Caring For A Stone Staircase? Top 40 Best Answers

Get to know your stone

The first step to proper stone care and maintenance is to understand the geological classification and composition of your stone. this information will help you to identify which cleaning products to use and how best to care for your natural stone. Natural stone is divided into three basic geological classifications according to their respective formation processes: sedimentary, metamorphic and igneous. Also, stones in each category can be either calcareous or siliceous. Limestone consists primarily of calcium carbonate, a chemical compound commonly found in natural stone, shells, and pearls. Calcium carbonate is sensitive to acidic solutions, so mild, non-acidic detergents are recommended. Pebble, as the term suggests, consists primarily of silicates such as quartz, feldspar, mica, etc. As such, a pebble is generally resistant to most acids found in kitchen environments, although acidic cleaning products are still not recommended. as these stones may contain traces of acid sensitive minerals. The table below is a helpful guide:

Simple care tips

To achieve the longest lifespan and preserve the beauty of your natural stone, follow these simple tips:

Coasters: Use coasters under all glasses, especially those containing alcohol or citrus juices.

Coasters: While many stones can withstand heat, using coasters or mats is recommended.

Dusting: Wipe interior floors frequently with a clean, untreated, dry duster. Sand, dirt and grit are abrasive and can damage natural stone.

Mats/Rugs: Mats or rugs inside and outside an entryway help minimize sand, dirt, and grit that can scratch the stone floor. Make sure the underside of the mat or rug is a non-slip surface.

Vacuum Cleaner: When using, make sure the metal or plastic attachments or the wheels are not worn as they can scratch the surface of some stones.

Spills: Immediately blot spills with a paper towel. Do not wipe the area as this will spread the spill. Flush the area with water and mild soap, rinsing several times. Dry the area thoroughly with a soft cloth. Repeat if necessary.

Cleaning:

Clean stone surfaces with a neutral detergent, stone soap or a mild liquid dish detergent and warm water.

Similar to any item cleaned in your household, an excessive concentration of cleaner or soap can leave a film and cause streaks. Follow the manufacturer’s recommendations.

For best results, use a clean cloth mop on floors and a soft cloth on other surfaces.

After washing with the soap solution, rinse the surface thoroughly and dry with a soft cloth.

Change the flushing water frequently.

In the bathtub or other wet areas, soap scum can be minimized by using a squeegee after each use. To remove soap scum, use an acid-free soap scum remover or a solution of ammonia and water (about 1/2 cup ammonia to a gallon of water). Eventually, frequent or excessive use of an ammonia solution can dull the surface of some types of stone.

In the outdoor pool, patio or hot tub area, rinse with clean water and use a mild bleach solution to remove algae or moss.

Cleaning supplies:

Many suppliers offer stone cleaning products.

Products containing lemon, vinegar, or other acids can dull or etch limestone.

Scouring powders or creams often contain abrasives that can scratch certain stones.

Many commercial rust removers (laundry rust stain remover, toilet cleaner) contain traces of hydrofluoric acid (HF). In addition to other minerals, this acid also attacks silicates. All rocks, including granite and quartzite, will be attacked when exposed to HF.

Do not mix ammonia and bleach. This combination creates a toxic and deadly gas.

seal

Sealing is a common step performed on some stones as an extra precaution against staining. In fact, the sealing products used in the stone industry are “waterproofing agents” which do not actually seal the stone but act as a repellant rather than a sealer. The sealing does not make the stone stain-resistant, it makes the stone more stain-resistant. If you consult with your stone supplier, you may find that many stones do not require sealing. However, applying an impregnating sealer is a common practice.

When sealing, remember that sealing the stone does not make the stone stain-resistant, it makes it more resistant to stains.

If a sealer is applied in a food prep area, make sure it is non-toxic and safe to use.

Consult your supplier or gasket manufacturer for the type of sealant and recommended frequency of use.

Spot detection tips

Identifying the type of stain on the stone surface is key to removal. Stains can be oil based, organic, metallic, biological, ink based, dye based, acid based. If you don’t know what caused the stain, consider possible stains that may have been present. Here are some questions to consider:

Where is the stain?

Is it near a factory, catering area, area where cosmetics are used?

Which color is it?

What is the shape or pattern?

What is happening around the spot?

