommendations. Here are tent weight recommendations to help you determine how much weight is required to hold down a tent for your event.
Product Type Manufacturer Recommended Weight Farmer & Craft Show Weight Requirements 10 x 10 Tent 40 lbs 24 lbs Larger than 10 x 10 Tent 80 lbs 48 lbs Umbrella 50 lbs 40 lbs
Conclusion
Properly securing your outdoor event tent can mean the difference between a memorable experience for you and your guests and a complete disaster. Luckily, there are different tent weight options to ensure your tent provides effective protection from harsh conditions. At American Tent, we pride ourselves on assisting our customers with all aspects of ordering and operating our event tent products. If you have any further questions about how to properly secure your event tent, give our team a call – we’re happy to help!
What is a shock cord used for?
They are used in the making of headbands, lanyards, or signs for decorating a classroom, dorm room, or living space. There are also smaller shock cords, but larger shock cords can be used for tying down tarps, tents, and objects in the bed of a trailer or truck.
Bungee Cord Replacement Kit (27″)
Close Contact Company Please fill out the form below to send a quote request to any of the companies listed below
Close Bring your business to this Power Page
Introduction This article takes an in-depth look at shock cords, bungee cords, and elastic cords. The article provides more details on topics such as: what are bungee cords, shock cords, and elastic cords?
Types of bungee cords, shock cords, and elastic cords
Uses and benefits of bungee cords, shock cords, and elastic cords
And much more…
Chapter 1: What are Bungee Cords, Shock Cords and Elastic Cords
This chapter covers bungee cords, bungee cords, elastic cords, and how to make them.
What is a bungee cord?
A bungee cord is a rope made up of two or more elastic strands covered with a woven fabric. It has hooks attached to both ends. A bungee cord is also known as a shock cord and elastic cord.
Usually the elastic material is rubber and is bound by a fabric cover. Being elastic in nature, bungee cord is used in a variety of applications. It is commonly used to tie down luggage to the outside of the vehicle.
Manufacture of bungee cords
The elastic strands of the bungee cord are made of rubber and can be natural, synthetic, or even a combination of both. It all depends on the use of a bungee cord. The outer woven cover can be made from any material such as polypropylene, cotton or nylon. These materials help protect the outer jacket and add extra stretch to the cable.
Raw materials used in bungee cord manufacture
The raw material used to make a bungee cord is rubber, either synthetic or natural. Natural rubber, also known as latex rubber, is typically a good choice as it has good tensile strength and exceptional ductility. It also has the ability to return to its original form. These properties make natural rubber an excellent material for bungee cords. Latex rubber has minimal resistance to sunlight and air. This means that ultraviolet radiation can damage natural rubber.
On the other hand, synthetic rubber has better resistance to sunlight and air. But synthetic rubber like neoprene shows lower tensile strength and flexibility than natural rubber. For these reasons, natural rubber is mostly used for military purposes. Natural rubber is also used in bungee jumping.
The bungee cord’s sheath is a fabric sheath made of cotton or nylon yarn. This yarn is braided in construction. The coating of the fabric varies and depends on the intended use of the rope. Commercially used bungee cords have a single layer of nylon. A single nylon layer offers more abrasion resistance and also has high tensile strength. However, when the bungee cord is used for military purposes and bungee jumping, it has a double-layer cotton cover. Some specially designed bungee cords have a natural rubber coating and this is braided in construction.
Bungee cord design
The design of the bungee cord is determined by its application. A diameter of 0.25″ to 0.62″ is available for standard bungee cords. A diameter of 0.25 inch to 0.87 inch is available for military use. The bungee cord used for jumping purposes is 0.62 inch in diameter.
Bungee cord stretching
Bungee cords are designed to stretch to specific lengths with a specific amount of stretch. The elongation of the bungee cord is determined by comparing it to the length of the unstretched length. For example, if a bungee cord can stretch to twice its original length, it is said to have stretched 100%.
Manufacturing process of bungee cords
The process of making bungee cord has the following steps:
Extruding rubber bands
The first step in the manufacturing process is the extraction of natural or synthetic rubber. The rubber is then formed into long ribbons. The dimensions of the elastic are 0.09 inch to 0.12 inch thick, 0.25 inch wide and up to 100 feet long. The rubber is then fed into the extruder, which consists of a heated barrel. There are two ends in the extruder, from one end of the barrel the rubber moves under pressure and is pushed out through the other small hole of the extruder. The hole from which the pressed rubber is pushed out has the desired shape. After that, the cooling process is completed and the rubber is shipped to the manufacturers.
