Can You Epoxy Acrylic Tumblers? All Answers

directions

Step 1: Prepare the cup

In order to prepare your Starbucks mug, you will need to finish the surface with a sanding finish. Sand down the surface with 400 grit sandpaper to give your Crystalac something to bond with too! Then apply 3 light coats of clear coat about 30 minutes apart. Then let it dry for 48 hours!

Step 2: Apply glitter

I like to apply my glitter with Brite Tone. I apply a good amount of Brite Tone and then sprinkle my glitter on the mug. Leave to dry for 4 hours. (See this video for steps on how I add my glitter). If you’re making a full glitter cup (rather than just sprinkling glitter), consider sealing your glitter with e6000 spray or spray paint. For more information on sealing glitter, watch this video:

After applying the e6000, wait an hour, then you’ll want to roll your mug in parchment paper. This will smooth out the glitter and help you reduce the number of coats of Brite Tone you need to smooth out your mug! If you seal your glitter with clear spray paint you will need to allow it to dry and degas for 48 hours before proceeding to step 3.

Step 3: Seal until smooth

Using the mug on the spatula, layer the Brite Tone until the mug is smooth. Each coat needs at least 4 hours to dry before painting again. After 4 coats, sand lightly with 400 grit sandpaper and continue layering BT until smooth. If necessary, you can grind again after another 4 coats of BT. The exact number of layers will depend on how flat your glitter lays on your mug and whether or not you sealed it. Just keep layering and sanding all 4 until the surface is smooth.

Step 4: Add Stickers

Once the surface is smooth you can add your decal. Since you’re putting Crystalac over the top of the decal, you can use any type you like! Vinyl, water slide, temporary tattoos, etc.

Step 5: Layer until smooth

Then you can apply Brite Tone to the decal until you are satisfied. There’s no hard and fast rule on how many coats you need, so just keep going until you’re happy with the look and feel!

Connect with me on Instagram!

What is epoxy glue and what is it used for?

An epoxy is a two-part adhesive that is formed when you mix epoxy resin and hardener. The two substances are stored in different containers and are only mixed together when they are glued, for example with a double syringe. The mixing ratio should be 1:1, otherwise the resin will not crosslink.

After you have mixed both components, the pot life begins. This is the period in which the parts to be bonded can still be moved and changed. Depending on the adhesive used, the pot life can range from a few minutes to several hours. After the pot life, the adhesive needs several hours to reach its maximum strength.

Epoxy is very versatile and extremely strong, making it perfect for DIY projects. It’s also a gap filler, making it perfect for reconstructions. In addition, epoxy can be sanded, drilled and painted. As a result, it can be used much more widely than conventional glue.

Epoxy resin takes acrylic paintings to the next level, giving them a professional looking finish with a glossy sheen that makes the color stand out! Coating your acrylic painting with ArtResin is easy – it is

We love using wooden art plaques

here at ArtResin – you can mount your artwork and pour your resin directly onto the panel! Some panels even have a raised lip specifically designed to hold resin – making for super easy pouring with clean edges.

Deliveries:

A 12″ x 12″ wooden art board

an acrylic painting to match the panel OR acrylic paint and a brush

ArtResin epoxy resin

A pair of nitrile gloves, a stir stick, and a spatula

a level

a measuring cup with easy-to-read measuring lines

a mixing container

a hand lamp like our Artist’s Torch

toothpick

an empty plastic bag or cardboard box with the flaps cut off to protect your piece while it dries

Let’s start ….

Browse our Resin Art Accessories & Tools!

Steps:

1. Prepare your acrylic painting

You can choose to mount an acrylic painting onto the panel with an adhesive or paint directly onto the wooden panel like we do. There is no need to seal your acrylic painting before applying ArtResin… ArtResin is actually a sealant! However, it is imperative to ensure your painting is completely dry before applying your resin coat.

👉TIP: As an organic material, wood can contain trapped air that can enter the resin in the form of bubbles. There are many variables that can affect gas bubbles: the type of wood, how dry the wood is, humidity, etc. Pre-sealing wood with a spray or paint-on sealer is an option to avoid bubbles. We always recommend testing so you know exactly what results to expect before resinating your final project. However, when in doubt, you can never go wrong by playing it safe and pre-sealing.

2. Calculate how much resin you need

Using our resin calculator, simply enter the length and width of your piece to determine how much ArtResin you need.

👉TIP: A standard 1/8″ coating for a 12″ x 12″ panel requires 5 ounces of resin (2.5 ounces of resin and 2.5 ounces of hardener). Measure the lip on your panel as it may vary For example, the plate in our video, z, has a 1/4″ lip. To fill it to the brim you would use double the amount: 10 ounces total resin (5 ounces resin and 5 ounces hardener).

3. Stir thoroughly

Wearing gloves, measure out exactly equal (by volume) amounts of resin and hardener. Mix thoroughly for a total of 3 minutes, making sure to scrape the bottom and sides of your blender jug.

👉 TIP: For our very best measuring and mixing tips, read the How to Measure and Mix Resin and Hardener blog.

4. Pour the resin

Pour the ArtResin onto the center of your piece and spread to the edges with a plastic spatula or popsicle stick. You have about 45 minutes of working time before the resin becomes too thick to work with.

👉TIP: Read our How to Pour and Spread Epoxy Resin blog for more resin tips and techniques!

5. Use your flashlight

Using your artist’s torch, hold the flame a few inches above the resin surface just long enough to pop the bubbles, and hold the torch from side to side the entire time.

👉TIP: If you’re nervous about using a flashlight, don’t be! Read our blog with everything you need to know about using a torch on epoxy.

6. Final inspection of your resin art

Once the piece has flared, examine the resin in the light for any omitted bubbles, tiny hairs, or dust particles by fishing them out with a toothpick.

7. Cover your resin art

Cover your piece with a plastic bag or cardboard box (with the flaps cut off) and let sit for 24 hours, until dry to the touch.

8. Wait 24 hours

Reveal your piece after 24 hours have passed!

👉TIP: The resin will feel dry after 24 hours. At this point you are absolutely free to hang and admire your artwork on the wall, but if you plan to pack and ship your artwork please allow at least 72 hours for the resin to fully cure.

Stay tuned for our upcoming episodes as we walk you step-by-step through applying ArtResin to ALL your favorite art materials including:

Supplies for making glitter mugs with epoxy

How to spray a mug

How to add glitter to a tumbler

Glue the mug again to seal it with glitter

Setting up the epoxy tumbler turner

Applying the epoxy is the most intimidating part of making glitter mugs with epoxy. So about nine months ago I bought all the supplies and finally worked up the courage to make my first mug.

