Car Wrap Heat Gun? Best 66 Answer

Thanks to advances in vinyl car wrapping technology, it is no longer prohibitively expensive to completely transform the look of your car, especially if you plan to do it yourself. Vinyl car wrapping can cost as much as painting if you go the professional route, but patience and a steady hand can ensure that even a full car wrap goes smoothly for a do-it-yourselfer. In fact, the necessary tools are readily available and require no special licenses, training, or experience. Basic color changes, even multiple colors, don’t add much to the overall cost of the project, but custom graphics, prints, or finishes can increase material costs. Still, the finished product can be particularly stunning.

The nature of vinyl car wrap lends itself to temporary applications. With proper care, a high-quality car wrap will last five to seven years, maybe even ten years. This can be undesirable for permanence, but temporarily can be perfect for certain drivers. You might want to change up the look again in a few years, or sell the car—little old ladies might not like those oh-so-metallic graphics. In any case, removing vinyl car wrap requires only a few basic tools and supplies and doesn’t degrade the original finish in the slightest. In fact, the Original Equipment finish will be better than a similar vintage since vinyl car wrap blocks paint-damaging UV light, preserving your vehicle’s resale value.

It is often asked whether a hair dryer can do the same thing as a heat gun when it comes to shrinking. In this guide, we explain the purpose of a heat gun, whether a hair dryer can be used as a substitute for a heat gun, and which one is best for shrinking.

What is the purpose of a heat gun?

A heat gun is a portable device used to eject a stream of hot air, with temperatures generally varying between 100°C and 700°C. Heat guns usually take the form of a handgun, but some in-line models are also available. Different models of heat guns, operating at different temperatures and airflow, are used for a number of different applications including paint stripping, packaging shrinking, plastic bending and welding, adhesives, and heat shrinking. In some cases they are also used in electronics work for desoldering and refinishing circuit board components.

How hot is a heat gun?

Most heat guns have a minimum temperature of around 100°C and the peak temperature generally reaches 500°C. However, there are some professional heat guns that reach up to 700°C. For household jobs like paint stripping, a heat gun only needs to be around 200-400°C. The temperature required for shrinking varies depending on the shrink film; in general, however, about 100-200°C is required for this.

What is the difference between a heat gun and a hair dryer?

Heat guns and hair dryers have very similar functions but are used for completely different applications. Hair dryers are of course used to dry your hair. Because of this, the maximum temperature delivered is much lower than that of a heat gun. A normal hair dryer has a maximum temperature of around 140 °C. Heat guns are used for applications such as shrinking and paint removal, so temperatures are much higher than that of a hair dryer and vary between 100ºC and 700ºC.

Can you use a hair dryer instead of a heat gun?

Since hair dryers and heat guns have very similar functions, you can also use a hair dryer instead of a heat gun for certain applications. When removing labels/stickers, candle wax or similar tasks, a hair dryer can be used instead of a heat gun. However, if you use it regularly for this type of task, it will quickly overheat and become damaged, since of course that is not the purpose of its construction.

Heat guns are designed to perform these hot air application tasks to a high standard and therefore deliver a more concentrated airflow than hair dryers. Because of this, heat guns are much more efficient as they don’t disperse the air like a hair dryer, which has a wide airflow instead of a narrow one like a heat gun.

How does shrink wrap work?

Shrink wrapping is the method of wrapping an item in a plastic film. The foils can be either clear or printed and form an envelope around the object. The film is sealed by direct heat. It is most well known among car wrappers who apply shrink wrap to cars to change their color and appearance. The best tool for this type of work is a heat gun, not a hair dryer.

Can you shrink with a hair dryer?

Running your hair dryer on the hottest setting can probably get you some desired shrinking results. However, using a hair dryer to apply heat shrink tubing takes a long time and the results aren’t as good as using a heat gun. The maximum temperature of a hair dryer is 140°C, while the maximum temperature of a heat gun is around 700°C. This heat differential is the difference between a professional looking shrink wrap and a huge time saver. In general, the full activation temperature of heat shrink tubing is above 140°C.

What is the best heat gun to buy?

The best and most suitable heat gun that we offer for the shrink application is the Steinel HG 2120 E heat gun. This heat gun and its accessories have become so popular with car wrappers that Steinel has developed its very own car wrapping set. This set includes the HG 2120 E hot air gun and the HL Scan, a high-quality temperature scanner.

The Steinel HG 2120 E hot air gun is electronically controlled with a 7.5 m long cable and is ideal for car wrapping. Its steplessly adjustable temperature ranges from 80°C to 630°C and can be set to 9 levels using the thumb wheel. The ergonomic handle with a soft insert enables safe working with just one hand.

If you are looking for an inline heat gun as opposed to the standard hand gun shape, the Steinel HG 2620 E is your best option. This 2300 watt heat gun features digital joystick temperature adjustment from 50°C to 700°C and a brushless motor that lasts over 10,000 hours.

Here you can buy our entire range of heat guns, including those from Steinel and Leister.

Why not check out our other tool guides?

The DeWalt heat gun has a variable temperature control, two fan speeds and two nozzles, so it’s designed for a variety of different tasks around the home. It also features a rugged, shock-resistant body; an extra long cable; and a comfortable ergonomic handle to prevent fatigue after hours of use.

The tool is compact, lightweight, durable and easy to use. It heats up quickly and puts out a constant heat of between 120 and 1,100 degrees Fahrenheit. It features a cable protector that prevents it from fraying or breaking where it attaches to the gun. The built-in overload protection prevents the tool from overheating and burning. It also has a built in stand for stability and a hanging ring so you can store it away with ease.

Unfortunately, this heat gun is not the best option for industrial use. It may also take a while for the tool to cool down. In addition, the settings are printed very small and difficult to read. Also, it doesn’t show the operating temperature.

