Ford Excursion Key Fob Programming? The 224 Detailed Answer

Between a dealer and a locksmith, the dealer generally costs more. It is not uncommon for twice as much as the locksmith would charge. Locksmith will also cost you less time with no hidden or additional fees. The dealer has a huge showroom to maintain and a locksmith only has his small shop. So they can pass the savings on to you. The locksmith is also a specialist. They handle both the remote controls and the keys associated with starting and securing your vehicle. If there are any tricks or difficulties that any car can exhibit, they will be able to address them more quickly than a dealer who doesn’t encounter them every day.

The keyless shop in the car locksmith’s shop, specializing in the programming of car remote controls and key fobs. We stock almost all brands and models of car keys and can program them while you wait.

Call us at 800-985-9531 or email us at [email protected] to get a quote and get the best price on your auto locksmith needs.

Well, that depends on several factors. The cost of programming car keys can vary depending on the make and model of your vehicle and whether you are taking it to the dealer or your local auto mechanic. Car key programming ranges from $50 to $500 on the low end. The dealership is usually more expensive than your local auto mechanic.

The Keyless Shop specializes in programming car keys and car remote controls. Call us today and have your key fobs and car remotes programmed quickly and at affordable prices.

This is what The Keyless Shop usually charges for key programming:

Programming transponder keys starts at $50-$75.

This includes keys for GM, Ford, Dodge, Honda, Toyota, Nissan.

If you want to program a new transponder key but don’t have your car’s original key, here are some tips on how to do it.

For security reasons, the remote control key contains a microchip that uses radio waves to activate your vehicle’s ignition system. Without these signals, the ignition will not turn on, which will get you in trouble if you lose the key or have to order a new one. However, you can learn how to program a transponder key without having the original key at hand.

To program the remote control key, insert it into the ignition and turn it to the ON position. Once you receive the security warning, you must wait 15 minutes before proceeding. When the light goes out, you have to repeat the process a total of three times until the key is programmed.

In this guide we take a closer look at what the remote control key is and how it works. We’ll also walk you through the steps and show you how to program it without having the original handy. Our article also touches on the cost of purchasing and programming a new remote control key.

Steps to program a transponder key without original

Here are some simple steps to program your remote control key without the original key if you bought a new key from the dealer. This only works on some car models and in some cases you may need more advanced diagnostic tools. However, these steps are simple and free to try, so do this before calling your authorized dealer. Switch on the ignition Sit in the driver’s seat and insert the key in the ignition. Turn the ignition to the ON position. The security light should come on. If you don’t see the security light, there may be a problem with the car battery. Test the voltage and charge if necessary. Use a car battery charger to ensure the voltage remains stable throughout the process. Wait The security light must remain on for 15 minutes. Don’t mess with the system for at least 15 minutes if you want to program the key. You could set a timer and walk away. After all, there are many things you can do in those 15 minutes of waiting. Power cycle Once you have waited 15 minutes the security light should turn off. You must return to the key within three minutes of this event, so keep a close eye on it. Turn the key to the OFF position and turn it back ON. Here, too, the safety light remains switched on for 15 minutes. Repeat steps The safety light will turn off after about 15 minutes. You will repeat the same actions as in the previous step. Turn the key off and on again. This should bring the security light back on. If you wait another 15 minutes you might be exhausted. However, this should be the last time you need to perform this step.

After following these simple steps for 45 minutes, the key should be generated and ready to use.

Test the key and make sure it starts the car. Just remember that the original key is no longer useful. If you find it after programming a new key, it will no longer work.

RELATED: How to Program a Keychain by Yourself at Home (8 Easy Steps)

Which vehicles use remote control keys?

Almost every brand new car on the market today has a remote control key. All major brands use this technology, including Chevy, Ford, Nissan, Toyota and Chrysler. In addition, the luxury car manufacturers also use transponder keys, so you can find them on Mercedes Benz, BMW, Genesis and Audi models.