Stain Removal Steps

Surface stains can often be removed by cleaning with a suitable detergent or household chemical.

What type of stain is it?

The following sections describe the types of stains you may need to deal with, the appropriate household chemicals to use, and how to prepare and apply a poultice to remove the stain.

Oil based

(grease, plumbing putty, tar, cooking oil, milk, cosmetics)

An oil-based stain will darken the stone and usually needs to be chemically dissolved so that the source of the stain can be flushed or washed away. Clean gently with a soft liquid detergent containing one of the following: household cleaners, mineral spirits, or acetone.

Organic

(coffee, tea, wine, fruit, tobacco, paper, food, urine, leaves, bark, bird droppings)

May cause a pinkish-brown stain and may disappear after the stain source is removed. Outdoors, when the sources are removed, the sun and rain generally bleach the stains. Clean indoors with 12% hydrogen peroxide (hair bleach strength) and a few drops of ammonia.

metal

(iron, rust, copper, bronze)

Iron or rust stains are orange to brown in color and follow the shape of the staining object such as nails, bolts, screws, cans, flower pots, metal furniture. Copper and bronze stains appear green or muddy-brown and result from exposure of nearby or embedded bronze, copper, or brass items to moisture. Metal stains must be removed with an envelope. (See website for how to use a poultice. Deep seated rusty stains are extremely difficult to remove and the stone may be permanently soiled.

biological

(algae, mildew, lichen, moss, fungi)

Clean with diluted cleaning solution. Use 1/2 cup of any of the following: ammonia, bleach, or hydrogen peroxide and a gallon of water. Reminder: Do not mix bleach and ammonia.

ink

(magic marker, pen, ink)

Clean light-colored stones with bleach or hydrogen peroxide. For dark stones, clean with paint thinner or acetone.

colour

Smaller amounts can be removed with paint thinner or carefully scraped off with a razor blade. Heavy layers of paint should only be removed with a commercial “heavy duty liquid” paint stripper available at hardware stores and paint centers. These strippers usually contain caustic soda or caustic. Do not use acids or flame tools to remove paint from stone. Strippers can etch the surface of the stone; Repolishing may be required. Follow the manufacturer’s directions for use for these products and flush the area thoroughly with clean water. Wear rubber gloves and eye protection and work in a well-ventilated area. Use only wooden or plastic scrapers to remove sludge and curdled paint. Normally, latex and acrylic paints do not stain. Oil-based paints, linseed oil, putty, caulk, and sealers can cause oily stains. See the oil stain section.

water spots and rings

(surface accumulation of hard water)

Polish with dry 0000 steel wool.

fire and smoke damage

Older stone and smoke or fire stained chimneys may require a thorough cleaning. Etching can also occur when the smoke is removed (due to carbonic and other acids in the smoke). Commercially available “smoke eliminators” can save time and effort.

etching marks

(caused by acids remaining on the surface of the stone)

Some materials will etch the finish but will not stain. Others will etch as well as stain. Consult your stone dealer or call a professional stone restorer to refinish or re-polish etched areas.

efflorescence

(a white powder that may appear on the surface of the stone)

It is caused by the deposition of mineral salts carried by water from beneath the stone’s surface. When the water evaporates, it leaves behind the powdery substance. If the installation is new, wipe or vacuum the powder. You may have to do this several times as the stone dries out. Do not use water to remove the powder; it will only go away temporarily. If the problem persists, contact your installer to identify and eliminate the cause of the moisture.

scratches and nicks

Light surface scratches can be polished with dry 0000 steel wool. Deeper scratches and nicks in the surface of the stone should be repaired and repolished by a professional.

With an envelope

Click here for more information or call a Stone Expert (recommended).

Natural stone easy to clean and maintain!

For problems that seem too difficult to manage, consult your professional stone supplier, installer or a restoration specialist.

CMP Stone, a leader in stone cutting and masonry tools in Hallam, Melbourne, Victoria and Brisbane, Queensland since 1991.

View catalog here

For nearly 30 years, CMP Stone has worked with talented Australian stonemasons, sculptors, restorers and other stone enthusiasts to produce world class stoneworking tools in Australia.