Prepare rubber bands
The tensile strength and diameter of bungee cord are determined by the number of strands and ribbons that are laid in the cord. For the braiding process, these strands are evenly unwound from the spools. Sometimes due to the hot weather, there are certain chances that the strands will stick together. To avoid such circumstances, these rubber strands are coated with finely powdered talc or soapstone. This coating process is continuous and ends at the end of the unwinding process.
braiding the cover
The next step is braiding the elastic strands. This process is done in a machine called a braiding machine. The free ends of the rubber strands are manually inserted into the braiding machine. During the running-in, these elastic strands are gently squeezed with the help of rollers and other devices that are inserted into the braiding machine. At the exit end is another spool or take-up spool that pulls the strands through the machine.
Adjusted speed and pressure keep the rubber strands under tension and slightly stretched. This stretch and tension helps reduce the diameter of the elastic strands and allows the fabric cover to wrap tightly. The braider weaves the yarn onto the stretched strand of elastic, covering the elastic as it runs through the machine. The sheathing must be tightly woven so that no dirt can get into the thread gaps when the cord is fully pulled out. If two or more wraps of yarn are required, this is done sequentially. The outer yarn covering can be dyed or color coded according to customer requirements.
shipping bungee cord
When the bungee cord is made, it is ready to ship. The cord is cut to the required length, wound up and then placed in a cardboard box. These cables are also placed in dark plastic bags to protect them from sunlight, air and UV rays.
Attachment of end fittings
The manufacturer does not attach the bungee cord end fittings. The end fittings are designed according to requirements. For bungee cords used to tie down luggage and gear, it is first cut to the required length. After cutting, both ends of the cord are doubled and coiled with a stiff wire. A wire coiling machine takes care of this winding. Once wrapped, a J-shaped hook is attached to the end to secure it. In bungee cords used for jumping, a taut cord is tightly wrapped with strong and waxed cord known as whips. The ends of the bungee cord are looped around a non-metallic eyelet. Some other ends consist of sewing the cord to the woven fabric band.
Quality Control of Bungee Cord
The quality control of bungee cords depends on the following factors, which should be checked against:
Visual inspection
Visual inspection of the cable means looking for clearly visible faults in the cable, such as: B. Rubber defect, wrong color, gaps in a woven cover or broken cable.
bungee testing
Testing the bungee cord is very important to know its tensile strength, load capacity and elongation rate. This should be done for all types of bungee cords, either commercial or military. These factors can easily be checked by placing loads on the cord.
Color coding and lettering
Some companies make their own bungee cords and color them accordingly. But the bungee cords used by the military have specific colors, and those colors show their date of manufacture. These cables lose efficiency as they age and it is recommended that these cables be shipped within six months of their manufacture. Some colors like green, yellow, red and blue are given to the cord according to their date of manufacture and are now being revised with some changes. However, it is believed that the colors of commercially available bungee cords are for decorative purposes only.
What is a shock cord?
A bungee cord is a cord composed of a high quality rubber core and polyester cover, making it compact, durable and strong. Shock cords are useful for many different uses including tying tools to your harness and tying down gear.
The polyester material that makes up the outer shell of the rubber cords is extremely abrasion resistant, which fully protects the inner rubber core. Shock cords are similar to bungee cords in almost every way, except that bungee cords usually come with a bungee cord hook. A shock rope can also be used in the military field to absorb shock from large cargo, parachuting and bungee jumping.
Shock Cable Properties
Characteristics of shock codes include:
Shock Cords have a multipurpose line perfect for stringing or tying down accessories.
They are great for tying.
They are a perfect way to keep personal items off the floor.
They consist of a high-quality rubber core environment.
They have a protective cover made of 100% polyester.
They are very stretchy and made for situations where stretch and elastic properties are required.
Shock cords are small and light.
They are not typically used in life safety applications.
Shock cords are not intended or certified for use in jumping, climbing, or rappelling.
What is an elastic cord?
Elastic cords are smaller cords with a smaller diameter compared to shock/bungee cords. They are best used for smaller crafts that involve making jewelry such as necklaces and bracelets. They are used to make headbands, lanyards or tags to decorate a classroom, dorm room or living space.