This article is about the power tool. For the non-lethal directed energy weapon being developed by the US military, see Active Denial System

Example of a portable electric heat gun

Commercial heat gun kit

Flame heat gun for helicopter shrinking

A heat gun is a device used to emit a stream of hot air, typically at temperatures between 100°C and 550°C (200-1000°F), although some hotter models can run at around 760°C (1400°F). to be held by hand. Heat guns usually take the form of an elongated body pointing toward what is to be heated, with a handle attached at right angles and a pistol grip trigger in the same pistol shape as many other power tools.

While it shares similarities with a hair dryer, it is not intended as a replacement for the latter, which safely distributes heat through its nozzle to prevent scalp burning and has a limited temperature range, while heat guns have a concentrated element and nozzle , along with higher temperatures that can easily scald the scalp or set the hair on fire.

construction [edit]

A heat gun includes a heat source, typically an electrically heated element or propane/LPG, a mechanism for moving the hot air, such as a fan. B. an electric fan if the gas pressure is not sufficient; a nozzle to direct the air, which can be a simple tube pointing in one direction, or specially shaped to concentrate heat to a small area or to thaw a tube but not the wall behind it; an enclosure to house the components and protect the operator; a mechanism for switching on and off and controlling the temperature, such as B. a trigger; a handle; and a built-in or external stand if the weapon is to be used hands-free. Gas powered soldering irons sometimes have replaceable hot air gun tips to create a very narrow stream of hot air suitable for working with surface mount devices and shrinking heat shrink tubing.

Focused infrared heaters are also used for localized heating.

usage [edit]

Heat guns are used in physics, materials science, chemistry, engineering, and other laboratory and workshop environments. Different types of heat guns, operating at different temperatures and with different airflows, can be used to strip paint,[1] shrink tubing, shrink wrap, and shrink-wrap packaging, dry damp wood, bend and weld plastic, soften adhesives, and much more thawing frozen pipes.[2]

Heat guns, often referred to as hot air guns or hot air stations for this application, are used in electronics for desoldering and reworking surface mount circuit board components. Heat guns are also used to functionally test overheat protection devices to safely simulate an overheat condition.

The use of heat guns in the home is widespread. Heat guns and lighter hair dryers are sometimes used to remove paint spatter and wallpaper. Heat guns are also used to make plastics like PVC pipe pliable for bending, to soften wax and glues like those used in electronics, and to thaw frozen copper pipe. There are also heat gun form factors that are suitable for food use, e.g. B. for melting candy, searing meat or lighting a charcoal fire or grill. Heat guns are sometimes used for upholstering furniture and repairing leather and vinyl goods.

Temperatures below 590°C (1100°F) are used to remove lead paint to minimize evaporation.[3]

See also[edit]

References[edit]

“Here you will find the best heat guns, shortlisted after several hours of testing and analysis.”

Heat guns are versatile hand tools that are useful in a variety of applications from carpentry, arts, crafts to electronics.

The heat from heat guns can strip paint, thaw frozen pipes, remove stubborn labels, bend plastic, and more.

They work in a similar way to a hair dryer, but produce more hot air in a higher temperature range.

Before investing in a heat gun, we recommend considering these key factors.

temperature range –

The temperature range of a specific heat gun tells you what type of work you can use. For example, heavy-duty jobs like plumbing and paint stripping require a heat gun with a temperature of 120° – 1100° Fahrenheit. While DIYers for household projects will need a heat gun rated at 392° – 752° Fahrenheit. Therefore, before buying, check the temperature range.

Temperature setting –

An adjustable temperature is essential when working with a wide variety of materials. Basic models have a single temperature setting, but the modern ones offer 2 – 3 different temperature settings, allowing you to set or control the temperature range or fan speed based on your work needs.

Nozzles –

These are the attachments that allow the heat gun to focus the heat on the object in a controlled manner. There are different types of heat gun nozzles for different purposes. Since most of the heat is discharged at the tip of the nozzle, it must be made of solid metal to withstand the heat and stress of using the gun.

Although they are a bit dangerous, you can accidentally get burned or melt things. Therefore, it is important to choose the model that is designed with security in mind. Here is a list of some heat guns that are perfectly safe to use for various applications.

In addition, we have put together all the important information for buying your best heat gun in our detailed buying guide.

The 7 best heat guns of 2022

The 7 best heat gun reviews

The SEEKONE 1800W heat gun offers tremendous power and is capable of heating up in seconds. It has a wide temperature range, with built-in temperature control and overload protection.

One of the most important things about dual temperature heat guns is that they require a rheostat heater with safety measures in place. The black dial on the heat gun allows you to control the heat of the tool and also make adjustments to the airflow control.

With a temperature range of 120 degrees Fahrenheit to 1200 degrees Fahrenheit, the heat gun is capable of meeting most DIY project needs. Unlike other dual temperature heat guns on the market, the SEEKONE offers variable temperature control. The ergonomic design allows the user to avoid strain injuries that often occur when using other heat guns. The 1800w heat gun is capable of shrink wrap, mobile phone repair, PCVV heating, floor tile paint removal, heating, defrosting and other purposes. The kit comes with a fitted nozzle and three additional interchangeable nozzles so you can work on any surface. It also comes with a reflector to help you spread heat evenly across surfaces.

What we liked

High output power

Additional nozzles included in the kit

overheat protection

stand

Ergonomic design

What we didn’t like

Not suitable for projects with low output power

Long warm-up time

Bottom line: If you’re looking for a heat gun kit capable of wrapping cars, shrinking PVC, or removing rusted bolts, the SEEKONE Heat Gun 1800W is a versatile tool to pick. The even heating mechanism paired with the built-in safety measures offers a great DIY experience.