You appreciate your beautiful marble countertops in your kitchen or bathroom. But cleaning requires more care than other surfaces. If your budget allows, purchasing a commercial, pH-neutral marble cleaner is probably an excellent investment to ensure the safest method of cleaning your beautiful countertops, let alone one that doesn’t pose any risk of a homemade cleaner scratching or staining etches.

Marble is susceptible to acids, alkalis and abrasives. You’ve invested heavily in your marble surfaces, so a guaranteed safe commercial product is worth the little extra effort. However, for most small cleaning jobs, you can use plain water and a sponge or soft cloth. Hot water works best. Since water is virtually free, this is the cheapest and least risky homemade marble cleaner that you can use frequently.

Baking soda is sometimes recommended as a good homemade cleaner for marble slabs. You can use it, but you have to follow the right procedure to do it safely.

Baking soda as a homemade marble cleaner

Marble is a soft stone made from calcium carbonate. It is slightly stained, dull and scratched. Be careful not to scratch it and do not expose it to acids (such as vinegar) or strong alkaline agents such as ammonia and detergents. Baking soda is alkaline, so use it with caution. It’s also a mild abrasive, so you’ll need to use it carefully rather than applying elbow grease.

Because of these factors, a baking soda cleaner should not be used on marble every day. Frequent use could dull your marble countertop. Never leave baking soda or a baking soda solution in contact with your marble for more than a few seconds.

What you need

baking soda

water

soft clothing

Warning: Never use a scrubber or scrubbing brush on marble.

The Spruce / Ana Cadena

How to clean with baking soda

Sprinkle a little baking soda on the surface of the marble. Gently rub the baking soda into the marble with a soft, damp cloth. You don’t want to scrub as this can damage the surface.

Then rinse with water and dry with a soft towel. Be sure to rinse with water to neutralize the pH and dry thoroughly so the solution does not remain in contact with the marble surface for longer than necessary.

Baking soda is a mild abrasive and a natural disinfectant. However, you must be careful to use it gently on marble surfaces. Light abrasives can still damage soft surfaces. Be sure to wipe off all traces of baking soda so it doesn’t remain in contact with your marble surfaces.

The Spruce / Ana Cadena

Benefits of cleaning with baking soda

There’s no better way to enhance the style and sophistication of a kitchen, bathroom, laundry room or bar than with beautiful natural stone countertops – and luminous marble is one of the most popular choices.

Whether you love the calming serenity of white Carrara with delicate gray veins, or prefer the warmth of Imperial Gold, or are drawn to the dramatic, inky depth and lightning-fast streaks of Black Marquina, marble offers both ambiance and luxury that help homeowners to personalize their spaces.

Of course, natural stone needs some maintenance to keep its beauty and shine. You will need to reseal your marble regularly and be careful to use the correct cleaning products to avoid scratching, etching or damaging the sealer and stone.

Here are safe marble cleaning products that will make your countertops stand out in just the right way.

#1: Good old soap and water

One of the easiest and best ways to keep stone surfaces clean is with a mixture of warm water and mild dish soap. You should make sure that you do not use cleaning products with acidic ingredients such as lemon or lime.

When you’re done cleaning dust, grime and grime from countertops, it’s best to rinse with clean water to remove any remaining soapy residue that could leave a film and dull the glossy shine of the surface.

A wipe with a clean, dry microfiber cloth will ensure no water stains form after cleaning.

#2: Hydrogen Peroxide Solution

Sometimes, no matter how well you take care of your marble countertops, you will encounter stains. If this occurs, there are a few options for a more thorough cleaning.

If you’re dealing with superficial stains, a solution of 12% hydrogen peroxide can help remove stains that soap and a sponge can’t treat.

The caveat, of course, is that you should reserve this treatment for light-colored marble only. You don’t want to accidentally create lighter spots on a dark marble. On the other hand, darker marble is unlikely to stain as often as lighter colored slabs.

#3: Baking soda paste

If stains penetrate the seal and get into the porous stone of your countertop, you may need to try to pull them out. The best way to do this is with a baking soda solution. All you do is add water to baking soda until you reach a thick, creamy consistency.

Next, apply the paste to the stained area of ​​the countertop, cover with plastic wrap and tape the edges. Leave it on for up to 24 hours, then wipe the paste off to see if the stain is gone.

