Cake Boards With Centre Holes? Best 47 Answer

Looking for a cake board with a little extra strength and durability? Masonite’s are made from steam-cooked and pressure-formed wood fibers, making them a type of engineered hardboard that’s the perfect pie stand for those heavier cakes.

As well as looking superb, Masonite Cake Boards are 4mm thick and are extra strong and sturdy with the ability to support the considerable weight of a larger, heavier cake.

Available in a variety of different designs, colors and sizes including 10″, 12″ or 14″, our masonite cake boards can be wiped clean and reused whenever you need them, making them an incredibly economical and practical choice. No matter what size or height of cake you are baking or how you decorate it, we have a perfect masonite board for you.

Can’t find what you’re looking for? Check out our range of cake displays.

After my four tier wedding cake fiasco, I vowed never to bake a tiered cake again until I figured out exactly what I did wrong.

Stack like a pro

When I first started cake art I was absolutely terrified of selling anything about a one tier cake. All I knew was that anything I tried to stack would collapse and ruin the cake, the customer would be angry, and I would have a terrible reputation as a terrible cake artist. And it happened. This has happened to me twice – once with a wedding cake and once with a birthday cake. A client was angry; The other client was my niece and loved me, so all I got away with was humiliation. After the four-tiered wedding cake fiasco (my niece’s cake), I vowed never to bake a stacked cake again until I figured out exactly what I did wrong. So my journey of trial and error began, and I’ll pass what I’ve learned on to you so you can avoid the humiliation I carry to this day.

Stacking cakes is actually pretty simple, but there are a lot of little things that can cause a stacked cake to become a bottom cake. Luckily, I’ve identified most of these issues and I’m here to teach you how to properly stack a cake. Once you learn how to stack a two tier cake, the sky’s the limit. You can go as high as you want with as many cakes as you want without fear of collapsing.

Here’s a four tier wedding cake I didn’t screw up

Step one

You’d think the obvious first step would be to have your cakes ready to be stacked, but there are a few things you can do about your individual tiers that will make stacking easier and foolproof.

First things first: when you take your freshly baked cake out of the oven, allow it to cool completely. There must not be any residual heat in the cake. If you try to stack a cake that is still slightly warm in the middle, you will encounter disaster. If you are in a hurry, you can also chill the cakes in the freezer.

Here’s an excellent tip I was taught by one of my baker friends who has been in the business for several years; Once the cake has cooled completely, wrap each layer in cling film and leave at room temperature overnight. Not only does this help the cake rest so it condenses together to avoid a crumbly mess, but it also locks in the moisture inside so you don’t have to use simple syrup to boost the moisture levels. Trust me, this step is the difference between a mediocre tasting cake and an insanely moist and delicious cake.

To finish off the perfect preparation of your cakes, read my article on frosting and crumb coating and the article on leveling. Leveling your cake is paramount to avoiding a disaster while stacking your cake. I will link these articles below (at the bottom of this article). Check it out and follow the instructions to the letter.

Get as close to that as you can

step two

Now that you have your cakes as perfect as can be, you need to decide what you are going to use for stability. Some bakers use bubble tea straws, others use wooden dowels. I use both alternately depending on what I have on hand. Both work as well as each other.

You also need to decide whether or not to use a cake board between each layer. Sometimes yes, sometimes not. It all depends on what recipe I’m using, how high the cake is and how dense it will be. There are times when I can stack a two tier cake without using straws OR a board to separate the tiers. However, I don’t recommend doing this because it’s a risky thing to do. If you’re just starting out and don’t know how your cakes will behave, it’s always better to use more support than you need rather than needing it and suffering a breakdown.

Before dowelling the bottom tier, move it onto the cake board that you have already prepared and ready to display. This will save you a lot of heartache in the end. It’s almost impossible to move the bottom layer of a stacked cake to a new board.