Buy now on Amazon

The Wagner HT1000 heat gun is one of the best tools available for removing paint, loosening rusted screws, working on phone repairs and more. The Spraytech’s ease of use is second to none and is one of the most popular options with DIY enthusiasts.

There are two temperature settings that you can switch between depending on your needs. The corrosion-resistant nozzles ensure that you can use the heat gun for a long time without overheating problems.

With a temperature range of 750 degrees Fahrenheit to 1000 degrees Fahrenheit, the heat gun was built to last. In terms of performance, there are no issues when the tool is used at higher temperatures for longer periods of time. You can use it for complex projects using the additional accessories and nozzles that are included. With an offered 2-year warranty, Wagner users are protected against all manner of manufacturing issues or defects. One of the great features of the heat gun is that it can be used hands-free. You can use the stand to work on your projects without ever touching hot surfaces that can create work hazards.

What we liked

high heat

Two year guarantee

Hands-free operation

Complicated security measures

Corrosion-resistant construction

What we didn’t like

Not suitable for thawing

No wireless capabilities

Bottom Line: If you’re looking for a heat gun with adjustable fan settings, the HT1000 is one of your best options. It features an integrated kickstand for safe and hands-free operation, making it one of the easiest tools to use on the market.

Buy now on Amazon

The Genesis GHG1500A is one of the best 1500/750w heat gun kits on the market. It comes with an air reduction nozzle and makes adjustments depending on the project. You can switch between three temperatures to get the results you want.

Most DIY projects that require precision and care require the proper built-in safety measures. The GHG1500A is equipped with overload protection to ensure you don’t injure yourself or damage the work surface you’re using the tool on. The package contains several accessories, including additional nozzles and reflectors. There is no need to invest in additional products as this is an all-in-one package designed to give you premium quality and versatility.

The stand makes using the GHG1500A a breeze. You can make adjustments between low, medium and high settings to get your desired temperature. The heating element of the heat gun is equipped with a temperature protection to ensure that you do not accidentally touch the heating element and hurt yourself. When it comes to design, Genesis has outdone itself with great protections and added customization in the mix. The RC motor available in the heat guns is extremely powerful and can heat up the nozzle in seconds so you can start your project as soon as possible.

What we liked

RC motor for high power output

Bundled nozzles for all kinds of DIY projects

Comes with reflectors

Suitable for all work surfaces

What we didn’t like

Loud at high temperatures

Small heating element

Conclusion: If you are looking for a heat gun that does not require lighter fluid to heat and self-heat, this is one of the best kits to go for. The adjustable airflow and temperature controls make it one of the most versatile and effective heat guns on the market.

Buy now on Amazon

The DeWalt D26960K is a heat gun with a built-in LCD display that makes most DIY projects extremely handy. The LCD screen lets you check the current temperature and make adjustments in 50-degree increments.

Most complex projects require a high level of care. The automatic overload protection of the D26960K enables precise work on projects. There are 12 accessories that come with the product, including extra nozzles, meaning you don’t have to buy extra nozzles for different projects.

The heat gun will shut off if it overheats. Using the D26960K is very convenient thanks to a kickstand that allows you to make easy adjustments for stability. The heating element is protected all around so you don’t accidentally touch it. The ergonomic and lightweight design ensures that the D26960K is easy to control even when working on precision driven projects. Nozzle options include cones, fishtails and scraping. You can swap in and out different nozzles to get the right adjustment you need. The heat gun also comes with a carrying case so you can take the tool and its accessories with you wherever you go. If you use your heat gun a lot and want maximum versatility, this DeWalt product is one of the best options out there.

The DeWalt D26960K is a versatile tool for DIY projects that require adjustable airflow and temperature.

Buy now on Amazon

Pulde’s efficient heat gun is an ideal choice for all types of DIY projects. It has undergone a drop test and an aging test to prove that it offers drop protection and can work continuously for 500 hours.

It features powerful turbofans that allow the gun to heat up in a matter of seconds, which can boost your work speed. In addition, the gun has built-in overload and overheat protection to prevent burning and ensure safe and reliable use. Unlike other conventional guns, the Pulde heat gun uses ceramic heating elements instead of mica elements, improving safety and service life.

This compact gun measures 9.06 x 3.15 x 7.87 inches and weighs only 1.9 pounds, making it easy to carry. It features a non-slip handle for better grip throughout the job and its flexible hose protects the cable from damage caused by tangling. The 1200W heat gun is ideal for paint stripping, PVC shrinking, phone repairing, crafting and many more heating and thawing activities.

What we liked

Ultra tough

Safe and durable

Wide application

Dual temperature control

Ergonomic design

What we didn’t like

No tote bag

Conclusion: This is a delightful tool to own at an amazingly low price. If you are looking for a perfect air pistol with adjustable temperature settings, then this model is for you. You can choose the most suitable temperature between low 752℉ and high 1112℉.

Buy now on Amazon

The Xpeoo Heat Gun Kit is a versatile option with 10 multi-purpose attachments for a variety of uses. It has 5 nozzles, 1 paint scoop and 4 paint scoop attachments.

The heat gun adopts hands-free operation design with flat and black back cover to keep it upright when working. This ensures that the heat gun does not fall and burn nearby objects.

Rated at 2000W, the heat gun has 2 gears to control the temperature settings. You can adjust the temperature between 5720F and 10220F to heat the tip according to your purpose. The heat gun heats up in seconds so you can do all your DIY tasks. It is perfect for shrink wrap, heat shrink tubing, epoxy, cell phone repairs, electronics repairs, tube thawing, vinyl wrap and paint stripping.

What we liked

High output power

Large temperature range

Comes with additional attachments

Hands free design

Safe to use

What we didn’t like

No tote bag

Not suitable for heavy use

Bottom Line: This heat is a multi-purpose tool that will suit all of your DIY needs. Besides, the high power output and hands-free design make it a very convenient and effective tool.