If some stains remain, you can repeat the process. However, stubborn stains may need to be removed by a professional

#4: Special Stone Cleaner

There are many natural stone cleaners on the market, but the best offer a few key features.

While you may be drawn to expensive products made specifically for marble, any natural stone cleaner that has a neutral pH will get the job done.

The beauty of spending some money on stone cleaners (as opposed to using dish soap) is that these solvents offer a one-step process. Simply spray and wipe to clean countertops – no rinsing and drying required.

You can also find products to help maintain the seal, potentially delaying the need to re-seal the surface.

#5: Microfiber towels

In addition to choosing the right solvents to remove dust and dirt from your marble countertops, you need to use the right equipment. Sponges are fine, but for best results use gentle, lint-free microfiber cleaning cloths.

These high-end rags are not only ideal for removing dirt and germs, they also absorb more liquid so you won’t leave water stains that spoil the shine of polished surfaces.

Microfiber also stands up to prolonged use, providing you with a longer-lasting cleaning product.

Most importantly, these cleaning wipes are incredibly gentle so they won’t damage your sealant or scratch countertop surfaces. They also reduce bacteria.

In truth, keeping your marble beautiful is not as difficult as you might imagine. When you’re ready to find marble countertops for your home, the team at Academy Marble & Granite will help you discover the perfect variety and slab. Start by browsing our portfolio for design inspiration.

How to clean a marble shower

Marble can enhance the look of any room, and since no piece of marble is the same, it can add a touch of uniqueness to your bathroom. Whether it’s marble countertops, marble floors or stone tiles, it’s important to clean them regularly to keep the surface looking beautiful.

Marble begins its formation as limestone, so when used in showers and wet areas it can be corroded by hard water deposits. Because of this, it’s important to wipe down your marble shower after each use to remove soap scum and minerals from hard water.

Never use acidic limescale removers, lemon, vinegar or citrus-based soaps to clean a marble tile shower. Because marble is such a soft natural stone, acidic cleaners can attack and damage the sealer that protects the stone.

Also, avoid using bleach or ammonia products on marble as these will dull the glossy finish over time.

A pH neutral cleaner like Simple Green All Purpose Cleaner is perfect for cleaning shower floors, shower walls and other delicate marble bathroom surfaces. The powerful cleaner dissolves stubborn stains and water stains without damaging the marble.

You’ll need to clean marble grout, floor tiles, and walls a few times a week if the shower is used more than once or twice a day. If it’s only used once or twice a day, you might be able to get away with cleaning it once a week.

This varies depending on the design of your floors. Using vinegar on some hardwood floors will damage the finish. While it’s best to use a cleaner specifically formulated for cleaning varnished hardwood floors, Cameron says your floors should be fine if you heavily dilute the vinegar with water or other cleaning products. However, if you don’t want to take that risk, a safer DIY solution is a mixture of liquid detergent and water. Bet you didn’t know you can use baking soda in so many ways around the house.

7/7

Natalia D/Shutterstock

beads

Pearls are composed of marble, limestone and calcium carbonate. When exposed to vinegar, the calcium carbonate in the pearl reacts with the acid in the vinegar and dissolves. To avoid damaging your pearls, Cameron recommends cleaning them with a soft cloth dipped in a solution of lukewarm water and mild dish soap. Next, read about these cleaning mistakes that can contaminate your home.

Next, check out these money-saving vinegar cleaning hacks.

How to clean a natural stone shower

Natural stone materials such as slate, limestone, granite, marble and onyx are available in a wide range of colors and patterns to suit a variety of bathroom designs. Soapstone, travertine, and granite work best for showers because they are less porous compared to marble.

The hardest part about cleaning a natural stone tile shower is keeping the white, cloudy suds under control.

It might seem like the right idea to use acidic cleaning products like vinegar and ammonia to break up stubborn product build-up and limescale. These have extreme pH levels that will eventually break down all sealers, scratch stones and eventually cause discoloration.

Natural stone should be cleaned once a week with a pH neutral cleaner such as Simple Green All Purpose Cleaner. The powerful cleaner dissolves stubborn dirt and deposits without damaging your beautiful stone surfaces and removes soap scum, body oils and fats, bath oils, soap and shampoo oils.