Smaller elastic cords also exist, but larger elastic cords can be used to tie down tarps, tents, and items in the bed of a trailer or truck. Depending on the load and the height of the goods to be transported, a rubber rope may not be suitable for securing the load. Both bungee cords and elastic cords can be used in numerous DIY projects such as: B. for organizing utensils in the kitchen, bundling toys, and keeping things in one fixed place like a bike in a garage.
Differences between elastic and shock cords
Elastic cords can be similar to shock cords in terms of the materials they are made of, but shock cords have longer stretches or stretches than elastic cords. The typical elongation of a bungee cord is 100% or it can stretch to twice its original length, while the typical elongation of elastic cords is 50% or they can stretch to one and a half times their original length.
Chapter 2: Types of bungee cords, bungee cords, and elastic cords
This chapter discusses the different types of bungee cords, bungee cords, and bungee cords.
Types of Bungee Cords and Shock Cords
Types of bungee cords also categorized as shock cords include:
Adjustable bungee cords
These types of bungee cords have lengths that can be modified based on application needs. They typically have a maximum length of 32 inches (including the hook) and can be adjusted to a length of 10 inches. They offer flexibility for household and light work.
Adjustable bungee cords have lower tension compared to high-performance cords, allowing them to be easily stretched to accommodate a variety of tasks. Each cord is 8mm thick with a hook at both ends. The hooks are made of metal and are covered with an anti-scratch coating that protects them from scratches. These types of bungee cords are affordable and useful picks for everyday tasks. Duties include household storage, securing gear and hiking backpack.
Marine grade shock cords with hooks
These types of bungee cords are made to withstand harsh conditions. The sheathing of the cord consists of high-quality Dacron polyester sheathing.
This coat is resistant to UV rays, moisture, oils, chemicals and abrasion. This Dacron polyester is a synthetic fiber with low stretch and high strength. This jacket allows the cable to perform well during prolonged outdoor use. The safety standards are met by this cable.
mini bungee cord
The rubber core of this type of bungee cord is high quality and durable. The woven outer shell is UV resistant to withstand outdoor conditions and repeated use. They are usually available in 10 inch lengths with dichromated steel hooks that resist warping under tension. The cords are available in a wide range of bright and eye-catching colors.
They combine visibility and utility to suit a variety of household chores. They are used around the home for everyday tasks like securing, organizing and other small tasks. Indoors they are used for storage like organizing a workshop or garage. Because the bungee cords can withstand UV rays, they can be used outdoors to secure a tarp, camping, and many other uses.
Super Duty Shock Cord with carabiner
These types of bungee cords feature two steel snap hooks that have a wide-mouth design. They are much stronger compared to traditional bungee cord hooks and make secure attachments.
Once attached, the hook and latches are held in place by the spring-loaded latch. This prevents accidental release of the hooks, making this bungee cord an extra safe pickaxe. The base of the hook features a molded handle that increases strength and safety for the user. These types of bungee cords come in 48 inch lengths and are designed to withstand UV rays and weather damage. They are made of high quality rubber that remains elastic for repeated use. These types of bungee cords are used for home, recreational, and work use when a reliable hook is required.
Heavy duty bungee cords with hooks
These types of bungee cords come in lengths ranging from 7 to 70 inches. The premium rubber core is surrounded by an abrasion-resistant shell for durability. Their hooks are adjustable and reinforced with fibers.
The hooks are also UV stabilized and feature a finger grip for safe handling. The hooks have a patented locking design that is easy to adjust. No ties, knots or mechanical ratchets are required to adjust the hooks; They are simply slid to the desired length and then pulled on the cord to lock them in place. The length can also be changed while the bungee cord is in use. These types of bungee cords are suitable for indoor and outdoor use.
Heavy Duty Bungee Cords
These types of bungee cords are designed with a convenient plastic finger hole for safe handling. The line can be stretched without the line slipping due to the tolerance given by the finger grip. This is a safety issue common with bungee cords.
The hooks have strong metal cores and plastic coatings that prevent scratches. These cables typically come in lengths ranging from 32 to 48 inches. The material from which these cords are made is UV resistant, a latex blend and cross-woven rubber designed not to thin or become brittle over time. These bungee cords are durable and suitable for indoor and outdoor use in a variety of climates. For easy storage and portability, these cables have a zippered carrying case.