Buy now on Amazon

There are very few cordless heat guns that offer the power and versatility of their corded counterparts. The Milwaukee Electric Tool 2688-20 is one of the best deals out there when looking for premium portable heat guns.

The first thing you will notice about the Milwaukee heat gun is its premium build quality and its glowing LED that makes it easy to work even in low light. It’s one of the best high-end products out there that comes fully loaded with customizable temperature settings and other key features.

One of the best things about the 2688-20 is that it’s able to switch between its dual temperature settings very efficiently. It only takes 7 seconds to be ready, which is very impressive considering most heat guns take up to a minute to be ready before they can be used.

The lightweight and portable design of the 2688-20 heat gun is very impressive. The airflow in the device is quite large and although it is portable, the battery does not heat up even with prolonged use. The kit comes with a carry case, and you also get access to some of the best nozzles that you can swap out for easy access. Whether you want to remove paint or use the tool for other purposes, the portable heat gun is capable of it all.

What we liked

Efficient heating time

Illuminating LED light

wireless capabilities

The battery does not heat up even at high temperatures

Stand for hands-free use

What we didn’t like

No tote bag

Requires additional third-party nozzles for versatility

Conclusion: If you are looking for a lightweight and portable heat gun for your DIY projects, this is definitely the right choice. Its wireless capabilities make it one of the best tools out there, and the fact that it stays extremely cool despite being wireless is impressive. With an operational efficiency rate of just 7 seconds, it gets a thumbs up from us.

Buy now on Amazon

Buying advice for heat guns

Heat guns are versatile tools that are very easy to use. If you have access to a good heat gun, you can do DIY projects at home without needing professional help. Typically you want to look for a heat gun that has the right mix of features, including interchangeable heads, an LCD display, and preferably a lightweight design. Safety features are often overlooked, but they must be available to prevent any type of work hazard.

The three types of heat guns that you can buy online include gas powered heat guns, infrared heat guns, and electric heat guns. Industrial heat guns can also be used but are not needed for simple home projects. Electric heat guns are the most convenient for most users due to the temperature control and lack of flammable liquids to power them.

How to choose a heat gun:

A perfect heat gun should have the right mix of features including best quality, lightweight design and safe use. In this ultimate buying guide, you learned how to choose the right heat gun based on your job needs, without sacrificing safety features related to job hazards.

Let us know what factors to consider when buying a heat gun.

1. Temperature range:

It is essential to check the temperature range of a heat gun before buying it. This range will inform you about the type of work that you can do with this heat gun.

For example, use a heat gun that has a temperature range of 120°F – 1100°F to get heavy jobs like plumbing and paint stripping done with ease. For DIYers who do daily household projects, such as A heat gun with a temperature range of 392°F to 752°F may be required for tasks such as softening the adhesive on floor tiles or shrinking plastic.

Most modern heat guns allow you to adjust the temperature to get different types of tasks or projects done without overheating issues.

2. Temperature control:

A perfect heat gun can do a variety of jobs, especially one with adjustable temperature output is a must when dealing with different materials.

Typically, base models operate at a single temperature. This is where the gun heats up to its maximum temperature, and to adjust the heat simply move the gun away from or closer to the targets. While advanced/modern heat guns offer 2-3 different temperature settings that allow you to adjust the heat to low, medium and high depending on your needs.

Variable temperature heat guns offer a dial to select the correct temperature between the low (minimum) and high (maximum) range. Some modern heat guns are equipped with electronic displays that allow you to set the exact temperature required and adjust it in 50°F increments.

Choose a heat gun with a detailed fan and temperature controls for precise heat adjustment and to get the job done effectively.

3. Fan speed:

Fan speed tells you the area of ​​the surface that a heat gun can hit. A lower fan speed model is perfect for precision projects like removing labels or de-soldering. On the other hand, a model with a higher fan speed contributes to a better heat distribution over the entire area. If you move a heat gun running at low fan speed quite far from the target, the temperature will drop but the surface area will increase.

So, a powerful fan increases surface coverage without temperature drop, thereby allowing a larger area to be heated at once. Therefore, this fan speed setting is useful when working on larger projects, such as B. de-icing pipes or stripping paint.

4. Airflow Settings:

A fan in the heat gun determines its airflow, which affects user control. With some models, you can therefore adjust the airflow to do your job efficiently. Especially when you need to slow the airflow to avoid melting sensitive components. Alternatively, you will need to increase the efficiency to use the hot air gun’s highest airflow setting.

Similar to the temperature control, the airflow settings have a speed dial that indicates how fast the fan spins in the heat gun. However, airflow is an issue when heating tight spaces or nearby materials receiving the heat. Here the hot air gun must be convertible so that other covered areas do not cause any damage.

5. Nozzles:

Nozzles are attachments that fit onto the heat gun so they can direct the heat towards whatever object you are dealing with. They offer precise temperature control and direct the flow of heat efficiently.

Some of the most popular heat gun nozzles are.

Cone or Reduction Nozzles – Allows heat to be focused on a specific area.

Allows heat to be focused on a specific area. Flat Nozzles – Applicable when dealing with a wide, horizontal line.

Applicable when dealing with a wide, horizontal line. Spoon Reflector Nozzles – Wrap around the pipe to distribute heat evenly around the entire circumference.

Wrap around the pipe to distribute heat evenly around the entire circumference. Glass Protection Nozzles – Used to strip paint off a window by preventing direct heat on the glass.

6. Nozzle quality:

We learned how important nozzles are for a heat gun. Most of the time, heat is given off at the tip, resulting in a large load. Therefore, it must be made of the best quality materials such as solid metal that will not warp or melt. The same applies to the nozzle attachments. As the nozzles that come with a heat gun should have many uses. Therefore, it should be of the best quality to endure stress and heat effectively.