In addition to regular deep cleansing, you can avoid suds build-up by removing excess water after each shower. Use a squeegee or microfiber cloth to remove any remaining water stains and leave the shower looking sparkling clean.

It’s also important that you seal natural stone shower surfaces to prevent water, oil and other liquids from seeping in and leaving stains. Stone sealing does not make surfaces stain-resistant or waterproof; It only offers stain or water resistance for ease of surface maintenance. Seal every few years or whenever you notice water isn’t beading on the surface.

Each editorial product is independently selected, although we may receive compensation or receive an affiliate commission if you purchase something through our links. Ratings and prices are correct and items are in stock at the time of publication.

1/10

Best for hardwood floors

Many floor cleaners contain harsh chemicals that can stain and damage wood. Bona Hardwood Floor Cleaner is a water-based, pH-neutral formula that is safe to use on unwaxed, unoiled or polyurethane-coated wood. It’s also GREENGUARD Gold certified, so it won’t harm people, pets or the planet.

Bona sprays on easily and dries quickly – there’s no measuring or rinsing or residue. It’s also available in a money-saving refill size of 128 fluid ounces.

Shopping now

Project Details Skill 3 out of 5 Moderate Cost $100 Estimated Time 8-10 hours

Steps to refinish your stair treads:

1. Sand. Start by sanding the treads down to the bare wood with the 80 grit sandpaper. This requires a combination of power sanding and hand sanding to get into the tight corners and around the balustrades. For machine sanding, Nathan uses a random orbit sander equipped with a dust extraction system. He sands as much surface as the eccentric sander can handle and then switches to manual sanding with a sanding block fitted with sandpaper. Be sure to sand with the grain if sanding by hand. Nathan suggests using a scraper in the corners if the old finish won’t come off.

Note: A belt sander is not recommended here; it is too aggressive for this work.

A ½ blade or ¼ blade finish sander can be used in place of an orbital sander, but it’s important to move the sander along the grain and not across it.

A random orbital sander is the quickest way to do this step.

2. Clean. Vacuum between passes, then wipe down the treads with a vacuum cloth. This step ensures that dust and debris such as dirt are not trapped between the sandpaper and treads. Sanding over dust and dirt can leave tiny scratches that will show through once the final finish is applied.

3. Grind again. When you’ve successfully removed the paint and gotten to the bare wood with 80 grit sandpaper, repeat the process with 120 grit sandpaper.

4. Clean again. Thoroughly vacuum the treads and then wipe them down with a vacuum cleaner cloth. Do not wipe the treads with a wet rag as this will dissolve the grain.

5. Treat the wood. If you wish to change the color of the tread, first apply a wood conditioner and then an oil-based stain with a cotton cloth. (If you don’t want to stain the wood, skip to step 7). Make sure all of the previous finish has been removed, otherwise the stain will not absorb properly. The wood conditioner ensures that the stain penetrates the wood evenly. Apply with a brush, cloth or pad. Leave on for about 15 minutes, then remove excess conditioner with a lint-free cloth.

6. Color the stages. Apply the stain liberally with a brush, lint-free cloth or stain pad, then wipe the tread with a lint-free cloth to remove excess stain. Allow the stain to dry for 12 hours. Tip: Do this operation at night or consider doing every other step so the stairs can be used during the finishing process.

7. Apply the finish. Apply a layer of polyurethane to the steps with a brush. A high quality water-based polyurethane is recommended in place of oil-based polyurethane. Water-based polyurethanes dry faster between coats and are easier to work with. Apply the polyurethane with a good quality brush, starting in a corner and working the grain across the tread. Apply the polyurethane slowly and evenly to avoid blisters. Let the polyurethane dry for a few hours.

8. Sand, then repeat two more times. Once the first coat of polyurethane is dry, lightly hand sand it with 220 grit sandpaper. Vacuum and wipe with a vacuum cleaner cloth. Repeat steps 7 and 8 until you have a total of three layers. Do not sand after the third coat.

Resources:

In order to renew stair treads, the old surface must be sanded down completely. To do this, Nathan used a variety of tools, including a Rotex 150 multi-mode sander for most of the tread, a scraper for the corner of the stair, and a Sanding Mouse Hook and Loop sanding block for the area around the balustrades and the nose of the tread. You can find the sanding block online.