If you have an older vehicle, you may also need a remote control key. Ford introduced the technology to more expensive models in 1996, but slowly integrated it across the board over the years. For example, all 2001 Ranger pickups came with remote control keys. Also, the F-150 was made with the remote control key from 1999 to 2003.

Jeep made the transponder key optional starting with the 1998 Wrangler. It wasn’t until 2007 that the Wrangler came standard with the transponder.

RELATED: 5 Signs of a Bad Immobilizer or Remote Key (& Cost of Replacement)

How to tell if you have a transponder key

1. Key Database

The easiest way to find out if you have a remote control key is to check with the retailer. You can also contact a locksmith who keeps a database of car key types.

By providing your vehicle details, the dealer or locksmith can tell you what type of key you have. Each of them is also able to get you a new key.

2. Security light

If your vehicle has a remote control key, there is a security light on the vehicle’s dashboard. On some vehicles, the light shows an image of a lock, but it could also be a key or provide the letters “sec.” You may see this security light on the dashboard.

When you turn on the vehicle, this security light will flash. If the remote control key works, the security light will go off immediately. However, if the transponder needs to be programmed, it will continue to flash.

3. Identification

The side of your key should have an identification number printed with letters and numbers. This is the key identification code. You can use this information to research the key or have a locksmith examine it.

In addition, the transponder key is equipped with a chip that is located in the head. The plastic head is larger than a simple mechanical key and helps you determine if a transponder is included. If all else fails, you can research your car’s model to see if it requires a remote control key.

4. Testing

Locksmiths have special devices that are made just for this purpose. If you can’t figure out what type of key you have, take it with you to test.

The machine can detect whether a transponder is included or not. Also, the locksmith can help you program it if you don’t want to mess with it.

Cost of replacing the remote control key

Each car type requires a different key, but the average cost could range from $125 to $300. You can only buy the key and program it yourself.

However, if you want to avoid the hassle, it might be better to have it programmed for you. While the dealership will handle this, you could save a little money with a local locksmith instead.

frequently asked Questions

Hi. You can reprogram a key fob to another vehicle as long as the key for the vehicle is the same. In this case, if the key fits in the doors and unlocks them, you need to do the following:

Remove the battery from the key fob and reinsert it (unless you are installing a new battery).

Disconnect the battery cables from the vehicle, wait 30 seconds, and then reconnect them (reset the computer).

Insert the key in the ignition and turn the key to the “ON” position.

Turn the key to the “OFF” position.

Turn the key to the “ON” position and lock the door with your hand and the remote control at the same time.

Turn the key to the “OFF” position.

Turn the key to the “ON” position and unlock the door with your hand and the remote control at the same time.

Turn the key to the “OFF” position.

Remove the key from the ignition lock.

Put the key in the driver’s door

Unlock and lock the door with the key and simultaneously press the lock and unlock buttons on the fob – (do this 3 times).

Take the key out of the door and with the door closed try to unlock the doors with the remote control.

If the doors lock, put the key in the ignition and try to start the engine.

If the engine starts after these steps, the key fob has been successfully reprogrammed to your vehicle. If the key doesn’t start the engine or lock the doors, the key may be different altogether and you would need to get a new key. If you need further help with your keyless entry system, contact a professional, e.g. B. one from Your Mechanic who will help you.

If your key fob suddenly stops working, it may be because it has lost its programming data. Here is a step-by-step guide to reprogramming key fobs without special tools

Electronic car keys, also known as key fobs, are useful in controlling your car’s doors, trunk and alarm, and can even start your car remotely.

Like any other electronic device, these key fobs can fail over time, typically due to loss of signal. In such a case, however, you can easily reprogram the remote control yourself so that you can continue to use it.

This article explains step by step how to program your car key so you don’t have to take it to a car dealer and spend your precious money.