So let’s say you’re just getting started. You will have an 8 inch cake as the base cake and a 6 inch cake as the top tier. First move your 8 inch cake onto the presentation board. Now leave the 6-inch cake on another cardboard round, but trim the round so it’s exactly the same size as the cake that’s sitting on top. This will help you hide the board when you stack it while still providing the stability you need. This works the same for all cake sizes. It’s important to use cardboard rounds for this and not cake drums, as cake drums are very thick and typically serve more as display platters than stability.

For any size cake, whether you’re making a two-tier cake or a six-tier cake, you want each individual cake to sit on a single circular piece of cardboard that’s exactly the same size as the cake. The easiest way is to cut the cardboard rounds with a craft knife.

Round cake on cardboard

This is a cake on a cardboard round. If you were going to use this cake for stacking, you would need to trim the board after freezing so it was exactly the same size as the cake.

step three

Now that your cakes are on their perfectly fitting cardboard rounds, you’ll need to measure the top of the cakes to see where they will sit. An easy way to do this and get it perfect is to take a piece of parchment paper, place the next larger size cake pan on the paper and trace around the pan. Cut out the remaining circle and you have a just-sized template.

Position the circle on the larger cake, making sure you center it exactly. Look at it from different angles and make any necessary adjustments.

Once you have the parchment as centered as possible, use a toothpick to toothpick the outside of the parchment into the icing.

Create a circle of parchment for each part

Template for placing dowels

step five

Once you’ve placed your dowels, it’s time to start stacking. We left the center without dowels for a reason. You don’t have to place a center dowel for two tier cakes unless you want to. They are not as likely to fall off as large cakes.

If you’re making a buttercream cake, you’ll need to be careful when stacking the cake to avoid denting your icing. Using spatulas is one of the best ways to ensure you don’t ruin your frosting. Place the back of the cake down first, making sure you’re inside your circle line, and pull the spatula out towards you while gently letting the cake fall into place. If you see yourself not following your policies, you should make a decision.

If the cake is grossly out of line, you’ll have to move it. If your buttercream is crusted, the easiest way is to use a paper towel over the palm of your hand to gently shake the cake in place. If the buttercream isn’t already crusted, wait until it needs to move the cake.

If you’re using a non-crusting buttercream and need to adjust the cake position, place the entire cake in the freezer for fifteen minutes. You can then adjust the top layer’s position without ruining your frosting.

Turn the cake over, look at it from all angles and make sure it’s completely centered before moving on to the next layer.

The key to a securely stacked cake is making sure the layers are all completely even and each layer is absolutely centered.

step six

If you want extra security consider placing a dowel all the way through the center of the cake through all the tiers. The best type of dowels I’ve found for tiers three and under are barbecue skewers. They’re pre-sharpened, long enough to get through all layers and thick enough to be sturdy.

Find the center of the top tier, insert the sharpened dowel and, hands down, poke it through the top tier. When you reach the cardboard round below the top level, you’ll feel it. Use a rubber mallet or a hammer wrapped in tape to gently drive the dowel through the board. You can keep hammering it through the entire cake until it goes through the bottom panel (your presentation panel) and you’re done. Your cake is now done and set!

An excellent tutorial from Krazy Kool Cakes

How to line up your cakes

Cake Decorating Basics: How to line your cakes

You would think that leveling cakes is a piece of cake. However, many home bakers don’t realize the importance of creating a level base!

How to coat your cakes in crumbs

Cake Decorating Basics: How to Crumble a Cake

The crumb coat is also known as dirty ice. This step traps crumbs in the frosting and prevents the last layer of frosting from being littered with dirty-looking crumbs.

How to achieve the perfect buttercream finish

Cake Decorating Basics: How to Achieve the Perfect Buttercream Finish

Buttercream surfaces can be just as smooth as fondant with practice and patience.

© 2018 Becca Hubbard-Woods

Using straws instead of dowel rods to support your cake is a quick, easy, and inexpensive way to make your cake strong.