Before you begin mixing and applying the epoxy, set up your work area where you have some space to work and near an electrical outlet. The epoxy drum turner needs to be plugged in and turned on for 6-8 hours at a time. I used the WRMK Spin It. (It worked fine for me – but I don’t have anything to compare it to as this is my first cup spatula. There are definitely plenty of cup spatulas on Amazon if you’re looking for something different.)

The Spin It Turner allows you to adjust the size of the turner to ensure different cup sizes spin evenly. A tumbler rotating at an angle, off-center, or not completely horizontal can result in epoxy dripping or an uneven application.

Take a paper plate and place it under the spatula to catch any drips of epoxy.

How to mix and apply epoxy to a glitter mug

If you’re wondering what type of epoxy to use for mugs, which is a common question from beginners – I used Amazing Clear Cast brand epoxy. It comes with both epoxy parts that you need to mix together. You can also get it as part of a full epoxy tumbler kit

Be sure to wear gloves and work in a well-ventilated area. For my 20 oz tumbler, I used 10ml of epoxy for each of the layers of epoxy. Pour 5ml from side A into one of the measuring cups and 5ml from side B into the other.

Pour the thicker (Part A) of the two into the small empty mixing cup. Use the popsicle stick to scrape off the sides so you can get as much as possible into the other cup.

Now pour the other 5ml part (Part B), which is thinner and easier to pour, SLOWLY into the thicker part. Use the popsicle stick to stir the two parts together. Stir slowly to avoid bubbles. Keep stirring until the epoxy is no longer cloudy and is clear.

(Note: You should have duct tape on your mug by this point. I didn’t have enough hands to take photos at the same time, so these pictures were taken after the duct tape was removed.)

Continue pouring epoxy and smoothing it over the mug while the mug rotates until all of the epoxy is on the mug and the mug is completely covered. Turn on your cup spinner so that it spins fairly slowly and start pouring the epoxy onto the cup. Use your other hand or one of the silicone brushes to smooth the epoxy down the length of the mug. Continue pouring epoxy and smoothing it over the mug while the mug rotates until all of the epoxy is on the mug and the mug is completely covered.

Once all of the epoxy is on the cup, continue rotating the cup. Wait about 5-10 minutes and carefully (and with gloves still on) remove the tape from both the top and bottom. If you leave the tape on, seal it under the layer of epoxy at the end.

Sanding and Adding Vinyl to a Glitter Epoxy Tumbler When the tumbler is finished rolling, the epoxy will likely still be a bit tacky. You can take it off the drum turner and let it dry for a few more hours until it’s no longer sticky.

Use 180-220 grit sandpaper to sand down the glitter cup. That part seemed super scary to me. Suddenly my beautifully shiny glitter mug looked all scratched and dull. I sanded enough that it was relatively smooth.

Use rubbing alcohol on a cotton ball or towel to really wipe the mug down.

If you wish to add a vinyl decal, do so now. i cut this

Allow the cup turner to slowly rotate the cup for 6-8 hours. When the mug is finished rolling, the epoxy will likely still be a little sticky. You can take it off the turner and let it dry for several hours until it’s no longer sticky. Sand down the glitter cup with 180-220 grit sandpaper. That part seemed super scary to me. Suddenly my beautifully shiny glitter mug looked all scratched and dull. I sanded enough that it was relatively smooth. Use rubbing alcohol on a cotton ball or towel to really wipe the mug down. If you would like to add a vinyl decal, do so now. I cut this So Fontsy peacock onto holographic self-adhesive vinyl. The weeding took a bit, but it was totally worth it.

Adding a second coat of epoxy to seal vinyl on a tumbler

Now you need to add a second and final layer of epoxy. Repeat the same steps from tapping the edges to mixing the two parts epoxy to rotating the cup for another 6-8 hours. How to seal the vinyl on the mug!

This time, when you remove the mug from the spatula, let it sit for a few more hours to fully harden.

The epoxy cup should now be smooth and glittery. Don’t grind the mug this time!

This time, when you take the mug out of the mug turner, let it sit for a few more hours to fully harden. The epoxy cup should now be smooth and glittery. Don’t grind the mug this time!

It’s certainly not perfect… but for my first try – I’m happy with how it turned out!

Remember that vinyl glitter mugs are not dishwasher safe and must be hand washed.

I couldn’t have gotten through my first cup without the help of

It’s certainly not perfect… but for my first try – I’m happy with the result! Remember that vinyl glitter mugs are not dishwasher safe and must be hand washed. I wouldn’t have made it through my first mug without the help of Andrea from Designs by Andrea. She’s a pro at glitter mugs… so if you’re like me and you probably are and are done with mugs, at least we know where to snag one!

Get Silhouette School lessons delivered to your email inbox! Choose Once a day or Weekly.

If you are into crafts that require patience, making a homemade glitter mug is for you. I have to admit that I only recently made my first stainless steel mug with vinyl and glitter and learned a thing or two. Considering it can be an intimidating project, I thought I’d pass on what I learned making my first glitter mug in this beginner’s tutorial. Having basically been a professional hobbyist for more than six years, I don’t usually check my supplies before starting a project. As Bob puts it, “What more could you ask for?” (I started along the Glowforge trail but he stopped me at the dryer vent…) Anyway, you definitely need to make sure you have all the supplies – and there are plenty – before you start making a custom one to make glitter cups. Along with At Least Three Days, here’s a list of what you’ll need for your first mug: Unless you want to use an entire bottle of glitter to completely cover your mug, it’s a good idea to spray paint it first .Use a similar color spray paint as the glitter you want to use. If you spray first you can use less glitter and if the glitter doesn’t cover well in certain areas it won’t really stand out due to the spray paint. Before painting the mug, use painter’s tape to wrap the entire top and bottom of the mug. If you’re working on the top of the mug, line up the tape so it rests halfway on the lip and fold it then down on the inside to protect that area The tape is well sealed and there are no creases or places where paint could possibly bleed I filled my mug with paper towels so paint didn’t spill into the mug while painting . Now to spray a mug you need to use a light hand or you will end up with drips and uneven paint. I had an 11 year helper and ended up with a big drip BUT luckily after one coat of glitter and two coats of epoxy I can’t even tell where the journey is. So don’t worry if you get a drip. If you really want to make sure you’re spraying the mug without drips, you can place it on some sort of extension pole device and rotate the end of the pole/turner by hand while you’re spraying paint. Let the spray paint dry really well before proceeding. Don’t remove the tape…which I didn’t realize until the next step was a terrible idea… There are several ways to add glitter to a custom tumbler – I went with the Mod Podge method. You can also use a thin layer of epoxy which I’m sure would give you a much more even layer of glitter. Regardless of what you choose, it’s easiest to add the glitter when the mug is on a spinner (and if you have duct tape protection). top and bottom of the cup) so it is horizontal when you pour the glitter. For the Mod Podge method, I didn’t have the spinner moving while we worked, but we manually spun it as we worked our way around the cup. Take a piece of printer paper and fold it in half. Place the paper under the spinner to catch the glitter. The crease makes it easy to tip the excess back into the glitter jar. You’ll have to work fairly quickly to ensure the mod podge doesn’t start to dry or the glitter will be difficult to stick. Use one of the silicone brushes to (which should be) apply a thick, even coat of Mod Podge all over the mug. Pour the glitter in sections, making sure to cover the entire surface of the mug while rotating it by hand. Try to make the glitter layer as even as possible. The best glitter for mugs is a high quality glitter that is colored throughout and not just on the surface. That’s so if you sand your mug in a few steps, the glitter will retain its shine even after it’s sanded. If your glitter mug looks like mine (he tried) when you’re done, don’t worry, you can add more Mod Podge and glitter in a second round. Allow the glitter and mod podge layer to dry for several hours or even overnight. Now you want to seal the glitter layer with Krylon Clear Coat Spray. I used two coats and brushed off any uneven large areas of glitter. This will only help keep all the glitter sealed enough so that when you add epoxy in the next step you don’t put glitter all over it. Wait a few hours for the mug to dry really well before proceeding with epoxy. Remove the tape from around the top and bottom of the mug and replace it with new strips of painter’s tape on the top and bottom. This second set of tape should be placed so that a LIGHT stainless steel area is visible between the glitter and the tape. This small area will be covered with epoxy in addition to the rest of the mug NOT covered with tape. Applying the epoxy lightly over (top) and under (bottom) will completely seal the glittered area.