To remove the dust, Nathan used a HEPA vacuum with a Festool brush attachment and a tack cloth available at home centers.

To apply a new finish, Nathan used a regular brush and Rust-Oleum water-based polyurethane.

Shopping List:

(Available at The Home Depot)

Tool:

Quick Tips Gather your limestone cleaning supplies.

Vacuum, sweep or wipe dry the limestone surface.

Wet cleaning of the limestone tile.

Clean lime stains.

Rinse your limestone tile.

Reapply the Limestone Sealer as directed.

Limestone is a sedimentary rock commonly used for flooring, wall tiling, counters, shower surfaces, and outdoor paving. While limestone can last a long time (see the Great Pyramid of Giza), it is quite soft. As such, it can be easily scratched, damaged by heat, and etched by acidic substances. Improper care and cleaning can wear down the stone and damage may require professional repair.

In fact, strong detergents that do not have a neutral pH could do more harm than good, as they will destroy the surface of limestone. Here are some simple steps to cleaning limestone. I’ll also share tips for preventing stains and etching so you don’t end up making a mistake that costs as much as fixing your firstborn. Okay, I’m exaggerating, but only a little.

Clean limestone

Gather your limestone cleaning supplies. To clean limestone floors you will need a vacuum, broom or dry mop. You should also have a sponge mop handy. A mild dish soap can be used for this project, but you may want to use a soap specifically formulated for limestone. Last but not least, you need a bucket and some soft towels. Of course, when it comes time to reseal the surface, take some sealer with you too. If you have stains on the limestone that need to be cleaned, be sure to grab some white flour and hydrogen peroxide. Vacuum, sweep or wipe dry the limestone surface. This may sound strange, but you can vacuum limestone floors by turning off the spinning brush. However, be very careful not to scratch the surface. Vacuuming does an excellent job of removing sand and dirt from cracks and crevices. Otherwise, use a broom or dry mop to remove dirt and debris. For counters and walls, use a dry, soft cloth to remove as much dirt as possible. Any particles left on the limestone during a wet cleaning can inflict a variety of scratches on the surface, so try to get everything. Wet cleaning of the limestone tile. To clean limestone, all you need is a bucket of warm water mixed with a few tablespoons of soap. Gently wipe the stone floors or wipe down other surfaces with the mixture. Take your time with this step and give the soap enough time to break down the dirt. Clean lime stains. Removing stains may require an envelope to pull the stain out of the stone. You can make a poultice by taking 3/4 cup flour and adding small amounts of hydrogen peroxide until you have a paste. Apply the paste to the stain and let it dry, which may take a day or two. After drying, carefully remove the dried paste with a soft scraper. Another option is to use a product specifically designed for limestone cleaning and maintenance, such as MB Stone Care MB-1 Floor Cleaner. This product is pH neutral and is designed to remove stains and dirt from stones. To be on the safe side, find an area that no one can see and test the effect first. Rinse your limestone tile. Aside from the fact that soap left on the surface of the limestone attracts dirt and speeds up dirt build-up, it also forms a film that can dull your stone. Start by emptying your mop bucket, rinsing it out thoroughly and filling it with clean, warm water. Wipe the surface with fresh water. What do you see? Any sudsy, soapy sections indicate your work is not done. Repeat this step until it appears that the soap residue has been removed. Reapply the Limestone Sealer as directed. Most limestone is finished with a sealer. Over time, acid spills and deep cleaning can wear away the seal. Reapplication can help better protect your beautiful limestone from stains and damage. When choosing a limestone seal, it pays to invest in a high-quality one. Get some at your local hardware store or tile store. Consult the instructions for correct use.

Limestone, not grimestone

Limestone can be very expensive, so you should take steps to keep it in pristine condition. Remember that caring for your limestone is not an obsession, it is a preservation of your investment. The following tips will help you with this.

Use rugs to prevent dirt, sand, and debris from being left on your floor.

Ask people to remove their shoes before entering a room with limestone.

Wipe up spills immediately to avoid staining.

Never use generic tile products, bathroom cleaners, glass cleaners, or abrasive cleaners to remove stains from limestone.

Sweep or mop dry regularly to avoid accumulation of harmful particles.

Have a soft cloth handy to wipe down the counters regularly. Protect the surface from the elements by using coasters and coasters.