How to program a key fob

Different car models have different ways of programming their key fobs. The process mentioned below is the easiest way to reprogram a remote in general. This guide works with most car models on the market, but sometimes you need to find specific information for your car model. For more information about your car’s remote control, see the owner’s manual. Follow these steps to program a key fob at home: 1. Replace the batteries in the key fobs Before doing anything else, replace the batteries in the key fob(s) if you haven’t done so in a while. A bad keychain battery can give you a real headache trying to reprogram it. The batteries are often cheap and easy to replace. Check your owner’s manual if you don’t know how to replace it. 2. Get in the car With your car keys and remote control, get in the driver’s seat and close all the doors. Closing the doors is very important as leaving one open can disrupt the process. 3. Turn on the ignition. Insert the key in the ignition switch and turn it to the “On” position to provide power to the electrical systems. Make sure the ignition is not in radio mode and do not start the engine. 4. Press the lock button on the remote control. With the key in the “on” position, press the key fob lock button and turn the key back to the “off” position. Repeat this process at least three times, completing the cycle with the key in the “on” position. This sends an indication to your electronic control units that your key in the ignition is sending out the signal and then stores the data.

RELATED ARTICLE: How to Unlock and Start a Car With a Dead Key Fob This Indicates You’ve Entered Programming Mode. Once this is done, press the lock button again within five seconds and the programming will be successful. 6. Programming additional remotes If there are additional remotes, press the lock button within 10 seconds of entering programming mode to successfully program those remotes as well. 7. Turn off the ignition Once the above steps have been completed, turn the ignition back to the off position to complete the programming process. 8. Get out of your car and test the result. Take your key fobs with you and exit the vehicle and close all doors. Test both unlocks with any of your key fobs that have been programmed to verify functionality.

Estimated cost: $5

Special hardware required for key fob programming

Key fob programming may not be easy on some cars and special hardware may be required in this car. Normally we would suggest calling your authorized car dealer, but this can get expensive.

You can have your car radio key recoded at any other car locksmith or a car workshop at a comparatively lower price and have a separate master key made.

Creating a new master key may require a code card, which can be found in your vehicle’s manual.

RELATED: Lost Car Keys Cost & Replacement Keys

Understand vehicle safety

Car safety can be divided into two categories – car entry and car starting.

In most modern cars you don’t need to insert keys to open the doors as they have remote locking/unlocking. The older remote car entry systems used RF systems which were not completely secure as their signal could be easily captured and played back to unlock and enter the vehicle.

The modern access locks use a more sophisticated rolling code system that generates a new code each time. The receiver on the vehicle also generates the same code so that both electronic devices are synchronized. Infrared systems were also used by some European manufacturers who had to point the remote control at the car to unlock. However, most have now been superseded by RF technology.

Speaking of starting the vehicle, traditional cars had a simple key lock system that could be unlocked with any similar key. This was convenient for thieves as they could easily drive away with any car. However, new cars have ECU technology and a transponder for added security.

Luxury vehicles can be coded according to the driver’s specifications. For example, vehicles like Rolls-Royce have a memory function and as long as the driver inserts the key, the seats, headrest, mirrors and steering wheel are adjusted according to the driver’s settings.

Manufacturers are now working on eliminating the key entirely and adding a fingerprint recognition system.

What is a transponder?

Transponder technology is now evident in many areas requiring security access and is now popular in modern automobiles. New vehicle keys now have a transponder chip, and when the key is placed in the ignition switch, the chip is triggered by the radio frequency signal sent by the ignition switch.

The chip then sends a signal to the car’s ECU which, if proven correct, will disable the immobilizer and start the engine.

Who Leaves Ratings and Reviews?

Ratings and reviews are provided by customers who have either purchased a vehicle or visited a dealer for service.

How are ratings and reviews collected?

Customers are invited to participate in a survey conducted by MaritzCX, an independent third party.