PaintTopics.com is a participant in the Amazon Services LLC Affiliate Program, an affiliate advertising program that allows websites to earn advertising fees by advertising and linking to Amazon.com

This post may contain affiliate links. We may receive a small commission from purchases made through them at no additional cost to you.

If you love glitter like us but hate the mess, you’ve come to the right place. Glitter makes a fantastic addition to almost any craft project, from decorating vases to clothing. However, if you don’t seal it properly, you could end up living in a sea of ​​glitter forever. In this tutorial, we’ll give you all of our top tips for sealing glitter so you can have the sparkle without the mess.

Search for quality materials

Are you a high-end crafter or are you looking to work with glitter for the first time? Regardless of your experience level, you need quality crafting materials to create beautiful projects. We’ve rounded up some of the best glitter sealers and glitter to give you some ideas.

The best glitter for your sparkle

There are thousands of different types and brands of glitter and knowing how to choose between them can be difficult. The size of your glitter particles will affect the final look of your project. There are generally six different glitter sizes available.

Ultra fine glitter

The smallest ultra-fine glitter available becomes a sparkling haze when thrown in the air. The particles are so small you can’t see them and using this glitter on any project gives a sparkling yet smooth look. We typically recommend using ultra-fine glitter for projects that you’ll be looking at closely. You could lose the dazzling beauty of your glitter work all over the room.

You’ll find ultrafine glitter in all shades of the rainbow. Despite its beauty, ultra-fine glitter can be a nuisance because it gets everywhere. Ultrafine glitter is one of the more expensive types of glitter, but it makes a big difference.

Extra fine glitter

Slightly larger than ultrafine glitter, this glitter size is still incredibly small. At first glance, it can be difficult to tell the difference between extra fine and ultra fine glitter. You can see the difference most clearly on the price tag. Extra fine glitter is much more economical. We recommend using extra fine glitter if you want your project to shimmer without any obvious glitter particles showing.

The fashion industry often uses extra fine glitter for accessories such as hair clips, belts, bracelets and handbags, among other things.

Fine glitter

With fine glitter, the particles are more visible. Fine glitter is by far the most popular type of glitter. Ease of use, excellent coverage, easy cleaning, and wide range of colors make this glitter the best option for arts and crafts projects, party decorations, and more. Fine glitter is much easier to clean than the extra-fine and ultra-fine varieties, but you lose the incredible shine that these smaller options offer.

Medium glitter

If you want to cover a larger area with glitter, such as B. costumes or theater props, medium glitter is the best option. The larger particles mean you can see the glittering shine from up to three meters away. The color palette is narrower on medium glitter, but it’s so much easier to clean and the price is lower.

Big glitter

Big glitter is perfect for projects that people will see from afar. The sparkle of these larger glitter particles is similar to how light reflects off water. For floats, street signs, and large-scale performances, you can’t go wrong with big glitter. Just like the medium glitter, the color range is smaller, but the price is low, and this glitter has fantastic visibility.

Extra large glitter

When we say this glitter is big, it really is. Each particle is a quarter inch square, and this glitter has the appearance of tiny mirrors. You cannot apply this extra large glitter in the same way as the smaller sizes. You can sprinkle the glitter on a flat surface or stick each particle individually. It is possible to see the stunning glitter effect from up to 20 feet away. Event planners love using this extra large glitter as confetti and it’s great for outdoor applications. Cleaning is by far the easiest with extra large glitter.

Our recommendation for the best glitter brand: LUXAX luxury glitter set

This set of 30 different glitter colors and sizes is a fantastic option for those who are just starting out with glitter or looking to add to their collection. The glitters in this kit are non-toxic and perfect for any craft project. The set is also quite affordable so you don’t have to spend a lot of money to have fun with glitter.

Advantages Wide range of colours, sizes and shapes

non-toxic

Good quality

Affordable Cons Can be messy to use

The best seal

There are a few different ways you can stick your glitter onto your project and then seal it to prevent it from falling out. You can use mod podge glue, pour-on epoxy coating, or spray-on glaze to seal your glitter. We’ve provided our best suggestions for each of these options below.

Our recommendation for Mod Podge: MOD PODGE Gloss

This all-in-one water-based sealer, glue and finisher has so many uses aside from making your glitter stick. You can use a traditional mod podge to seal in your glitter, but this glossy finish will add that extra sparkle to your finished product. If you’re familiar with Mod Podge, you know that the milky glue dries clear. You can use Mod Podge on almost any surface including paper, wood, plastic and paintings.

Mod Podge is water based formula and when it dries it is permanent and waterproof. Mod Podge typically dries within an hour, and since the formula is water-based, you can easily wipe away any mess with soap and water. You can color the Mod Podge by adding acrylic paint, water colors or dry pigment. Sometimes Mod Podge can get a little sticky when drying, but you can apply an acrylic sealer over it to eliminate this.

Pros An affordable option

Multiple uses for a single product

Fast drying

Dries clear with a glossy finish

Waterproof when dry

Easy to clean

Can be colored

Suitable for a range of surfaces Disadvantages Can dry sticky at times

Our recommendation for Pour-on Epoxy Sealant: ENVIROTEX Lite Pour-On High-Gloss Epoxy

This high quality epoxy coating is perfect for glazing almost any flat surface. The finish is professional, glass-like and smooth with just a single pour. This seal is heat resistant, waterproof and solvent free. With this sealer you can protect your glittering surface indoors or outdoors. A single pour is comparable to about 60 coats of paint, making this a very effective product. However, over time, this Envirotex coating may begin to yellow if exposed to direct sunlight.