This Rose Levy Beranbaum is a smart woman. This is another tip I learned from her book The Cake Bible that has saved my butt a million times over. Use straws instead of dowel rods to support your larger cakes. Their theory is that the straws displace less cake and therefore can support as much weight as a dowel stick.

It works great for me because straws are cheap, easy to find, and disposable. I pretty much always have them with me when I have a cake that needs a little extra support. I use them whenever I’m making a tiered cake or when using a slippery filling like lemon curd.

How to use straws for cake supports:

Insert straws into cake before frosting but after filling. Where you place the straws depends on what you need to support. For tiered cakes, I pin the straws in a circular pattern around the perimeter of the next tier with some in the center for extra support. When using them for slippery filling, I place the straws around the cake. I like to use multiple straws.

After inserting the straws, pull them up a bit and cut them off where the cake mark is on the straw.

Push the cut straw back into the cake. Cut the remaining straws to length. Frost as usual.

How to avoid using plastic straws:

Since plastic straws are basically ruining the earth, I’ve tried to avoid them whenever possible. I was very pleased to find out that paper straws work just as well as plastic for supporting a tiered cake and holding a tiered cake together. They’re a bit more expensive, but they don’t kill all turtles. Seems like a worthwhile compromise to me.

For more fun cake decorating tips, check out how to fill a piping bag with a water glass or how to bake a tiered cake while working full time!

If you liked this post, share it on Facebook or Pinterest!

Happy baking!

If you’d like a copy of my FREE Bakery Bakery Checklist, sign up below and I’ll send it to you. I like to print off a copy and keep it in my pantry so I know what I have and what I need from the store.

Happy baking!

How to make tiered cakes

This post may contain affiliate links. Please read my privacy policy and disclosure.

Are you ready to literally take your cake to the next level? Well, I’m talking about making tiered cakes. You know, the ones that are stacked on top of each other, making the cake taller and with different tiers.

Tiered cakes add that wow factor to the cake and make it that little bit more fun and special for the event. I know there are many single-tiered cakes that are awesome, but a multi-tiered cake seems to get more attention due to its “increased presence”. And of course, another reason for a bigger cake is to have more servings. Making a one-tier cake for 300 people takes up a lot of table space, as opposed to making a five-tier cake.

The most important thing to think about when building a stacked cake is the support. Adequate support is required to prevent the stacked layer of cake from sinking into the layer below.

This tutorial shows how to stack a cake using dowels for support. There are different types of dowels that can be used to support a cake. Below in the photo are the types of dowels I use most of the time. I use wood, hollow plastic, plastic straws and even skewers. Other cake decorators have also used bubble tea straws, thicker wooden dowels, and other types of support systems. All these dowels must be food safe.

The dowels I use a lot, especially for large cakes or cakes with at least 3 tiers, are wooden and plastic dowels. These two are very strong materials and hold up very well. Use sharp scissors or a small saw to cut the wooden dowels. Use a serrated knife or a sturdy utility knife to cut the hollow plastic dowels. Plastic dowels are larger than wooden dowels, so this would (very slightly) affect portions. Still, I prefer plastic dowels these days because I find them easier to cut than the wooden ones. Use a cutting board underneath to safely cut the dowels.

For smaller cakes (maximum 2 tiers) I also used plastic straws and wooden skewers. I like to use these because they are easy to cut. What I do is I cut the straws and skewers to the same height as the cake. I stick the straws into the cake and stick the skewers into the straws for extra support.

So let’s start stacking a cake…

Stacked tiered cake construction

For this tutorial we will build a three tier cake using hollow plastic dowels. The cake sizes starting from the bottom are 12″, 9″ and 6″. Of course, you can use different cake sizes depending on your cake needs.

A multi-tiered cake will be heavy, so it needs a stable base to stand on. I usually use a 1/2 inch thick cake drum for the bottom. Another option would be to use a sheet of hardwood cut to shape and covered with cake foil. Whatever you use, make sure it’s food safe and strong enough to support the weight of the cake.