Types of elastic cords
The types of elastic cords include:
stretch magic
This is the most common elastic code, being rubbery, round, and composed of a single strand. These types of cords are perfectly used with large beads. Stretch Magic can be a bit more difficult to knot tightly compared to other types of elastic cord. But this type of rubber band is reliable. These cords can be kept tied with a surgeon’s knot with an additional half knot.
stretch floss
This type of rubber band comes in a variety of colors but not many sizes. The most commonly available sizes are 0.5mm and 0.7mm, which are suitable for smaller beads. Unlike stretch spell, stretch floss consists of multiple strands of stretchy material woven together. This increases elasticity and is easier to knot than single-strand cords.
polyester cord
This cord has an elastic core. The polyester used to coat this cord comes in a variety of colors. This type of elastic cord is used for hair accessories and other applications where the cord remains visible in the finished design. This cord cannot be used for long-lasting jewelry.
Leading Manufacturers and Suppliers Contact These Companies GET YOUR COMPANY LISTED ABOVE
Chapter 3: Uses and benefits of bungee cords, bungee cords, and elastic cords
This chapter discusses the uses and benefits of bungee/shock/elastic cords.
Use of bungee cords
The different uses of bungee cords are:
Store canned rings
A bungee cord can be used to hang canning rings. This is a handy way to store your tin rings as they stay out of the way. This is a much better way of storing them as they are easily accessible instead of being kept in a dark drawer at the bottom.
Hang up paper towels
Bungee cords can be used to make a temporary paper towel holder. Normally short bungee cords are suitable for this application. The line is simply slipped through the center of the reel and then hooked onto something sturdy at both ends. This is a handy way to keep paper towels handy when camping or at outdoor parties.
mat carrier
A bungee cord can be used to make a handy strap for a mat. The center of the string is held along the center of the mat. Both ends of the string are pulled around the mat and hooked to the section held against the mat. The mat is kept rolled up, creating a great carrying handle.
road trip entertainment
A bungee cord can be used to hang baby’s favorite toys to keep baby entertained. The bungee cord is stretched between the handles in the back seat. The baby toys hang on it. It acts as a toy mobile perfect for the car.
Prevent spills from shopping bags
When groceries are loaded into a car, they can slosh out of the pockets on bumps. A bungee cord is an easy way to secure your groceries from spilling out of bags. By threading the bungee cord through both handles of each bag and then securing the cord around the headrest of the car seat the groceries are on, you can prevent them from falling out.
Store rubbish bags safely
Garbage bags can slip into garbage cans. This problem can be solved by using a bungee cord. By putting the garbage bag in place and wrapping a bungee cord around the rim of the garbage can and then hooking the cord onto itself, the garbage bag can be held in place.
shelf barrier
Using wire shelves is a great way to add extra storage in a room. But the shelves usually can’t get too crowded as things could fall right off the edges. This is where a bungee cord comes into play. The bungee cord can be stretched over the front end to prevent the items from falling off the edges. This allows more items to be stored on the shelf without fear of falling.
Add layers to curtains
A bungee cord can be a great way to add another layer to your curtains without having to install additional hardware. The tension cord is slipped through the top of the curtain and hooked onto the curtain rod at both ends. This is an easy way to add a layer of blackout curtains behind your existing curtains. This helps block more light in a bedroom.
Storage of cookie sheets
In order to save a lot of space in the kitchen, baking trays are stored on edge. This is where bungee cords come in to create an easy vertical storage solution for the baking sheets. A couple of bungee cords are stretched vertically between the shelves, and then the baking sheets are slipped between the cords.
Use of shock cords
Shock codes are used in transportation to secure speech. A shock code can absorb shock from shock, preventing the items being held from moving and breaking.
Shock cords are used to replace broken loops on zero-gravity chairs.
Shock cords are used when replacing chair straps.
For a walking dog leash, bungee cords are a great solution.
They can be used to make headbands as well as elastic cords.
Shock cords come into play for replacing shoelaces.
Elastic cords offer a solution for winding up or pulling back fabrics.
Shock cords can be used to build a ball stand indoors.
Use of elastic cords
Elastic cords are used to make jewelry such as necklaces and bracelets.
They are used to make headbands and lanyards.
Elastic cords are used to make signs to decorate a classroom, dormitory, or living space.
Elastic cords can be used to organize utensils in the kitchen, bundle toys, and keep things in one place like a bike in a garage.