Benefits Fast and easy to use

Versatile for use on multiple surfaces

Heat and water resistant

Solvent-free

High gloss finish

Suitable for outdoor use Cons Requires mixing of two parts

May yellow when exposed to sunlight

Our recommendation for spray-on glaze sealer: KRYLON Triple-Thick Crystal Glaze Spray

If you’re looking for an easy-to-use glitter sealant spray with a high-shine finish, you won’t regret using the Krylon Triple-Thick Crystal Glaze Spray. This glaze is so versatile that you can use it for pottery, paper mache, collage, and more. The glaze is incredibly fast drying and feels dry in just 15 minutes. In two hours the glaze will be completely dry.

Once dry, this glaze seal is permanent and will not crack. A single coat is equivalent to about three coats of other spray finishes. You also use less of this sealant because the spray tip creates less overspray and you don’t have to press it down as hard as other brands. This single 11 ounce spray can cover up to 20 square feet of surface.

Benefits Easy to use

Versatile

Fast drying

High gloss finish

Doesn’t crack Cons Could be a bit more expensive

A step-by-step guide to adding and sealing glitter

The way you apply and seal glitter to your project depends a lot on the medium you choose. Would you like to add a sparkling shine to a glass vase or spice up an old piece of clothing? Everything depends on this question, from the preparation of your project to the aftercare.

First things first: prepare for the glitter

Before you even pull that pot of glitter out of the closet, there are a few things you can do to make the whole process that much cleaner. Choose a designated work area that you can easily clean up after using your glitter. We recommend using a smooth surface as there is nothing more annoying than having glitter stuck in the grooves of your table.

Also, make sure your workspace has an easy-to-clean floor. Stay away from the carpet. An essential element of your glitter workspace should be some sort of tray. You can use this bowl to catch glitter that won’t stick to your project when sprinkled. A tray also allows you to store excess glitter for next time.

How to seal glitter on glass and other solid surfaces

A little glitter is such a fun way to restyle an old vase, but only if the glitter stays where it is. In this section we give you all the tips and tricks for applying and sealing glitter on your glass project. If you want to know how to seal glitter on glass, there are a few different methods you can use.

Paint with Glitter Mod Podge

This method of adding and sealing glitter on glass is quick and easy. You can also use this method to avoid a lot of the mess that comes with sprinkling glitter. You can use this glitter paint on glass and many other surfaces. For this project you will need:

Your favorite glitter in every shape and thickness

A good quality mod podge

A foam brush

Your cleaned glass object

Mod Podge is the best glue for glitter and this method really is as easy as it could be. Just mix your mod podge and glitter until it looks like glittery paint. The higher the ratio of glitter to mod podge, the better it shimmers and covers. Then, using your foam brush, brush the glittery mod podge mixture onto the surface of your jar, making sure to evenly coat the entire surface. This method of adding glitter to glass works just as well on any other smooth surface, including wood and plastic.

You may need to apply a few coats depending on how much glitter you’ve added to your mod podge and how much coverage you want. If you want to apply additional coats of glitter glass paint, wait for each coat to dry completely before applying the next. Mod Podge can sometimes have a sticky finish when dry.

Also, the mod podge can dull the glitter shine sometimes. If this is the case and you don’t like it, you can use a clear spray sealer like Krylon’s to give your project a nice smooth and glossy finish.

Sprinkle glitter on your project

The other method of glitter adhesion and sealing also uses Mod Podge or a similar glue. You’ll need the same equipment for this method as the one above, and you’ll definitely need a tray to catch the glitter. This method of glitter application creates a much smoother finish with more sparkle since you are not mixing your glitter into the glue.

Start by brushing Mod Podge or your chosen glue onto the surface of your object with your foam brush. Place your glue covered object on your tray and sprinkle your chosen glitter over the glue covered area. Make sure the entire mod podge is covered in glitter and allow this layer to dry.

If you want your glitter coverage to be strong and opaque, you can repeat the process with another layer of Mod Podge and glitter. It is very important to make sure your first coat is dry before adding the second.

Once you’re happy with the opacity and shine you’ve achieved with your glitter application, it’s time to seal it. You can use a final coat of Mod Podge to seal your glitter as this glue dries clear. By using the high gloss mod podge you can achieve a really nice and shiny finish. However, as we’ve said before, the mod podge can get a bit sticky when drying, so we recommend using a spray-on glaze sealer to finish your piece.

How To: Add and Seal Glitter onto Fabric

Adding glitter to an old pair of jeans or a jacket is a fun way to breathe new life into them. However, it’s a bit more difficult to ensure your glitter stays on the fabric than gluing glitter to glass. The main reason it is difficult to add glitter to clothing is that it can interfere with the glitter when washed. The products you use on your fabric will make or break the durability of your glitter work. There are two ways to seal glitter onto fabric.

Use a permanent fabric glitter spray

Our first and safest way to seal glitter onto fabric is to use a permanent fabric glitter spray. Manufacturers make these glitter sprays specifically for use on fabrics. As a result, they are much more effective than other options. Just follow the instructions on the packaging and you’re done!

Our recommendation for permanent textile glitter spray: TULIP Glitter Spray Paint

Tulip fabric permanent glitter spray can be sprayed, spritzed or spritzed onto any fabric. This method of sealing glitter onto fabric comes in a range of different colored glitters and is a lot less messy than sprinkling glitter. The color and glitter will not fade even after multiple washes, which is a major benefit. This product is like glitter and a glitter sealant spray all in one.

Using a permanent fabric glitter spray like this also means you can easily use a stencil to create a unique pattern. All Tulip glitter fabric sprays are eco-friendly and non-toxic. The glitter spray dries quickly and creates a really nice sparkle and shimmer. This method of gluing glitter to fabric works best on light-colored fabrics.

TULIP Glitter Spray Paint Colors work best on light colored fabrics

Can be squirted, squirted or sprayed

Soft, flexible and will not disappear after repeated washing. View on Amazon

Benefits Less chaos

Eco-friendly and non-toxic

Easy to use

Can spray, splash or splash

Durable even after repeated washing

Radiant colors

High Gloss Sheen Disadvantages Works best on light colored fabrics

Seal glitter with hairspray

If you have a glittery top or other piece of clothing that will sprinkle glitter all over your house, you can use fabric glue or hairspray to quickly seal in the glitter. If you need a quick fix, hairspray is a fantastic option for sealing glitter onto fabric. Chances are you already have hairspray around your house and it dries quickly. You can use hairspray as a quick fix to seal glitter on the fabric, but it comes out with dry cleaning, so it’s not a permanent option.