Place the largest cake on the cake drum and fill and glaze as usual. Place in the fridge until cool. It’s easier to work with the frosting on a chilled cake that’s hard than soft.

I usually just guess where the cake is going to go on top. But to be more specific, take another round cardboard cake or pan the same size as the next layer to put on top. Place it in the center of the cake or wherever you want the cake to be placed. Trace the outline lightly with a toothpick or knife.

Take a plastic dowel and insert it into the cake inside the markings. Mark the height of the cake with your thumb, take out the dowels, mark with a pen and cut. Use this dowel as a guide when cutting the other dowels. I used four plastic dowels. If you are using wooden dowels I would put in about 6 of them.

Place the 2nd tier (9″ cake) on the same size cardboard cake circle. Fill, freeze and chill. Do the same for the smallest cake (6″) that goes on top. Repeat the dowelling process for the 9 inch cake.

To place the 2nd tier on top of the first, gently grasp the cake with your hand and use a metal spatula to guide the cake down the center. Do the same with the smallest cake.

Decorate the cake as you like. Finally, to hold all the cakes together and make sure they don’t slide down, use a large wooden dowel, slightly shorter than the cake. Sharpen one end of the dowel and, with the help of a hammer, gently drive it into all the layers until it reaches the cake drum. Cover the hole made at the top with buttercream.

And there you have it – a tiered cake.

The images, tutorials and content on make-fabulous-cakes.com are protected by copyright. DO NOT distribute or copy the content without written permission. DO NOT edit, crop or remove watermarks from images or videos. If you intend to use any text, template or image contained therein, it must be linked to this website quoting www.make-fabulous-cakes.com. If you have any questions, contact us HERE. Disclosure: Please note that some of the links in this post may be affiliate links. I get a commission if you decide to make a purchase. It doesn’t cost you anything extra and I really appreciate your support, thank you!

× Sign up for the newsletter and get the latest updates!

Be the first to know about new recipes and tutorials, e-courses, and more!

Subscribe to email

Enter the email address to sign up

Please enable JavaScript to view the comments provided by Disqus.

Disqus

› Tiered cakes

The cake board is an essential piece of equipment in any cake lover’s baking arsenal, but with so many shapes, sizes and materials available today, it is extremely important to choose the right board for the right cake.

The right cake stand not only supports the stability of your cake, but also gives it additional stability during transport and a professional appearance in the presentation.

When choosing the right cake board, the main difference lies in the thickness of the board as well as the materials from which it is made. Drum boards are your thickest option for the most structural support, while standard cake boards are an inexpensive option when a drum may not be necessary.

What is the difference?

What are standard cake boards for?

Their standard cardboard cake boards or STD cake boards are usually 3mm thick, covered with silver foil and are generally used for lighter, smaller cakes – or as extra support between cake tiers. They’re a great base for inserting dowels between cake tiers as they’re super thin and almost imperceptible in your assembled masterpiece.

What are drum boards for?

Much thicker than your standard cake boards, drum boards are made from heavy gauge cardboard typically around 12mm thick. Drum boards are ideal for heavier cakes, such as large sponge cakes, fruit cakes and tiered wedding cakes.

What are masonite slabs for?

Masonite cake boards are a popular casual option and are made from compressed wood fiber (MDF) and are typically between 4mm and 6mm thick. Although some go up to 8mm. Their added strength means you can opt for a thinner slab that is, however, much stronger than your standard cardboard option.

Cake design by @4CAKE_SAKE

Are cakeboards reusable?

In the age of reduce, reuse and recycle, you can save time and money when it comes to cake boards. Most foil-covered cake stands can be easily wiped clean with a damp cloth after use. Just be sure to wipe gently and not scrub too hard, and you’ll be able to use the same boards for a few upcoming cake projects!