Benefits of bungee cords, shock cords, and elastic cords
Bungee cords are strong and suitable for setting up tents, tarps, rainflies, canopies and other shelters.
Bungee cords reduce stress on grommets on tarps or tents when used on camping shelters.
Bungee cords can stretch while holding the tarp in place when the wind blows.
When bungee cords are used as tie-down straps, the pull on a pole is reduced while also reducing the risk of tripping.
Bungee cords come in a wide range of affordable sizes with durable construction.
Heavy-duty bungee cords offer good stretch and are suitable for commercial use.
Minicables are inexpensive and their convenient size makes them suitable for many projects. They also have good retention of elasticity.
Carabiners stay in place, have durable construction, and have comfortable handles
Adjustable bungee cords can be adjusted in length to meet application needs, have a wide shape for added strength, and have scratch-resistant hooks.
Disadvantages of bungee cords, shock cords, and elastic cords
When used to hold gear while driving, bungee cords can cause the load to shift. You endanger the safety of bystanders, yourself and your property.
Many of the bungee cords don’t come with a rating letting you know the magnitude of the weight they can hold.
Bungee cords will eventually permanently stretch under normal use and break when exposed to sun, wind, rain and extreme temperatures.
Bungee cord hooks end up being less reliable than the cords themselves.
However, these disadvantages of bungee/shock/rubber cords are outweighed by the advantages.
Considerations when choosing bungee, shock, and elastic cords
Stretch is an important factor to consider when purchasing a shock/bungee/rubber strap. Stretch rating is also an important factor when deciding on a bungee cord.
There is a general rule that says the thicker the shock/bungee/elastic cord, the harder it will be to stretch. Therefore, be careful not to buy a bungee cord that does not stretch.
Not only the elasticity of the rubber cord plays a major role, the material from which the outer sheath is made is also of crucial importance for its functionality. An outer jacket is needed that can withstand the conditions of the environment in which it will be used. If the bungee cord is to be used in potentially inclement weather, a water and mildew resistant outer cover is required.
The visibility of the shock/bungee/elastic cord is another factor to consider when purchasing a bungee cord. A highly visible tether may be required. then the neon yellow bungee cord would be the ideal choice.
Conclusion
Bungee cords, shock cords, and elastic cords can be made from the same materials but have differences in their elasticity and application. Bungee cords are more suitable for outdoor use where great strength is required, while elastic cords cannot withstand too much tension. Shock cords are not suitable for applications that require great strength. They are suitable for applications that require moderate strength compared to bungee and elastic cords. Elastic cords are small in diameter and are best used for small crafts like jewelry making. Finally, it’s important to make careful considerations when purchasing bungee, shock, or elastic cords.
Why is it called a bungee cord?
Bungee Cords Take Flight…to the Moon!
By using large rubber elastic cords, English glider pilots in 1936 were able to launch their planes off of hillsides and into the air – thereby coining the term “bungee” for the elastic cords.
Bungee Cord Replacement Kit (27″)
Sometime around AD 500, the first known use of a stretchy cord for strapping objects and belongings was used by travelers in Siberia in what later became known as part of the USSR. Using strips of caribou gut, these innovative travelers were able to hold onto their possessions as they traveled through the northern parts of frigid Russia.
About 1300 years later, in 1845, a Frenchman named Charles Moore de la Cardamine developed rubber from tree resin. This discovery led to an incredible amount of invention – from rubber tires, which made cars, concrete pavement and highways necessary, to the classic children’s song about the ant and the rubber tree plant. For our purposes, it also helped start the chain of events that would eventually lead to SuperBungee’s high performance bungee cords. But we digress!
From there, Stephen Perry (not the lead singer of classic rock band Journey) patented the rubber band in 1922. Together, these ideas, spanning nearly 1500 years, helped develop what we know today as helpful, useful bungee cords. AND the invention of the best bungee cord on the market today – SuperBungee cords.
Bungee cords fly…to the moon!
By using large elastic cords, English glider pilots in 1936 were able to launch their planes from hills into the air – coining the term ‘bungee’ for the elastic cords. (We always thought “bungee” would turn out to be an Australian invention, like “Barbie” for crickets and not for the Mattel doll loved by millions of girls but incredibly long-legged.) When World War I broke out, These cables were used to provide lightweight suspension for aircraft landing gear, which plays a crucial role in aircraft control. The same original bungee cords used to launch airplanes into the English skies also inspired many a boy’s dream of balsa wood and rubber band launched toy airplanes. Sometimes the rubber bands also powered the toy propellers!