Be sure to take your garment to a well-ventilated area. Lay your fabric on a clean and flat surface and spritz a light coat of hairspray onto the glitter you wish to seal. It’s best to hold the can of hairspray about four inches from the fabric for the best coverage. The hairspray dries fairly quickly, but doesn’t last long.

Seal glitter with fabric glue

For a more permanent glitter seal, you can use durable fabric glue. The process is very similar to that used with Mod Podge on other surfaces. Place your garment on a clean and flat surface. When adding glitter and sealing, smear your fabric glue onto the fabric in your desired pattern and sprinkle with glitter. Allow your glittery fabric to dry for a long time (about 24 hours) before applying your sealing layer of glue.

Our recommendation for textile glue: ALEENE’S OK to Wash-It textile glue

Made in the USA, this fabric glue is a great option for attaching glitter to fabric. The textile adhesive is permanent, quick-drying and washable. The glue takes about 24 hours to fully dry and you will need to wait seven to 10 days after gluing your fabric for the first time to wash it to give it adequate drying time. We also recommend only washing these garments inside out and on delicate cycles to maintain longevity. Unfortunately, this fabric glue is not suitable for very thin fabrics such as satin, silk and rayon.

ALEENE’S OK to Wash-It Textile Glue Durable and quick drying

Can be washed after 7-10 days on gentle cycle

Not suitable for thin fabrics such as viscose, silk and satin. View on Amazon

Advantages Fast drying

Continuous

Can be washed Cons Must be washed on delicates

Not suitable for thin fabrics

Now you know how to seal glitter, but what can you add glitter to?

The items you can add a little sparkle to are absolutely endless. From party hats to Christmas decorations, we believe a little glitter can make a world of difference. You can jazz up some old hair clips with a glitter mod podge mix or create awesome glitter wrapping paper the same way. Spice up your phone case with a unique glitter pattern or add some excitement to your bulletin board with some glitter thumbtacks.

Add a dazzling glow to your step

Our favorite DIY glitter suggestion is to spice up an old pair of shoes with some glitter. You may be wondering how to seal glitter on shoes. You can make the glitter paint out of Mod Podge and glitter and paint it on the shoes. You can also paint the mod podge directly onto the shoe and sprinkle it with glitter.

You can use this second option to create some beautiful patterns by painting the mod podge with colored glitter at different times for different sections. Once you’ve applied your glitter to your shoes you can seal it with more mod podge or use the Krylon Sealing Spray. The possibilities are endless once you know how to seal glitter on shoes.

frequently asked Questions

How can I keep glitter on Christmas decorations?

Many of our favorite Christmas decorations have a beautiful sheen that can fade over time. Luckily, it’s very easy to seal the glitter onto your ornament. You can brush a thin coat of a shiny Mod Podge over the glitter areas and let dry. Alternatively, you can use a glitter sealer like Krylon’s Glaze Spray for a permanent high-shine finish.

Can you seal glitter on wood with hairspray?

No, we do not recommend using hairspray to seal glitter on a wood project. While this will work in the short term, hairspray is not a permanent option and will begin to yellow over time. Try using spray-on glitter sealers like Krylon’s or a light coat of Mod Podge for a more effective and long-lasting seal.

Does Mod Podge seal glitter?

Mod Podge is a fantastic and affordable option for sealing glitter onto almost any surface. You can use Mod Podge to stick the glitter to your project and seal it with a second thin coat. If you want a glossy finish, we recommend trying Mod Podge with a glossy finish.

What is the best glue for glitter?

The answer to this question depends on what you want to glue glitter to. If you are going to glue and seal glitter to fabric, we recommend using Aleene’s Permanent Fabric Glue. If you’re adding glitter to an old pair of shoes, glass, wood, or just about any other surface, we recommend using Mod Podge. Mod Podge is highly effective and will hold your glitter firmly in place.

Can you really drink from the cups?

Absolutely! The cups are coated inside and out with a clear resin lining. The coating covers your entire mug and protects the wood from whatever you drink.

Can they be used for hot drinks?

Yes indeed. Hot coffee, tea…

Can I put it in the dishwasher or microwave?

Unfortunately, these mugs are not dishwasher or microwave safe. Microwaving or machine washing your mug could damage it. This damage would not be covered under my warranty.

How do I wash my mug?

You should hand wash your mug with warm, soapy water. Avoid using the rough side of the sponge when washing as this could dull the finish.

Is there anything else I need to do to take care of my cup?

The cups do not require any special care. Simply fill with your favorite beverage, beverage, hand wash and repeat.

So, about this guarantee?

Most of my mugs come with a lifetime guarantee against spills. (The exception is my travel mugs, which are covered by a 1-year warranty). If anything goes wrong with your mug, all you have to do is let me know ([email protected]) and I will fix it. You can read the details of the guarantee here.

If I dropped my mug, can you still fix it?

If you’ve dropped the mug (or sat on it, or driven a car over it, or put it in the dishwasher) I can usually fix it for you. Since these issues are not covered under warranty, a small fee will be charged for repairs. The fee depends on the damage but rarely exceeds $30.00. If you need a repair just contact me ([email protected]) and we’ll take care of it.

What do you coat your cups with?

We use a food grade, FDA compliant resin to fully encapsulate our wooden drinking vessels. This is a proprietary resin formulated to meet our unique needs. You won’t get a taste of either the resin liner or the wood underneath. Nothing you drink will penetrate the lining or the wood.

Do you accept custom orders?

No, not at this point.

How to eliminate fish eyes and pinholes in epoxy coatings

Substrate contamination is the most common problem causing fish eyes and pinholes in epoxy sealant coatings. Dust, dirt, wax, silicones and even the oil from your fingers from touching the part before epoxy sealing prevents epoxies from lying flat and curing with a perfectly smooth surface.

Any contamination on the substrate (in the case of surfboards, the fiberglass lamination) disrupts the surface tension and causes the epoxy to delaminate or pit. The epoxy will “run away” from the contaminated area.

Proper preparation is key for a nice, smooth epoxy sealer coat.

Top 5 Tips for Eliminating Epoxy Fisheye, Pinholes, and Separations:

1. Perform your epoxy work in a clean, well-ventilated area with minimal airflow that can bring contaminants into your work area.

2. Wipe the substrate with denatured alcohol (DNA) on a lint-free rag to pick up most of the contaminants and oils that may be on your work piece. Allow the denatured alcohol to evaporate completely before applying an epoxy sealer coat.

3. Wipe the work piece with an epoxy sealer prep wipe. This will pick up any additional dirt or grime to leave a clean surface for the epoxy coating to apply to.