How to decorate a cake board

Sometimes your cake-like masterpiece deserves so much more than your standard silver foil finish. So why not try one of these options to finish your cake at a professional level?

Cover with sugar paste

Start by brushing a small amount of water or edible glue over the entire surface of your cake board. Knead and roll out your sugarpaste as usual, then drape over your cake board so it covers all edges. Cut off excess sugar paste and gently rub over it with a hair straightener.

We recommend covering the cake stand a few days in advance so that the sugarpaste has had enough time to harden when decorating.

Cover with contact paper

Choose the perfect pattern for your finished cake, then place it face down on a flat surface. Place your cake board upside down on the paper with the silver foil side facing down to ensure it is completely covered. Peel the sticky backing off your contact paper, then press your cake board down like you practiced earlier. Cut around the paper until you have an edge just enough to cover the sides of your board. Using the excess, cut them into strips and carefully glue each one in place. Here’s a video to help you on your way.

Wrap with ribbons

For a simple yet stylish finish, why not opt ​​for a ribbon finish around your cake drum? A ribbon that perfectly matches the depth of your cake stand looks super effective when wrapped around and tied in the front with a cute bow. Look how @sallymariecakes does it! Or get inspired by @chikzpatisserie

Cake design by @sallymariecakes

Cake design by @chikzpatisserie

Go for preconfigured

Although many cake stands are readily presented with a silver foil coating, some cake stands (often masonite boards) are available in a unique pattern or design to add a unique touch to your cake when it comes to displaying your centerpieces. Some popular designs include marble effect, wood effect, water effect and even grass effect coatings.

Learn how to glaze a cake with these 10 easy steps! Yes, even if you are a beginner, you can learn how to decorate a cake like a pro from start to finish!

We’ve all seen these gorgeous cakes.

You know the ones I’m talking about. Those that are even and smooth and beautifully decorated. The ones with the straight edges and the sprinkles in just the right place, wondering how they do it!?

WAS THERE. Actually I was there for a while but I made it out alive and I’m here to give you my top 10 tips to make your cakes look more professional!

How to decorate a cake to look more professional

When I first started my cake decorating days, I was fascinated by how cakes could be decorated in so many different ways. I was wondering how to stack my layers and how the frosting always looked so even. But mostly I found myself wondering why the heck my damn cakes couldn’t look the same!

Now, after pastry school and 10 years of cake decorating experience, I’m here to share my tips and tricks on how to start making your cakes look better.

Maybe you want to start your own cake business and you don’t know anything. Or you like to decorate cakes as a hobby. Maybe you want to impress your in-laws. Whatever the reason, here are your basic starting points for making your cakes look more professional.

Disclaimer: There are definitely ways (see below) to decorate beautiful cakes without special cake tools, but your cake life will be a lot easier if you have the following:

An offset spatula like this A bench scraper like this A cake turntable like this

Let’s get started and learn how to decorate a cake!

First bake your cake in 3 layers

Usually when people make layer cakes, they always make them in 2 cake pans, which equals 2 cake layers, duh.

When I started I couldn’t understand why my cakes didn’t look like the ones in the magazines and it was because my cakes weren’t big enough!

Depending on the cake recipe you use, this may mean doubling the recipe. A more professional looking cake = a big cake, so double up!

I use a standard of 3 cake layers in my tiers. When combined with the buttercream, they will grow 5″-5.5″. So this one cake has 3 layers and is one tier high for a total height of 5″.

To be clear, a pie layer is made up of pie layers. No, layers and planes are not the same.

A cake layer is composed of cake layers.

Next tier from the cake tops

A flat cake is much easier to stack than a dome cake, so you’ll need to level it.

You can take a sharp, long, serrated knife and start evenly flat bladed at the lowest part of the dome. In a push-and-pull motion, cut through (like slicing a bagel flat).

Make sure to keep the blade at the same level throughout the cut or it will become crooked.