7. Accessories:

Heat guns offer a wide range of accessories designed for precise temperature control and easy, effective use of the gun.

Here are some popular heat gun accessories.

Thermal Cut-Out – Shuts off the heat gun if it becomes overheated.

It shuts off the heat gun when it gets overheated. Dead Man’s Switch – Automatically shuts off power when pressure is released.

It will automatically turn off the power when the pressure is released. Hanging Hook – Used to store the tool.

It is used to store the tool. Surface Stand – Allows you to safely park the weapon while pausing your work. Also, it offers a hands-free option to perform the task that requires two-handed operation. However, make sure that the weapon is stationary and kept away from flammable objects.

This allows you to safely put down the weapon while pausing your work. Also, it offers a hands-free option to perform the task that requires two-handed operation. However, make sure that the weapon is stationary and kept away from flammable objects. LCD Display – A tool with an LCD gives you complete control over its operation. It allows you to adjust the temperature, especially when working on delicate or precise things like PC circuits, mobile phones, etc.

8. Ergonomics:

Ergonomics plays a crucial role in providing safety and comfort to the user as it sheds extreme heat. Most often, heat guns feature pistol grips, which in turn provide the operator with a safe place to rest their hands between work breaks.

Plus, these pistol grips have built-in controls that allow for seamless adjustment changes. We usually notice models with back and side mounted dials. All of this ergonomics has been designed to ensure your hands stay clear of the nozzle. Some models have built-in stands, where some stands turn the heat gun into a hands-free work surface, while other stands help keep tools cool.

9. Additional Features:

Aside from the plethora of heat gun accessories and nozzles, some heat guns offer additional built-in features. Here are some additional features that the heat guns offer.

Some models have extended cord lengths for more freedom of movement.

Some have high temperature protection on the nozzle to keep safe hands.

Few devices offer built-in memory settings to instantly tune fan speed and heat to the exact level needed for the precise project you’re dealing with, such as: B. remove color, with a single keystroke.

Types of heat guns:

Heat guns are mainly classified into four types – gas, electric, industrial and infrared. Regardless of their type, you should be aware that they are dangerous if used improperly. Let us know in detail about them.

Gas Heat Guns –

This type of heat gun uses either propane or butane gas instead of a heating element. They are less popular compared to the electric type for certain reasons. As they are a little expensive and gas canisters need to be purchased and filled to use this heat gun which requires more work than just connecting or charging like an electric model.

Electrical or plumbing professionals can use this gas heat gun when they need to work away from nearby outlets (or) to avoid the safety hazard of using an extension cord. Beyond this professional craft, this heat gun lost its popularity in the home improvement market nowadays.

Electric Heat Guns –

This type of heat gun can be either cordless (battery operated) or wired (AC outlet). They can be small or large, affordable, and are considered a very popular type of heat gun. Fan speed and temperature range can vary greatly by model. Most manufacturers focus on developing electric heat gun technology for use in everyday tasks. As a result, gas-powered heat gun models are losing popularity.

Industrial Heat Guns –

This type of heat gun is quite different from the above two types due to its sturdy construction, higher fan settings and high heat levels. Most often, professionals use this type of heat gun for heavy-duty work in auto repair shops, mass retail factories, and packaging units. Because they’re designed for industrial work, small precision jobs don’t require fine-tuning of fan speed or temperature control.

Infrared Guns –

It’s a new type of heat gun on the market that uses infrared heat. These run effectively to carry out your work safely. It produces a maximum temperature of 1112°F, which is more than enough for various household projects.

Safety tips for using heat guns:

These guns do not use an open flame, but can generate a temperature of up to 1200°F. Therefore, care must be taken when operating the heat gun to avoid burning yourself or damaging the material you are dealing with.

Here are some of the precautions and safety measures to take when using a heat gun.

Do not place the heat gun near or near any flammable or combustible products such as exposed flammable hoods, fluid hoses or fumes, etc.

Make sure there is at least an inch of space between the work surface and the outlet nozzle while operating the heat gun.

Always work with awareness of heat direction.

Be sure to unplug the heat gun, especially if the floor is empty while not using the heat gun.

On all surfaces/subsurfaces, switch off the heat gun frequently before storing it properly.

When using this gun, avoid any cloth or skin contact with the hot metal nozzle.

Allow the heat gun to cool completely before storing.

Never spray anything into the nozzles of the heat gun. Also, don’t look at the nozzle before twisting the heat gun.

Avoid using an extension cord to control the heat gun. This is because overheating can lead to high current draw, thus creating an electric shock or fire hazard.

Make sure to wear protective gloves and eye protection even if you are an expert/professional.

Do not direct the hot airflow at people’s bodies.

Avoid carrying a sample without tweezers while using a heat cartridge. Or face direct heat exposure to the hand.

Never obstruct the airflow of the device or cover the intake grille during use.

Common uses of heat guns:

Heat guns are used for various applications and here we have mentioned some of their common uses.

Remove Wallpaper – Run the gun to soften the glue behind the old wallpaper, making it easy to scrape off.

Run the gun to soften the glue behind the old wallpaper, allowing it to scrape off slightly. Shrink Wrap – A heat gun is used to quickly shrink wrap, which allows it to be used for item storage, retail, gift basket making, etc.

A heat gun is used for quick shrinking of packaging, which allows it to be used for item storage, retail, gift basket making, etc. Abbeizen – Die perfekte Alternative zum schnellen Ablösen von Farbe ohne Verwendung von Lösungsmitteln oder Chemikalien auf umweltfreundliche Weise.

Die perfekte Alternative zum schnellen und umweltfreundlichen Ablösen von Farbe ohne Verwendung von Lösungsmitteln oder Chemikalien. Schrumpfschläuche – Verwenden Sie sie, wenn Sie Drähte verbinden möchten, um ein sicheres und sauberes Aussehen zu erzielen. Zum Beispiel Autoradio-Installationen oder andere Elektronik.