4. Use a clean bristle brush, foam or napped roller, or squeegee to apply your epoxy coating.

5. Let the work piece be at the same temperature as the epoxy resin to avoid thermal shock and rapid shrinkage of the resin and orange peel. When hot resin meets a cold substrate, the rapid temperature change causes the resin to curl and not flow properly.

After preparing to apply your epoxy sealer coat, it is important to avoid introducing contaminants into the first stage “green” epoxy cure.

1. Do not touch the wet epoxy sealer coat – Walk away from it and come back about 10 minutes later to assess any discrepancies in the coat. Even walking around the work piece can kick up dust and debris that will settle into your epoxy sealant coating and cause a pinhole or fish eye. Just let the resin flow and flatten it out for a while.

2. Come back to the fresh seal coat and assess if there are any small problems. Even with proper preparation and cleaning, fish eyes can occur due to environmental issues beyond your control. If there is a problem with your epoxy sealer, simply drip some resin left in your mixing bucket onto the affected area and allow the resin to flatten out on its own and combine with the surrounding resin molecules.

3. Do not paint over inconsistent epoxy sealer coating areas as this will most likely reduce surface tension and result in a larger fish eye or separation. A dab of extra epoxy is all you need on the area to solve the problem.

In summary, the right epoxy sealer depends on your work environment and preparation efforts. Following the guidelines outlined above will greatly improve the flatness, gloss and uniformity of your epoxy coating.

If you want to incorporate your passion for drinking glasses into an online business at home, you need to start a drinking glass business today. The best thing about starting a tumbler business is that you can start it entirely online and scale exponentially with little to no investment. But that doesn’t mean you don’t have to put in a lot of work to get your tumbler business off the ground. The good news is – we’ve put together everything you need to know to get your own tumbler business up and running.

1. Familiarize yourself with the mug industry

In order to start a successful work from home tumbler business, you need to understand the ins and outs of the tumbler. Not only does this make starting a tumbler business easier, but it also massively helps you in scaling the business. The best part about starting a tumble-from-home business is the small investment. You don’t need expensive machines to make mugs. It’s all about design and aesthetics. As the drinking glass business is growing rapidly, you should keep up with the current trends in the drinking glass market.

Things You Need to Start a Tumbler Business

The exact things and equipment you need to start a tumbler business will vary based on many factors. For the sake of simplicity, I’ll focus on the materials needed to start a simple glitter mug business. From there you can expand and add to your collection to create and sell different styles.

1. mug

There are a few things you need if you are a complete beginner and have never made a mug before. Stainless steel drinking glasses are the first thing on this list. You can also use glass, but I recommend stainless steel because it’s more durable and generally lasts longer. Make sure you don’t spend more than $50-$60 on mugs to get started.

2. Glitter Glue and Brite Tone

Glitter Glue is used to apply and seal in your glitter, followed by multiple coats of Brite Tone to achieve that glossy, long-lasting finish. The base of your mug consists of universal white and pigments. If you get the pigments, you can make your own colors! To give your mugs a base coat, you can use spray paint instead. Getting all of this will set you back up at around $150.

glitters

Another thing you need is high quality glitter. You want it to be high quality polyester glitter so it has a bright shine and doesn’t dull or bleed. Make a budget of $30-$50 to start with glitter. However, I warn you that buying glitter is addictive. As a result, you will most likely end up spending more than that.

water slide and tattoo paper

These can be printed directly from your computer onto a special sheet of paper, or purchased ready to use! You need a printer if you want to print your own! So let’s say you need somewhere between $20 and $50 to start with these images.

vinyl

Vinyl is the most commonly used material for customizing drinking glasses. Many tumbler shop owners actually only run a vinyl tumbler shop. This requires the use of a vinyl cutting machine. The machine, plus the vinyl and transfer tape, will cost you several hundred dollars. So if you don’t already have one, consider how much it could cost you. But if you already have one because you’re a handyman, you can use it along with the vinyl you already have.

Miscellaneous

You can set aside about $50 for other various consumables like brushes, popsicle sticks, mixing cups, etc.

If you don’t know how to make mugs, I highly recommend you to make a pattern by following the DIY tutorials on Youtube before starting a mug business.

Familiarize yourself with the cost of starting a tumbler business

You could start a basic-level tumbler business from home for about $800-$1,200 (assuming you don’t have supplies). An extra $500 to $1,000 could get you off to a great start. That being said, if you want to scale up your tumbler business, it can cost you anywhere from $8,000 to $10,000 depending on the scale of the manufacturing and marketing strategies implemented.

Keep in mind that the cost of starting a Tumbler business at a base level of $800-$1200 includes supplies ($300-$500) and marketing costs ($500). If you really want to go cheap, you can buy as you grow. If you don’t mind a little hard work, the Tumbler business is one of the best businesses to start and grow.

Is the Tumbler Business Profitable?

The tumbler business is incredibly profitable when done right. A custom mug can sell for $35-$40, and the cost of making a mug yourself is only around $12-$15. That means a profit of about $20 to $25 for every cup sold. Even if you only sell about 80 cups a month, you’re looking at a profit of about $2000.

Is a Tumbler Business Worth It?

It is undoubtedly worth starting a tumbler business. The tumbler business is worth trying because it requires such a small investment. Starting a Tumbler business is promising and easy to use and scale. It is an excellent business for teenagers due to the low barrier to entry.

2. Plan your tumbler business

The success of any business depends on its ability to plan ahead. The same goes for starting a tumbler business. Let’s go through some of the most important steps you need to know when planning your tumbler business.

Choose a name for your tumbler business

Whether you want to start a tumbler business or a scrunchie from home business, you need to choose a name that reflects your company’s values ​​and beliefs.

Remember that the legal business name must comply with state naming rules in the states where you intend to operate your business; Otherwise, the state may refuse to accept the documents submitted for the incorporation or qualification of the company. While you’re just starting out, you may not need to register your tumbler business, but following your state’s naming rules will prevent problems in the near future when your tumbler business gains momentum and you want to scale it quickly by registering and branding it .

Shopify’s Business Name Generator is a free tool that you can use to develop brandable names for your Tumbler business. Some of the cool ideas I got from the Shopify Business Name Generator for Tumbler company names are:

Tumbler Addict Small Town Tumbler Paint Splatter Sparkle & Shine Glitter Girls! Berry Blast Citrus Chiller Tumbler Zone Hydro Tumbler champagne bottles

Once you’ve decided on your tumbler business name, there are three final checks you need to make.

First, check your state’s business name database to see if your desired business name is available.

Second, do a domain name search to see if your business name is available as yourbusinessname.com. If it’s available, register the domain before someone else gets it. Namecheap offers domain names for just $0.99 for the first year. You can use the tool below to see if the domain name is available.