Given the strength of these cords, NASA decided in the 1960s that man’s first trip to the moon required a bungee cord or two to hold things in zero-gravity space. So they designed their own brand of bungee cords to make space travel easier and more efficient.
The modern bungee cord is here
Today, bungee cords not only hold valuable possessions, but people also use them recreationally for bungee jumping, exercising, and even in place of a dog leash or to keep energetic kids close when they’re out in social situations!
Our SuperBungee bungee cords stretch to over 500% of their relaxed length due to our patented ring braid with annular folds. One of our ropes can replace several ordinary low-stretch, low-strength bungees due to its tensile strength of over 1,500 pounds! Ragner Technology Corporation & Gary Ragner took the Bygone Days bungee cord and gave it a fuel-injected makeover, pushing the bungee cord into the modern age for everyone to know, love and use today.
Is paracord shock cord?
PARACORD PLANET: Our Nylon Shock Cord is Lightweight, Durable, & Resistant to Harsh Conditions w/ a Rubber Core of 100% elongation (+/- 10%).
Bungee Cord Replacement Kit (27″)
Sorry, we just need to make sure you’re not a robot. For best results please make sure your browser accepts cookies.
pop-up tent-camper bungee tie-down fix and repair
See some more details on the topic bungee cord for pop up camper here:
Coleman & Fleetwood Shock Cord Kit
Todd G. had to replace the bungee along my king size bed in the pop up. The kit was complete and installation was a breeze. It took 15 minutes at most. The instruction video was also very helpful.
Scott M. Just what I needed! My old lines were dry and brittle and needed changing urgently. Follow the video provided and have both ends done in about 30 minutes. The video couldn’t have been easier to follow and I appreciate them being available. I am restoring a 2000 Utah that needs some TLC and this page has all the items I need when I need a replacement.
Mike G. The youtube video was a great help installing the bungee. and it seems to be working great. The final step of tensioning the cord and attaching the hook left me wondering if the newly installed cord should be fed through the attachment hooks before tensioning or simply left “slack” in the hem.
Kalani M. The new shock cord kit was great. I was for some reason under the impression that the kit came with the 16 or 18 gauge wire needed to create the feeding tool to feed new shock cords into the tent, but it didn’t. It wasn’t a big deal. Derek’s online video showing how to install the new shock cable was really valuable.
roger j just installed works great
John T. Can’t do proper verification until I actually install it!
William S. Excellent product! Installation was easy and delivery was prompt. I highly recommend this product and this supplier!
Rebecca C. The Shock Cord Kit worked on our pop up. The demo video was very helpful with the installation. It perfectly replaces the old cable.
Mark J. My cord around my tent was stretched, that was just perfect for the replacement, everything is tight now
Joseph G. I love the product! Easy to install thanks to the video linked next to the item I bought!
david r Cord fits as stated. All parts were boxed and in new condition.
Wayne H. Perfect got the job, right size, right hooks!
Steve B. Rebuilding a 1992 Fleetwood Grandview and finding the parts I need here! I’m so glad I found this site!
blake l The product arrived as described on the website. easy to use, solid quality product. Use YouTube for easy installation instructions. It took about 15 minutes to fully install.
dennis w. I actually bought these for my son’s RV. My son installed the tie down straps in no time and had no problems. Very satisfied.
Gerard M. had to replace old ones, works great.
David C. New Cord was pretty easy to thread. It’s a little smaller in diameter, which I’m sure helped. I did not use the hooks that came with it. Instead I used a figure eight knot to make loops and then fire fused the end to prevent unraveling.
Aaron C. It worked!
Ben T. Great replacement, hope it lasts 20 years like the original!
Loree W. Worked great
Cindi W. Came quickly. Followed a U-Tube video, went in very easily and now the bunk ends of our pop up are very secure
Marc P. Perfect replacement parts and Eadu to fit.
PATRICIA H. I watched a video on how to replace the bungee cord which certainly made this project easier and safer to do. The video even used my camper model. There was more than enough cord for the king and full pull out beds. I could have made 2 kings. This is the first cable replacement on my 2002. Only time will tell how long these cables will last. I’ve done a good job.