Can merchants edit or remove ratings?

no Ford employees and/or dealers cannot change or remove ratings.

Are reviews modified or monitored before publication?

MaritzCX moderates public reviews to ensure they contain content that adheres to the review guidelines, such as: e.g.:

‣No profanity or inappropriate defamatory remarks

‣Fraud

‣No personally identifiable information (e.g. customer phone number or email address)

‣No competitor references (e.g. other brand or retailer)

‣Dangerous behavior (e.g. threatening to harm employees or others)

‣Lack of appropriate text (e.g. symbols, emojis and random letters)

Reviews about the product and not the customer’s sales or service experience

Hi. You can reprogram a key fob to another vehicle as long as the key for the vehicle is the same. In this case, if the key fits in the doors and unlocks them, you need to do the following:

Remove the battery from the key fob and reinsert it (unless you are installing a new battery).

Disconnect the battery cables from the vehicle, wait 30 seconds, and then reconnect them (reset the computer).

Insert the key in the ignition and turn the key to the “ON” position.

Turn the key to the “OFF” position.

Turn the key to the “ON” position and lock the door with your hand and the remote control at the same time.

Turn the key to the “OFF” position.

Turn the key to the “ON” position and unlock the door with your hand and the remote control at the same time.

Turn the key to the “OFF” position.

Remove the key from the ignition lock.

Put the key in the driver’s door

Unlock and lock the door with the key and simultaneously press the lock and unlock buttons on the fob – (do this 3 times).

Take the key out of the door and with the door closed try to unlock the doors with the remote control.

If the doors lock, put the key in the ignition and try to start the engine.

If the engine starts after these steps, the key fob has been successfully reprogrammed to your vehicle. If the key doesn’t start the engine or lock the doors, the key may be different altogether and you would need to get a new key. If you need further help with your keyless entry system, contact a professional, e.g. B. one from Your Mechanic who will help you.

Who Leaves Ratings and Reviews?

Ratings and reviews are provided by customers who have either purchased a vehicle or visited a dealer for service.

How are ratings and reviews collected?

Customers are invited to participate in a survey conducted by MaritzCX, an independent third party.

Can merchants edit or remove ratings?

no Ford employees and/or dealers cannot change or remove ratings.

Are reviews modified or monitored before publication?

MaritzCX moderates public reviews to ensure they contain content that adheres to the review guidelines, such as: e.g.:

‣No profanity or inappropriate defamatory remarks

‣Fraud

‣No personally identifiable information (e.g. customer phone number or email address)

‣No competitor references (e.g. other brand or retailer)

‣Dangerous behavior (e.g. threatening to harm employees or others)

‣Lack of appropriate text (e.g. symbols, emojis and random letters)

Reviews about the product and not the customer’s sales or service experience

The Ford key fob is a great convenience, but it can also be a source of frustration when it’s not working properly. If your Ford key fob isn’t working after changing the battery, there are a few things you can try to get it working again.

This is a common problem faced by many Ford owners. In this blog post, we will discuss the causes of this problem and how to fix it.

The fact that your Ford key fob no longer works after a battery change is probably due to the battery change itself. The key fob must be put back on the car in the key fob remote control after the battery change because the key was erased when the battery was changed. Because of this, nothing works with your key fob remote.

You will need to reprogram the remote to the vehicle once you have replaced the battery in your key fob remote.

What is a keychain?

A key fob is a small handheld remote control that you can use to remotely lock and unlock your car doors. It can also be used to activate the panic alarm on your car. Key fobs typically have buttons to lock and unlock the doors and a button to activate the panic alarm.

How a keychain works

A key fob works by sending a radio signal to a receiver located in the car. The receiver then activates the locks or alarm.

Key fobs use rolling codes, which means that each time you press a button on the remote, a different code is sent to the receiver. This makes it difficult for someone to intercept the signal and unlock your car without your permission.

Reasons why your Ford key fob may not work after a battery change?