Verwenden Sie sie, wenn Sie Kabel verbinden möchten, um ein sicheres und sauberes Aussehen zu erzielen. Zum Beispiel Autoradio-Installationen oder andere Elektronik. Gefrorene Rohre auftauen – Meistens tritt dieses Problem im Winter auf. Verwenden Sie eine Heißluftpistole, um die Rohre (Innenleitungen) langsam aufzutauen und das Wasser zurückfließen zu lassen. Tauen Sie auch unterirdische Rohre nach einigen Ausgrabungen auf.

Meistens erleben Menschen dieses Problem im Winter. Verwenden Sie eine Heißluftpistole, um die Rohre (Innenleitungen) langsam aufzutauen und das Wasser zurückfließen zu lassen. Tauen Sie auch unterirdische Rohre nach einigen Ausgrabungen auf. Kunststoffschweißen – Genau wie beim Stabschweißen können wir mit dieser Heißluftpistole problemlos zwei Kunststoffrohre befestigen, anstatt verschiedene Klebstoffe zum Verbinden von Kunststoffen zu verwenden.

Genau wie beim Stabschweißen können wir mit dieser Heißluftpistole problemlos zwei Kunststoffrohre befestigen, anstatt verschiedene Klebstoffe zum Verbinden von Kunststoffen zu verwenden. Trockene Farbe – Eine Heißluftpistole auf niedriger Stufe trocknet die neu aufgetragene Farbe in kurzer Zeit, besonders geeignet für kleinere Flächen.

Eine Heißluftpistole auf niedriger Stufe trocknet die neu aufgetragene Farbe in kurzer Zeit, besonders geeignet für kleinere Flächen. Kleber aufweichen – Eine Heißluftpistole ist eine perfekte Option, um alte Aufkleber von Autos oder Möbeln (oder) Preisschildaufklebern (oder) Gorilla-Kleber von Metall zu entfernen.

Eine Heißluftpistole ist eine perfekte Option, um alte Aufkleber von Autos oder Möbeln (oder) Preisschildaufkleber (oder) Gorilla-Kleber von Metall zu entfernen. Entlöten – Sehr nützlich bei der Reparatur von Elektronik wie dem Entlöten von Drähten in einem Schaltkreis (oder) Entfernen von Schäden an der Leiterplatte.

Sehr nützlich bei der Reparatur von Elektronik wie dem Entlöten von Drähten in einem Schaltkreis (oder) dem Entfernen von Schäden an der Leiterplatte. Röstkaffee – Eine kostengünstige Möglichkeit, mit dieser Heißluftpistole Ihren eigenen Kaffee zu rösten.

Eine kostengünstige Möglichkeit, mit dieser Heißluftpistole Ihren eigenen Kaffee zu rösten. Trocknen von feuchtem Holz – Eine Heißluftpistole wird verwendet, um die Feuchtigkeit aus dem Holz zu saugen, während das Holz zum Streichen oder Anzünden vorbereitet wird.

Eine Heißluftpistole wird verwendet, um die Feuchtigkeit aus dem Holz zu saugen, während das Holz zum Streichen oder Anzünden vorbereitet wird. Emboss Heat – Eine Heißluftpistole ist ideal für geschickte Leute, die sie mit Embossing-Pulver, Gummistempeln usw. verwenden können, um hervorragende Prägedesigns zu erzeugen.

Eine Heißluftpistole ist großartig für geschickte Leute, die sie mit Prägepulver, Gummistempeln usw. verwenden können, um hervorragende Prägedesigns zu erzeugen. Anbringen von Planen – Suchen Sie nach einer großen Plane, anstatt eine teure große Plane zu kaufen, dann können Sie mehrere kleine Planen zusammenfügen, um die Plane in der gewünschten Größe zu erhalten.

Suchen Sie nach einer großen Plane, anstatt eine teure große Plane zu kaufen, dann können Sie mehrere kleine Planen zusammenfügen, um die gewünschte Plane zu erhalten. Biegen von PVC-Rohren – Klempner verwenden Heißluftpistolen, um PVC schnell in den gewünschten Winkel zu biegen, ohne Winkelstücke oder Klebstoffe zu verwenden.

Installateure verwenden Heißluftpistolen, um PVC schnell in den gewünschten Winkel zu biegen, ohne Winkelstücke oder Klebstoffe zu verwenden. Scheibentönung – Mit einer Heißluftpistole können Sie Zeit und Mühe sparen, um die Scheibentönung zu entfernen.

Mit einer Heißluftpistole können Sie Zeit und Mühe sparen, um Fenstertönung zu entfernen. Leder- oder Vinylreparatur – Heißluft/Hitze kann Druckstellen oder Falten leicht entfernen. Außerdem repariert es einen Riss im Leder oder Vinyl.

Heißluft/Hitze kann Druckstellen oder Falten leicht entfernen. Außerdem repariert es einen Riss im Leder oder Vinyl. Fleisch anbraten und Marshmallows braten – Wir können eine Heißluftpistole verwenden, um Fleisch anzubraten oder Marshmallows zu rösten, ohne eine Pfanne zu verwenden.

Wir können eine Heißluftpistole verwenden, um Fleisch anzubraten oder Marshmallows zu rösten, ohne eine Pfanne zu verwenden. Lose festsitzende Schrauben/Muttern – Funktioniert gut, um diese verrosteten/festen Schrauben oder Muttern mit ihrer Hitze zu entfernen oder zu lösen.

Frequently asked Questions:

Can you use a hair dryer instead of a heat gun?

They look the same, sound the same, and even work the same. You could almost be forgiven for thinking that a hair dryer (that lives on or under your bathroom counter) could work the same way as a simple heat gun (the one that lives—or should live—in the garage or in a garage). tool box). Finally, both have motor-driven fans that blow hot air over electronically heated filaments. Both are controlled by high/low settings.