Wipe down the shower walls after each use.

Environmentally friendly limestone cleaners

Miracle Sealants tile and stone cleaner. This stone cleaner is strong enough to be used on stubborn stains and dirt, but is designed to be mild enough to be used on most natural stones, which can be sensitive to acidic cleaners. Miracle Sealant Stone Cleaner is biodegradable and non-acidic, making it a great option for your limestone cleaning needs.

Simple Green Stone Cleaner. Made with ingredients formulated to brighten the shine and appearance of stones without damaging the finish. Simple Green is non-toxic and biodegradable and is safe to use on most stones for regular cleaning. Stone cleaners are useful in that most condition the surface to protect it from spills and wear. You can order bottles of Simple Green Stone Cleaner from Amazon.

microfiber mop. Using a microfiber mop is beneficial in that it can capture the dust and prevent it from polluting your air quality and being redistributed around the room. Regular dry wiping can reduce wear and tear on your stone’s surface, not to mention reduce water wastage. Most microfiber mops can be easily washed and reused multiple times. Check your local hardware store for microfiber dry mops options.

{“smallUrl”:”https:\/\/www.wikihow.com\/images\/thumb\/b\/b6\/Clean-Bluestone-Step-1.jpg\/v4-460px-Clean-Bluestone- Step-1.jpg”,”bigUrl”:”\/images\/thumb\/b\/b6\/Clean-Bluestone-Step-1.jpg\/aid11266795-v4-728px-Clean-Bluestone-Step-1 .jpg”,”smallWidth”:460,”smallHeight”:345,”bigWidth”:728,”bigHeight”:546,”licensing”:”

How do you polish granite steps?

How to Clean Marble Stairs

Learn how to build a LARGE Natural STAIRCASE!

Learn how to build a LARGE Natural STAIRCASE!

Learn how to build a LARGE Natural STAIRCASE!

---

See some more details on the topic caring for a stone staircase here:

How to look after granite stairs? – Fainner

To get r of any kind of dirt or stain, it is enough to sweep the steps, and then clean them with a specialist granite care product. Despite …

+ View More Here

Source: fainner.pl

Date Published: 9/28/2021

View: 2178

10 Easy Way to Clean Stone Stairs in the House

So when making a stone staircase as a hobby, the owner of the house or the mistress has to take care of it. So Let’s See 10 Easy way to Clean …

+ View More Here

Source: justinfoworld.com

Date Published: 6/8/2022

View: 3532

Stone Staircase Cleaning | SMB Restoration Ltd

SMB Restoration LTD are specialists in sensitive historic stone cleaning services for buildings including staircases. We can expertly clean Portland stone …

+ View Here

Source: www.facade-restoration.co.uk

Date Published: 10/21/2021

View: 1430

How to Clean Marble Stairs – Surrey Marble & Granite

Marble care tips · Clean up any spills as soon as possible to protect the quality of the stone · Likewise, use a soft brush to regularly sweep away any debris …

+ View More Here

Source: www.surreymarbleandgranite.co.uk

Date Published: 5/4/2021

View: 4551

How to clean a marble staircase

Marble is a natural material that can add more than a touch of luxury to your home. And there are more ways than you might have thought to incorporate this stunning stone into your home, from countertops to floors and bathrooms. In addition, marble comes in a range of colors, from traditional black and white to fancier, more modern shades of pink and green.

One thing you may not have considered for your home or business space is a marble staircase. But this could be an eye-catcher! And it might be more doable than you thought. However, like any natural stone system, it requires regular maintenance to keep it looking magnificent. (The good news is that this certainly doesn’t have to be complicated.)

Whether you’re lucky enough to already have a marble staircase or are planning to install one, read on!

Tips for cleaning your marble stairs

Regular weekly cleaning of your stairs is the best way forward; More frequent cleaning may be necessary if your household is busy or if you have pets.

First sweep away loose dirt with a soft brush. Then add a mild detergent to a bucket of warm water and mix. Don’t use harsh chemicals or bleach, either of which could damage your stone. Wipe the floor in a circular motion with a clean mop before rinsing with clean, cold water. Then dry with a soft cloth so that your marble does not discolour. (This is important – do not let the stone air dry.)