Find a domain from $0.88 powered by Namecheap

Finally, do a federal search in the US Trademark Electronic Search System and make sure no one has already trademarked your name.

Write a solid business plan

To start a successful tumbler work from home business, you need at least one solid business plan. Don’t just get into the tumbler business because it sounds fancy and people make a living out of this business.

Ask yourself – what will the USP (Unique Selling Proposition) of your drinking glasses be? What creative ways can you use to attract customers to your company? What is your strategy to keep your existing customers?

A well-written business plan should explain the core goals of your Tumbler business and how you intend to achieve them. One of the other purposes of a business plan is to make your tumbler business appear professional and attractive to potential lenders in the near future.

All in all, a well-written, actionable business plan is a crucial document for your Tumbler business. A convincing business plan has many sections, some of the must-includes when starting a Tumbler business are:

summary

business description

market analysis

competitive analysis

products on offer

Competitive pricing strategy

marketing strategy

financing

financial forecasts

You can use business plan software like BizPlan and Enloop to create a professional looking business plan.

3. How to sell mugs online?

The next step is to get your Tumbler business name online for everyone to see. Websites are a crucial part of starting a tumbler business. You need a professional online store to sell your drinking glasses online.

Make sure you harness the power of the internet. You need to customize your website and align it with your brand. You can post pictures of your drinking glasses and testimonials and make a great impression on your visitors. Also, don’t forget to include your mission statement on your website and tell your customers why they should buy your drinking glasses.

Designing an online store just got really easy. Gone are the days when you had to pay thousands of dollars for a website developer for a small website. Now, thanks to Shopify, you can create a brand new online store for your business from as little as $29. The icing on the cake is that Shopify offers a 14-day free trial (no credit card required) so you can try out the platform. This is more than enough time to set up an online store, upload your products and set up the payment systems.

If you want someone else to take care of the technical details while you focus on getting more customers to your tumbler business, we’re ready to help. Our $199 digital package for the Tumbler business includes a professionally designed online store, custom email, 24/7 support and maintenance, SEO, and digital marketing services. You don’t want to miss the deal. Contact us today before the offer expires.

4. Packaging for your cup business

Gone are the days when packaging was only meant to protect your mug products from damage. Today, packaging has become more of a branding strategy. It builds your brand, conveys information, and sells and protects your Tumbler products. In addition, packaging creates tension and excitement for your cups. Therefore, you need a good packaging strategy when starting a tumbler business. When people see a beautifully wrapped drinking glass, it entices them to open it and creates a theatrical element. All in all, you need to spend time developing an actionable packaging strategy for your drinking glass business. Etsy offers thousands of eye-catching packaging materials for your tumbler business.

5. Promote your tumbler business

Most business owners don’t consider marketing in their business strategy for some reason. This is possibly one of the biggest mistakes and you should not repeat it. The best form of marketing for a tumbler business is word of mouth. Once your mug prototype is ready for production, give the samples out to your friends and family to try. Ask for feedback on your Tumbler, listing what they liked and didn’t like. If they liked your drinking glasses, ask them to tell their friends and family about it. You can also ask them to share your social media pages with their friends.

You can also opt for digital marketing to market your mugs nationally or internationally. Also, join your local chamber of commerce or small business groups in your area and find out what tools other business people are using to market their products and services. If you need help running digital ads for your Tumbler business, contact us. We can provide free advice and resources to market your tumbler business online.

Editor’s Note: This article was originally written in 1994, well before we developed G/flex epoxies that offer far superior performance in bonding plastics including PVC. A much more recent article on this subject is Gluing Plastic with G/flex Epoxy by Tom Pawlak and Jeff Wright. If you’re interested in bonding PVC to epoxy, we recommend starting there. The following article is published on Epoxyworks.com for historical purposes only.

by Brian Knight—Technical Advisor to GBI

Occasionally our customers ask about using WEST SYSTEM® Epoxy to bond PVC (polyvinyl chloride) plastic to another surface. Typically, traditional epoxy does not bond well to many plastics due to the lack of surface structure for a mechanical bond. On some plastics, the epoxy will bead up on the surface like water on a waxed surface. This inability to “wet” the surface is another reason for poor adhesion.

But with the right surface preparation it is possible to achieve excellent adhesion on many plastics. Because the prep varies from plastic to plastic, I tried different surface preps on the PVC to find one that worked well with WEST SYSTEM 105 resin based epoxy.

To know how well epoxy adheres to PVC I used the PATTI gauge (Pneumatic Adhesion Tensile Testing Instrument). This tester measures the pressure required to remove “pull stubs” from a substrate. In this case, the stubs were bonded to a PVC flat sheet using WEST SYSTEM 105 Resin and 205 Fast Hardener.

The table below shows the different methods of preparing the PVC surface before gluing the stubs. As you can see, two methods have given good results.

PVC cleaner and PVC glue

Of the two methods that gave the best results, the easiest preparation was to use standard PVC cleaner and glue. These materials are available wherever PVC plumbing accessories are sold.

First I cleaned the plastic surface with PVC cleaner and then applied a thin film of PVC glue and wiped off the excess. The PVC adhesive serves as a primer for WEST SYSTEM epoxy and significantly improves adhesion to this plastic. Make sure you use a very thin film of the PVC adhesive and let it dry before applying the epoxy.

flame oxidation

In the flame oxidation method, all surface contamination is removed with a solvent and the surface is then heated with a propane torch. (Note: Use caution with an open flame near a solvent. Many solvents are highly flammable, so ensure that all traces of solvent on the plastic surface have evaporated. Remove the solvent container from the work area before using the propane torch. Work in a well-ventilated area.) When done correctly, the open flame will heat the surface of the plastic without melting it. This will thermally oxidize the surface of the PVC, allowing the epoxy to chemically bond to it. With the right lighting, you can see how the gloss of the PVC surface changes as the flame sweeps across it. It becomes a little less shiny. Play the flame quickly across the surface, making sure the flame touches the entire surface. Don’t let the plastic melt. This method gives the best results with the PATTI meter, but is the most difficult method to achieve consistent results. It’s also impractical for large surfaces.

Both of the above methods allow you to bond PVC sheeting or PVC pipe to any substrate that is compatible with WEST SYSTEM Epoxy.

I am currently working on the coating for the base of the plant watering sensor. I’ve tried a wide variety of techniques and materials. At the moment epoxy seems to be the perfect material choice – so I try different resins and hardeners to get the best results.

Some hardeners are very reactive and produce a very strong exothermic reaction. While I am meticulously reading and preparing everything for a new process, as usual, I sometimes experience very nasty surprises.

For the process, I dip the foot pieces into the epoxy and hang them up to dry. To minimize wasting epoxy I used very small plastic cups for dipping.