A great trick is to leave the cake in the pan and once it has cooled, place the flat side of the blade on top of the pan and use it as a guide to chop off the top.

This method works well if the entire surface of your cake is being baked higher than the pan.

Optional: Stuff your face with the pie tops or pawn them to someone else.

cake boards

Cake boards make cake decorating easier for you, especially when you are transporting the cake.

You can certainly decorate a cake on the stand you’re serving it on, but if you plan to move the cake around a bit, you’ll need cake boards.

For a normal cake I use two cake boards.

One that’s the same size as the cake and goes straight to the bottom of the cake. And a second one at least 2 inches taller so I can decorate and move the cake around if I have to without spoiling the bottom.

Dab the frosting

You should now have 3 flat cake layers.

First take a small amount, e.g. B. a teaspoon, frosting and spread it in the center of the larger cake board.

Place the smaller cake board in the middle of the larger one.

Add another small amount of frosting to the smaller cake board, but spread it out more evenly – the offset spatula works wonders here.

Now place your thickest cake layer (to be honest the cakes may not be the same size even if we try our best) on the cake board.

Tada! You’ve Just Made Your Cake – Now the cake won’t slide around while you stack and glaze it.

Fill and stack

Ok, maybe that’s two things, but they belong together, so I’ll keep it that way.

Once you’ve secured your first cake layer onto your cake board, it’s time for the frosting or buttercream.

Some people use a piping bag so they know they’re getting 100% even amounts of frosting between coats. However I don’t have the patience to use another tool and clean and am lazy so I just use my offset putty knife.

Scoop up some of the icing, starting with about 1/3 cup – eyeball – and drop it into the center of the cake.

Using the spatula or a knife if you don’t have one, work outwards from the center of the cake, spreading evenly all the way around, stopping about 1/2 inch from the edges.

This will be filled in later when you make the crumb coat.

Take your next cake layer — and this is crucial — turn it over so the bottom of the cake is now the top and place it on top of the frosting.

This will give the cake a more even shape overall. Repeat these last two steps with the next layer.

PS: If you use a cake turntable I do it all there and rotate as I frost, but if you don’t have one just do it on any cake stand that fits.

Now look at the stacked cake from eye level and see if there are any bumps. If this is the case, you can press on the opposite side of the cake to even it out, or gently lift the edge of the cake where it’s uneven and add more buttercream to even it out.

Freeze

Now that you have a nicely stacked cake, stick it in the freezer for 15 minutes.

This will help minimize the amount of crumbs that come loose when you start icing it.

If you use cake boards they help here, otherwise move some things around so you can build a massive cake construction in your freezer.

crumb coat

A crumb coat is essentially a light layer of frosting over the cake, applied before the actual real buttercream coating to catch any crumbs. This will ensure the top layer of buttercream is crumb free and nice.

This part gets tricky if you don’t have a turntable, which is why I recommend it, but you can still make it work.

Use the back of your spatula to pick up some icing and smear it onto the side of your cake while twisting with your other hand (lo, tricky). Spread and spread evenly over the cake from bottom to top.

Be sure to scrape the back of the spatula on another bowl or on top of the buttercream dish so you don’t dip a crumb-filled spatula into a crumb-free bowl of buttercream when you need another spoonful.

Then put some icing on top and use the spatula to even it out. Use your bench scraper to clean the sides. Holding it vertically, stand on the cake board against the cake and turn the turntable to level it.

It’s okay if you can still see the cake layers, you really just want to seal the crumbs.

Place the cake in the freezer for another 5 minutes.

How to glaze a cake

You’ll do the same thing as the crumb coat above, only with more frosting, and this time you want to completely cover the cake layers. This is called a top coat.