But the doubles have one significant difference — while hair dryers can potentially reach 140F at their higher settings, heat guns can get much hotter. Tools First states a heat gun’s temperature range of between 100 and a whopping 1300 F, so you can think of a heat gun as your hair dryer, but only if it was turbocharged and could do serious damage to your face and hair after just a few seconds Exposure.

Care & cleaning of vehicle lettering

Thank you for choosing Mark Your Space, Inc. to wrap your vehicle! We really appreciate your business and hope these graphics will make you and your business more visible for many, many years to come. To achieve this, here are a few quick tips for maintaining and cleaning vehicle graphics so that your vehicle graphics look good for a long time!

VEHICLE TRIM/GRAPHIC DO’S:

Allow the vinyl graphics to fully adhere to the vehicle by waiting at least 72 hours before washing the vehicle after installation. However, if the temperature is below 60 degrees, wait at least 7 days before washing the vehicle. Wash the vehicle if it appears dirty. Contaminants left on vehicle wraps can be more difficult to remove during cleaning. Wash the vehicle with the wrap care kit available from Mark Your Space, Inc. Always rinse with clean water. Allow the vehicle to air dry or use a microfiber cloth. When not using the film care kit, vinyl graphics should be washed with a sponge and a mixture of mild car wash and clean water. Cleaning solutions should be tested on a small section of vinyl graphic before use. Always read the warning labels on car care products to determine if they can damage vinyl. Wipe up spilled fuel immediately to avoid damaging the vinyl and adhesive. Then wash, rinse and dry as soon as possible. If possible, park your vehicle in a garage during the day or at least in a shady place. If your vehicle is outside or parked in direct sunlight for most of the day, be careful not to expose the same side or area of ​​the film significantly more than any other area. If your vehicle wrap begins to discolor or turn brown, contact Mark Your Space, Inc. immediately to remove the vinyl and avoid staining the underlying paint. If you see the film lifting, peeling, or other issues, contact us immediately so we can troubleshoot the issue.

There are also some don’ts when it comes to maintaining and cleaning vehicle graphics, including:

The NOTHING:

Do not wash the vehicle excessively.

Do not wash with brush type car washes as these may damage the film and cause the edges to lift or chip. Dulling or scratching can also be the result.

Do not apply carnauba based wax to vinyl graphics.

Do not use a scraper to remove ice or snow, only use a brush.

Do not use the rear window wipers on window film. Using wipers on window film will void the warranty.

DO NOT pressure wash the vehicle. This will void any warranty. When using a pressure washer, remember the following… Make sure the water pressure is kept below 2000 psi (14 MPa). Keep the water temperature below 80°C (180°F). Use a spray nozzle with a 40 degree wide angle spray pattern. Keep the nozzle at least 300 mm (1 ft) from perpendicular (at 90 degrees) to the graphic. If you hold the nozzle of a pressure washer at an angle to the graphic, the edges of the film may lift.

If you use a pressure washer, note the following…

There is no better partner for heat shrink tubing than a reliable heat gun. They offer excellent control so you can apply heat shrink tubing quickly, evenly and accurately.

If you regularly use heat shrink tubing or need to cover a large area with heat shrink, having your own heat gun is essential.

But if you ever find yourself without a heat gun, there are a few ways you can attach heat shrink tubing to your target.

Just as the A-Team seemed able to solve any problem with a few simple materials, you’ll be able to solve your shrink application problem with a few little things you can find in the office or locally.

Use a hair dryer

You can use a regular hair dryer as if it were a heat gun to activate your heat shrink tubing. It takes a lot longer than a heat gun, especially if you just have a basic hair dryer.

Hold the hair dryer as close to the heat shrink tubing as possible and crack it down to its hottest setting. Make sure you heat the tubing evenly until it contracts to the size you want.

Use a Bic lighter

This isn’t the most professional solution and definitely not recommended in tight spaces. But if you were really desperate and only had a lighter nearby, then it can work quickly and cleanly. Just watch your fingers.

If you want more control and a hotter flame, try a butane gas lighter.

Use a lightbulb

In the worst case, if a hair dryer and lighter aren’t available, you can manipulate the heat shrink tubing and attach it with a hot lightbulb.

Hold the heat shrink tubing near the high power bulb and wait for it to melt.

Use a process heater

Process heaters are larger, more expensive, and less portable than heat guns. But they’re also more powerful and far more efficient when you’re trying to manipulate a lot of heat shrink.

They are particularly useful in process-intensive environments such as B. in production lines when a lot of shrink material has to be attached.

Vinyl Wrap Tips – Cold Pre-Stret

Post heating of vinyl on vehicle wraps

In vehicle wrapping, the most important process is also one of the last, and that is post-heating. But what exactly is reheating and how do you do it? In today’s post, we’ll walk you through this important step in installing vinyl wrap and help you achieve the best possible DIY wrap results every time.

What is post-heat?

Post heating is a technique of heating the vinyl sheet in all areas where it has been stretched to conform to channels and recesses as well as trim edges. Heating allows the adhesive to flow and form a secure bond with the substrate. It also stabilizes the surface of the vinyl in key areas where it has been manipulated. This means it stays firmly down in areas where we commonly see heave or pop. Obviously, the procedure is performed after the film has been applied.

What tools do I need for post-heating?

To successfully post-heat your vehicle wraps, you will need a heat gun and an IR thermometer to accurately measure the temperature required for a successful post-heat. For all non-cast films, the optimal temperature required during post-setting is between 95 and 120 degrees Celsius.