Edward S. Great fast shipping. The product went on with great ease. Watched videos, very informative!
Ben A. Worked great. Very easy to install.
Jason P. was an easy fix. Product works great. The canvas tightened and sealed well. I would highly recommend anyone doing this if your shock cord has weathered at all.
Jean E. I was worried about not being able to install the shock cables but after watching the great video it was a super easy install.
Ryan R. That was so easy. I used electrical tape and taped the end of the new shock cord to the end of the old one. Went through and just kept pulling the new one through by pulling on the old one.
Robert B. SHOCK CORD WAS GREAT EASY TO INSTALL HAS MANY EXTRAS
Dennis E. Very easy to install, works better than the original.
RODERICK R. I was very concerned that I would be able to replace the shock cord on our pop up, even after watching Derrick’s video twice; But the instructions in the video were perfect. Thank you very much!
Lawrence z. worked well the utube when changing the cable helped.
Richard L. Just what we needed. Worked great.
Clifford W. Replaced the shock cap on daughter’s 1995 Colman camper. Was a pretty easy fix.
Timothy F. Kit came quickly and included everything in the description. Could have used a little instruction on how to attach the hooks to the line but once I figured it out it went smoothly. Thanks very much!
stephanie f. absolutely what I needed to replace the bungee on the bunk ends. more than enough for 2 king beds… watch the video, super helpful install tips!
Mark O. Coleman Popup Parts is the greatest!! At first I was afraid to get involved in this project. I watched a video on how to do it and then tackled the first one. Took me about 10 minutes. The other three lasted 5 minutes each! Thank you for your fast service and quality products.
Larry D. Easy to install and worked well for our king bed ends
David and N. I still have the original cables but the days are numbered. I bought the cable for the future.
Tanya T. Product arrived on time and was exactly as described. Was easy to install and attach the ends.
Steve D. Pretty sure the existing shock cable was originally for our new 1998 Coleman Taos. This set was what I was looking for. YouTube video was helpful with installation. In fact, removing the old bungee was more difficult than installing a new one. Bunk ends are now snug and look much better.
Kash S. Very simple and works perfectly
James B. Everything worked exactly as expected. Video was a big help.
Kenny D. Okay
SHANNON O. Bought Cedar for my destiny in 1993, was more than enough for both beds. Easy installation if you have a snake
David L G I ordered the shock cable replacement pack after one of my originals broke. Ordering was easy and shipping was quick. I watched a helpful video on YouTube and installation was a breeze. I also ordered a new bow brace, it also arrived quickly and was better (heavier) than the original.
Ruth T. Once we figured out a way to install the cables, it works great! Great fast service!
Brian D Good job. No problem and fast shipping.
Joseph B. Worked great on my ’99 Taos! Super easy after watching the video Derrick made on YouTube. I got my son involved and he was able to do it without much help.
William G. This isn’t easy to insert, but take your time, if you get angry, walk away and go back. It can be done, make sure you watch the video, it helps a lot
David S. Great kit. It took me about 15 minutes to fix both sides of my slider. The new shock chord works better than the original.
Brigitte A. Great replacement
TED C. The bungee cord for the RV, it was awesome, it didn’t take long at all and there’s enough to play with so you don’t short out.
Rod G. Very easy to use.
Steven H. Thank you Coleman PopUp Parts for having the right parts for your RV. Our 30+ year old camper finally needed a replacement cord for one of our pull out beds. It was easy to buy and install on your website with the little video installation tip. We also ordered a rear light for the same camper and installed it without any problems, a perfect fit.
Darlene M. So easy to install, took about 20 minutes!! Very satisfied, if I had known it was that easy I would have done it sooner
Scott D. Precut lengths of bungee cord for each side of our Coleman Popup (Westlake 1999) were the perfect length to recreate. Many Thanks.
Christine . correct product. Easy installation after watching the included video. Very satisfied
Katherine S. We have a 1997 Colman Westlake. With accompanying video…these were easy to put on and had lots of string for slack (two king beds)
Stella D. This works great and the video helped tremendously. Excellent product and price was reasonable!!
James S. Very easy to replace! The cord is stiff enough to slide through the canvas with ease. It took maybe 30 minutes to exchange both sides.
Polly W. Worked well on my 1996 pop-up.
Richard W. Very good quality, easy to install.