Start on the sides from the bottom and work your way up with the spatula, going around and around, twisting and spreading as you frost. When the rest of the cake is covered and you’ve reached the top, stop and switch from the spatula to the bench scraper to smooth out the sides even more (don’t work on the top yet). Making sure your wrist is straight, the scraper is straight on the cake board and the long side is leaning against the cake, rotate the turntable. If you notice that some spots need more frosting, that’s ok, just add a little bit in those spots. Keep turning the bench scraper against the cake and it will level it. Pour icing on top and spread evenly with spatula, leaving a small gap between the edges.

straight edges

Now those edges might give you a problem because if you flatten the sides, they will stick out at the top. Then when you flatten the top, they do this weird thing about the sides.

Here’s what you do – PLANE.

Shall I explain? Yes of course.

Start where the sides stick out over the edge of the cake. Hold your spatula with one hand on each end, then (and that’s how they explained it in cooking school – real -) go from the top over the edge from the outside of the cake to the center. Glide your spatula over the edges like an airplane is about to land.

I know it sounds weird. But this swooping action works. You keep the spatula flat and straight the whole time. They come straight down onto the frosting at an angle and then land and go straight onto the cake.

Stop when you get to the middle and repeat on all edges. There. Airplane.

smoothing of the cracks

After you’ve smoothed out the edges, you might just need a little extra help to get those tricky cracks and kinks.

Insert spray bottle.

Fill a spray bottle (the one you use only for food) with clean water and spray. your. Cake. You understood me.

Sprinkle water on that beautiful cake you just became obsessed with. I’m not talking about it. I mean spray lightly with water. Then immediately take your spatula and smooth it over those tough spots.

Immediate solution.

Just a word of warning about this – you must use this trick in the final step before proceeding with decorating. You can’t use it and then decide your cake needs more icing and pour icing on top. It won’t end well.

This trick should only be used at the very end to smooth the cake.

When I’m working on the end, I lightly spray my cake all over and then take my bench scraper and give it a good swirl to smooth everything out.

Also, spray very lightly on cakes that have food coloring in the buttercream. You don’t want the paint to drip and bleed down the cake.

Cake decorating ideas

Finally time to decorate! Here are some of my cake decorating ideas:

Throw some sprinkles on top and sides. Yeah literally throw ’em they’re sprinkles who cares where they end up it’ll be pretty because hellloooo its sprinkles! Side note – this needs to be done right after the frosting while the buttercream is still gooey – if you wait for the buttercream to form a crust the sprinkles won’t stick.

Get a cake topper like this one

Top the bottom and/or sides of the cake with nuts, pretzels, candies,

Decorate your cake with fresh flowers. Read my tutorial on how to do this safely here!

Sprinkle with fancy salt if it’s a chocolate or caramel cake.

Cover your cake with cookies in a fun pattern.

Drizzle store-bought or homemade sauces over the cake.

Decorate without tools:

If you’re reading this and you’re like, “But what if I don’t have any of the tools you mentioned?”

You can:

Add frosting onto a cake using a flat, regular spatula, a knife, or even the back of the spoon.

Frost as best as possible, then scrape over with a fork or the back of a spoon for a rustic finish

Cover it with decorations.

Well there you have it!

There is definitely no right or wrong way to bake and decorate cakes, this is just how I do it.

Also, remember not to be too hard on yourself, usually the things we notice that no one else would, so take it easy.

Happy baking everyone!!

You might also like these decorating tutorials:

SaveSave

SaveSave

SaveSave

This post contains affiliate links. That means if you buy something through one of these links, I’ll get a small commission at no extra cost to you. Thank you for your help in supporting my blog!

Learn how to make and cover cake platters with foil and other decorative papers in this awesome DIY tutorial.

So the title of this page is “DIY Cake Boards”. So, shall I make my own cakeboards then? My answer is mostly no and yes, very rarely.

Cake boards are not often homemade. They are so readily available and cheap; There’s no reason anyone would want to make one.

Cake Boards DIY – Cover cake boards

When should I bake and when should I buy? But there are times when I make my own cake toppers and those are the times when I can’t find the right shape or size for my cakes. Or when I realize I’ve run out of cake plates and I’m rushing to fill a cake order and don’t have time to run to the store to get one!