As previously mentioned, one of the most common reasons why your Ford key fob may not work after changing the battery is that it needs to be reset.

If you’ve replaced the battery in your key fob remote and it’s still not working, it could be due to one of the following:

The key fob remote has not been programmed correctly for the vehicle

The key fob must be properly programmed to the vehicle in order for it to function. If you have replaced the battery in your key fob remote and it still does not work, the remote may not have been programmed correctly for the vehicle.

The receiver doesn’t work

The receiver receives the signal from the key fob remote and activates the locks or alarm. If the receiver doesn’t work, the key fob can’t communicate with it and it won’t work.

The battery in the key fob remote is low

Even if you just replaced the battery in your key fob remote, the battery may already be low. Key fobs use a lot of electricity and the batteries don’t last very long. If the battery in your key fob remote is low, it will not be able to communicate with the receiver.

There is a problem with the key fob remote itself

If you’ve replaced the battery in your key fob remote and it still doesn’t work, there may be a problem with the key fob remote itself. It is possible that the key fob is damaged or has not been properly programmed for the vehicle.

How do I reset my Ford key fob?

If your Ford key fob does not work after changing the battery, you will need to reset it on the vehicle. This can be done by following these steps:

Start with the key removed and the doors closed. Insert and remove the key from the ignition six times within ten seconds. Leave the key in the ignition and turn it to the “on” position. Turn the key to the off position and remove it from the ignition. The doors should now lock and then unlock, indicating the reset is complete

If you have followed these steps and your Ford key fob is still not working, there may be a problem with the key fob itself. You may need to take it to a dealer or locksmith to have it programmed or replaced.

How do I change the battery in a Ford Key Fob?

Replacing the battery in your Ford key fob is a fairly simple process. You only need a few tools and you can get it done in minutes.

What you will need:

A small slotted screwdriver

A new CR2032 battery

Instructions:

Start with the small flathead screwdriver to remove the cover from the back of the key fob. Once the cover is removed you should see the battery.

Use the flathead screwdriver to gently pry out the old battery, then insert the new one, making sure the positive side (the + sign) is facing up.

Once the new battery is in place, put the cover back on and you’re done.

Your Ford key fob should now function properly. If it still doesn’t work, you may need to take it to a dealer or locksmith to have it reprogrammed or replaced.

How much does it cost to replace a Ford key fob?

If you need to replace your Ford key fob, the cost will depend on a few factors. The most important factor is whether you let the dealer do it or whether you do it yourself.

If you take your Ford key fob to the dealer to have it replaced, the cost will range from $75 to $200 depending on the dealer and the type of key fob you have.

But if you decide to replace your Ford key fob yourself, you can expect to pay anywhere from $20 to $60 for a new key fob, depending on where you buy it.

How do I know if my Ford key fob needs to be reset?

If you have replaced the battery in your Ford key fob and it still does not work, you will need to put it back on the vehicle.

This can be done by following these steps:

Start with the key removed and the doors closed

Insert and remove the key from the ignition switch six times within ten seconds

With the key in the ignition and turning it to the “on” position, press and release the lock button on the fob

Turn the key to the off position and remove it from the ignition and the doors should now lock and then unlock, indicating the reset is complete.

How often should I change the battery in my Ford key fob?

Key fobs use a lot of electricity and the batteries don’t last very long. It is recommended that you replace the battery in your Ford key fob every year or two to ensure it is working properly.

What type of battery does my Ford key fob use?

Most Ford key fobs use a CR2032 battery. This is a small, coin-sized battery that is available at most hardware stores or online.

Conclusion

One of the most common reasons your Ford key fob may not work after changing the battery is that it needs to be reset.

If you have replaced the battery in your key fob and it still does not work, the reasons may be: the key fob has not been programmed correctly for the vehicle, the receiver is not working, the battery in the key fob is low, or there is a problem with the key fob remote itself.