Seal the deal

Sealing your stone is part of your marble maintenance. And it’s probably worth resealing your marble staircase every three to six months to preserve the stone’s durability and color.

Some final thoughts

As always with marble, wipe up spills immediately. If you want to restore duller areas, use a special marble polishing powder.

And as always, acidic liquids, including wine and fruit juices, can damage marble – wipe up immediately, but even better, be careful not to get on the surface in the first place.

Talk to us at Royal Stone Care

Covering London and the surrounding area, we specialize in marble cleaning for residential and commercial clients. We are used to dealing with marble stairs and can help you whether you need to repair, seal, deep clean or polish marble chips in London.

Get in touch with us right away and let us take care of all the marble maintenance work beyond normal cleaning. Feel free to contact us if you have any questions.

How to clean Natural Stone and what you shouldn’t do!

The stone needs special care to preserve its beauty and elegance over time. Easy care and maintenance will help preserve the beauty of the stone for generations to come. LSI Stone recommends regular cleaning of the natural stone.

Before you start cleaning, these are some important steps to understand the situation you are facing. In order to reduce the stone damage caused by natural and human abrasion on the natural stone, we introduce this article for you to get better results.

First of all, it is important to recognize what type of stone surface you have. Although there are many stone finishes, these three are the most commonly used.

How to Clean Marble Stairs

Why choose marble for your stairs?

If you are looking for a material for your home that gives it that luxurious touch, look no further than marble. An incredible stone that has proven popular over the centuries, its imitation by other materials only proves how desirable this material really is. There are so many ways you can incorporate this stylish stone into your home, from countertops to bathrooms to floors. Marble instantly adds a special touch to any room.

Available in a variety of colours, from classic white and black to modern green and pink, there is a marble style for every space. Perhaps one of the most interesting uses of this material in the home is the marble staircase, which makes an instant statement. The aesthetic value is considerable and you are guaranteed never to get bored climbing the stairs. The durability and versatility of marble make it perfect for such a regularly used area. If you’re looking to transform your home with a new staircase, contact our expert handymen today for this surprisingly doable change that can make a world of difference.

Once your marvelous marble staircase is installed, you may be wondering how to clean marble stairs. Read on to find out.

Maintenance of stone and marble stairs

If your home already has a marble staircase, you can enjoy a piece of luxury every day. However, there are some maintenance tasks that are required to keep your staircase looking its best. Careful treatment of each stone is always advisable, and with a few simple tips you can enjoy your marble staircase for years to come.

Cleaning your marble stairs

We recommend cleaning your marble staircase once a week to ensure it shines, but possibly more frequently if you have a lot of people and pets in your home. First, add a mild detergent to a bucket of hot water and mix. Avoid harsh chemicals and bleach as these can damage your marble. Use a clean mop in a circular motion to clean the floor, paying special attention to hard-to-reach spots on the stairs. Go over the areas after washing with cold clear water. Dry your stairs with a soft, dry cloth to avoid staining the marble. Part of your marble care is to seal the stone to prevent damage, and this is especially important on a staircase that sees regular use. We recommend sealing your marble staircase every 3-6 months to protect the color and durability of the stone.

Care tips for marble

Clean up spills as soon as possible to protect the quality of the stone

Also use a soft brush to regularly remove dirt

Use marble polishing powder to restore dull areas

Never allow marble to air dry as this can cause discoloration

Any acidic liquid can damage marble, including things like wine and fruit juice, so keep these off your stairs

Hopefully we have helped you understand how to clean marble stairs. Maintaining marble is easier than you might think and with a few simple steps you can keep your staircase looking like new. Marble features in your home not only look great, they are an investment that could skyrocket the price of your home and are a great selling point for home buyers. A marble staircase is the highlight of every home and allows you to experience luxury every day. From stairs to countertops and bathrooms, our experts can transform any space with this incredible stone. Call us now to learn more about our comprehensive services.

At Surrey Marble & Granite we also offer granite worktops, quartz worktops and many other worktops in a wide range of styles and colours. Visit our service pages or contact our team for more information!

Related searches to caring for a stone staircase

Information related to the topic caring for a stone staircase

Here are the search results of the thread caring for a stone staircase from Bing. You can read more if you want.

---

You have just come across an article on the topic caring for a stone staircase. If you found this article useful, please share it. Thank you very much.