Making cake plates from scratch really isn’t that difficult, at least the way I make them. All I use is thick cardboard and food wrap (I even used baking foil) to wrap the board. You can find these in cake decorating stores or you can buy them here. You can even use decorative paper to make it food safe or have a layer of plastic wrap around it.

These are the steps I follow to make my own cake toppers and cover them with paper and other decorating material:

How to Make and Cover Cake Boards – Make your own cake boards

These are the main materials you will need for this cake stand DIY project:

Cardstock – This should be slightly larger than the size of the cake you are planning to make the cake board for.

Cake pan – I use my cake pans to draw the cake board template. You can also draw the drawing freehand.

Ruler – This is for accurately measuring the sides of the cake board so the cake board is the correct size.

Cake board foil – this is material used to cover the base plate.

Glue

scissors

And this is how it works step by step with the DIY cake boards:

The template

The first step in making the cake boards is to prepare the template. For example, if you are baking an oval cake and need an oval cake stand, you would need to trace the outline of your oval cake tin onto a piece of cardboard.

Cake Boards DIY – An Unusually Shaped Cake Pan Draw the outline of the cake pan

Next, remove the can and draw another outline, this time about 1″ to 1.5″ from the earlier outline. The addition of 1 to 1.5 inches is to ensure the cake board is slightly larger than the cake itself. Cut the board following the second outline.

Repeat the process for another board that is the same size. I make sure to use at least 2 boards stacked together to hold my cakes, but if you’re ok with one, you don’t have to cut 2 boards. One would do.

Cake Boards DIY – the basic template Cake Boards DIY – 2 boards for a stronger base

Glue both board parts together. This would form the base of your cake board.

Cut the wrapping paper

Next, place the cardboard cutouts on your foil and transfer the pattern to the back of the foil.

Now, the piece of foil you use to wrap the cardboard template may not be exactly the same size as the cardboard. This is because it needs to be wrapped around the cake board. This is not full packaging. However, the sides need to be folded down to keep the cakeboard looking neat and the cardboard hidden.

When you trim your foil, give it an extra allowance of about 2 inches on the sides for this purpose. This is so that there is enough foil to fold the board sides over.

To make folding easier, make short cuts all around the foil. Be careful not to let the cut go beyond the outline of the cake pan you made on it earlier. You can keep each snip about 1 to 2 inches apart.

Finally, wrap the foil around the board and fasten the bottom neatly. Now the foil doesn’t need glue to hold it in place. But if you are using paper or other material you would definitely use glue to hold everything in place.

The back of a DIY cake board before packaging DIY cake boards – the back of a finished DIY cake board

Once the gluing is done, turn the board over. And this is what the finished cake board would look like:

Cake Boards DIY A handmade cake board

Cake Plates DIY Note:

I only use cardboard for small cakes (i.e. less than 8 inches in diameter). Even then, I stack at least 2 boxes together to make sure they can hold the weight of the cakes. If you’re planning to make a large cake board for a large cake, it’s best to use a piece of foil-wrapped plywood as the base. Bare cardboard may not support the weight of the cake.

This is how I usually make and cover cake tops for my cake top DIY projects. But that’s not just it. Most of the time when I’m using plain foil to cover my cake tops, I don’t like leaving my cake tops plain and undecorated. So I mostly cover them in fondant (for fondant covered cakes). Other times I add some other decorations (in the form of fondant cutouts, candles, doilies, etc.). Click here to read all about how I cover my cake tops with fondant and here to read all about other cake top decorating ideas.

I hope this DIY cake stand tutorial is helpful for you when making your own cake stand and covering them with foil.

If you have other ideas on how to make cake boards and toppings, please share below.

Have fun decorating 🙂

Top 15 Baking Tools – Must Have Essentials for Every Baker