Jennifer P. Item exactly as expected. What was unexpected was the speed with which we received our items. It felt like I just clicked “place order” and then it was on my doorstep! The packaging was adequate to protect my order and overall I am VERY happy with my experience!
Alihbo R. The price was great, I received it on time as they said. I have already installed them on the folding camp bed and they work very well.
Cindy S. Shockcord was easy to install as described love the installation video made installation easy.
Mike P. All items are present and easy to install
Barry P. Works like new. Both sides were changed within 20 minutes. Watched the video and followed the instructions.
Jo H. Exactly what we needed! Very good quality .. easy to install .. instead of pulling out the old one and threading a new one in… After cutting the hook and clipping so it doesn’t slide back in… We took a few inches off the new one and a few inches off removed the old one with sticky black tape and just pulled through….. Worked fantastic!!! Super happy with all the products I bought from your company
HAL H. Installed easily and worked great,
Mary T. Works great. Easy to install. Just tied it to the broken one and pulled through. I got a spare bed for the other bed which is good too. Many Thanks
Terry M.’s product works great, the instruction video was perfect.
Maurice E. I have a 1005 Stoney Creek and the dampers worked perfectly. The video for the shock cords made it easy.
Cynthia M. Perfect replacement for the old bungee. Nice hooks at the end too. A little difficult to install. I stuffed one end into a metal straw, taped it, and threaded it through the grommets. A bit tricky around corners—don’t know what I would have done without the metal straw.
Janet W. The screen looked great from the start. I learned that my old canvas was very stretched. Putting the new canvas on was no easy task, but we got it done and it looks great. I’m looking for flaws and cracks in the other parts, so I have an excuse to swap those out as well. I also really like the three-layer window.
Anja M. It was easy to install and it works great. Fits perfectly.
Jim W. worked very well as a substitute. The thinner line actually works well when retightening through the keeps. Shipped very quickly!
Rochell Z. The kit was excellent and easy to install after watching the video.
Timothy G. Just what I needed for my RV repair Fast service
James L. These are great lines! Works like the originals!
George . The installation went very well, as shown in the video. Thanks for the help
Maurice B. The cord is perfect like the original. looks great, stretches like it should and Berkeley has a nice video to show you how to uninstall it!
Dennis P. Great people to work with. Got the parts on time and the camper is ready.
Mark J. Perfect fit and renewed the tired cords on my bed ends. Recommended.
David A. Worked great!!
TOM T. Easy to install and works great.
Al A. I needed to replace the worn and broken original shock cable so I could put it up for sale. I know it helped close the sale as the rest of the trailer tent was in very good condition for a 1997 year model. Thank you for stocking this product.
MICHAEL T. Wonderful experience. We got exactly what we needed!!
Trinidad J. Exactly what the website said on the repair kit is exactly what the kit I received said. If other parts are required for our pop up camper in the future I will certainly use these services again. Many Thanks
Veedette K. Haven.t has not used it yet. No time. Sorry but seems to be exactly what I need. The keys I ordered worked perfectly and were urgently needed.
Jill A. Great product and easy assembly
Laura W. The product is really good quality but the customer service is excellent!
Timothy W. Easy to install after watching the YouTube video listed on the site.
scott c It worked as advertised and the instruction video was very helpful too!
Eugene W. Knowledgeable and have the right parts for my camper. Excellent customer service! Will use them again and highly recommend
Dennis S. The cable works great, wasn’t what we expected but it works for the bed
Heather C. We bought a 1999 Colman Popup Camper that needed a bit of maintenance starting with a new bungee cord under one side of the camper to go around the bed (our son fell out one night and we found that it was broken). The cord was in great shape, self explanatory, the only tricky part was getting the bungee cord through the corners.
Terry T. The front cord that secures the tarp under the frame was frayed and torn. Thread the new shock wire back through the grommets, good as new.
Leigh C. Perfect replacement part. Thank you for posting the installation video on your website. Super helpful tips!
Amazon.com
Enter the characters you see below
Sorry, we just need to make sure you’re not a robot. For best results please make sure your browser accepts cookies.
Bungee Cord Replacement Kit (27″)
The product was added to your shopping basket.
Related searches to bungee cord for pop up camper
Information related to the topic bungee cord for pop up camper
Here are the search results of the thread bungee cord for pop up camper from Bing. You can read more if you want.
You have just come across an article on the topic bungee cord for pop up camper. If you found this article useful, please share it. Thank you very much.