How to reheat like a pro

Make sure the vinyl is securely attached in all cutouts and channels. Make sure the vinyl has not lifted in any area and that there are no air pockets that could cause the film to burn. When applying heat, do so by working on areas that are 8 to 10 inches wide. Pass your heat gun over the vinyl until the required temperatures are reached. Depending on the quality of your heat gun, it may take some time.

Repeat this process over all challenges and recesses. Make sure you don’t miss any small areas. Then apply the same process when you trimmed the edges and areas where the slide overlapped. After the process is complete, inspect the vehicle for defects. The vehicle must then remain stationary for the next twelve to twenty-four hours. This will allow you to harden and the cargo will begin to stabilize.

Step-by-step post-heating technique

Once the foil has been applied, use heat to heat a small 8 to 10 inch area of ​​the foil. Move your heat gun across the film in a sweeping motion. Use your IR thermometer to measure when you reach a temperature between 203 and 248 degrees Fahrenheit. Repeat this process on all cutouts and channels. Let the vehicle film harden in a garage for 24 hours.

Professional results, DIY know-how

By following these steps you will have a vehicle wrap that not only looks great but will stay in place for the life of the wrap. And if you’re just finding this post, be sure to check out our other articles on cold pre-stretching and heat gun techniques to learn the skills of putting vinyl on your car, truck, or SUV.

Why Does Weather Affect Vehicle Wrap Installation Time?

A vehicle wrap is a dynamic marketing tool that allows companies to market their business 24 hours a day thanks to high-quality graphics placed on the vehicle. Auto wrap application experts agree that the best temperatures for successful fleet wrap application are between 60 and 80 degrees. Vinyl wrap adapts to the temperature of the workspace and can become too stiff or too soft if the temperature is too hot or too cold. A professional vehicle wrapper applies car wraps in a dry and temperature-controlled facility. By controlling the temperature of the work area, the company can ensure that fleet wraps are applied in the perfect conditions for high-quality, long-lasting vehicle wraps.

How the surface temperature of the vehicle matters in car wraps

Just like with the three bears and their porridge bowls, when installing a car wrap it also depends on whether the surface temperature of the vehicle is too hot or too cold:

If the vinyl sheeting and the vehicle and work area are too cold, the sheeting will become stiff and difficult to properly conform to the shape of the vehicle. It can also affect how the self-adhesive vinyl adheres and adheres to the curves and surface of the vehicle.

If the workspace and vinyl are too hot, the vinyl will become stretchy, soft, and pliable, making it very difficult to handle. The vinyl can overstretch and cause color variations in the overstretched areas.

As mentioned above, the best temperatures for successful liquor bonding are between 60 and 80 degrees.

Why professional fleet films last longer

Professional fleet wraps last longer simply because they are professionally printed and applied. Vehicle wrapping is not a do-it-yourself project that can easily be performed by the average person. Car wraps can cover the entire vehicle or just half of the vehicle. In any case, the person applying the fleet wraps must consider the entire vehicle, including the curves, door handles, and other areas of the car that affect the look and fit of the wrap on the vehicle. Professional fleet wraps last longer because the installation team knows the proper conditions to install the vinyl wrap and ensures there are no waves or bubbles after installation.

Contact our experienced installation team to install vehicle wraps that can withstand any weather.

Call us at 314-872-3100 for more information

OR

After wrapping your car with vinyl it is important that you remove excess material as it can cause problems when washing or waxing your car or if someone walks by and trips over the wrap.

The first thing you want to do is scrape off any excess vinyl that hasn’t been heated yet. Next you want to use a heat gun to heat the vinyl wrap so it will start to peel off. You should hold the heat gun at least 6 inches away from the object to be heated. Below are some general guidelines for using a heat gun.

Once the vinyl begins to peel, continue to heat all areas of the vinyl until it has completely peeled away. If you don’t have a heat gun, the vinyl can also be removed by spraying it with window cleaner or automotive adhesive remover and letting it sit for 20 to 30 minutes before attempting to peel the film off.

If the material doesn’t come off in one piece, you can reheat the area that didn’t come off and then try to tear or pull it apart. If you are unable to peel off the vinyl, you may need to take it to a professional remover.

What not to do if you’re using a heat gun to remove the vinyl wrap

Never touch the heat gun and then start heating the vinyl. This causes the vinyl to stretch and tear. Do not touch the vinyl while it is hot. This will result in a burned finger and the vinyl film stuck to your finger.

Never hold the heat gun on any area of ​​vinyl for more than 3-5 seconds without moving the gun. If you don’t, it will start bubbling or possibly burn through the vinyl.

Don’t apply the heat too close to the edge of what you want to remove. This is especially true for vehicle doors and tailgates which have many small crevices and parts that were difficult to reach with a heat gun before steam was applied after they were removed and still hot. When applying heat, keep it at least a few inches from the edge of a door or tailgate. This will prevent it from foaming up and shredding the vinyl.

Do not use steam on an inverter. As it heats up to over 200° Fahrenheit, your vinyl will melt and it will be difficult or impossible to remove any adhesive residue left behind.

Don’t use too much heat and don’t take too long to heat the glue (unless you’re happy to repeat for hours). Remember that acetone is your friend and will help remove any residue left behind by the heat gun.

Don’t use too little heat. It may take some time, but if you let it cool for a few minutes (or more) and then reheat it, you’ll eventually be able to peel the stuck vinyl off with minimal effort.

Also, never use a heat gun without using a steam cleaner. This can be just as dangerous if you’re not careful, and it will melt away the adhesive causing your vinyl to lose its shape, resulting in tears or creases.

Do not use oil-based label removers. Getting rid of the oil base with just acetone is almost impossible. Even strong chemicals may not be strong enough. If you notice an odor similar to paint thinner or gasoline, it’s a sign that you’re applying a label remover that’s too strong for the material you’re working on.

Keep in mind that there are just a few of the most common mistakes made with heat guns and vinyl wraps.