The exact material of these plastic cups is very important as I have learned. You should never use anything that will react violently with the mixed epoxy as you can see in the next picture.

The cup literally caught fire after a few minutes and I had to drop it outside on the forecourt to avoid a disaster. In the picture you can see the remains of the process: A beautiful frozen block of epoxy, in the middle of the melt. The cold outside air quickly cooled the process, so the burning stopped.

Notes for the next experiments:

Only use cups that you know the material of.

If you run a stopwatch against the pot life, assume a time that is 20% shorter than stated.

Prepare an evacuation/meltdown plan. 😉

recent posts

This post may contain affiliate links. We may receive a small commission from purchases made through them at no additional cost to you. You help to support resin-expert.com

If you are planning to use epoxy for a project, it is important to know what materials epoxy will or will not stick to. The last thing you want is for your project to end in disaster, so make sure you research the material you plan to use thoroughly. Consider the pros and cons of each material. In this article we will discuss what epoxy and resin don’t get along with.

What does epoxy resin not correspond to? Here are a few known materials that epoxy will not bond to:

parchment or wax paper

Sheathing or tuck tape

silicone, vinyl or rubber

hot glue

plastic, sandwich bags

Most plastic containers

polyethylene plastics

There may be many more materials that epoxy will not bond to, but the list above should be good enough to get you started. Keep in mind that there are a few things to consider when using these materials, all of which affect the curing of your epoxy.

So let’s take a look at these materials and what you need to consider when working with them.

parchment or wax paper

Resin will not stick to parchment or wax paper making it ideal for use in resin DIY projects.

Advantages:

Wax paper is very cheap and so easy to use. You can use it to cover a Live Edge or Natural Edge table or to make a simple mold for small tables.

Disadvantages:

This method has some disadvantages. During the curation process, the finish is not as clear as with other methods. It may be cloudy as wax gets into the epoxy from the paper. The wax paper also may not stay in place properly. Moving the wax paper can cause problems while the epoxy is curing.

sheathing or painter’s tape

Since epoxy doesn’t stick to the tape, jacketing is the ideal material. Once you have made your product and the resin has fully cured, you can easily remove the tape.

Advantages:

It is a very inexpensive method and works very well. By using the tape you can make an item that is the same size as your product. It not only allows you to make different shapes and angles, but also keeps the shiny appearance. Use correctly, then reusable.

Disadvantages:

Unfortunately, this method leaves an imperfect article as it will have a lot of seams. Luckily, you can sand and polish it after it’s cured. Note that the work surface needs to be flat as this will directly help ensure your item is flat. If you are making a large mold, it may take longer to complete.

silicone, vinyl or rubber

The most popular mold among DIYers are silicone molds because epoxy doesn’t stick to them. It can be used for small items such as jewelry, coasters, or to make many other distinctively shaped items.

Advantages:

Silicone molds give you the freedom to create a variety of shapes that would otherwise not have been possible, you can even make your own mold. You can use these molds to create any specialty item you want using only the amount of epoxy you need. These molds are heat resistant and should be within your budget. Silicone is very inexpensive and will give you a perfectly formed item, is inexpensive and requires very little touch up once cured.

Disadvantages:

There are very few downsides except for one noticeable one. These types of shapes cannot be used for larger items like desks, tables, etc. Better read all the reviews before you buy your mold. Notice that the surface of the shape is glossy.

Forms used as ice cream or baking trays do not have a high-gloss finish. Gloss is important as it helps your item to be easily removed from the mold once curing is complete. You may be able to use it as a resin mold, but you must discard it after use.

hot glue

Advantages:

It has great application for making your molds and sealing cracks. Especially when making river tables, it can be used to stop overflowing the area where you want to pour.

Disadvantages:

It cannot be used alone, but together with other materials to allow you to achieve a perfectly finished product. It can be difficult to remove from rough wood and can also leave marks.

Plastic containers: does resin stick to plastic?

You may be wondering does plastic stick to plastic? Plastic containers are ideal as resin will not stick to plastic. This includes containers such as bowls, Tupperware, plastic cups, etc.

Advantages:

This is a simple and inexpensive method and can be used by anyone. This allows you to make bowls of various sizes, paperweights, and any unique shape of your choice.

Disadvantages:

This option requires you to accept the result of your article as it cannot be changed or modified. It also cannot be used for large items such as As tables are used.

polyethylene plastics

Polyethylene plastic is used in the manufacture of many resin molds so it is a great material as epoxy cannot stick to it allowing you to easily remove your item from the mold.

Advantages:

You will receive a reusable and high-quality item. It can be used for table forms or similar items. This is the most expensive method and is usually only used by professionals when making Rivertables.

You can order the exact size you need, as well as the strength or durability you need. Cutting boards are commonly made from it, but only by people who don’t seem to have any concrete ideas about their epoxy.

Disadvantages:

Polyethylene is the most expensive option. This is a method that demands mastery and requires time to learn and understand. You need to know the density, required size and take the time to collect everything you need.

Glass: Does resin stick to glass?

You may be wondering if resin will stick to glass, and indeed it does. It combines with glass and therefore can be used to create amazing glass products.

Advantages:

You can make a variety of beautiful things by combining epoxy or resin with glass. You can make beautiful sun catchers, unique stained glass, and use them as grout on tabletops to fix a cracked floor tile—all without having to lift the tile off the floor to replace it.

Disadvantages:

However, there are exceptions as epoxy will not stick or bond to ceramic tile. The reason for this is that ceramic tiles have a coating that prevents epoxy from sticking to it. However, you can easily sand the surface of the tile and your epoxy will stick to it.

worktops and tabletops

When you start this project, cover the work area with plastic sheeting about 3mm thick. Economical and durable, this material is easy to attach to the surface. The plastic can be removed once the epoxy has cured. A cheaper option is to use a garbage bag and just cut it open. Be careful as plastic sheets can melt if you leave your hot epoxy mixing cup on the plastic for too long.

You can use a melamine board to get this job done properly. Apply 2 or 3 coats of Automotive Paste Wax (it contains Carnauba) which provides a non-stick and fairly hard surface where plastic tends to slip and move.

summary

Every product is different; Therefore, you need to take your time and determine the application for each product. The above list should be of great help, otherwise do some research to find it

exact type of shape or material suitable for your specific project. We offer a range of ideas as well as some free tutorials to give you step-by-step instructions.

frequently asked Questions

If I have epoxy that has already cured, will another layer of epoxy adhere to it?

No, as no cured epoxy surface will allow chemical bonding for another layer of epoxy. However, you can sand it down and then another layer of epoxy should adhere to it.

Unfortunately, this will not result in a permanent and reliable project. If you want to continue, use 180 grit sandpaper on the surface. Clean the surface properly and it should provide a chemical bond for you to complete your epoxy project.